Reproduce issue with
configure --enable-qom-cast-debug ...
qemu-system-x86_64 -display none -machine q35,cxl=on -device pxb-cxl,bus=pcie.0
hw/pci-bridge/pci_expander_bridge.c:54:PXB_DEV: Object 0x5570e0b1ada0 is not an instance of type pxb
Aborted
The type conversion results in the right state structure, but PXB_DEV is
not a parent of PXB_CXL_DEV hence the error. Rather than directly
cleaning up the inheritance, this is the minimal fix which will be
followed by the cleanup.
Fixes: 154070eaf6 ("hw/pxb-cxl: Support passthrough HDM Decoders unless overridden")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230420142750.6950-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Convert pci-testdev.txt to reStructuredText. Includes
some minor wordsmithing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230420160334.1048224-4-peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Convert pci-serial.txt to reStructuredText. This includes
some wordsmithing, and the correction of the docs to note
that the Windows inf file includes 2x and 4x support
(as it has done since commit dc9528fdf9 in 2014).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230420160334.1048224-3-peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Convert the pci-ids document from plain text to reStructuredText.
I opted to use definition-lists here because rST tables are
super-clunky, and actually formatting these as tables didn't
seem necessary.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230420160334.1048224-2-peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
with Q35 using ACPI PCI hotplug by default, user's request to unplug
device is ignored when it's issued before guest OS has been booted.
And any additional attempt to request device hot-unplug afterwards
results in following error:
"Device XYZ is already in the process of unplug"
arguably it can be considered as a regression introduced by [2],
before which it was possible to issue unplug request multiple
times.
Accept new uplug requests after timeout (1ms). This brings ACPI PCI
hotplug on par with native PCIe unplug behavior [1] and allows user
to repeat unplug requests at propper times.
Set expire timeout to arbitrary 1msec so user won't be able to
flood guest with SCI interrupts by calling device_del in tight loop.
PS:
ACPI spec doesn't mandate what OSPM can do with GPEx.status
bits set before it's booted => it's impl. depended.
Status bits may be retained (I tested with one Windows version)
or cleared (Linux since 2.6 kernel times) during guest's ACPI
subsystem initialization.
Clearing status bits (though not wrong per se) hides the unplug
event from guest, and it's upto user to repeat device_del later
when guest is able to handle unplug requests.
1) 18416c62e3 ("pcie: expire pending delete")
2)
Fixes: cce8944cc9 ("qdev-monitor: Forbid repeated device_del")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
CC: mst@redhat.com
CC: anisinha@redhat.com
CC: jusual@redhat.com
CC: kraxel@redhat.com
Message-Id: <20230418090449.2155757-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Since the driver doesn't support interrupts, we must return early when
index is set to VIRTIO_CONFIG_IRQ_IDX.
Fixes: 544f0278af ("virtio: introduce macro VIRTIO_CONFIG_IRQ_IDX")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <d53ec8bc002001eafac597f6bd9a8812df989257.1681790067.git.viresh.kumar@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The documentation used to say there is no device implemented with
SR-IOV, but igb and nvme support SR-IOV today.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230414090441.23156-1-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 1b2b12376c ("intel-iommu: PASID support") takes PASID into
account when calculating iotlb hash like:
static guint vtd_iotlb_hash(gconstpointer v)
{
const struct vtd_iotlb_key *key = v;
return key->gfn | ((key->sid) << VTD_IOTLB_SID_SHIFT) |
(key->level) << VTD_IOTLB_LVL_SHIFT |
(key->pasid) << VTD_IOTLB_PASID_SHIFT;
}
This turns out to be problematic since:
- the shift will lose bits if not converting to uint64_t
- level should be off by one in order to fit into 2 bits
- VTD_IOTLB_PASID_SHIFT is 30 but PASID is 20 bits which will waste
some bits
- the hash result is uint64_t so we will lose bits when converting to
guint
So this patch fixes them by
- converting the keys into uint64_t before doing the shift
- off level by one to make it fit into two bits
- change the sid, lvl and pasid shift to 26, 42 and 44 in order to
take the full width of uint64_t
- perform an XOR to the top 32bit with the bottom 32bit for the final
result to fit guint
Fixes: Coverity CID 1508100
Fixes: 1b2b12376c ("intel-iommu: PASID support")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230412073510.7158-1-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20230409201828.1159568-1-sw@weilnetz.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
I'd like to be notified on SVQ patches and review them.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230331150410.2627214-1-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Coverity complains that memset() writes over a const field. Use
an initializer instead, so that the const field is left to zero.
Tests that have to write the const field already use an initializer
for the whole struct, here I am choosing the smallest possible
patch (which is not that small already).
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230330131109.47856-1-pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
i440fx machine versions 2.3 and newer supports dynamic ram
resizing. See commit a1666142db ("acpi-build: make ROMs RAM blocks resizeable") .
Currently supported all q35 machine types (versions 2.4 and newer) supports
resizable RAM/ROM blocks.Therefore the warning generated when the ACPI table
size exceeds a pre-defined value does not apply to those machine versions.
Add a check limiting the warning message to only those machines that does not
support expandable ram blocks (that is, i440fx machines with version 2.2
and older).
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20230329045726.14028-1-anisinha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Updating mailmap to indicate ani@anisinha.ca and anisinha@redhat.com are one
and the same person. Also updating my email in MAINTAINERS for all my acpi work
(reviewing patches and biosbits) to my work email. Also doing the same for
bios bits test framework documentation.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20230329040834.11973-1-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The event filename is an absolute path. Convert it to a relative path when
writing '#line' directives, to preserve reproducibility of the generated
output when different base paths are used.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230406080045.21696-1-thomas.de_schampheleire@nokia.com>
Introduce the BdrvDmgUncompressFunc type defintion. To emphasis
dmg_uncompress_bz2 and dmg_uncompress_lzfse are pointer to functions,
declare them using this new typedef.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230320152610.32052-1-philmd@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Everything that was reviewed since last PULL request:
- fix to control flow (eric)
- rearrange of hmp commands (juan)
- Make capabilities more consistent and coherent (juan)
Not all of them reviewed yet, so only the ones reviewed.
Later, Juan.
PD. I am waiting to finish review of the compression fixes to send
them.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmRGf0kACgkQ9IfvGFhy
1yNojRAAhvOZoYRpTizbSo7wOr2TpO4F1R/opWECubBvw3/yTo3ifsVjovRo/nxe
zmCXnY/ykqxskb/OMNyLZQYG4MPT24nyf7dhT3VxcFjTYsaNU59yvJoBtvy7Oq5h
3Yk0459eKmsP39IXFlAMMRBwX+Hu3aE/8xAAHOowAhkmDkMFYjf7I1Lxpuarbhp+
k9O5eqdNchG21YUzWXUe4ivAWqZmvzXtkwCp+XJ/KizjIEKgsm8HO1nwm5mtpmnu
SS9Kkf957jYHqK73YXQhUV+iQ0kCVpclBPfZc2KuzudPi/aMG6LEVKfV//z5KIAz
amME/6D1oSBfpgtqoCCPELdNfZOz+ZIa+XJzXlWkuiBDu9yNpUP339EVClmStwFu
1UAOJIs8VUjPr9zTItgCDjZ17nh4Q0I04aMGuxgQIu82e8CTgS/QrnH2Tr2lUoMO
QLgYAetVIDGVVFAA9Clba4C7AbS5hBeWMnd9Qd4cP93d6Z/C65xUv0a9mI7edpMb
RNbvg73ZZCb6tye25cPSr07VaGTS+TELVMEh9RX3KZrfMTsHfGQ/ZHZv9wqJrQ04
0wCidqBIbBk+BN8AtJ9vwqtPpL/Nf/BwDKPiwOVuZHCcrP+veXtlKb00SwNpJwkN
x3Ld4cq22ZLeqO4dMueK16ij0ZpuXsF7jM/ptEvxrw6oxh/6xYQ=
=g5gx
-----END PGP SIGNATURE-----
Merge tag 'migration-20230424-pull-request' of https://gitlab.com/juan.quintela/qemu into staging
Migration Pull request
Everything that was reviewed since last PULL request:
- fix to control flow (eric)
- rearrange of hmp commands (juan)
- Make capabilities more consistent and coherent (juan)
Not all of them reviewed yet, so only the ones reviewed.
Later, Juan.
PD. I am waiting to finish review of the compression fixes to send
them.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmRGf0kACgkQ9IfvGFhy
# 1yNojRAAhvOZoYRpTizbSo7wOr2TpO4F1R/opWECubBvw3/yTo3ifsVjovRo/nxe
# zmCXnY/ykqxskb/OMNyLZQYG4MPT24nyf7dhT3VxcFjTYsaNU59yvJoBtvy7Oq5h
# 3Yk0459eKmsP39IXFlAMMRBwX+Hu3aE/8xAAHOowAhkmDkMFYjf7I1Lxpuarbhp+
# k9O5eqdNchG21YUzWXUe4ivAWqZmvzXtkwCp+XJ/KizjIEKgsm8HO1nwm5mtpmnu
# SS9Kkf957jYHqK73YXQhUV+iQ0kCVpclBPfZc2KuzudPi/aMG6LEVKfV//z5KIAz
# amME/6D1oSBfpgtqoCCPELdNfZOz+ZIa+XJzXlWkuiBDu9yNpUP339EVClmStwFu
# 1UAOJIs8VUjPr9zTItgCDjZ17nh4Q0I04aMGuxgQIu82e8CTgS/QrnH2Tr2lUoMO
# QLgYAetVIDGVVFAA9Clba4C7AbS5hBeWMnd9Qd4cP93d6Z/C65xUv0a9mI7edpMb
# RNbvg73ZZCb6tye25cPSr07VaGTS+TELVMEh9RX3KZrfMTsHfGQ/ZHZv9wqJrQ04
# 0wCidqBIbBk+BN8AtJ9vwqtPpL/Nf/BwDKPiwOVuZHCcrP+veXtlKb00SwNpJwkN
# x3Ld4cq22ZLeqO4dMueK16ij0ZpuXsF7jM/ptEvxrw6oxh/6xYQ=
# =g5gx
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 24 Apr 2023 02:08:25 PM BST
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [undefined]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* tag 'migration-20230424-pull-request' of https://gitlab.com/juan.quintela/qemu: (30 commits)
migration: Create migrate_max_bandwidth() function
migration: Move migrate_postcopy() to options.c
migration: Create migrate_cpu_throttle_tailslow() function
migration: Create migrate_cpu_throttle_increment() function
migration: Create migrate_cpu_throttle_initial() to option.c
migration: Move migrate_announce_params() to option.c
migration: Create migrate_max_cpu_throttle()
migration: Create migrate_checkpoint_delay()
migration: Create migrate_throttle_trigger_threshold()
migration: Move migrate_use_block_incremental() to option.c
migration: Use migrate_max_postcopy_bandwidth()
migration: Move parameters functions to option.c
migration: Move migrate_cap_set() to options.c
migration: Move qmp_migrate_set_capabilities() to options.c
migration: Move qmp_query_migrate_capabilities() to options.c
migration: Move migrate_caps_check() to options.c
migration: Create migrate_rdma_pin_all() function
migration: Move migrate_use_return() to options.c
migration: Move migrate_use_block() to options.c
migration: Move migrate_use_xbzrle() to options.c
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The C code generator fails to honor 'if' conditions of command and
event arguments.
For instance, tests/qapi-schema/qapi-schema-test.json has
{ 'event': 'TEST_IF_EVENT',
'data': { 'foo': 'TestIfStruct',
'bar': { 'type': ['str'], 'if': 'TEST_IF_EVT_ARG' } },
'if': { 'all': ['TEST_IF_EVT', 'TEST_IF_STRUCT'] } }
Generated tests/test-qapi-events.h fails to honor the TEST_IF_EVT_ARG
condition:
#if defined(TEST_IF_EVT) && defined(TEST_IF_STRUCT)
void qapi_event_send_test_if_event(TestIfStruct *foo, strList *bar);
#endif /* defined(TEST_IF_EVT) && defined(TEST_IF_STRUCT) */
Only uses so far are in tests/.
We could fix the generator to emit something like
#if defined(TEST_IF_EVT) && defined(TEST_IF_STRUCT)
void qapi_event_send_test_if_event(TestIfStruct *foo
#if defined(TEST_IF_EVT_ARG)
, strList *bar
#endif
);
#endif /* defined(TEST_IF_EVT) && defined(TEST_IF_STRUCT) */
Ugly. Calls become similarly ugly. Not worth fixing.
Conditional arguments work fine with 'boxed': true, simply because
complex types with conditional members work fine. Not worth breaking.
Reject conditional arguments unless boxed.
Move the tests cases covering unboxed conditional arguments out of
tests/qapi-schema/qapi-schema-test.json. Cover boxed conditional
arguments there instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230316071325.492471-15-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230316071325.492471-13-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Union TestIfUnion is conditional on macros TEST_IF_UNION and
TEST_IF_STRUCT. It uses TestIfEnum, which is conditional on macro
TEST_IF_ENUM. If TEST_IF_UNION and TEST_IF_STRUCT are defined, but
TEST_IF_ENUM isn't, the generated code won't compile.
Command test-if-cmd is conditional an macros TEST_IF_CMD and
TEST_IF_STRUCT, and uses TestIfEnum. Similar issue.
Event TEST_IF_EVENT is conditional an macros TEST_IF_EVT and
TEST_IF_STRUCT, and uses TestIfEnum. Similar issue.
Replace the uses of TestIfEnum in the latter two by str.
TestIfUnion is now TestIfEnum's only user. Change TestIfEnum's
condition to TEST_IF_UNION.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230316071325.492471-12-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message corrected]
A union's 'discriminator' must name one of the common members.
QAPISchemaVariants.check() looks it up by its c_name(), then checks
the name matches exactly (because c_name() is not injective).
Tests union-base-empty and union-invalid-discriminator both cover the
case where lookup fails. Repurpose the latter to cover the case where
it succeeds and the name check fails.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230316071325.492471-10-armbru@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message typo fixed]
A struct's 'data' must be a JSON object defining the struct's members.
The QAPI code generator incorrectly accepts a JSON string instead, and
then crashes in QAPISchema._make_members() called from
._def_struct_type().
Fix to reject it: factor check_type_implicit() out of
check_type_name_or_implicit(), and switch check_struct() to use it
instead. Also add a test case.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230316071325.492471-9-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[More detailed commit message]
We incorrectly report "FOO should be a type name" when it could also
be an array. Fix that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230316071325.492471-8-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We reject array types in certain places with "cannot be an array".
Deleting this check improves the error message to "should be a type
name" or "should be an object or type name", depending on context, so
do that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230316071325.492471-6-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
check_type() can check type names, arrays, and implicit struct types.
Callers pass flags to select from this menu. This makes the function
somewhat hard to read. Moreover, a few minor bugs are hiding in
there, as we'll see shortly.
Split it into check_type_name(), check_type_name_or_array(), and
check_type_name_or_implicit(). Each of them is a copy of the original
specialized to a certain set of flags.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230316071325.492471-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message corrected]
Commit 4e99f4b12c (qapi: Drop simple unions) missed a bit of code
dealing with simple union branches. Drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230316071325.492471-4-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Commit 2cae67bcb5 (qapi: Use super() now we have Python 3) converted
the code to super(). Shortly after, commit f965e8fea6 (qapi: New
special feature flag "deprecated") neglected to use super(). Convert
it now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230316071325.492471-3-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Commit 52a474180a changed reporting of errors connected to a source
location without mentioning it in the commit message. For instance,
$ python scripts/qapi-gen.py tests/qapi-schema/unknown-escape.json
tests/qapi-schema/unknown-escape.json:3:21: unknown escape \x
became
scripts/qapi-gen.py: tests/qapi-schema/unknown-escape.json:3:21: unknown escape \x
This is not how compilers report such errors, and Emacs doesn't
recognize the format. Revert this change.
Fixes: 52a474180a (qapi-gen: Separate arg-parsing from generation)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230316071325.492471-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
To be consistent with every other parameter, rename to
migrate_block_incremental().
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
---
Fixed missing space after comma (fabiano)
Once that we are there, we rename the function to migrate_return_path()
to be consistent with all other capabilities.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Once that we are there, we rename the function to migrate_block()
to be consistent with all other capabilities.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Once that we are there, we rename the function to migrate_xbzrle()
to be consistent with all other capabilities.
We change the type to return bool also for consistency.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Jonathan Cameron