The low bit of MMU indices for x86 TCG indicates whether the processor is
in 32-bit mode and therefore linear addresses have to be masked to 32 bits.
However, the index was computed incorrectly, leading to possible conflicts
in the TLB for any address above 4G.
Analyzed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: b1661801c1 ("target/i386: Fix physical address truncation", 2024-02-28)
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2206
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- mirror: Fix deadlock
- nbd/server: Fix race in draining the export
- qemu-img snapshot: Fix formatting with large values
- Fix blockdev-snapshot-sync error reporting for no medium
- iotests fixes
-----BEGIN PGP SIGNATURE-----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=+JIK
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches
- mirror: Fix deadlock
- nbd/server: Fix race in draining the export
- qemu-img snapshot: Fix formatting with large values
- Fix blockdev-snapshot-sync error reporting for no medium
- iotests fixes
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmX4OG8RHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9YdiQ//faXfGmbK6rBW4AkpwfrRM8SDHvm6hz7L
# 043ujAi3ziSXXoiec2/RK5wZ27nMJkfIrRHXpH41hgQvC6/3a4eIW6KSTaFV1PdG
# JtHCeopmVmgu7TZQ+kt/J6eLUTTLovoO94HgEfmxpr4CGZfx9RJftf2kCKILcYkh
# 9r04zSZLByVd4FJ5ZrqsFulWif5mXoGKdT/YisY3tKiCwFRWQDOoTymvJA012VtO
# MVmID593zwem3O3qtlGiGlK9qodBR4yof66xa/0gaYP98BZgv+LWnwLKha+OzSpX
# bQlxT26LY4JnSQkTdjF0QYnQiH4Q1kveUcNRZrGpA4iZxVDq1aks5DisThDwqoGG
# rhaPOWyJwJsonM1Enzim5Jd60JqvGdpTLjSA5oSyTjw62lAulnYihInERYSAFyyz
# UhQaO7qSog1//RpPEXEsiVkJBq8BE9l5I+L7+l5SCBhNr/UwZAOer/4m4X6d0SKN
# GEPRx0kH1voikzx7gIQs+Oldqvb0sg+zAvOynBxzpd+Ac6s8bFtWe+eSyWYL/ZGr
# Jg9+PL1xir/Uh7KmOnzt/iVBAmfSRpAo1O72xQXvHFYYtIP7hTkPO/vzqF206WMc
# WQFHHjfp5gVcMZ5AYg6txw+Bbtzu8g0AfB054lgnhihuShpf0E923TTDQFdV755s
# NUlrzuGu2fs=
# =+JIK
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 18 Mar 2024 12:49:51 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin:
iotests: adapt to output change for recently introduced 'detached header' field
tests/qemu-iotests: Restrict tests using "--blockdev file" to the file protocol
tests/qemu-iotests: Fix some tests that use --image-opts for other protocols
tests/qemu-iotests: Restrict tests that use --image-opts to the 'file' protocol
tests/qemu-iotests: Restrict test 156 to the 'file' protocol
tests/qemu-iotests: Restrict test 134 and 158 to the 'file' protocol
tests/qemu-iotests: Restrict test 130 to the 'file' protocol
tests/qemu-iotests: Restrict test 114 to the 'file' protocol
tests/qemu-iotests: Restrict test 066 to the 'file' protocol
tests/qemu-iotests: Fix test 033 for running with non-file protocols
qemu-img: Fix Column Width and Improve Formatting in snapshot list
blockdev: Fix blockdev-snapshot-sync error reporting for no medium
iotests: Add test for reset/AioContext switches with NBD exports
nbd/server: Fix race in draining the export
mirror: Don't call job_pause_point() under graph lock
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since we *might* have user emulation with softmmu,
rename MAIN_SOFTMMU_TARGETS as MAIN_SYSTEM_TARGETS
to express 'system emulation targets'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240313213339.82071-3-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove the unnecessary "Sparc" at the beginning of the line and
put the chip information into parentheses so that it is clearer
which part of the line have to be passed to "-cpu" to specify a
different CPU.
Message-ID: <20240307174334.130407-4-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
some users were confused by this message showing under TCG:
Selected CPU generation is too new. Maximum supported model
in the configuration: 'xyz'
Clarify that the maximum can depend on the accel, and add a
hint to try a different one.
Also add a hint for features mismatch to suggest trying
different accel, QEMU and kernel versions.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-ID: <20240314213746.27163-1-cfontana@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240314152302.2324164-22-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
address shift is caused by switch to 32-bit SMBIOS entry point
which has slightly different size from 64-bit one and happens
to trigger a bit different memory layout.
Expected diff:
- Name (MEMA, 0x07FFE000)
+ Name (MEMA, 0x07FFF000)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20240314152302.2324164-21-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use smbios-entry-point-type='auto' for newer machine types as a workaround
for Windows not detecting SMBIOS tables. Which makes QEMU pick SMBIOS tables
based on configuration (with 2.x preferred and fallback to 3.x if the former
isn't compatible with configuration)
Default compat setting of smbios-entry-point-type after series
for pc/q35 machines:
* 9.0-newer: 'auto'
* 8.1-8.2: '64'
* 8.0-older: '32'
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2008
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-20-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20240314152302.2324164-19-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If SMBIOS v2 version is requested but number of cores/threads
are more than it's possible to describe with v2, error out
instead of silently ignoring the fact and filling core/thread
count with bogus values.
This will help caller to decide if it should fallback to
SMBIOSv3 when smbios-entry-point-type='auto'
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-18-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU for some time now uses SMBIOS 3.0 for PC/Q35 machines by
default, however Windows has a bug in locating SMBIOS 3.0
entrypoint and fails to find tables when booted on SeaBIOS
(on UEFI SMBIOS 3.0 tables work fine since firmware hands
over tables in another way)
Missing SMBIOS tables may lead to some issues for guest
though (worst are: possible reactiveation, inability to
get virtio drivers from 'Windows Update')
It's unclear at this point if MS will fix the issue on their
side. So instead of it (or rather in addition) this patch
will try to workaround the issue.
aka, use smbios-entry-point-type=auto to make QEMU try
generating conservative SMBIOS 2.0 tables and if that
fails (due to limits/requested configuration) fallback
to SMBIOS 3.0 tables.
With this in place majority of users will use SMBIOS 2.0
tables which work fine with (Windows + legacy BIOS).
The configurations that is not to possible to describe
with SMBIOS 2.0 will switch automatically to SMBIOS 3.0
(which will trigger Windows bug but there is nothing
QEMU can do here, so go and aks Microsoft to real fix).
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-17-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
later patches will use it to pick SMBIOS version at runtime
depending on configuration.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-16-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it will help to keep type 4 tables accounting correct in case
SMBIOS tables are built multiple times.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-15-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-14-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Current code uses mix of error_report()+exit(1)
and error_setg() to handle errors.
Use newer error_setg() everywhere, beside consistency
it will allow to detect error condition without killing
QEMU and attempt switch-over to SMBIOS3.x tables/entrypoint
in follow up patch.
while at it, clear smbios_tables pointer after freeing.
that will avoid double free if smbios_get_tables() is called
multiple times.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20240314152302.2324164-13-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
basically moving code around without functional change.
And exposing some symbols so that they could be shared
between smbbios.c and new smbios_legacy.c
plus some meson magic to build smbios_legacy.c only
for 'pc' machine and otherwise replace it with stub
if not selected.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20240314152302.2324164-12-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As a preparation to move legacy handling into a separate file,
add prefix 'smbios_' to type0/type1/have_binfile_bitmap/have_fields_bitmap
and expose them in smbios.h so that they can be reused in
legacy and modern code.
Doing it as a separate patch to avoid rename cluttering follow-up
patch which will move legacy code into a separate file.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20240314152302.2324164-11-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it will be used by follow up patch when legacy handling
is moved out into a separate file.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20240314152302.2324164-10-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
legacy mode doesn't support structures of type 2 and more,
and CLI has a check for '-smbios type' option, however it's
still possible to sneak in type4 as a blob with '-smbios file'
option. However doing the later makes SMBIOS tables broken
since SeaBIOS doesn't expect that.
Rather than trying to add support for type4 to legacy code
(both QEMU and SeaBIOS), simplify smbios_get_table_legacy()
by dropping not relevant check in legacy code and error out
on type4 blob.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-9-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
currently smbios_entry_add() preserves internally '-smbios type='
options but tables provided with '-smbios file=' are stored directly
into blob that eventually will be exposed to VM. And then later
QEMU adds default/'-smbios type' entries on top into the same blob.
It makes impossible to generate tables more than once, hence
'immutable' guard was used.
Make it possible to regenerate final blob by storing user provided
blobs into a dedicated area (usr_blobs) and then copy it when
composing final blob. Which also makes handling of -smbios
options consistent.
As side effect of this and previous commits there is no need to
generate legacy smbios_entries at the time options are parsed.
Instead compose smbios_entries on demand from usr_blobs like
it is done for non-legacy SMBIOS tables.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20240314152302.2324164-8-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
clean up smbios_set_defaults() which is reused by legacy
and non legacy machines from being aware of 'legacy' notion
and need to turn it off. And push legacy handling up to
PC machine code where it's relevant.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Acked-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it makes smbios_validate_table() independent from
smbios_smp_sockets global, which in turn lets
smbios_get_tables() avoid using not related legacy code.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-6-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
smbios_get_tables() bails out right away if leagacy mode is enabled
and won't generate any SMBIOS tables. At the same time x86 specific
fw_cfg_build_smbios() will genarate legacy tables and then proceed
to preparing temporary mem_array for useless call to
smbios_get_tables() and then discard it.
Drop legacy related check in smbios_get_tables() and return from
fw_cfg_build_smbios() early if legacy tables where built without
proceeding to non legacy part of the function.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Unfortunately having 2.0 machine type deprecated is not enough
to get rid of legacy SMBIOS handling since 'isapc' also uses
that and it's staying around.
Hence add test for CLI options handling to be sure that it
ain't broken during SMBIOS code refactoring.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cureently it not possible to run SMBIOS test without ACPI one,
which gets into the way when testing ACPI-less configs.
Extract SMBIOS testing into separate routines that could also
be run without ACPI dependency and use that for testing SMBIOS.
As the 1st user add "acpi/piix4/smbios-options" test case.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Mention the fact that this event is not yet implemented
to avoid confusion.
As requested by Michael.
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Message-Id: <20240313-pvpanic-note-v1-1-7f2571cdaedc@t-8ch.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Failure was noticed when running the tests for the qcow2 image format.
Fixes: 0bd779e27e ("crypto: Introduce 'detached-header' field in QCryptoBlockInfoLUKS")
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20240216101415.293769-1-f.ebner@proxmox.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tests that use "--blockdev" with the "file" driver cannot work with
other protocols, so we should mark them accordingly.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240315111108.153201-10-thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tests 263, 284 and detect-zeroes-registered-buf use qemu-io
with --image-opts so we have to enforce IMGOPTSSYNTAX=true here
to get $TEST_IMG in shape for other protocols than "file".
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240315111108.153201-9-thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These tests 188, 189 and 198 use qemu-io with --image-opts with additional
hard-coded parameters for the file protocol, so they cannot work for other
protocols. Thus we have to limit these tests to the file protocol only.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240315111108.153201-8-thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The test fails completely when you try to use it with a different
protocol, e.g. with "./check -ssh -qcow2 156".
The test uses some hand-crafted JSON statements which cannot work with other
protocols, thus let's change this test to only support the 'file' protocol.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240315111108.153201-7-thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit b25b387fa5 updated the iotests 134 and 158 to use the --image-opts
parameter for qemu-io with file protocol related options, but forgot to
update the _supported_proto line accordingly. So let's do that now.
Fixes: b25b387fa5 ("qcow2: convert QCow2 to use QCryptoBlock for encryption")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240315111108.153201-6-thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using "-drive ...,backing.file.filename=..." only works with the
file protocol, but not with URIs, so mark this test accordingly.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240315111108.153201-5-thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
iotest 114 uses "truncate" and the qcow2.py script on the destination file,
which both cannot deal with URIs. Thus this test needs the "file" protocol,
otherwise it fails with an error message like this:
truncate: cannot open 'ssh://127.0.0.1/tmp/qemu-build/tests/qemu-iotests/scratch/qcow2-ssh-114/t.qcow2.orig'
for writing: No such file or directory
Thus mark this test for "file protocol only" accordingly.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240315111108.153201-4-thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The hand-crafted json statement in this test only works if the test
is run with the "file" protocol, so mark this test accordingly.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240315111108.153201-3-thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When running iotest 033 with the ssh protocol, it fails with:
033 fail [14:48:31] [14:48:41] 10.2s output mismatch
--- /.../tests/qemu-iotests/033.out
+++ /.../tests/qemu-iotests/scratch/qcow2-ssh-033/033.out.bad
@@ -174,6 +174,7 @@
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
wrote 512/512 bytes at offset 2097152
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+qemu-io: warning: Failed to truncate the tail of the image: ssh driver does not support shrinking files
read 512/512 bytes at offset 0
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
We already check for the qcow2 format here, so let's simply also
add a check for the protocol here, too, to only test the truncation
with the file protocol.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240315111108.153201-2-thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When running the command `qemu-img snapshot -l SNAPSHOT` the output of
VM_CLOCK (measures the offset between host and VM clock) cannot to
accommodate values in the order of thousands (4-digit).
This line [1] hints on the problem. Additionally, the column width for
the VM_CLOCK field was reduced from 15 to 13 spaces in commit b39847a5
in line [2], resulting in a shortage of space.
[1]:
https://gitlab.com/qemu-project/qemu/-/blob/master/block/qapi.c?ref_type=heads#L753
[2]:
https://gitlab.com/qemu-project/qemu/-/blob/master/block/qapi.c?ref_type=heads#L763
This patch restores the column width to 15 spaces and makes adjustments
to the affected iotests accordingly. Furthermore, addresses a potential
source
of confusion by removing whitespace in column headers. Example, VM CLOCK
is modified to VM_CLOCK. Additionally a '--' symbol is introduced when
ICOUNT returns no output for clarity.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2062
Fixes: b39847a505 ("migration: introduce icount field for snapshots")
Signed-off-by: Abhiram Tilak <atp.exp@gmail.com>
Message-ID: <20240123050354.22152-2-atp.exp@gmail.com>
[kwolf: Fixed up qemu-iotests 261 and 286]
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When external_snapshot_abort() rejects a BlockDriverState without a
medium, it creates an error like this:
error_setg(errp, "Device '%s' has no medium", device);
Trouble is @device can be null. My system formats null as "(null)",
but other systems might crash. Reproducer:
1. Create a block device without a medium
-> {"execute": "blockdev-add", "arguments": {"driver": "host_cdrom", "node-name": "blk0", "filename": "/dev/sr0"}}
<- {"return": {}}
3. Attempt to snapshot it
-> {"execute":"blockdev-snapshot-sync", "arguments": { "node-name": "blk0", "snapshot-file":"/tmp/foo.qcow2","format":"qcow2"}}
<- {"error": {"class": "GenericError", "desc": "Device '(null)' has no medium"}}
Broken when commit 0901f67ecd made @device optional.
Use bdrv_get_device_or_node_name() instead. Now it fails as it
should:
<- {"error": {"class": "GenericError", "desc": "Device 'blk0' has no medium"}}
Fixes: 0901f67ecd ("qmp: Allow to take external snapshots on bs graphs node.")
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240306142831.2514431-1-armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This replicates the scenario in which the bug was reported.
Unfortunately this relies on actually executing a guest (so that the
firmware initialises the virtio-blk device and moves it to its
configured iothread), so this can't make use of the qtest accelerator
like most other test cases. I tried to find a different easy way to
trigger the bug, but couldn't find one.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240314165825.40261-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When draining an NBD export, nbd_drained_begin() first sets
client->quiescing so that nbd_client_receive_next_request() won't start
any new request coroutines. Then nbd_drained_poll() tries to makes sure
that we wait for any existing request coroutines by checking that
client->nb_requests has become 0.
However, there is a small window between creating a new request
coroutine and increasing client->nb_requests. If a coroutine is in this
state, it won't be waited for and drain returns too early.
In the context of switching to a different AioContext, this means that
blk_aio_attached() will see client->recv_coroutine != NULL and fail its
assertion.
Fix this by increasing client->nb_requests immediately when starting the
coroutine. Doing this after the checks if we should create a new
coroutine is okay because client->lock is held.
Cc: qemu-stable@nongnu.org
Fixes: fd6afc501a ("nbd/server: Use drained block ops to quiesce the server")
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240314165825.40261-2-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Calling job_pause_point() while holding the graph reader lock
potentially results in a deadlock: bdrv_graph_wrlock() first drains
everything, including the mirror job, which pauses it. The job is only
unpaused at the end of the drain section, which is when the graph writer
lock has been successfully taken. However, if the job happens to be
paused at a pause point where it still holds the reader lock, the writer
lock can't be taken as long as the job is still paused.
Mark job_pause_point() as GRAPH_UNLOCKED and fix mirror accordingly.
Cc: qemu-stable@nongnu.org
Buglink: https://issues.redhat.com/browse/RHEL-28125
Fixes: 004915a96a ("block: Protect bs->backing with graph_lock")
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240313153000.33121-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Document that PCIe Gen5/Gen6 speeds are only in QAPI
since 9.0 - the rest is since 4.0.
Cc: Lukas Stockner <lstockner@genesiscloud.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Fixes: c08da86dc4 ("pcie: Support PCIe Gen5/Gen6 link speeds")
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Break up long lines to fit under 80/90 char limit.
Fixes: 04f143d828 ("Implement SMBIOS type 9 v2.6")
Fixes: 735eee07d1 ("Implement base of SMBIOS type 9 descriptor.")
Cc: "Felix Wu" <flwu@google.com>
Cc: Nabih Estefan <nabihestefan@google.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We currently store the file descriptor used during the main outgoing
channel creation to use it again when creating the multifd
channels.
Since this fd is used for the first iochannel, there's risk that the
QIOChannel gets freed and the fd closed while outgoing_args.fd still
has it available. This could lead to an fd-reuse bug.
Duplicate the outgoing_args fd to avoid this issue.
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240315032040.7974-3-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
When doing migration using the fd: URI, QEMU will fetch the file
descriptor passed in via the monitor at
fd_start_outgoing|incoming_migration(), which means the checks at
migration_channels_and_transport_compatible() happen too soon and we
don't know at that point whether the FD refers to a plain file or a
socket.
For this reason, we've been allowing a migration channel of type
SOCKET_ADDRESS_TYPE_FD to pass the initial verifications in scenarios
where the socket migration is not supported, such as with fd + multifd.
The commit decdc76772 ("migration/multifd: Add mapped-ram support to
fd: URI") was supposed to add a second check prior to starting
migration to make sure a socket fd is not passed instead of a file fd,
but failed to do so.
Add the missing verification and update the comment explaining this
situation which is currently incorrect.
Fixes: decdc76772 ("migration/multifd: Add mapped-ram support to fd: URI")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240315032040.7974-2-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
At least for now cpu-topology is implemented only for KVM.
We already say this, but this tries to be more explicit,
and also show it in the examples.
This adds a new reference in the introduction that we can point to,
whenever we need to reference accelerators and how to select them.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-ID: <20240314172218.16478-1-cfontana@suse.de>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Tested-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Paolo Bonzini