Drop V9fsFidState's 'next' member, which is no longer used since:
f5265c8f91 ('9pfs: use GHashTable for fid table')
Fixes: f5265c8f91 ('9pfs: use GHashTable for fid table')
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1tE4v2-0051EH-Ni@kylie.crudebyte.com>
Some small bug fixes, notably a fix for a regression
in cpu hotplug after migration. I also included a
new test, just to help make sure we don't regress cxl.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmdHJRIPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpTkQIAJYFpFTPRnO8mA6gurfheB7Jt0ywAMrjKWfg
uEkfZXXSQeCS8NBNPoZt7S8AE6xHE2a4b5lNWiS4a4coFmgTjtKPM8YsU01riyRk
EasRxynGua2XGUWGK93r9L27v9zGz/vRC0Lujmw3VAUKGeL7a17KzmxwXLXe+DzS
PgcI/H5hqoCDalT8aF6wOEDaWIHeo4dauDubYavW/+yaPtUvmy9MBkXbIV4iYqT5
V6geeYIKW/yE/GHxxXOw/RE1FgpiZhebtQP26jPTSk0z/JaV5S0DNYs07joXmbaU
fW5LSLgH3+oDI/GIhvsZ6hP87rVXBdaAogeJqT8SsuChBR55TpY=
=B7KB
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: bug fixes, new test
Some small bug fixes, notably a fix for a regression
in cpu hotplug after migration. I also included a
new test, just to help make sure we don't regress cxl.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmdHJRIPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpTkQIAJYFpFTPRnO8mA6gurfheB7Jt0ywAMrjKWfg
# uEkfZXXSQeCS8NBNPoZt7S8AE6xHE2a4b5lNWiS4a4coFmgTjtKPM8YsU01riyRk
# EasRxynGua2XGUWGK93r9L27v9zGz/vRC0Lujmw3VAUKGeL7a17KzmxwXLXe+DzS
# PgcI/H5hqoCDalT8aF6wOEDaWIHeo4dauDubYavW/+yaPtUvmy9MBkXbIV4iYqT5
# V6geeYIKW/yE/GHxxXOw/RE1FgpiZhebtQP26jPTSk0z/JaV5S0DNYs07joXmbaU
# fW5LSLgH3+oDI/GIhvsZ6hP87rVXBdaAogeJqT8SsuChBR55TpY=
# =B7KB
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 27 Nov 2024 13:56:34 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
vhost: fail device start if iotlb update fails
bios-tables-test: Add data for complex numa test (GI, GP etc)
bios-tables-test: Add complex SRAT / HMAT test for GI GP
bios-tables-test: Allow for new acpihmat-generic-x test data.
qapi/qom: Change Since entry for AcpiGenericPortProperties to 9.2
hw/acpi: Fix size of HID in build_append_srat_acpi_device_handle()
qapi: fix device-sync-config since-version
hw/cxl: Check for zero length features in cmd_features_set_feature()
tests/acpi: update expected blobs
Revert "hw/acpi: Make CPUs ACPI `presence` conditional during vCPU hot-unplug"
Revert "hw/acpi: Update ACPI `_STA` method with QOM vCPU ACPI Hotplug states"
qtest: allow ACPI DSDT Table changes
vhost_net: fix assertion triggered by batch of host notifiers processing
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While starting a vhost device, updating iotlb entries
via 'vhost_device_iotlb_miss' may return an error.
qemu-kvm: vhost_device_iotlb_miss:
700871,700871: Fail to update device iotlb
Fail device start when such an error occurs.
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Message-Id: <20241107113247.46532-1-ppandit@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
The size should always be 8 so hard code that. By coincidience the
incorrect use of sizeof(char *) is 8 on 64 bit hosts, but was caught
by CI testing with i686 as the host.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Closes: https://lore.kernel.org/qemu-devel/20241104110025-mutt-send-email-mst@kernel.org/
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20241107123446.902801-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Zero length data for features doesn't make any sense so exclude that case
early. This fixes the undefined behavior reported by coverity for a zero
length memcpy().
Resolves CID 1564900 and 1564901
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20241108175814.1248278-1-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 2d6cfbaf17.
The patch is supposed to be part of ARM CPU hotplug series and has not value
on its own without it. The series however is still in RFC stage and outside
of scope 9.2 release.
On top of that it introduces not needed callback that pokes directly into
CPU state without any need for that. Instead properties and AML generator
option should be used to configure static platform depended vCPU presence
state.
Drop the patch so that corrected version could be posted along with
ARM CPU hotplug series and properly reviewed in relevant context.
That also helps us to keep history cleaner with new patch being
against original code vs a string of fixups on top of current mess.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20241112170258.2996640-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit bf1ecc8dad
which broke cpu hotplug in x86 after migration to older QEMU
Fixes: bf1ecc8dad (w/acpi: Update ACPI `_STA` method with QOM vCPU ACPI Hotplug states)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20241112170258.2996640-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the backend of vhost_net restarts during the vm is running, vhost_net
is stopped and started. The virtio_device_grab_ioeventfd() fucntion in
vhost_net_enable_notifiers() will result in a call to
virtio_bus_set_host_notifier()(assign=false).
And now virtio_device_grab_ioeventfd() is batched in a single transaction
with virtio_bus_set_host_notifier()(assign=true).
This triggers the following assertion:
kvm_mem_ioeventfd_del: error deleting ioeventfd: Bad file descriptor
This patch moves virtio_device_grab_ioeventfd() out of the batch to fix
this problem.
To be noted that the for loop to release ioeventfd should start from i+1,
not i, because the i-th ioeventfd has already been released in
vhost_dev_disable_notifiers_nvqs().
Fixes: 6166799f6 ("vhost_net: configure all host notifiers in a single MR transaction")
Signed-off-by: Zuo Boqun <zuoboqun@baidu.com>
Reported-by: Gao Shiyuan <gaoshiyuan@baidu.com>
Message-Id: <20241115080312.3184-1-zuoboqun@baidu.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The MV64361 has two PCI buses one of which is used for AGP on
PegasosII. So far we only emulated the PCI bus on pci.1 but some
graphics cards are only recognised by some guests when connected to
pci.0 corresponding to the AGP port. So far the interrupts were not
routed from pci.0 so this patch fixes that allowing the use of both
PCI buses. On real board only INTA and INTB are connected for AGP but
to avoid surprises we connect all 4 PCI interrupt lines so pci.0 can
be used for all PCI cards as well.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In case when vcpus are explicitly enabled/disabled in a non-consecutive
order within a libvirt xml, it results in a drc index mismatch during
vcpu hotplug later because the existing logic uses vcpu id to derive the
corresponding drc index which is not correct. Use env->core_index to
derive a vcpu's drc index as appropriate to fix this issue.
For ex, for the given libvirt xml config:
<vcpus>
<vcpu id='0' enabled='yes' hotpluggable='no'/>
<vcpu id='1' enabled='yes' hotpluggable='yes'/>
<vcpu id='2' enabled='no' hotpluggable='yes'/>
<vcpu id='3' enabled='yes' hotpluggable='yes'/>
<vcpu id='4' enabled='no' hotpluggable='yes'/>
<vcpu id='5' enabled='yes' hotpluggable='yes'/>
<vcpu id='6' enabled='no' hotpluggable='yes'/>
<vcpu id='7' enabled='no' hotpluggable='yes'/>
</vcpus>
We see below error on guest console with "virsh setvcpus <domain> 5" :
pseries-hotplug-cpu: CPU with drc index 10000002 already exists
This patch fixes the issue by using correct drc index for explicitly
enabled vcpus during init.
Reported-by: Anushree Mathur <anushree.mathur@linux.vnet.ibm.com>
Tested-by: Anushree Mathur <anushree.mathur@linux.vnet.ibm.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
By convention, xscom regions get a xscom- prefix.
Fixes: 1adf24708b ("hw/ppc: Add pnv nest pervasive common chiplet model")
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The THREAD_SIBLING_FOREACH macro wasn't excluding threads from other
chips. Add chip_index field to the thread state and add a check for the
new field in the macro.
Fixes: b769d4c8f4 ("target/ppc: Add initial flags and helpers for SMT support")
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
[npiggin: set chip_index for spapr too]
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
powernv CPUs have a set of control registers that can stop, start, and
do other things to control a thread's execution.
Using this interface to stop a thread puts it into a particular state
that can be queried, and is distinguishable from other things that might
stop the CPU (e.g., going idle, or being debugged via gdb, or stopped by
the monitor).
Add a new flag that can speficially distinguish this state where it is
stopped with control registers. This solves some hangs when rebooting
powernv machines when skiboot is modified to allow QEMU to use the CPU
control facility (that uses controls to bring all secondaries to a known
state).
Fixes: c889195508 ("ppc/pnv: Implement POWER10 PC xscom registers for direct controls")
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
iQEzBAABCAAdFiEEIV1G9IJGaJ7HfzVi7wSWWzmNYhEFAmdFRyQACgkQ7wSWWzmN
YhFU1Qf/T9bBOCrbQqbZSG7eKk8QuH35zcgNU7FzFTrGeVCc1bUMNYhiioqAFmE+
h5h/3vmkmt+01vaTuimTRumI2SJnFFwggveJDWf+ICSl9MRtCXB5+w0n71vJ6gUO
njm36pIl+aMkZIrsDc7lLewVouZkF8mAKP7mn9x53s5lX/HbXZSdPJmrkdUXtNT5
d3nXlUkNhEWKL9dKIQ9dWYmj3l+tLfuYPiR8a+kKFMEwHlGBuFbNoVN03v5VvFyf
Dmy1P1ZFApP0SsR4SiccXg7C8AslBC6wc7Bhd0aiKpGBnlt20mE9EJSVyrU8yP1p
UTKzzB0QHN7Nnd6AcFRhWvo9C74mGg==
=qP+q
-----END PGP SIGNATURE-----
Merge tag 'net-pull-request' of https://github.com/jasowang/qemu into staging
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEIV1G9IJGaJ7HfzVi7wSWWzmNYhEFAmdFRyQACgkQ7wSWWzmN
# YhFU1Qf/T9bBOCrbQqbZSG7eKk8QuH35zcgNU7FzFTrGeVCc1bUMNYhiioqAFmE+
# h5h/3vmkmt+01vaTuimTRumI2SJnFFwggveJDWf+ICSl9MRtCXB5+w0n71vJ6gUO
# njm36pIl+aMkZIrsDc7lLewVouZkF8mAKP7mn9x53s5lX/HbXZSdPJmrkdUXtNT5
# d3nXlUkNhEWKL9dKIQ9dWYmj3l+tLfuYPiR8a+kKFMEwHlGBuFbNoVN03v5VvFyf
# Dmy1P1ZFApP0SsR4SiccXg7C8AslBC6wc7Bhd0aiKpGBnlt20mE9EJSVyrU8yP1p
# UTKzzB0QHN7Nnd6AcFRhWvo9C74mGg==
# =qP+q
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 26 Nov 2024 03:57:24 GMT
# gpg: using RSA key 215D46F48246689EC77F3562EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* tag 'net-pull-request' of https://github.com/jasowang/qemu:
virtio-net: Add queues before loading them
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Call virtio_net_set_multiqueue() to add queues before loading their
states. Otherwise the loaded queues will not have handlers and elements
in them will not be processed.
Cc: qemu-stable@nongnu.org
Fixes: 8c49756825 ("virtio-net: Add only one queue pair when realizing")
Reported-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
pci_devfn properties accept either a string or an integer as input. To
implement this, set_pci_devfn() first tries to visit the option as a
string, and if that fails, it visits it as an integer instead. While the
QemuOpts visitor happens to accept this, it is invalid according to the
visitor interface. QObject input visitors run into an assertion failure
when this is done.
QObject input visitors are used with the JSON syntax version of -device
on the command line:
$ ./qemu-system-x86_64 -enable-kvm -M q35 -device pcie-pci-bridge,id=pci.1,bus=pcie.0 -blockdev null-co,node-name=disk -device '{ "driver": "virtio-blk-pci", "drive": "disk", "id": "virtio-disk0", "bus": "pci.1", "addr": 1 }'
qemu-system-x86_64: ../qapi/qobject-input-visitor.c:143: QObject *qobject_input_try_get_object(QObjectInputVisitor *, const char *, _Bool): Assertion `removed' failed.
The proper way to accept both strings and integers is using the
alternate mechanism, which tells us the type of the input before it's
visited. With this information, we can directly visit it as the right
type.
This fixes set_pci_devfn() by using the alternate mechanism.
Cc: qemu-stable@nongnu.org
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20241119120353.57812-1-kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
receive_header() used to cast the const qualifier of the pointer to the
received packet away to modify the header. Avoid this by copying the
received header to buffer.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The specification says hash_report should be set to
VIRTIO_NET_HASH_REPORT_NONE if VIRTIO_NET_F_HASH_REPORT is negotiated
but not configured with VIRTIO_NET_CTRL_MQ_RSS_CONFIG. However,
virtio_net_receive_rcu() instead wrote out the content of the extra_hdr
variable, which is not uninitialized in such a case.
Fix this by zeroing the extra_hdr.
Fixes: e22f0603fb ("virtio-net: reference implementation of hash report")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
virtio_net_process_rss() fills the values used for hash reporting, but
the values used to be thrown away with a recursive function call if
the queue changes after RSS. Avoid the function call to keep the values.
Fixes: a4c960eedc ("virtio-net: Do not write hashes to peer buffer")
Buglink: https://issues.redhat.com/browse/RHEL-59572
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
virtio_net_can_receive() checks if the queue is ready, but RSS will
change the queue to use so, strictly speaking, we may still be able to
receive the packet even if the queue initially provided is not ready.
Perform RSS before virtio_net_can_receive() to cover such a case.
Fixes: 4474e37a5b ("virtio-net: implement RX RSS processing")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
work_around_broken_dhclient() accesses IP and UDP headers to detect
relevant packets and to calculate checksums, but it didn't check if
the packet has size sufficient to accommodate them, causing out-of-bound
access hazards. Fix this by correcting the size requirement.
Fixes: 1d41b0c1ec ("Work around dhclient brokenness")
Cc: qemu-stable@nongnu.org
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Coverity reports a possible buffer overrun due to a non-NUL-terminated
string in scsi_property_set_loadparm(). While things are not so easy,
because qdev_prop_sanitize_s390x_loadparm is designed to operate on a
buffer that is not NUL-terminated, in this case the string *does* have
to be NUL-terminated because it is read by scsi_property_get_loadparm
and s390_build_iplb.
Reviewed-by: jrossi@linux.ibm.com
Cc: thuth@redhat.com
Fixes: 429442e52d ("hw: Add "loadparm" property to scsi disk devices for booting on s390x", 2024-11-18)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the loop checking smp cache support, the error message should report
the current cache level and type.
Fix the parameter of error_setg() to ensure it reports the correct cache
level and type.
Resolves: Coverity CID 1565391
Fixes: f35c0221fe ("hw/core: Check smp cache topology support for machine")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20241110150901.130647-3-zhao1.liu@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The caches_bitmap is defined in machine_parse_smp_cache(), but it was
not initialized.
Initialize caches_bitmap by clearing all its bits to zero.
Resolves: Coverity CID 1565389
Fixes: 4e88e7e340 ("qapi/qom: Define cache enumeration and properties for machine")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20241110150901.130647-2-zhao1.liu@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no need for this assertion here, as we only use vmport value
for equality/inequality checks. This was originally prompted by the
following Coverity report:
>>> CID 1559533: Integer handling issues (CONSTANT_EXPRESSION_RESULT)
>>> "pcms->vmport >= 0" is always true regardless of the values of
>>> its operands. This occurs as the logical first operand of "&&".
Signed-off-by: Kamil Szczęk <kamil@szczek.dev>
Reported-By: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/ZwF9ZexNs1h-uC0MrbkgGtMtdyLinROjVSmMNVzNftjGVWgOiuzdD1dSXEtzNH7OHbBFY6GVDYVFIDBgc3lhGqCOb7kaNZolSBkVyl3rNr4=@szczek.dev
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In extioi_setirq() we try to operate on a bit array stored as an
array of uint32_t using the set_bit() and clear_bit() functions
by casting the pointer to 'unsigned long *'.
This has two problems:
* the alignment of 'uint32_t' is less than that of 'unsigned long'
so we pass an insufficiently aligned pointer, which is
undefined behaviour
* on big-endian hosts the 64-bit 'unsigned long' will have
its two halves the wrong way around, and we will produce
incorrect results
The undefined behaviour is shown by the clang undefined-behaviour
sanitizer when running the loongarch64-virt functional test:
/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/qemu/bitops.h:41:5: runtime error: store to misaligned address 0x555559745d9c for type 'unsigned long', which requires 8 byte alignment
0x555559745d9c: note: pointer points here
ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
^
#0 0x555556fb81c4 in set_bit /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/qemu/bitops.h:41:9
#1 0x555556fb81c4 in extioi_setirq /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/clang/../../hw/intc/loongarch_extioi.c:65:9
#2 0x555556fb6e90 in pch_pic_irq_handler /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/clang/../../hw/intc/loongarch_pch_pic.c:75:5
#3 0x555556710265 in serial_ioport_write /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/clang/../../hw/char/serial.c
Fix these problems by using set_bit32() and clear_bit32(),
which work with bit arrays stored as an array of uint32_t.
Cc: qemu-stable@nongnu.org
Fixes: cbff2db1e9 ("hw/intc: Add LoongArch extioi interrupt controller(EIOINTC)")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-id: 20241108135514.4006953-4-peter.maydell@linaro.org
Current watchdog is free running out of reset, this combined with the
fact that current implementation also ensures the counter is running
when programing WDOGLOAD creates issues when the firmware defer the
programing of WDOGCONTROL.INTEN much later after WDOGLOAD. Arm
Programmer's Model documentation states that INTEN is also the
counter enable:
> INTEN
>
> Enable the interrupt event, WDOGINT. Set HIGH to enable the counter
> and the interrupt, or LOW to disable the counter and interrupt.
> Reloads the counter from the value in WDOGLOAD when the interrupt
> is enabled, after previously being disabled.
Source of the time of writing:
https://developer.arm.com/documentation/ddi0479/d/apb-components/apb-watchdog/programmers-model
Signed-off-by: Roque Arcudia Hernandez <roqueh@google.com>
Reviewed-by: Stephen Longfield <slongfield@google.com>
Reviewed-by: Joe Komlodi <komlodi@google.com>
Message-id: 20241115160328.1650269-3-roqueh@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The clang sanitizer complains about the code in the EOI handling
of openpic_cpu_write_internal():
UBSAN_OPTIONS=halt_on_error=1:abort_on_error=1 ./build/clang/qemu-system-ppc -M mac99,graphics=off -display none -kernel day15/invaders.elf
../../hw/intc/openpic.c:1034:16: runtime error: index -1 out of bounds for type 'IRQSource[264]' (aka 'struct IRQSource[264]')
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior ../../hw/intc/openpic.c:1034:16 in
This is because we do
src = &opp->src[n_IRQ];
when n_IRQ may be -1. This is in practice harmless because if n_IRQ
is -1 then we don't do anything with the src pointer, but it is
undefined behaviour. (This has been present since this device
was first added to QEMU.)
Rearrange the code so we only do the array index when n_IRQ is not -1.
Cc: qemu-stable@nongnu.org
Fixes: e9df014c0b ("Implement embedded IRQ controller for PowerPC 6xx/740 & 75")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 20241105180205.3074071-1-peter.maydell@linaro.org
of_dpa_cmd_add_acl_ip() is called from a single place, and despite the
fact that it always returns ROCKER_OK, its return value is still checked
by the caller.
Change of_dpa_cmd_add_acl_ip() to return void and remove the superfluous
check from of_dpa_cmd_add_acl().
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2471
Signed-off-by: Rodrigo Dias Correa <r@drigo.nl>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Message-id: 20241114075051.404284-1-r@drigo.nl
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The product "icnto * s->tcntb" may overflow uint32_t.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Frolov <frolov@swemel.ru>
Message-id: 20241106083801.219578-2-frolov@swemel.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Provide a "loadparm" property for scsi-hd & scsi-cd devices on s390x
(required for the "boot order" feature)
* Fix the floating-point multiply-and-add NaN rules on s390x
* Raise timeout on cross-accel build jobs to 60m
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmc7ercRHHRodXRoQHJl
ZGhhdC5jb20ACgkQLtnXdP5wLbVjyg//ZuhSDCj+oBSU6vwM7Lwh3CS6GwZvGECU
h60V3tizKypiRNtTJRXHoWcx95brXmoZgI+QQhDEXe3fFLkOEKT6AIlDhrKZRUsd
rpLPr6O8TVKO+rSE7JVJAP3X1tpOOQDxnq83uWBv53b0S+Da0VwDRtI9gcugRMmh
d58P8Q1bV344fQdcrebejstpSUG7RxSA4Plj2uSQx4mSHT7cy/hN+vA34Ha7reE3
tcN9yfQq3Rmfvt0MV5I9Umd6JXEoDlEAwjSNsWRsCzo69jBZwiMtXSH8LyLtwRTp
C919G/MIRuhvImF74dStLVCr82sNq54YR1NP6CGcmqPH76FOH8Mx3vmx9Cxj9ckA
6NI6SvIg++bW2O1efG2apz8p5fjbDzYXSAbHnaWTcEu3gPgH4PQ5QXoyKaDymvWV
JIh5/gXEy+twEXgIBsdWQ44A9E06lL/tNfKnqGdXK4ZYF2JIrI+Lq7AKBee7tebP
+72I4PljHLSHQ3GxdkoOeJ8ahu70IBdSz2/VEIwOWK1wIf5C5WFNBerLJyDmkyx8
xIvIm0vlRLwPcuOC711nlaMaKqTNT+8W4DIqIY6fHs2Jy0psMdgey1uHQxYEj9Kh
fg7CvalK8n3MkGAwTqAvRJIwMFe0a4Ss6c6CaemSaYa38ud/pCNnv+IT+Eqr+mjq
6y5PZWNrZi0=
=UaDH
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-11-18' of https://gitlab.com/thuth/qemu into staging
* Fixes & doc updates for the new "boot order" s390x bios feature
* Provide a "loadparm" property for scsi-hd & scsi-cd devices on s390x
(required for the "boot order" feature)
* Fix the floating-point multiply-and-add NaN rules on s390x
* Raise timeout on cross-accel build jobs to 60m
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmc7ercRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbVjyg//ZuhSDCj+oBSU6vwM7Lwh3CS6GwZvGECU
# h60V3tizKypiRNtTJRXHoWcx95brXmoZgI+QQhDEXe3fFLkOEKT6AIlDhrKZRUsd
# rpLPr6O8TVKO+rSE7JVJAP3X1tpOOQDxnq83uWBv53b0S+Da0VwDRtI9gcugRMmh
# d58P8Q1bV344fQdcrebejstpSUG7RxSA4Plj2uSQx4mSHT7cy/hN+vA34Ha7reE3
# tcN9yfQq3Rmfvt0MV5I9Umd6JXEoDlEAwjSNsWRsCzo69jBZwiMtXSH8LyLtwRTp
# C919G/MIRuhvImF74dStLVCr82sNq54YR1NP6CGcmqPH76FOH8Mx3vmx9Cxj9ckA
# 6NI6SvIg++bW2O1efG2apz8p5fjbDzYXSAbHnaWTcEu3gPgH4PQ5QXoyKaDymvWV
# JIh5/gXEy+twEXgIBsdWQ44A9E06lL/tNfKnqGdXK4ZYF2JIrI+Lq7AKBee7tebP
# +72I4PljHLSHQ3GxdkoOeJ8ahu70IBdSz2/VEIwOWK1wIf5C5WFNBerLJyDmkyx8
# xIvIm0vlRLwPcuOC711nlaMaKqTNT+8W4DIqIY6fHs2Jy0psMdgey1uHQxYEj9Kh
# fg7CvalK8n3MkGAwTqAvRJIwMFe0a4Ss6c6CaemSaYa38ud/pCNnv+IT+Eqr+mjq
# 6y5PZWNrZi0=
# =UaDH
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 18 Nov 2024 17:34:47 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-11-18' of https://gitlab.com/thuth/qemu:
.gitlab-ci.d: Raise timeout on cross-accel build jobs to 60m
pc-bios: Update the s390 bios images with the recent fixes
pc-bios/s390-ccw: Re-initialize receive queue index before each boot attempt
pc-bios/s390x: Initialize machine loadparm before probing IPL devices
pc-bios/s390x: Initialize cdrom type to false for each IPL device
hw: Add "loadparm" property to scsi disk devices for booting on s390x
hw/s390x: Restrict "loadparm" property to devices that can be used for booting
docs/system/bootindex: Make it clear that s390x can also boot from virtio-net
docs/system/s390x/bootdevices: Update loadparm documentation
tests/tcg/s390x: Add the floating-point multiply-and-add test
target/s390x: Fix the floating-point multiply-and-add NaN rules
hw/usb: Use __attribute__((packed)) vs __packed
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While adding the new flexible boot order feature on s390x recently,
we missed to add the "loadparm" property to the scsi-hd and scsi-cd
devices. This property is required on s390x to pass the information
to the boot loader about which kernel should be started or whether
the boot menu should be shown. But even more serious: The missing
property is now causing trouble with the corresponding libvirt patches
that assume that the "loadparm" property is either settable for all
bootable devices (when the "boot order" feature is implemented in
QEMU), or none (meaning the behaviour of older QEMUs that only allowed
one "loadparm" at the machine level). To fix this broken situation,
let's implement the "loadparm" property in for the SCSI devices, too.
Message-ID: <20241115141202.1877294-1-thuth@redhat.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The patch changes the comments to point to the latest Design Kit
Technical Reference Manual.
Signed-off-by: Roque Arcudia Hernandez <roqueh@google.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241115160328.1650269-2-roqueh@google.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In virtio-net.c we assume that the IP length field in the packet is
aligned, and we copy its address into a uint16_t* in the
VirtioNetRscUnit struct which we then dereference later. This isn't
a safe assumption; it will also result in compilation failures if we
mark the ip_header struct as QEMU_PACKED because the compiler will
not let you take the address of an unaligned struct field.
Make the ip_plen field in VirtioNetRscUnit a void*, and make all the
places where we read or write through that pointer instead use some
new accessor functions read_unit_ip_len() and write_unit_ip_len()
which account for the pointer being potentially unaligned and also do
the network-byte-order conversion we were previously using htons() to
perform.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241114141619.806652-2-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
When SET_STREAM_FORMAT is called, the st->buft timer is overwritten, thus
causing a memory leak. This was originally fixed in commit 816139ae6a5
("hw/audio/hda: fix memory leak on audio setup", 2024-11-14) but that
caused the audio to break in SPICE.
Fortunately, a simpler fix is possible. The timer only needs to be
reset, because the callback is always the same (st->output is set at
realize time in hda_audio_init); call to timer_new_ns overkill. Replace
it with timer_del and only initialize the timer once; for simplicity,
do it even if use_timer is false.
An even simpler fix would be to free the old time in hda_audio_setup().
However, it seems better to place the initialization of the timer close
to that of st->ouput.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20241114125318.1707590-3-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This reverts commit 6d03242a7e47815ed56687ecd13f683d8da3f2fe,
which causes SPICE audio to break. While arguably this is a SPICE bug,
it is possible to fix the leak in a less heavy-handed way.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2639
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20241114125318.1707590-2-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The ClearPortFeature control message fails for PORT_POWER because there
is no break; at the end of the case statement, causing it to fall through
to the failure handler. Add the missing break; to solve the problem.
Fixes: 1cc403eb21 ("usb-hub: emulate per port power switching")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241112170152.217664-11-linux@roeck-us.net>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Coverity reports (CID 1564769, 1564770) that we potentially overflow
by doing some 32x32 multiplies for something that ends up in a 64 bit
value. Fix this by first using stride for all lines and casting input
to uint64_t to ensure a 64 bit multiply is used.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-ID: <20241111230040.68470-3-alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
There are two identical sequences of a code doing the same thing that
raise warnings with Coverity. Before fixing those issues lets factor
out the common code into a helper function we can share.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-ID: <20241111230040.68470-2-alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In x86_load_linux(), we were using a stack-allocated array as data for
fw_cfg_add_bytes(). Since the latter just takes a reference to the
pointer instead of copying the data, it can happen that the contents
have been overridden by the time the guest attempts to access them.
Instead of using the stack-allocated array, allocate some memory from
the heap, copy the contents of the array, and use it for fw_cfg.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241109053748.13183-1-slp@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The BIT_MASK() macro from bitops.h provides the mask of a bit
within a particular word of a multi-word bit array; it is intended
to be used with its counterpart BIT_WORD() that gives the index
of the word in the array.
In nrf51_rng we are using it for cases where we have a bit number
that we know is the index of a bit within a single word (in fact, it
happens that all the bit numbers we pass to it are zero). This
happens to give the right answer, but the macro that actually
does the job we want here is BIT().
Use BIT() instead of BIT_MASK().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241108135644.4007151-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Commit bb185de423 ("s390x: Add individual loadparm assignment to
CCW device") added a "loadparm" property to all CCW devices. This
was a little bit unfortunate, since this property is only useful
for devices that can be used for booting, but certainly it is not
useful for devices like virtio-gpu or virtio-tablet.
Thus let's restrict the property to CCW devices that we can boot from
(i.e. virtio-block, virtio-net and vfio-ccw devices).
Message-ID: <20241113114741.681096-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jared Rossi <jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When commit 96b7af4388 intoduced a .instance_finalize() handler,
it did not take into account that the container was not necessarily
inserted into the container list of the address space. Hence, if
the container object is destroyed, by calling object_unref() for
example, before vfio_address_space_insert() is called, QEMU may
crash when removing the container from the list as done in
vfio_container_instance_finalize(). This was seen with an SEV-SNP
guest for which discarding of RAM fails.
To resolve this issue, use the safe version of QLIST_REMOVE().
Cc: Zhenzhong Duan <zhenzhong.duan@intel.com>
Cc: Eric Auger <eric.auger@redhat.com>
Fixes: 96b7af4388 ("vfio/container: Move vfio_container_destroy() to an instance_finalize() handler")
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
When copying the calculation of the stolen memory size for Intels integrated
graphics device of gen 9 and later from the Linux kernel [1], we missed
subtracting 0xf0 from the graphics mode select value for values above 0xf0.
This leads to QEMU reporting a very large size of the graphics stolen memory
area. That's just a waste of memory. Additionally the guest firmware might be
unable to allocate such a large buffer.
[1] 7c626ce4ba/arch/x86/kernel/early-quirks.c (L455-L460)
Signed-off-by: Corvin Köhne <c.koehne@beckhoff.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Fixes: 8719224166 ("vfio/igd: correctly calculate stolen memory size for gen 9 and later")
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
[ clg: Changed commit subject ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
I've tested and verified that Coffee Lake devices are working properly.
Signed-off-by: Corvin Köhne <c.koehne@beckhoff.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
The 'isapc' machine type has no PCI bus, but pc_nic_init() still
calls pci_init_nic_devices() passing it a NULL bus pointer. This
causes the clang sanitizer to complain:
$ ./build/clang/qemu-system-i386 -M isapc
../../hw/pci/pci.c:1866:39: runtime error: member access within null pointer of type 'PCIBus' (aka 'struct PCIBus')
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior ../../hw/pci/pci.c:1866:39 in
This is because pci_init_nic_devices() does
&bus->qbus
which is undefined behaviour on a NULL pointer even though we're not
actually dereferencing the pointer. (We don't actually crash as
a result, so if you aren't running a sanitizer build then there
are no user-visible effects.)
Make pc_nic_init() avoid trying to initialize PCI NICs on a non-PCI
system.
Cc: qemu-stable@nongnu.org
Fixes: 8d39f9ba14 ("hw/i386/pc: use qemu_get_nic_info() and pci_init_nic_devices()")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Link: https://lore.kernel.org/r/20241105171813.3031969-1-peter.maydell@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Christian Schoenebeck