The goal is to reduce the amount of requests issued by a guest on
1M reads/writes. This rises the performance up to 4% on that kind of
disk access pattern.
The maximum chunk size to be used for the guest disk accessing is
limited with seg_max parameter, which represents the max amount of
pices in the scatter-geather list in one guest disk request.
Since seg_max is virqueue_size dependent, increasing the virtqueue
size increases seg_max, which, in turn, increases the maximum size
of data to be read/write from a guest disk.
More details in the original problem statment:
https://lists.gnu.org/archive/html/qemu-devel/2017-12/msg03721.html
Suggested-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Message-id: 20200214074648.958-1-dplotnikov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Booting the r2d machine from flash fails because flash is not discovered.
Looking at the flattened memory tree, we see the following.
FlatView #1
AS "memory", root: system
AS "cpu-memory-0", root: system
AS "sh_pci_host", root: bus master container
Root memory region: system
0000000000000000-000000000000ffff (prio 0, i/o): io
0000000000010000-0000000000ffffff (prio 0, i/o): r2d.flash @0000000000010000
The overlapping memory region is sh_pci.isa, ie the ISA I/O region bridge.
This region is initially assigned to address 0xfe240000, but overwritten
with a write into the PCIIOBR register. This write is expected to adjust
the PCI memory window, but not to change the region's base adddress.
Peter Maydell provided the following detailed explanation.
"Section 22.3.7 and in particular figure 22.3 (of "SSH7751R user's manual:
hardware") are clear about how this is supposed to work: there is a window
at 0xfe240000 in the system register space for PCI I/O space. When the CPU
makes an access into that area, the PCI controller calculates the PCI
address to use by combining bits 0..17 of the system address with the
bits 31..18 value that the guest has put into the PCIIOBR. That is, writing
to the PCIIOBR changes which section of the IO address space is visible in
the 0xfe240000 window. Instead what QEMU's implementation does is move the
window to whatever value the guest writes to the PCIIOBR register -- so if
the guest writes 0 we put the window at 0 in system address space."
Fix the problem by calling memory_region_set_alias_offset() instead of
removing and re-adding the PCI ISA subregion on writes into PCIIOBR.
At the same time, in sh_pci_device_realize(), don't set iobr since
it is overwritten later anyway. Instead, pass the base address to
memory_region_add_subregion() directly.
Many thanks to Peter Maydell for the detailed problem analysis, and for
providing suggestions on how to fix the problem.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200218201050.15273-1-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Correct the number of dummy cycles required by the FAST_READ_4 command (to
be eight, one dummy byte).
Fixes: ef06ca3946 ("xilinx_spips: Add support for RX discard and RX drain")
Suggested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200218113350.6090-1-frasse.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instantiate EHCI and OHCI controllers on Allwinner A10. OHCI ports are
modeled as companions of the respective EHCI ports.
With this patch applied, USB controllers are discovered and instantiated
when booting the cubieboard machine with a recent Linux kernel.
ehci-platform 1c14000.usb: EHCI Host Controller
ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
ehci-platform 1c14000.usb: irq 26, io mem 0x01c14000
ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
ehci-platform 1c1c000.usb: EHCI Host Controller
ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
ehci-platform 1c1c000.usb: irq 31, io mem 0x01c1c000
ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
ohci-platform 1c14400.usb: Generic Platform OHCI controller
ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
ohci-platform 1c14400.usb: irq 27, io mem 0x01c14400
ohci-platform 1c1c400.usb: Generic Platform OHCI controller
ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400
usb 2-1: new high-speed USB device number 2 using ehci-platform
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host1: usb-storage 2-1:1.0
usb 3-1: new full-speed USB device number 2 using ohci-platform
input: QEMU QEMU USB Mouse as /devices/platform/soc/1c14400.usb/usb3/3-1/3-1:1.0/0003:0627:0001.0001/input/input0
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200217204812.9857-4-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We'll use this property in a follow-up patch to insantiate an EHCI
bus with companion support.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200217204812.9857-3-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We need to be able to use OHCISysBusState outside hcd-ohci.c, so move it
to its include file.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200217204812.9857-2-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The isar_feature_aa32_pan and isar_feature_aa32_ats1e1 functions
are supposed to be testing fields in ID_MMFR3; but a cut-and-paste
error meant we were looking at MVFR0 instead.
Fix the functions to look at the right register; this requires
us to move at least id_mmfr3 to the ARMISARegisters struct; we
choose to move all the ID_MMFRn registers for consistency.
Fixes: 3d6ad6bb46
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200214175116.9164-19-peter.maydell@linaro.org
Instead of open-coding a check on the ID_DFR0 PerfMon ID register
field, create a standardly-named isar_feature for "does AArch32 have
a v8.1 PMUv3" and use it.
This entails moving the id_dfr0 field into the ARMISARegisters struct.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200214175116.9164-9-peter.maydell@linaro.org
Up to now, the z2 machine only boots if a flash image is provided.
This is not really necessary; the machine can boot from initrd or from
SD without it. At the same time, having to provide dummy flash images
is a nuisance and does not add any real value. Make it optional.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200217210903.18602-1-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Up to now, the mainstone machine only boots if two flash images are
provided. This is not really necessary; the machine can boot from initrd
or from SD without it. At the same time, having to provide dummy flash
images is a nuisance and does not add any real value. Make it optional.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200217210824.18513-1-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix warning reported by Clang static code analyzer:
CC hw/misc/iotkit-secctl.o
hw/misc/iotkit-secctl.c:343:9: warning: Value stored to 'value' is never read
value &= 0x00f000f3;
^ ~~~~~~~~~~
Fixes: b3717c23e1
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200217132922.24607-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This returns a fixed but non-zero value for the chip id.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200121013302.43839-3-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This splits the common write callback into separate ast2400 and ast2500
implementations. This makes it clearer when implementing differing
behaviour.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200121013302.43839-2-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The device tree blob returned by load_device_tree is malloced.
We should free it after cpu_physical_memory_write().
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Message-Id: <20200218091154.21696-3-kuhn.chenqun@huawei.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We already detect if a device is being hot plugged before CAS to trigger
a CAS reboot and during migration to migrate the state of the associated
DRC. But hot unplugging a device is also an asynchronous operation that
requires the guest to take action. This means that if the guest is migrated
after the hot unplug event was sent but before it could release the device
with RTAS, the destination QEMU doesn't know about the pending unplug
operation and doesn't actually remove the device when the guest finally
releases it.
Similarly, if the unplug request is fired before CAS, the guest isn't
notified of the change, just like with hotplug. It ends up booting with
the device still present in the DT and configures it, just like it was
never removed. Even weirder, since the event is still queued, it will
be eventually processed when some other unrelated event is posted to
the guest.
Enhance spapr_drc_transient() to also return true if an unplug request is
pending. This fixes the issue at CAS with a CAS reboot request and
causes the DRC state to be migrated. Some extra care is still needed to
inform the destination that an unplug request is pending : migrate the
unplug_requested field of the DRC in an optional subsection. This might
break backwards migration, but this is still better than ending with
an inconsistent guest.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158169248798.3465937.1108351365840514270.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We currently don't support hotplug of devices between boot and CAS. If
this happens a CAS reboot is triggered. We detect this during CAS using
the spapr_drc_needed() function which is essentially a VMStateDescription
.needed callback. Even if the condition for CAS reboot happens to be the
same as for DRC migration, it looks wrong to piggyback a migration helper
for this.
Introduce a helper with slightly more explicit name and use it in both CAS
and DRC migration code. Since a subsequent patch will enhance this helper
to cover the case of hot unplug, let's go for spapr_drc_transient(). While
here convert spapr_hotplugged_dev_before_cas() to the "transient" wording as
well.
This doesn't change any behaviour.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158169248180.3465937.9531405453362718771.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
'fdt' forgot to clean both e500 and pnv when we call 'system_reset' on ppc,
this patch fix it. The leak stacks are as follow:
Direct leak of 4194304 byte(s) in 4 object(s) allocated from:
#0 0x7fafe37dd970 in __interceptor_calloc (/lib64/libasan.so.5+0xef970)
#1 0x7fafe2e3149d in g_malloc0 (/lib64/libglib-2.0.so.0+0x5249d)
#2 0x561876f7f80d in create_device_tree /mnt/sdb/qemu-new/qemu/device_tree.c:40
#3 0x561876b7ac29 in ppce500_load_device_tree /mnt/sdb/qemu-new/qemu/hw/ppc/e500.c:364
#4 0x561876b7f437 in ppce500_reset_device_tree /mnt/sdb/qemu-new/qemu/hw/ppc/e500.c:617
#5 0x56187718b1ae in qemu_devices_reset /mnt/sdb/qemu-new/qemu/hw/core/reset.c:69
#6 0x561876f6938d in qemu_system_reset /mnt/sdb/qemu-new/qemu/vl.c:1412
#7 0x561876f6a25b in main_loop_should_exit /mnt/sdb/qemu-new/qemu/vl.c:1645
#8 0x561876f6a398 in main_loop /mnt/sdb/qemu-new/qemu/vl.c:1679
#9 0x561876f7da8e in main /mnt/sdb/qemu-new/qemu/vl.c:4438
#10 0x7fafde16b812 in __libc_start_main ../csu/libc-start.c:308
#11 0x5618765c055d in _start (/mnt/sdb/qemu-new/qemu/build/ppc64-softmmu/qemu-system-ppc64+0x2b1555d)
Direct leak of 1048576 byte(s) in 1 object(s) allocated from:
#0 0x7fc0a6f1b970 in __interceptor_calloc (/lib64/libasan.so.5+0xef970)
#1 0x7fc0a656f49d in g_malloc0 (/lib64/libglib-2.0.so.0+0x5249d)
#2 0x55eb05acd2ca in pnv_dt_create /mnt/sdb/qemu-new/qemu/hw/ppc/pnv.c:507
#3 0x55eb05ace5bf in pnv_reset /mnt/sdb/qemu-new/qemu/hw/ppc/pnv.c:578
#4 0x55eb05f2f395 in qemu_system_reset /mnt/sdb/qemu-new/qemu/vl.c:1410
#5 0x55eb05f43850 in main /mnt/sdb/qemu-new/qemu/vl.c:4403
#6 0x7fc0a18a9812 in __libc_start_main ../csu/libc-start.c:308
#7 0x55eb0558655d in _start (/mnt/sdb/qemu-new/qemu/build/ppc64-softmmu/qemu-system-ppc64+0x2b1555d)
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200214033206.4395-1-pannengyuan@huawei.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This allows moving the kernel in the guest memory. The option is useful
for step debugging (as Linux is linked at 0x0); it also allows loading
grub which is normally linked to run at 0x20000.
This uses the existing kernel address by default.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20200203032943.121178-6-aik@ozlabs.ru>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We obviously don't want to print out an error message if addr points to
a valid register.
Reported-by: Coverity CID 1419391 Missing break in switch
Fixes: 9ae1329ee2 "ppc/pnv: Add models for POWER8 PHB3 PCIe Host bridge"
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158153365202.3229002.11521084761048102466.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Obviously, we want to pass &local_err so that we can check it then
line below, not errp.
Reported-by: Coverity CID 1419395 'Constant' variable guards dead code
Fixes: 4f9924c4d4 "ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge"
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158153364605.3229002.2796177658957390343.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As reported by Coverity defect CID 1419397, the 'j' variable goes up to
63 and shouldn't be used to left shift a 32-bit integer.
The result of the operation goes to a 64-bit integer : use a 64-bit
constant.
Reported-by: Coverity CID 1419397 Bad bit shift operation
Fixes: 9ae1329ee2 "ppc/pnv: Add models for POWER8 PHB3 PCIe Host bridge"
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158153364010.3229002.8004283672455615950.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch implements few of the necessary hcalls for the nvdimm support.
PAPR semantics is such that each NVDIMM device is comprising of multiple
SCM(Storage Class Memory) blocks. The guest requests the hypervisor to
bind each of the SCM blocks of the NVDIMM device using hcalls. There can
be SCM block unbind requests in case of driver errors or unplug(not
supported now) use cases. The NVDIMM label read/writes are done through
hcalls.
Since each virtual NVDIMM device is divided into multiple SCM blocks,
the bind, unbind, and queries using hcalls on those blocks can come
independently. This doesn't fit well into the qemu device semantics,
where the map/unmap are done at the (whole)device/object level granularity.
The patch doesnt actually bind/unbind on hcalls but let it happen at the
device_add/del phase itself instead.
The guest kernel makes bind/unbind requests for the virtual NVDIMM device
at the region level granularity. Without interleaving, each virtual NVDIMM
device is presented as a separate guest physical address range. So, there
is no way a partial bind/unbind request can come for the vNVDIMM in a
hcall for a subset of SCM blocks of a virtual NVDIMM. Hence it is safe to
do bind/unbind everything during the device_add/del.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Message-Id: <158131059899.2897.11515211602702956854.stgit@lep8c.aus.stglabs.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add support for NVDIMM devices for sPAPR. Piggyback on existing nvdimm
device interface in QEMU to support virtual NVDIMM devices for Power.
Create the required DT entries for the device (some entries have
dummy values right now).
The patch creates the required DT node and sends a hotplug
interrupt to the guest. Guest is expected to undertake the normal
DR resource add path in response and start issuing PAPR SCM hcalls.
The device support is verified based on the machine version unlike x86.
This is how it can be used ..
Ex :
For coldplug, the device to be added in qemu command line as shown below
-object memory-backend-file,id=memnvdimm0,prealloc=yes,mem-path=/tmp/nvdimm0,share=yes,size=1073872896
-device nvdimm,label-size=128k,uuid=75a3cdd7-6a2f-4791-8d15-fe0a920e8e9e,memdev=memnvdimm0,id=nvdimm0,slot=0
For hotplug, the device to be added from monitor as below
object_add memory-backend-file,id=memnvdimm0,prealloc=yes,mem-path=/tmp/nvdimm0,share=yes,size=1073872896
device_add nvdimm,label-size=128k,uuid=75a3cdd7-6a2f-4791-8d15-fe0a920e8e9e,memdev=memnvdimm0,id=nvdimm0,slot=0
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
[Early implementation]
Message-Id: <158131058078.2897.12767731856697459923.stgit@lep8c.aus.stglabs.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For ppc64, PAPR requires the nvdimm device to have UUID property
set in the device tree. Add an option to get it from the user.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <158131056931.2897.14057087440721445976.stgit@lep8c.aus.stglabs.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
nvdimm_device_list is required for parsing the list for devices
in subsequent patches. Move it to common utility area.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <158131055857.2897.15658377276504711773.stgit@lep8c.aus.stglabs.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We are going to add more init for the latest machine, so move the setup
to a function so we don't have to change the DEFINE_SPAPR_MACHINE macro
each time.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20200207064628.1196095-1-mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When PHB4 bridge has been added, the dependencies to PCIE_PORT has been
added to XIVE_SPAPR and indirectly to PSERIES.
The build of the PowerNV machine is fine while we also build the PSERIES
machine.
If we disable the PSERIES machine, the PowerNV build fails because the
PCI Express files are not built:
/usr/bin/ld: hw/ppc/pnv.o: in function `pnv_chip_power8_pic_print_info':
.../hw/ppc/pnv.c:623: undefined reference to `pnv_phb3_msi_pic_print_info'
/usr/bin/ld: hw/ppc/pnv.o: in function `pnv_chip_power9_pic_print_info':
.../hw/ppc/pnv.c:639: undefined reference to `pnv_phb4_pic_print_info'
/usr/bin/ld: ../hw/usb/hcd-ehci-pci.o: in function `usb_ehci_pci_write_config':
.../hw/usb/hcd-ehci-pci.c:129: undefined reference to `pci_default_write_config'
/usr/bin/ld: ../hw/usb/hcd-ehci-pci.o: in function `usb_ehci_pci_realize':
.../hw/usb/hcd-ehci-pci.c:68: undefined reference to `pci_allocate_irq'
/usr/bin/ld: .../hw/usb/hcd-ehci-pci.c:72: undefined reference to `pci_register_bar'
/usr/bin/ld: ../hw/usb/hcd-ehci-pci.o:(.data.rel+0x50): undefined reference to `vmstate_pci_device'
This patch fixes the problem by adding needed dependencies to POWERNV.
Fixes: 4f9924c4d4 ("ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200205232016.588202-3-lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The "ibm,os-term" RTAS call has a single parameter which is a pointer to
a message from the guest kernel about the termination cause; this prints
it.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20200203032044.118585-1-aik@ozlabs.ru>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The device tree blob returned by load_device_tree is malloced.
We should free it after cpu_physical_memory_write().
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200218091154.21696-4-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The device tree blob returned by load_device_tree is malloced.
We should free it after cpu_physical_memory_write().
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200218091154.21696-2-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Register 0x818 is documented as 'undefined', and register
0x82c is not documented. Refuse their access.
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200218063355.18577-5-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Only 24 bits of the PCIROR register are documented
(see pp. 37 of datasheet referenced in this file header).
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200218063355.18577-4-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a comment with the name of each register in the 0x800-0x8ff range.
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200218063355.18577-2-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200214001303.12873-5-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We want to have an early exit path. Delay some initializations
before the variables are used.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20200214001303.12873-4-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of emitting the trace event before each call to
draw_line(), call it once at draw_line() entrance.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20200214001303.12873-2-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fix warnings reported by Clang static code analyzer:
CC hw/net/rocker/rocker.o
hw/net/rocker/rocker.c:213:9: warning: Value stored to 'tx_tso_mss' is never read
tx_tso_mss = rocker_tlv_get_le16(tlvs[ROCKER_TLV_TX_TSO_MSS]);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
hw/net/rocker/rocker.c:217:9: warning: Value stored to 'tx_tso_hdr_len' is never read
tx_tso_hdr_len = rocker_tlv_get_le16(tlvs[ROCKER_TLV_TX_TSO_HDR_LEN]);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
hw/net/rocker/rocker.c:255:9: warning: Value stored to 'tx_l3_csum_off' is never read
tx_l3_csum_off += tx_tso_mss = tx_tso_hdr_len = 0;
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: dc488f888
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200217101637.27558-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fix warning reported by Clang static code analyzer:
CC hw/block/pflash_cfi02.o
hw/block/pflash_cfi02.c:311:5: warning: Value stored to 'ret' is never read
ret = -1;
^ ~~
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200215161557.4077-4-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fix warning reported by Clang static code analyzer:
hw/display/qxl.c:1634:14: warning: Value stored to 'orig_io_port' during its initialization is never read
uint32_t orig_io_port = io_port;
^~~~~~~~~~~~ ~~~~~~~
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200215161557.4077-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fixes: 8b818e059b
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200218094402.26625-9-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fixes: 74d71ea16b
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200218094402.26625-8-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fixes: 956a78118b
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200218094402.26625-7-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fixes: 6f16da53ff
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200218094402.26625-6-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In a few places we report errno formatted as a negative integer.
This is not as user friendly as it can be. Use strerror() and/or
error_setg_errno() instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <4949c3ecf1a32189b8a4b5eb4b0fd04c1122501d.1581674006.git.mprivozn@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is a fairly light-weight pull request, but I wanted to send it out to
avoid the Goldfish stuff getting buried as the next PR should contain the H
extension implementation.
As far as this PR goes, it contains:
* The addition of syscon device tree nodes for reboot and poweroff, which
allows Linux to control QEMU without an additional driver. The existing
device was already compatible with the syscon interface.
* A fix to our GDB stub to avoid confusing XLEN and FLEN, specifically useful
for rv32id-based systems.
* A device emulation for the Goldfish RTC device, a simple memory-mapped RTC.
* The addition of the Goldfish RTC device to the RISC-V virt board.
This passes "make check" and boots buildroot for me.
-----BEGIN PGP SIGNATURE-----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=D4dQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-5.0-sf2' into staging
RISC-V Patches for the 5.0 Soft Freeze, Part 2
This is a fairly light-weight pull request, but I wanted to send it out to
avoid the Goldfish stuff getting buried as the next PR should contain the H
extension implementation.
As far as this PR goes, it contains:
* The addition of syscon device tree nodes for reboot and poweroff, which
allows Linux to control QEMU without an additional driver. The existing
device was already compatible with the syscon interface.
* A fix to our GDB stub to avoid confusing XLEN and FLEN, specifically useful
for rv32id-based systems.
* A device emulation for the Goldfish RTC device, a simple memory-mapped RTC.
* The addition of the Goldfish RTC device to the RISC-V virt board.
This passes "make check" and boots buildroot for me.
# gpg: Signature made Mon 10 Feb 2020 21:28:04 GMT
# gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
# Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889
* remotes/palmer/tags/riscv-for-master-5.0-sf2:
MAINTAINERS: Add maintainer entry for Goldfish RTC
riscv: virt: Use Goldfish RTC device
hw: rtc: Add Goldfish RTC device
riscv: Separate FPU register size from core register size in gdbstub [v2]
riscv/virt: Add syscon reboot and poweroff DT nodes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* i.MX: Fix inverted sense of register bits in watchdog timer
* i.MX: Add support for WDT on i.MX6
* arm/virt: cleanups to ACPI tables
* Implement ARMv8.1-VMID16 extension
* Implement ARMv8.1-PAN
* Implement ARMv8.2-UAO
* Implement ARMv8.2-ATS1E1
* ast2400/2500/2600: Wire up EHCI controllers
* hw/char/exynos4210_uart: Fix memleaks in exynos4210_uart_init
* hw/arm/raspi: Clean up the board code
-----BEGIN PGP SIGNATURE-----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=Mspo
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200213' into staging
target-arm queue:
* i.MX: Fix inverted sense of register bits in watchdog timer
* i.MX: Add support for WDT on i.MX6
* arm/virt: cleanups to ACPI tables
* Implement ARMv8.1-VMID16 extension
* Implement ARMv8.1-PAN
* Implement ARMv8.2-UAO
* Implement ARMv8.2-ATS1E1
* ast2400/2500/2600: Wire up EHCI controllers
* hw/char/exynos4210_uart: Fix memleaks in exynos4210_uart_init
* hw/arm/raspi: Clean up the board code
# gpg: Signature made Thu 13 Feb 2020 14:40:34 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20200213: (46 commits)
target/arm: Implement ARMv8.1-VMID16 extension
hw/arm/raspi: Extract the cores count from the board revision
hw/arm/raspi: Use a unique raspi_machine_class_init() method
hw/arm/raspi: Extract the board model from the board revision
hw/arm/raspi: Set default RAM size to size encoded in board revision
hw/arm/raspi: Let class_init() directly call raspi_machine_init()
hw/arm/raspi: Make board_rev a field of RaspiMachineClass
hw/arm/raspi: Make machines children of abstract RaspiMachineClass
hw/arm/raspi: Trivial code movement
hw/arm/raspi: Extract the processor type from the board revision
hw/arm/raspi: Extract the RAM size from the board revision
hw/arm/raspi: Extract the version from the board revision
hw/arm/raspi: Correct the board descriptions
hw/arm/raspi: Use BCM2708 machine type with pre Device Tree kernels
hw/char/exynos4210_uart: Fix memleaks in exynos4210_uart_init
hw/arm: ast2600: Wire up EHCI controllers
hw/arm: ast2400/ast2500: Wire up EHCI controllers
target/arm: Enable ARMv8.2-UAO in -cpu max
target/arm: Implement UAO semantics
target/arm: Update MSR access to UAO
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Denis Plotnikov