This function is used by TCGCPUOps, and is thus TCG specific.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210621125115.67717-10-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Create one common dispatch for all of the ppc_*_xlate functions.
Use ppc64_v3_radix to directly dispatch between ppc_radix64_xlate
and ppc_hash64_xlate.
Remove the separate *_handle_mmu_fault and *_get_phys_page_debug
functions, using common code for ppc_cpu_tlb_fill and
ppc_cpu_get_phys_page_debug.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210621125115.67717-9-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mirror the interface of ppc_radix64_xlate (mostly), putting all
of the logic for older mmu translation into a single entry point.
For booke, we need to add mmu_idx to the xlate-style interface.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210621125115.67717-8-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mirror the interface of ppc_radix64_xlate, putting all of
the logic for hash32 translation into a single entry point.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210621125115.67717-7-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mirror the interface of ppc_radix64_xlate, putting all of
the logic for hash64 translation into a single function.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210621125115.67717-6-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead of returning non-zero for failure, return true for success.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210621125115.67717-5-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This removes some incomplete duplication between
ppc_radix64_handle_mmu_fault and ppc_radix64_get_phys_page_debug.
The former was correct wrt SPR_HRMOR and the latter was not.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210621125115.67717-4-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These changes were waiting until we didn't need to match
the function type of PowerPCCPUClass.handle_mmu_fault.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210621125115.67717-3-bruno.larsen@eldorado.org.br>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead, use a switch on env->mmu_model. This avoids some
replicated information in cpu setup.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210621125115.67717-2-bruno.larsen@eldorado.org.br>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU reserves space for RTAS via /rtas/rtas-size which tells the client
how much space the RTAS requires to work which includes the RTAS binary
blob implementing RTAS runtime. Because pseries supports FWNMI which
requires plenty of space, QEMU reserves more than 2KB which is
enough for the RTAS blob as it is just 20 bytes (under QEMU).
Since FWNMI reset delivery was added, RTAS_SIZE macro is not used anymore.
This replaces RTAS_SIZE with RTAS_MIN_SIZE and uses it in
the /rtas/rtas-size calculation to account for the RTAS blob.
Fixes: 0e236d3477 ("ppc/spapr: Implement FWNMI System Reset delivery")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20210622070336.1463250-1-aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This isn't used anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210622140926.677618-3-groug@kaod.org>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
PowerPC CPUs use big endian by default but starting with POWER7,
server grade CPUs use the ILE bit of the LPCR special purpose
register to decide on the endianness to use when handling
interrupts. This gives a clue to QEMU on the endianness the
guest kernel is running, which is needed when generating an
ELF dump of the guest or when delivering an FWNMI machine
check interrupt.
Commit 382d2db62b ("target-ppc: Introduce callback for interrupt
endianness") added a class method to PowerPCCPUClass to modelize
this : default implementation returns a fixed "big endian" value,
while POWER7 and newer do the LPCR_ILE check. This is suboptimal
as it forces to implement the method for every new CPU family, and
it is very unlikely that this will ever be different than what we
have today.
We basically only have three cases to consider:
a) CPU doesn't have an LPCR => big endian
b) CPU has an LPCR but doesn't support the ILE bit => big endian
c) CPU has an LPCR and supports the ILE bit => little or big endian
Instead of class methods, introduce an inline helper that checks the
ILE bit in the LPCR_MASK to decide on the outcome. The new helper
words little endian instead of big endian. This allows to drop a !
operator in ppc_cpu_do_fwnmi_machine_check().
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210622140926.677618-2-groug@kaod.org>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We support coordinated discarding of RAM using the RamDiscardManager for
the VFIO_TYPE1 iommus. Let's unlock support for coordinated discards,
keeping uncoordinated discards (e.g., via virtio-balloon) disabled if
possible.
This unlocks virtio-mem + vfio on x86-64. Note that vfio used via "nvme://"
by the block layer has to be implemented/unlocked separately. For now,
virtio-mem only supports x86-64; we don't restrict RamDiscardManager to
x86-64, though: arm64 and s390x are supposed to work as well, and we'll
test once unlocking virtio-mem support. The spapr IOMMUs will need special
care, to be tackled later, e.g.., once supporting virtio-mem.
Note: The block size of a virtio-mem device has to be set to sane sizes,
depending on the maximum hotplug size - to not run out of vfio mappings.
The default virtio-mem block size is usually in the range of a couple of
MBs. The maximum number of mapping is 64k, shared with other users.
Assume you want to hotplug 256GB using virtio-mem - the block size would
have to be set to at least 8 MiB (resulting in 32768 separate mappings).
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-14-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We implement the RamDiscardManager interface and only require coordinated
discarding of RAM to work.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-13-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We want to separate the two cases whereby we discard ram
- uncoordinated: e.g., virito-balloon
- coordinated: e.g., virtio-mem coordinated via the RamDiscardManager
Reviewed-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-12-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We have users in migration context that don't hold the BQL (when
finishing migration). To prepare for further changes, use a dedicated mutex
instead of atomic operations. Keep using qatomic_read ("READ_ONCE") for the
functions that only extract the current state (e.g., used by
virtio-balloon), locking isn't necessary.
While at it, split up the counter into two variables to make it easier
to understand.
Suggested-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-11-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
vIOMMU support works already with RamDiscardManager as long as guests only
map populated memory. Both, populated and discarded memory is mapped
into &address_space_memory, where vfio_get_xlat_addr() will find that
memory, to create the vfio mapping.
Sane guests will never map discarded memory (e.g., unplugged memory
blocks in virtio-mem) into an IOMMU - or keep it mapped into an IOMMU while
memory is getting discarded. However, there are two cases where a malicious
guests could trigger pinning of more memory than intended.
One case is easy to handle: the guest trying to map discarded memory
into an IOMMU.
The other case is harder to handle: the guest keeping memory mapped in
the IOMMU while it is getting discarded. We would have to walk over all
mappings when discarding memory and identify if any mapping would be a
violation. Let's keep it simple for now and print a warning, indicating
that setting RLIMIT_MEMLOCK can mitigate such attacks.
We have to take care of incoming migration: at the point the
IOMMUs get restored and start creating mappings in vfio, RamDiscardManager
implementations might not be back up and running yet: let's add runstate
priorities to enforce the order when restoring.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-10-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Although RamDiscardManager can handle running into the maximum number of
DMA mappings by propagating errors when creating a DMA mapping, we want
to sanity check and warn the user early that there is a theoretical setup
issue and that virtio-mem might not be able to provide as much memory
towards a VM as desired.
As suggested by Alex, let's use the number of KVM memory slots to guess
how many other mappings we might see over time.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-9-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Let's query the maximum number of possible DMA mappings by querying the
available mappings when creating the container (before any mappings are
created). We'll use this informaton soon to perform some sanity checks
and warn the user.
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-8-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Implement support for RamDiscardManager, to prepare for virtio-mem
support. Instead of mapping the whole memory section, we only map
"populated" parts and update the mapping when notified about
discarding/population of memory via the RamDiscardListener. Similarly, when
syncing the dirty bitmaps, sync only the actually mapped (populated) parts
by replaying via the notifier.
Using virtio-mem with vfio is still blocked via
ram_block_discard_disable()/ram_block_discard_require() after this patch.
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-7-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Let's properly notify when (un)plugging blocks, after discarding memory
and before allowing the guest to consume memory. Handle errors from
notifiers gracefully (e.g., no remaining VFIO mappings) when plugging,
rolling back the change and telling the guest that the VM is busy.
One special case to take care of is replaying all notifications after
restoring the vmstate. The device starts out with all memory discarded,
so after loading the vmstate, we have to notify about all plugged
blocks.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-6-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Any errors are unexpected and ram_block_discard_range() already properly
prints errors. Let's stop manually reporting errors.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-5-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Let's factor out the core logic, no need to replicate.
Reviewed-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-4-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In case one wants to create a permanent copy of a MemoryRegionSections,
one needs access to flatview_ref()/flatview_unref(). Instead of exposing
these, let's just add helpers to copy/free a MemoryRegionSection and
properly adjust references.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-3-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We have some special RAM memory regions (managed by virtio-mem), whereby
the guest agreed to only use selected memory ranges. "unused" parts are
discarded so they won't consume memory - to logically unplug these memory
ranges. Before the VM is allowed to use such logically unplugged memory
again, coordination with the hypervisor is required.
This results in "sparse" mmaps/RAMBlocks/memory regions, whereby only
coordinated parts are valid to be used/accessed by the VM.
In most cases, we don't care about that - e.g., in KVM, we simply have a
single KVM memory slot. However, in case of vfio, registering the
whole region with the kernel results in all pages getting pinned, and
therefore an unexpected high memory consumption - discarding of RAM in
that context is broken.
Let's introduce a way to coordinate discarding/populating memory within a
RAM memory region with such special consumers of RAM memory regions: they
can register as listeners and get updates on memory getting discarded and
populated. Using this machinery, vfio will be able to map only the
currently populated parts, resulting in discarded parts not getting pinned
and not consuming memory.
A RamDiscardManager has to be set for a memory region before it is getting
mapped, and cannot change while the memory region is mapped.
Note: At some point, we might want to let RAMBlock users (esp. vfio used
for nvme://) consume this interface as well. We'll need RAMBlock notifier
calls when a RAMBlock is getting mapped/unmapped (via the corresponding
memory region), so we can properly register a listener there as well.
Reviewed-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-2-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
It turns out you push down in one place and failures pop-up elsewhere.
Especially on CI. Disable for now for all targets.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are going to move this code, fix its style first.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210704183755.655002-12-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We are going to move this code, fix its style first.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210704183755.655002-7-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Linux kernel defines EWOULDBLOCK as EAGAIN (since before v2.6.12-rc2).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210704183755.655002-4-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Linux kernel defines EWOULDBLOCK as EAGAIN (since before v2.6.12-rc2).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210704183755.655002-3-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Linux kernel defines EWOULDBLOCK as EAGAIN (since before v2.6.12-rc2).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210704183755.655002-2-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Set I, M, A, F, D and C bit for hwcap if misa is set.
Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210706035015.122899-1-kito.cheng@sifive.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch adds entry for the vhost-user-rng related files.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Message-Id: <20210614202842.581640-6-mathieu.poirier@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is not safe to pretend that emulated NVDIMM supports
persistence while backend actually failed to enable it
and used non-persistent mapping as fall back.
Instead of falling-back, QEMU should be more strict and
error out with clear message that it's not supported.
So if user asks for persistence (pmem=on), they should
store backing file on NVDIMM.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210111203332.740815-1-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Having properties registered conditionally makes QOM type
introspection difficult. Instead of skipping registration of the
"instanceid" property, always register the property but validate
its value against the instance id required by the class.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <20201009200701.1830060-1-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
backend_defaults property allow users to control if default block
properties should be decided with backend information.
If it is off, any backend information will be discarded, which is
suitable if you plan to perform live migration to a different disk backend.
If it is on, a block device may utilize backend information more
aggressively.
By default, it is auto, which uses backend information for block
sizes and ignores the others, which is consistent with the older
versions.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-id: 20210705130458.97642-2-akihiko.odaki@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* Generalize XSAVE area offset so that it matches AMD processors on KVM
* Improvements for -display and deprecation of -no-quit
* Enable SMP configuration as a compound machine property ("-M smp.cpus=...")
* Haiku compilation fix
* Add icon on Darwin
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmDkB7sUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOISgf+Nn5BiXQRY52DK/2PoG330F6UeOcp
kWFAE4k4qEktDiCcd5xKekiUd7h+TiRS8bLeycmRtiSXvbzXioE2eCelui0SZDQl
zpIb8wV2WaxrD/zUYPV7r5n+VFAaTCm9lUEzzqnwaThBG/Oat45gnossZEIWv85g
KtQMsSh3pc+KpTjWbIA8V01ohzwFE2q7cA9CB/pDgR3h8M5p4K0ZdaPoAO2auhvu
2sbu9oBl1JwqpIhPme9JR6Je5fMCILBRlXTvPgJ/0iaGdxcNmZxoflO/TZVFB1pl
tUiCu0GB0yEasMO1E6+cP7ezhm15Lz3vKqjr/boV5Y9osfU36k9xkLTvAg==
=itIm
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging
* More Meson test conversions and configure cleanups
* Generalize XSAVE area offset so that it matches AMD processors on KVM
* Improvements for -display and deprecation of -no-quit
* Enable SMP configuration as a compound machine property ("-M smp.cpus=...")
* Haiku compilation fix
* Add icon on Darwin
# gpg: Signature made Tue 06 Jul 2021 08:35:23 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream: (40 commits)
config-host.mak: remove unused compiler-related lines
Set icon for QEMU binary on Mac OS
qemu-option: remove now-dead code
machine: add smp compound property
vl: switch -M parsing to keyval
keyval: introduce keyval_parse_into
keyval: introduce keyval_merge
qom: export more functions for use with non-UserCreatable objects
configure: convert compiler tests to meson, part 6
configure: convert compiler tests to meson, part 5
configure: convert compiler tests to meson, part 4
configure: convert compiler tests to meson, part 3
configure: convert compiler tests to meson, part 2
configure: convert compiler tests to meson, part 1
configure: convert HAVE_BROKEN_SIZE_MAX to meson
configure, meson: move CONFIG_IVSHMEM to meson
meson: store dependency('threads') in a variable
meson: sort existing compiler tests
configure, meson: convert libxml2 detection to meson
configure, meson: convert liburing detection to meson
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Most of the build is not done via Makefiles, therefore the toolchain
variables are mostly unused. They are still used by tests/tcg
and pc-bios/roms, but most of them are not needed there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before switching the build system over to Meson, an icon was
added to the QEMU binary on Mac OS. This patch adds back that
feature; it piggybacks on the existing scripts/entitlement.sh,
which already does in-place changes to the executable on Darwin.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-Id: <20210705195328.36442-1-programmingkidx@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-M was the sole user of qemu_opts_set and qemu_opts_set_defaults,
remove them and the arguments that they used.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make -smp syntactic sugar for a compound property "-machine
smp.{cores,threads,cpu,...}". machine_smp_parse is replaced by the
setter for the property.
numa-test will now cover the new syntax, while other tests
still use -smp.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fabiano Rosas