Add back test-plugins and, after making sure it is always defined,
do so unconditionally.
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Fixes: 2c13c57441 ("configure, meson: move --enable-plugins to meson", 2023-09-07)
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When we sent a page through QEMUFile hooks (RDMA) there are three
posiblities:
- We are not using RDMA. return RAM_SAVE_CONTROL_DELAYED and
control_save_page() returns false to let anything else to proceed.
- There is one error but we are using RDMA. Then we return a negative
value, control_save_page() needs to return true.
- Everything goes well and RDMA start the sent of the page
asynchronously. It returns RAM_SAVE_CONTROL_DELAYED and we need to
return 1 for ram_save_page_legacy.
Clear?
I know, I know, the interface is as bad as it gets. I think that now
it is a bit clearer, but this needs to be done some other way.
Reviewed-by: Leonardo Bras <leobras@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515195709.63843-16-quintela@redhat.com>
After this change, nothing abuses QEMUFile to account for data
transferrefd during migration.
Reviewed-by: Leonardo Bras <leobras@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515195709.63843-15-quintela@redhat.com>
RDMA protocol is completely asynchronous, so in qemu_rdma_save_page()
they "invent" that a byte has been transferred. And then they call
qemu_file_credit_transfer() and ram_transferred_add() with that byte.
Just remove that calls as nothing has been sent.
Reviewed-by: Leonardo Bras <leobras@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515195709.63843-14-quintela@redhat.com>
Reviewed-by: Leonardo Bras <leobras@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515195709.63843-13-quintela@redhat.com>
Remove the one in control_save_page().
Reviewed-by: Leonardo Bras <leobras@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515195709.63843-12-quintela@redhat.com>
Just create a variable for it, the same way that multifd does. This
way it is safe to use for other thread, etc, etc.
Reviewed-by: Leonardo Bras <leobras@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515195709.63843-11-quintela@redhat.com>
We only care about the amount of bytes transferred. Flushing is done
by the system somewhere else.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230530183941.7223-4-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In the function qmp_migrate(), yank_unregister_instance() gets called
twice which isn't required. Hence, refactoring it so that it gets called
during the local_error cleanup.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Tejus GK <tejus.gk@nutanix.com>
Message-ID: <20230621130940.178659-3-tejus.gk@nutanix.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
So no need to assert we are in x86_64.
Once there, refactor the function to remove useless variables.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230608224943.3877-11-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The bootsector code is read only from the guest (otherwise we are
going to have problems with it being read from both source and
destination).
Create a single copy for all the tests.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230608224943.3877-10-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
So just make it a global variable.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230608224943.3877-9-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
So arch_dirty_ring option becomes one option like the others.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230608224943.3877-8-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Fix following warnings
.../disas/m68k.c: In function ‘print_insn_arg’:
.../disas/m68k.c:1635:13: warning: declaration of ‘val’ shadows a previous local [-Wshadow=compatible-local]
1635 | int val = fetch_arg (buffer, place, 5, info);
| ^~~
.../disas/m68k.c:1093:7: note: shadowed declaration is here
1093 | int val = 0;
| ^~~
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20230925084455.395150-1-laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix local variable shadowing in nvme_ns_init().
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Message-ID: <20230925-fix-local-shadowing-v1-1-3a1172132377@samsung.com>
Reviewed-by: Jesper Wendel Devantier <j.devantier@samsung.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Local variables shadowing other local variables or parameters make the
code needlessly hard to understand. Bugs love to hide in such code.
Evidence: "[PATCH v3 1/7] migration/rdma: Fix save_page method to fail
on polling error".
This patch removes the local variable shadowing. Tested by adding:
--extra-cflags='-Wshadow=local -Wno-error=shadow=local -Wno-error=shadow=compatible-local'
To configure
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925043023.71448-5-alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Local variables shadowing other local variables or parameters make the
code needlessly hard to understand. Bugs love to hide in such code.
Evidence: "[PATCH v3 1/7] migration/rdma: Fix save_page method to fail
on polling error".
This patch removes the local variable shadowing. Tested by adding:
--extra-cflags='-Wshadow=local -Wno-error=shadow=local -Wno-error=shadow=compatible-local'
To configure
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925043023.71448-4-alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Local variables shadowing other local variables or parameters make the
code needlessly hard to understand. Bugs love to hide in such code.
Evidence: "[PATCH v3 1/7] migration/rdma: Fix save_page method to fail
on polling error".
This patch removes the local variable shadowing. Tested by adding:
--extra-cflags='-Wshadow=local -Wno-error=shadow=local -Wno-error=shadow=compatible-local'
To configure
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925043023.71448-3-alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Local variables shadowing other local variables or parameters make the
code needlessly hard to understand. Bugs love to hide in such code.
Evidence: "[PATCH v3 1/7] migration/rdma: Fix save_page method to fail
on polling error".
This patch removes the local variable shadowing. Tested by adding:
--extra-cflags='-Wshadow=local -Wno-error=shadow=local -Wno-error=shadow=compatible-local'
To configure
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230925043023.71448-2-alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Address all compiler complaints from -Wshadow in qemu-nbd. Several
instances of 'int ret' became shadows when commit 4fbec260 added 'ret'
at a higher scope in main. More interesting was the 'void *ret'
capturing the result of a pthread; where we were conceptually doing
'(void*)(intptr_t)EXIT_FAILURE != NULL' which just feels wrong (even
though it happens to compile correctly), so it was worth a better
cleanup.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-ID: <20230922205019.2755352-2-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This is confusing as one 'action' variable is used for storing
a SCMP_ enum value, while the other 'action' variable is used
for storing a SECCOMP_ enum value.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20230922160644.438631-3-berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Both instances of 'ret' are used to store a gnutls API return code.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20230922160644.438631-2-berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This patch fixes the warning of shadowed local variable:
../hw/i386/intel_iommu.c: In function ‘vtd_address_space_unmap’:
../hw/i386/intel_iommu.c:3773:18: warning: declaration of ‘size’ shadows a previous local [-Wshadow=compatible-local]
3773 | uint64_t size = mask + 1;
| ^~~~
../hw/i386/intel_iommu.c:3747:12: note: shadowed declaration is here
3747 | hwaddr size, remain;
| ^~~~
Cc: Jason Wang <jasowang@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230922160410.138786-1-peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
commit 8137355e85 ("aspeed/timer: Fix behaviour running Linux")
introduced a MAX() expression to calculate the next timer deadline :
return calculate_time(t, MAX(MAX(t->match[0], t->match[1]), 0));
The second MAX() is not necessary since the compared values are an
unsigned and 0. Simply remove it and fix warning :
../hw/timer/aspeed_timer.c: In function ‘calculate_next’:
../include/qemu/osdep.h:396:31: warning: declaration of ‘_a’ shadows a previous local [-Wshadow=compatible-local]
396 | typeof(1 ? (a) : (b)) _a = (a), _b = (b); \
| ^~
../hw/timer/aspeed_timer.c:170:12: note: in expansion of macro ‘MAX’
170 | next = MAX(MAX(calculate_match(t, 0), calculate_match(t, 1)), 0);
| ^~~
../hw/timer/aspeed_timer.c:170:16: note: in expansion of macro ‘MAX’
170 | next = MAX(MAX(calculate_match(t, 0), calculate_match(t, 1)), 0);
| ^~~
/home/legoater/work/qemu/qemu-aspeed.git/include/qemu/osdep.h:396:31: note: shadowed declaration is here
396 | typeof(1 ? (a) : (b)) _a = (a), _b = (b); \
| ^~
../hw/timer/aspeed_timer.c:170:12: note: in expansion of macro ‘MAX’
170 | next = MAX(MAX(calculate_match(t, 0), calculate_match(t, 1)), 0);
| ^~~
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230922155924.1172019-5-clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Remove superfluous local 'irq' variables and use the one define at the
top of the routine. This fixes warnings in aspeed_soc_ast2600_realize()
such as :
../hw/arm/aspeed_ast2600.c: In function ‘aspeed_soc_ast2600_realize’:
../hw/arm/aspeed_ast2600.c:420:18: warning: declaration of ‘irq’ shadows a previous local [-Wshadow=compatible-local]
420 | qemu_irq irq = aspeed_soc_get_irq(s, ASPEED_DEV_TIMER1 + i);
| ^~~
../hw/arm/aspeed_ast2600.c:312:14: note: shadowed declaration is here
312 | qemu_irq irq;
| ^~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230922155924.1172019-3-clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Remove superfluous local 'data' variable and use the one define at the
top of the routine. This fixes :
../hw/i2c/aspeed_i2c.c: In function ‘aspeed_i2c_bus_recv’:
../hw/i2c/aspeed_i2c.c:315:17: warning: declaration of ‘data’ shadows a previous local [-Wshadow=compatible-local]
315 | uint8_t data;
| ^~~~
../hw/i2c/aspeed_i2c.c:288:13: note: shadowed declaration is here
288 | uint8_t data;
| ^~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230922155924.1172019-2-clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The STE_CTXPTR() and STE_S2TTB() macros both extract two halves
of an address from fields in the STE and combine them into a
single value to return. The current code for this uses a GCC
statement expression. There are two problems with this:
(1) The type chosen for the variable in the statement expr
is 'unsigned long', which might not be 64 bits
(2) the name chosen for the variable causes -Wshadow warnings
because it's the same as a variable in use at the callsite:
In file included from ../../hw/arm/smmuv3.c:34:
../../hw/arm/smmuv3.c: In function ‘smmu_get_cd’:
../../hw/arm/smmuv3-internal.h:538:23: warning: declaration of ‘addr’ shadows a previous local [-Wshadow=compatible-local]
538 | unsigned long addr; \
| ^~~~
../../hw/arm/smmuv3.c:339:23: note: in expansion of macro ‘STE_CTXPTR’
339 | dma_addr_t addr = STE_CTXPTR(ste);
| ^~~~~~~~~~
../../hw/arm/smmuv3.c:339:16: note: shadowed declaration is here
339 | dma_addr_t addr = STE_CTXPTR(ste);
| ^~~~
Sidestep both of these problems by just using a single
expression rather than a statement expr.
For CMD_ADDR, we got the type of the variable right but still
run into -Wshadow problems:
In file included from ../../hw/arm/smmuv3.c:34:
../../hw/arm/smmuv3.c: In function ‘smmuv3_range_inval’:
../../hw/arm/smmuv3-internal.h:334:22: warning: declaration of ‘addr’ shadows a previous local [-Wshadow=compatible-local]
334 | uint64_t addr = high << 32 | (low << 12); \
| ^~~~
../../hw/arm/smmuv3.c:1104:28: note: in expansion of macro ‘CMD_ADDR’
1104 | dma_addr_t end, addr = CMD_ADDR(cmd);
| ^~~~~~~~
../../hw/arm/smmuv3.c:1104:21: note: shadowed declaration is here
1104 | dma_addr_t end, addr = CMD_ADDR(cmd);
| ^~~~
so convert it too.
CD_TTB has neither problem, but it is the only other macro in
the file that uses this pattern, so we convert it also for
consistency's sake.
We use extract64() rather than extract32() to avoid having
to explicitly cast the result to uint64_t.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20230922152944.3583438-5-peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Avoid shadowing a variable in smmuv3_notify_iova():
../../hw/arm/smmuv3.c: In function ‘smmuv3_notify_iova’:
../../hw/arm/smmuv3.c:1043:23: warning: declaration of ‘event’ shadows a previous local [-Wshadow=local]
1043 | SMMUEventInfo event = {.inval_ste_allowed = true};
| ^~~~~
../../hw/arm/smmuv3.c:1038:19: note: shadowed declaration is here
1038 | IOMMUTLBEvent event;
| ^~~~~
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20230922152944.3583438-4-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Avoid shadowing a local variable in arm_sysctl_write():
../../hw/misc/arm_sysctl.c: In function ‘arm_sysctl_write’:
../../hw/misc/arm_sysctl.c:537:26: warning: declaration of ‘val’ shadows a parameter [-Wshadow=local]
537 | uint32_t val;
| ^~~
../../hw/misc/arm_sysctl.c:388:39: note: shadowed declaration is here
388 | uint64_t val, unsigned size)
| ~~~~~~~~~^~~
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20230922152944.3583438-3-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Avoid shadowing a local variable in do_process_its_cmd():
../../hw/intc/arm_gicv3_its.c:548:17: warning: declaration of ‘ite’ shadows a previous local [-Wshadow=compatible-local]
548 | ITEntry ite = {};
| ^~~
../../hw/intc/arm_gicv3_its.c:518:13: note: shadowed declaration is here
518 | ITEntry ite;
| ^~~
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20230922152944.3583438-2-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Code changes in acpi that addresses all compiler complaints coming from enabling
-Wshadow flags. Enabling -Wshadow catches cases of local variables shadowing
other local variables or parameters. These makes the code confusing and/or adds
bugs that are difficult to catch. See also
Subject: Help wanted for enabling -Wshadow=local
Message-Id: <87r0mqlf9x.fsf@pond.sub.org>
https://lore.kernel.org/qemu-devel/87r0mqlf9x.fsf@pond.sub.org
The code is tested to build with and without the flag turned on.
CC: Markus Armbruster <armbru@redhat.com>
CC: Philippe Mathieu-Daude <philmd@linaro.org>
CC: mst@redhat.com
CC: imammedo@redhat.com
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-ID: <20230922124203.127110-1-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fixes build with -Wshadow=local
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-ID: <20230922105742.81317-1-berto@igalia.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rename SysBusDevice variable to avoid this warning :
../hw/ppc/spapr_pci.c: In function ‘spapr_phb_realize’:
../hw/ppc/spapr_pci.c:1872:24: warning: declaration of ‘s’ shadows a previous local [-Wshadow=local]
1872 | SpaprPhbState *s;
| ^
../hw/ppc/spapr_pci.c:1829:19: note: shadowed declaration is here
1829 | SysBusDevice *s = SYS_BUS_DEVICE(dev);
| ^
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230918145850.241074-8-clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Remove extra 'drc_index' variable to avoid this warning :
../hw/ppc/spapr_drc.c: In function ‘rtas_ibm_configure_connector’:
../hw/ppc/spapr_drc.c:1240:26: warning: declaration of ‘drc_index’ shadows a previous local [-Wshadow=compatible-local]
1240 | uint32_t drc_index = spapr_drc_index(drc);
| ^~~~~~~~~
../hw/ppc/spapr_drc.c:1155:14: note: shadowed declaration is here
1155 | uint32_t drc_index;
| ^~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230918145850.241074-7-clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Remove extra 'i' variable to fix this warning :
../hw/ppc/spapr.c: In function ‘spapr_init_cpus’:
../hw/ppc/spapr.c:2668:13: warning: declaration of ‘i’ shadows a previous local [-Wshadow=compatible-local]
2668 | int i;
| ^
../hw/ppc/spapr.c:2645:9: note: shadowed declaration is here
2645 | int i;
| ^
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230918145850.241074-5-clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Introduce a helper routine defining one CPU device node to fix this
warning :
../hw/ppc/spapr.c: In function ‘spapr_dt_cpus’:
../hw/ppc/spapr.c:812:19: warning: declaration of ‘cs’ shadows a previous local [-Wshadow=compatible-local]
812 | CPUState *cs = rev[i];
| ^~
../hw/ppc/spapr.c:786:15: note: shadowed declaration is here
786 | CPUState *cs;
| ^~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230918145850.241074-4-clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
this fixes numerous warnings of this type :
In file included from ../hw/ppc/spapr_pci.c:43:
../hw/ppc/spapr_pci.c: In function ‘spapr_dt_phb’:
../include/hw/ppc/fdt.h:18:13: warning: declaration of ‘ret’ shadows a previous local [-Wshadow=compatible-local]
18 | int ret = (exp); \
| ^~~
../hw/ppc/spapr_pci.c:2355:5: note: in expansion of macro ‘_FDT’
2355 | _FDT(bus_off = fdt_add_subnode(fdt, 0, phb->dtbusname));
| ^~~~
../hw/ppc/spapr_pci.c:2311:24: note: shadowed declaration is here
2311 | int bus_off, i, j, ret;
| ^~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230918145850.241074-2-clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix:
hw/intc/openpic.c: In function ‘openpic_gbl_write’:
hw/intc/openpic.c:614:17: warning: declaration of ‘idx’ shadows a previous local [-Wshadow=compatible-local]
614 | int idx;
| ^~~
hw/intc/openpic.c:568:9: note: shadowed declaration is here
568 | int idx;
| ^~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904162824.85385-3-philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix:
softmmu/memory.c: In function ‘mtree_print_mr’:
softmmu/memory.c:3236:27: warning: declaration of ‘ml’ shadows a previous local [-Wshadow=compatible-local]
3236 | MemoryRegionList *ml;
| ^~
softmmu/memory.c:3213:32: note: shadowed declaration is here
3213 | MemoryRegionList *new_ml, *ml, *next_ml;
| ^~
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904161235.84651-22-philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix:
hw/mips/boston.c:472:5: error: declaration shadows a local variable [-Werror,-Wshadow]
qemu_fdt_setprop_cells(fdt, name, "reg", reg_base, reg_size);
^
include/sysemu/device_tree.h:129:13: note: expanded from macro 'qemu_fdt_setprop_cells'
int i;
^
hw/mips/boston.c:461:9: note: previous declaration is here
int i;
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904161235.84651-21-philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix:
linux-user/strace.c: In function ‘print_sockaddr’:
linux-user/strace.c:370:17: warning: declaration of ‘i’ shadows a previous local [-Wshadow=compatible-local]
370 | int i;
| ^
linux-user/strace.c:361:9: note: shadowed declaration is here
361 | int i;
| ^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904161235.84651-20-philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix:
util/vhost-user-server.c: In function ‘set_watch’:
util/vhost-user-server.c:274:20: warning: declaration of ‘vu_fd_watch’ shadows a previous local [-Wshadow=compatible-local]
274 | VuFdWatch *vu_fd_watch = g_new0(VuFdWatch, 1);
| ^~~~~~~~~~~
util/vhost-user-server.c:271:16: note: shadowed declaration is here
271 | VuFdWatch *vu_fd_watch = find_vu_fd_watch(server, fd);
| ^~~~~~~~~~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904161235.84651-18-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Stefan Hajnoczi