To implement the FEAT_EBF16 semantics, we are going to need
the CPUARMState env pointer in every helper function which calls
bfdotadd().
Pass the env pointer through from generated code to the sme_bfmopa
helper. (We'll add the code that uses it when we've adjusted
all the helpers to have access to the env pointer.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
FEAT_EBF16 adds one new bit to the FPCR floating point control
register. Allow this bit to be read and written when the ID
registers indicate the presence of the feature.
Note that because this new bit is not in FPSCR_FPCR_MASK the bit is
not visible in the AArch32 FPSCR, and FPSCR writes do not affect it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add a Xen PVH x86 machine based on the abstract PVH Machine.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add support for optionally creating a PCIe/GPEX controller.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
We've been creating the virtio-mmio devices in forwards order
but since the qbus lists prepend (rather than append) entries,
the virtio busses end up with decreasing base address order.
Xen enables virtio-mmio nodes in forwards order so there's been
a missmatch. So far, we've been working around this with an
out-of-tree patch to Xen.
This reverses the order making sure the virtio busses end up
ordered with increasing base addresses avoiding the need to
patch Xen.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Rename xen_arm.c -> xen-pvh.c to better express that this
is a PVH machine and to align with x86 HVM and future PVH
machine filenames:
hw/i386/xen/xen-hvm.c
hw/i386/xen/xen-pvh.c (in preparation)
No functional changes.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Break out a common Xen PVH machine in preparation for
adding a x86 Xen PVH machine.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add SMP support for Xen PVH ARM guests.
Create ms->smp.max_cpus ioreq servers to handle hotplug.
Note that ms->smp.max_cpus will be passed to us by the
user (Xen tools) set to the guests maxvcpus.
The value in mc->max_cpus is an absolute maximum for the
-smp option and won't be used to setup ioreq servers unless
the user explicitly specifies it with -smp.
If the user doesn't pass -smp on the command-line, smp.cpus
and smp.max_cpus will default to 1.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Tweak machine description to better express that this is
a Xen PVH machine for ARM.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Update file header to use SPDX and remove stray empty
comment line.
No functional changes.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Two important patches for the hppa target which missed qemu-v9.1:
- One fix for random linux-user crashes
- One fix for random issues due to loosing the division V-bit
during delivery of hardware interrupts. This triggers all sorts
of random faults when running in system mode.
Helge
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZtgy9AAKCRD3ErUQojoP
X068AQCDCwbzsoQpFX/6Kx2lm3UsW4wrESh/CYcP+epd+X59dAD+LxNwN0ol5Gvl
kPzM+7QdKC7geIXvBxIG6UuggTscJgM=
=9roy
-----END PGP SIGNATURE-----
Merge tag 'hppa-v9.1-fixes-pull-request' of https://github.com/hdeller/qemu-hppa into staging
hppa target fixes
Two important patches for the hppa target which missed qemu-v9.1:
- One fix for random linux-user crashes
- One fix for random issues due to loosing the division V-bit
during delivery of hardware interrupts. This triggers all sorts
of random faults when running in system mode.
Helge
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZtgy9AAKCRD3ErUQojoP
# X068AQCDCwbzsoQpFX/6Kx2lm3UsW4wrESh/CYcP+epd+X59dAD+LxNwN0ol5Gvl
# kPzM+7QdKC7geIXvBxIG6UuggTscJgM=
# =9roy
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 04 Sep 2024 11:14:12 BST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-v9.1-fixes-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: Fix random 32-bit linux-user crashes
target/hppa: Fix PSW V-bit packaging in cpu_hppa_get for hppa64
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Document the new functional testing framework. The text is originally
based on the Avocado documentation, but heavily modified to match the
new framework.
Message-ID: <20240830133841.142644-45-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The avocado_qemu.Test class has been renamed a while back in commit
2283b627bc ("tests/avocado: Rename avocado_qemu.Test -> QemuSystemTest"),
so we should reflect this now in the documentation, too.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240830133841.142644-44-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The main testing documentation file got very overloaded already.
Thus let's split the Avocado information into a separate file.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240830133841.142644-43-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Building and testing are two separate topics, so let's split the testing
into a separate category and move the related files into a separate folder.
Message-ID: <20240830133841.142644-42-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that we converted many tests from the "check-avocado" test suite
to the "check-functional" test suite, we should make sure that these
also get tested in the CI.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-41-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The single test that was using the QemuUserTest class
has been converted to the functional test framework.
This class is now unused, remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240822104238.75045-4-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240830133841.142644-40-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Straight forward conversion. Update the SHA1 hashes to
SHA256 hashes since SHA1 should not be used anymore nowadays.
Expose cpio_extract() in qemu_test.utils for possible reuse.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240822104238.75045-3-philmd@linaro.org>
[thuth: Add test to meson.build]
Message-ID: <20240830133841.142644-39-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Per commit 5334df4822 ("tests/avocado: Introduce
QemuUserTest base class"):
Similarly to the 'System' Test base class with methods
for testing system emulation, the QemuUserTest class
contains methods useful to test user-mode emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240822104238.75045-2-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240830133841.142644-38-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Straight forward conversion. Update the SHA1 hashes to
SHA256 hashes since SHA1 should not be used anymore nowadays.
Since the asset is expected locally and the test is guarded
with RESCUE_YL_PATH, keep it under the 'quick' category.
$ RESCUE_YL_PATH=/path/to/rescue-yl QEMU_TEST_ALLOW_UNTRUSTED_CODE=1 \
make check-functional-mips64el
1/4 qemu:func-quick+func-mips64el / func-mips64el-empty_cpu_model OK 0.12s 1 subtests passed
2/4 qemu:func-quick+func-mips64el / func-mips64el-version OK 0.13s 1 subtests passed
3/4 qemu:func-quick+func-mips64el / func-mips64el-info_usernet OK 0.15s 1 subtests passed
4/4 qemu:func-quick+func-mips64el / func-mips64el-mips64el_fuloong2e OK 0.19s 1 subtests passed
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240827094905.80648-2-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240830133841.142644-37-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Straight forward conversion. Update the SHA1 hash to
SHA256 since SHA1 should not be used anymore nowadays.
Provide get_qemu_img() helper in qemu_test.
$ make check-functional-aarch64 V=1
▶ 1/4 test_aarch64_virt.Aarch64VirtMachine.test_aarch64_virt_gicv2 OK
▶ 1/4 test_aarch64_virt.Aarch64VirtMachine.test_aarch64_virt_gicv3 OK
▶ 1/4 test_aarch64_virt.Aarch64VirtMachine.test_alpine_virt_tcg_gic_max OK
1/4 qemu:func-thorough+func-aarch64-thorough+thorough / func-aarch64-aarch64_virt OK 30.44s 3 subtests passed
...
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240826103634.52384-1-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240830133841.142644-36-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Straight forward conversion. Since SBSA_FLASH files are not
tarballs, use lzma_uncompress() method.
Avocado used to set a timeout of 11 tests * 180s = 1980s.
Hopefully 600s should be sufficient.
Running on macOS Sonoma / Apple silicon M1:
$ QEMU_TEST_TIMEOUT_EXPECTED=1 make check-functional-aarch64 V=1
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_alpine_linux_max OK
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_alpine_linux_max_pauth_impdef OK
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_alpine_linux_max_pauth_off OK
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_alpine_linux_neoverse_n1 OK
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_edk2_firmware OK
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_openbsd73_cortex_a57 OK
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_openbsd73_max OK
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_openbsd73_max_pauth_impdef OK
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_openbsd73_max_pauth_off OK
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_openbsd73_neoverse_n1 OK
1/5 qemu:func-thorough+func-aarch64-thorough+thorough / func-aarch64-aarch64_sbsaref OK 241.79s 11 subtests passed
...
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240823131614.10269-1-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-ID: <20240830133841.142644-35-thuth@redhat.com>
[thuth: remove remaining Avocado tags]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Straight forward conversion. Update the SHA1 hashes to SHA256
hashes since SHA1 should not be used anymore nowadays.
$ QEMU_TEST_ALLOW_UNTRUSTED_CODE=1 make check-functional-arm
...
6/6 qemu:func-thorough+func-arm-thorough+thorough / func-arm-arm_integratorcp OK 3.90s 2 subtests passed
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240822110238.82312-1-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240830133841.142644-34-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
While we're at it, update the SHA1 hashes to SHA256 hashes since
SHA1 should not be used anymore nowadays.
Message-ID: <20240830133841.142644-32-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Provide a "gzip_uncompress" function based on the standard "gzip" module
to avoid the usage of avocado.utils here.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-31-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Mostly a straight-forward conversion. Looks like we can simply drop
the avocado datadrainer stuff when not using the avocado framework
anymore.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-30-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The code that handles running of tesseract needs to be tweaked a little
bit to be able to run without the functions from avocado.utils, and
while we're at it, drop some legacy stuff that was still there due to
Tesseract 3 support that we already dropped a while ago.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-29-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
A straight forward conversion, we just also have to remove the decorator
@skipUnless(os.getenv('SPEED')) since all non-trivial functional tests
are running in SPEED=thorough mode now. Also make sure that the extracted
assets are writable, so that the test does not fail if it gets re-run
and there are stale read-only files already around.
Message-ID: <20240830133841.142644-28-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use the Python standard zipfile module instead of avocado.utils for
extracting the ZIP file that we download here, and use the standard
subprocess module for running the "tail" command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-27-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Nothing thrilling in here, just straight forward conversions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-26-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Nothing thrilling in here, it's just a straight forward conversion.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-25-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The machine_microblaze.py file contained two tests, one for each
endianness. Since we only support one QEMU target binary per file
in the new functional test environment, we have to split this file
up into two files now.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-23-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Nothing thrilling in here, it's just a straight forward conversion.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-22-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These tests use archive.lzma_uncompress() from the Avocado utils,
so provide a small helper function for this, based on the
standard lzma module from Python instead.
And while we're at it, replace the MD5 hashes in the topology test
with proper SHA256 hashes, since MD5 should not be used anymore
nowadays.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-21-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Instead of using the "archive" module from avocado.utils, switch
these tests to use the new wrapper function that is based on the
"tarfile" module instead.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-20-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some Avocado-based tests use the "archive" module from avocado.utils
to extract files from an archive. To be able to use these tests
without Avocado, we have to provide our own function for extracting
files. Fortunately, there is already the tarfile module that will
provide us with this functionality, so let's just add a nice wrapper
function around that.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240830133841.142644-19-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that we've got the Asset class with pre-caching, we can convert
some Avocado tests that use fetch_asset() for downloading their
required files.
Message-ID: <20240830133841.142644-18-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When running "make -j$(nproc) check-functional", tests that use the
same asset might be running in parallel. Improve the downloading to
detect this situation and wait for the other thread to finish the
download.
Message-ID: <20240830133841.142644-17-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Many tests need to access assets stored on remote sites. We don't want
to download these during test execution when run by meson, since this
risks hitting test timeouts when data transfers are slow.
Add support for pre-emptive caching of assets by setting the env var
QEMU_TEST_PRECACHE to point to a timestamp file. When this is set,
instead of running the test, the assets will be downloaded and saved
to the cache, then the timestamp file created.
A meson custom target is created as a dependency of each test suite
to trigger the pre-emptive caching logic before the test runs.
When run in caching mode, it will locate assets by looking for class
level variables with a name prefix "ASSET_", and type "Asset".
At the ninja level
ninja test --suite functional
will speculatively download any assets that are not already cached,
so it is advisable to set a timeout multiplier.
QEMU_TEST_NO_DOWNLOAD=1 ninja test --suite functional
will fail the test if a required asset is not already cached
ninja precache-functional
will download and cache all assets required by the functional
tests
At the make level, precaching is always done by
make check-functional
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
[thuth: Remove the duplicated "path = os.path.basename(...)" line]
Message-ID: <20240830133841.142644-16-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The 'Asset' class is a simple module that declares a downloadable
asset that can be cached locally. Downloads are stored in the user's
home dir at ~/.cache/qemu/download, using a sha256 sum of the URL.
[thuth: Drop sha1 support, use hash on file content for naming instead of URL,
add the possibility to specify the cache dir via environment variable]
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-15-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These simple tests can be converted to stand-alone tests quite easily,
e.g. by just setting the machine to 'none' now manually or by adding
"-cpu" command line parameters, since we don't support the corresponding
avocado tags in the new python test framework.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-14-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These test are rather simple and don't need any modifications apart
from adjusting the "from avocado_qemu" line. To ease debugging, make
the files executable and add a shebang line and Python '__main__'
handling, too, so that these tests can now be run by executing them
directly.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-13-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Provide a meson.build file for the upcoming python-based functional
tests, and add some wrapper glue targets to the tests/Makefile.include
file. We are going to use two "speed" modes for the functional tests:
The "quick" tests can be run at any time (i.e. also during "make check"),
while the "thorough" tests should only be run when running a
"make check-functional" test run (since these tests might download
additional assets from the internet).
The changes to the meson.build files are partly based on an earlier
patch by Ani Sinha.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-12-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The next patch is going to add some entries that need more space between
the command and the help text, so let's increase the indentation here
first.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20240830133841.142644-11-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Create log files for each test separately, one file that contains
the basic logging and one that contains the console output.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240830133841.142644-10-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Peter Maydell