Add migration dirty-limit capability test if kernel support
dirty ring.
Migration dirty-limit capability introduce dirty limit
capability, two parameters: x-vcpu-dirty-limit-period and
vcpu-dirty-limit are introduced to implement the live
migration with dirty limit.
The test case does the following things:
1. start src, dst vm and enable dirty-limit capability
2. start migrate and set cancel it to check if dirty limit
stop working.
3. restart dst vm
4. start migrate and enable dirty-limit capability
5. check if migration satisfy the convergence condition
during pre-switchover phase.
Note that this test case involves many passes, so it runs
in slow mode only.
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <e55a302df9da7dbc00ad825f47f57c1a756d303e.1698847223.git.yong.huang@smartx.com>
modify multifd tcp common test to incorporate the new QAPI
syntax defined.
Suggested-by: Aravind Retnakaran <aravind.retnakaran@nutanix.com>
Signed-off-by: Het Gala <het.gala@nutanix.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231023182053.8711-15-farosas@suse.de>
To do so, create two paired sockets, but make them not providing real data.
Feed those fake sockets to src/dst QEMUs for recovery to let them go into
RECOVER stage without going out. Test that we can always kick it out and
recover again with the right ports.
This patch is based on Fabiano's version here:
https://lore.kernel.org/r/877cowmdu0.fsf@suse.de
Signed-off-by: Fabiano Rosas <farosas@suse.de>
[peterx: write commit message, remove case 1, fix bugs, and more]
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231017202633.296756-4-peterx@redhat.com>
[ Maintainer note:
I put the test as flaky because our CI has problems with shared
memory. We will remove the flaky bits as soon as we get a solution.
]
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1698263069-406971-7-git-send-email-steven.sistare@oracle.com>
Accept the QTEST_QEMU_MACHINE_TYPE environment variable to take a
machine type to use in the tests.
The full machine type is recognized (e.g. pc-q35-8.2). Aliases
(e.g. pc) are also allowed and resolve to the latest machine version
for that alias, or, if using two QEMU binaries, to the latest common
machine version between the two.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231018192741.25885-12-farosas@suse.de>
We have strict rules around migration compatibility between different
QEMU versions but no test to validate the migration state between
different binaries.
Add infrastructure to allow running the migration tests with two
different QEMU binaries as migration source and destination.
The code now recognizes two new environment variables
QTEST_QEMU_BINARY_SRC and QTEST_QEMU_BINARY_DST. In the absence of
either of them, the test will use the QTEST_QEMU_BINARY variable. If
both are missing then the tests are run with single binary as
previously.
The machine type is selected automatically as the latest machine type
version that works with both binaries.
Usage (only one of SRC|DST is allowed):
QTEST_QEMU_BINARY_SRC=../build-8.2.0/qemu-system-x86_64 \
QTEST_QEMU_BINARY=../build-8.1.0/qemu-system-x86_64 \
./tests/qtest/migration-test
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231018192741.25885-11-farosas@suse.de>
Change the x86_64 to use the q35 machines in tests from now on. Keep
testing the pc macine on 32bit.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231018192741.25885-10-farosas@suse.de>
We're about to enable the x86_64 tests to run with the q35 machine,
but that machine does not work with the program we use to dirty the
memory for the tests.
The issue is that QEMU needs to guess the geometry of the "disk" we
give to it and the guessed geometry doesn't pass the sanity checks
done by SeaBIOS. This causes SeaBIOS to interpret the geometry as if
needing a translation from LBA to CHS and SeaBIOS ends up miscomputing
the number of cylinders and aborting due to that.
The reason things work with the "pc" machine is that is uses ATA
instead of AHCI like q35 and SeaBIOS has an exception for ATA that
ends up skipping the sanity checks and ignoring translation
altogether.
Workaround this situation by specifying a geometry in the command
line.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231018192741.25885-9-farosas@suse.de>
Stop relying on defaults and select a machine explicitly for every
architecture.
This is a prerequisite for being able to select machine types for
migration using different QEMU binaries for source and destination.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231018192741.25885-8-farosas@suse.de>
The analyze-migration.py script fails on s390x hosts:
Traceback (most recent call last):
File "scripts/analyze-migration.py", line 662, in <module>
dump.read(dump_memory = args.memory)
File "scripts/analyze-migration.py", line 596, in read
classdesc = self.section_classes[section_key]
KeyError: ('s390-storage_attributes', 0)
It obviously never has been adapted to s390x yet, so until this
has been done, disable this test on s390x.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231018091239.164452-1-thuth@redhat.com>
Add basic tests for file-based migration.
Note that we cannot use test_precopy_common because that routine
expects it to be possible to run the migration live. With the file
transport there is no live migration because we must wait for the
source to finish writing the migration data to the file before the
destination can start reading. Add a new migration function
specifically to handle the file migration.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230712190742.22294-7-farosas@suse.de>
Add a smoke test that migrates to a file and gives it to the
script. It should catch the most annoying errors such as changes in
the ram flags.
After code has been merged it becomes way harder to figure out what is
causing the script to fail, the person making the change is the most
likely to know right away what the problem is.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231009184326.15777-7-farosas@suse.de>
There is currently no way to write a test for errors that happened in
qmp_migrate before the migration has started.
Add a version of qmp_migrate that ensures an error happens. To make
use of it a test needs to set MigrateCommon.result as
MIG_TEST_QMP_ERROR.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230712190742.22294-6-farosas@suse.de>
Use the new migrate_incoming_qmp helper in the places that currently
open-code calling migrate-incoming.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230712190742.22294-4-farosas@suse.de>
The following patch will make use of this function from within
migrate-helpers.c, so move it there.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230712190742.22294-2-farosas@suse.de>
So no need to assert we are in x86_64.
Once there, refactor the function to remove useless variables.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230608224943.3877-11-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The bootsector code is read only from the guest (otherwise we are
going to have problems with it being read from both source and
destination).
Create a single copy for all the tests.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230608224943.3877-10-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
So just make it a global variable.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230608224943.3877-9-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
So arch_dirty_ring option becomes one option like the others.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230608224943.3877-8-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
with some rewording in
tests/qemu-iotests/298
tests/qtest/fuzz/generic_fuzz.c
tests/unit/test-throttle.c
as suggested by Eric.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
The Postcopy preempt capability is expected to be set before incoming
starts, so change the postcopy tests to start with deferred incoming and
call migrate-incoming after the cap has been set.
Why the existing tests (without this patch) didn't fail?
There could be two reasons:
1) "backlog" specifies the number of pending connections. As long as the
server accepts the connections faster than the clients side connecting,
connection will succeed. For the preempt test, it uses only 2 channels,
so very likely to not have pending connections.
2) per my tests (on kernel 6.2), the number of pending connections allowed
is actually "backlog + 1", which is 2 in this case.
That said, the implementation of socket_start_incoming_migration_internal
expects "migrate defer" to be used, and for safety, change the test to
work with the expected usage.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230606101910.20456-3-wei.w.wang@intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
And it needs to be in both source and target, so put it on arch_opts.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230608224943.3877-7-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This will contain the options needed for both source and target.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230608224943.3877-6-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It makes no sense that we don't have the same configuration on both sides.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-ID: <20230608224943.3877-2-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This wasn't noticed because the test is currently disabled.
Fixes: 02f56e3de ("tests/qtest: massively speed up migration-test")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230711212131.2370-1-farosas@suse.de>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The migration test cases that actually exercise live migration want to
ensure there is a minimum of two iterations of pre-copy, in order to
exercise the dirty tracking code.
Historically we've queried the migration status, looking for the
'dirty-sync-count' value to increment to track iterations. This was
not entirely reliable because often all the data would get transferred
quickly enough that the migration would finish before we wanted it
to. So we massively dropped the bandwidth and max downtime to
guarantee non-convergance. This had the unfortunate side effect
that every migration took at least 30 seconds to run (100 MB of
dirty pages / 3 MB/sec).
This optimization takes a different approach to ensuring that a
mimimum of two iterations. Rather than waiting for dirty-sync-count
to increment, directly look for an indication that the source VM
has dirtied RAM that has already been transferred.
On the source VM a magic marker is written just after the 3 MB
offset. The destination VM is now montiored to detect when the
magic marker is transferred. This gives a guarantee that the
first 3 MB of memory have been transferred. Now the source VM
memory is monitored at exactly the 3MB offset until we observe
a flip in its value. This gives us a guaranteed that the guest
workload has dirtied a byte that has already been transferred.
Since we're looking at a place that is only 3 MB from the start
of memory, with the 3 MB/sec bandwidth, this test should complete
in 1 second, instead of 30 seconds.
Once we've proved there is some dirty memory, migration can be
set back to full speed for the remainder of the 1st iteration,
and the entire of the second iteration at which point migration
should be complete.
On a test machine this further reduces the migration test time
from 8 minutes to 1 minute 40.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230601161347.1803440-11-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add migration switchover ack capability test. The test runs without
devices that support this capability, but is still useful to make sure
it didn't break anything.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: YangHang Liu <yanghliu@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Document every single live=true use cases on why it should be done in the
live manner. Also document on the parameter so new precopy cases should
always use live=off unless with explicit reasonings.
Cc: Thomas Huth <thuth@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20230601172935.175726-1-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
There are 27 pre-copy live migration scenarios being tested. In all of
these we force non-convergence and run for one iteration, then let it
converge and wait for completion during the second (or following)
iterations. At 3 mbps bandwidth limit the first iteration takes a very
long time (~30 seconds).
While it is important to test the migration passes and convergence
logic, it is overkill to do this for all 27 pre-copy scenarios. The
TLS migration scenarios in particular are merely exercising different
code paths during connection establishment.
To optimize time taken, switch most of the test scenarios to run
non-live (ie guest CPUs paused) with no bandwidth limits. This gives
a massive speed up for most of the test scenarios.
For test coverage the following scenarios are unchanged
* Precopy with UNIX sockets
* Precopy with UNIX sockets and dirty ring tracking
* Precopy with XBZRLE
* Precopy with UNIX compress
* Precopy with UNIX compress (nowait)
* Precopy with multifd
On a test machine this reduces execution time from 13 minutes to
8 minutes.
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230601161347.1803440-10-berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The 'got_stop' and 'got_resume' global variables apply to the src and
dst migration VM respectively. Change their names to make this explicit
to developers.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230601161347.1803440-9-berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When running migration tests we monitor for a STOP event so we can skip
redundant waits. This will be needed for the RESUME event too shortly.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230601161347.1803440-8-berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Most usage of wait_command() is followed by qobject_unref(), which
is just a verbose re-implementation of qtest_qmp_assert_success().
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230601161347.1803440-7-berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Change the migration test to use the new qtest event callback to watch
for the stop event. This ensures that we only watch for the STOP event
on the source QEMU. The previous code would set the single 'got_stop'
flag when either source or dest QEMU got the STOP event.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230601161347.1803440-6-berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Some of the usage is just a verbose way of re-inventing the
qtest_qmp_assert_success(_ref) methods.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230601161347.1803440-5-berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This function duplicates logic of qtest_qmp_assert_success_ref.
The qtest_qmp_assert_success_ref method has better diagnostics
on failure because it prints the entire QMP response, instead
of just asserting on existance of the 'error' key.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230601161347.1803440-4-berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The qmp_discard_response method simply ignores the result of the QMP
command, merely unref'ing the object. This is a bad idea for tests
as it leaves no trace if the QMP command unexpectedly failed. The
qtest_qmp_assert_success method will validate that the QMP command
returned without error, and if errors occur, it will print a message
on the console aiding debugging.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230421171411.566300-2-berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add postcopy tests with compress enabled to ensure nothing breaks
with the refactoring in the next commits.
preempt+compress is blocked, so no test needed for that case.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
There has never been tests for migration with compress enabled.
Add suitable tests, testing with compress-wait-thread = false
too.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It is possible to have a build with both TCG and KVM disabled due to
Xen requiring the i386 and x86_64 binaries to be present in an aarch64
host.
If we build with --disable-tcg on the aarch64 host, we will end-up
with a QEMU binary (x86) that does not support TCG nor KVM.
Skip tests that crash or hang in the above scenario. Do not include
any test cases if TCG and KVM are missing.
Make sure that calls to qtest_has_accel are placed after g_test_init
in similar fashion to commit ae4b01b349 ("tests: Ensure TAP version is
printed before other messages") to avoid TAP parsing errors.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230426180013.14814-9-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230412142001.16501-3-quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The TAP protocol version line must be the first thing printed on
stdout. The migration test failed that requirement in certain
scenarios:
# Skipping test: Userfault not available (builtdtime)
TAP version 13
# random seed: R02Sc120c807f11053eb90bfea845ba1e368
1..32
# Start of x86_64 tests
# Start of migration tests
....
The TAP version is printed by g_test_init(), so we need to make
sure that any methods which print are run after that.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230317170553.592707-1-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Thomas found an autoconverge test failure where the
migration completed before the autoconverge had kicked in.
To try and avoid this again:
a) Reduce the usleep in test_migrate_auto_converge
so that it should exit quicker when autoconverge kicks in
b) Make the loop exit immediately rather than have the sleep
when it does start autoconverge, otherwise the autoconverge
might succeed during the sleep.
c) Reduce inc_pct so auto converge happens more slowly
d) Reduce the max-bandwidth in migrate_ensure_non_converge
to make the ensure more ensure.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20230306152612.52291-1-dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
migration-test has been flaky for a long time, both in CI and
otherwise:
https://gitlab.com/qemu-project/qemu/-/jobs/3806090216
(a FreeBSD job)
32/648 ERROR:../tests/qtest/migration-helpers.c:205:wait_for_migration_status: assertion failed: (g_test_timer_elapsed() < MIGRATION_STATUS_WAIT_TIMEOUT) ERROR
on a local macos x86 box:
▶ 34/621 ERROR:../../tests/qtest/migration-helpers.c:151:migrate_query_not_failed: assertion failed: (!g_str_equal(status, "failed")) ERROR
34/621 qemu:qtest+qtest-i386 / qtest-i386/migration-test ERROR 168.12s killed by signal 6 SIGABRT
――――――――――――――――――――――――――――――――――――― ✀ ―――――――――――――――――――――――――――――――――――――
stderr:
qemu-system-i386: Failed to peek at channel
query-migrate shows failed migration: Unable to write to socket: Broken pipe
**
ERROR:../../tests/qtest/migration-helpers.c:151:migrate_query_not_failed: assertion failed: (!g_str_equal(status, "failed"))
(test program exited with status code -6)
――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
▶ 37/621 ERROR:../../tests/qtest/migration-helpers.c:151:migrate_query_not_failed: assertion failed: (!g_str_equal(status, "failed")) ERROR
37/621 qemu:qtest+qtest-x86_64 / qtest-x86_64/migration-test ERROR 174.37s killed by signal 6 SIGABRT
――――――――――――――――――――――――――――――――――――― ✀ ―――――――――――――――――――――――――――――――――――――
stderr:
query-migrate shows failed migration: Unable to write to socket: Broken pipe
**
ERROR:../../tests/qtest/migration-helpers.c:151:migrate_query_not_failed: assertion failed: (!g_str_equal(status, "failed"))
(test program exited with status code -6)
In the cases where I've looked at the underlying log, this seems to
be in the migration/multifd/tcp/plain/cancel subtest. Disable that
specific subtest by default until somebody can track down the
underlying cause. Enthusiasts can opt back in by setting
QEMU_TEST_FLAKY_TESTS=1 in their environment.
We might need to disable more parts of this test if this isn't
sufficient to fix the flakiness.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230302172211.4146376-1-peter.maydell@linaro.org
Add a helper to create the uffd handle.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
As qemu_socketpair() was introduced in commit 3c63b4e9
("oslib-posix: Introduce qemu_socketpair()"), it's time
to replace the other existing socketpair() calls with
qemu_socketpair() if possible
Signed-off-by: Guoyi Tu <tugy@chinatelecom.cn>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <cd28916a-f1f3-b54e-6ade-8a3647c3a9a5@chinatelecom.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When running the migration test compiled with Clang from Fedora 37
and sanitizers enabled, there is an error complaining about unlink():
../tests/qtest/migration-test.c:1072:12: runtime error: null pointer
passed as argument 1, which is declared to never be null
/usr/include/unistd.h:858:48: note: nonnull attribute specified here
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior
../tests/qtest/migration-test.c:1072:12 in
(test program exited with status code 1)
TAP parsing error: Too few tests run (expected 33, got 20)
The data->clientcert and data->clientkey pointers can indeed be unset
in some tests, so we have to check them before calling unlink() with
those.
While we're at it, I also noticed that the code is only freeing
some but not all of the allocated strings in this function, and
indeed, valgrind is also complaining about memory leaks here.
So let's call g_free() on all allocated strings to avoid leaking
memory here.
Message-Id: <20221125083054.117504-1-thuth@redhat.com>
Tested-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since commit f1018ea0a3 ("tests: avoid DOS line endings in PSK file"),
the bug of the helper test_tls_psk_init_common() that caused TLS PSK
tests to fail on Windows was fixed. Let's enable these tests on win32.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20221101035021.729669-1-bin.meng@windriver.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20221105115525.623059-1-sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Hyman Huang