mirror of https://github.com/xemu-project/xemu.git
10087 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Zhao Liu
|
f58db4eeb1 |
tests: bios-tables-test: Add ACPI table binaries for smbios type4 thread count2 test
Following the guidelines in tests/qtest/bios-tables-test.c, this
is step 5 and 6.
Changes in the tables:
FACP:
+/*
+ * Intel ACPI Component Architecture
+ * AML/ASL+ Disassembler version 20200925 (64-bit version)
+ * Copyright (c) 2000 - 2020 Intel Corporation
+ *
+ * Disassembly of /tmp/aml-CNE3C2, Mon Oct 23 15:25:01 2023
+ *
+ * ACPI Data Table [FACP]
+ *
+ * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue
+ */
+
+[000h 0000 4] Signature : "FACP" [Fixed ACPI Description Table (FADT)]
+[004h 0004 4] Table Length : 000000F4
+[008h 0008 1] Revision : 03
+[009h 0009 1] Checksum : B3
+[00Ah 0010 6] Oem ID : "BOCHS "
+[010h 0016 8] Oem Table ID : "BXPC "
+[018h 0024 4] Oem Revision : 00000001
+[01Ch 0028 4] Asl Compiler ID : "BXPC"
+[020h 0032 4] Asl Compiler Revision : 00000001
+
+[024h 0036 4] FACS Address : 00000000
+[028h 0040 4] DSDT Address : 00000000
+[02Ch 0044 1] Model : 01
+[02Dh 0045 1] PM Profile : 00 [Unspecified]
+[02Eh 0046 2] SCI Interrupt : 0009
+[030h 0048 4] SMI Command Port : 000000B2
+[034h 0052 1] ACPI Enable Value : 02
+[035h 0053 1] ACPI Disable Value : 03
+[036h 0054 1] S4BIOS Command : 00
+[037h 0055 1] P-State Control : 00
+[038h 0056 4] PM1A Event Block Address : 00000600
+[03Ch 0060 4] PM1B Event Block Address : 00000000
+[040h 0064 4] PM1A Control Block Address : 00000604
+[044h 0068 4] PM1B Control Block Address : 00000000
+[048h 0072 4] PM2 Control Block Address : 00000000
+[04Ch 0076 4] PM Timer Block Address : 00000608
+[050h 0080 4] GPE0 Block Address : 00000620
+[054h 0084 4] GPE1 Block Address : 00000000
+[058h 0088 1] PM1 Event Block Length : 04
+[059h 0089 1] PM1 Control Block Length : 02
+[05Ah 0090 1] PM2 Control Block Length : 00
+[05Bh 0091 1] PM Timer Block Length : 04
+[05Ch 0092 1] GPE0 Block Length : 10
+[05Dh 0093 1] GPE1 Block Length : 00
+[05Eh 0094 1] GPE1 Base Offset : 00
+[05Fh 0095 1] _CST Support : 00
+[060h 0096 2] C2 Latency : 0FFF
+[062h 0098 2] C3 Latency : 0FFF
+[064h 0100 2] CPU Cache Size : 0000
+[066h 0102 2] Cache Flush Stride : 0000
+[068h 0104 1] Duty Cycle Offset : 00
+[069h 0105 1] Duty Cycle Width : 00
+[06Ah 0106 1] RTC Day Alarm Index : 00
+[06Bh 0107 1] RTC Month Alarm Index : 00
+[06Ch 0108 1] RTC Century Index : 32
+[06Dh 0109 2] Boot Flags (decoded below) : 0002
+ Legacy Devices Supported (V2) : 0
+ 8042 Present on ports 60/64 (V2) : 1
+ VGA Not Present (V4) : 0
+ MSI Not Supported (V4) : 0
+ PCIe ASPM Not Supported (V4) : 0
+ CMOS RTC Not Present (V5) : 0
+[06Fh 0111 1] Reserved : 00
+[070h 0112 4] Flags (decoded below) : 000484A5
+ WBINVD instruction is operational (V1) : 1
+ WBINVD flushes all caches (V1) : 0
+ All CPUs support C1 (V1) : 1
+ C2 works on MP system (V1) : 0
+ Control Method Power Button (V1) : 0
+ Control Method Sleep Button (V1) : 1
+ RTC wake not in fixed reg space (V1) : 0
+ RTC can wake system from S4 (V1) : 1
+ 32-bit PM Timer (V1) : 0
+ Docking Supported (V1) : 0
+ Reset Register Supported (V2) : 1
+ Sealed Case (V3) : 0
+ Headless - No Video (V3) : 0
+ Use native instr after SLP_TYPx (V3) : 0
+ PCIEXP_WAK Bits Supported (V4) : 0
+ Use Platform Timer (V4) : 1
+ RTC_STS valid on S4 wake (V4) : 0
+ Remote Power-on capable (V4) : 0
+ Use APIC Cluster Model (V4) : 1
+ Use APIC Physical Destination Mode (V4) : 0
+ Hardware Reduced (V5) : 0
+ Low Power S0 Idle (V5) : 0
+
+[074h 0116 12] Reset Register : [Generic Address Structure]
+[074h 0116 1] Space ID : 01 [SystemIO]
+[075h 0117 1] Bit Width : 08
+[076h 0118 1] Bit Offset : 00
+[077h 0119 1] Encoded Access Width : 00 [Undefined/Legacy]
+[078h 0120 8] Address : 0000000000000CF9
+
+[080h 0128 1] Value to cause reset : 0F
+[081h 0129 2] ARM Flags (decoded below) : 0000
+ PSCI Compliant : 0
+ Must use HVC for PSCI : 0
+
+[083h 0131 1] FADT Minor Revision : 00
+[084h 0132 8] FACS Address : 0000000000000000
+[08Ch 0140 8] DSDT Address : 0000000000000000
+[094h 0148 12] PM1A Event Block : [Generic Address Structure]
+[094h 0148 1] Space ID : 01 [SystemIO]
+[095h 0149 1] Bit Width : 20
+[096h 0150 1] Bit Offset : 00
+[097h 0151 1] Encoded Access Width : 00 [Undefined/Legacy]
+[098h 0152 8] Address : 0000000000000600
+
+[0A0h 0160 12] PM1B Event Block : [Generic Address Structure]
+[0A0h 0160 1] Space ID : 00 [SystemMemory]
+[0A1h 0161 1] Bit Width : 00
+[0A2h 0162 1] Bit Offset : 00
+[0A3h 0163 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0A4h 0164 8] Address : 0000000000000000
+
+[0ACh 0172 12] PM1A Control Block : [Generic Address Structure]
+[0ACh 0172 1] Space ID : 01 [SystemIO]
+[0ADh 0173 1] Bit Width : 10
+[0AEh 0174 1] Bit Offset : 00
+[0AFh 0175 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0B0h 0176 8] Address : 0000000000000604
+
+[0B8h 0184 12] PM1B Control Block : [Generic Address Structure]
+[0B8h 0184 1] Space ID : 00 [SystemMemory]
+[0B9h 0185 1] Bit Width : 00
+[0BAh 0186 1] Bit Offset : 00
+[0BBh 0187 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0BCh 0188 8] Address : 0000000000000000
+
+[0C4h 0196 12] PM2 Control Block : [Generic Address Structure]
+[0C4h 0196 1] Space ID : 00 [SystemMemory]
+[0C5h 0197 1] Bit Width : 00
+[0C6h 0198 1] Bit Offset : 00
+[0C7h 0199 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0C8h 0200 8] Address : 0000000000000000
+
+[0D0h 0208 12] PM Timer Block : [Generic Address Structure]
+[0D0h 0208 1] Space ID : 01 [SystemIO]
+[0D1h 0209 1] Bit Width : 20
+[0D2h 0210 1] Bit Offset : 00
+[0D3h 0211 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0D4h 0212 8] Address : 0000000000000608
+
+[0DCh 0220 12] GPE0 Block : [Generic Address Structure]
+[0DCh 0220 1] Space ID : 01 [SystemIO]
+[0DDh 0221 1] Bit Width : 80
+[0DEh 0222 1] Bit Offset : 00
+[0DFh 0223 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0E0h 0224 8] Address : 0000000000000620
+
+[0E8h 0232 12] GPE1 Block : [Generic Address Structure]
+[0E8h 0232 1] Space ID : 00 [SystemMemory]
+[0E9h 0233 1] Bit Width : 00
+[0EAh 0234 1] Bit Offset : 00
+[0EBh 0235 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0ECh 0236 8] Address : 0000000000000000
...
APIC:
+/*
+ * Intel ACPI Component Architecture
+ * AML/ASL+ Disassembler version 20200925 (64-bit version)
+ * Copyright (c) 2000 - 2020 Intel Corporation
+ *
+ * Disassembly of /tmp/aml-WKE3C2, Mon Oct 23 15:25:01 2023
+ *
+ * ACPI Data Table [APIC]
+ *
+ * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue
+ */
+
+[000h 0000 4] Signature : "APIC" [Multiple APIC Description Table (MADT)]
+[004h 0004 4] Table Length : 00000CA6
+[008h 0008 1] Revision : 03
+[009h 0009 1] Checksum : 2C
+[00Ah 0010 6] Oem ID : "BOCHS "
+[010h 0016 8] Oem Table ID : "BXPC "
+[018h 0024 4] Oem Revision : 00000001
+[01Ch 0028 4] Asl Compiler ID : "BXPC"
+[020h 0032 4] Asl Compiler Revision : 00000001
+
+[024h 0036 4] Local Apic Address : FEE00000
+[028h 0040 4] Flags (decoded below) : 00000001
+ PC-AT Compatibility : 1
+
+[02Ch 0044 1] Subtable Type : 00 [Processor Local APIC]
+[02Dh 0045 1] Length : 08
+[02Eh 0046 1] Processor ID : 00
+[02Fh 0047 1] Local Apic ID : 00
+[030h 0048 4] Flags (decoded below) : 00000001
+ Processor Enabled : 1
+ Runtime Online Capable : 0
+
+[034h 0052 1] Subtable Type : 00 [Processor Local APIC]
+[035h 0053 1] Length : 08
+[036h 0054 1] Processor ID : 01
+[037h 0055 1] Local Apic ID : 01
+[038h 0056 4] Flags (decoded below) : 00000001
+ Processor Enabled : 1
+ Runtime Online Capable : 0
[snip]
+[434h 1076 1] Subtable Type : 00 [Processor Local APIC]
+[435h 1077 1] Length : 08
+[436h 1078 1] Processor ID : 81
+[437h 1079 1] Local Apic ID : 81
+[438h 1080 4] Flags (decoded below) : 00000001
+ Processor Enabled : 1
+ Runtime Online Capable : 0
+
+[43Ch 1084 1] Subtable Type : 09 [Processor Local x2APIC]
+[43Dh 1085 1] Length : 10
+[43Eh 1086 2] Reserved : 0000
+[440h 1088 4] Processor x2Apic ID : 00000100
+[444h 1092 4] Flags (decoded below) : 00000001
+ Processor Enabled : 1
+[448h 1096 4] Processor UID : 00000082
[snip]
+[C4Ch 3148 1] Subtable Type : 09 [Processor Local x2APIC]
+[C4Dh 3149 1] Length : 10
+[C4Eh 3150 2] Reserved : 0000
+[C50h 3152 4] Processor x2Apic ID : 00000181
+[C54h 3156 4] Flags (decoded below) : 00000000
+ Processor Enabled : 0
+[C58h 3160 4] Processor UID : 00000103
+
+[C5Ch 3164 1] Subtable Type : 01 [I/O APIC]
+[C5Dh 3165 1] Length : 0C
+[C5Eh 3166 1] I/O Apic ID : 00
+[C5Fh 3167 1] Reserved : 00
+[C60h 3168 4] Address : FEC00000
+[C64h 3172 4] Interrupt : 00000000
+
+[C68h 3176 1] Subtable Type : 02 [Interrupt Source Override]
+[C69h 3177 1] Length : 0A
+[C6Ah 3178 1] Bus : 00
+[C6Bh 3179 1] Source : 00
+[C6Ch 3180 4] Interrupt : 00000002
+[C70h 3184 2] Flags (decoded below) : 0000
+ Polarity : 0
+ Trigger Mode : 0
[snip]
+[C90h 3216 1] Subtable Type : 02 [Interrupt Source Override]
+[C91h 3217 1] Length : 0A
+[C92h 3218 1] Bus : 00
+[C93h 3219 1] Source : 0B
+[C94h 3220 4] Interrupt : 0000000B
+[C98h 3224 2] Flags (decoded below) : 000D
+ Polarity : 1
+ Trigger Mode : 3
+
+[C9Ah 3226 1] Subtable Type : 0A [Local x2APIC NMI]
+[C9Bh 3227 1] Length : 0C
+[C9Ch 3228 2] Flags (decoded below) : 0000
+ Polarity : 0
+ Trigger Mode : 0
+[C9Eh 3230 4] Processor UID : FFFFFFFF
+[CA2h 3234 1] Interrupt Input LINT : 01
+[CA3h 3235 3] Reserved : 000000
...
DSDT:
+/*
+ * Intel ACPI Component Architecture
+ * AML/ASL+ Disassembler version 20200925 (64-bit version)
+ * Copyright (c) 2000 - 2020 Intel Corporation
+ *
+ * Disassembling to symbolic ASL+ operators
+ *
+ * Disassembly of /tmp/aml-CDE3C2, Mon Oct 23 15:25:01 2023
+ *
+ * Original Table Header:
+ * Signature "DSDT"
+ * Length 0x000083EA (33770)
+ * Revision 0x01 **** 32-bit table (V1), no 64-bit math support
+ * Checksum 0x01
+ * OEM ID "BOCHS "
+ * OEM Table ID "BXPC "
+ * OEM Revision 0x00000001 (1)
+ * Compiler ID "BXPC"
+ * Compiler Version 0x00000001 (1)
+ */
+DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
+{
+ Scope (\)
+ {
+ OperationRegion (DBG, SystemIO, 0x0402, One)
+ Field (DBG, ByteAcc, NoLock, Preserve)
+ {
+ DBGB, 8
+ }
+
+ Method (DBUG, 1, NotSerialized)
+ {
+ ToHexString (Arg0, Local0)
+ ToBuffer (Local0, Local0)
+ Local1 = (SizeOf (Local0) - One)
+ Local2 = Zero
+ While ((Local2 < Local1))
+ {
+ DBGB = DerefOf (Local0 [Local2])
+ Local2++
+ }
+
+ DBGB = 0x0A
+ }
+ }
[snip]
+ Processor (C000, 0x00, 0x00000000, 0x00)
+ {
+ Method (_STA, 0, Serialized) // _STA: Status
+ {
+ Return (CSTA (Zero))
+ }
+
+ Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ {
+ 0x00, 0x08, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00 // ........
+ })
+ Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
+ {
+ COST (Zero, Arg0, Arg1, Arg2)
+ }
+ }
[snip]
+ Processor (C081, 0x81, 0x00000000, 0x00)
+ {
+ Method (_STA, 0, Serialized) // _STA: Status
+ {
+ Return (CSTA (0x81))
+ }
+
+ Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ {
+ 0x00, 0x08, 0x81, 0x81, 0x01, 0x00, 0x00, 0x00 // ........
+ })
+ Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device, x=0-9
+ {
+ CEJ0 (0x81)
+ }
+
+ Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
+ {
+ COST (0x81, Arg0, Arg1, Arg2)
+ }
+ }
...
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20231023094635.1588282-17-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
|
Zhao Liu
|
198eee0cc1 |
tests: bios-tables-test: Add test for smbios type4 thread count2
This tests the commit
|
|
|
Zhao Liu
|
7cb953ca19 |
tests: bios-tables-test: Prepare the ACPI table change for smbios type4 thread count2 test
Following the guidelines in tests/qtest/bios-tables-test.c, this is step 1 - 3. List the ACPI tables that will be added to test the thread count2 field of smbios type4 table. Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20231023094635.1588282-15-zhao1.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
|
|
Zhao Liu
|
a775cb191e |
tests: bios-tables-test: Add ACPI table binaries for smbios type4 thread count test
Following the guidelines in tests/qtest/bios-tables-test.c, this
is step 5 and 6.
Changes in the tables:
FACP:
+/*
+ * Intel ACPI Component Architecture
+ * AML/ASL+ Disassembler version 20200925 (64-bit version)
+ * Copyright (c) 2000 - 2020 Intel Corporation
+ *
+ * Disassembly of /tmp/aml-1NP791, Wed Aug 23 21:51:31 2023
+ *
+ * ACPI Data Table [FACP]
+ *
+ * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue
+ */
+
+[000h 0000 4] Signature : "FACP" [Fixed ACPI Description Table (FADT)]
+[004h 0004 4] Table Length : 000000F4
+[008h 0008 1] Revision : 03
+[009h 0009 1] Checksum : B3
+[00Ah 0010 6] Oem ID : "BOCHS "
+[010h 0016 8] Oem Table ID : "BXPC "
+[018h 0024 4] Oem Revision : 00000001
+[01Ch 0028 4] Asl Compiler ID : "BXPC"
+[020h 0032 4] Asl Compiler Revision : 00000001
+
+[024h 0036 4] FACS Address : 00000000
+[028h 0040 4] DSDT Address : 00000000
+[02Ch 0044 1] Model : 01
+[02Dh 0045 1] PM Profile : 00 [Unspecified]
+[02Eh 0046 2] SCI Interrupt : 0009
+[030h 0048 4] SMI Command Port : 000000B2
+[034h 0052 1] ACPI Enable Value : 02
+[035h 0053 1] ACPI Disable Value : 03
+[036h 0054 1] S4BIOS Command : 00
+[037h 0055 1] P-State Control : 00
+[038h 0056 4] PM1A Event Block Address : 00000600
+[03Ch 0060 4] PM1B Event Block Address : 00000000
+[040h 0064 4] PM1A Control Block Address : 00000604
+[044h 0068 4] PM1B Control Block Address : 00000000
+[048h 0072 4] PM2 Control Block Address : 00000000
+[04Ch 0076 4] PM Timer Block Address : 00000608
+[050h 0080 4] GPE0 Block Address : 00000620
+[054h 0084 4] GPE1 Block Address : 00000000
+[058h 0088 1] PM1 Event Block Length : 04
+[059h 0089 1] PM1 Control Block Length : 02
+[05Ah 0090 1] PM2 Control Block Length : 00
+[05Bh 0091 1] PM Timer Block Length : 04
+[05Ch 0092 1] GPE0 Block Length : 10
+[05Dh 0093 1] GPE1 Block Length : 00
+[05Eh 0094 1] GPE1 Base Offset : 00
+[05Fh 0095 1] _CST Support : 00
+[060h 0096 2] C2 Latency : 0FFF
+[062h 0098 2] C3 Latency : 0FFF
+[064h 0100 2] CPU Cache Size : 0000
+[066h 0102 2] Cache Flush Stride : 0000
+[068h 0104 1] Duty Cycle Offset : 00
+[069h 0105 1] Duty Cycle Width : 00
+[06Ah 0106 1] RTC Day Alarm Index : 00
+[06Bh 0107 1] RTC Month Alarm Index : 00
+[06Ch 0108 1] RTC Century Index : 32
+[06Dh 0109 2] Boot Flags (decoded below) : 0002
+ Legacy Devices Supported (V2) : 0
+ 8042 Present on ports 60/64 (V2) : 1
+ VGA Not Present (V4) : 0
+ MSI Not Supported (V4) : 0
+ PCIe ASPM Not Supported (V4) : 0
+ CMOS RTC Not Present (V5) : 0
+[06Fh 0111 1] Reserved : 00
+[070h 0112 4] Flags (decoded below) : 000484A5
+ WBINVD instruction is operational (V1) : 1
+ WBINVD flushes all caches (V1) : 0
+ All CPUs support C1 (V1) : 1
+ C2 works on MP system (V1) : 0
+ Control Method Power Button (V1) : 0
+ Control Method Sleep Button (V1) : 1
+ RTC wake not in fixed reg space (V1) : 0
+ RTC can wake system from S4 (V1) : 1
+ 32-bit PM Timer (V1) : 0
+ Docking Supported (V1) : 0
+ Reset Register Supported (V2) : 1
+ Sealed Case (V3) : 0
+ Headless - No Video (V3) : 0
+ Use native instr after SLP_TYPx (V3) : 0
+ PCIEXP_WAK Bits Supported (V4) : 0
+ Use Platform Timer (V4) : 1
+ RTC_STS valid on S4 wake (V4) : 0
+ Remote Power-on capable (V4) : 0
+ Use APIC Cluster Model (V4) : 1
+ Use APIC Physical Destination Mode (V4) : 0
+ Hardware Reduced (V5) : 0
+ Low Power S0 Idle (V5) : 0
+
+[074h 0116 12] Reset Register : [Generic Address Structure]
+[074h 0116 1] Space ID : 01 [SystemIO]
+[075h 0117 1] Bit Width : 08
+[076h 0118 1] Bit Offset : 00
+[077h 0119 1] Encoded Access Width : 00 [Undefined/Legacy]
+[078h 0120 8] Address : 0000000000000CF9
+
+[080h 0128 1] Value to cause reset : 0F
+[081h 0129 2] ARM Flags (decoded below) : 0000
+ PSCI Compliant : 0
+ Must use HVC for PSCI : 0
+
+[083h 0131 1] FADT Minor Revision : 00
+[084h 0132 8] FACS Address : 0000000000000000
+[08Ch 0140 8] DSDT Address : 0000000000000000
+[094h 0148 12] PM1A Event Block : [Generic Address Structure]
+[094h 0148 1] Space ID : 01 [SystemIO]
+[095h 0149 1] Bit Width : 20
+[096h 0150 1] Bit Offset : 00
+[097h 0151 1] Encoded Access Width : 00 [Undefined/Legacy]
+[098h 0152 8] Address : 0000000000000600
+
+[0A0h 0160 12] PM1B Event Block : [Generic Address Structure]
+[0A0h 0160 1] Space ID : 00 [SystemMemory]
+[0A1h 0161 1] Bit Width : 00
+[0A2h 0162 1] Bit Offset : 00
+[0A3h 0163 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0A4h 0164 8] Address : 0000000000000000
+
+[0ACh 0172 12] PM1A Control Block : [Generic Address Structure]
+[0ACh 0172 1] Space ID : 01 [SystemIO]
+[0ADh 0173 1] Bit Width : 10
+[0AEh 0174 1] Bit Offset : 00
+[0AFh 0175 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0B0h 0176 8] Address : 0000000000000604
+
+[0B8h 0184 12] PM1B Control Block : [Generic Address Structure]
+[0B8h 0184 1] Space ID : 00 [SystemMemory]
+[0B9h 0185 1] Bit Width : 00
+[0BAh 0186 1] Bit Offset : 00
+[0BBh 0187 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0BCh 0188 8] Address : 0000000000000000
+
+[0C4h 0196 12] PM2 Control Block : [Generic Address Structure]
+[0C4h 0196 1] Space ID : 00 [SystemMemory]
+[0C5h 0197 1] Bit Width : 00
+[0C6h 0198 1] Bit Offset : 00
+[0C7h 0199 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0C8h 0200 8] Address : 0000000000000000
+
+[0D0h 0208 12] PM Timer Block : [Generic Address Structure]
+[0D0h 0208 1] Space ID : 01 [SystemIO]
+[0D1h 0209 1] Bit Width : 20
+[0D2h 0210 1] Bit Offset : 00
+[0D3h 0211 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0D4h 0212 8] Address : 0000000000000608
+
+[0DCh 0220 12] GPE0 Block : [Generic Address Structure]
+[0DCh 0220 1] Space ID : 01 [SystemIO]
+[0DDh 0221 1] Bit Width : 80
+[0DEh 0222 1] Bit Offset : 00
+[0DFh 0223 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0E0h 0224 8] Address : 0000000000000620
+
+[0E8h 0232 12] GPE1 Block : [Generic Address Structure]
+[0E8h 0232 1] Space ID : 00 [SystemMemory]
+[0E9h 0233 1] Bit Width : 00
+[0EAh 0234 1] Bit Offset : 00
+[0EBh 0235 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0ECh 0236 8] Address : 0000000000000000
...
APIC:
+/*
+ * Intel ACPI Component Architecture
+ * AML/ASL+ Disassembler version 20200925 (64-bit version)
+ * Copyright (c) 2000 - 2020 Intel Corporation
+ *
+ * Disassembly of /tmp/aml-2JP791, Wed Aug 23 21:51:31 2023
+ *
+ * ACPI Data Table [APIC]
+ *
+ * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue
+ */
+
+[000h 0000 4] Signature : "APIC" [Multiple APIC Description Table (MADT)]
+[004h 0004 4] Table Length : 00000220
+[008h 0008 1] Revision : 03
+[009h 0009 1] Checksum : 63
+[00Ah 0010 6] Oem ID : "BOCHS "
+[010h 0016 8] Oem Table ID : "BXPC "
+[018h 0024 4] Oem Revision : 00000001
+[01Ch 0028 4] Asl Compiler ID : "BXPC"
+[020h 0032 4] Asl Compiler Revision : 00000001
+
+[024h 0036 4] Local Apic Address : FEE00000
+[028h 0040 4] Flags (decoded below) : 00000001
+ PC-AT Compatibility : 1
+
+[02Ch 0044 1] Subtable Type : 00 [Processor Local APIC]
+[02Dh 0045 1] Length : 08
+[02Eh 0046 1] Processor ID : 00
+[02Fh 0047 1] Local Apic ID : 00
+[030h 0048 4] Flags (decoded below) : 00000001
+ Processor Enabled : 1
+ Runtime Online Capable : 0
+
+[034h 0052 1] Subtable Type : 00 [Processor Local APIC]
+[035h 0053 1] Length : 08
+[036h 0054 1] Processor ID : 01
+[037h 0055 1] Local Apic ID : 01
+[038h 0056 4] Flags (decoded below) : 00000001
+ Processor Enabled : 1
+ Runtime Online Capable : 0
[snip]
+[1D4h 0468 1] Subtable Type : 00 [Processor Local APIC]
+[1D5h 0469 1] Length : 08
+[1D6h 0470 1] Processor ID : 35
+[1D7h 0471 1] Local Apic ID : 6A
+[1D8h 0472 4] Flags (decoded below) : 00000000
+ Processor Enabled : 0
+ Runtime Online Capable : 0
+
+[1DCh 0476 1] Subtable Type : 01 [I/O APIC]
+[1DDh 0477 1] Length : 0C
+[1DEh 0478 1] I/O Apic ID : 00
+[1DFh 0479 1] Reserved : 00
+[1E0h 0480 4] Address : FEC00000
+[1E4h 0484 4] Interrupt : 00000000
+
+[1E8h 0488 1] Subtable Type : 02 [Interrupt Source Override]
+[1E9h 0489 1] Length : 0A
+[1EAh 0490 1] Bus : 00
+[1EBh 0491 1] Source : 00
+[1ECh 0492 4] Interrupt : 00000002
+[1F0h 0496 2] Flags (decoded below) : 0000
+ Polarity : 0
+ Trigger Mode : 0
+
+[1F2h 0498 1] Subtable Type : 02 [Interrupt Source Override]
+[1F3h 0499 1] Length : 0A
+[1F4h 0500 1] Bus : 00
+[1F5h 0501 1] Source : 05
+[1F6h 0502 4] Interrupt : 00000005
+[1FAh 0506 2] Flags (decoded below) : 000D
+ Polarity : 1
+ Trigger Mode : 3
+
+[1FCh 0508 1] Subtable Type : 02 [Interrupt Source Override]
+[1FDh 0509 1] Length : 0A
+[1FEh 0510 1] Bus : 00
+[1FFh 0511 1] Source : 09
+[200h 0512 4] Interrupt : 00000009
+[204h 0516 2] Flags (decoded below) : 000D
+ Polarity : 1
+ Trigger Mode : 3
+
+[206h 0518 1] Subtable Type : 02 [Interrupt Source Override]
+[207h 0519 1] Length : 0A
+[208h 0520 1] Bus : 00
+[209h 0521 1] Source : 0A
+[20Ah 0522 4] Interrupt : 0000000A
+[20Eh 0526 2] Flags (decoded below) : 000D
+ Polarity : 1
+ Trigger Mode : 3
+
+[210h 0528 1] Subtable Type : 02 [Interrupt Source Override]
+[211h 0529 1] Length : 0A
+[212h 0530 1] Bus : 00
+[213h 0531 1] Source : 0B
+[214h 0532 4] Interrupt : 0000000B
+[218h 0536 2] Flags (decoded below) : 000D
+ Polarity : 1
+ Trigger Mode : 3
+
+[21Ah 0538 1] Subtable Type : 04 [Local APIC NMI]
+[21Bh 0539 1] Length : 06
+[21Ch 0540 1] Processor ID : FF
+[21Dh 0541 2] Flags (decoded below) : 0000
+ Polarity : 0
+ Trigger Mode : 0
+[21Fh 0543 1] Interrupt Input LINT : 01
...
DSDT:
+/*
+ * Intel ACPI Component Architecture
+ * AML/ASL+ Disassembler version 20200925 (64-bit version)
+ * Copyright (c) 2000 - 2020 Intel Corporation
+ *
+ * Disassembling to symbolic ASL+ operators
+ *
+ * Disassembly of /tmp/aml-00O791, Wed Aug 23 21:51:31 2023
+ *
+ * Original Table Header:
+ * Signature "DSDT"
+ * Length 0x00003271 (12913)
+ * Revision 0x01 **** 32-bit table (V1), no 64-bit math support
+ * Checksum 0xAF
+ * OEM ID "BOCHS "
+ * OEM Table ID "BXPC "
+ * OEM Revision 0x00000001 (1)
+ * Compiler ID "BXPC"
+ * Compiler Version 0x00000001 (1)
+ */
+DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
+{
+ Scope (\)
+ {
+ OperationRegion (DBG, SystemIO, 0x0402, One)
+ Field (DBG, ByteAcc, NoLock, Preserve)
+ {
+ DBGB, 8
+ }
+
+ Method (DBUG, 1, NotSerialized)
+ {
+ ToHexString (Arg0, Local0)
+ ToBuffer (Local0, Local0)
+ Local1 = (SizeOf (Local0) - One)
+ Local2 = Zero
+ While ((Local2 < Local1))
+ {
+ DBGB = DerefOf (Local0 [Local2])
+ Local2++
+ }
+
+ DBGB = 0x0A
+ }
+ }
[snip]
+ Processor (C000, 0x00, 0x00000000, 0x00)
+ {
+ Method (_STA, 0, Serialized) // _STA: Status
+ {
+ Return (CSTA (Zero))
+ }
+
+ Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ {
+ 0x00, 0x08, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00 // ........
+ })
+ Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
+ {
+ COST (Zero, Arg0, Arg1, Arg2)
+ }
+ }
+
+ Processor (C001, 0x01, 0x00000000, 0x00)
+ {
+ Method (_STA, 0, Serialized) // _STA: Status
+ {
+ Return (CSTA (One))
+ }
+
+ Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ {
+ 0x00, 0x08, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00 // ........
+ })
+ Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device, x=0-9
+ {
+ CEJ0 (One)
+ }
+
+ Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
+ {
+ COST (One, Arg0, Arg1, Arg2)
+ }
+ }
[snip]
+ Processor (C035, 0x35, 0x00000000, 0x00)
+ {
+ Method (_STA, 0, Serialized) // _STA: Status
+ {
+ Return (CSTA (0x35))
+ }
+
+ Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ {
+ 0x00, 0x08, 0x35, 0x6A, 0x01, 0x00, 0x00, 0x00 // ..5j....
+ })
+ Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device, x=0-9
+ {
+ CEJ0 (0x35)
+ }
+
+ Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
+ {
+ COST (0x35, Arg0, Arg1, Arg2)
+ }
+ }
...
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231023094635.1588282-14-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
|
Zhao Liu
|
7ee18dcef1 |
tests: bios-tables-test: Add test for smbios type4 thread count
This tests the commit
|
|
|
Zhao Liu
|
85ccbe1275 |
tests: bios-tables-test: Prepare the ACPI table change for smbios type4 thread count test
Following the guidelines in tests/qtest/bios-tables-test.c, this is step 1 - 3. List the ACPI tables that will be added to test the thread count field of smbios type4 table. Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20231023094635.1588282-12-zhao1.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
|
|
Zhao Liu
|
f03359a85b |
tests: bios-tables-test: Update ACPI table binaries for smbios core count2 test
Change the core count2 from 275 to 260.
Following the guidelines in tests/qtest/bios-tables-test.c, this
is step 5 and 6.
Changes in the tables:
APIC:
/*
* Intel ACPI Component Architecture
* AML/ASL+ Disassembler version 20200925 (64-bit version)
* Copyright (c) 2000 - 2020 Intel Corporation
*
- * Disassembly of tests/data/acpi/q35/APIC.core-count2, Wed Aug 23 16:29:51 2023
+ * Disassembly of /tmp/aml-KQDX91, Wed Aug 23 16:29:51 2023
*
* ACPI Data Table [APIC]
*
* Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue
*/
[000h 0000 4] Signature : "APIC" [Multiple APIC Description Table (MADT)]
-[004h 0004 4] Table Length : 000009AE
+[004h 0004 4] Table Length : 00000CA6
[008h 0008 1] Revision : 03
-[009h 0009 1] Checksum : CE
+[009h 0009 1] Checksum : FA
[00Ah 0010 6] Oem ID : "BOCHS "
[010h 0016 8] Oem Table ID : "BXPC "
[018h 0024 4] Oem Revision : 00000001
[01Ch 0028 4] Asl Compiler ID : "BXPC"
[020h 0032 4] Asl Compiler Revision : 00000001
[024h 0036 4] Local Apic Address : FEE00000
[028h 0040 4] Flags (decoded below) : 00000001
PC-AT Compatibility : 1
[02Ch 0044 1] Subtable Type : 00 [Processor Local APIC]
[02Dh 0045 1] Length : 08
[02Eh 0046 1] Processor ID : 00
[02Fh 0047 1] Local Apic ID : 00
[030h 0048 4] Flags (decoded below) : 00000001
Processor Enabled : 1
@@ -1051,1256 +1051,1136 @@
[42Ch 1068 1] Subtable Type : 00 [Processor Local APIC]
[42Dh 1069 1] Length : 08
[42Eh 1070 1] Processor ID : 80
[42Fh 1071 1] Local Apic ID : 80
[430h 1072 4] Flags (decoded below) : 00000001
Processor Enabled : 1
Runtime Online Capable : 0
[434h 1076 1] Subtable Type : 00 [Processor Local APIC]
[435h 1077 1] Length : 08
[436h 1078 1] Processor ID : 81
[437h 1079 1] Local Apic ID : 81
[438h 1080 4] Flags (decoded below) : 00000001
Processor Enabled : 1
Runtime Online Capable : 0
-[43Ch 1084 1] Subtable Type : 00 [Processor Local APIC]
-[43Dh 1085 1] Length : 08
-[43Eh 1086 1] Processor ID : 82
-[43Fh 1087 1] Local Apic ID : 82
-[440h 1088 4] Flags (decoded below) : 00000001
- Processor Enabled : 1
- Runtime Online Capable : 0
-
-[444h 1092 1] Subtable Type : 00 [Processor Local APIC]
-[445h 1093 1] Length : 08
-[446h 1094 1] Processor ID : 83
-[447h 1095 1] Local Apic ID : 83
-[448h 1096 4] Flags (decoded below) : 00000001
- Processor Enabled : 1
- Runtime Online Capable : 0
[snip]
-
-[964h 2404 1] Subtable Type : 01 [I/O APIC]
-[965h 2405 1] Length : 0C
-[966h 2406 1] I/O Apic ID : 00
-[967h 2407 1] Reserved : 00
-[968h 2408 4] Address : FEC00000
-[96Ch 2412 4] Interrupt : 00000000
-
-[970h 2416 1] Subtable Type : 02 [Interrupt Source Override]
-[971h 2417 1] Length : 0A
-[972h 2418 1] Bus : 00
-[973h 2419 1] Source : 00
-[974h 2420 4] Interrupt : 00000002
-[978h 2424 2] Flags (decoded below) : 0000
+[43Ch 1084 1] Subtable Type : 09 [Processor Local x2APIC]
+[43Dh 1085 1] Length : 10
+[43Eh 1086 2] Reserved : 0000
+[440h 1088 4] Processor x2Apic ID : 00000100
+[444h 1092 4] Flags (decoded below) : 00000001
+ Processor Enabled : 1
+[448h 1096 4] Processor UID : 00000082
+
+[44Ch 1100 1] Subtable Type : 09 [Processor Local x2APIC]
+[44Dh 1101 1] Length : 10
+[44Eh 1102 2] Reserved : 0000
+[450h 1104 4] Processor x2Apic ID : 00000101
+[454h 1108 4] Flags (decoded below) : 00000001
+ Processor Enabled : 1
+[458h 1112 4] Processor UID : 00000083
+
[snip]
+
+[C68h 3176 1] Subtable Type : 02 [Interrupt Source Override]
+[C69h 3177 1] Length : 0A
+[C6Ah 3178 1] Bus : 00
+[C6Bh 3179 1] Source : 00
+[C6Ch 3180 4] Interrupt : 00000002
+[C70h 3184 2] Flags (decoded below) : 0000
Polarity : 0
Trigger Mode : 0
-[97Ah 2426 1] Subtable Type : 02 [Interrupt Source Override]
-[97Bh 2427 1] Length : 0A
-[97Ch 2428 1] Bus : 00
-[97Dh 2429 1] Source : 05
-[97Eh 2430 4] Interrupt : 00000005
-[982h 2434 2] Flags (decoded below) : 000D
+[C72h 3186 1] Subtable Type : 02 [Interrupt Source Override]
+[C73h 3187 1] Length : 0A
+[C74h 3188 1] Bus : 00
+[C75h 3189 1] Source : 05
+[C76h 3190 4] Interrupt : 00000005
+[C7Ah 3194 2] Flags (decoded below) : 000D
Polarity : 1
Trigger Mode : 3
-[984h 2436 1] Subtable Type : 02 [Interrupt Source Override]
-[985h 2437 1] Length : 0A
-[986h 2438 1] Bus : 00
-[987h 2439 1] Source : 09
-[988h 2440 4] Interrupt : 00000009
-[98Ch 2444 2] Flags (decoded below) : 000D
+[C7Ch 3196 1] Subtable Type : 02 [Interrupt Source Override]
+[C7Dh 3197 1] Length : 0A
+[C7Eh 3198 1] Bus : 00
+[C7Fh 3199 1] Source : 09
+[C80h 3200 4] Interrupt : 00000009
+[C84h 3204 2] Flags (decoded below) : 000D
Polarity : 1
Trigger Mode : 3
-[98Eh 2446 1] Subtable Type : 02 [Interrupt Source Override]
-[98Fh 2447 1] Length : 0A
-[990h 2448 1] Bus : 00
-[991h 2449 1] Source : 0A
-[992h 2450 4] Interrupt : 0000000A
-[996h 2454 2] Flags (decoded below) : 000D
+[C86h 3206 1] Subtable Type : 02 [Interrupt Source Override]
+[C87h 3207 1] Length : 0A
+[C88h 3208 1] Bus : 00
+[C89h 3209 1] Source : 0A
+[C8Ah 3210 4] Interrupt : 0000000A
+[C8Eh 3214 2] Flags (decoded below) : 000D
Polarity : 1
Trigger Mode : 3
-[998h 2456 1] Subtable Type : 02 [Interrupt Source Override]
-[999h 2457 1] Length : 0A
-[99Ah 2458 1] Bus : 00
-[99Bh 2459 1] Source : 0B
-[99Ch 2460 4] Interrupt : 0000000B
-[9A0h 2464 2] Flags (decoded below) : 000D
+[C90h 3216 1] Subtable Type : 02 [Interrupt Source Override]
+[C91h 3217 1] Length : 0A
+[C92h 3218 1] Bus : 00
+[C93h 3219 1] Source : 0B
+[C94h 3220 4] Interrupt : 0000000B
+[C98h 3224 2] Flags (decoded below) : 000D
Polarity : 1
Trigger Mode : 3
-[9A2h 2466 1] Subtable Type : 0A [Local x2APIC NMI]
-[9A3h 2467 1] Length : 0C
-[9A4h 2468 2] Flags (decoded below) : 0000
+[C9Ah 3226 1] Subtable Type : 0A [Local x2APIC NMI]
+[C9Bh 3227 1] Length : 0C
+[C9Ch 3228 2] Flags (decoded below) : 0000
Polarity : 0
Trigger Mode : 0
-[9A6h 2470 4] Processor UID : FFFFFFFF
-[9AAh 2474 1] Interrupt Input LINT : 01
-[9ABh 2475 3] Reserved : 000000
+[C9Eh 3230 4] Processor UID : FFFFFFFF
+[CA2h 3234 1] Interrupt Input LINT : 01
+[CA3h 3235 3] Reserved : 000000
...
DSDT:
/*
* Intel ACPI Component Architecture
* AML/ASL+ Disassembler version 20200925 (64-bit version)
* Copyright (c) 2000 - 2020 Intel Corporation
*
* Disassembling to symbolic ASL+ operators
*
- * Disassembly of tests/data/acpi/q35/DSDT.core-count2, Wed Aug 23 16:29:51 2023
+ * Disassembly of /tmp/aml-6DDX91, Wed Aug 23 16:29:51 2023
*
* Original Table Header:
* Signature "DSDT"
- * Length 0x00007EEF (32495)
+ * Length 0x000083EA (33770)
* Revision 0x01 **** 32-bit table (V1), no 64-bit math support
- * Checksum 0x52
+ * Checksum 0x01
* OEM ID "BOCHS "
* OEM Table ID "BXPC "
* OEM Revision 0x00000001 (1)
* Compiler ID "BXPC"
* Compiler Version 0x00000001 (1)
*/
DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
{
Scope (\)
{
OperationRegion (DBG, SystemIO, 0x0402, One)
Field (DBG, ByteAcc, NoLock, Preserve)
{
DBGB, 8
}
@@ -4196,107 +4196,32 @@
}
If ((Arg0 == 0x0101))
{
Notify (C101, Arg1)
}
If ((Arg0 == 0x0102))
{
Notify (C102, Arg1)
}
If ((Arg0 == 0x0103))
{
Notify (C103, Arg1)
}
-
- If ((Arg0 == 0x0104))
- {
- Notify (C104, Arg1)
- }
-
- If ((Arg0 == 0x0105))
- {
- Notify (C105, Arg1)
- }
-
- If ((Arg0 == 0x0106))
- {
- Notify (C106, Arg1)
- }
-
[snip]
- If ((Arg0 == 0x0112))
- {
- Notify (C112, Arg1)
- }
}
Method (CSTA, 1, Serialized)
{
Acquire (\_SB.PCI0.PRES.CPLK, 0xFFFF)
\_SB.PCI0.PRES.CSEL = Arg0
Local0 = Zero
If ((\_SB.PCI0.PRES.CPEN == One))
{
Local0 = 0x0F
}
Release (\_SB.PCI0.PRES.CPLK)
Return (Local0)
}
@@ -4306,33 +4231,33 @@
\_SB.PCI0.PRES.CSEL = Arg0
\_SB.PCI0.PRES.CEJ0 = One
Release (\_SB.PCI0.PRES.CPLK)
}
Method (CSCN, 0, Serialized)
{
Acquire (\_SB.PCI0.PRES.CPLK, 0xFFFF)
Name (CNEW, Package (0xFF) {})
Local3 = Zero
Local4 = One
While ((Local4 == One))
{
Local4 = Zero
Local0 = One
Local1 = Zero
- While (((Local0 == One) && (Local3 < 0x0113)))
+ While (((Local0 == One) && (Local3 < 0x0104)))
{
Local0 = Zero
\_SB.PCI0.PRES.CSEL = Local3
\_SB.PCI0.PRES.CCMD = Zero
If ((\_SB.PCI0.PRES.CDAT < Local3))
{
Break
}
If ((Local1 == 0xFF))
{
Local4 = One
Break
}
Local3 = \_SB.PCI0.PRES.CDAT
@@ -7220,3281 +7145,3281 @@
Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
{
0x00, 0x08, 0x81, 0x81, 0x01, 0x00, 0x00, 0x00 // ........
})
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device, x=0-9
{
CEJ0 (0x81)
}
Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
{
COST (0x81, Arg0, Arg1, Arg2)
}
}
- Processor (C082, 0x82, 0x00000000, 0x00)
+ Device (C082)
{
+ Name (_HID, "ACPI0007" /* Processor Device */) // _HID: Hardware ID
+ Name (_UID, 0x82) // _UID: Unique ID
Method (_STA, 0, Serialized) // _STA: Status
{
Return (CSTA (0x82))
}
- Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ Name (_MAT, Buffer (0x10) // _MAT: Multiple APIC Table Entry
{
- 0x00, 0x08, 0x82, 0x82, 0x01, 0x00, 0x00, 0x00 // ........
+ /* 0000 */ 0x09, 0x10, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, // ........
+ /* 0008 */ 0x01, 0x00, 0x00, 0x00, 0x82, 0x00, 0x00, 0x00 // ........
})
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device, x=0-9
{
CEJ0 (0x82)
}
Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
{
COST (0x82, Arg0, Arg1, Arg2)
}
}
- Processor (C083, 0x83, 0x00000000, 0x00)
+ Device (C083)
{
+ Name (_HID, "ACPI0007" /* Processor Device */) // _HID: Hardware ID
+ Name (_UID, 0x83) // _UID: Unique ID
Method (_STA, 0, Serialized) // _STA: Status
{
Return (CSTA (0x83))
}
- Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ Name (_MAT, Buffer (0x10) // _MAT: Multiple APIC Table Entry
{
- 0x00, 0x08, 0x83, 0x83, 0x01, 0x00, 0x00, 0x00 // ........
+ /* 0000 */ 0x09, 0x10, 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, // ........
+ /* 0008 */ 0x01, 0x00, 0x00, 0x00, 0x83, 0x00, 0x00, 0x00 // ........
})
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device, x=0-9
{
CEJ0 (0x83)
}
Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
{
COST (0x83, Arg0, Arg1, Arg2)
}
}
- Processor (C084, 0x84, 0x00000000, 0x00)
+ Device (C084)
{
+ Name (_HID, "ACPI0007" /* Processor Device */) // _HID: Hardware ID
+ Name (_UID, 0x84) // _UID: Unique ID
Method (_STA, 0, Serialized) // _STA: Status
{
Return (CSTA (0x84))
}
- Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ Name (_MAT, Buffer (0x10) // _MAT: Multiple APIC Table Entry
{
- 0x00, 0x08, 0x84, 0x84, 0x01, 0x00, 0x00, 0x00 // ........
+ /* 0000 */ 0x09, 0x10, 0x00, 0x00, 0x02, 0x01, 0x00, 0x00, // ........
+ /* 0008 */ 0x01, 0x00, 0x00, 0x00, 0x84, 0x00, 0x00, 0x00 // ........
})
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device, x=0-9
{
CEJ0 (0x84)
}
Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
{
COST (0x84, Arg0, Arg1, Arg2)
}
}
[snip]
- Processor (C0FE, 0xFE, 0x00000000, 0x00)
+ Device (C0FE)
{
+ Name (_HID, "ACPI0007" /* Processor Device */) // _HID: Hardware ID
+ Name (_UID, 0xFE) // _UID: Unique ID
Method (_STA, 0, Serialized) // _STA: Status
{
Return (CSTA (0xFE))
}
- Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ Name (_MAT, Buffer (0x10) // _MAT: Multiple APIC Table Entry
{
- 0x00, 0x08, 0xFE, 0xFE, 0x01, 0x00, 0x00, 0x00 // ........
+ /* 0000 */ 0x09, 0x10, 0x00, 0x00, 0x7C, 0x01, 0x00, 0x00, // ....|...
+ /* 0008 */ 0x01, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x00 // ........
})
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device, x=0-9
{
CEJ0 (0xFE)
}
Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
{
COST (0xFE, Arg0, Arg1, Arg2)
}
}
...
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231023094635.1588282-11-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
|
Zhao Liu
|
6dc82e3222 |
tests: bios-tables-test: Extend smbios core count2 test to cover general topology
The commit
|
|
|
Zhao Liu
|
c63fcb2c10 |
tests: bios-tables-test: Prepare the ACPI table change for smbios type4 core count2 test
Following the guidelines in tests/qtest/bios-tables-test.c, this is step 1 - 3. List the ACPI tables that will be changed about the type 4 core count2 test case. Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20231023094635.1588282-9-zhao1.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
|
|
Zhao Liu
|
61ace1d772 |
tests: bios-tables-test: Add ACPI table binaries for smbios type4 core count test
Following the guidelines in tests/qtest/bios-tables-test.c, this
is step 5 and 6.
Changes in the tables:
FACP:
+/*
+ * Intel ACPI Component Architecture
+ * AML/ASL+ Disassembler version 20200925 (64-bit version)
+ * Copyright (c) 2000 - 2020 Intel Corporation
+ *
+ * Disassembly of /tmp/aml-Y6WW91, Wed Aug 23 15:43:43 2023
+ *
+ * ACPI Data Table [FACP]
+ *
+ * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue
+ */
+
+[000h 0000 4] Signature : "FACP" [Fixed ACPI Description Table (FADT)]
+[004h 0004 4] Table Length : 000000F4
+[008h 0008 1] Revision : 03
+[009h 0009 1] Checksum : B3
+[00Ah 0010 6] Oem ID : "BOCHS "
+[010h 0016 8] Oem Table ID : "BXPC "
+[018h 0024 4] Oem Revision : 00000001
+[01Ch 0028 4] Asl Compiler ID : "BXPC"
+[020h 0032 4] Asl Compiler Revision : 00000001
+
+[024h 0036 4] FACS Address : 00000000
+[028h 0040 4] DSDT Address : 00000000
+[02Ch 0044 1] Model : 01
+[02Dh 0045 1] PM Profile : 00 [Unspecified]
+[02Eh 0046 2] SCI Interrupt : 0009
+[030h 0048 4] SMI Command Port : 000000B2
+[034h 0052 1] ACPI Enable Value : 02
+[035h 0053 1] ACPI Disable Value : 03
+[036h 0054 1] S4BIOS Command : 00
+[037h 0055 1] P-State Control : 00
+[038h 0056 4] PM1A Event Block Address : 00000600
+[03Ch 0060 4] PM1B Event Block Address : 00000000
+[040h 0064 4] PM1A Control Block Address : 00000604
+[044h 0068 4] PM1B Control Block Address : 00000000
+[048h 0072 4] PM2 Control Block Address : 00000000
+[04Ch 0076 4] PM Timer Block Address : 00000608
+[050h 0080 4] GPE0 Block Address : 00000620
+[054h 0084 4] GPE1 Block Address : 00000000
+[058h 0088 1] PM1 Event Block Length : 04
+[059h 0089 1] PM1 Control Block Length : 02
+[05Ah 0090 1] PM2 Control Block Length : 00
+[05Bh 0091 1] PM Timer Block Length : 04
+[05Ch 0092 1] GPE0 Block Length : 10
+[05Dh 0093 1] GPE1 Block Length : 00
+[05Eh 0094 1] GPE1 Base Offset : 00
+[05Fh 0095 1] _CST Support : 00
+[060h 0096 2] C2 Latency : 0FFF
+[062h 0098 2] C3 Latency : 0FFF
+[064h 0100 2] CPU Cache Size : 0000
+[066h 0102 2] Cache Flush Stride : 0000
+[068h 0104 1] Duty Cycle Offset : 00
+[069h 0105 1] Duty Cycle Width : 00
+[06Ah 0106 1] RTC Day Alarm Index : 00
+[06Bh 0107 1] RTC Month Alarm Index : 00
+[06Ch 0108 1] RTC Century Index : 32
+[06Dh 0109 2] Boot Flags (decoded below) : 0002
+ Legacy Devices Supported (V2) : 0
+ 8042 Present on ports 60/64 (V2) : 1
+ VGA Not Present (V4) : 0
+ MSI Not Supported (V4) : 0
+ PCIe ASPM Not Supported (V4) : 0
+ CMOS RTC Not Present (V5) : 0
+[06Fh 0111 1] Reserved : 00
+[070h 0112 4] Flags (decoded below) : 000484A5
+ WBINVD instruction is operational (V1) : 1
+ WBINVD flushes all caches (V1) : 0
+ All CPUs support C1 (V1) : 1
+ C2 works on MP system (V1) : 0
+ Control Method Power Button (V1) : 0
+ Control Method Sleep Button (V1) : 1
+ RTC wake not in fixed reg space (V1) : 0
+ RTC can wake system from S4 (V1) : 1
+ 32-bit PM Timer (V1) : 0
+ Docking Supported (V1) : 0
+ Reset Register Supported (V2) : 1
+ Sealed Case (V3) : 0
+ Headless - No Video (V3) : 0
+ Use native instr after SLP_TYPx (V3) : 0
+ PCIEXP_WAK Bits Supported (V4) : 0
+ Use Platform Timer (V4) : 1
+ RTC_STS valid on S4 wake (V4) : 0
+ Remote Power-on capable (V4) : 0
+ Use APIC Cluster Model (V4) : 1
+ Use APIC Physical Destination Mode (V4) : 0
+ Hardware Reduced (V5) : 0
+ Low Power S0 Idle (V5) : 0
+
+[074h 0116 12] Reset Register : [Generic Address Structure]
+[074h 0116 1] Space ID : 01 [SystemIO]
+[075h 0117 1] Bit Width : 08
+[076h 0118 1] Bit Offset : 00
+[077h 0119 1] Encoded Access Width : 00 [Undefined/Legacy]
+[078h 0120 8] Address : 0000000000000CF9
+
+[080h 0128 1] Value to cause reset : 0F
+[081h 0129 2] ARM Flags (decoded below) : 0000
+ PSCI Compliant : 0
+ Must use HVC for PSCI : 0
+
+[083h 0131 1] FADT Minor Revision : 00
+[084h 0132 8] FACS Address : 0000000000000000
+[08Ch 0140 8] DSDT Address : 0000000000000000
+[094h 0148 12] PM1A Event Block : [Generic Address Structure]
+[094h 0148 1] Space ID : 01 [SystemIO]
+[095h 0149 1] Bit Width : 20
+[096h 0150 1] Bit Offset : 00
+[097h 0151 1] Encoded Access Width : 00 [Undefined/Legacy]
+[098h 0152 8] Address : 0000000000000600
+
+[0A0h 0160 12] PM1B Event Block : [Generic Address Structure]
+[0A0h 0160 1] Space ID : 00 [SystemMemory]
+[0A1h 0161 1] Bit Width : 00
+[0A2h 0162 1] Bit Offset : 00
+[0A3h 0163 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0A4h 0164 8] Address : 0000000000000000
+
+[0ACh 0172 12] PM1A Control Block : [Generic Address Structure]
+[0ACh 0172 1] Space ID : 01 [SystemIO]
+[0ADh 0173 1] Bit Width : 10
+[0AEh 0174 1] Bit Offset : 00
+[0AFh 0175 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0B0h 0176 8] Address : 0000000000000604
+
+[0B8h 0184 12] PM1B Control Block : [Generic Address Structure]
+[0B8h 0184 1] Space ID : 00 [SystemMemory]
+[0B9h 0185 1] Bit Width : 00
+[0BAh 0186 1] Bit Offset : 00
+[0BBh 0187 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0BCh 0188 8] Address : 0000000000000000
+
+[0C4h 0196 12] PM2 Control Block : [Generic Address Structure]
+[0C4h 0196 1] Space ID : 00 [SystemMemory]
+[0C5h 0197 1] Bit Width : 00
+[0C6h 0198 1] Bit Offset : 00
+[0C7h 0199 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0C8h 0200 8] Address : 0000000000000000
+
+[0D0h 0208 12] PM Timer Block : [Generic Address Structure]
+[0D0h 0208 1] Space ID : 01 [SystemIO]
+[0D1h 0209 1] Bit Width : 20
+[0D2h 0210 1] Bit Offset : 00
+[0D3h 0211 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0D4h 0212 8] Address : 0000000000000608
+
+[0DCh 0220 12] GPE0 Block : [Generic Address Structure]
+[0DCh 0220 1] Space ID : 01 [SystemIO]
+[0DDh 0221 1] Bit Width : 80
+[0DEh 0222 1] Bit Offset : 00
+[0DFh 0223 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0E0h 0224 8] Address : 0000000000000620
+
+[0E8h 0232 12] GPE1 Block : [Generic Address Structure]
+[0E8h 0232 1] Space ID : 00 [SystemMemory]
+[0E9h 0233 1] Bit Width : 00
+[0EAh 0234 1] Bit Offset : 00
+[0EBh 0235 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0ECh 0236 8] Address : 0000000000000000
...
APIC:
+/*
+ * Intel ACPI Component Architecture
+ * AML/ASL+ Disassembler version 20200925 (64-bit version)
+ * Copyright (c) 2000 - 2020 Intel Corporation
+ *
+ * Disassembly of /tmp/aml-FFXW91, Wed Aug 23 15:43:43 2023
+ *
+ * ACPI Data Table [APIC]
+ *
+ * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue
+ */
+
+[000h 0000 4] Signature : "APIC" [Multiple APIC Description Table (MADT)]
+[004h 0004 4] Table Length : 00000220
+[008h 0008 1] Revision : 03
+[009h 0009 1] Checksum : 3C
+[00Ah 0010 6] Oem ID : "BOCHS "
+[010h 0016 8] Oem Table ID : "BXPC "
+[018h 0024 4] Oem Revision : 00000001
+[01Ch 0028 4] Asl Compiler ID : "BXPC"
+[020h 0032 4] Asl Compiler Revision : 00000001
+
+[024h 0036 4] Local Apic Address : FEE00000
+[028h 0040 4] Flags (decoded below) : 00000001
+ PC-AT Compatibility : 1
+
+[02Ch 0044 1] Subtable Type : 00 [Processor Local APIC]
+[02Dh 0045 1] Length : 08
+[02Eh 0046 1] Processor ID : 00
+[02Fh 0047 1] Local Apic ID : 00
+[030h 0048 4] Flags (decoded below) : 00000001
+ Processor Enabled : 1
+ Runtime Online Capable : 0
[snip]
+[1D4h 0468 1] Subtable Type : 00 [Processor Local APIC]
+[1D5h 0469 1] Length : 08
+[1D6h 0470 1] Processor ID : 35
+[1D7h 0471 1] Local Apic ID : 6A
+[1D8h 0472 4] Flags (decoded below) : 00000001
+ Processor Enabled : 1
+ Runtime Online Capable : 0
+
+[1DCh 0476 1] Subtable Type : 01 [I/O APIC]
+[1DDh 0477 1] Length : 0C
+[1DEh 0478 1] I/O Apic ID : 00
+[1DFh 0479 1] Reserved : 00
+[1E0h 0480 4] Address : FEC00000
+[1E4h 0484 4] Interrupt : 00000000
+
+[1E8h 0488 1] Subtable Type : 02 [Interrupt Source Override]
+[1E9h 0489 1] Length : 0A
+[1EAh 0490 1] Bus : 00
+[1EBh 0491 1] Source : 00
+[1ECh 0492 4] Interrupt : 00000002
+[1F0h 0496 2] Flags (decoded below) : 0000
+ Polarity : 0
+ Trigger Mode : 0
+
+[1F2h 0498 1] Subtable Type : 02 [Interrupt Source Override]
+[1F3h 0499 1] Length : 0A
+[1F4h 0500 1] Bus : 00
+[1F5h 0501 1] Source : 05
+[1F6h 0502 4] Interrupt : 00000005
+[1FAh 0506 2] Flags (decoded below) : 000D
+ Polarity : 1
+ Trigger Mode : 3
+
+[1FCh 0508 1] Subtable Type : 02 [Interrupt Source Override]
+[1FDh 0509 1] Length : 0A
+[1FEh 0510 1] Bus : 00
+[1FFh 0511 1] Source : 09
+[200h 0512 4] Interrupt : 00000009
+[204h 0516 2] Flags (decoded below) : 000D
+ Polarity : 1
+ Trigger Mode : 3
+
+[206h 0518 1] Subtable Type : 02 [Interrupt Source Override]
+[207h 0519 1] Length : 0A
+[208h 0520 1] Bus : 00
+[209h 0521 1] Source : 0A
+[20Ah 0522 4] Interrupt : 0000000A
+[20Eh 0526 2] Flags (decoded below) : 000D
+ Polarity : 1
+ Trigger Mode : 3
+
+[210h 0528 1] Subtable Type : 02 [Interrupt Source Override]
+[211h 0529 1] Length : 0A
+[212h 0530 1] Bus : 00
+[213h 0531 1] Source : 0B
+[214h 0532 4] Interrupt : 0000000B
+[218h 0536 2] Flags (decoded below) : 000D
+ Polarity : 1
+ Trigger Mode : 3
+
+[21Ah 0538 1] Subtable Type : 04 [Local APIC NMI]
+[21Bh 0539 1] Length : 06
+[21Ch 0540 1] Processor ID : FF
+[21Dh 0541 2] Flags (decoded below) : 0000
+ Polarity : 0
+ Trigger Mode : 0
+[21Fh 0543 1] Interrupt Input LINT : 01
...
DSDT:
+/*
+ * Intel ACPI Component Architecture
+ * AML/ASL+ Disassembler version 20200925 (64-bit version)
+ * Copyright (c) 2000 - 2020 Intel Corporation
+ *
+ * Disassembling to symbolic ASL+ operators
+ *
+ * Disassembly of /tmp/aml-9ZXW91, Wed Aug 23 15:43:43 2023
+ *
+ * Original Table Header:
+ * Signature "DSDT"
+ * Length 0x00003271 (12913)
+ * Revision 0x01 **** 32-bit table (V1), no 64-bit math support
+ * Checksum 0xAF
+ * OEM ID "BOCHS "
+ * OEM Table ID "BXPC "
+ * OEM Revision 0x00000001 (1)
+ * Compiler ID "BXPC"
+ * Compiler Version 0x00000001 (1)
+ */
+DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
+{
+ Scope (\)
+ {
+ OperationRegion (DBG, SystemIO, 0x0402, One)
+ Field (DBG, ByteAcc, NoLock, Preserve)
+ {
+ DBGB, 8
+ }
+
+ Method (DBUG, 1, NotSerialized)
+ {
+ ToHexString (Arg0, Local0)
+ ToBuffer (Local0, Local0)
+ Local1 = (SizeOf (Local0) - One)
+ Local2 = Zero
+ While ((Local2 < Local1))
+ {
+ DBGB = DerefOf (Local0 [Local2])
+ Local2++
+ }
+
+ DBGB = 0x0A
+ }
+ }
[snip]
+ Device (\_SB.CPUS)
+ {
+ Name (_HID, "ACPI0010" /* Processor Container Device */) // _HID: Hardware ID
+ Name (_CID, EisaId ("PNP0A05") /* Generic Container Device */) // _CID: Compatible ID
+ Method (CTFY, 2, NotSerialized)
+ {
+ If ((Arg0 == Zero))
+ {
+ Notify (C000, Arg1)
+ }
+
+ If ((Arg0 == One))
+ {
+ Notify (C001, Arg1)
+ }
[snip]
+ If ((Arg0 == 0x35))
+ {
+ Notify (C035, Arg1)
+ }
+ }
[snip]
+ Processor (C000, 0x00, 0x00000000, 0x00)
+ {
+ Method (_STA, 0, Serialized) // _STA: Status
+ {
+ Return (CSTA (Zero))
+ }
+
+ Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ {
+ 0x00, 0x08, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00 // ........
+ })
+ Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
+ {
+ COST (Zero, Arg0, Arg1, Arg2)
+ }
+ }
+
+ Processor (C001, 0x01, 0x00000000, 0x00)
+ {
+ Method (_STA, 0, Serialized) // _STA: Status
+ {
+ Return (CSTA (One))
+ }
+
+ Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ {
+ 0x00, 0x08, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00 // ........
+ })
+ Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device, x=0-9
+ {
+ CEJ0 (One)
+ }
+
+ Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
+ {
+ COST (One, Arg0, Arg1, Arg2)
+ }
+ }
[snip]
+ Processor (C035, 0x35, 0x00000000, 0x00)
+ {
+ Method (_STA, 0, Serialized) // _STA: Status
+ {
+ Return (CSTA (0x35))
+ }
+
+ Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ {
+ 0x00, 0x08, 0x35, 0x6A, 0x01, 0x00, 0x00, 0x00 // ..5j....
+ })
+ Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device, x=0-9
+ {
+ CEJ0 (0x35)
+ }
+
+ Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
+ {
+ COST (0x35, Arg0, Arg1, Arg2)
+ }
+ }
...
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231023094635.1588282-8-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
|
Zhao Liu
|
148a8a1d5f |
tests: bios-tables-test: Add test for smbios type4 core count
This tests the commit
|
|
|
Zhao Liu
|
623d26ad9a |
tests: bios-tables-test: Prepare the ACPI table change for smbios type4 core count test
Following the guidelines in tests/qtest/bios-tables-test.c, this is step 1 - 3. List the ACPI tables that will be added to test the type 4 core count field. Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20231023094635.1588282-6-zhao1.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
|
|
Zhao Liu
|
c1cd1d360d |
tests: bios-tables-test: Add ACPI table binaries for smbios type4 count test
Following the guidelines in tests/qtest/bios-tables-test.c, this
is step 5 and 6.
Changes in the tables:
FACP:
+/*
+ * Intel ACPI Component Architecture
+ * AML/ASL+ Disassembler version 20200925 (64-bit version)
+ * Copyright (c) 2000 - 2020 Intel Corporation
+ *
+ * Disassembly of /tmp/aml-W37791, Wed Aug 23 10:36:32 2023
+ *
+ * ACPI Data Table [FACP]
+ *
+ * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue
+ */
+
+[000h 0000 4] Signature : "FACP" [Fixed ACPI Description Table (FADT)]
+[004h 0004 4] Table Length : 000000F4
+[008h 0008 1] Revision : 03
+[009h 0009 1] Checksum : B3
+[00Ah 0010 6] Oem ID : "BOCHS "
+[010h 0016 8] Oem Table ID : "BXPC "
+[018h 0024 4] Oem Revision : 00000001
+[01Ch 0028 4] Asl Compiler ID : "BXPC"
+[020h 0032 4] Asl Compiler Revision : 00000001
+
+[024h 0036 4] FACS Address : 00000000
+[028h 0040 4] DSDT Address : 00000000
+[02Ch 0044 1] Model : 01
+[02Dh 0045 1] PM Profile : 00 [Unspecified]
+[02Eh 0046 2] SCI Interrupt : 0009
+[030h 0048 4] SMI Command Port : 000000B2
+[034h 0052 1] ACPI Enable Value : 02
+[035h 0053 1] ACPI Disable Value : 03
+[036h 0054 1] S4BIOS Command : 00
+[037h 0055 1] P-State Control : 00
+[038h 0056 4] PM1A Event Block Address : 00000600
+[03Ch 0060 4] PM1B Event Block Address : 00000000
+[040h 0064 4] PM1A Control Block Address : 00000604
+[044h 0068 4] PM1B Control Block Address : 00000000
+[048h 0072 4] PM2 Control Block Address : 00000000
+[04Ch 0076 4] PM Timer Block Address : 00000608
+[050h 0080 4] GPE0 Block Address : 00000620
+[054h 0084 4] GPE1 Block Address : 00000000
+[058h 0088 1] PM1 Event Block Length : 04
+[059h 0089 1] PM1 Control Block Length : 02
+[05Ah 0090 1] PM2 Control Block Length : 00
+[05Bh 0091 1] PM Timer Block Length : 04
+[05Ch 0092 1] GPE0 Block Length : 10
+[05Dh 0093 1] GPE1 Block Length : 00
+[05Eh 0094 1] GPE1 Base Offset : 00
+[05Fh 0095 1] _CST Support : 00
+[060h 0096 2] C2 Latency : 0FFF
+[062h 0098 2] C3 Latency : 0FFF
+[064h 0100 2] CPU Cache Size : 0000
+[066h 0102 2] Cache Flush Stride : 0000
+[068h 0104 1] Duty Cycle Offset : 00
+[069h 0105 1] Duty Cycle Width : 00
+[06Ah 0106 1] RTC Day Alarm Index : 00
+[06Bh 0107 1] RTC Month Alarm Index : 00
+[06Ch 0108 1] RTC Century Index : 32
+[06Dh 0109 2] Boot Flags (decoded below) : 0002
+ Legacy Devices Supported (V2) : 0
+ 8042 Present on ports 60/64 (V2) : 1
+ VGA Not Present (V4) : 0
+ MSI Not Supported (V4) : 0
+ PCIe ASPM Not Supported (V4) : 0
+ CMOS RTC Not Present (V5) : 0
+[06Fh 0111 1] Reserved : 00
+[070h 0112 4] Flags (decoded below) : 000484A5
+ WBINVD instruction is operational (V1) : 1
+ WBINVD flushes all caches (V1) : 0
+ All CPUs support C1 (V1) : 1
+ C2 works on MP system (V1) : 0
+ Control Method Power Button (V1) : 0
+ Control Method Sleep Button (V1) : 1
+ RTC wake not in fixed reg space (V1) : 0
+ RTC can wake system from S4 (V1) : 1
+ 32-bit PM Timer (V1) : 0
+ Docking Supported (V1) : 0
+ Reset Register Supported (V2) : 1
+ Sealed Case (V3) : 0
+ Headless - No Video (V3) : 0
+ Use native instr after SLP_TYPx (V3) : 0
+ PCIEXP_WAK Bits Supported (V4) : 0
+ Use Platform Timer (V4) : 1
+ RTC_STS valid on S4 wake (V4) : 0
+ Remote Power-on capable (V4) : 0
+ Use APIC Cluster Model (V4) : 1
+ Use APIC Physical Destination Mode (V4) : 0
+ Hardware Reduced (V5) : 0
+ Low Power S0 Idle (V5) : 0
+
+[074h 0116 12] Reset Register : [Generic Address Structure]
+[074h 0116 1] Space ID : 01 [SystemIO]
+[075h 0117 1] Bit Width : 08
+[076h 0118 1] Bit Offset : 00
+[077h 0119 1] Encoded Access Width : 00 [Undefined/Legacy]
+[078h 0120 8] Address : 0000000000000CF9
+
+[080h 0128 1] Value to cause reset : 0F
+[081h 0129 2] ARM Flags (decoded below) : 0000
+ PSCI Compliant : 0
+ Must use HVC for PSCI : 0
+
+[083h 0131 1] FADT Minor Revision : 00
+[084h 0132 8] FACS Address : 0000000000000000
+[08Ch 0140 8] DSDT Address : 0000000000000000
+[094h 0148 12] PM1A Event Block : [Generic Address Structure]
+[094h 0148 1] Space ID : 01 [SystemIO]
+[095h 0149 1] Bit Width : 20
+[096h 0150 1] Bit Offset : 00
+[097h 0151 1] Encoded Access Width : 00 [Undefined/Legacy]
+[098h 0152 8] Address : 0000000000000600
+
+[0A0h 0160 12] PM1B Event Block : [Generic Address Structure]
+[0A0h 0160 1] Space ID : 00 [SystemMemory]
+[0A1h 0161 1] Bit Width : 00
+[0A2h 0162 1] Bit Offset : 00
+[0A3h 0163 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0A4h 0164 8] Address : 0000000000000000
+
+[0ACh 0172 12] PM1A Control Block : [Generic Address Structure]
+[0ACh 0172 1] Space ID : 01 [SystemIO]
+[0ADh 0173 1] Bit Width : 10
+[0AEh 0174 1] Bit Offset : 00
+[0AFh 0175 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0B0h 0176 8] Address : 0000000000000604
+
+[0B8h 0184 12] PM1B Control Block : [Generic Address Structure]
+[0B8h 0184 1] Space ID : 00 [SystemMemory]
+[0B9h 0185 1] Bit Width : 00
+[0BAh 0186 1] Bit Offset : 00
+[0BBh 0187 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0BCh 0188 8] Address : 0000000000000000
+
+[0C4h 0196 12] PM2 Control Block : [Generic Address Structure]
+[0C4h 0196 1] Space ID : 00 [SystemMemory]
+[0C5h 0197 1] Bit Width : 00
+[0C6h 0198 1] Bit Offset : 00
+[0C7h 0199 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0C8h 0200 8] Address : 0000000000000000
+
+[0D0h 0208 12] PM Timer Block : [Generic Address Structure]
+[0D0h 0208 1] Space ID : 01 [SystemIO]
+[0D1h 0209 1] Bit Width : 20
+[0D2h 0210 1] Bit Offset : 00
+[0D3h 0211 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0D4h 0212 8] Address : 0000000000000608
+
+[0DCh 0220 12] GPE0 Block : [Generic Address Structure]
+[0DCh 0220 1] Space ID : 01 [SystemIO]
+[0DDh 0221 1] Bit Width : 80
+[0DEh 0222 1] Bit Offset : 00
+[0DFh 0223 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0E0h 0224 8] Address : 0000000000000620
+
+[0E8h 0232 12] GPE1 Block : [Generic Address Structure]
+[0E8h 0232 1] Space ID : 00 [SystemMemory]
+[0E9h 0233 1] Bit Width : 00
+[0EAh 0234 1] Bit Offset : 00
+[0EBh 0235 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0ECh 0236 8] Address : 0000000000000000
+
...
APIC:
+/*
+ * Intel ACPI Component Architecture
+ * AML/ASL+ Disassembler version 20200925 (64-bit version)
+ * Copyright (c) 2000 - 2020 Intel Corporation
+ *
+ * Disassembly of /tmp/aml-687791, Wed Aug 23 10:36:32 2023
+ *
+ * ACPI Data Table [APIC]
+ *
+ * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue
+ */
+
+[000h 0000 4] Signature : "APIC" [Multiple APIC Description Table (MADT)]
+[004h 0004 4] Table Length : 00000430
+[008h 0008 1] Revision : 03
+[009h 0009 1] Checksum : C5
+[00Ah 0010 6] Oem ID : "BOCHS "
+[010h 0016 8] Oem Table ID : "BXPC "
+[018h 0024 4] Oem Revision : 00000001
+[01Ch 0028 4] Asl Compiler ID : "BXPC"
+[020h 0032 4] Asl Compiler Revision : 00000001
+
+[024h 0036 4] Local Apic Address : FEE00000
+[028h 0040 4] Flags (decoded below) : 00000001
+ PC-AT Compatibility : 1
+
+[02Ch 0044 1] Subtable Type : 00 [Processor Local APIC]
+[02Dh 0045 1] Length : 08
+[02Eh 0046 1] Processor ID : 00
+[02Fh 0047 1] Local Apic ID : 00
+[030h 0048 4] Flags (decoded below) : 00000001
+ Processor Enabled : 1
+ Runtime Online Capable : 0
+
+[034h 0052 1] Subtable Type : 00 [Processor Local APIC]
+[035h 0053 1] Length : 08
+[036h 0054 1] Processor ID : 01
+[037h 0055 1] Local Apic ID : 01
+[038h 0056 4] Flags (decoded below) : 00000001
+ Processor Enabled : 1
+ Runtime Online Capable : 0
[snip]
+[3E4h 0996 1] Subtable Type : 00 [Processor Local APIC]
+[3E5h 0997 1] Length : 08
+[3E6h 0998 1] Processor ID : 77
+[3E7h 0999 1] Local Apic ID : 9E
+[3E8h 1000 4] Flags (decoded below) : 00000000
+ Processor Enabled : 0
+ Runtime Online Capable : 0
+
+[3ECh 1004 1] Subtable Type : 01 [I/O APIC]
+[3EDh 1005 1] Length : 0C
+[3EEh 1006 1] I/O Apic ID : 00
+[3EFh 1007 1] Reserved : 00
+[3F0h 1008 4] Address : FEC00000
+[3F4h 1012 4] Interrupt : 00000000
+
+[3F8h 1016 1] Subtable Type : 02 [Interrupt Source Override]
+[3F9h 1017 1] Length : 0A
+[3FAh 1018 1] Bus : 00
+[3FBh 1019 1] Source : 00
+[3FCh 1020 4] Interrupt : 00000002
+[400h 1024 2] Flags (decoded below) : 0000
+ Polarity : 0
+ Trigger Mode : 0
+
+[402h 1026 1] Subtable Type : 02 [Interrupt Source Override]
+[403h 1027 1] Length : 0A
+[404h 1028 1] Bus : 00
+[405h 1029 1] Source : 05
+[406h 1030 4] Interrupt : 00000005
+[40Ah 1034 2] Flags (decoded below) : 000D
+ Polarity : 1
+ Trigger Mode : 3
+
+[40Ch 1036 1] Subtable Type : 02 [Interrupt Source Override]
+[40Dh 1037 1] Length : 0A
+[40Eh 1038 1] Bus : 00
+[40Fh 1039 1] Source : 09
+[410h 1040 4] Interrupt : 00000009
+[414h 1044 2] Flags (decoded below) : 000D
+ Polarity : 1
+ Trigger Mode : 3
+
+[416h 1046 1] Subtable Type : 02 [Interrupt Source Override]
+[417h 1047 1] Length : 0A
+[418h 1048 1] Bus : 00
+[419h 1049 1] Source : 0A
+[41Ah 1050 4] Interrupt : 0000000A
+[41Eh 1054 2] Flags (decoded below) : 000D
+ Polarity : 1
+ Trigger Mode : 3
+
+[420h 1056 1] Subtable Type : 02 [Interrupt Source Override]
+[421h 1057 1] Length : 0A
+[422h 1058 1] Bus : 00
+[423h 1059 1] Source : 0B
+[424h 1060 4] Interrupt : 0000000B
+[428h 1064 2] Flags (decoded below) : 000D
+ Polarity : 1
+ Trigger Mode : 3
+
+[42Ah 1066 1] Subtable Type : 04 [Local APIC NMI]
+[42Bh 1067 1] Length : 06
+[42Ch 1068 1] Processor ID : FF
+[42Dh 1069 2] Flags (decoded below) : 0000
+ Polarity : 0
+ Trigger Mode : 0
+[42Fh 1071 1] Interrupt Input LINT : 01
+
...
DSDT:
+/*
+ * Intel ACPI Component Architecture
+ * AML/ASL+ Disassembler version 20200925 (64-bit version)
+ * Copyright (c) 2000 - 2020 Intel Corporation
+ *
+ * Disassembling to symbolic ASL+ operators
+ *
+ * Disassembly of /tmp/aml-8G8791, Wed Aug 23 10:36:32 2023
+ *
+ * Original Table Header:
+ * Signature "DSDT"
+ * Length 0x0000489D (18589)
+ * Revision 0x01 **** 32-bit table (V1), no 64-bit math support
+ * Checksum 0xDB
+ * OEM ID "BOCHS "
+ * OEM Table ID "BXPC "
+ * OEM Revision 0x00000001 (1)
+ * Compiler ID "BXPC"
+ * Compiler Version 0x00000001 (1)
+ */
+DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
+{
+ Scope (\)
+ {
+ OperationRegion (DBG, SystemIO, 0x0402, One)
+ Field (DBG, ByteAcc, NoLock, Preserve)
+ {
+ DBGB, 8
+ }
+
+ Method (DBUG, 1, NotSerialized)
+ {
+ ToHexString (Arg0, Local0)
+ ToBuffer (Local0, Local0)
+ Local1 = (SizeOf (Local0) - One)
+ Local2 = Zero
+ While ((Local2 < Local1))
+ {
+ DBGB = DerefOf (Local0 [Local2])
+ Local2++
+ }
+
+ DBGB = 0x0A
+ }
+ }
+
[snip]
+
+ Processor (C000, 0x00, 0x00000000, 0x00)
+ {
+ Method (_STA, 0, Serialized) // _STA: Status
+ {
+ Return (CSTA (Zero))
+ }
+
+ Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ {
+ 0x00, 0x08, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00 // ........
+ })
+ Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
+ {
+ COST (Zero, Arg0, Arg1, Arg2)
+ }
+ }
+
+ Processor (C001, 0x01, 0x00000000, 0x00)
+ {
+ Method (_STA, 0, Serialized) // _STA: Status
+ {
+ Return (CSTA (One))
+ }
+
+ Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ {
+ 0x00, 0x08, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00 // ........
+ })
+ Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device, x=0-9
+ {
+ CEJ0 (One)
+ }
+
+ Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
+ {
+ COST (One, Arg0, Arg1, Arg2)
+ }
+ }
[snip]
+ Processor (C077, 0x77, 0x00000000, 0x00)
+ {
+ Method (_STA, 0, Serialized) // _STA: Status
+ {
+ Return (CSTA (0x77))
+ }
+
+ Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ {
+ 0x00, 0x08, 0x77, 0x9E, 0x01, 0x00, 0x00, 0x00 // ..w.....
+ })
+ Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device, x=0-9
+ {
+ CEJ0 (0x77)
+ }
+
+ Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
+ {
+ COST (0x77, Arg0, Arg1, Arg2)
+ }
+ }
+ }
+ }
+
...
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231023094635.1588282-5-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
|
Zhao Liu
|
df210963a1 |
tests: bios-tables-test: Add test for smbios type4 count
This tests the commit
|
|
|
Zhao Liu
|
6c7937ece9 |
tests: bios-tables-test: Prepare the ACPI table change for smbios type4 count test
Following the guidelines in tests/qtest/bios-tables-test.c, this is step 1 - 3. List the ACPI tables that will be added to test the type 4 count. Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20231023094635.1588282-3-zhao1.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
|
|
Zhao Liu
|
7d5936791e |
tests: test-smp-parse: Add the test for cores/threads per socket helpers
Use the different ways to calculate cores/threads per socket, so that
the new CPU topology levels won't be missed in these 2 helpes:
* machine_topo_get_cores_per_socket()
* machine_topo_get_threads_per_socket()
Test the commit
|
|
|
Hyman Huang
|
22b7cb2c79 |
tests/migration: Introduce dirty-limit into guestperf
Currently, guestperf does not cover the dirty-limit
migration, support this feature.
Note that dirty-limit requires 'dirty-ring-size' set.
To enable dirty-limit, setting x-vcpu-dirty-limit-period
as 500ms and x-vcpu-dirty-limit as 10MB/s:
$ ./tests/migration/guestperf.py \
--dirty-ring-size 4096 \
--dirty-limit --x-vcpu-dirty-limit-period 500 \
--vcpu-dirty-limit 10 --output output.json \
To run the entire standardized set of dirty-limit-enabled
comparisons, with unix migration:
$ ./tests/migration/guestperf-batch.py \
--dirty-ring-size 4096 \
--dst-host localhost --transport unix \
--filter compr-dirty-limit* --output outputdir
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <516e7a55dfc6e33d33510be37eb24223de5dc072.1697815117.git.yong.huang@smartx.com>
Message-ID: <e1283565b00b34b0377bbd27bee4bb8fc7c255a8.1698847223.git.yong.huang@smartx.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
|
Hyman Huang
|
4cc563d460 |
tests/migration: Introduce dirty-ring-size option into guestperf
Dirty ring size configuration is not supported by guestperf tool. Introduce dirty-ring-size (ranges in [1024, 65536]) option so developers can play with dirty-ring and dirty-limit feature easier. To set dirty ring size with 4096 during migration test: $ ./tests/migration/guestperf.py --dirty-ring-size 4096 xxx Signed-off-by: Hyman Huang <yong.huang@smartx.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-ID: <8a388cec5c1f73a34d42515bbc43837e97ee3839.1698847223.git.yong.huang@smartx.com> |
|
|
Hyman Huang
|
17257b90be |
tests: Add migration dirty-limit capability test
Add migration dirty-limit capability test if kernel support dirty ring. Migration dirty-limit capability introduce dirty limit capability, two parameters: x-vcpu-dirty-limit-period and vcpu-dirty-limit are introduced to implement the live migration with dirty limit. The test case does the following things: 1. start src, dst vm and enable dirty-limit capability 2. start migrate and set cancel it to check if dirty limit stop working. 3. restart dst vm 4. start migrate and enable dirty-limit capability 5. check if migration satisfy the convergence condition during pre-switchover phase. Note that this test case involves many passes, so it runs in slow mode only. Signed-off-by: Hyman Huang <yong.huang@smartx.com> Acked-by: Peter Xu <peterx@redhat.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-ID: <e55a302df9da7dbc00ad825f47f57c1a756d303e.1698847223.git.yong.huang@smartx.com> |
|
|
Stefan Hajnoczi
|
d762bf9793 |
target-arm queue:
* linux-user/elfload: Add missing arm64 hwcap values * stellaris-gamepad: Convert to qdev * docs/specs: Convert various txt docs to rST * MAINTAINERS: Make sure that gicv3_internal.h is covered, too * hw/arm/pxa2xx_gpio: Pass CPU using QOM link property * hw/watchdog/wdt_imx2: Trace MMIO access and timer activity * hw/misc/imx7_snvs: Trace MMIO access * hw/misc/imx6_ccm: Convert DPRINTF to trace events * hw/i2c/pm_smbus: Convert DPRINTF to trace events * target/arm: Enable FEAT_MOPS insns in user-mode emulation * linux-user: Report AArch64 hwcap2 fields above bit 31 * target/arm: Make FEAT_MOPS SET* insns handle Xs == XZR correctly * target/arm: Fix SVE STR increment * hw/char/stm32f2xx_usart: implement TX interrupts * target/arm: Correctly propagate stage 1 BTI guarded bit in a two-stage walk * xlnx-versal-virt: Add AMD/Xilinx TRNG device -----BEGIN PGP SIGNATURE----- iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmVD3hEZHHBldGVyLm1h eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3kuRD/4mLL2DB+yvQJrzSvUlrjfi /orPDrY9xEQ7ln2YpNqc2BZ4wAgh947yk/ae5+lyACQcBhCPiwMyVK1bBscNxkgA 8YPmuugNem/64+IHiKkz6aroqjvC83dUzJ9R5O9ctV70mgrX32YnhXNkkYVI81Ar bEwBznyYeCiy8ZafVxc2m70fiBOlurb6htYYdt7VHsgB0ozK/80UmuFI6exOKt1r oVyYouMaidNV/AoqZBGSKT2UFvFmI57PWN0YQD8CMECLsB/mBE9TEzSvLRdlOB4G qI5hgEJks61qDL6+YMJ+hskxW+D3g3I1WjuyqhKfiAzcKmmTAp1NsiiDtva8yBzX lDUXc6bPomalrKo1SPsooJv9r4uE3hCayDOlR+qM38DL4j2soSd3QIP7dCzERbZx snrD+ZTtgXtomUN8ojbnOK+kClEfURZ+wALbUEXwAh1sBwrKBxaD4ss4lA2esq10 HJPjBJzAWoSmK2DY6GWt2xIa+GvQwdPnxMpHbp3yAddGP7i/lHM0x60q5YpjHV++ DHaZmLBA7L9wcvT1VrwmieJaB+ADcSfkzBz2KznC4usdEY8BiJhjdRAzkqdGZWV5 HKEg8QwMYHg4QRUoZxW/XdtVzdqcjO5pTSUr3HUE+85sum2e9Yee6rybg1W/EWYv 7SnVkD5zG1BU268/p5k6UA== =OgfH -----END PGP SIGNATURE----- Merge tag 'pull-target-arm-20231102' of https://git.linaro.org/people/pmaydell/qemu-arm into staging target-arm queue: * linux-user/elfload: Add missing arm64 hwcap values * stellaris-gamepad: Convert to qdev * docs/specs: Convert various txt docs to rST * MAINTAINERS: Make sure that gicv3_internal.h is covered, too * hw/arm/pxa2xx_gpio: Pass CPU using QOM link property * hw/watchdog/wdt_imx2: Trace MMIO access and timer activity * hw/misc/imx7_snvs: Trace MMIO access * hw/misc/imx6_ccm: Convert DPRINTF to trace events * hw/i2c/pm_smbus: Convert DPRINTF to trace events * target/arm: Enable FEAT_MOPS insns in user-mode emulation * linux-user: Report AArch64 hwcap2 fields above bit 31 * target/arm: Make FEAT_MOPS SET* insns handle Xs == XZR correctly * target/arm: Fix SVE STR increment * hw/char/stm32f2xx_usart: implement TX interrupts * target/arm: Correctly propagate stage 1 BTI guarded bit in a two-stage walk * xlnx-versal-virt: Add AMD/Xilinx TRNG device * tag 'pull-target-arm-20231102' of https://git.linaro.org/people/pmaydell/qemu-arm: (33 commits) tests/qtest: Introduce tests for AMD/Xilinx Versal TRNG device hw/arm: xlnx-versal-virt: Add AMD/Xilinx TRNG device hw/misc: Introduce AMD/Xilix Versal TRNG device target/arm: Correctly propagate stage 1 BTI guarded bit in a two-stage walk hw/char/stm32f2xx_usart: Add more definitions for CR1 register hw/char/stm32f2xx_usart: Update IRQ when DR is written hw/char/stm32f2xx_usart: Extract common IRQ update code to update_irq() target/arm: Fix SVE STR increment target/arm: Make FEAT_MOPS SET* insns handle Xs == XZR correctly linux-user: Report AArch64 hwcap2 fields above bit 31 target/arm: Enable FEAT_MOPS insns in user-mode emulation hw/i2c/pm_smbus: Convert DPRINTF to trace events hw/misc/imx6_ccm: Convert DPRINTF to trace events hw/misc/imx7_snvs: Trace MMIO access hw/watchdog/wdt_imx2: Trace timer activity hw/watchdog/wdt_imx2: Trace MMIO access hw/arm/pxa2xx_gpio: Pass CPU using QOM link property MAINTAINERS: Make sure that gicv3_internal.h is covered, too docs/specs/vmgenid: Convert to rST docs/specs/vmcoreinfo: Convert to rST ... Conflicts: hw/input/stellaris_input.c The qdev conversion in this pull request ("stellaris-gamepad: Convert to qdev") eliminates the vmstate_register() call that was converted to vmstate_register_any() in the conflicting migration pull request. vmstate_register_any() is no longer necessary now that this device has been converted to qdev, so take this pull request's version of stellaris_gamepad.c over the previous pull request's stellaris_input.c (the file was renamed). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> |
|
|
Stefan Hajnoczi
|
75b7b25d44 |
Migration Pull request (20231102)
Hi
In this pull request:
- migration reboot mode (steve)
* I disabled the test because our CI don't like programs using so
much shared memory. Searching for a fix.
- test for postcopy recover (fabiano)
- MigrateAddress QAPI (het)
- better return path error handling (peter)
- traces for downtime (peter)
- vmstate_register() check for duplicates (juan)
thomas find better solutions for s390x and ipmi.
now also works on s390x
Please, apply.
-----BEGIN PGP SIGNATURE-----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=uaqL
-----END PGP SIGNATURE-----
Merge tag 'migration-20231102-pull-request' of https://gitlab.com/juan.quintela/qemu into staging
Migration Pull request (20231102)
Hi
In this pull request:
- migration reboot mode (steve)
* I disabled the test because our CI don't like programs using so
much shared memory. Searching for a fix.
- test for postcopy recover (fabiano)
- MigrateAddress QAPI (het)
- better return path error handling (peter)
- traces for downtime (peter)
- vmstate_register() check for duplicates (juan)
thomas find better solutions for s390x and ipmi.
now also works on s390x
Please, apply.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmVDipMACgkQ9IfvGFhy
# 1yNYnQ/9E5Cywsoqljqa/9FiKBSII2qMrmkfu6JLKqePnsh5pFZiukbudYRuJCCe
# ZTDEmD0NmKRJbDx2xRU1qx/e6gKJy+gz37KP89Buuh/WwZHPboPYtxQpGvCSiH26
# J3i+1+TgaqmkLzcO35wa8tp6gneQclWeAwKgMvdb4cm2pJEhgWRKI62ccyLzxeve
# UCzFQn60t55ETyVZGnRD4YwdTQvGKH+DPlyTuJOLR3DePuvZd8EdH+ypvB4RLAy7
# 3+CuQOxmF5LRXPbpJuAeOsudbmhhHzrO/yL7ZmsiKQTthsJv+SzC1bO94jhQrawZ
# Q7GCii5KpGq0KnRTRKZRGk6XKwxcYRduXMX3R5tXuVmDmCZsjhXzziU8yEdftph8
# 5TJdk1o0Gb043EFu81mrsQYS+9yJqe6sy6m3PTJaec54cAty5ln+c17WOvpAOaSV
# +1phe05ftuVPmQ3KWhbIR/tCmavNLwEZxpVIfyaKJx04bFbtQ9gRpRyURORX4KXc
# s4WXvNirQEohxYBnP4TPvA09xBTW3V08pk/wRDwt0YDXnLiqCltOuxD8r05K8K4B
# MkCLcWj0g7he2tBkF60oz1KSIE0oTB81um9AzLIv5F2YSYLaJM5BIcoC437MR2f4
# MOR7drR1fP5GsRu/SeU5BWvhVq3IvdOxR7G2MLNRJJvl7ZtGXDc=
# =uaqL
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 02 Nov 2023 19:40:03 HKT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* tag 'migration-20231102-pull-request' of https://gitlab.com/juan.quintela/qemu: (40 commits)
migration: modify test_multifd_tcp_none() to use new QAPI syntax.
migration: Implement MigrateChannelList to hmp migration flow.
migration: Implement MigrateChannelList to qmp migration flow.
migration: modify migration_channels_and_uri_compatible() for new QAPI syntax
migration: New migrate and migrate-incoming argument 'channels'
migration: Convert the file backend to the new QAPI syntax
migration: convert exec backend to accept MigrateAddress.
migration: convert rdma backend to accept MigrateAddress
migration: convert socket backend to accept MigrateAddress
migration: convert migration 'uri' into 'MigrateAddress'
migration: New QAPI type 'MigrateAddress'
migration: Change ram_dirty_bitmap_reload() retval to bool
tests/migration-test: Add a test for postcopy hangs during RECOVER
migration: Allow network to fail even during recovery
migration: Refactor error handling in source return path
tests/qtest: migration: add reboot mode test
cpr: reboot mode
cpr: relax vhost migration blockers
cpr: relax blockdev migration blockers
migration: per-mode blockers
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
|
Tong Ho
|
1c98a821a2 |
tests/qtest: Introduce tests for AMD/Xilinx Versal TRNG device
Signed-off-by: Tong Ho <tong.ho@amd.com> Message-id: 20231031184611.3029156-4-tong.ho@amd.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> |
|
|
Richard Henderson
|
b11293c212 |
target/arm: Fix SVE STR increment
The previous change missed updating one of the increments and
one of the MemOps. Add a test case for all vector lengths.
Cc: qemu-stable@nongnu.org
Fixes:
|
|
|
Het Gala
|
8e3766eefb |
migration: modify test_multifd_tcp_none() to use new QAPI syntax.
modify multifd tcp common test to incorporate the new QAPI syntax defined. Suggested-by: Aravind Retnakaran <aravind.retnakaran@nutanix.com> Signed-off-by: Het Gala <het.gala@nutanix.com> Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-ID: <20231023182053.8711-15-farosas@suse.de> |
|
|
Fabiano Rosas
|
7bca2bb7bf |
tests/migration-test: Add a test for postcopy hangs during RECOVER
To do so, create two paired sockets, but make them not providing real data. Feed those fake sockets to src/dst QEMUs for recovery to let them go into RECOVER stage without going out. Test that we can always kick it out and recover again with the right ports. This patch is based on Fabiano's version here: https://lore.kernel.org/r/877cowmdu0.fsf@suse.de Signed-off-by: Fabiano Rosas <farosas@suse.de> [peterx: write commit message, remove case 1, fix bugs, and more] Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-ID: <20231017202633.296756-4-peterx@redhat.com> |
|
|
Steve Sistare
|
e7b428d6bc |
tests/qtest: migration: add reboot mode test
[ Maintainer note: I put the test as flaky because our CI has problems with shared memory. We will remove the flaky bits as soon as we get a solution. ] Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-ID: <1698263069-406971-7-git-send-email-steven.sistare@oracle.com> |
|
|
Thomas Huth
|
a35c20961b |
tests/avocado/machine_m68k_nextcube: Fix the download URL for the ROM image
If Avocado has to fetch this asset, the download fails with a 403 HTTP error. Use a different URL to fix the issue. Message-ID: <20231101201934.27637-1-huth@tuxfamily.org> Signed-off-by: Thomas Huth <huth@tuxfamily.org> |
|
|
Stefan Hajnoczi
|
6c9ae1ce82 |
Block layer patches
- virtio-blk: use blk_io_plug_call() instead of notification BH - mirror: allow switching from background to active mode - qemu-img rebase: add compression support - Fix locking in media change monitor commands - Fix a few blockjob-related deadlocks when using iothread -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmVBTkERHGt3b2xmQHJl ZGhhdC5jb20ACgkQfwmycsiPL9ZiqRAAqvsWbblmEGJ7TBKYQK3f8QshJ66RxzbC 4eSjKHrciWNTeeIeU8r8OvFcPPoTcPXxpcmasD2gsAxG5W5N8vkPbBkW+YT4YdDJ pWJXrbJ15nILC4DmnR1ARVtvxKgv9zy5LSm5bjss1K+OSYJl/nx+ILjmfVZnYDF7 z1dP/G0JxKKm4JzAIdBE3uZS+6Q5kx/wGYlJv8EQmlH3DYfsJfy6Lthe9jfw8ijg lSqLoQ+D0lEd6Bk4XbkUqqBxFcYBWTfU6qPZoyIO94zCTwTG9yIjmoivxmmfwQZq cJUTGGZjcxpJYnvcC6P13WgcWBtcD9L2kYFVH0JyjpwcSg9cCGHMF66n9pSlyEGq DUikwVzbTwOotwzYQyM88v4ET+2+Qdcwn8pRbv9PllEczh0kAsUAEuxSgtz4NEcN bZrap/16xHFybNOKkMZcmpqxspT5NXKbDODUP0IvbSYMOYpWS983nBTxwMRpyHog 2TFDZu4DjNiPkI2BcYM5VOKk6diNowZFShcEKvoaOLX/n9EBhP0tjoH9VUn1800F myHrhF2jpIf9GhErMWB7N2W3/0aK0pqdQgbpVnd1ARDdIdYkr7G/S+50D9K80b6n 0q2E7br4S5bcsY0HQzBL9YARSayY+lVOssLoolCWEsYzijdBQmAvs5THajFKcism /idI6nlp2Vs= =RdxS -----END PGP SIGNATURE----- Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging Block layer patches - virtio-blk: use blk_io_plug_call() instead of notification BH - mirror: allow switching from background to active mode - qemu-img rebase: add compression support - Fix locking in media change monitor commands - Fix a few blockjob-related deadlocks when using iothread # -----BEGIN PGP SIGNATURE----- # # iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmVBTkERHGt3b2xmQHJl # ZGhhdC5jb20ACgkQfwmycsiPL9ZiqRAAqvsWbblmEGJ7TBKYQK3f8QshJ66RxzbC # 4eSjKHrciWNTeeIeU8r8OvFcPPoTcPXxpcmasD2gsAxG5W5N8vkPbBkW+YT4YdDJ # pWJXrbJ15nILC4DmnR1ARVtvxKgv9zy5LSm5bjss1K+OSYJl/nx+ILjmfVZnYDF7 # z1dP/G0JxKKm4JzAIdBE3uZS+6Q5kx/wGYlJv8EQmlH3DYfsJfy6Lthe9jfw8ijg # lSqLoQ+D0lEd6Bk4XbkUqqBxFcYBWTfU6qPZoyIO94zCTwTG9yIjmoivxmmfwQZq # cJUTGGZjcxpJYnvcC6P13WgcWBtcD9L2kYFVH0JyjpwcSg9cCGHMF66n9pSlyEGq # DUikwVzbTwOotwzYQyM88v4ET+2+Qdcwn8pRbv9PllEczh0kAsUAEuxSgtz4NEcN # bZrap/16xHFybNOKkMZcmpqxspT5NXKbDODUP0IvbSYMOYpWS983nBTxwMRpyHog # 2TFDZu4DjNiPkI2BcYM5VOKk6diNowZFShcEKvoaOLX/n9EBhP0tjoH9VUn1800F # myHrhF2jpIf9GhErMWB7N2W3/0aK0pqdQgbpVnd1ARDdIdYkr7G/S+50D9K80b6n # 0q2E7br4S5bcsY0HQzBL9YARSayY+lVOssLoolCWEsYzijdBQmAvs5THajFKcism # /idI6nlp2Vs= # =RdxS # -----END PGP SIGNATURE----- # gpg: Signature made Wed 01 Nov 2023 03:58:09 JST # gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6 # gpg: issuer "kwolf@redhat.com" # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (27 commits) iotests: add test for changing mirror's copy_mode mirror: return mirror-specific information upon query blockjob: query driver-specific info via a new 'query' driver method qapi/block-core: turn BlockJobInfo into a union qapi/block-core: use JobType for BlockJobInfo's type mirror: implement mirror_change method block/mirror: determine copy_to_target only once block/mirror: move dirty bitmap to filter block/mirror: set actively_synced even after the job is ready blockjob: introduce block-job-change QMP command virtio-blk: remove batch notification BH virtio: use defer_call() in virtio_irqfd_notify() util/defer-call: move defer_call() to util/ block: rename blk_io_plug_call() API to defer_call() blockdev: mirror: avoid potential deadlock when using iothread block: avoid potential deadlock during bdrv_graph_wrlock() in bdrv_close() blockjob: drop AioContext lock before calling bdrv_graph_wrlock() iotests: Test media change with iothreads block: Fix locking in media change monitor commands iotests: add tests for "qemu-img rebase" with compression ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> |
|
|
Stefan Hajnoczi
|
997ef293d2 |
Maintainer updates for testing, gitlab, gdbstub and plugins:
- add dtc package to openbsd VMs - use -fno-stack-protector for non-stdlib tests - split alpha and sh4 compilers into legacy image - harmonise other compilers into debian-all-test-cross - fix NULL check in gdb_regs - fix memleak in semihosting - remove unused parameter in plugin code - fix fd leak in lockstep plugin -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmVBCvQACgkQ+9DbCVqe KkR8jAgAjFC3BE6fu80zYT0Dmeu8zh20QY/wgKQebaFfGEmPL4Bqkl2D/Rx7PhQA EH8fR/LAH/iXAO07+LYOB6QiyMb9PWiXS52iHyE3q11mOaM8iKkkj7a59NW8DfGC biSrj9o3wpz9gGkJjzTCcHC8DOMbrAuE12XnmhW7uTqqkrcTMC393dSEeyL+nrP9 lKS5XzFyn3FOT4YIL8hAC02ObKH4LpWIO3gdWeDAo56yg24fLir9a2wYSXMaxQtN kDf6UtL97CIIhbNi6qrUPBB13MV8MlXno3wnb9+E4Cn5sGntGSnTyh7j6XrGqYj9 p/Vio6ye8xP1IjlavKiBM0nnozcAhw== =ZOMS -----END PGP SIGNATURE----- Merge tag 'pull-halloween-omnibus-311023-2' of https://gitlab.com/stsquad/qemu into staging Maintainer updates for testing, gitlab, gdbstub and plugins: - add dtc package to openbsd VMs - use -fno-stack-protector for non-stdlib tests - split alpha and sh4 compilers into legacy image - harmonise other compilers into debian-all-test-cross - fix NULL check in gdb_regs - fix memleak in semihosting - remove unused parameter in plugin code - fix fd leak in lockstep plugin # -----BEGIN PGP SIGNATURE----- # # iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmVBCvQACgkQ+9DbCVqe # KkR8jAgAjFC3BE6fu80zYT0Dmeu8zh20QY/wgKQebaFfGEmPL4Bqkl2D/Rx7PhQA # EH8fR/LAH/iXAO07+LYOB6QiyMb9PWiXS52iHyE3q11mOaM8iKkkj7a59NW8DfGC # biSrj9o3wpz9gGkJjzTCcHC8DOMbrAuE12XnmhW7uTqqkrcTMC393dSEeyL+nrP9 # lKS5XzFyn3FOT4YIL8hAC02ObKH4LpWIO3gdWeDAo56yg24fLir9a2wYSXMaxQtN # kDf6UtL97CIIhbNi6qrUPBB13MV8MlXno3wnb9+E4Cn5sGntGSnTyh7j6XrGqYj9 # p/Vio6ye8xP1IjlavKiBM0nnozcAhw== # =ZOMS # -----END PGP SIGNATURE----- # gpg: Signature made Tue 31 Oct 2023 23:11:00 JST # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * tag 'pull-halloween-omnibus-311023-2' of https://gitlab.com/stsquad/qemu: contrib/plugins: Close file descriptor on error return plugins: Remove an extra parameter semihosting: fix memleak at semihosting_arg_fallback gdbstub: Check if gdb_regs is NULL tests/docker: upgrade debian-all-test-cross to bookworm tests/docker: use debian-all-test-cross for sparc64 tests/docker: use debian-all-test-cross for riscv64 tests/docker: use debian-all-test-cross for mips tests/docker: use debian-all-test-cross for mips64 tests/docker: use debian-all-test-cross for m68k tests/docker: use debian-all-test-cross for hppa tests/docker: use debian-all-test-cross for power tests/docker: move sh4 to use debian-legacy-test-cross tests/docker: use debian-legacy-test-cross for alpha gitlab: add build-loongarch to matrix gitlab: clean-up build-soft-softmmu job gitlab: split alpha testing into a legacy container tests/tcg: Add -fno-stack-protector tests/vm/openbsd: Use the system dtc package Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> |
|
|
Stefan Hajnoczi
|
f13b978cc7 |
Migration Pull request (20231031)
Hi This is repeat of the Migration PULL for 20231020. - I removed vmstate_register(big problems with s390x) - I added yet more countes (juan) CI: https://gitlab.com/juan.quintela/qemu/-/pipelines/1055797950 Please apply. Thanks, Juan. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmVAwmYACgkQ9IfvGFhy 1yPJ9g//f8Up+5Az0DmJMWwRe+08vLa3ZRCSh5aCRJguFVfMZSVxRNuoikQ/C/Gz 1ePB+Q8H0NcP86FF7pifhtLU0uE9L4At4Z+vOQP1+n67p7aush050kKQxyDYIfO2 3tO2HkfHvC/R3S5FtqQtE1Y0/MpHdj1vgV9bNidPorA6EZ01KEEfWw3soptuD14I LPvXA8BG5mOvB7R55MymTAej3ZDmOUQlZotsE2KmlkOfzYoqTtApkLtW03/WH8b8 fAYJ0ghYpesRTO1rF61n1peLMUr+/HRLqGJmhLDSEZZlB5tnUYeiLR9dRJ1/1+o2 zNjLr6X2hnia6Kb0UibRoAcyyy8lSLp79Zt5nhDneuTSQxeYhNh6EecxAzKvd/02 vfE/reOEkZn7KzYH/MvlD5P6XmwrT5aV9cqmyC/8BkNnipHAtJ2Av1H4ONdnahuK hOhLRAGE7SINtgo8jdauQNor1QAsIX19nvYk9p7ta5VAysrDSbuD+9Yq7HtUErlP 585z5BPGfaP2GwIXPNJNcqXwPh0InInGASqEWmYSlu8GF3Ic0KNWWrC5bwSn7tHL I7qaMrCHxvWGYx6cRzzp08EqCcbOQCixrPyk8g6o3SgXHrTGKthzjPG5bLe+QXpv P2gblC7Fo3sUo89IwVjsRMO3nU9wBfb9skE7iZM06SILO7QD3u8= =r1DI -----END PGP SIGNATURE----- Merge tag 'migration-20231031-pull-request' of https://gitlab.com/juan.quintela/qemu into staging Migration Pull request (20231031) Hi This is repeat of the Migration PULL for 20231020. - I removed vmstate_register(big problems with s390x) - I added yet more countes (juan) CI: https://gitlab.com/juan.quintela/qemu/-/pipelines/1055797950 Please apply. Thanks, Juan. # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmVAwmYACgkQ9IfvGFhy # 1yPJ9g//f8Up+5Az0DmJMWwRe+08vLa3ZRCSh5aCRJguFVfMZSVxRNuoikQ/C/Gz # 1ePB+Q8H0NcP86FF7pifhtLU0uE9L4At4Z+vOQP1+n67p7aush050kKQxyDYIfO2 # 3tO2HkfHvC/R3S5FtqQtE1Y0/MpHdj1vgV9bNidPorA6EZ01KEEfWw3soptuD14I # LPvXA8BG5mOvB7R55MymTAej3ZDmOUQlZotsE2KmlkOfzYoqTtApkLtW03/WH8b8 # fAYJ0ghYpesRTO1rF61n1peLMUr+/HRLqGJmhLDSEZZlB5tnUYeiLR9dRJ1/1+o2 # zNjLr6X2hnia6Kb0UibRoAcyyy8lSLp79Zt5nhDneuTSQxeYhNh6EecxAzKvd/02 # vfE/reOEkZn7KzYH/MvlD5P6XmwrT5aV9cqmyC/8BkNnipHAtJ2Av1H4ONdnahuK # hOhLRAGE7SINtgo8jdauQNor1QAsIX19nvYk9p7ta5VAysrDSbuD+9Yq7HtUErlP # 585z5BPGfaP2GwIXPNJNcqXwPh0InInGASqEWmYSlu8GF3Ic0KNWWrC5bwSn7tHL # I7qaMrCHxvWGYx6cRzzp08EqCcbOQCixrPyk8g6o3SgXHrTGKthzjPG5bLe+QXpv # P2gblC7Fo3sUo89IwVjsRMO3nU9wBfb9skE7iZM06SILO7QD3u8= # =r1DI # -----END PGP SIGNATURE----- # gpg: Signature made Tue 31 Oct 2023 18:01:26 JST # gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723 # gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full] # gpg: aka "Juan Quintela <quintela@trasno.org>" [full] # Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723 * tag 'migration-20231031-pull-request' of https://gitlab.com/juan.quintela/qemu: (38 commits) qemu-file: Make qemu_fflush() return errors migration: Remove transferred atomic counter migration: Use migration_transferred_bytes() qemu-file: Simplify qemu_file_get_error() migration: migration_rate_limit_reset() don't need the QEMUFile migration: migration_transferred_bytes() don't need the QEMUFile qemu-file: Remove _noflush from qemu_file_transferred_noflush() qemu_file: Remove unused qemu_file_transferred() migration: Use the number of transferred bytes directly qemu_file: total_transferred is not used anymore qemu_file: Use a stat64 for qemu_file_transferred qemu-file: Don't increment qemu_file_transferred at qemu_file_fill_buffer migration: Stop migration immediately in RDMA error paths migration: Deprecate old compression method migration: Deprecate block migration migration: migrate 'blk' command option is deprecated. migration: migrate 'inc' command option is deprecated. qemu-iotests: Filter warnings about block migration being deprecated migration: set file error on subsection loading migration: rename vmstate_save_needed->vmstate_section_needed ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> |
|
|
Fiona Ebner
|
900e7d413d |
iotests: add test for changing mirror's copy_mode
One part of the test is using a throttled source to ensure that there are no obvious issues when changing the copy_mode while there are ongoing requests (source and target images are compared at the very end). The other part of the test is using a throttled target to ensure that the change to active mode actually happened. This is done by hitting the throttling limit, issuing a synchronous write and then immediately verifying the target side. QSD is used, because otherwise, a synchronous write would hang there. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com> Message-ID: <20231031135431.393137-11-f.ebner@proxmox.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> |
|
|
Fiona Ebner
|
76cb2f2491 |
mirror: return mirror-specific information upon query
To start out, only actively-synced is returned. For example, this is useful for jobs that started out in background mode and switched to active mode. Once actively-synced is true, it's clear that the mode switch has been completed. Note that completion of the switch might happen much earlier, e.g. if the switch happens before the job is ready, once all background operations have finished. It's assumed that whether the disks are actively-synced or not is more interesting than whether the mode switch completed. That information can still be added if required in the future. In presence of an iothread, the actively_synced member is now shared between the iothread and the main thread, so turn accesses to it atomic. Requires to adapt the output for iotest 109. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com> Message-ID: <20231031135431.393137-10-f.ebner@proxmox.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> |
|
|
Alex Bennée
|
aba77ac5db |
tests/docker: upgrade debian-all-test-cross to bookworm
This requires a few more tweaks than usual as: - the default sources format has changed - bring in python3-tomli from the repos - split base install from cross compilers - also include libclang-rt-dev for sanitiser builds Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20231029145033.592566-16-alex.bennee@linaro.org> |
|
|
Alex Bennée
|
7ccb4153fe |
tests/docker: use debian-all-test-cross for sparc64
Maintaining two sets of containers for test building is silly. While it makes sense for the QEMU cross-compile targets to have their own fat containers built by lcitool we might as well merge the other random debian based compilers into the same one used on gitlab. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20231029145033.592566-15-alex.bennee@linaro.org> |
|
|
Alex Bennée
|
26025d8e36 |
tests/docker: use debian-all-test-cross for riscv64
Maintaining two sets of containers for test building is silly. While it makes sense for the QEMU cross-compile targets to have their own fat containers built by lcitool we might as well merge the other random debian based compilers into the same one used on gitlab. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20231029145033.592566-14-alex.bennee@linaro.org> |
|
|
Alex Bennée
|
b09bb6d1b8 |
tests/docker: use debian-all-test-cross for mips
Maintaining two sets of containers for test building is silly. While it makes sense for the QEMU cross-compile targets to have their own fat containers built by lcitool we might as well merge the other random debian based compilers into the same one used on gitlab. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20231029145033.592566-13-alex.bennee@linaro.org> |
|
|
Alex Bennée
|
92a3165e1a |
tests/docker: use debian-all-test-cross for mips64
Maintaining two sets of containers for test building is silly. While it makes sense for the QEMU cross-compile targets to have their own fat containers built by lcitool we might as well merge the other random debian based compilers into the same one used on gitlab. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20231029145033.592566-12-alex.bennee@linaro.org> |
|
|
Alex Bennée
|
9d9a573612 |
tests/docker: use debian-all-test-cross for m68k
Maintaining two sets of containers for test building is silly. While it makes sense for the QEMU cross-compile targets to have their own fat containers built by lcitool we might as well merge the other random debian based compilers into the same one used on gitlab. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20231029145033.592566-11-alex.bennee@linaro.org> |
|
|
Alex Bennée
|
95f5bf9521 |
tests/docker: use debian-all-test-cross for hppa
Maintaining two sets of containers for test building is silly. While it makes sense for the QEMU cross-compile targets to have their own fat containers built by lcitool we might as well merge the other random debian based compilers into the same one used on gitlab. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20231029145033.592566-10-alex.bennee@linaro.org> |
|
|
Alex Bennée
|
eb4cb4ed1f |
tests/docker: use debian-all-test-cross for power
Maintaining two sets of containers for test building is silly. While it makes sense for the QEMU cross-compile targets to have their own fat containers built by lcitool we might as well merge the other random debian based compilers into the same one used on gitlab. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20231029145033.592566-9-alex.bennee@linaro.org> |
|
|
Alex Bennée
|
4e76d98ae9 |
tests/docker: move sh4 to use debian-legacy-test-cross
sh4 is another target which doesn't work with bookworm compilers. To keep on buster move across to the debian-legacy-test-cross image and update accordingly. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20231030135715.800164-1-alex.bennee@linaro.org> |
|
|
Alex Bennée
|
d004e27b4e |
tests/docker: use debian-legacy-test-cross for alpha
Maintaining two sets of containers for test building is silly. While it makes sense for the QEMU cross-compile targets to have their own fat containers built by lcitool we might as well merge the other random debian based compilers into the same one used on gitlab. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20231029145033.592566-7-alex.bennee@linaro.org> |
|
|
Alex Bennée
|
cb8715bf0c |
gitlab: add build-loongarch to matrix
We have the compiler and with a few updates a container that can build QEMU so we should at least run the check-tcg smoke tests. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20231029145033.592566-6-alex.bennee@linaro.org> |
|
|
Alex Bennée
|
aa39c4c098 |
gitlab: split alpha testing into a legacy container
The current bookworm compiler doesn't build the static binaries due to bug #1054412 and it might be awhile before it gets fixed. The problem of keeping older architecture compilers running isn't going to go away so lets prepare the ground. Create a legacy container and move some tests around so the others can get upgraded. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20231029145033.592566-4-alex.bennee@linaro.org> |
|
|
Akihiko Odaki
|
580731dcc8 |
tests/tcg: Add -fno-stack-protector
A build of GCC 13.2 will have stack protector enabled by default if it was configured with --enable-default-ssp option. For such a compiler, it is necessary to explicitly disable stack protector when linking without standard libraries. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-Id: <20230731091042.139159-3-akihiko.odaki@daynix.com> [AJB: fix comment string typo] Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20231029145033.592566-3-alex.bennee@linaro.org> |
|
|
Thomas Huth
|
05c223cef7 |
tests/vm/openbsd: Use the system dtc package
We can use the pre-packaged libfdt from the dtc package to avoid that we have to compile this code each time again and again. While we're at it, the "--python=python3" does not seemt to be necessary anymore, so we can drop it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20231016154049.37147-1-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20231029145033.592566-2-alex.bennee@linaro.org> |
|
|
Kevin Wolf
|
3be5762294 |
iotests: Test media change with iothreads
iotests case 118 already tests all relevant operations for media change with multiple devices, however never with iothreads. This changes the test so that the virtio-scsi tests run with an iothread. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20231013153302.39234-3-kwolf@redhat.com> Reviewed-by: Hanna Czenczek <hreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> |
|
|
Andrey Drobyshev
|
87fe52ceca |
iotests: add tests for "qemu-img rebase" with compression
The test cases considered so far: 314 (new test suite): 1. Check that compression mode isn't compatible with "-f raw" (raw format doesn't support compression). 2. Check that rebasing an image onto no backing file preserves the data and writes the copied clusters actually compressed. 3. Same as 2, but with a raw backing file (i.e. the clusters copied from the backing are originally uncompressed -- we check they end up compressed after being merged). 4. Remove a single delta from a backing chain, perform the same checks as in 2. 5. Check that even when backing and overlay are initially uncompressed, copied clusters end up compressed when rebase with compression is performed. 271: 1. Check that when target image has subclusters, rebase with compression will make an entire cluster containing the written subcluster compressed. Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com> Reviewed-by: Hanna Czenczek <hreitz@redhat.com> Message-ID: <20230919165804.439110-9-andrey.drobyshev@virtuozzo.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> |
|
|
Andrey Drobyshev
|
f93e65ee51 |
iotests/{024, 271}: add testcases for qemu-img rebase
As the previous commit changes the logic of "qemu-img rebase" (it's using
write alignment now), let's add a couple more test cases which would
ensure it works correctly. In particular, the following scenarios:
024: add test case for rebase within one backing chain when the overlay
cluster size > backings cluster size;
271: add test case for rebase images that contain subclusters. Check
that no extra allocations are being made.
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-ID: <20230919165804.439110-7-andrey.drobyshev@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
|
Andrey Drobyshev
|
827171c318 |
qemu-iotests: 024: add rebasing test case for overlay_size > backing_size
Before previous commit, rebase was getting infitely stuck in case of rebasing within the same backing chain and when overlay_size > backing_size. Let's add this case to the rebasing test 024 to make sure it doesn't break again. Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Hanna Czenczek <hreitz@redhat.com> Message-ID: <20230919165804.439110-3-andrey.drobyshev@virtuozzo.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> |