The CSD::CSR_IMP bit defines whether the Driver Stage
Register (DSR) is implemented or not. We do not set
this bit in CSD:
static void sd_set_csd(SDState *sd, uint64_t size)
{
...
if (size <= SDSC_MAX_CAPACITY) { /* Standard Capacity SD */
...
sd->csd[6] = 0xe0 | /* Partial block for read allowed */
((csize >> 10) & 0x03);
...
} else { /* SDHC */
...
sd->csd[6] = 0x00;
...
}
...
}
The sd_normal_command() switch case for the SEND_DSR
command do nothing and fallback to "illegal command".
Since the command is mandatory (although the register
isn't...) call the sd_cmd_unimplemented() handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-43-philmd@linaro.org>
Store the command class altogether with the other command
fields (handler, name and type).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-42-philmd@linaro.org>
Store the command type altogether with the command handler and name.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-41-philmd@linaro.org>
We already have a const array where command handlers
are listed. Store the command name there too.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-40-philmd@linaro.org>
Convert array of command handlers to array of structures.
The structure contains the command handler. No logical
change intended.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-39-philmd@linaro.org>
In order to access SDState::SDProto from sd_[a]cmd_name(),
pass SDState as argument.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-38-philmd@linaro.org>
Merge sdmmc-internal.c into sd.c by moving
sd_cmd_name() and sd_acmd_name() and updating
meson.build.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-37-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-33-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-32-philmd@linaro.org>
In order to modify the WRITE_SINGLE_BLOCK case in the
next commit, duplicate it first.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-31-philmd@linaro.org>
All commands switching from TRANSFER state to (receiving)DATA
do the same: receive stream of data from the DAT lines. Instead
of duplicating the same code many times, introduce 2 helpers:
- sd_cmd_to_receivingdata() on the I/O line setup the data to
be received on the data[] buffer,
- sd_generic_write_byte() on the DAT lines to push the data.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-30-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-29-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-27-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-24-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-23-philmd@linaro.org>
In order to modify the READ_SINGLE_BLOCK case in the
next commit, duplicate it first.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-22-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-21-philmd@linaro.org>
All commands switching from TRANSFER state to (sending)DATA
do the same: send stream of data on the DAT lines. Instead
of duplicating the same code many times, introduce 2 helpers:
- sd_cmd_to_sendingdata() on the I/O line setup the data to
be transferred,
- sd_generic_read_byte() on the DAT lines to fetch the data.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <4c9f7f51-83ee-421a-8690-9af2e80b134b@linaro.org>
Extract sd_blk_len() helper, use definitions instead
of magic values.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-15-philmd@linaro.org>
Keep direct reference to SDProto in SDState,
remove then unnecessary sd_proto().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-14-philmd@linaro.org>
Card entering sd_inactive_state powers off, and won't respond
anymore. Handle that once when entering sd_do_command().
Remove condition always true in sd_cmd_GO_IDLE_STATE().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-12-philmd@linaro.org>
SDCardStates enum values are specified, so assign them
correspondingly. It will be useful later when we add
states from later specs, which might not be continuous.
See CURRENT_STATE bits in section 4.10.1 "Card Status".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-11-philmd@linaro.org>
Per sections 3.6.1 (SD Bus Protocol), 4.3.4 "Data Write"
and 7.3.2 (Responses):
In the CMD line the Most Significant Bit is transmitted first.
Use the stl_be_p() helper to store the value in big-endian.
Fixes: a1bb27b1e9 ("Initial SD card emulation")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240628070216.92609-9-philmd@linaro.org>
Per sections 3.6.1 (SD Bus Protocol) and 7.3.2 (Responses):
In the CMD line the Most Significant Bit is transmitted first.
Use the stl_be_p() helper to store the value in big-endian.
Fixes: a1bb27b1e9 ("Initial SD card emulation")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240628070216.92609-8-philmd@linaro.org>
SWITCH_FUNCTION is only allowed in TRANSFER state
(See 4.8 "Card State Transition Table).
Fixes: a1bb27b1e9 ("Initial SD card emulation")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-13-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-6-philmd@linaro.org>
Useful to detect out of bound accesses.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-5-philmd@linaro.org>
The command is selected on the I/O lines, and further
processing might be done on the DAT lines via the
sd_read_byte() and sd_write_byte() handlers. Since
these methods can't distinct between normal and APP
commands, keep the name of the current command in
the SDState and use it in the DAT handlers. This
fixes a bug that all normal commands were displayed
as APP commands.
Fixes: 2ed61fb57b ("sdcard: Display command name when tracing CMD/ACMD")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-4-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-21-philmd@linaro.org>
These macros only save 3 chars and make the code harder
to maintain, simply remove them.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-20-philmd@linaro.org>
Having the mode switch displayed help to track incomplete
command implementations.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-19-philmd@linaro.org>
It will be useful later to assert only ADTC commands
(Addressed point-to-point Data Transfer Commands, defined
as the 'sd_adtc' enum) extract the address value from the
command argument.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-18-philmd@linaro.org>
Extract sd_cmd_get_address() so we can re-use it
in various SDProto handlers. Use CARD_CAPACITY and
HWBLOCK_SHIFT definitions instead of magic values.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-17-philmd@linaro.org>
It will be useful later to assert only AC commands
(Addressed point-to-point Commands, defined as the
'sd_ac' enum) extract the RCA value from the command
argument.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-16-philmd@linaro.org>
Extract sd_req_get_rca() so we can re-use it in various
SDProto handlers. Return a 16-bit value since RCA is 16-bit.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-15-philmd@linaro.org>
NULL handler is already handled as illegal, no need to
duplicate (that keeps this array simpler to maintain).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-9-philmd@linaro.org>
There is no ACMD6 command in SPI mode, remove the pointless
handler introduced in commit 946897ce18 ("sdcard: handles
more commands in SPI mode"). Keep sd_cmd_unimplemented()
since we'll reuse it later.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-8-philmd@linaro.org>
The ld/st API helps noticing CID or CSD bytes refer
to the same field. Multi-bytes fields are stored MSB
first in CID / CSD.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-7-philmd@linaro.org>
Use registerfield-generated definitions to update card_status.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-6-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-5-philmd@linaro.org>
There is no SEND_OP_CMD but SEND_OP_COND.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-4-philmd@linaro.org>
Keep this handler style in sync with other handlers by
using a switch() case, which might become handy to
handle other states.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240621080554.18986-3-philmd@linaro.org>
Philippe Mathieu-Daudé