At first I thought I could compile the user-mode test for system mode
however we already have a fairly comprehensive test case for system
mode in "memory" so lets use that.
As tracking every access will quickly build up with "print-access" we
add a new mode to track groups of reads and writes to regions. Because
the test_data is 16k aligned we can be sure all accesses to it are
ones we can count.
First we extend the test to report where the test_data region is. Then
we expand the pdot() function to track the total number of reads and
writes to the region. We have to add some addition pdot() calls to
take into account multiple reads/writes in the test loops.
Finally we add a python script to integrate the data from the plugin
and the output of the test and validate they both agree on the total
counts. As some boot codes clear the bss we also add a flag to add a
regions worth of writes to the expected total.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240916085400.1046925-14-alex.bennee@linaro.org>
The multiarch system tests output serial data which should be
redirected to the "output" chardev rather than echoed to the console.
Comment the use of EXTFLAGS variable while we are at it.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240916085400.1046925-13-alex.bennee@linaro.org>
While the compilers will generally happily synthesise a 64 bit value
for you on 32 bit systems it doesn't exercise anything on QEMU. It
also makes it hard to accurately compare the accesses to test_data
when instrumenting.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240916085400.1046925-12-alex.bennee@linaro.org>
This is useful information when debugging memory issues so lets
improve by:
- include the ptr address for u8 fills (like the others)
- indicate the number of operations for reads and writes
- explicitly note when we are flushing
- move the fill printf to after the reset
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240916085400.1046925-11-alex.bennee@linaro.org>
Add an explicit test to check expected memory values are read/written.
8,16,32 load/store are tested for all arch.
64,128 load/store are tested for aarch64/x64.
atomic operations (8,16,32,64) are tested for x64 only.
By default, atomic accesses are non atomic if a single cpu is running,
so we force creation of a second one by creating a new thread first.
load/store helpers code path can't be triggered easily in user mode (no
softmmu), so we can't test it here.
Output of test-plugin-mem-access.c is the list of expected patterns in
plugin output. By reading stdout, we can compare to plugins output and
have a multiarch test.
Can be run with:
make -C build/tests/tcg/$ARCH-linux-user run-plugin-test-plugin-mem-access-with-libmem.so
Tested-by: Xingtao Yao <yaoxt.fnst@fujitsu.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240910172033.1427812-7-pierrick.bouvier@linaro.org>
Message-Id: <20240916085400.1046925-10-alex.bennee@linaro.org>
By using "print-accesses=true" option, mem plugin will now print every
value accessed, with associated size, type (store vs load), symbol,
instruction address and phys/virt address accessed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Xingtao Yao <yaoxt.fnst@fujitsu.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240724194708.1843704-6-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240916085400.1046925-9-alex.bennee@linaro.org>
A specific plugin test can now read and check a plugin output, to ensure
it contains expected values.
Tested-by: Xingtao Yao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240724194708.1843704-5-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240916085400.1046925-8-alex.bennee@linaro.org>
Only multiarch tests are run with plugins, and we want to be able to run
per-arch test with plugins too.
Tested-by: Xingtao Yao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240724194708.1843704-4-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240916085400.1046925-7-alex.bennee@linaro.org>
- Fabiano's patch to move two tests to slow tests.
- Peter's patch to fix qatzip builds
- Stefan's multifd-zstd fix on unsigned diff comparisons
- Fea's bug fix to consistently use memattrs when map() address space
- Fabiano's bug fix on multifd race condition against receivedmap
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZuscdRIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1wblcQD/amw/nw5LiL8/+QzJtjFTckouyHtCn++I
x5yVJndm4M4BAOD+b6Pd5byAX1bH7eZ85368ivKLGIZep6qEvICQmw0G
=wxVI
-----END PGP SIGNATURE-----
Merge tag 'migration-20240917-pull-request' of https://gitlab.com/peterx/qemu into staging
Migration pull request for 9.2
- Fabiano's patch to move two tests to slow tests.
- Peter's patch to fix qatzip builds
- Stefan's multifd-zstd fix on unsigned diff comparisons
- Fea's bug fix to consistently use memattrs when map() address space
- Fabiano's bug fix on multifd race condition against receivedmap
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZuscdRIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wblcQD/amw/nw5LiL8/+QzJtjFTckouyHtCn++I
# x5yVJndm4M4BAOD+b6Pd5byAX1bH7eZ85368ivKLGIZep6qEvICQmw0G
# =wxVI
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 18 Sep 2024 19:31:17 BST
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal]
# gpg: aka "Peter Xu <peterx@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-20240917-pull-request' of https://gitlab.com/peterx/qemu:
migration/multifd: Fix rb->receivedmap cleanup race
migration/savevm: Remove extra load cleanup calls
softmmu/physmem.c: Keep transaction attribute in address_space_map()
migration/multifd: Fix loop conditions in multifd_zstd_send_prepare and multifd_zstd_recv
migration/multifd: Fix build for qatzip
tests/qtest/migration: Move a couple of slow tests under g_test_slow
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
At the moment we run all fp-test tests except for the muladd ones
with the default meson test timeout of 30s. This is plenty for
most of the test cases, but for multiplication and division we
can sometimes hit the timeout if the CI runner is going slow.
Add support to meson.build for a way to override the timeout on
a per test basis, and use it to set the timeout to 60s for
fp-test-rem, fp-test-div and fp-test-mul. We can use this new
generic mechanism also to set the timeout for mulAdd rather
than hardcoding it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240917141641.2836265-1-peter.maydell@linaro.org
The xbzrel and vcpu_dirty_limit are the two slowest tests from
migration-test. Move them under g_test_slow() to save about 40s per
run.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240911145204.17692-1-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
* Replace assert(0) and assert(false) in qtests and s390x code
* Enable the device aliases for or1k
* Some other small test improvements
-----BEGIN PGP SIGNATURE-----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=DXEK
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-09-17' of https://gitlab.com/thuth/qemu into staging
* Make all qtest targets work with "--without-default-devices"
* Replace assert(0) and assert(false) in qtests and s390x code
* Enable the device aliases for or1k
* Some other small test improvements
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmbpWwwRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbUj2A//VQwwbbuQa4FO/fu8mX0/iL43IZPLkVvC
# XPesidMwEsaNlfnUGLwjr9/F9sU7NXSkEdBWshU69ER9D4FPvRlZ6xOc0GB2HHEm
# 2zYBaQoMvB/g5/FMkp5/YqPc/FvYMxePTX0syJCUkdf9hbM3YJagUgSKaz/2ZJRu
# +wztsRMSGx9WBeabTWgbAtGlfEqtfSGdfFHbNtoEVmO/K3rvcAHJhPXZpSmdq4CV
# ymwYQ3Ul1Sdz/34TzshhkY9VvYU6n1zuB+kGrjPcQrOdBV/ukJuBiFkHfSZm/2ch
# zTqbdXvkds867vHMo9s3JeVKPa8ZytKn4ycXXgVS5AZtrnEnyHztlVHWbwbHSafF
# rVGXnE3FabzKL4sEKGzOjMegnwdWtpBNwMVKUZIgURqDXAVVR2m+lf2pW/Niz2WR
# m0LNIcg0NPvxPwuq1xLVHc3CLNSCszu4Ao5YRhKimf3hb+FvzHty3dxn+DDg4+Q4
# hHqQRcbWILhYJEwcAVkfaMTtCh/RESiNi0U7Teqvr+aqBsJP8kdCkE5rY7cqzrqn
# aDaompDZ8QG1QA1c3NaxtmNsvTvpm8gBySrqbMizo8UHQd85HDdXFkAZfI4HWKDi
# jhZAEyh1HLeXrgDT/D0WBWQdPLjDZewTvqgqT/A5XbdR1u4XYXcxwMCpIN1iKFoY
# 8qu0hIcsILM=
# =DXEK
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 17 Sep 2024 11:33:48 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-09-17' of https://gitlab.com/thuth/qemu:
.gitlab-ci.d/crossbuilds.yml: Force 'make check' to -j2 for cross-i686-tci
tests/functional: Move the mips64el fuloong2e test into the thorough category
docs/fuzz: fix outdated mention to enable-sanitizers
system: Enable the device aliases for or1k, too
system: Sort QEMU_ARCH_VIRTIO_PCI definition
tests/qtest: remove break after g_assert_not_reached()
tests/qtest: replace assert(false) with g_assert_not_reached()
include/hw/s390x: replace assert(false) with g_assert_not_reached()
tests/unit: replace assert(0) with g_assert_not_reached()
tests/qtest: replace assert(0) with g_assert_not_reached()
gitlab: fix logic for changing docker tag on stable branches
.gitlab-ci.d/buildtest: Build most targets in the build-without-defaults job
tests/qtest: Disable numa-test if the default machine is not available
tests/qtest/meson.build: Add more CONFIG switches checks for the x86 tests
tests/qtest/hd-geo-test: Check for availability of "pc" machine before using it
tests/qtest/boot-order-test: Make the machine name mandatory in this test
tests/qtest/cdrom-test: Improve the machine detection in the cdrom test
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit d2fce37597 added a test that downloads an asset from the
internet, so this test should not be run by default anymore and be
put into the thorough category instead.
Message-ID: <20240913175140.3329083-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240912073921.453203-36-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240912073921.453203-24-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240912073921.453203-14-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240912073921.453203-13-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The numa-test needs a default machine in the target binary to work
successfully, so don't try to run this test if the corresponding
machine has not been enabled, e.g. when QEMU has been configured with
"--without-default-devices".
Message-ID: <20240905191434.694440-7-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When configuring QEMU with "--without-default-devices", currently a lot
of the x86 qtests are failing since they silently assume that a certain
device or the i440fx pc machine is available. Add more checks for CONFIG
switches here to not run those tests in case the corresponding device is
not available.
Message-ID: <20240905191434.694440-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In case QEMU has been configured with "--without-default-devices", the
"pc" machine type might be missing in the binary. We should check for
its availability before using it.
Message-ID: <20240905191434.694440-5-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's make sure that we always pass a machine name to the test_boot_orders()
function, so we can check whether the machine is available in the binary
and skip the test in case it is not included in the build.
Message-ID: <20240905191434.694440-4-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When configuring QEMU with the --without-default-devices switch, these
tests are currently failing since they assume that the "pc" and "q35"
machines are always available. Add some proper checks to make the test
work without these machines, too.
Message-ID: <20240905191434.694440-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Per datasheet, "HIGH AND LOW LIMIT REGISTERS", the lower 4 bit
of the limit registers are unused and always report 0.
The lower 4 bit should not be used for temperature comparisons,
so mask the unused bits before storing the limits.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20240906154911.86803-6-philmd@linaro.org>
[PMD: Update tests/qtest/ files]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add comments describing how the FIFO evolves during each test.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20240906132909.78886-4-philmd@linaro.org>
Test fifo8_peek_buf() can fill a buffer with wrapped data.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20240906132909.78886-3-philmd@linaro.org>
Replace reused bytes { 0x1, 0x2, 0x3, 0x4 } by { 0x9, 0xa, 0xb, 0xc }
to be sure a different value is overwritten.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20240906132909.78886-2-philmd@linaro.org>
This tests the Fifo8 implementation basic operations as well as
testing the *_bufptr() in-place buffer functions and the newer
*_buf() functions that also handle wraparound of the internal
FIFO buffer.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Octavian Purdila <tavip@google.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240828122258.928947-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The CRIS target is deprecated since v9.0 (commit c7bbef4023
"docs: mark CRIS support as deprecated").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-14-philmd@linaro.org>
We removed the cross compiled CRIS tests in the previous commit.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-4-philmd@linaro.org>
We are going to remove the CRIS target.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-3-philmd@linaro.org>
We never compiled / ran these tests.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-2-philmd@linaro.org>
i286 acpi speedup by precomputing _PRT by Ricardo Ribalda
vhost_net speedup by using MR transactions by Zuo Boqun
ich9 gained support for periodic and swsmi timer by Dominic Prinz
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmbhoCUPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRptpUH/iR5AmJFpvAItqlPOvJiYDEch46C73tyrSws
Kk/1EbGSL7mFFD5sfdSSV4Rw8CQBsmM/Dt5VDkJKsWnOLjkBQ2CYH0MYHktnrKcJ
LlSk32HnY5p1DsXnJhgm5M7St8T3mV/oFdJCJAFgCmpx5uT8IRLrKETN8+30OaiY
xo35xAKOAS296+xsWeVubKkMq7H4y2tdZLE/22gb8rlA8d96BJIeVLQ3y3IjeUPR
24q6c7zpObzGhYNZ/PzAKOn+YcVsV/lLAzKRZJTzTUPyG24BcjJTyyr/zNSYAgfk
lLXzIZID3GThBmrCAiDZ1z6sfo3MRg2wNS/FBXtK6fPIuFxed+8=
=ySRy
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, fixes, cleanups
i286 acpi speedup by precomputing _PRT by Ricardo Ribalda
vhost_net speedup by using MR transactions by Zuo Boqun
ich9 gained support for periodic and swsmi timer by Dominic Prinz
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmbhoCUPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRptpUH/iR5AmJFpvAItqlPOvJiYDEch46C73tyrSws
# Kk/1EbGSL7mFFD5sfdSSV4Rw8CQBsmM/Dt5VDkJKsWnOLjkBQ2CYH0MYHktnrKcJ
# LlSk32HnY5p1DsXnJhgm5M7St8T3mV/oFdJCJAFgCmpx5uT8IRLrKETN8+30OaiY
# xo35xAKOAS296+xsWeVubKkMq7H4y2tdZLE/22gb8rlA8d96BJIeVLQ3y3IjeUPR
# 24q6c7zpObzGhYNZ/PzAKOn+YcVsV/lLAzKRZJTzTUPyG24BcjJTyyr/zNSYAgfk
# lLXzIZID3GThBmrCAiDZ1z6sfo3MRg2wNS/FBXtK6fPIuFxed+8=
# =ySRy
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 11 Sep 2024 14:50:29 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
hw/acpi/ich9: Add periodic and swsmi timer
virtio-mem: don't warn about THP sizes on a kernel without THP support
hw/audio/virtio-sound: fix heap buffer overflow
hw/cxl: fix physical address field in get scan media results output
virtio-pci: Add lookup subregion of VirtIOPCIRegion MR
vhost_net: configure all host notifiers in a single MR transaction
tests/acpi: pc: update golden masters for DSDT
hw/i386/acpi-build: Return a pre-computed _PRT table
tests/acpi: pc: allow DSDT acpi table changes
intel_iommu: Make PASID-cache and PIOTLB type invalid in legacy mode
intel_iommu: Fix invalidation descriptor type field
virtio: rename virtio_split_packed_update_used_idx
hw/pci/pci-hmp-cmds: Avoid displaying bogus size in 'info pci'
pci: don't skip function 0 occupancy verification for devfn auto assign
hw/isa/vt82c686.c: Embed i8259 irq in device state instead of allocating
hw: Move declaration of IRQState to header and add init function
virtio: Always reset vhost devices
virtio: Allow .get_vhost() without vhost_started
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Message-Id: <20240814115736.1580337-4-ribalda@chromium.org>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Message-Id: <20240814115736.1580337-2-ribalda@chromium.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- remove docker-armel-cross
- update i686 and mipsel images to bookworm
- use docker-all-test-cross for mips64le tests
- fix duplicated line in docs
- update gitlab-runner ansible script
- support MTE in gdbstub for system mode
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmbgye8ACgkQ+9DbCVqe
KkTesQf/WSTYAelzJWlEo0EPg5agokephfza4vdmweDujOT8MYPF9qxfsxoiTVA8
GTtTOod9iqmY/4/EPKIqUtZH38oaX5h9on2FhSssOMy+N4lUADJ+CcHHMSj4BuUt
jTXDSa9e5aj0m/yqg2PjF8U12Sygf7dKJturGLOWoWR5qa3xpQ2a6c3CkfxO3RQK
yTBfIZk47iOrVvEX8chsRzpkpiXY6/S5hkZZwcqbXcUMKH2s0po9Yg031vE3yN+g
kxJ7/mFNl49E/fqYdRahhyBDORlltCglCHsacxxa/4a216wOsNKyV3QLCJMjq8yO
3/SPu0p+UouSFcASwTUt5XIo0G0TcA==
=7W1s
-----END PGP SIGNATURE-----
Merge tag 'pull-testing-gdbstub-oct-100924-1' of https://gitlab.com/stsquad/qemu into staging
testing and gdbstub updates:
- remove docker-armel-cross
- update i686 and mipsel images to bookworm
- use docker-all-test-cross for mips64le tests
- fix duplicated line in docs
- update gitlab-runner ansible script
- support MTE in gdbstub for system mode
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmbgye8ACgkQ+9DbCVqe
# KkTesQf/WSTYAelzJWlEo0EPg5agokephfza4vdmweDujOT8MYPF9qxfsxoiTVA8
# GTtTOod9iqmY/4/EPKIqUtZH38oaX5h9on2FhSssOMy+N4lUADJ+CcHHMSj4BuUt
# jTXDSa9e5aj0m/yqg2PjF8U12Sygf7dKJturGLOWoWR5qa3xpQ2a6c3CkfxO3RQK
# yTBfIZk47iOrVvEX8chsRzpkpiXY6/S5hkZZwcqbXcUMKH2s0po9Yg031vE3yN+g
# kxJ7/mFNl49E/fqYdRahhyBDORlltCglCHsacxxa/4a216wOsNKyV3QLCJMjq8yO
# 3/SPu0p+UouSFcASwTUt5XIo0G0TcA==
# =7W1s
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 10 Sep 2024 23:36:31 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-testing-gdbstub-oct-100924-1' of https://gitlab.com/stsquad/qemu:
tests/tcg/aarch64: Extend MTE gdbstub tests to system mode
tests/tcg/aarch64: Improve linker script organization
tests/guest-debug: Support passing arguments to the GDB test script
gdbstub: Add support for MTE in system mode
gdbstub: Use specific MMU index when probing MTE addresses
scripts/ci: update the gitlab-runner playbook
docs/devel: fix duplicate line
tests/docker: use debian-all-test-cross for mips64el tests
tests/docker: update debian i686 and mipsel images to bookworm
tests/docker: remove debian-armel-cross
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current FreeBSD CI jobs are failing installation since the
"opencv" package is now missing there. Updating to 14.1 fixes
the issue.
Message-Id: <20240911090149.286257-1-thuth@redhat.com>
Reviewed-by: Li-Wen Hsu <lwhsu@FreeBSD.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some systems (like OpenBSD) do not have the sha256sum or sha512sum programs
installed by default, or use different names for those. Use the Python
hashlib instead so we don't have to rely on the external programs.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240910201742.239559-1-thuth@redhat.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
has_cmd returns a tuple, not a boolean value. This fixes a crash when
e.g. "tesseract" is not available in the test_m68k_nextcube test.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240910075820.51346-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This test handles both, aarch64 and x86_64, with the same test code
(apart from some initial setup), so don't split this file by target
but add a check for self.arch in the main test function.
Message-ID: <20240903051333.102494-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We've got to do_test_advcal_2018() here now that the test resides
in a separate file. Also switch back to the original URL (since
the site did not vanish as originally expected) and update the
hashsum to use SHA256.
Message-ID: <20240906180549.792832-15-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We've got to do_test_advcal_2018() here now that the test resides
in a separate file. Also switch back to the original URL (since
the site did not vanish as originally expected) and update the
hashsum to use SHA256.
Message-ID: <20240906180549.792832-14-thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Straight forward conversion, just switch to SHA256 hashsum now.
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240906180549.792832-13-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Straight forward conversion. Update the SHA1 hashes to SHA256
hashes since SHA1 should not be used anymore nowadays.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240826221058.75126-5-philmd@linaro.org>
[thuth: Use LinuxKernelTest class]
Message-ID: <20240906180549.792832-12-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Straight forward conversion. Update the SHA1 hashes to SHA256
hashes since SHA1 should not be used anymore nowadays.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240826221058.75126-4-philmd@linaro.org>
[thuth: Use the LinuxKernelTest class]
Message-ID: <20240906180549.792832-11-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Alex Bennée