The mapped-ram migration can be performed live or non-live, but it is
always asynchronous, i.e. the source machine and the destination
machine are not migrating at the same time. We only need some pieces
of the multifd sync operations.
multifd_send_sync_main()
------------------------
Issued by the ram migration code on the migration thread, causes the
multifd send channels to synchronize with the migration thread and
makes the sending side emit a packet with the MULTIFD_FLUSH flag.
With mapped-ram we want to maintain the sync on the sending side
because that provides ordering between the rounds of dirty pages when
migrating live.
MULTIFD_FLUSH
-------------
On the receiving side, the presence of the MULTIFD_FLUSH flag on a
packet causes the receiving channels to start synchronizing with the
main thread.
We're not using packets with mapped-ram, so there's no MULTIFD_FLUSH
flag and therefore no channel sync on the receiving side.
multifd_recv_sync_main()
------------------------
Issued by the migration thread when the ram migration flag
RAM_SAVE_FLAG_MULTIFD_FLUSH is received, causes the migration thread
on the receiving side to start synchronizing with the recv
channels. Due to compatibility, this is also issued when
RAM_SAVE_FLAG_EOS is received.
For mapped-ram we only need to synchronize the channels at the end of
migration to avoid doing cleanup before the channels have finished
their IO.
Make sure the multifd syncs are only issued at the appropriate times.
Note that due to pre-existing backward compatibility issues, we have
the multifd_flush_after_each_section property that can cause a sync to
happen at EOS. Since the EOS flag is needed on the stream, allow
mapped-ram to just ignore it.
Also emit an error if any other unexpected flags are found on the
stream.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240229153017.2221-20-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
On the receiving side we don't need to differentiate between main
channel and threads, so whichever channel is defined first gets to be
the main one. And since there are no packets, use the atomic channel
count to index into the params array.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-19-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Allow multifd to open file-backed channels. This will be used when
enabling the mapped-ram migration stream format which expects a
seekable transport.
The QIOChannel read and write methods will use the preadv/pwritev
versions which don't update the file offset at each call so we can
reuse the fd without re-opening for every channel.
Contrary to the socket migration, the file migration doesn't need an
asynchronous channel creation process, so expose
multifd_channel_connect() and call it directly.
Note that this is just setup code and multifd cannot yet make use of
the file channels.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240229153017.2221-18-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
We'll need to access multifd_send_state->channels_created from outside
multifd.c, so introduce a helper for that.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-17-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Currently multifd does not need to have knowledge of pages on the
receiving side because all the information needed is within the
packets that come in the stream.
We're about to add support to mapped-ram migration, which cannot use
packets because it expects the ramblock section in the migration file
to contain only the guest pages data.
Add a data structure to transfer pages between the ram migration code
and the multifd receiving threads.
We don't want to reuse MultiFDPages_t for two reasons:
a) multifd threads don't really need to know about the data they're
receiving.
b) the receiving side has to be stopped to load the pages, which means
we can experiment with larger granularities than page size when
transferring data.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-16-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
For the upcoming support to the new 'mapped-ram' migration stream
format, we cannot use multifd packets because each write into the
ramblock section in the migration file is expected to contain only the
guest pages. They are written at their respective offsets relative to
the ramblock section header.
There is no space for the packet information and the expected gains
from the new approach come partly from being able to write the pages
sequentially without extraneous data in between.
The new format also simply doesn't need the packets and all necessary
information can be taken from the standard migration headers with some
(future) changes to multifd code.
Use the presence of the mapped-ram capability to decide whether to
send packets.
This only moves code under multifd_use_packets(), it has no effect for
now as mapped-ram cannot yet be enabled with multifd.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-15-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Next patches will abstract the type of data being received by the
channels, so do some cleanup now to remove references to pages and
dependency on 'normal_num'.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-14-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Use a more specific name for the compression data so we can use the
generic for the multifd core code.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-13-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Add the necessary code to parse the format changes for the
'mapped-ram' capability.
One of the more notable changes in behavior is that in the
'mapped-ram' case ram pages are restored in one go rather than
constantly looping through the migration stream.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-11-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Implement the outgoing migration side for the 'mapped-ram' capability.
A bitmap is introduced to track which pages have been written in the
migration file. Pages are written at a fixed location for every
ramblock. Zero pages are ignored as they'd be zero in the destination
migration as well.
The migration stream is altered to put the dirty pages for a ramblock
after its header instead of having a sequential stream of pages that
follow the ramblock headers.
Without mapped-ram (current): With mapped-ram (new):
--------------------- --------------------------------
| ramblock 1 header | | ramblock 1 header |
--------------------- --------------------------------
| ramblock 2 header | | ramblock 1 mapped-ram header |
--------------------- --------------------------------
| ... | | padding to next 1MB boundary |
--------------------- | ... |
| ramblock n header | --------------------------------
--------------------- | ramblock 1 pages |
| RAM_SAVE_FLAG_EOS | | ... |
--------------------- --------------------------------
| stream of pages | | ramblock 2 header |
| (iter 1) | --------------------------------
| ... | | ramblock 2 mapped-ram header |
--------------------- --------------------------------
| RAM_SAVE_FLAG_EOS | | padding to next 1MB boundary |
--------------------- | ... |
| stream of pages | --------------------------------
| (iter 2) | | ramblock 2 pages |
| ... | | ... |
--------------------- --------------------------------
| ... | | ... |
--------------------- --------------------------------
| RAM_SAVE_FLAG_EOS |
--------------------------------
| ... |
--------------------------------
where:
- ramblock header: the generic information for a ramblock, such as
idstr, used_len, etc.
- ramblock mapped-ram header: the new information added by this
feature: bitmap of pages written, bitmap size and offset of pages
in the migration file.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-10-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
The mapped-ram migration format needs a channel that supports seeking
to be able to write each page to an arbitrary offset in the migration
stream.
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-9-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Add a new migration capability 'mapped-ram'.
The core of the feature is to ensure that RAM pages are mapped
directly to offsets in the resulting migration file instead of being
streamed at arbitrary points.
The reasons why we'd want such behavior are:
- The resulting file will have a bounded size, since pages which are
dirtied multiple times will always go to a fixed location in the
file, rather than constantly being added to a sequential
stream. This eliminates cases where a VM with, say, 1G of RAM can
result in a migration file that's 10s of GBs, provided that the
workload constantly redirties memory.
- It paves the way to implement O_DIRECT-enabled save/restore of the
migration stream as the pages are ensured to be written at aligned
offsets.
- It allows the usage of multifd so we can write RAM pages to the
migration file in parallel.
For now, enabling the capability has no effect. The next couple of
patches implement the core functionality.
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-8-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Add utility methods that will be needed when implementing 'mapped-ram'
migration capability.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Link: https://lore.kernel.org/r/20240229153017.2221-7-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Make sure the data is flushed to disk before closing file
channels. This is to ensure data is on disk and not lost in the event
of a host crash.
This is currently being implemented to affect the migration code when
migrating to a file, but all QIOChannelFile users should benefit from
the change.
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Acked-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-6-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
The upcoming 'mapped-ram' feature will require qemu to write data to
(and restore from) specific offsets of the migration file.
Add a minimal implementation of pwritev/preadv and expose them via the
io_pwritev and io_preadv interfaces.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-5-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Introduce basic pwritev/preadv support in the generic channel layer.
Specific implementation will follow for the file channel as this is
required in order to support migration streams with fixed location of
each ram page.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-4-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Add a generic QIOChannel feature SEEKABLE which would be used by the
qemu_file* apis. For the time being this will be only implemented for
file channels.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-3-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Some minor cleanups and documentation for multifd_recv_sync_main.
Use thread_count as done in other parts of the code. Remove p->id from
the multifd_recv_state sync, since that is global and not tied to a
channel. Add documentation for the sync steps.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-2-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Some glue code was missing, so that using `qmp_migrate_set_parameters`
to set `multifd-zstd-level` or `multifd-zlib-level` did not work. This
commit adds the glue code to fix that.
Signed-off-by: Bryan Zhang <bryan.zhang@bytedance.com>
Link: https://lore.kernel.org/r/20240301035901.4006936-2-bryan.zhang@bytedance.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Re-wrap the cpr-reboot documentation to 70 columns, use '@' for
cpr-reboot references, capitalize COLO and VFIO, and tweak the
wording.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Link: https://lore.kernel.org/r/1709218462-3640-1-git-send-email-steven.sistare@oracle.com
[peterx: s/qemu/QEMU per Markus's suggestion]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
- Fabiano's fixed-ram patches (1-5 only)
- Peter's cleanups on multifd tls IOC referencing
- Steve's cpr patches for vfio (migration patches only)
- Fabiano's fix on mbps stats racing with COMPLETE state
- Fabiano's fix on return path thread hang
-----BEGIN PGP SIGNATURE-----
iIcEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZd7AbhIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1wbg0gDyA3Vg3pIqCJ+u+hLZ+QKxY/pnu8Y5kF+E
HK2IdslQUQD+OX4ATUnl+CGMiVX9fjs1fKx0Z0Qetq8gC1YJF13yuA0=
=P2QF
-----END PGP SIGNATURE-----
Merge tag 'migration-next-pull-request' of https://gitlab.com/peterx/qemu into staging
Migration pull request
- Fabiano's fixed-ram patches (1-5 only)
- Peter's cleanups on multifd tls IOC referencing
- Steve's cpr patches for vfio (migration patches only)
- Fabiano's fix on mbps stats racing with COMPLETE state
- Fabiano's fix on return path thread hang
# -----BEGIN PGP SIGNATURE-----
#
# iIcEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZd7AbhIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wbg0gDyA3Vg3pIqCJ+u+hLZ+QKxY/pnu8Y5kF+E
# HK2IdslQUQD+OX4ATUnl+CGMiVX9fjs1fKx0Z0Qetq8gC1YJF13yuA0=
# =P2QF
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 28 Feb 2024 05:11:10 GMT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal]
# gpg: aka "Peter Xu <peterx@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-next-pull-request' of https://gitlab.com/peterx/qemu: (25 commits)
migration: Use migrate_has_error() in close_return_path_on_source()
migration: Join the return path thread before releasing to_dst_file
migration: Fix qmp_query_migrate mbps value
migration: options incompatible with cpr
migration: update cpr-reboot description
migration: stop vm for cpr
migration: notifier error checking
migration: refactor migrate_fd_connect failures
migration: per-mode notifiers
migration: MigrationNotifyFunc
migration: remove postcopy_after_devices
migration: MigrationEvent for notifiers
migration: convert to NotifierWithReturn
migration: remove error from notifier data
notify: pass error to notifier with return
migration/multifd: Drop unnecessary helper to destroy IOC
migration/multifd: Cleanup outgoing_args in state destroy
migration/multifd: Make multifd_channel_connect() return void
migration/multifd: Drop registered_yank
migration/multifd: Cleanup TLS iochannel referencing
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- fix some test/tcg license headers to GPLv2+
- bump up check-tcg timeout to 120s
- avoid re-building VM images too often
- update OpenBSD to 7.4
- use GDBFeature to build gdbstub XML
- unify plugin vcpu count under qemu_plugin_num_vcpus
- avoid spurious idle/resume callbacks on new vCPUs
- ensure nios2-linux-user processes async work
- call vcpu_init plugin callback through async work
- define plugin helpers when registers being read
- add plugin API for reading register values
- add support for register tracking to execlog
- update plugin docs with assumptions
- mention plugins can trigger tb_flush in mttcg design doc
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmXfAv0ACgkQ+9DbCVqe
KkQyogf/X6T5lWsdZGb22FOYzaTLf5gfCPXArIVN+GsjSae3dU6qy/qVM1VRJQPw
mH8kvMY7QO5V9M2tL33WtZZg6hqWypXYU+Hit6sMmveKYMKS9ESEX28x3yybgt8Y
fyDywNODX7bs8Wb6NQjVkZvTmM2llrHEtQXPffaXaPyxOAzlGTV9Mf3Sop9rk4nG
8IchzLmOOQ7XnVst/KRyq+29oOYsbyUtj13tNeWBZ5iXFDT6Q/nGwPQ12U2Ztn9N
FZvyzGG707dFaEDxIr4pl7n+lHJto29LMlSXlocANwG6wFNP3nfkSw/dXw3nkZZK
pOfrQKvnnunJKBd7495LYZxTDe505Q==
=/k97
-----END PGP SIGNATURE-----
Merge tag 'pull-maintainer-updates-280224-1' of https://gitlab.com/stsquad/qemu into staging
Testing, gdbstub and plugin updates:
- fix some test/tcg license headers to GPLv2+
- bump up check-tcg timeout to 120s
- avoid re-building VM images too often
- update OpenBSD to 7.4
- use GDBFeature to build gdbstub XML
- unify plugin vcpu count under qemu_plugin_num_vcpus
- avoid spurious idle/resume callbacks on new vCPUs
- ensure nios2-linux-user processes async work
- call vcpu_init plugin callback through async work
- define plugin helpers when registers being read
- add plugin API for reading register values
- add support for register tracking to execlog
- update plugin docs with assumptions
- mention plugins can trigger tb_flush in mttcg design doc
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmXfAv0ACgkQ+9DbCVqe
# KkQyogf/X6T5lWsdZGb22FOYzaTLf5gfCPXArIVN+GsjSae3dU6qy/qVM1VRJQPw
# mH8kvMY7QO5V9M2tL33WtZZg6hqWypXYU+Hit6sMmveKYMKS9ESEX28x3yybgt8Y
# fyDywNODX7bs8Wb6NQjVkZvTmM2llrHEtQXPffaXaPyxOAzlGTV9Mf3Sop9rk4nG
# 8IchzLmOOQ7XnVst/KRyq+29oOYsbyUtj13tNeWBZ5iXFDT6Q/nGwPQ12U2Ztn9N
# FZvyzGG707dFaEDxIr4pl7n+lHJto29LMlSXlocANwG6wFNP3nfkSw/dXw3nkZZK
# pOfrQKvnnunJKBd7495LYZxTDe505Q==
# =/k97
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 28 Feb 2024 09:55:09 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-maintainer-updates-280224-1' of https://gitlab.com/stsquad/qemu: (29 commits)
docs/devel: plugins can trigger a tb flush
docs/devel: document some plugin assumptions
docs/devel: lift example and plugin API sections up
contrib/plugins: extend execlog to track register changes
contrib/plugins: fix imatch
tests/tcg: expand insn test case to exercise register API
plugins: add an API to read registers
plugins: create CPUPluginState and migrate plugin_mask
gdbstub: expose api to find registers
plugins: Use different helpers when reading registers
cpu: call plugin init hook asynchronously
linux-user: ensure nios2 processes queued work
plugins: fix order of init/idle/resume callback
plugins: add qemu_plugin_num_vcpus function
plugins: remove previous n_vcpus functions from API
gdbstub: Add members to identify registers to GDBFeature
hw/core/cpu: Remove gdb_get_dynamic_xml member
gdbstub: Infer number of core registers from XML
gdbstub: Simplify XML lookup
gdbstub: Change gdb_get_reg_cb and gdb_set_reg_cb
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When scoreboards need to be reallocated.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213094009.150349-8-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-30-alex.bennee@linaro.org>
While we attempt to hide implementation details from the plugin we
shouldn't be totally obtuse. Let the user know what they can and can't
expect with the various instrumentation options.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-29-alex.bennee@linaro.org>
This makes them a bit more visible in the TCG emulation menu rather
than hiding them away bellow the ToC limit.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-28-alex.bennee@linaro.org>
With the new plugin register API we can now track changes to register
values. Currently the implementation is fairly dumb which will slow
down if a large number of register values are being tracked. This
could be improved by only instrumenting instructions which mention
registers we are interested in tracking.
Example usage:
./qemu-aarch64 -D plugin.log -d plugin \
-cpu max,sve256=on \
-plugin contrib/plugins/libexeclog.so,reg=sp,reg=z\* \
./tests/tcg/aarch64-linux-user/sha512-sve
will display in the execlog any changes to the stack pointer (sp) and
the SVE Z registers.
As testing registers every instruction will be quite a heavy operation
there is an additional flag which attempts to optimise the register
tracking by only instrumenting instructions which are likely to change
its value. This relies on the QEMU disassembler showing up the register
names in disassembly so is an explicit opt-in.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Based-On: <20231025093128.33116-19-akihiko.odaki@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-27-alex.bennee@linaro.org>
We can't directly save the ephemeral imatch from argv as that memory
will get recycled.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-26-alex.bennee@linaro.org>
This ensure we at least read every register the plugin API reports at
least once during the check-tcg checks.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-25-alex.bennee@linaro.org>
We can only request a list of registers once the vCPU has been
initialised so the user needs to use either call the get function on
vCPU initialisation or during the translation phase.
We don't expose the reg number to the plugin instead hiding it behind
an opaque handle. For now this is just the gdb_regnum encapsulated in
an anonymous GPOINTER but in future as we add more state for plugins
to track we can expand it.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1706
Based-on: <20231025093128.33116-18-akihiko.odaki@daynix.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-24-alex.bennee@linaro.org>
As we expand the per-vCPU data for plugins we don't want to pollute
CPUState. For now this just moves the plugin_mask (renamed to
event_mask) as the memory callbacks are accessed directly by TCG
generated code.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-23-alex.bennee@linaro.org>
Expose an internal API to QEMU to return all the registers for a vCPU.
The list containing the details required to called gdb_read_register().
Based-on: <20231025093128.33116-15-akihiko.odaki@daynix.com>
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-22-alex.bennee@linaro.org>
This ensures we run during a cpu_exec, which allows to call start/end
exclusive from this init hook (needed for new scoreboard API introduced
later).
async work is run before any tb is translated/executed, so we can
guarantee plugin init will be called before any other hook.
The previous change made sure that any idle/resume cb call will not be
done before initializing plugin for a given vcpu.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240213094009.150349-5-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-20-alex.bennee@linaro.org>
While async processes are rare for linux-user we do use them from time
to time. The most obvious one is tb_flush when we run out of
translation space. We will also need this when we move plugin
vcpu_init to an async task.
Fix nios2 to follow its older, wiser and more stable siblings.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-19-alex.bennee@linaro.org>
We found that vcpu_init_hook was called *after* idle callback.
vcpu_init is called from cpu_realize_fn, while idle/resume cb are called
from qemu_wait_io_event (in vcpu thread).
This change ensures we only call idle and resume cb only once a plugin
was init for a given vcpu.
Next change in the series will run vcpu_init asynchronously, which will
make it run *after* resume callback as well. So we fix this now.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240213094009.150349-4-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-18-alex.bennee@linaro.org>
We now keep track of how many vcpus were started. This way, a plugin can
easily query number of any vcpus at any point of execution, which
unifies user and system mode workflows.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213094009.150349-3-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-17-alex.bennee@linaro.org>
This information is already accessible using qemu_info_t during plugin
install.
We will introduce another function (qemu_plugin_num_vcpus) which
represent how many cpus were enabled, by tracking new cpu indexes.
It's a breaking change, so we bump API version.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213094009.150349-2-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-16-alex.bennee@linaro.org>
These members will be used to help plugins to identify registers.
The added members in instances of GDBFeature dynamically generated by
CPUs will be filled in later changes.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20231213-gdb-v17-10-777047380591@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-15-alex.bennee@linaro.org>
This function is no longer used.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231213-gdb-v17-9-777047380591@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-14-alex.bennee@linaro.org>
GDBFeature has the num_regs member so use it where applicable to
remove magic numbers.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20231213-gdb-v17-8-777047380591@daynix.com>
[AJB: remove core reg check from microblaze read reg]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-13-alex.bennee@linaro.org>
Now we know all instances of GDBFeature that is used in CPU so we can
traverse them to find XML. This removes the need for a CPU-specific
lookup function for dynamic XMLs.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231213-gdb-v17-7-777047380591@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-12-alex.bennee@linaro.org>
Align the parameters of gdb_get_reg_cb and gdb_set_reg_cb with the
gdb_read_register and gdb_write_register members of CPUClass to allow
to unify the logic to access registers of the core and coprocessors
in the future.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231213-gdb-v17-6-777047380591@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-11-alex.bennee@linaro.org>
Simplify GDBRegisterState by replacing num_regs and xml members with
one member that points to GDBFeature.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231213-gdb-v17-5-777047380591@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-10-alex.bennee@linaro.org>
This is a tree-wide change to introduce GDBFeature parameter to
gdb_register_coprocessor(). The new parameter just replaces num_regs
and xml parameters for now. GDBFeature will be utilized to simplify XML
lookup in a following change.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231213-gdb-v17-4-777047380591@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-9-alex.bennee@linaro.org>
In preparation for a change to use GDBFeature as a parameter of
gdb_register_coprocessor(), convert the internal representation of
dynamic feature from plain XML to GDBFeature.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20231213-gdb-v17-3-777047380591@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-8-alex.bennee@linaro.org>
In preparation for a change to use GDBFeature as a parameter of
gdb_register_coprocessor(), convert the internal representation of
dynamic feature from plain XML to GDBFeature.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231213-gdb-v17-2-777047380591@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-7-alex.bennee@linaro.org>
In preparation for a change to use GDBFeature as a parameter of
gdb_register_coprocessor(), convert the internal representation of
dynamic feature from plain XML to GDBFeature.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231213-gdb-v17-1-777047380591@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-6-alex.bennee@linaro.org>
Fabiano Rosas