ShuriZma
/
xemu
mirror of https://github.com/xemu-project/xemu.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
107,520 Commits 14 Branches 185 Tags 485 MiB
Commit Graph

45 Commits

Author SHA1 Message Date
Richard Henderson 871a7f6a9a tests/tcg/aarch64: Adjust pauth tests for FEAT_FPAC 
With FEAT_FPAC, AUT* instructions that fail authentication
do not produce an error value but instead fault.

For pauth-2, install a signal handler and verify it gets called.

For pauth-4 and pauth-5, we are explicitly testing the error value,
so there's nothing to test with FEAT_FPAC, so exit early.
Adjust the makefile to use -cpu neoverse-v1, which has FEAT_EPAC
but not FEAT_FPAC.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230829232335.965414-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
 2023-09-08 12:50:44 +01:00
Alex Bennée bb16cb4519 tests/tcg: remove quoting for info output 
This avoids ugly multi-line wrapping for the test on non V=1 builds.

Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230829161528.2707696-4-alex.bennee@linaro.org>
 2023-08-30 14:57:44 +01:00
Richard Henderson 6a2c23ddeb accel/tcg: Avoid reading too much in load_atom_{2,4} 
When load_atom_extract_al16_or_al8 is inexpensive, we want to use
it early, in order to avoid the overhead of required_atomicity.
However, we must not read past the end of the page.

If there are more than 8 bytes remaining, then both the "aligned 16"
and "aligned 8" paths align down so that the read has at least
16 bytes remaining on the page.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
 2023-08-10 10:59:24 -07:00
Richard Henderson ca1e9c3ba1 tests/multiarch: Add test-aes 
Use a shared driver and backends for i386, aarch64, ppc64, riscv64.

Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
 2023-07-08 07:30:17 +01:00
Richard Henderson 1f51573f79 target/arm: Fix SME full tile indexing 
For the outer product set of insns, which take an entire matrix
tile as output, the argument is not a combined tile+column.
Therefore using get_tile_rowcol was incorrect, as we extracted
the tile number from itself.

The test case relies only on assembler support for SME, since
no release of GCC recognizes -march=armv9-a+sme yet.

Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1620
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230622151201.1578522-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: dropped now-unneeded changes to sysregs CFLAGS]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
 2023-07-06 12:56:21 +01:00
Peter Maydell 3dc2afeab2 tests/tcg/aarch64/sysregs.c: Use S syntax for id_aa64zfr0_el1 and id_aa64smfr0_el1 
Some assemblers will complain about attempts to access
id_aa64zfr0_el1 and id_aa64smfr0_el1 by name if the test
binary isn't built for the right processor type:

 /tmp/ccASXpLo.s:782: Error: selected processor does not support system register name 'id_aa64zfr0_el1'
 /tmp/ccASXpLo.s:829: Error: selected processor does not support system register name 'id_aa64smfr0_el1'

However, these registers are in the ID space and are guaranteed to
read-as-zero on older CPUs, so the access is both safe and sensible.
Switch to using the S syntax, as we already do for ID_AA64ISAR2_EL1
and ID_AA64MMFR2_EL1.  This allows us to drop the HAS_ARMV9_SME check
and the makefile machinery to adjust the CFLAGS for this test, so we
don't rely on having a sufficiently new compiler to be able to check
these registers.

This means we're actually testing the SME ID register: no released
GCC yet recognizes -march=armv9-a+sme, so that was always skipped.
It also avoids a future problem if we try to switch the "do we have
SME support in the toolchain" check from "in the compiler" to "in the
assembler" (at which point we would otherwise run into the above
errors).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
 2023-07-06 12:38:19 +01:00
Alex Bennée 6d03226b42 plugins: force slow path when plugins instrument memory ops 
The lack of SVE memory instrumentation has been an omission in plugin
handling since it was introduced. Fortunately we can utilise the
probe_* functions to force all all memory access to follow the slow
path. We do this by checking the access type and presence of plugin
memory callbacks and if set return the TLB_MMIO flag.

We have to jump through a few hoops in user mode to re-use the flag
but it was the desired effect:

 ./qemu-system-aarch64 -display none -serial mon:stdio \
   -M virt -cpu max -semihosting-config enable=on \
   -kernel ./tests/tcg/aarch64-softmmu/memory-sve \
   -plugin ./contrib/plugins/libexeclog.so,ifilter=st1w,afilter=0x40001808 -d plugin

gives (disas doesn't currently understand st1w):

  0, 0x40001808, 0xe54342a0, ".byte 0xa0, 0x42, 0x43, 0xe5", store, 0x40213010, RAM, store, 0x40213014, RAM, store, 0x40213018, RAM

And for user-mode:

  ./qemu-aarch64 \
    -plugin contrib/plugins/libexeclog.so,afilter=0x4007c0 \
    -d plugin \
    ./tests/tcg/aarch64-linux-user/sha512-sve

gives:

  1..10
  ok 1 - do_test(&tests[i])
  0, 0x4007c0, 0xa4004b80, ".byte 0x80, 0x4b, 0x00, 0xa4", load, 0x5500800370, load, 0x5500800371, load, 0x5500800372, load, 0x5500800373, load, 0x5500800374, load, 0x5500800375, load, 0x5500800376, load, 0x5500800377, load, 0x5500800378, load, 0x5500800379, load, 0x550080037a, load, 0x550080037b, load, 0x550080037c, load, 0x550080037d, load, 0x550080037e, load, 0x550080037f, load, 0x5500800380, load, 0x5500800381, load, 0x5500800382, load, 0x5500800383, load, 0x5500800384, load, 0x5500800385, load, 0x5500800386, lo
  ad, 0x5500800387, load, 0x5500800388, load, 0x5500800389, load, 0x550080038a, load, 0x550080038b, load, 0x550080038c, load, 0x550080038d, load, 0x550080038e, load, 0x550080038f, load, 0x5500800390, load, 0x5500800391, load, 0x5500800392, load, 0x5500800393, load, 0x5500800394, load, 0x5500800395, load, 0x5500800396, load, 0x5500800397, load, 0x5500800398, load, 0x5500800399, load, 0x550080039a, load, 0x550080039b, load, 0x550080039c, load, 0x550080039d, load, 0x550080039e, load, 0x550080039f, load, 0x55008003a0, load, 0x55008003a1, load, 0x55008003a2, load, 0x55008003a3, load, 0x55008003a4, load, 0x55008003a5, load, 0x55008003a6, load, 0x55008003a7, load, 0x55008003a8, load, 0x55008003a9, load, 0x55008003aa, load, 0x55008003ab, load, 0x55008003ac, load, 0x55008003ad, load, 0x55008003ae, load, 0x55008003af

(4007c0 is the ld1b in the sha512-sve)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Robert Henry <robhenry@microsoft.com>
Cc: Aaron Lindsay <aaron@os.amperecomputing.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-20-alex.bennee@linaro.org>
 2023-07-03 12:51:58 +01:00
Zhuojia Shen c81e4ab370 tests/tcg/aarch64: add DC CVA[D]P tests 
Test execution of DC CVAP and DC CVADP instructions under user mode
emulation.

Signed-off-by: Zhuojia Shen <chaosdefinition@hotmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
 2023-06-06 10:19:40 +01:00
Alex Bennée d044b7c33a tests/tcg: limit the scope of the plugin tests 
Running every plugin with every test is getting excessive as well as
not really improving coverage that much. Restrict the plugin tests to
just the MULTIARCH_TESTS which are shared between most architecture
for both system and user-mode. For those that aren't we need to squash
MULTIARCH_TESTS so we don't add them when they are not part of the
TESTS global.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230424092249.58552-14-alex.bennee@linaro.org>
 2023-04-27 14:58:23 +01:00
Alex Bennée bcbc36a98f testing: probe gdb for supported architectures ahead of time 
Currently when we encounter a gdb that is old or not built with
multiarch in mind we fail rather messily. Try and improve the
situation by probing ahead of time and setting
HOST_GDB_SUPPORTS_ARCH=y in the relevant tcg configs. We can then skip
and give a more meaningful message if we don't run the test.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230302190846.2593720-24-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-24-richard.henderson@linaro.org>
 2023-03-07 20:44:09 +00:00
Zhuojia Shen bc6bd20ee3 target/arm: align exposed ID registers with Linux 
In CPUID registers exposed to userspace, some registers were missing
and some fields were not exposed.  This patch aligns exposed ID
registers and their fields with what the upstream kernel currently
exposes.

Specifically, the following new ID registers/fields are exposed to
userspace:

ID_AA64PFR1_EL1.BT:       bits 3-0
ID_AA64PFR1_EL1.MTE:      bits 11-8
ID_AA64PFR1_EL1.SME:      bits 27-24

ID_AA64ZFR0_EL1.SVEver:   bits 3-0
ID_AA64ZFR0_EL1.AES:      bits 7-4
ID_AA64ZFR0_EL1.BitPerm:  bits 19-16
ID_AA64ZFR0_EL1.BF16:     bits 23-20
ID_AA64ZFR0_EL1.SHA3:     bits 35-32
ID_AA64ZFR0_EL1.SM4:      bits 43-40
ID_AA64ZFR0_EL1.I8MM:     bits 47-44
ID_AA64ZFR0_EL1.F32MM:    bits 55-52
ID_AA64ZFR0_EL1.F64MM:    bits 59-56

ID_AA64SMFR0_EL1.F32F32:  bit 32
ID_AA64SMFR0_EL1.B16F32:  bit 34
ID_AA64SMFR0_EL1.F16F32:  bit 35
ID_AA64SMFR0_EL1.I8I32:   bits 39-36
ID_AA64SMFR0_EL1.F64F64:  bit 48
ID_AA64SMFR0_EL1.I16I64:  bits 55-52
ID_AA64SMFR0_EL1.FA64:    bit 63

ID_AA64MMFR0_EL1.ECV:     bits 63-60

ID_AA64MMFR1_EL1.AFP:     bits 47-44

ID_AA64MMFR2_EL1.AT:      bits 35-32

ID_AA64ISAR0_EL1.RNDR:    bits 63-60

ID_AA64ISAR1_EL1.FRINTTS: bits 35-32
ID_AA64ISAR1_EL1.BF16:    bits 47-44
ID_AA64ISAR1_EL1.DGH:     bits 51-48
ID_AA64ISAR1_EL1.I8MM:    bits 55-52

ID_AA64ISAR2_EL1.WFxT:    bits 3-0
ID_AA64ISAR2_EL1.RPRES:   bits 7-4
ID_AA64ISAR2_EL1.GPA3:    bits 11-8
ID_AA64ISAR2_EL1.APA3:    bits 15-12

The code is also refactored to use symbolic names for ID register fields
for better readability and maintainability.

The test case in tests/tcg/aarch64/sysregs.c is also updated to match
the intended behavior.

Signed-off-by: Zhuojia Shen <chaosdefinition@hotmail.com>
Message-id: DS7PR12MB6309FB585E10772928F14271ACE79@DS7PR12MB6309.namprd12.prod.outlook.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: use Sn_n_Cn_Cn_n syntax to work with older assemblers
that don't recognize id_aa64isar2_el1 and id_aa64mmfr2_el1]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
 2023-01-05 14:12:34 +00:00
Paolo Bonzini 15b273f8e6 tests/tcg: move compiler tests to Makefiles 
Further decoupling of tests/tcg from the main QEMU Makefile, and making
the build more similar between the cross compiler case and the vetted
container images.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-25-alex.bennee@linaro.org>
 2022-10-06 11:53:40 +01:00
Paolo Bonzini c6cf8a2052 tests/tcg: clean up calls to run-test 
Almost all invocations of run-test have either "$* on $(TARGET_NAME)"
or "$< on $(TARGET_NAME)" as the last argument.  So provide a default
test name, while allowing an escape hatch for custom names.

As an additional simplification, remove the need to do shell quoting.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-24-alex.bennee@linaro.org>
 2022-10-06 11:53:40 +01:00
Richard Henderson cda86e2b46 target/arm: Enable SCTLR_EL1.BT0 for aarch64-linux-user 
This controls whether the PACI{A,B}SP instructions trap with BTYPE=3
(indirect branch from register other than x16/x17).  The linux kernel
sets this in bti_enable().

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/998
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220427042312.294300-1-richard.henderson@linaro.org
[PMM: remove stray change to makefile comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
 2022-05-05 09:35:50 +01:00
Paolo Bonzini f084839aba tests/tcg: add compiler test variables when using containers 
Even for container-based cross compilation use $(CROSS_CC_HAS_*) variables.
This makes the TCG test makefiles oblivious of whether the compiler is
invoked through a container or not.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220401141326.1244422-10-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-13-alex.bennee@linaro.org>
 2022-04-20 16:04:20 +01:00
Richard Henderson b17ab4705c target/arm: Fix sve2 ldnt1 and stnt1 
For both ldnt1 and stnt1, the meaning of the Rn and Rm are different
from ld1 and st1: the vector and integer registers are reversed, and
the integer register 31 refers to XZR instead of SP.

Secondly, the 64-bit version of ldnt1 was being interpreted as
32-bit unpacked unscaled offset instead of 64-bit unscaled offset,
which discarded the upper 32 bits of the address coming from
the vector argument.

Thirdly, validate that the memory element size is in range for the
vector element size for ldnt1.  For ld1, we do this via independent
decode patterns, but for ldnt1 we need to do it manually.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/826
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220308031655.240710-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
 2022-03-18 10:55:15 +00:00
Alex Bennée f8a4c6d728 tests/tcg: add vectorised sha512 versions 
This builds vectorised versions of sha512 to exercise the vector code:

  - aarch64 (AdvSimd)
  - i386 (SSE)
  - s390x (MVX)
  - ppc64/ppc64le (power10 vectors)

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-14-alex.bennee@linaro.org>
 2022-02-28 16:42:35 +00:00
Alex Bennée c96e593a7e tests/tcg: build sha1-vector with O3 and compare 
The aim of this is to test code generation for vectorised operations.
Unfortunately gcc struggles to do much with the messy sha1 code (try
-fopt-info-vec-missed to see why). However it's better than nothing.

We assume the non-vectorised output is gold and baring compiler bugs
the outputs should match.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-12-alex.bennee@linaro.org>
 2022-02-28 16:42:25 +00:00
Richard Henderson 0bdce4861f tests/tcg: Add arm and aarch64 pc alignment tests 
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
 2021-12-15 10:35:26 +00:00
Richard Henderson d3327a38cd target/arm: Fix mte page crossing test 
The test was off-by-one, because tag_last points to the
last byte of the tag to check, thus tag_last - prev_page
will equal TARGET_PAGE_SIZE when we use the first byte
of the next page.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/403
Reported-by: Peter Collingbourne <pcc@google.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210612195707.840217-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
 2021-06-16 14:33:51 +01:00
Richard Henderson 09641ef931 test/tcg/aarch64: Add mte-5 
Buglink: https://bugs.launchpad.net/bugs/1921948
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210416183106.1516563-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
 2021-04-30 11:16:49 +01:00
Richard Henderson eb42297a59 accel/tcg: Preserve PAGE_ANON when changing page permissions 
Using mprotect() to change PROT_* does not change the MAP_ANON
previously set with mmap().  Our linux-user version of MTE only
works with MAP_ANON pages, so losing PAGE_ANON caused MTE to
stop working.

Reported-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
 2021-04-12 11:06:24 +01:00
Alex Bennée 3539d84df1 semihosting: move semihosting tests to multiarch 
It may be arm-compat-semihosting but more than one architecture uses
it so lets move the tests into the multiarch area. We gate it on the
feature and split the semicall.h header between the arches.

Also clean-up a bit of the Makefile messing about to one common set of
runners.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323165308.15244-6-alex.bennee@linaro.org>
 2021-03-24 14:25:03 +00:00
Richard Henderson 36cd5fbdbf tests/tcg/aarch64: Add mte smoke tests 
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
 2021-02-16 13:17:28 +00:00
Richard Henderson 1d9ac91baf tests/tcg/aarch64: Add bti smoke tests 
The note test requires gcc 10 for -mbranch-protection=standard.
The mmap test uses PROT_BTI and does not require special compiler support.

Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201021173749.111103-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
 2020-10-27 10:44:03 +00:00
Richard Henderson 8796fe40dd target/arm: Fix AddPAC error indication 
The definition of top_bit used in this function is one higher
than that used in the Arm ARM psuedo-code, which put the error
indication at top_bit - 1 at the wrong place, which meant that
it wasn't visible to Auth.

Fixing the definition of top_bit requires more changes, because
its most common use is for the count of bits in top_bit:bot_bit,
which would then need to be computed as top_bit - bot_bit + 1.

For now, prefer the minimal fix to the error indication alone.

Fixes: 63ff0ca94c
Reported-by: Derrick McKee <derrick.mckee@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200728195706.11087-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added comment about the divergence from the pseudocode]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
 2020-08-03 17:55:03 +01:00
Alex Bennée d16242e524 tests/tcg: ensure -cpu max also used for plugin run 
The check-tcg plugins build was failing because some special case
tests that needed -cpu max failed because the plugin variant hadn't
carried across the QEMU_OPTS tweak.

Guests which globally set QEMU_OPTS=-cpu FOO where unaffected.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200615141922.18829-3-alex.bennee@linaro.org>
 2020-06-16 14:49:05 +01:00
Alex Bennée fefa027154 tests/tcg: build plugin list from contents of src directory 
If you jump back and forth between branches while developing plugins
you end up debugging failures caused by plugins left in the build
directory. Fix this by basing plugins on the source tree instead.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200615141922.18829-2-alex.bennee@linaro.org>
 2020-06-16 14:49:05 +01:00
Alex Bennée df3ca22318 tests/tcg: add a multiarch linux-user gdb test 
When the gdbstub code was converted to the new API we missed a few
snafus in the various guests. Add a simple gdb test script which can
be used on all our linux-user guests to check for obvious failures.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200430190122.4592-9-alex.bennee@linaro.org>
 2020-05-06 09:29:26 +01:00
Alex Bennée f4a23e1797 tests/tcg/aarch64: add test-sve-ioctl guest-debug test 
This test exercises the gdbstub while runing the sve-iotcl test. I
haven't plubmed it into make system as we need a way of verifying if
gdb has the right support for SVE.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200316172155.971-26-alex.bennee@linaro.org>
 2020-03-17 17:38:47 +00:00
Alex Bennée 2b6d6371a9 tests/tcg/aarch64: add SVE iotcl test 
This is a fairly bare-bones test of setting the various vector sizes
for SVE which will only fail if the PR_SVE_SET_VL can't reduce the
user-space vector length by powers of 2.

However we will also be able to use it in a future test which
exercises the GDB stub.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200316172155.971-25-alex.bennee@linaro.org>
 2020-03-17 17:38:47 +00:00
Alex Bennée cf58773f1c tests/tcg/aarch64: add a gdbstub testcase for SVE registers 
A very simple test case which sets and reads SVE registers while
running a test case. We don't really need to compile a SVE binary for
this case but we will later so keep it simple for now.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200316172155.971-24-alex.bennee@linaro.org>
 2020-03-17 17:38:47 +00:00
Alex Bennée fe185734d0 tests/tcg/aarch64: userspace system register test 
This tests a bunch of registers that the kernel allows userspace to
read including the CPUID registers. We need a SVE aware compiler as we
are testing the id_aa64zfr0_el1 register in the set.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200316172155.971-21-alex.bennee@linaro.org>
 2020-03-17 17:38:38 +00:00
Alex Bennée bb516dfc5b tests/tcg: gate pauth-% tests on having compiler support 
Otherwise we end up failing to build our tests on CI which may have
older compilers that the user expects. We can get rid of this once we
can fallback to multiarch containers.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200203090932.19147-14-alex.bennee@linaro.org>
 2020-02-04 17:13:29 +00:00
Richard Henderson dd684ead29 tests/tcg/aarch64: Add pauth-4 
Perform the set of operations and test described in LP 1859713.

Suggested-by: Adrien GRASSEIN <adrien.grassein@smile.fr>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200116230809.19078-5-richard.henderson@linaro.org
[PMM: fixed hard-coded tabs]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
 2020-01-23 15:22:39 +00:00
Richard Henderson fdd9b09413 tests/tcg/aarch64: Fix compilation parameters for pauth-% 
We were incorrectly requiring ARMv8.4 support for the pauth
tests, but Pointer Authentication is an ARMv8.3 extension.
Further, hiding the required architecture within asm() is
not correct.

Correct the architecture version requested, and specify it
in the cflags of the (cross-) compiler rather than in the asm.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200116230809.19078-3-richard.henderson@linaro.org
[PMM: tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
 2020-01-23 15:22:38 +00:00
Alex Bennée 486e58b188 tests/tcg: add user version of dumb-as-bricks semiconsole test 
There are linux-user users of semihosting so we'd better check things
work for them as well.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
 2020-01-09 11:41:29 +00:00
Alex Bennée 3089e74e67 tests/tcg: enable plugin testing 
If CONFIG_PLUGINS is enabled then lets enable testing for all our TCG
targets. This is a simple smoke test that ensure we don't crash or
otherwise barf out by running each plugin against each test.

There is a minor knock on effect for additional runners which need
specialised QEMU_OPTS which will also need to declare a plugin version
of the runner. If this gets onerous we might need to add another
helper.

Checking the results of the plugins is left for a later exercise.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
 2019-10-28 15:12:38 +00:00
Alex Bennée 83704ceff1 tests/tcg: add linux-user semihosting smoke test for ARM 
We already use semihosting for the system stuff so this is a simple
smoke test to ensure we are working OK on linux-user.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190913151845.12582-7-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
 2019-09-27 11:41:32 +01:00
Alex Bennée 72ab7f9e1d tests/tcg: clean-up some comments after the de-tangling 
These were missed in the recent de-tangling so have been updated to be
more actuate. I've also built up ARM_TESTS in a manner similar to
AARCH64_TESTS for better consistency.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190913151845.12582-2-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
 2019-09-27 11:41:28 +01:00
Paolo Bonzini fc76c56d3f tests/tcg: cleanup Makefile inclusions 
Rename Makefile.probe to Makefile.prereqs and make it actually
define rules for the tests.

Rename Makefile to Makefile.target, since it is not a toplevel
makefile.

Rename Makefile.include to Makefile.qemu and disentangle it
from the QEMU Makefile.target, so that it is invoked recursively
by tests/Makefile.include.  Tests are now placed in
tests/tcg/$(TARGET).

Drop the usage of TARGET_BASE_ARCH, which is ignored by everything except
x86_64 and aarch64.  Fix x86 tests by using -cpu max and, while
at it, standardize on QEMU_OPTS for aarch64 tests too.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190807143523.15917-3-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
 2019-09-10 09:38:33 +01:00
Richard Henderson d67ebada15 target/arm: Fix output of PAuth Auth 
The ARM pseudocode installs the error_code into the original
pointer, not the encrypted pointer.  The difference applies
within the 7 bits of pac data; the result should be the sign
extension of bit 55.

Add a testcase to that effect.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
 2019-06-13 15:14:03 +01:00
Richard Henderson 06bf3b153a tests/tcg/aarch64: Add pauth smoke test 
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190201195404.30486-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
 2019-02-05 16:52:39 +00:00
Alex Bennée 607bf9b5a5 tests/tcg: add run, diff, and skip helper macros 
As we aren't using the default runners for all the test cases it is
easy to miss out things like timeouts. To help with this we add some
helpers and use them so we only need to make core changes in one
place.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
 2018-06-20 20:22:34 +01:00
Alex Bennée 8ec8a55e3f tests/tcg/arm: add fcvt test cases for AArch32/64 
This runs through the usual float to float conversions and crucially
also runs with ARM Alternative Half Precision Format.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
 2018-06-20 20:22:34 +01:00