-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcdpBIAAoJENSXKoln91plXDcH/377ByoCFuKu0uYN0f8m3eJ5
wCwOrcwExM36vga/zaMCkkj44TbrzpNtjeo/frBn+8pabFDpfF6NOXlBSC+CE/hg
i3G4Wm09GeNOyPH9JIdvItE1LvL3EEOf10pbheNdv6PeuFPRnUAV4pyQ/Rcu9USC
7pAwIJvR3GYXAEhsqa8sKbbuCBq1oiFXWpsEuBNwybWKgdVEpia6IJVYDi+xwnVc
FcpMF7BAqZDIX13kCSIgOAaa/XCKRFgxUYnZMd3bwD9m+x3iC442eS7Idx/HyXXK
5HDeyubff8bMKBzTUWFuM1J8t0uuQsRDqR61WptQ0rxf5Qf9Uiv9OcAww+LIENI=
=9h9l
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-feb-27-2019' into staging
MIPS queue for February 27th, 2019
# gpg: Signature made Wed 27 Feb 2019 13:27:36 GMT
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-feb-27-2019:
target/mips: Preparing for adding MMI instructions
tests/tcg: target/mips: Add tests for MSA integer max/min instructions
tests/tcg: target/mips: Add wrappers for MSA integer max/min instructions
qemu-doc: Add section on MIPS' Boston board
qemu-doc: Add section on MIPS' Fulong 2E board
qemu-doc: Move section on MIPS' mipssim pseudo board
disas: nanoMIPS: Fix a function misnomer
tests/tcg: target/mips: Add tests for MSA integer compare instructions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Next set of patches for ppc and spapr. There's a lot in this one:
* Support "STOP light" states on POWER9
* Add support for HVI interrupts on POWER9 (powernv machine)
* CVE-2019-8934: Don't leak host model and serial information to the guest
* Tests and cleanups for various hot unplug options
* Hash and radix MMU implementation on POWER9 for powernv machine
* PCI Host Bridge hotplug support for pseries machine
* Allow larger kernels and initrds for powernv machine
Plus a handful of miscellaneous fixes and cleanups.
The cpu hotplug tests and cleanups from David Hildenbrand aren't
solely power related. However the consensus amongst Michael Tsirkin,
David Hildenbrand, Cornelia Huck and myself was that it made most
sense to come in via my tree.
-----BEGIN PGP SIGNATURE-----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=Z4Z6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.0-20190226' into staging
ppc patch queue 2019-02-26
Next set of patches for ppc and spapr. There's a lot in this one:
* Support "STOP light" states on POWER9
* Add support for HVI interrupts on POWER9 (powernv machine)
* CVE-2019-8934: Don't leak host model and serial information to the guest
* Tests and cleanups for various hot unplug options
* Hash and radix MMU implementation on POWER9 for powernv machine
* PCI Host Bridge hotplug support for pseries machine
* Allow larger kernels and initrds for powernv machine
Plus a handful of miscellaneous fixes and cleanups.
The cpu hotplug tests and cleanups from David Hildenbrand aren't
solely power related. However the consensus amongst Michael Tsirkin,
David Hildenbrand, Cornelia Huck and myself was that it made most
sense to come in via my tree.
# gpg: Signature made Tue 26 Feb 2019 03:37:46 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.0-20190226: (50 commits)
ppc/pnv: use IEC binary prefixes to represent sizes
ppc/pnv: add INITRD_MAX_SIZE constant
ppc/pnv: increase kernel size limit to 256MiB
hw/ppc: Use object_initialize_child for correct reference counting
ppc/xive: xive does not have a POWER7 interrupt model
tests/device-plug: Add PHB unplug request test for spapr
spapr: enable PHB hotplug for default pseries machine type
spapr: add hotplug hooks for PHB hotplug
spapr_pci: add ibm, my-drc-index property for PHB hotplug
spapr_pci: provide node start offset via spapr_populate_pci_dt()
spapr_events: add support for phb hotplug events
spapr: populate PHB DRC entries for root DT node
spapr: create DR connectors for PHBs
spapr_pci: add PHB unrealize
spapr_irq: Expose the phandle of the interrupt controller
spapr: Expose the name of the interrupt controller node
xics: Write source state to KVM at claim time
spapr/drc: Drop spapr_drc_attach() fdt argument
spapr/pci: Generate FDT fragment at configure connector time
spapr: Generate FDT fragment for CPUs at configure connector time
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add tests for MSA integer max/min instructions. This includes
following instructions:
* MAX_A.B - maximum of absolute of two signed values (bytes)
* MAX_A.H - maximum of absolute of two signed values (halfwords)
* MAX_A.W - maximum of absolute of two signed values (words)
* MAX_A.D - maximum of absolute of two signed values (doublewords)
* MIN_A.B - minimum of absolute of two signed values (bytes)
* MIN_A.H - minimum of absolute of two signed values (halfwords)
* MIN_A.W - minimum of absolute of two signed values (words)
* MIN_A.D - minimum of absolute of two signed values (doublewords)
* MAX_S.B - maximum of two signed values (bytes)
* MAX_S.H - maximum of two signed values (halfwords)
* MAX_S.W - maximum of two signed values (words)
* MAX_S.D - maximum of two signed values (doublewords)
* MIN_S.B - minimum of two signed values (bytes)
* MIN_S.H - minimum of two signed values (halfwords)
* MIN_S.W - minimum of two signed values (words)
* MIN_S.D - minimum of two signed values (doublewords)
* MAX_U.B - maximum of two unsigned values (bytes)
* MAX_U.H - maximum of two unsigned values (halfwords)
* MAX_U.W - maximum of two unsigned values (words)
* MAX_U.D - maximum of two unsigned values (doublewords)
* MIN_U.B - minimum of two unsigned values (bytes)
* MIN_U.H - minimum of two unsigned values (halfwords)
* MIN_U.W - minimum of two unsigned values (words)
* MIN_U.D - minimum of two unsigned values (doublewords)
Each test consists of 80 test cases, so altogether there are 1920
test cases.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551185735-17154-8-git-send-email-aleksandar.markovic@rt-rk.com>
Add tests for MSA integer compare instructions. This includes
following instructions:
* CEQ.B - integer compare equal (bytes)
* CEQ.H - integer compare equal (halfwords)
* CEQ.W - integer compare equal (words)
* CEQ.D - integer compare equal (doublewords)
* CLE_S.B - signed integer compare less or equal (bytes)
* CLE_S.H - signed integer compare less or equal (halfwords)
* CLE_S.W - signed integer compare less or equal (words)
* CLE_S.D - signed integer compare less or equal (doublewords)
* CLE_U.B - unsigned integer compare less or equal (bytes)
* CLE_U.H - unsigned integer compare less or equal (halfwords)
* CLE_U.W - unsigned integer compare less or equal (words)
* CLE_U.D - unsigned integer compare less or equal (doublewords)
* CLT_S.B - signed integer compare less or equal (bytes)
* CLT_S.H - signed integer compare less or equal (halfwords)
* CLT_S.W - signed integer compare less or equal (words)
* CLT_S.D - signed integer compare less or equal (doublewords)
* CLT_U.B - unsigned integer compare less or equal (bytes)
* CLT_U.H - unsigned integer compare less or equal (halfwords)
* CLT_U.W - unsigned integer compare less or equal (words)
* CLT_U.D - unsigned integer compare less or equal (doublewords)
Each test consists of 80 test cases, so altogether there are 1600 test
cases.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551185735-17154-2-git-send-email-aleksandar.markovic@rt-rk.com>
- Block graph change fixes (avoid loops, cope with non-tree graphs)
- bdrv_set_aio_context() related fixes
- HMP snapshot commands: Use only tag, not the ID to identify snapshots
- qmeu-img, commit: Error path fixes
- block/nvme: Build fix for gcc 9
- MAINTAINERS updates
- Fix various issues with bdrv_refresh_filename()
- Fix various iotests
- Include LUKS overhead in qemu-img measure for qcow2
- A fix for vmdk's image creation interface
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJcc/knAAoJEH8JsnLIjy/WptQP/3F8Lh52H4egXaP7NUUuDjQM
AhqhuDAp/EZBS+xim9kLTogNJADe/rMWdSX/YB5aLpSPYbjasC66NgaLhd6QewgQ
VIcsLUdlYAyZ5ZjJytimfMTLwm1X02RmVIe55y52DTY8LlfViZzOlf3qwqPm00ao
EJB2cl8UJLM+PVEu59cCw3R0/06LY+WIJRB32d3tnCBRTkaJwfR9h4lrp/juVcFZ
U+2eWU68KMbUHSYiWANowN+KRV3uPY4HVA98v3F0vDmcBxlVHOeBg6S+PcT7tK8p
huzCMwcdwUyPMJgVs/+WBtUnbG0jN6SHUYmFLz859UMVgBnCw5tzBMf8qw1wOA4A
Iw+zor27Pxj4IlxcLPp5f97YZ8k9acdMR2VKPH6xLJZ1JF+sKa54RfzESd5EJeIj
Mfcp773H0lIaWcFJ6RY1F0L1E1ta7QigwNBiWMdYfh0a0EWHnDvGyYeaSPYEQ+rl
e8bZOcfrYwVI7DTDiZOIkGA9D8DXEPDNp+sl6s1DxeY69D0NNaXTtCPqFNNAbFbd
20uD7yDRZlWq32cQB/K9D5cSkZRSOzdUpLfLU3nQU2+dz11x6OpM6m7DVboSrztD
1HtPPDzDEvH5dOP7ibd60s+ntjkSiNfNkUgnuVrBE/d/PocC1eHHpZt5V7f43Ofb
RxVwH5+smzQ9nsNBfQR0
=gaah
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Block graph change fixes (avoid loops, cope with non-tree graphs)
- bdrv_set_aio_context() related fixes
- HMP snapshot commands: Use only tag, not the ID to identify snapshots
- qmeu-img, commit: Error path fixes
- block/nvme: Build fix for gcc 9
- MAINTAINERS updates
- Fix various issues with bdrv_refresh_filename()
- Fix various iotests
- Include LUKS overhead in qemu-img measure for qcow2
- A fix for vmdk's image creation interface
# gpg: Signature made Mon 25 Feb 2019 14:18:15 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (71 commits)
iotests: Skip 211 on insufficient memory
vmdk: false positive of compat6 with hwversion not set
iotests: add LUKS payload overhead to 178 qemu-img measure test
qcow2: include LUKS payload overhead in qemu-img measure
iotests.py: s/_/-/g on keys in qmp_log()
iotests: Let 045 be run concurrently
iotests: Filter SSH paths
iotests.py: Filter filename in any string value
iotests.py: Add is_str()
iotests: Fix 207 to use QMP filters for qmp_log
iotests: Fix 232 for LUKS
iotests: Remove superfluous rm from 232
iotests: Fix 237 for Python 2.x
iotests: Re-add filename filters
iotests: Test json:{} filenames of internal BDSs
block: BDS options may lack the "driver" option
block/null: Generate filename even with latency-ns
block/curl: Implement bdrv_refresh_filename()
block/curl: Harmonize option defaults
block/nvme: Fix bdrv_refresh_filename()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we run "certtool 2>&1 | head -1" the latter command is likely to
complete and exit before certtool has written everything it wants to
stderr. In at least the RHEL-7 gnutls 3.3.29 this causes certtool to
quit with broken pipe before it has finished writing the desired
output file to disk. This causes non-deterministic failures of the
iotest 233 because the certs are sometimes zero length files.
If certtool fails the "head -1" means we also lose any useful error
message it would have printed.
Thus this patch gets rid of the pipe and post-processes the output in a
more flexible & reliable manner.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190220145819.30969-3-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
If we abort the iotest early the server.log file might contain useful
information for diagnosing the problem. Ensure its contents are
displayed in this case.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190220145819.30969-2-berrange@redhat.com>
[eblake: fix shell quoting]
Signed-off-by: Eric Blake <eblake@redhat.com>
The data type for bytes in Python 3 differs from the one in Python 2.
The type cast that is compatible with both versions was applied.
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reported-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1551197495-24425-1-git-send-email-andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The 'qemu_acl' type was a previous non-QOM based attempt to provide an
authorization facility in QEMU. Because it is non-QOM based it cannot be
created via the command line and requires special monitor commands to
manipulate it.
The new QAuthZ subclasses provide a superset of the functionality in
qemu_acl, so the latter can now be deleted. The HMP 'acl_*' monitor
commands are converted to use the new QAuthZSimple data type instead
in order to provide temporary backwards compatibility.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add an authorization backend that talks to PAM to check whether the user
identity is allowed. This only uses the PAM account validation facility,
which is essentially just a check to see if the provided username is permitted
access. It doesn't use the authentication or session parts of PAM, since
that's dealt with by the relevant part of QEMU (eg VNC server).
Consider starting QEMU with a VNC server and telling it to use TLS with
x509 client certificates and configuring it to use an PAM to validate
the x509 distinguished name. In this example we're telling it to use PAM
for the QAuthZ impl with a service name of "qemu-vnc"
$ qemu-system-x86_64 \
-object tls-creds-x509,id=tls0,dir=/home/berrange/security/qemutls,\
endpoint=server,verify-peer=yes \
-object authz-pam,id=authz0,service=qemu-vnc \
-vnc :1,tls-creds=tls0,tls-authz=authz0
This requires an /etc/pam/qemu-vnc file to be created with the auth
rules. A very simple file based whitelist can be setup using
$ cat > /etc/pam/qemu-vnc <<EOF
account requisite pam_listfile.so item=user sense=allow file=/etc/qemu/vnc.allow
EOF
The /etc/qemu/vnc.allow file simply contains one username per line. Any
username not in the file is denied. The usernames in this example are
the x509 distinguished name from the client's x509 cert.
$ cat > /etc/qemu/vnc.allow <<EOF
CN=laptop.berrange.com,O=Berrange Home,L=London,ST=London,C=GB
EOF
More interesting would be to configure PAM to use an LDAP backend, so
that the QEMU authorization check data can be centralized instead of
requiring each compute host to have file maintained.
The main limitation with this PAM module is that the rules apply to all
QEMU instances on the host. Setting up different rules per VM, would
require creating a separate PAM service name & config file for every
guest. An alternative approach for the future might be to not pass in
the plain username to PAM, but instead combine the VM name or UUID with
the username. This requires further consideration though.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a QAuthZListFile object type that implements the QAuthZ interface. This
built-in implementation is a proxy around the QAuthZList object type,
initializing it from an external file, and optionally, automatically
reloading it whenever it changes.
To create an instance of this object via the QMP monitor, the syntax
used would be:
{
"execute": "object-add",
"arguments": {
"qom-type": "authz-list-file",
"id": "authz0",
"props": {
"filename": "/etc/qemu/vnc.acl",
"refresh": true
}
}
}
If "refresh" is "yes", inotify is used to monitor the file,
automatically reloading changes. If an error occurs during reloading,
all authorizations will fail until the file is next successfully
loaded.
The /etc/qemu/vnc.acl file would contain a JSON representation of a
QAuthZList object
{
"rules": [
{ "match": "fred", "policy": "allow", "format": "exact" },
{ "match": "bob", "policy": "allow", "format": "exact" },
{ "match": "danb", "policy": "deny", "format": "glob" },
{ "match": "dan*", "policy": "allow", "format": "exact" },
],
"policy": "deny"
}
This sets up an authorization rule that allows 'fred', 'bob' and anyone
whose name starts with 'dan', except for 'danb'. Everyone unmatched is
denied.
The object can be loaded on the comand line using
-object authz-list-file,id=authz0,filename=/etc/qemu/vnc.acl,refresh=yes
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add a QAuthZList object type that implements the QAuthZ interface. This
built-in implementation maintains a trivial access control list with a
sequence of match rules and a final default policy. This replicates the
functionality currently provided by the qemu_acl module.
To create an instance of this object via the QMP monitor, the syntax
used would be:
{
"execute": "object-add",
"arguments": {
"qom-type": "authz-list",
"id": "authz0",
"props": {
"rules": [
{ "match": "fred", "policy": "allow", "format": "exact" },
{ "match": "bob", "policy": "allow", "format": "exact" },
{ "match": "danb", "policy": "deny", "format": "glob" },
{ "match": "dan*", "policy": "allow", "format": "exact" },
],
"policy": "deny"
}
}
}
This sets up an authorization rule that allows 'fred', 'bob' and anyone
whose name starts with 'dan', except for 'danb'. Everyone unmatched is
denied.
It is not currently possible to create this via -object, since there is
no syntax supported to specify non-scalar properties for objects. This
is likely to be addressed by later support for using JSON with -object,
or an equivalent approach.
In any case the future "authz-listfile" object can be used from the
CLI and is likely a better choice, as it allows the ACL to be refreshed
automatically on change.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In many cases a single VM will just need to whitelist a single identity
as the allowed user of network services. This is especially the case for
TLS live migration (optionally with NBD storage) where we just need to
whitelist the x509 certificate distinguished name of the source QEMU
host.
Via QMP this can be configured with:
{
"execute": "object-add",
"arguments": {
"qom-type": "authz-simple",
"id": "authz0",
"props": {
"identity": "fred"
}
}
}
Or via the command line
-object authz-simple,id=authz0,identity=fred
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The inotify userspace API for reading events is quite horrible, so it is
useful to wrap it in a more friendly API to avoid duplicating code
across many users in QEMU. Wrapping it also allows introduction of a
platform portability layer, so that we can add impls for non-Linux based
equivalents in future.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We missed a bug in a recent patch as we were not testing all the
rounding modes for all operations. However enabling all rounding modes
for mulAdd does slow down the already slowest test and doesn't really
buy us much additional coverage so lets allow the default test flags
to be overridden.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Previously this was only supported for roundAndPackFloat64.
New support in round_canonical, round_to_int, float128_round_to_int,
roundAndPackFloat32, roundAndPackInt32, roundAndPackInt64,
roundAndPackUint64. This does not include any of the floatx80 routines,
as we do not have users for that rounding mode there.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190215170225.15537-1-richard.henderson@linaro.org>
Tested-by: David Hildenbrand <david@redhat.com>
[AJB: add missing break]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We've just added f128_to_ui32 and we missed out the f128_to_ui64 tests
last time.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Needed to test: softfloat: Implement float128_to_uint32
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Commit 2cade3d wired up new tests, but did not exclude the
new *.out files produced by running the tests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We can easily test this, just like PCI. PHB unplug is not supported
on s390x and x86 ACPI.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155059673939.1466090.14354001937819612724.stgit@bahia.lab.toulouse-stg.fr.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We can easily test this, just like PCI. On x86 ACPI, we need guest
interaction to make it work, so it is not that easy to test. We might
add tests for that later on.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190218092202.26683-7-david@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We can easily test this, just like PCI. On s390x, cpu unplug is not
supported. On x86 ACPI, cpu unplug requires guest interaction to work, so
it can't be tested that easily. We might add tests for ACPI later.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190218092202.26683-6-david@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As CCW unplugs are surprise removals without asking the guest first,
we can test this without any guest interaction.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190218092202.26683-5-david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The issue with testing asynchronous unplug requests it that they usually
require a running guest to handle the request. However, to test if
unplug of PCI devices works, we can apply a nice little trick on some
architectures:
On system reset, x86 ACPI, s390x and spapr will perform the unplug,
resulting in the device of interest to get deleted and a DEVICE_DELETED
event getting sent.
On s390x, we still get a warning
qemu-system-s390x: -device virtio-mouse-pci,id=dev0:
warning: Plugging a PCI/zPCI device without the 'zpci' CPU feature
enabled; the guest will not be able to see/use this device
This will be fixed soon, when we enable the zpci CPU feature always
(Conny already has a patch for this queued).
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190218092202.26683-4-david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJccAIFAAoJEJykq7OBq3PImM0IAMcC92GYwSL6MgQ4NrfbVfDQ
P+qgIoxlXcYNwa12kGY6rE4tgSDab9Mc5ACpmuFdr8Xj7/JOp97AccmKZ+RzYQSj
IFlkvd8GngQR1YnFGV6PIWSt7hRhKuUZMqSIDrWro/MTdiJFEMI8/e7QLGxmaEX1
gWCNSopxJUeACSJiRyfZvBGNCs23R9ptFKBFhIXS98KPtEtF8LQV0JnQXoRUDiBL
G9C/xggdGDvct3Id4yOBCh43ErssyOrlYwjzIRWB2AFfIwHGytJcL6JBjAqy4Z7M
ClMNXaQSbfSCXrc3osF9nO6KaFduhfpUH44lL5JBHxUgH6pN2xGradRANZwysQM=
=DSBn
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Pull request
# gpg: Signature made Fri 22 Feb 2019 14:07:01 GMT
# gpg: using RSA key 9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request: (27 commits)
tests/virtio-blk: add test for DISCARD command
tests/virtio-blk: add test for WRITE_ZEROES command
tests/virtio-blk: add virtio_blk_fix_dwz_hdr() function
tests/virtio-blk: change assert on data_size in virtio_blk_request()
virtio-blk: add DISCARD and WRITE_ZEROES features
virtio-blk: set config size depending on the features enabled
virtio-net: make VirtIOFeature usable for other virtio devices
virtio-blk: add "discard" and "write-zeroes" properties
virtio-blk: add host_features field in VirtIOBlock
virtio-blk: add acct_failed param to virtio_blk_handle_rw_error()
hw/ide: drop iov field from IDEDMA
hw/ide: drop iov field from IDEBufferedRequest
hw/ide: drop iov field from IDEState
tests/test-bdrv-drain: use QEMU_IOVEC_INIT_BUF
migration/block: use qemu_iovec_init_buf
qemu-img: use qemu_iovec_init_buf
block/vmdk: use qemu_iovec_init_buf
block/qed: use qemu_iovec_init_buf
block/qcow2: use qemu_iovec_init_buf
block/qcow: use qemu_iovec_init_buf
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
VDI keeps the whole bitmap in memory, and the maximum size (which is
tested here) is 2 GB. This may not be available on all machines, and it
rarely is available when running a 32 bit build.
Fix this by making VM.run_job() return the error string if an error
occurred, and checking whether that contains "Could not allocate bmap"
in 211. If so, the test is skipped.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190218180646.30282-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The previous patch includes the LUKS payload overhead into the qemu-img
measure calculation for qcow2. Update qemu-iotests 178 to exercise this
new code path.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190218104525.23674-3-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This follows what qmp() does, so the output will correspond to the
actual QMP command.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190210145736.1486-11-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Adding a telnet monitor for no real purpose on a fixed port is not so
great. Just use a null monitor instead.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190210145736.1486-10-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
8908b253c4 has implemented filtering of
remote paths for NFS, but forgot SSH. This patch takes care of that.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190210145736.1486-9-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
filter_qmp_testfiles() currently filters the filename only for specific
keys. However, there are more keys that take filenames (such as
block-commit's @top and @base, or ssh's @path), and it does not make
sense to list them all here. "$TEST_DIR/$PID-" should have enough
entropy not to appear anywhere randomly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190210145736.1486-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
On Python 2.x, strings are not always unicode strings. This function
checks whether a given value is a plain string, or a unicode string (if
there is a difference).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190210145736.1486-7-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
With IMGOPTSSYNTAX, $TEST_IMG is useless for this test (it only tests
the file-posix protocol driver). Therefore, if $TEST_IMG_FILE is set,
use that instead.
Because this test requires the file protocol, $TEST_IMG_FILE will always
be set if $IMGOPTSSYNTAX is true.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190210145736.1486-5-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This test creates no such file.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190210145736.1486-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
math.ceil() returns an integer on Python 3.x, but a float on Python 2.x.
range() always needs integers, so we need an explicit conversion on 2.x
(which does not hurt on 3.x).
It is not quite clear whether we want to support Python 2.x for any
prolonged time, but this may as well be fixed along with the other
issues some iotests have right now.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190210145736.1486-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
A previous commit removed the default filters for qmp_log with the
intention to make them explicit; but this happened only for test 206.
There are more tests (for more exotic image formats than qcow2) which
require the filename filter, though.
Note that 237 is still broken for Python 2.x, which is fixed in the next
commit.
Fixes: f8ca8609d8
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190210145736.1486-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently, BlockDriver.bdrv_refresh_filename() is supposed to both
refresh the filename (BDS.exact_filename) and set BDS.full_open_options.
Now that we have generic code in the central bdrv_refresh_filename() for
creating BDS.full_open_options, we can drop the latter part from all
BlockDriver.bdrv_refresh_filename() implementations.
This also means that we can drop all of the existing default code for
this from the global bdrv_refresh_filename() itself.
Furthermore, we now have to call BlockDriver.bdrv_refresh_filename()
after having set BDS.full_open_options, because the block driver's
implementation should now be allowed to depend on BDS.full_open_options
being set correctly.
Finally, with this patch we can drop the @options parameter from
BlockDriver.bdrv_refresh_filename(); also, add a comment on this
function's purpose in block/block_int.h while touching its interface.
This completely obsoletes blklogwrite's implementation of
.bdrv_refresh_filename().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190201192935.18394-25-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Instead of having every block driver which implements
bdrv_refresh_filename() copy all of the strong runtime options over to
bs->full_open_options, implement this process generically in
bdrv_refresh_filename().
This patch only adds this new generic implementation, it does not remove
the old functionality. This is done in a follow-up patch.
With this patch, some superfluous information (that should never have
been there) may be removed from some JSON filenames, as can be seen in
the change to iotests 110's and 228's reference outputs.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190201192935.18394-24-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Test 110 tests relative backing filenames for complex BDS trees. Now
that the originally supposedly failing test passes, let us add a new
failing test: Quorum can never work automatically (without detecting
whether all child nodes have the same base directory, but that would be
rather inconsistent behavior).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190201192935.18394-21-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_get_full_backing_filename_from_filename() breaks down when it comes
to JSON filenames. Using bdrv_dirname() as the basis is better because
since we have BDS, we can descend through the BDS tree to the protocol
layer, which gives us a greater probability of finding a non-JSON name;
also, bdrv_dirname() is more correct as it allows block drivers to
override the generation of that directory name in a protocol-specific
way.
We still need to keep bdrv_get_full_backing_filename_from_filename(),
though, because it has valid callers which need it during image creation
when no BDS is available yet.
This makes a test case in qemu-iotest 110, which was supposed to fail,
work. That is actually good, but we need to change the reference output
(and the comment in 110) accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190201192935.18394-20-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This function queries a node; since we cannot do that right now, it
executes query-named-block-nodes and returns the matching node's object.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20190201192935.18394-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190201192935.18394-7-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Basically, bdrv_refresh_filename() should respect all children of a
BlockDriverState. However, generally those children are driver-specific,
so this function cannot handle the general case. On the other hand,
there are only few drivers which use other children than @file and
@backing (that being vmdk, quorum, and blkverify).
Most block drivers only use @file and/or @backing (if they use any
children at all). Both can be implemented directly in
bdrv_refresh_filename.
The user overriding the file's filename is already handled, however, the
user overriding the backing file is not. If this is done, opening the
BDS with the plain filename of its file will not be correct, so we may
not set bs->exact_filename in that case.
iotest 051 contains test cases for overriding the backing file, and so
its output changes with this patch applied.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190201192935.18394-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Peter Maydell