Drop the frankly misleading quickstart section for a more rounded
introduction section. This new section gives an overview of the
accelerators as well as a high level introduction to some of the key
features of the emulator. We also expand on a general form for a QEMU
command line with a hopefully not too scary worked example of what
this looks like.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Message-Id: <20230124180127.1881110-23-alex.bennee@linaro.org>
The main reason to do this is to document our O_BINARY implementation
decision somewhere. However I've also moved some of the implementation
details out of qemu-options and added links between the two. As a
bonus I've highlighted the scary warnings about host access with the
appropriate RST tags.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-22-alex.bennee@linaro.org>
This affects both system and user mode emulation so we should probably
list it up front.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-21-alex.bennee@linaro.org>
Make it easier to navigate the documentation.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230124180127.1881110-20-alex.bennee@linaro.org>
tests/tcg/nios2/Makefile.target has accidentally been added
to the Microblaze section. Move it into the correct nios2
section instead - and while we're at it, it should also cover
the whole folder, and not only the Makefile.
Fixes: 67f80eb4d0 ("tests/tcg: enable debian-nios2-cross for test building")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230119130326.2030297-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-19-alex.bennee@linaro.org>
Instead of spewing the whole log to stdout lets just define them as
build artefacts so we can examine them later. Where we are running
check-tcg run it first as those tests are yet to be integrated into
meson. To avoid confusion we don't run multiple check-tcg tests at
once.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-18-alex.bennee@linaro.org>
linux-user blocks all signals while attempting to handle guest
signals (e.g. ABRT), which means that the default TERM sent by timeout
has no effect -- KILL instead.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230117035701.168514-2-richard.henderson@linaro.org>
[AJB: expanded commit message from cover letter]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230124180127.1881110-17-alex.bennee@linaro.org>
We are getting a lot of failures that are not related to changes so
this could be a flaky test.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-16-alex.bennee@linaro.org>
This image is perfectly capable of building QEMU, and indeed we do
that on gitlab. Drop the DOCKER_PARTIAL_IMAGES setting so we can also
test the gitlab build locally.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-15-alex.bennee@linaro.org>
When flex is not available, binutils sources default to the
'missing' script, but the current script available is not in
the format expected by the 'configure' script:
$ ./configure
...
/usr/src/binutils/missing: Unknown `--run' option
Try `/usr/src/binutils/missing --help' for more information
configure: WARNING: `missing' script is too old or missing
...
checking for bison... bison -y
checking for flex... no
checking for lex... no
checking for flex... /usr/src/binutils/missing flex
$ make
...
updating ldgram.h
gcc -DHAVE_CONFIG_H -I. -I. -I. -D_GNU_SOURCE -I. -I. -I../bfd -I./../bfd -I./../include -I./../intl -I../intl -w -DLOCALEDIR="\"/usr/local/share/locale\"" -W -Wall -Wstrict-prototypes -Wmissing-prototypes -w -c `test -f 'ldgram.c' || echo './'`ldgram.c
`test -f ldlex.l || echo './'`ldlex.l
/bin/sh: 1: ldlex.l: not found
make[3]: *** [Makefile:662: ldlex.c] Error 127
make[3]: Leaving directory '/usr/src/binutils/ld'
make[2]: *** [Makefile:799: all-recursive] Error 1
By pass the 'missing' script use by directly installing 'flex'
in the container.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230112155643.7408-1-philmd@linaro.org>
Reviewed-by: Bastian-Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-14-alex.bennee@linaro.org>
Fedora 35 is EOL.
Update to upstream lcitool, that dropped f35 and added f37.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230110132700.833690-7-marcandre.lureau@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-11-alex.bennee@linaro.org>
The up-coming upgrade to Fedora 37 will bring in libtcmalloc as a
dependency of libglusterfs which confuses our fuzz run. Rather than
disable the build lets use LSAN's suppression mechanism to prevent the
job from failing.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230124180127.1881110-10-alex.bennee@linaro.org>
It looks like this is no longer wanted, we only build the html output.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230110132700.833690-6-marcandre.lureau@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-9-alex.bennee@linaro.org>
On msys2, the shader-to-C script produces bad C:
./ui/shader/texture-blit-vert.h:2:5: error: missing terminating " character [-Werror]
Fix it by changing the line ending from crlf to lf, and convert the
script to Python (qemu build seems perl-free after that).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230110132700.833690-2-marcandre.lureau@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-6-alex.bennee@linaro.org>
We don't need to play timing games to ensure one socat wins over the
other, just create the fifo they both can use before spawning the
processes. However in the process we need to disable two tests for
Windows platforms as we don't have an abstraction for mkfifo().
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1403
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230124180127.1881110-5-alex.bennee@linaro.org>
I think this was because older Ubuntu's didn't alias clang to whatever
the latest version was. They do now so lets use that and not break.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-4-alex.bennee@linaro.org>
Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230124180127.1881110-3-alex.bennee@linaro.org>
We were using quite and old runner on our machines and running into
issues with stalling jobs. Gitlab in the meantime now reliably provide
the latest packaged versions of the runner under a stable URL. This
update:
- creates a per-arch subdir for builds
- switches from binary tarballs to deb packages
- re-uses the same binary for the secondary runner
- updates distro check for second to 22.04
Note this script isn't fully idempotent as we end up accumulating
runners especially during testing. However we also want to be able to
run twice with different GitLab keys (e.g. project and personal) so I
think we just have to be mindful of that during testing.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230124180127.1881110-2-alex.bennee@linaro.org>
Let's safe some CI minutes by merging these two jobs. We can now
also drop "--disable-capstone" since the capstone submodule has
been removed a while ago. We should rather test --disable-fdt now
to check a compilation without the "dtc" submodule (for this we
have to drop i386-softmmu from the target list unfortunately).
Additionally, the qtests with s390x and sh4 are not read for
"--without-default-devices" yet, so we can only test mips64 and
avr here now.
Message-Id: <20230130104446.1286773-5-thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
display-vga-test currently tries to guess the usable VGA devices
according to the target architecture that is used for the test.
This of course does not work if QEMU has been built with the
"--without-default-devices" configure switch. To fix this, use the
qtest_has_device() function for the decision instead. This way
we can also consolidate most of the test functions into one single
function (that takes a parameter with the device name now), except
for the multihead test that tries to instantiate two devices and
thus is a little bit different.
Message-Id: <20230130104446.1286773-4-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We are also compile-testing ppc64-softmmu with clang in the "tsan-build"
job, and ppc64-softmmu covers pretty much the same code as ppc-softmmu,
so we should not lose much test coverage here by removing ppc-softmmu
from the "clang-system" job.
Message-Id: <20230130104446.1286773-2-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently the -audiodev accepts any audiodev type regardless of what is
built in to QEMU. An error only occurs later at runtime when a sound
device tries to use the audio backend.
With this change QEMU will immediately reject -audiodev args that are
not compiled into the binary. The QMP schema will also be introspectable
to identify what is compiled in.
This also helps to avoid compiling code that is not required in the
binary. Note: When building the audiodevs as modules, the patch only
compiles out code for modules that we don't build at all.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[thuth: Rebase, take sndio and dbus devices into account]
Message-Id: <20230123083957.20349-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Way back in QEMU 4.0, the -audiodev command line option was introduced
for configuring audio backends. This CLI option does not use QemuOpts
so it is not visible for introspection in 'query-command-line-options',
instead using the QAPI Audiodev type. Unfortunately there is also no
QMP command that uses the Audiodev type, so it is not introspectable
with 'query-qmp-schema' either.
This introduces a 'query-audiodev' command that simply reflects back
the list of configured -audiodev command line options. This alone is
maybe not very useful by itself, but it makes Audiodev introspectable
via 'query-qmp-schema', so that libvirt (and other upper layer tools)
can discover the available audiodevs.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[thuth: Update for upcoming QEMU v8.0, and use QAPI_LIST_PREPEND]
Message-Id: <20230123083957.20349-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add some documentation about the zpci device and how
to use it with pci devices on s390x.
Used source: Cornelia Huck's blog post
https://people.redhat.com/~cohuck/2018/02/19/notes-on-pci-on-s390x.html
Signed-off-by: Sebastian Mitterle <smitterl@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20230127123349.55294-1-smitterl@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Do not mention ioh3420 in the "how to" doc.
The device still works and can be used by already
existing setups, but no need to be mentioned.
Suggested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230123174205.683979-1-berrange@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit a7f523c7d1.
The nested event loop is broken by design. It's only user was removed.
Drop the code as well so that nobody ever tries to use it again.
I had to fix a couple of trivial conflicts around return values because
of 025faa872b ("vhost-user: stick to -errno error return convention").
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20230119172424.478268-3-groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This reverts commit db8a3772e3.
Motivation : this is breaking vhost-user with DPDK as reported in [0].
Received unexpected msg type. Expected 22 received 40
Fail to update device iotlb
Received unexpected msg type. Expected 40 received 22
Received unexpected msg type. Expected 22 received 11
Fail to update device iotlb
Received unexpected msg type. Expected 11 received 22
vhost VQ 1 ring restore failed: -71: Protocol error (71)
Received unexpected msg type. Expected 22 received 11
Fail to update device iotlb
Received unexpected msg type. Expected 11 received 22
vhost VQ 0 ring restore failed: -71: Protocol error (71)
unable to start vhost net: 71: falling back on userspace virtio
The failing sequence that leads to the first error is :
- QEMU sends a VHOST_USER_GET_STATUS (40) request to DPDK on the master
socket
- QEMU starts a nested event loop in order to wait for the
VHOST_USER_GET_STATUS response and to be able to process messages from
the slave channel
- DPDK sends a couple of legitimate IOTLB miss messages on the slave
channel
- QEMU processes each IOTLB request and sends VHOST_USER_IOTLB_MSG (22)
updates on the master socket
- QEMU assumes to receive a response for the latest VHOST_USER_IOTLB_MSG
but it gets the response for the VHOST_USER_GET_STATUS instead
The subsequent errors have the same root cause : the nested event loop
breaks the order by design. It lures QEMU to expect responses to the
latest message sent on the master socket to arrive first.
Since this was only needed for DAX enablement which is still not merged
upstream, just drop the code for now. A working solution will have to
be merged later on. Likely protect the master socket with a mutex
and service the slave channel with a separate thread, as discussed with
Maxime in the mail thread below.
[0] https://lore.kernel.org/qemu-devel/43145ede-89dc-280e-b953-6a2b436de395@redhat.com/
Reported-by: Yanghang Liu <yanghliu@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2155173
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20230119172424.478268-2-groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
We are facing the issues that our test logs in the gitlab CI are
too big (and thus cut off). The bios-tables-test is one of the few
qtests that prints many lines of output by default when running with
V=1, so it contributes to this problem. Almost all other qtests are
silent with V=1 and only print debug messages with V=2 and higher.
Thus let's change the bios-tables-test to behave more like the
other tests and only print the debug messages with V=2 (or higher).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230118125132.1694469-1-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Use the proper QOM type definition instead of magic string.
This also helps during eventual refactor while using git-grep.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230117193014.83502-1-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
The VHOST_USER_ADD/REM_MEM_REG requests should be categorized into
non-vring specific messages, and should be sent only once.
Signed-off-by: Minghao Yuan <yuanmh12@chinatelecom.cn>
Message-Id: <20230123122119.194347-1-yuanmh12@chinatelecom.cn>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Generating slots descriptions populated by non-hotpluggable devices
is akward at best and complicates hotplug path (build_append_pcihp_slots)
needlessly, and builds only dynamic _DSM for such slots which is overlkill.
Clean it up and let non-hotplug path (build_append_pci_bus_devices)
to handle that task.
Such clean up effectively drops dynamic _DSM methods on non-hotpluggable
slots (even though bus itself is hotpluggable), but in practice it
affects only built-in devices (ide controllers/various bridges) that don't
use acpi-index anyways so effectively it doesn't matter (NICs are hotpluggble).
Follow up series will add static _DSM for non-hotpluggble devices/buses
that will not depend on ACPI PCI hotplug at all, and potentially would
allows us to reuse non-hotplug path elsewhere (PBX/microvm/arm-virt),
including new support for acpi-index for non-hotpluggable devices.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-40-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-39-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
coldplugged bridges are not unpluggable, so there is no need
to describe slots where they are plugged as hotpluggable. To
that effect we have a condition that marks slot as non-hotpluggable
if it's populated by coldplugged bridge and prevents generation
_SUN/_EJ0 objects for it. That leaves dynamic _DSM method on
such slot (which also depends on BSEL and pcihp hardware).
This _DSM method provides only dynamic acpi-index support so far,
which is not actually used/supported by linux kernel for bridges
and it's doubtful there will be need for it at all.
So it's rather pointless to generate acpi-index related AML
for bridges and we can simplify hotplug slots generator a bit
more by completely ignoring coldplugged bridges on hotplug path.
Another point in favor of dropping dynamic _DSM support, is
that we can replace it with static _DSM if necessary since
a slot with bridge can't change during VM runtime and without
any dependency on ACPI PCI hotplug at that.
Later I plan to implement bridge specific static _DSM
PCI Firmware Specification 3.2
4.6.5. _DSM for Ignoring PCI Boot Configurations
part of spec, to fix longstanding issue with fixed IO/MEM
resource assignment that often leads to hotplugged device
being in-operational within the guest due limited IO/MEM
windows programmed on bridge at boot time.
Expected change when coldplugged bridge is ignored by hotplug
code, should look like:
- Scope (S18)
- {
- Name (ASUN, 0x03)
- Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method
- {
- Local0 = Package (0x02)
- {
- BSEL,
- ASUN
- }
- Return (PDSM (Arg0, Arg1, Arg2, Arg3, Local0))
- }
- }
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-37-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-36-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Split build_append_pci_bus_devices() onto generic part that builds
AML descriptions only for populated slots which is applicable to
both hotplug disabled and enabled bridges. And a hotplug only
part that complements generic AML with hotplug depended bits
(that depend on BSEL), like _SUN/_EJ0 entries, dynamic _DSM.
Hotplug part, will generate full 'Device' descriptors for
non-populated slots (like it used to be) and complementary
'Scope' descriptors for populated slots that are hotplug capable.
i.e. something like this:
- ...
+ Name (BSEL, 0x03)
+ Scope (S00)
+ {
+ Name (ASUN, Zero)
+ Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method
+ {
+ Local0 = Package (0x02)
+ {
+ BSEL,
+ ASUN
+ }
+ Return (PDSM (Arg0, Arg1, Arg2, Arg3, Local0))
+ }
+ [ ... other hotplug depended bits ]
+ }
While generic build_append_pci_bus_devices() still calls hotplug part at
its end it doesn't really depend on any hotplug bits anymore and later
both could be completely separated when it's necessary.
Main benefit though is that both build_append_pci_bus_devices() and
build_append_pcihp_slots() become more readable and it makes easier
to modify them with less risk of affecting another part. Also it opens
possibility to re-use generic part elsewhere (microvm, arm/virt).
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-34-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-33-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-32-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
function doesn't need RW aceess to passed in bus pointer,
make it const.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-31-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
simplify build_append_pci_bus_devices() a bit by handling bridge
specific logic in bridge dedicated AcpiDevAmlIfClass::build_dev_aml
callback.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-30-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
... so that the concrete impl. won't has to duplicate it
every time. By default it doesn't do anything unless leaf class
defines and sets AcpiDevAmlIfClass::build_dev_aml handler.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-29-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Before switching pci bridges to AcpiDevAmlIf interface, ensure that
ignored slots are handled correctly.
(existing rule works but only if bridge doesn't have AcpiDevAmlIf interface).
While at it rewrite related comments to be less confusing (hopefully).
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-28-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Alex Bennée