Added sigcode setup function for signal trampoline which initializes a sequence of instructions
to handle signal returns and exits, copying this code to the target offset.
Defined ARM AArch64 specific signal definitions including register indices and sizes,
and introduced structures to represent general purpose registers, floating point registers, and machine context.
Added function to set up signal handler arguments, populating register values in `CPUARMState`
based on the provided signal, signal frame, signal action, and frame address.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Ajeet Singh <itachis@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Co-authored-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240707191128.10509-5-itachis@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Added function to access rval2 by accessing the x1 register.
Defined ARM AArch64 ELF parameters including mmap and dynamic load addresses.
Introduced extensive hardware capability definitions and macros for retrieving hardware capability (hwcap) flags.
Implemented function to retrieve ARM AArch64 hardware capabilities using the `GET_FEATURE_ID` macro.
Added function to retrieve extended ARM AArch64 hardware capability flags.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Ajeet Singh <itachis@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Co-authored-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240707191128.10509-4-itachis@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Added header file for managing CPU register states in FreeBSD user mode.
Introduced prototypes for setting and getting thread-local storage (TLS).
Implemented AArch64 sysarch() system call emulation and a printing function.
Added function for setting up thread upcall to add thread support to BSD-USER.
Initialized thread's register state during thread setup.
Updated ARM AArch64 VM parameter definitions for bsd-user, including address spaces for FreeBSD/arm64 and
a function for getting the stack pointer from CPU and setting a return value.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Ajeet Singh <itachis@FreeBSD.org>
Co-authored-by: Jessica Clarke <jrtc27@jrtc27.com>
Co-authored-by: Sean Bruno <sbruno@freebsd.org>
Co-authored-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240707191128.10509-3-itachis@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Added function to initialize ARM CPU and check if it supports 64-bit mode.
Implemented CPU loop function to handle exceptions and emulate execution of instructions.
Added function to clone CPU state to create a new thread.
Included AArch64 specific CPU functions for bsd-user to set and receive thread-local-storage
value from the tpidr_el0 register.
Introduced structure for storing CPU register states for BSD-USER.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Ajeet Singh <itachis@FreeBSD.org>
Co-authored-by: Kyle Evans <kevans@freebsd.org>
Co-authored-by: Sean Bruno <sbruno@freebsd.org>
Co-authored-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240707191128.10509-2-itachis@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
This piece of code can be shared by both IOTLB invalidation and
PASID-based IOTLB invalidation
No functional changes intended.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-ID: <20240718081636.879544-12-zhenzhong.duan@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This API is specific to TCG (already handled by hardware
accelerators), so restrict it with #ifdef'ry. Remove
unnecessary stubs.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240529155918.6221-1-philmd@linaro.org>
The property 'x-pre-copy-dirty-page-tracking' allows disabling the whole
tracking of VF pre-copy phase of dirty page tracking, though it means
that it will only be used at the start of the switchover phase.
Add an option that disables the VF dirty page tracking, and fall
back into container-based dirty page tracking. This also allows to
use IOMMU dirty tracking even on VFs with their own dirty
tracker scheme.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
By default VFIO migration is set to auto, which will support live
migration if the migration capability is set *and* also dirty page
tracking is supported.
For testing purposes one can force enable without dirty page tracking
via enable-migration=on, but that option is generally left for testing
purposes.
So starting with IOMMU dirty tracking it can use to accommodate the lack of
VF dirty page tracking allowing us to minimize the VF requirements for
migration and thus enabling migration by default for those too.
While at it change the error messages to mention IOMMU dirty tracking as
well.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
[ clg: - spelling in commit log ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
ioctl(iommufd, IOMMU_HWPT_GET_DIRTY_BITMAP, arg) is the UAPI
that fetches the bitmap that tells what was dirty in an IOVA
range.
A single bitmap is allocated and used across all the hwpts
sharing an IOAS which is then used in log_sync() to set Qemu
global bitmaps.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
ioctl(iommufd, IOMMU_HWPT_SET_DIRTY_TRACKING, arg) is the UAPI that
enables or disables dirty page tracking. The ioctl is used if the hwpt
has been created with dirty tracking supported domain (stored in
hwpt::flags) and it is called on the whole list of iommu domains.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
In preparation to using the dirty tracking UAPI, probe whether the IOMMU
supports dirty tracking. This is done via the data stored in
hiod::caps::hw_caps initialized from GET_HW_INFO.
Qemu doesn't know if VF dirty tracking is supported when allocating
hardware pagetable in iommufd_cdev_autodomains_get(). This is because
VFIODevice migration state hasn't been initialized *yet* hence it can't pick
between VF dirty tracking vs IOMMU dirty tracking. So, if IOMMU supports
dirty tracking it always creates HWPTs with IOMMU_HWPT_ALLOC_DIRTY_TRACKING
even if later on VFIOMigration decides to use VF dirty tracking instead.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
[ clg: - Fixed vbasedev->iommu_dirty_tracking assignment in
iommufd_cdev_autodomains_get()
- Added warning for heterogeneous dirty page tracking support
in iommufd_cdev_autodomains_get() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Move the HostIOMMUDevice::realize() to be invoked during the attach of the device
before we allocate IOMMUFD hardware pagetable objects (HWPT). This allows the use
of the hw_caps obtained by IOMMU_GET_HW_INFO that essentially tell if the IOMMU
behind the device supports dirty tracking.
Note: The HostIOMMUDevice data from legacy backend is static and doesn't
need any information from the (type1-iommu) backend to be initialized.
In contrast however, the IOMMUFD HostIOMMUDevice data requires the
iommufd FD to be connected and having a devid to be able to successfully
GET_HW_INFO. This means vfio_device_hiod_realize() is called in
different places within the backend .attach_device() implementation.
Suggested-by: Cédric Le Goater <clg@redhat.cm>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
[ clg: Fixed error handling in iommufd_cdev_attach() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Store the value of @caps returned by iommufd_backend_get_device_info()
in a new field HostIOMMUDeviceCaps::hw_caps. Right now the only value is
whether device IOMMU supports dirty tracking (IOMMU_HW_CAP_DIRTY_TRACKING).
This is in preparation for HostIOMMUDevice::realize() being called early
during attach_device().
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Remove caps::aw_bits which requires the bcontainer::iova_ranges being
initialized after device is actually attached. Instead defer that to
.get_cap() and call vfio_device_get_aw_bits() directly.
This is in preparation for HostIOMMUDevice::realize() being called early
during attach_device().
Suggested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
There's generally two modes of operation for IOMMUFD:
1) The simple user API which intends to perform relatively simple things
with IOMMUs e.g. DPDK. The process generally creates an IOAS and attaches
to VFIO and mainly performs IOAS_MAP and UNMAP.
2) The native IOMMUFD API where you have fine grained control of the
IOMMU domain and model it accordingly. This is where most new feature
are being steered to.
For dirty tracking 2) is required, as it needs to ensure that
the stage-2/parent IOMMU domain will only attach devices
that support dirty tracking (so far it is all homogeneous in x86, likely
not the case for smmuv3). Such invariant on dirty tracking provides a
useful guarantee to VMMs that will refuse incompatible device
attachments for IOMMU domains.
Dirty tracking insurance is enforced via HWPT_ALLOC, which is
responsible for creating an IOMMU domain. This is contrast to the
'simple API' where the IOMMU domain is created by IOMMUFD automatically
when it attaches to VFIO (usually referred as autodomains) but it has
the needed handling for mdevs.
To support dirty tracking with the advanced IOMMUFD API, it needs
similar logic, where IOMMU domains are created and devices attached to
compatible domains. Essentially mimicking kernel
iommufd_device_auto_get_domain(). With mdevs given there's no IOMMU domain
it falls back to IOAS attach.
The auto domain logic allows different IOMMU domains to be created when
DMA dirty tracking is not desired (and VF can provide it), and others where
it is. Here it is not used in this way given how VFIODevice migration
state is initialized after the device attachment. But such mixed mode of
IOMMU dirty tracking + device dirty tracking is an improvement that can
be added on. Keep the 'all of nothing' of type1 approach that we have
been using so far between container vs device dirty tracking.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
[ clg: Added ERRP_GUARD() in iommufd_cdev_autodomains_get() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
mdevs aren't "physical" devices and when asking for backing IOMMU info,
it fails the entire provisioning of the guest. Fix that by setting
vbasedev->mdev true so skipping HostIOMMUDevice initialization in the
presence of mdevs.
Fixes: 9305895201 ("vfio/iommufd: Implement HostIOMMUDeviceClass::realize() handler")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
mdevs aren't "physical" devices and when asking for backing IOMMU info,
it fails the entire provisioning of the guest. Fix that by setting
vbasedev->mdev true so skipping HostIOMMUDevice initialization in the
presence of mdevs.
Fixes: 9305895201 ("vfio/iommufd: Implement HostIOMMUDeviceClass::realize() handler")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
In preparation to implement auto domains have the attach function
return the errno it got during domain attach instead of a bool.
-EINVAL is tracked to track domain incompatibilities, and decide whether
to create a new IOMMU domain.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
The helper will be able to fetch vendor agnostic IOMMU capabilities
supported both by hardware and software. Right now it is only iommu dirty
tracking.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
mdevs aren't "physical" devices and when asking for backing IOMMU info, it
fails the entire provisioning of the guest. Fix that by skipping
HostIOMMUDevice initialization in the presence of mdevs, and skip setting
an iommu device when it is known to be an mdev.
Cc: Zhenzhong Duan <zhenzhong.duan@intel.com>
Fixes: 9305895201 ("vfio/iommufd: Implement HostIOMMUDeviceClass::realize() handler")
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
In preparation to skip initialization of the HostIOMMUDevice for mdev,
extract the checks that validate if a device is an mdev into helpers.
A vfio_device_is_mdev() is created, and subsystems consult VFIODevice::mdev
to check if it's mdev or not.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
In vfio_connect_container's error path, the base container is
removed twice form the VFIOAddressSpace QLIST: first on the
listener_release_exit label and second, on free_container_exit
label, through object_unref(container), which calls
vfio_container_instance_finalize().
Let's remove the first instance.
Fixes: 938026053f ("vfio/container: Switch to QOM")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
The Route information of the Linux VM needs to be used
by administrators and users when debugging network problems
and troubleshooting.
Signed-off-by: Dehan Meng <demeng@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-ID: <20240613092802.346246-2-demeng@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
target/arm: Use set_helper_retaddr for dc_zva, sve and sme
target/ppc: Tidy dcbz helpers
target/ppc: Use set_helper_retaddr for dcbz
target/s390x: Use set_helper_retaddr in mem_helper.c
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmafJKIdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+FBAf7Bup+karxeGHZx2rN
cPeF248bcCWTxBWHK7dsYze4KqzsrlNIJlPeOKErU2bbbRDZGhOp1/N95WVz+P8V
6Ny63WTsAYkaFWKxE6Jf0FWJlGw92btk75pTV2x/TNZixg7jg0vzVaYkk0lTYc5T
m5e4WycYEbzYm0uodxI09i+wFvpd+7WCnl6xWtlJPWZENukvJ36Ss43egFMDtuMk
vTJuBkS9wpwZ9MSi6EY6M+Raieg8bfaotInZeDvE/yRPNi7CwrA7Dgyc1y626uBA
joGkYRLzhRgvT19kB3bvFZi1AXa0Pxr+j0xJqwspP239Gq5qezlS5Bv/DrHdmGHA
jaqSwg==
=XgUE
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20240723' of https://gitlab.com/rth7680/qemu into staging
accel/tcg: Export set/clear_helper_retaddr
target/arm: Use set_helper_retaddr for dc_zva, sve and sme
target/ppc: Tidy dcbz helpers
target/ppc: Use set_helper_retaddr for dcbz
target/s390x: Use set_helper_retaddr in mem_helper.c
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmafJKIdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+FBAf7Bup+karxeGHZx2rN
# cPeF248bcCWTxBWHK7dsYze4KqzsrlNIJlPeOKErU2bbbRDZGhOp1/N95WVz+P8V
# 6Ny63WTsAYkaFWKxE6Jf0FWJlGw92btk75pTV2x/TNZixg7jg0vzVaYkk0lTYc5T
# m5e4WycYEbzYm0uodxI09i+wFvpd+7WCnl6xWtlJPWZENukvJ36Ss43egFMDtuMk
# vTJuBkS9wpwZ9MSi6EY6M+Raieg8bfaotInZeDvE/yRPNi7CwrA7Dgyc1y626uBA
# joGkYRLzhRgvT19kB3bvFZi1AXa0Pxr+j0xJqwspP239Gq5qezlS5Bv/DrHdmGHA
# jaqSwg==
# =XgUE
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 Jul 2024 01:33:54 PM AEST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-tcg-20240723' of https://gitlab.com/rth7680/qemu:
target/riscv: Simplify probing in vext_ldff
target/s390x: Use set/clear_helper_retaddr in mem_helper.c
target/s390x: Use user_or_likely in access_memmove
target/s390x: Use user_or_likely in do_access_memset
target/ppc: Improve helper_dcbz for user-only
target/ppc: Merge helper_{dcbz,dcbzep}
target/ppc: Split out helper_dbczl for 970
target/ppc: Hoist dcbz_size out of dcbz_common
target/ppc/mem_helper.c: Remove a conditional from dcbz_common()
target/arm: Use set/clear_helper_retaddr in SVE and SME helpers
target/arm: Use set/clear_helper_retaddr in helper-a64.c
accel/tcg: Move {set,clear}_helper_retaddr to cpu_ldst.h
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The current pairing of tlb_vaddr_to_host with extra is either
inefficient (user-only, with page_check_range) or incorrect
(system, with probe_pages).
For proper non-fault behaviour, use probe_access_flags with
its nonfault parameter set to true.
Reviewed-by: Max Chou <max.chou@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Avoid a race condition with munmap in another thread.
For access_memset and access_memmove, manage the value
within the helper. For uses of access_{get,set}_byte,
manage the value across the for loops.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Invert the conditional, indent the block, and use the macro
that expands to true for user-only.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Eliminate the ifdef by using a predicate that is
always true with CONFIG_USER_ONLY.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Mark the reserve_addr check unlikely. Use tlb_vaddr_to_host
instead of probe_write, relying on the memset itself to test
for page writability. Use set/clear_helper_retaddr so that
we can properly unwind on segfault.
With this, a trivial loop around guest memset will no longer
spend nearly 25% of runtime within page_get_flags.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge the two and pass the mmu_idx directly from translation.
Swap the argument order in dcbz_common to avoid extra swaps.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can determine at translation time whether the insn is or
is not dbczl. We must retain a runtime check against the
HID5 register, but we can move that to a separate function
that never affects other ppc models.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The 970 logic does not apply to dcbzep, which is an e500 insn.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of passing a bool and select a value within dcbz_common() let
the callers pass in the right value to avoid this conditional
statement. On PPC dcbz is often used to zero memory and some code uses
it a lot. This change improves the run time of a test case that copies
memory with a dcbz call in every iteration from 6.23 to 5.83 seconds.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20240622204833.5F7C74E6000@zero.eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Avoid a race condition with munmap in another thread.
Use around blocks that exclusively use "host_fn".
Keep the blocks as small as possible, but without setting
and clearing for every operation on one page.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use these in helper_dc_dva and the FEAT_MOPS routines to
avoid a race condition with munmap in another thread.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use of these in helpers goes hand-in-hand with tlb_vaddr_to_host
and other probing functions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Setup Data Object Exchange (DOE) as an extended capability for the NVME
controller and connect SPDM to it (CMA) to it.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20240703092027.644758-4-alistair.francis@wdc.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
SPDM enables authentication, attestation and key exchange to assist in
providing infrastructure security enablement. It's a standard published
by the DMTF [1].
SPDM supports multiple transports, including PCIe DOE and MCTP.
This patch adds support to QEMU to connect to an external SPDM
instance.
SPDM support can be added to any QEMU device by exposing a
TCP socket to a SPDM server. The server can then implement the SPDM
decoding/encoding support, generally using libspdm [2].
This is similar to how the current TPM implementation works and means
that the heavy lifting of setting up certificate chains, capabilities,
measurements and complex crypto can be done outside QEMU by a well
supported and tested library.
1: https://www.dmtf.org/standards/SPDM
2: https://github.com/DMTF/libspdm
Signed-off-by: Huai-Cheng Kuo <hchkuo@avery-design.com.tw>
Signed-off-by: Chris Browy <cbrowy@avery-design.com>
Co-developed-by: Jonathan Cameron <Jonathan.cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[ Changes by WM
- Bug fixes from testing
]
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
[ Changes by AF:
- Convert to be more QEMU-ified
- Move to backends as it isn't PCIe specific
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20240703092027.644758-3-alistair.francis@wdc.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add all of the defined protocols/features from the PCIe-SIG r6.0
"Table 6-32 PCI-SIG defined Data Object Types (Vendor ID = 0001h)"
table.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Message-Id: <20240703092027.644758-2-alistair.francis@wdc.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As per the step 5 in the process documented in bios-tables-test.c,
generate the expected ACPI AML data files for RISC-V using the
rebuild-expected-aml.sh script and update the
bios-tables-test-allowed-diff.h.
These are all new files being added for the first time. Hence, iASL diff
output is not added.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716144306.2432257-10-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add basic ACPI table test case for RISC-V.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716144306.2432257-9-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As per process documented (steps 1-3) in bios-tables-test.c, add empty
AML data files for RISC-V ACPI tables and add the entries in
bios-tables-test-allowed-diff.h.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716144306.2432257-8-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The expected ACPI AML files are moved now under ${arch}/{machine} path.
Hence, there is no need to search in old path which didn't have ${arch}.
Remove the code which searches for the expected AML files under old path
as well.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716144306.2432257-7-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
After PCI link devices are moved out of the scope of PCI root complex,
the DSDT files of machines which use GPEX, will change. So, update the
expected AML files with these changes for these machines.
Mainly, there are 2 changes.
1) Since the link devices are created now directly under _SB for all PCI
root bridges in the system, they should have unique names. So, instead
of GSIx, named those devices as LXXY where L means link, XX will have
PCI bus number and Y will have the INTx number (ex: L000 or L001). The
_PRT entries will also be updated to reflect this name change.
2) PCI link devices are moved from the scope of each PCI root bridge to
directly under _SB.
Below is the sample iASL difference for one such link device.
Scope (\_SB)
{
Name (_HID, "LNRO0005") // _HID: Hardware ID
Name (_UID, 0x1F) // _UID: Unique ID
Name (_CCA, One) // _CCA: Cache Coherency Attribute
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
Memory32Fixed (ReadWrite,
0x0A003E00, // Address Base
0x00000200, // Address Length
)
Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
{
0x0000004F,
}
})
+ Device (L000)
+ {
+ Name (_HID, "PNP0C0F" /* PCI Interrupt Link Device */)
+ Name (_UID, Zero) // _UID: Unique ID
+ Name (_PRS, ResourceTemplate ()
+ {
+ Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
+ {
+ 0x00000023,
+ }
+ })
+ Name (_CRS, ResourceTemplate ()
+ {
+ Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
+ {
+ 0x00000023,
+ }
+ })
+ Method (_SRS, 1, NotSerialized) // _SRS: Set Resource Settings
+ {
+ }
+ }
+
Device (PCI0)
{
Name (_HID, "PNP0A08" /* PCI Express Bus */) // _HID: Hardware ID
Name (_CID, "PNP0A03" /* PCI Bus */) // _CID: Compatible ID
Name (_SEG, Zero) // _SEG: PCI Segment
Name (_BBN, Zero) // _BBN: BIOS Bus Number
Name (_UID, Zero) // _UID: Unique ID
Name (_STR, Unicode ("PCIe 0 Device")) // _STR: Description String
Name (_CCA, One) // _CCA: Cache Coherency Attribute
Name (_PRT, Package (0x80) // _PRT: PCI Routing Table
{
Package (0x04)
{
0xFFFF,
Zero,
- GSI0,
+ L000,
Zero
},
.....
})
Device (GSI0)
{
Name (_HID, "PNP0C0F" /* PCI Interrupt Link Device */)
Name (_UID, Zero) // _UID: Unique ID
Name (_PRS, ResourceTemplate ()
{
Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
{
0x00000023,
}
})
Name (_CRS, ResourceTemplate ()
{
Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
{
0x00000023,
}
})
Method (_SRS, 1, NotSerialized) // _SRS: Set Resource Settings
{
}
}
}
}
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Message-Id: <20240716144306.2432257-6-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, PCI link devices (PNP0C0F) are always created within the
scope of the PCI root bridge. However, RISC-V needs these link devices
to be created outside to ensure the probing order in the OS. This
matches the example given in the ACPI specification [1] as well. Hence,
create these link devices directly under _SB instead of under the PCI
root bridge.
To keep these link device names unique for multiple PCI bridges, change
the device name from GSIx to LXXY format where XX is the PCI bus number
and Y is the INTx.
GPEX is currently used by riscv, aarch64/virt and x86/microvm machines.
So, this change will alter the DSDT for those systems.
[1] - ACPI 5.1: 6.2.13.1 Example: Using _PRT to Describe PCI IRQ Routing
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716144306.2432257-5-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
so that CI tests don't fail when those ACPI tables are updated in the
next patch. This is as per the documentation in bios-tables-tests.c.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716144306.2432257-4-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stacey Son