Add an additional test to further exercise the IOMMU where we attempt to
initialize the command, fault and page-request queues.
These steps are taken from chapter 6.2 of the RISC-V IOMMU spec,
"Guidelines for initialization". It emulates what we expect from the
software/OS when initializing the IOMMU.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241016204038.649340-12-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
To test the RISC-V IOMMU emulation we'll use its PCI representation.
Create a new 'riscv-iommu-pci' libqos device that will be present with
CONFIG_RISCV_IOMMU. This config is only available for RISC-V, so this
device will only be consumed by the RISC-V libqos machine.
Start with basic tests: a PCI sanity check and a reset state register
test. The reset test was taken from the RISC-V IOMMU spec chapter 5.2,
"Reset behavior".
More tests will be added later.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241016204038.649340-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Change all related docs and tests to use the new 'reconnect-ms' option
instead of the now deprecated 'reconnect'.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Do the same thing we already did for chardev in c8e2b6b4d7, and
introduce a new 'reconnect-ms' option to make it possible to specify
sub-second timeouts. This also changes the related documentaion and
tests to use reconnect-ms as well.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
* Fixed GPIO interrupt status when in index mode
* Added GPIO support for the AST2700 SoC and specific test cases
* Fixed crypto controller (HACE) Accumulative hash function
* Converted Aspeed machine avocado tests to the new functional
framework. SDK tests still to be addressed.
* Fixed issue in the SSI controller when doing writes in user mode
* Added support for the WRSR2 register of Winbond flash devices
* Added SFDP table for the Windbond w25q80bl flash device
* Changed flash device models for the ast1030-a1 EVB
-----BEGIN PGP SIGNATURE-----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=DqCH
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20241024' of https://github.com/legoater/qemu into staging
aspeed queue:
* Fixed GPIO interrupt status when in index mode
* Added GPIO support for the AST2700 SoC and specific test cases
* Fixed crypto controller (HACE) Accumulative hash function
* Converted Aspeed machine avocado tests to the new functional
framework. SDK tests still to be addressed.
* Fixed issue in the SSI controller when doing writes in user mode
* Added support for the WRSR2 register of Winbond flash devices
* Added SFDP table for the Windbond w25q80bl flash device
* Changed flash device models for the ast1030-a1 EVB
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmcZ6MIACgkQUaNDx8/7
# 7KFQPA//RTxi1PmCDlzd1ffzMWEadD3CpGLJ4RgEeZpNtkx6IF2uFFBdlNgjTSmD
# B8FdIOVb8qo2omXahKIVIgoKbGgn3U3jciH67D/x4Jyp8IhW6n5XwZzKNJ7kLVHX
# IluGmlvqNumSKl3vxsLvprC0ojRiO/SfWkzS6VOwoFPM7uNDTybQicWBBoy3Jh3e
# VVlMwIeKHMQVJGpI8PQbtnFZO4HaMqWwlo0EoIJji59fdyWULLvrXzH9YhzwFVjQ
# oCNvJUBLfxLse7c13cm/LuNmw+IQtLC5OztsOOtv1XZ1MruhJ7t316eGsQEpeWcD
# Yy5RK4mIBJMExu9oxcKOqgSznQSgenvNGWg6Z9FyyKGciylafnE8GeT35WObumyD
# v9gzgeLcw5DgvDgQXaYi4IkKyezaHoE3HPbFdBEZHBt8tn5pPGmXM0lEWL5xQ5B8
# h6HphjxIlFxeHIxYenLJowLBMOt8aFXzGboF2XCLrx19OC2zvoo7klCbFeAfZpvQ
# JMXP+GsQIe7fnBMbyXGrJh9q+/7tKR4ivtTV/vnSF0FPtyzxdoSrYsUA4SZqSWvI
# ONz62p+zlE/oXBUIaFnC2Ea41YwJ7mDbmcSU1dFxmE0xRVmoYlUocoeS2VOUmTH0
# CMgEcmMXQG0vx8nipQbScbuWRCBlf0YwJ7Y7stgI8HabmsMMbIg=
# =DqCH
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 24 Oct 2024 07:27:14 BST
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [full]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [full]
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20241024' of https://github.com/legoater/qemu:
test/qtest/aspeed_smc-test: Fix coding style
hw/arm/aspeed: Correct fmc_model w25q80bl for ast1030-a1 EVB
hw/arm/aspeed: Correct spi_model w25q256 for ast1030-a1 EVB.
hw/block/m25p80: Add SFDP table for w25q80bl flash
hw/block:m25p80: Support write status register 2 command (0x31) for w25q01jvq
hw/block:m25p80: Fix coding style
aspeed/smc: Fix write incorrect data into flash in user mode
tests/functional: Convert most Aspeed machine tests
hw/misc/aspeed_hace: Fix SG Accumulative hashing
tests/qtest:ast2700-gpio-test: Add GPIO test case for AST2700
aspeed/soc: Support GPIO for AST2700
aspeed/soc: Correct GPIO irq 130 for AST2700
hw/gpio/aspeed: Add AST2700 support
hw/gpio/aspeed: Fix clear incorrect interrupt status for GPIO index mode
hw/gpio/aspeed: Support different memory region ops
hw/gpio/aspeed: Support to set the different memory size
hw/gpio/aspeed: Fix coding style
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix coding style issues from checkpatch.pl
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Add GPIO test cases to test output and input pins from A0 to D7 for AST2700.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[ clg: - Updated MAINTAINERS ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add two new qtests to verify that a valid IPL device can successfully boot after
failed IPL attempts from one or more invalid devices.
cdrom-test/as-fallback-device: Defines the primary boot target as a device that
is invalid for IPL and a second boot target that is valid for IPL. Ensures that
the valid device will be selected after the initial failed IPL.
cdrom-test/as-last-option: Defines the maximum number of boot devices (8)
where only the final entry in the boot order is valid. Ensures that a valid
device will be selected even after multiple failed IPL attempts from both
virtio-blk and virtio-scsi device types.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-20-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Update the OpenBSD CI image to OpenBSD v7.6
* Bump timeout of the ide-test
* New maintainer for the QTests
* Disable the pci-bridge on s390x by default
-----BEGIN PGP SIGNATURE-----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=DJf9
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-10-21' of https://gitlab.com/thuth/qemu into staging
* Convert most Tuxrun Avocado tests to the new functional framework
* Update the OpenBSD CI image to OpenBSD v7.6
* Bump timeout of the ide-test
* New maintainer for the QTests
* Disable the pci-bridge on s390x by default
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmcWfCgRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbV6kQ//YwRebyA192IBM+XQK5YYmguieHmWxV8J
# fZf0a1dWN8oiT3jzI48YWttiU9P6AMa/dwiuepVl4G9+d+w1c3RhS6kQqJljNbDb
# NGw+LVZZcwY1FJpEsEwbDfePkugYHmNXUU672kxz3I8bv/8NmLDc7R3cI5U/7+SP
# N4lxVM6Hd3XZZdc+O2S8En20E1oAJ6IvJwwhCqjLlT36Ez8P69KQhE0V8MtLnrBg
# FsXZuzmaxt/ZDMhTsiHNl6f7N1oD7Y2TPJrdq7V2aihpDA+zx0RlvBPpzD98ZgeS
# PtdkqjL63B5S3RL4fjJUSb/gbL4oChQ5TZDb2Dfw7Q5qPMZ1cgeJLBwdzHZEZrzF
# RTtn4fObYUqtRF3M0Ha4xXc8odSzJTV2fvpSVXcljG1E4AMcD6CMK0E472XbhkMS
# txZHW+C/IDVJ4OoSncrH8ybi1JasEqJZ0YaPfb+aTsPV058b65l+0jQJtlxLoTIf
# p5LluL3exwr0sS3Aq5tcV3pNITtCv1FkcUk7So8sohO2OLQtC9QA300CSXna8XhQ
# OxgRA1c3HXw23MTJKSWjseDIt1bajvBu+cr/pmDxlYnWWsSCcEFaAoQohwhOMA6Z
# JfJF0tSv+koUsw6hSl7146aylSvDYUKPilAGgAUAy1yscgglMvtmQqWkEta/XGP2
# U8qvX8nUwOM=
# =DJf9
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 21 Oct 2024 17:07:04 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-10-21' of https://gitlab.com/thuth/qemu:
tests/functional: Convert the Avocado sh4 tuxrun test
Revert "hw/sh4/r2d: Realize IDE controller before accessing it"
tests/functional: Convert the Avocado ppc32 tuxrun test
tests/functional: Convert the Avocado mips64el tuxrun test
tests/functional: Convert the Avocado mips64 tuxrun test
tests/functional: Convert the Avocado mipsel tuxrun test
tests/functional: Convert the Avocado mips tuxrun test
tests/functional: Convert the Avocado x86_64 tuxrun test
tests/functional: Convert the Avocado i386 tuxrun test
tests/functional: Convert the Avocado riscv64 tuxrun tests
tests/functional: Convert the Avocado riscv32 tuxrun tests
tests/functional: Convert the Avocado arm tuxrun tests
tests/functional: Convert the Avocado s390x tuxrun test
tests/functional: Convert the Avocado sparc64 tuxrun test
tests/functional: Convert the Avocado ppc64 tuxrun tests
tests/functional: Add a base class for the TuxRun tests
hw/pci-bridge: Add a Kconfig switch for the normal PCI bridge
MAINTAINERS: A new maintainer for the qtests
tests/qtest: Raise the ide-test timeout
tests/vm: update openbsd image to 7.6
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ide-test occasionally times out: on the system I run
vm-build-openbsd on, it usually takes about 18 seconds, but
occasionally hits the 60s timeout, likely when the host machine is
under heavy load. I have also seen this test hit its time limit on
the s390x CI runner.
Double the timeout for this test so that it won't hit its timeout
even when the host is running more slowly than usual.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241015113705.239067-1-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Rather than waiting for the completion of migration on the source side,
wait for it on the destination QEMU side to avoid accessing the TPM TIS
memory mapped registers before QEMU could restore their state. This
error condition could be triggered on busy systems where the destination
QEMU did not have enough time to restore the TIS state while the test case
was already reading its registers. The test case was for example reading
the STS register and received an unexpected value (0xffffffff), which
lead to a segmentation fault later on due to trying to read 0xffff bytes
from the TIS into a buffer.
Cc: <qemu-stable@nongnu.org>
Reported-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
For USART, GPIO and SYSCFG devices, check that clock frequency before
and after enabling the peripheral clock in RCC is correct.
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241003081105.40836-4-ines.varhol@telecom-paris.fr
[PMM: Added missing qtest_quit() call]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Only check we eventually get a shared memory scanout.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-20-marcandre.lureau@redhat.com>
- Ani's patch to complete the memory API on coalesced IO / eventfd notifies
- Fabiano's Coverity fix on using pstrcpy() over strncpy()
- Dave's series on removing/deprecating zero-blocks and uffd cleanups
- Juraj's one more fix on multifd/cancel test where it can fail when
cancellation happens too slow on src
- Dave's one more remove deadcode patch in iova-tree.c
- Yuan's build fix for multifd qpl compressor
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZwZ6CBIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1wa3ZwD9HiAN9m7WOfZxXKOVIIwhOjUNTw0FiFeO
HMxp8A2jeYsBAK+d5lYGX1V2FtQ152YiOJQzRW31MkdAOishJzcHCXgO
=gBW0
-----END PGP SIGNATURE-----
Merge tag 'migration-20241009-pull-request' of https://gitlab.com/peterx/qemu into staging
Migration pull request
- Ani's patch to complete the memory API on coalesced IO / eventfd notifies
- Fabiano's Coverity fix on using pstrcpy() over strncpy()
- Dave's series on removing/deprecating zero-blocks and uffd cleanups
- Juraj's one more fix on multifd/cancel test where it can fail when
cancellation happens too slow on src
- Dave's one more remove deadcode patch in iova-tree.c
- Yuan's build fix for multifd qpl compressor
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZwZ6CBIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wa3ZwD9HiAN9m7WOfZxXKOVIIwhOjUNTw0FiFeO
# HMxp8A2jeYsBAK+d5lYGX1V2FtQ152YiOJQzRW31MkdAOishJzcHCXgO
# =gBW0
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 09 Oct 2024 13:41:44 BST
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal]
# gpg: aka "Peter Xu <peterx@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-20241009-pull-request' of https://gitlab.com/peterx/qemu:
migration/multifd: fix build error when qpl compression is enabled
util/iova-tree: Remove deadcode
tests/migration-test: Wait for cancellation sooner in multifd cancel
util/userfaultfd: Remove unused uffd_poll_events
migration/postcopy: Use uffd helpers
util/userfaultfd: Return -errno on error
migration: Remove unused socket_send_channel_create_sync
migration: Deprecate zero-blocks capability
migration: Remove unused migrate_zero_blocks
migration: Remove migrate_cap_set
migration/multifd: Ensure packet->ramblock is null-terminated
memory: notify hypervisor of all eventfds during listener (de)registration
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The qmp-cmd-test test takes typically about 15s on my local machine.
On the k8s runners it takes usually 20s but sometimes about 60s,
because the k8s runners have wildly variable execution time. If
they're running slow, we hit the default timeout. Bump the
qmp-cmd-test timeout to 120s to avoid this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20241008141337.2790423-1-peter.maydell@linaro.org
The source QEMU might not finish the cancellation of the migration
before we start setting up the next attempt. During the setup, the
test_migrate_start() function and others might need to interact with the
source in a way that is not possible unless the migration is fully
canceled. For example, setting capabilities when the migration is still
running leads to an error.
By moving the wait before the setup, we ensure this does not happen.
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Juraj Marcin <jmarcin@redhat.com>
Link: https://lore.kernel.org/r/20240920161319.2337625-1-jmarcin@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
* Add a property to set vl to ceil(AVL/2)
* Enable numamem testing for RISC-V
* Consider MISA bit choice in implied rule
* Fix the za64rs priv spec requirements
* Enable Bit Manip for OpenTitan Ibex CPU
* Fix the group bit setting of AIA with KVM
* Stop timer with infinite timecmp
* Add 'fcsr' register to QEMU log as a part of F extension
* Fix riscv64 build on musl libc
* Add preliminary textra trigger CSR functions
* RISC-V bsd-user support
* Respect firmware ELF entry point
* Add Svvptc extension support
* Fix masking of rv32 physical address
* Fix linking problem with semihosting disabled
* Fix IMSIC interrupt state updates
-----BEGIN PGP SIGNATURE-----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=15Hm
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20241002' of https://github.com/alistair23/qemu into staging
RISC-V PR for 9.2
* Add a property to set vl to ceil(AVL/2)
* Enable numamem testing for RISC-V
* Consider MISA bit choice in implied rule
* Fix the za64rs priv spec requirements
* Enable Bit Manip for OpenTitan Ibex CPU
* Fix the group bit setting of AIA with KVM
* Stop timer with infinite timecmp
* Add 'fcsr' register to QEMU log as a part of F extension
* Fix riscv64 build on musl libc
* Add preliminary textra trigger CSR functions
* RISC-V bsd-user support
* Respect firmware ELF entry point
* Add Svvptc extension support
* Fix masking of rv32 physical address
* Fix linking problem with semihosting disabled
* Fix IMSIC interrupt state updates
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmb83lYACgkQr3yVEwxT
# gBNndBAAmh66yWt9TeTHlQ/rgBhx2nUMBbfICBWQyNGvPlslffwrNoLkh8jpkuiP
# PD0RQArAAGeM09cgCZCu14JzIBmmNiGgUxsUnqOZvUw18uIlLFlpt/tiT7iGw/Xb
# pfI7waF66/FPXBErY2yiw9/RGQLlkiGNBC9FNYrD/kCahf9MSIobv85tOgSQ2qjH
# nOJ+UBN0TQ1x0Z5lJMj9Pzl1WDvelRnCkYI5nXg1heKG73Hm7GmHt99QpTV2Okqn
# T3jFzEfMTQeHO4nC/X2pbaesE62K+mTg/FZpId2iV8lMCSm1zKof+xJ4boKM9RB2
# 0HjXAT+MveLuLUNtgfbV9C+VgU25M+wnfy5tH0l801Y/Gez8Q1fbK2uykuiyiUSy
# MNNk/KzmOYuffwItuyeL3mmWHXsN+izUIeMmMxfL9X9nssZXRsrDXc+MByS7w0fk
# QOeZmXHTxXwxFymr0t0DLK2eKEG6cqQty1KWp6iLx3uwnMTGo+576P41Q+boj64s
# VllWzmuR0Ta0xuSR4sDvEFCO7OCFEgVdn1j0FvhRFskPEDrbQgXRLq8i3awtU6z1
# NIh+A30XeK+EZLv0sEje6gav5lZHWMfAeCOKJstVzOl8+NQibuKTUrsqLgTrBK6K
# plw8qwvZYjSnYErzHfywlq9ArufIvOHYcx9Nb76tLNy9E+y01yo=
# =15Hm
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 02 Oct 2024 06:47:02 BST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20241002' of https://github.com/alistair23/qemu: (35 commits)
bsd-user: Add RISC-V 64-bit Target Configuration and Debug XML Files
bsd-user: Implement set_mcontext and get_ucontext_sigreturn for RISCV
bsd-user: Implement 'get_mcontext' for RISC-V
bsd-user: Implement RISC-V signal trampoline setup functions
bsd-user: Define RISC-V signal handling structures and constants
bsd-user: Add generic RISC-V64 target definitions
bsd-user: Define RISC-V system call structures and constants
bsd-user: Define RISC-V VM parameters and helper functions
bsd-user: Add RISC-V thread setup and initialization support
bsd-user: Implement RISC-V sysarch system call emulation
bsd-user: Add RISC-V signal trampoline setup function
bsd-user: Define RISC-V register structures and register copying
bsd-user: Add RISC-V ELF definitions and hardware capability detection
bsd-user: Implement RISC-V TLS register setup
bsd-user: Implement RISC-V CPU register cloning and reset functions
bsd-user: Add RISC-V CPU execution loop and syscall handling
bsd-user: Implement RISC-V CPU initialization and main loop
hw/intc: riscv-imsic: Fix interrupt state updates.
target/riscv/cpu_helper: Fix linking problem with semihosting disabled
target/riscv32: Fix masking of physical address
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since the "shix" machine has been removed, the "r2d" machine is the only
machine that is still available for the sh4 and sh4eb targets. However,
the "r2d" machine apparently does not work in big endian mode, see here:
https://lore.kernel.org/qemu-devel/87a5fwjjew.wl-ysato@users.sourceforge.jp/
So there is no working machine left in the sh4eb-softmmu target, i.e. it
is currently completely useless. Thus remove it from the configuration
now. (Note: The linux-user binary is not removed since it might still
be used to run sh4 binaries in big endian mode).
Message-ID: <20240926105843.81385-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As per the step 5 in the process documented in bios-tables-test.c,
generate the expected ACPI SRAT AML data file for RISC-V using the
rebuild-expected-aml.sh script and update the
bios-tables-test-allowed-diff.h.
This is a new file being added for the first time. Hence, iASL diff
output is not added.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <a667480203b35508038176c8ce4722370294cc57.1723172696.git.haibo1.xu@intel.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add ACPI SRAT table test case for RISC-V when NUMA was enabled.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <a6f7e1a4b20ff7eb199e94ca0c8aa2e6794ce5b2.1723172696.git.haibo1.xu@intel.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As per process documented (steps 1-3) in bios-tables-test.c, add
empty AML data file for RISC-V ACPI SRAT table and add the entry
in bios-tables-test-allowed-diff.h.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <0e30216273f2f59916bc651350578d8e8bc3a75f.1723172696.git.haibo1.xu@intel.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Remove the 'n800' and 'n810' machine types, which modelled
Nokia internet tablets. These were deprecated in 9.0 and
so we can remove them for 9.2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-26-peter.maydell@linaro.org
[PMM: added removal of arm-n800-machine.c post-review]
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-34-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
SW modifying USART_CR1 TE bit should cuase HW to respond by altering
USART_ISR TEACK bit, and likewise for RE and REACK bit.
This resolves some but not all issues necessary for the official STM USART
HAL driver to function as is.
Fixes: 87b77e6e01 ("hw/char/stm32l4x5_usart: Enable serial read and write")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2540
Signed-off-by: Jacob Abrams <satur9nine@gmail.com>
Message-id: 20240911043255.51966-1-satur9nine@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The xbzrel and vcpu_dirty_limit are the two slowest tests from
migration-test. Move them under g_test_slow() to save about 40s per
run.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240911145204.17692-1-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240912073921.453203-36-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240912073921.453203-24-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240912073921.453203-13-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The numa-test needs a default machine in the target binary to work
successfully, so don't try to run this test if the corresponding
machine has not been enabled, e.g. when QEMU has been configured with
"--without-default-devices".
Message-ID: <20240905191434.694440-7-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When configuring QEMU with "--without-default-devices", currently a lot
of the x86 qtests are failing since they silently assume that a certain
device or the i440fx pc machine is available. Add more checks for CONFIG
switches here to not run those tests in case the corresponding device is
not available.
Message-ID: <20240905191434.694440-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In case QEMU has been configured with "--without-default-devices", the
"pc" machine type might be missing in the binary. We should check for
its availability before using it.
Message-ID: <20240905191434.694440-5-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's make sure that we always pass a machine name to the test_boot_orders()
function, so we can check whether the machine is available in the binary
and skip the test in case it is not included in the build.
Message-ID: <20240905191434.694440-4-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When configuring QEMU with the --without-default-devices switch, these
tests are currently failing since they assume that the "pc" and "q35"
machines are always available. Add some proper checks to make the test
work without these machines, too.
Message-ID: <20240905191434.694440-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Per datasheet, "HIGH AND LOW LIMIT REGISTERS", the lower 4 bit
of the limit registers are unused and always report 0.
The lower 4 bit should not be used for temperature comparisons,
so mask the unused bits before storing the limits.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20240906154911.86803-6-philmd@linaro.org>
[PMD: Update tests/qtest/ files]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The CRIS target is deprecated since v9.0 (commit c7bbef4023
"docs: mark CRIS support as deprecated").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-14-philmd@linaro.org>
We do not always want both address and undefined behavior
sanitizers running at the same time.
For the gitlab custom-runners, drop to only --enable-ubsan.
These jobs are not run by default, but as will be obvious in the
next patch, we don't run ASan on x86 either, and it seems wrong
to hold aarch64 and s390x to a different standard.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240813095216.306555-2-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
On my OpenBSD VM test system, the ahci-test sometimes hits its 60 second
timeout. It has 75 subtests and allowing at least two seconds per
subtest seems reasonable. Bump it to 150s.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240905165554.320577-3-peter.maydell@linaro.org
In the dm163-test and stm32l4x5_usart-test, a couple of subtests are
missing the qtest_quit() call. The effect of this is that on hosts
other than Linux and FreeBSD the test will timeout after executing
all the tests:
242/845 qemu:qtest+qtest-arm / qtest-arm/dm163-test TIMEOUT 60.04s 3 subtests passed
100/845 qemu:qtest+qtest-arm / qtest-arm/stm32l4x5_usart-test TIMEOUT 600.02s 5 subtests passed
This happens because the qemu-system-arm binary which the test
starts does not exit, and because it shares the stdout with the
test binary, the overall meson test harness thinks the test is
still running. On Linux and FreeBSD we have an extra safety net
set up in qtest_spawn_qemu() which kills off any QEMU binary that
ends up without a parent. This is intended for the case where
QEMU crashed and didn't respond to a SIGTERM or polite request
to quit, but it also sidestepped the problem in this case.
However, OpenBSD doesn't have a PDEATHSIG equivalent, so we
see the timeouts when running a 'make vm-build-openbsd' run.
Add the missing qtest_quit() calls.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240905165554.320577-2-peter.maydell@linaro.org
New test function "ufstest_query_desc_request" added, which can check one's
virtual UFS device can properly read and its descriptor data.
(Writing descriptors are not implemented yet.)
The testcases attempt to read all kinds of descriptors at least once,
except for configuration descriptors (which are not implemented yet.)
There are some testcases that are intended to make an error caused by
an invalid index value or an invalid selector value.
Signed-off-by: Yoochan Jeong <yc01.jeong@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
New test function "ufstest_query_attr_request" added, which can check one's
virtual UFS device can properly read and write its attribute data.
It tests if reading and writing attributes work properly. There are
some testcases that are intended to make an error caused by writing an
invalid value, allocating an invalid selector and permission issues.
Signed-off-by: Yoochan Jeong <yc01.jeong@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
New test function "ufstest_flag_request" added, which can check one's
virtual UFS device can properly read and write its flag data. It tests
if reading, setting, clearing and toggling flags work properly. There
are some testcases that are intended to make an error caused by
permission issues.
Signed-off-by: Yoochan Jeong <yc01.jeong@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
Minor bugs and errors related to ufs-test are resolved. Some
permissions and code implementations that are not synchronized
with the ufs spec are edited.
Signed-off-by: Yoochan Jeong <yc01.jeong@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
The test_vcpu_dirty_limit is the only test that does not check for the
availability of the machine before starting the test, so it fails when
QEMU has been configured with --without-default-devices. Add a check for
the "pc" machine type to fix it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
In test_multifd_tcp_cancel() we create three QEMU processes: 'from',
'to' and 'to2'. We clean up (via qtest_quit()) 'from' and 'to2' when
we call test_migrate_end(), but never clean up 'to', which results in
this leak:
Direct leak of 336 byte(s) in 1 object(s) allocated from:
#0 0x55e984fcd328 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/tests/qtest/migration-test+0x22f328) (BuildId: 710d409b68bb04427009e9ca6e1b63ff8af785d3)
#1 0x7f0878b39c50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x55e98503a172 in qtest_spawn_qemu tests/qtest/libqtest.c:397:21
#3 0x55e98502bc4a in qtest_init_internal tests/qtest/libqtest.c:471:9
#4 0x55e98502c5b7 in qtest_init_with_env tests/qtest/libqtest.c:533:21
#5 0x55e9850eef0f in test_migrate_start tests/qtest/migration-test.c:857:11
#6 0x55e9850eb01d in test_multifd_tcp_cancel tests/qtest/migration-test.c:3297:9
#7 0x55e985103407 in migration_test_wrapper tests/qtest/migration-helpers.c:456:5
Call qtest_quit() on 'to' to clean it up once it has exited.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
We g_strdup() the "status" string we get out of the qdict in
get_dirty_rate(), but we never free it. Since we only use this
string while the dictionary is still valid, we don't need to strdup
at all; drop the unnecessary call to avoid this leak:
Direct leak of 18 byte(s) in 2 object(s) allocated from:
#0 0x564b3e01913e in malloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/tests/qtest/migration-test+0x22f13e) (BuildId: d6403a811332fcc846f93c45e23abfd06d1e67c4)
#1 0x7f2f278ff738 in g_malloc debian/build/deb/../../../glib/gmem.c:128:13
#2 0x7f2f27914583 in g_strdup debian/build/deb/../../../glib/gstrfuncs.c:361:17
#3 0x564b3e14bb5b in get_dirty_rate tests/qtest/migration-test.c:3447:14
#4 0x564b3e138e00 in test_vcpu_dirty_limit tests/qtest/migration-test.c:3565:16
#5 0x564b3e14f417 in migration_test_wrapper tests/qtest/migration-helpers.c:456:5
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
In migrate_set_ports() we call qdict_put_str() with a value string
which we g_strdup(). However qdict_put_str() takes a copy of the
value string, it doesn't take ownership of it, so the g_strdup()
only results in a leak:
Direct leak of 6 byte(s) in 1 object(s) allocated from:
#0 0x56298023713e in malloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/tests/qtest/migration-test+0x22f13e) (BuildId: b2b9174a5a54707a7f76bca51cdc95d2aa08bac1)
#1 0x7fba0ad39738 in g_malloc debian/build/deb/../../../glib/gmem.c:128:13
#2 0x7fba0ad4e583 in g_strdup debian/build/deb/../../../glib/gstrfuncs.c:361:17
#3 0x56298036b16e in migrate_set_ports tests/qtest/migration-helpers.c:145:49
#4 0x56298036ad1c in migrate_qmp tests/qtest/migration-helpers.c:228:9
#5 0x56298035b3dd in test_precopy_common tests/qtest/migration-test.c:1820:5
#6 0x5629803549dc in test_multifd_tcp_channels_none tests/qtest/migration-test.c:3077:5
#7 0x56298036d427 in migration_test_wrapper tests/qtest/migration-helpers.c:456:5
Drop the unnecessary g_strdup() call.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
In the migration test we create several TLS certificates with
the TLS_* macros from crypto-tls-x509-helpers.h. These macros
create both a QCryptoTLSCertReq object which must be deinitialized
and also an on-disk certificate file. The migration test currently
removes the on-disk file in test_migrate_tls_x509_finish() but
never deinitializes the QCryptoTLSCertReq, which means that memory
allocated as part of it is leaked:
Indirect leak of 2 byte(s) in 1 object(s) allocated from:
#0 0x5558ba33712e in malloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/tests/qtest/migration-test+0x22f12e) (BuildId: 4c8618f663e538538cad19d35233124cea161491)
#1 0x7f64afc131f4 (/lib/x86_64-linux-gnu/libtasn1.so.6+0x81f4) (BuildId: 2fde6ecb43c586fe4077118f771077aa1298e7ea)
#2 0x7f64afc18d58 in asn1_write_value (/lib/x86_64-linux-gnu/libtasn1.so.6+0xdd58) (BuildId: 2fde6ecb43c586fe4077118f771077aa1298e7ea)
#3 0x7f64af8fc678 in gnutls_x509_crt_set_version (/lib/x86_64-linux-gnu/libgnutls.so.30+0xe7678) (BuildId: 97b8f99f392f1fd37b969a7164bcea884e23649b)
#4 0x5558ba470035 in test_tls_generate_cert tests/unit/crypto-tls-x509-helpers.c:234:5
#5 0x5558ba464e4a in test_migrate_tls_x509_start_common tests/qtest/migration-test.c:1058:5
#6 0x5558ba462c8a in test_migrate_tls_x509_start_default_host tests/qtest/migration-test.c:1123:12
#7 0x5558ba45ab40 in test_precopy_common tests/qtest/migration-test.c:1786:21
#8 0x5558ba450015 in test_precopy_unix_tls_x509_default_host tests/qtest/migration-test.c:2077:5
#9 0x5558ba46d3c7 in migration_test_wrapper tests/qtest/migration-helpers.c:456:5
(and similar reports).
The only function currently provided to deinit a QCryptoTLSCertReq is
test_tls_discard_cert(), which also removes the on-disk certificate
file. For the migration tests we need to retain the on-disk files
until we've finished running the test, so the simplest fix is to
provide a new function test_tls_deinit_cert() which does only the
cleanup of the QCryptoTLSCertReq, and call it in the right places.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Daniel Henrique Barboza