Commit Graph

8864 Commits

Author SHA1 Message Date
Xie Yongji e57f2c31b6 virtio: add "use-started" property
In order to avoid migration issues, we introduce a "use-started"
property to the base virtio device to indicate whether use
"started" flag or not. This property will be true by default and
set to false when machine type <= 4.0.

Suggested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Message-Id: <20190626023130.31315-2-xieyongji@baidu.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-07-04 17:00:32 -04:00
Pankaj Gupta adf0748a49 virtio-pci: Proxy for virtio-pmem
We need a proxy device for virtio-pmem, and this device has to be the
actual memory device so we can cleanly hotplug it.

Forward memory device class functions either to the actual device or use
properties of the virtio-pmem device to implement these in the proxy.

virtio-pmem will only be compiled for selected, supported architectures
(that can deal with virtio/pci devices being memory devices). An
architecture that is prepared for that can simply enable
CONFIG_VIRTIO_PMEM to make it work.

As not all architectures support memory devices (and CONFIG_VIRTIO_PMEM
will be enabled per supported architecture), we have to move the PCI proxy
to a separate file.

Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
[ split up patches, memory-device changes, move pci proxy]
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190619094907.10131-5-pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-07-04 17:00:32 -04:00
Pankaj Gupta 9f583bdd47 virtio-pmem: sync linux headers
Add linux headers for virtio pmem. These are not yet upstream - include
them temporarily as merge window in which this is supposed to be is
coming up shortly. If virtio-pmem ends up not being merged
then this will be reverted and accordingly virtio-pmem dropped.

Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Message-Id: <20190619094907.10131-4-pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-07-04 17:00:32 -04:00
Peter Maydell 5c6a9dbef9 VFIO fixes 2019-07-02
- Remove outdated comment (Fabiano Rosas)
 
  - Log MSI-X eventfd switch failure, fix Coverity issue (Eric Auger)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJdG9kEAAoJECObm247sIsiqIwP/1G5H5KYlIc69kOW5teVwMHK
 AcwbnApizgiI4LFuynufYRHM0edyJ4eySAHR9CdqI2xLJ7mZ/CNa95gCZ67o/MMR
 hfqi15Ff8n6mC3Vx0BazSSjXoFm4jhiWmMnJ9DL2JesbLuoa7zuSe52ych75VEFa
 +neGEKdo+nMdFh4EhpgxUWFwc2lBm8yWyapnlmFjG1f1vRiXrg8QXjqYWg1t2/Oa
 LwZm79yx1f7ASgG2O8BKfRPxP7rNYXGUbCfBdedIm5V26wZVXP1eL2L995W57EI+
 /egMYMJ9kHHjkWqenViEY88Yc6p27Vjs3SZarW1Rg6HUIl8t5clfEKeUQDHTsljd
 L5rymXSwN51jcnX80E0S7WMdqnbXNU1zAv/Bor+MPFMPAhfIL+vexdOdItOKesAL
 pro1G64XvWpfzajJ7VII8q7B0xRK7mmC0mulOny6gHOi8QOuBBrONIZXBpJQkFlC
 xYq9Zsc5Gcu4XwlqpMwlqfUCrk1LR3100covL36/4+px6Wqoda6FqkIPI/VJzG3B
 0C5eWyHzUSblT0LEpgmuW7GgF2h9/I5MvA443mjZv1ZyJVdmRbnqCUGGpV4DGL+O
 HJeCFmOR9mBiXOMBMTvjqbkLlW0pL9snyzii2AVX0I8JrMjFRLG9CZnVTx9IlNxm
 z4z8CTcwc+SvhQrzLplI
 =VAt2
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/awilliam/tags/vfio-fixes-20190702.0' into staging

VFIO fixes 2019-07-02

 - Remove outdated comment (Fabiano Rosas)

 - Log MSI-X eventfd switch failure, fix Coverity issue (Eric Auger)

# gpg: Signature made Tue 02 Jul 2019 23:21:56 BST
# gpg:                using RSA key 239B9B6E3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>" [full]
# gpg:                 aka "Alex Williamson <alex@shazbot.org>" [full]
# gpg:                 aka "Alex Williamson <alwillia@redhat.com>" [full]
# gpg:                 aka "Alex Williamson <alex.l.williamson@gmail.com>" [full]
# Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B  8A90 239B 9B6E 3BB0 8B22

* remotes/awilliam/tags/vfio-fixes-20190702.0:
  vfio/pci: Trace vfio_set_irq_signaling() failure in vfio_msix_vector_release()
  vfio-common.h: Remove inaccurate comment

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-04 13:05:14 +01:00
Peter Maydell aff8cee805 RISC-V Patches for the 4.1 Soft Freeze, Part 2 v3
This pull request contains a handful of patches that I'd like to target
 for the 4.1 soft freeze.  There are a handful of new features:
 
 * Support for the 1.11.0, the latest privileged specification.
 * Support for reading and writing the PRCI registers.
 * Better control over the ISA of the target machine.
 * Support for the cpu-topology device tree node.
 
 Additionally, there are a handful of bug fixes including:
 
 * Load reservations are now broken by both store conditional and by
   scheduling, which fixes issues with parallel applications.
 * Various fixes to the PMP implementation.
 * Fixes to the 32-bit linux-user syscall ABI.
 * Various fixes for instruction decodeing.
 * A fix to the PCI device tree "bus-range" property.
 
 This boots 32-bit and 64-bit OpenEmbedded.
 
 Changes since v2 [riscv-for-master-4.1-sf1-v2]:
 
 * Dropped OpenSBI.
 
 Changes since v1 [riscv-for-master-4.1-sf1]:
 
 * Contains a fix to the sifive_u OpenSBI integration.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEAM520YNJYN/OiG3470yhUCzLq0EFAl0caa0THHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRDvTKFQLMurQRTNEACwLeajFWIdeltz9PpzlmbABoY9p8rT
 amMVjEcisMmIzV7UjLcmqYAyPUFb2KvNy5EA15op0nQKGv7Mm7c4P7V5/eQyz9wE
 9/81s3OoOuRa79mwgF3aekA6iQXb0ID+kMaIFSrbTTyECOULb2kb4/xxOH+N13wh
 8VfYBdgxsvC37DDShXuzGOdtWpu1wZDgYwYOHAIns/r90FYA1w2vJhjn72AiDfnY
 QKwm6FHiplraMfbURRxbgU5oUIXsCelYNB3Fu9dFOuVwgmwrwFHJIG1Mi5pvMkbo
 vRnSDX5vKKpeyFj6U23RnCJpxoORe0Bp6GnD5MbByUr9oroBbD3dkNryXU0da5jN
 e5Jje3F8v/g3KdRUm6AQJb6JBBOZu4uSUn9jUfqlNLFDvUDLTq74kfJHLzsWr4Ds
 k/rP3fmyked27KnEwCOzAEEDI4Z3exbwnoPiP5ik92ZkSL7PVwLpWvB/8tn8HQab
 ldq8w/piUkbC9ug2p07TFg6aST8YjzuGHtOW4M8TpX5cuAiHPbjS54dj88+EL5i7
 shBWFKEuKV0ESVgIBwJu9qlX5QvQWJA4LSo35PyrGJb6xV+lQ3j0pdcOojL6ZSkk
 JDbQtC1nsxDf/Qt4vHc4VbOZQChO+FYs2Smin8Wl5gN+hReY6lB/ZtHjYl7uw2bC
 9Ijy2OkCjtz4mw==
 =lliO
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.1-sf1-v3' into staging

RISC-V Patches for the 4.1 Soft Freeze, Part 2 v3

This pull request contains a handful of patches that I'd like to target
for the 4.1 soft freeze.  There are a handful of new features:

* Support for the 1.11.0, the latest privileged specification.
* Support for reading and writing the PRCI registers.
* Better control over the ISA of the target machine.
* Support for the cpu-topology device tree node.

Additionally, there are a handful of bug fixes including:

* Load reservations are now broken by both store conditional and by
  scheduling, which fixes issues with parallel applications.
* Various fixes to the PMP implementation.
* Fixes to the 32-bit linux-user syscall ABI.
* Various fixes for instruction decodeing.
* A fix to the PCI device tree "bus-range" property.

This boots 32-bit and 64-bit OpenEmbedded.

Changes since v2 [riscv-for-master-4.1-sf1-v2]:

* Dropped OpenSBI.

Changes since v1 [riscv-for-master-4.1-sf1]:

* Contains a fix to the sifive_u OpenSBI integration.

# gpg: Signature made Wed 03 Jul 2019 09:39:09 BST
# gpg:                using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
# gpg:                issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg:                 aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88  6DF8 EF4C A150 2CCB AB41

* remotes/palmer/tags/riscv-for-master-4.1-sf1-v3: (32 commits)
  hw/riscv: Extend the kernel loading support
  hw/riscv: Add support for loading a firmware
  hw/riscv: Split out the boot functions
  riscv: sifive_u: Update the plic hart config to support multicore
  riscv: sifive_u: Do not create hard-coded phandles in DT
  disas/riscv: Fix `rdinstreth` constraint
  disas/riscv: Disassemble reserved compressed encodings as illegal
  riscv: virt: Add cpu-topology DT node.
  RISC-V: Update syscall list for 32-bit support.
  RISC-V: Clear load reservations on context switch and SC
  RISC-V: Add support for the Zicsr extension
  RISC-V: Add support for the Zifencei extension
  target/riscv: Add support for disabling/enabling Counters
  target/riscv: Remove user version information
  target/riscv: Require either I or E base extension
  qemu-deprecated.texi: Deprecate the RISC-V privledge spec 1.09.1
  target/riscv: Set privledge spec 1.11.0 as default
  target/riscv: Add the mcountinhibit CSR
  target/riscv: Add the privledge spec version 1.11.0
  target/riscv: Restructure deprecatd CPUs
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-04 11:09:19 +01:00
Peter Maydell f0577c616c vga: virtio fixes, bitbang i2c asan fix, install ati vgabios.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJdHG0YAAoJEEy22O7T6HE46qAP/1JrYFrl6TolodRhgijmwLsD
 +7NCxEnYdSQYZUT/GkYIrT3/uHlCrM5UcV/fuTcKULJxGVoEK2bjxG+5dxmy9Cnf
 j6Urs7Trnb8Ygl2Wx6HYMEwNkkUxmgdyxbmWhElBjVMdOhrGaykKgLRoGITebcGH
 pDlFhU0J/XwBa6PL4itCeMwRM9ITPYKQ/g+x25QfgyvzZESNJ2zc1WA1eRPhvWSz
 EfrXa+diV2vyrdG3BFl7IJ/uO/xFFccXSoW6NhvKF+R5NZ/2agzpOF1h5LVuQxLI
 fGGUqsTcJ8r2/VaXMZD9VmzlCo5V92vpy4Cb7mCzSR8xjt04Utv/RORPlIC5Ierl
 a1pqVdrc7nEAaS/cvDV9ew0/zDtW97ScxnMhTWN1zDAEEdmhg1v5Tj7/F/JYlZ3x
 MErytHox8pmbpFgLnazqRepp79W9wjAQjKgHZ8UgnFh+M2IbQ6xo/BfIFUVCGtzb
 d07ooaZkOxC+fXE7bma4rWmsnSNfTRv83zWHjgbUukTAg7EkkiDlLldifqSnez4G
 Z6583/xR80SQF9IFUJ8INLKIckxOCzcz2CZfuNsW4IhBdzBpny3YOFwLw+EIFNb5
 prVi8xmyPP8UbklK51DbZFl8ILncdywUfW8TuO91noELz/GqJH92uNKR/mmFowsq
 XhkQc2T2xo7trVRWw+vs
 =Grh1
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20190703-pull-request' into staging

vga: virtio fixes, bitbang i2c asan fix, install ati vgabios.

# gpg: Signature made Wed 03 Jul 2019 09:53:44 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20190703-pull-request:
  Add ati vgabios to INSTALL_BLOBS.
  hw/i2c/bitbang_i2c: Use in-place rather than malloc'd bitbang_i2c_interface struct
  virtio-gpu: check if the resource already exists in virtio_gpu_load()
  virtio-gpu: fix unmap in error path

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-03 22:57:56 +01:00
Peter Maydell 41742927ee hw/i2c/bitbang_i2c: Use in-place rather than malloc'd bitbang_i2c_interface struct
Currently the bitbang_i2c_init() function allocates a
bitbang_i2c_interface struct which it returns.  This is unfortunate
because it means that if the function is used from a DeviceState
init method then the memory will be leaked by an "init then delete"
cycle, as used by the qmp/hmp commands that list device properties.

Since three out of four of the uses of this function are in
device init methods, switch the function to do an in-place
initialization of a struct that can be embedded in the
device state struct of the caller.

This fixes LeakSanitizer leak warnings that have appeared in the
patchew configuration (which only tries to run the sanitizers
for the x86_64-softmmu target) now that we use the bitbang-i2c
code in an x86-64 config.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190702163844.20458-1-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-07-03 10:51:35 +02:00
Peter Maydell 374f63f681 Monitor patches for 2019-07-02
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAl0bQhUSHGFybWJydUBy
 ZWRoYXQuY29tAAoJEDhwtADrkYZTOgoP/3v1ZAg4ulTrUx/KO8C80sA3qqaPgkbP
 s8DFUwtjWcDrefGejIep4C0dxhY5vD1oNg9JeK+6O4IInijlg30kildBj85nPa5J
 Z55hZFIGWW1CSMzeSlOMWH1QdYdGPXkGRe8ApXPqRH4VpsdulC+vErQl1YrleNtv
 B8K8402hMOKL+TsheBpdnbM+1hXRj8zBGfobiY/9eLex30uaNDVOd3bIpx0M63fr
 kcwOOPKQeUTLPbUvI6mVQtTkNFCzk6Wmi5vMyT3bSe2ZMLNnEFQZXabcgSBverTK
 9ar5MxTMHIplstWVQEceXN3BLVlIsmunUsuCSHqmX6tdX37EKiJXZImiz0i98bnq
 5SFNAHntr3JDMdqqZJX+v1DvmGbPfv/H5poWk+wQfFBkjDykExEd77v9kuOc4aVZ
 HkEYNbAPVTjfm5xXxn8yXdY++tVsQKV4q2T4OX9WacMu5sJujDm9qIlVaE2A3Cdc
 ePM4tNrHJ0MNDHn2CG/wPEaLelfylLlL/Aai/WQe/YPVrVOHroT4zvwVv6+QJB2k
 MWqmRzGEOYDevPs8PizPetEHiirTHyrIufuleFJglBVSNi5V2LpG5d97Pal0Dn2k
 1ZzSnonXGnhx7VoaqbxhAEj8vAI42gJJ3Q/f6VW2q2rBAv4/oc9jeQVx1SYGFKCu
 QbNALrVpyv+5
 =jtpi
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2019-07-02-v2' into staging

Monitor patches for 2019-07-02

# gpg: Signature made Tue 02 Jul 2019 12:37:57 BST
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-monitor-2019-07-02-v2:
  dump: Move HMP command handlers to dump/
  MAINTAINERS: Add Windows dump to section "Dump"
  dump: Move the code to dump/
  qapi: Split dump.json off misc.json
  qapi: Rename target.json to misc-target.json
  qapi: Split machine-target.json off target.json and misc.json
  hw/core: Collect HMP command handlers in hw/core/
  hw/core: Collect QMP command handlers in hw/core/
  hw/core: Move numa.c to hw/core/
  qapi: Split machine.json off misc.json
  MAINTAINERS: Merge sections CPU, NUMA into Machine core
  qom: Move HMP command handlers to qom/
  qom: Move QMP command handlers to qom/
  qapi: Split qom.json and qdev.json off misc.json
  hmp: Move hmp.h to include/monitor/
  Makefile: Don't add monitor/ twice to common-obj-y
  MAINTAINERS: Make section "QOM" cover qdev as well
  MAINTAINERS: new maintainers for QOM

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-03 00:16:43 +01:00
Fabiano Rosas d53f7a61c3 vfio-common.h: Remove inaccurate comment
This is a left-over from "f4ec5e26ed vfio: Add host side DMA window
capabilities", which added support to more than one DMA window.

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-07-02 13:12:53 -06:00
Peter Maydell 506179e421 ppc patch queue 2019-07-2
Here's my next pull request for qemu-4.1.  I'm not sure if this will
 squeak in just before the soft freeze, or just after.  I don't think
 it really matters - most of this is bugfixes anyway.  There's some
 cleanups which aren't stictly bugfixes, but which I think are safe
 enough improvements to go in the soft freeze.  There's no true feature
 work.
 
 Unfortunately, I wasn't able to complete a few of my standard battery
 of pre-pull tests, due to some failures that appear to also be in
 master.  I'm hoping that hasn't missed anything important in here.
 
 Highlights are:
   * A number of fixe and cleanups for the XIVE implementation
   * Cleanups to the XICS interrupt controller to fit better with the new
     XIVE code
   * Numerous fixes and improvements to TCG handling of ppc vector
     instructions
   * Remove a number of unnnecessary #ifdef CONFIG_KVM guards
   * Fix some errors in the PCI hotplug paths
   * Assorted other fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEdfRlhq5hpmzETofcbDjKyiDZs5IFAl0a9JMACgkQbDjKyiDZ
 s5ItkQ//bpkDkztJfRbOB7cgFVQCbXIJ5mpG7PBnBJDohXRtEsjCunNwL+GelRMl
 FizPJO3sGpR2f+MgH+7MJ+Y6ESSwDhI6u8TbH4MjGTc9kWsqV1YUy6nB3grxwqG7
 k9AXN0z6e1MZLaZuseGBrZmPzZcvNwnPKFqEU06ZXqIWscNgXWXteyO5JTZW4O9M
 +Ttiser/f6dRCHKrKnlJp3D1blBaJVUXzZTJVqmH6AiJy/xfHq7Ak6LQKrVrt8Vc
 I2hGMEqyDE+ppr8cuGku4KR8GWUen9m0F0bTVGjPsG1io+spAznxNZL/Z+KJPzrI
 cCFaKoyNknIicx/0/iil5TEuu4rz985erNZBcglarK/w9w0RyW2LlcDbvzV+gO6c
 Ln/1WLZZh4WufR4s4195zUJwZPwGp0E4xFdfk20ulzVzV4wVCMbNJHZpchHYFMi3
 fW4Yzhpq5zaOTIaew5+tWST+8RuduacZ/Rm+f9LNui42uA52/EMoD8Vo34n8CIro
 9DPOS64Jk9BjIr9bMstFOBCyTVt64IFzskDOMCSCznUl51Hm0ytfAJH3Gty7YazQ
 ZxncazzlC9E6OzCTYRDNSPnTKGFvccGmuir/SXPWf3bn8oBC9p3P1mPK3cgk//as
 CvWW8Y/QAJOrxEls5QZzpIBjxqAcMoMVjir6l1OT2/gvBTJto1Q=
 =QAyU
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190702' into staging

ppc patch queue 2019-07-2

Here's my next pull request for qemu-4.1.  I'm not sure if this will
squeak in just before the soft freeze, or just after.  I don't think
it really matters - most of this is bugfixes anyway.  There's some
cleanups which aren't stictly bugfixes, but which I think are safe
enough improvements to go in the soft freeze.  There's no true feature
work.

Unfortunately, I wasn't able to complete a few of my standard battery
of pre-pull tests, due to some failures that appear to also be in
master.  I'm hoping that hasn't missed anything important in here.

Highlights are:
  * A number of fixe and cleanups for the XIVE implementation
  * Cleanups to the XICS interrupt controller to fit better with the new
    XIVE code
  * Numerous fixes and improvements to TCG handling of ppc vector
    instructions
  * Remove a number of unnnecessary #ifdef CONFIG_KVM guards
  * Fix some errors in the PCI hotplug paths
  * Assorted other fixes

# gpg: Signature made Tue 02 Jul 2019 07:07:15 BST
# gpg:                using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-4.1-20190702: (49 commits)
  spapr/xive: Add proper rollback to kvmppc_xive_connect()
  ppc/xive: Fix TM_PULL_POOL_CTX special operation
  ppc/pnv: Rework cache watch model of PnvXIVE
  ppc/xive: Make the PIPR register readonly
  ppc/xive: Force the Physical CAM line value to group mode
  spapr/xive: simplify spapr_irq_init_device() to remove the emulated init
  spapr/xive: rework the mapping the KVM memory regions
  spapr_pci: Unregister listeners before destroying the IOMMU address space
  target/ppc: improve VSX_FMADD with new GEN_VSX_HELPER_VSX_MADD macro
  target/ppc: decode target register in VSX_EXTRACT_INSERT at translation time
  target/ppc: decode target register in VSX_VECTOR_LOAD_STORE_LENGTH at translation time
  target/ppc: introduce GEN_VSX_HELPER_R2_AB macro to fpu_helper.c
  target/ppc: introduce GEN_VSX_HELPER_R2 macro to fpu_helper.c
  target/ppc: introduce GEN_VSX_HELPER_R3 macro to fpu_helper.c
  target/ppc: introduce GEN_VSX_HELPER_X1 macro to fpu_helper.c
  target/ppc: introduce GEN_VSX_HELPER_X2_AB macro to fpu_helper.c
  target/ppc: introduce GEN_VSX_HELPER_X2 macro to fpu_helper.c
  target/ppc: introduce separate generator and helper for xscvqpdp
  target/ppc: introduce GEN_VSX_HELPER_X3 macro to fpu_helper.c
  target/ppc: introduce separate VSX_CMP macro for xvcmp* instructions
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-02 18:56:44 +01:00
Pankaj Gupta 5f503cd9f3 virtio-pmem: add virtio device
This is the implementation of virtio-pmem device. Support will require
machine changes for the architectures that will support it, so it will
not yet be compiled. It can be unlocked with VIRTIO_PMEM_SUPPORTED per
machine and disabled globally via VIRTIO_PMEM.

We cannot use the "addr" property as that is already used e.g. for
virtio-pci/pci devices. And we will have e.g. virtio-pmem-pci as a proxy.
So we have to choose a different one (unfortunately). "memaddr" it is.
That name should ideally be used by all other virtio-* based memory
devices in the future.
    -device virtio-pmem-pci,id=p0,bus=bux0,addr=0x01,memaddr=0x1000000...

Acked-by: Markus Armbruster <armbru@redhat.com>
[ QAPI bits ]
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
[ MemoryDevice/MemoryRegion changes, cleanups, addr property "memaddr",
  split up patches, unplug handler ]
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190619094907.10131-2-pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2019-07-02 12:59:22 -04:00
Peter Maydell bf1b9edeb0 Block patches for 4.1-rc0:
- The stream job no longer relies on a fixed base node
 - The rbd block driver can now accomodate growing formats like qcow2
 -----BEGIN PGP SIGNATURE-----
 
 iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl0aubYSHG1yZWl0ekBy
 ZWRoYXQuY29tAAoJEPQH2wBh1c9AglcH/1EoMnmibLg4BumWh+kPMKIXthoMSN0Z
 cVK8/OhpR66tAaT0OatX+CKYtfefAdX5Km6Oipa4ygALF21aON6+N2lss+K//ieK
 cg71CxncmgYlAS358wdJBgzCCzE06+fCY2JYLa/vRgVoKFJjXwVvlmYymuOA3RN/
 htJB64tXZheyEX89B7fqBdlDAf2SEomXVVPgKp9QMPKaP+JchGdZ26VxHFXEEJLo
 NZuMZpUUVNSkiDkpEh6ED/6jDFFpTjLzdoNdVnRJmHpeKNEPrLQVxqyjD1bagyt/
 InjEtMGQ9i1v4B1IODdYhyLas/bQsituG7Dj149le02307qcvZbLi7s=
 =RY+3
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2019-07-02' into staging

Block patches for 4.1-rc0:
- The stream job no longer relies on a fixed base node
- The rbd block driver can now accomodate growing formats like qcow2

# gpg: Signature made Tue 02 Jul 2019 02:56:06 BST
# gpg:                using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg:                issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1  1829 F407 DB00 61D5 CF40

* remotes/maxreitz/tags/pull-block-2019-07-02:
  block/stream: introduce a bottom node
  block/stream: refactor stream_run: drop goto
  block: include base when checking image chain for block allocation
  block/rbd: increase dynamically the image size

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-02 17:41:01 +01:00
Peter Maydell 8ef53cdb50 -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
 
 iQEcBAABAgAGBQJdGr/CAAoJEO8Ells5jWIRJY4H/10pMuRX11WDSQqc/ejQMywj
 3v+CBFTaNnCvbPqEFKH6p/1Y1KV/G1+ODzuat71QVjHqzlX/tCcLtNVrzIsozal+
 R42PADVpBuOGYC9CBBKZxKpORm4YEOApwERKAmjoTDKJUbho1TOOt60Vz7ctlybb
 nlEDdNogSKZ7ZxSj/Nn5NvaZnQPpS3ZpFcqMwr1ofQtCuUsYi9DNREd+NLwaknZS
 O3ib6nAFxBH4dpA0bSKWJHZi8QU1GcIdvs0iDeSnzvlCgwjbv3pM6eYkse90jXq+
 Sq0ZxSMb+97CCu54b5wu8EqOhzBaasVcKApR3NRQc5vHBI/1WMNB5eFWmfSpzWM=
 =3+Zi
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging

# gpg: Signature made Tue 02 Jul 2019 03:21:54 BST
# gpg:                using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
  migration/colo.c: Add missed filter notify for Xen COLO.
  COLO-compare: Add colo-compare remote notify support
  COLO-compare: Make the compare_chr_send() can send notification message.
  COLO-compare: Add remote notification chardev handler frame
  COLO-compare: Add new parameter to communicate with remote colo-frame
  net/announce: Expand test for stopping self announce
  net/announce: Add HMP optional ID
  net/announce: Add optional ID
  net/announce: Add HMP optional interface list
  net/announce: Allow optional list of interfaces
  net: remove unused get_str_sep() function
  net: use g_strsplit() for parsing host address and port
  net: avoid using variable length array in net_client_init()
  net: fix assertion failure when ipv6-prefixlen is not a number
  ftgmac100: do not link to netdev
  qemu-bridge-helper: Document known shortcomings
  MAINTAINERS: Add qemu-bridge-helper.c to "Network device backends"

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-02 16:41:28 +01:00
Peter Maydell c4e42a9c2b target-arm queue:
* hw/arm/boot: fix direct kernel boot with initrd
  * hw/arm/msf2-som: Exit when the cpu is not the expected one
  * i.mx7: fix bugs in PCI controller needed to boot recent kernels
  * aspeed: add RTC device
  * aspeed: fix some timer device bugs
  * aspeed: add swift-bmc board
  * aspeed: vic: Add support for legacy register interface
  * aspeed: add aspeed-xdma device
  * Add new sbsa-ref board for aarch64
  * target/arm: code refactoring in preparation for support of
    compilation with TCG disabled
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAl0aNvIZHHBldGVyLm1h
 eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3uoEEACbv26LfzT5TIu1wlBaqSq5
 CynAY3oJnrad6oH4KE0NiFxbgAvBGXj7mKX55uqJnrI6HY2ADVXbDE3rtVK7TG6O
 4Swe7CCIOZV62/e5RmrWgqsCwxRsAsyLsQjmnL97WKgVTv/C33+iL6JgP+ApnK5D
 4eYAitaxK6GB1+oIl6U6MgPROEOhoVGZ/U6Ejf7itL3dCcn8M5aMqOBn40WR5k/s
 rPM8tZASZuEV29qlmQZzatj0yETbjht2BOzO30/A5X9r3q9Lbwq6tP3RyTLE3KtL
 a2+nYobV8PP1WxjSZjAUMtwp8GiZvhB4jcaKpfN+CMIF+uhXVvy/idBHXzunclJ+
 PZpuBozrSd3jFxmMzCZOddsy0y7MIuZWCw7fdCvYLkw4OSExYJkbTzUxE1jSA5Vb
 FbB983WvpYQXX5iT1Q1UGOqKnlgVfVC5eADBSCRGv4mqXOOf6xgoTgIEUgwdL1JN
 vKPsUQgogAJxELyddStj9aTrzHO50Qba8ahLLfIQWa0qFday+CckAqxjf5BROguc
 ak+jvdV8IoMSQYeZCUp8lmV7YCwbEozQ9cd+OGn4PdEKbPfSexiYFUWPxQgUg3EY
 Ul0e+sPXk4EZ1zMEU7752gKFTjZxwJ/0chVtxzjpqfA3cww5I0DR2SAlOCiYUmWq
 SRguMEJXOYaXjqaCIjrXVg==
 =bjIc
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190701' into staging

target-arm queue:
 * hw/arm/boot: fix direct kernel boot with initrd
 * hw/arm/msf2-som: Exit when the cpu is not the expected one
 * i.mx7: fix bugs in PCI controller needed to boot recent kernels
 * aspeed: add RTC device
 * aspeed: fix some timer device bugs
 * aspeed: add swift-bmc board
 * aspeed: vic: Add support for legacy register interface
 * aspeed: add aspeed-xdma device
 * Add new sbsa-ref board for aarch64
 * target/arm: code refactoring in preparation for support of
   compilation with TCG disabled

# gpg: Signature made Mon 01 Jul 2019 17:38:10 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20190701: (46 commits)
  target/arm: Declare some M-profile functions publicly
  target/arm: Declare arm_log_exception() function publicly
  target/arm: Restrict PSCI to TCG
  target/arm/vfp_helper: Restrict the SoftFloat use to TCG
  target/arm/vfp_helper: Extract vfp_set_fpscr_from_host()
  target/arm/vfp_helper: Extract vfp_set_fpscr_to_host()
  target/arm/vfp_helper: Move code around
  target/arm: Move TLB related routines to tlb_helper.c
  target/arm: Declare get_phys_addr() function publicly
  target/arm: Move CPU state dumping routines to cpu.c
  target/arm: Move the DC ZVA helper into op_helper
  target/arm: Fix coding style issues
  target/arm: Fix multiline comment syntax
  target/arm/helper: Remove unused include
  target/arm: Add copyright boilerplate
  target/arm: Makefile cleanup (softmmu)
  target/arm: Makefile cleanup (KVM)
  target/arm: Makefile cleanup (ARM)
  target/arm: Makefile cleanup (Aarch64)
  hw/arm: Add arm SBSA reference machine, devices part
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-02 12:58:32 +01:00
Markus Armbruster d06b747bd5 qapi: Split dump.json off misc.json
Move commands dump-guest-memory, query-dump,
query-dump-guest-memory-capability with their types from misc.json to
new dump.json.  Add dump.json to MAINTAINERS section "Dump".

Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-15-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-02 13:37:00 +02:00
Markus Armbruster 55225c853a hw/core: Collect HMP command handlers in hw/core/
Move the HMP handlers related to qapi/machine.json to
hw/core/machine-hmp-cmds.c, where they are covered by MAINTAINERS
section "Machine core", just like qapi/machine.json.

Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-12-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-07-02 13:37:00 +02:00
Markus Armbruster 52924dea17 hw/core: Collect QMP command handlers in hw/core/
The handlers for qapi/machine.json's QMP commands are spread over
cpus.c, hw/core/numa.c, monitor/misc.c, monitor/qmp-cmds.c, and vl.c.
Move them all to new hw/core/machine-qmp-cmds.c, where they are
covered by MAINTAINERS section "Machine core", just like
qapi/machine.json.

Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-11-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-02 13:37:00 +02:00
Markus Armbruster 8ac25c8442 qapi: Split machine.json off misc.json
Move commands cpu-add, query-cpus, query-cpus-fast,
query-current-machine, query-hotpluggable-cpus, query-machines,
query-memdev, and set-numa-node with their types from misc.json to new
machine.json.  Also move types X86CPURegister32 and
X86CPUFeatureWordInfo.  Add machine.json to MAINTAINERS section
"Machine core".

Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-9-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-02 13:37:00 +02:00
Markus Armbruster 3950a37716 qom: Move HMP command handlers to qom/
Move the HMP command handlers related to QOM handlers from
monitor/hmp-cmds.c and qdev-monitor.c to new qom/qom-hmp-cmds.c, where
they are covered by MAINTAINERS section QOM.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-7-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
[Also move hmp_info_qom_tree(), tweak commit message accordingly]
2019-07-02 13:36:49 +02:00
Peter Maydell d247c8e7f4 - cleanup/refactoring in the cpu feature code
- fix for a tcg test case
 - halt/clear support for vfio-ccw, and use a new helper
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEw9DWbcNiT/aowBjO3s9rk8bwL68FAl0Z6bkSHGNvaHVja0By
 ZWRoYXQuY29tAAoJEN7Pa5PG8C+vwugQAJPAlCvafepuaZHGvM/hYJVg+goVvbd/
 EQhDBVFNWcMXCR6LSt67NAgAjDu21KFPWy+CC/JtzqiXWnGZdwSHd9ydfmsW+Z4t
 /aGrNv6MQ9WuEZ7hujsWEyAbMxIY1LnE9noulQBOvw28BcxRVNeQlFt9c5bcEdkb
 2/Mvs8X3+VyPes4lnNre6AYSQdCwTqrhcExwONHeQloy7fK6GU118oMjjn8QUabl
 NiNIseij2WkuFaqZGf/CPgtwAl6d7OZFPXaqgRVoGT+wKsE2u8dkc4VAYusS8Mrj
 lZ8XEkoYRUZVI6mkUcHPY66cvRUvlOjc+pXVw2p0GqzLTiXrr9ZOQIm0tiwTgFs1
 EwZv2B5nW7T/jmqh4MZRgs+Qrmr04NHdsoA5y4vDx1cmq7C80Itn5CIwlntXlwMQ
 N+949bNj8ZL38CE4ksaYfp5+mfB1ay7FUEL/jEgOXFsWYXMmPlC1r2lZ/1ARBjGw
 iCNuCq/9fjBTbHPG5ulXP+z74eHf3Qw6wxT7SXaK3RiY1gN6ZKSTTnWVJws0ai65
 OK76Ls3WiCYKYZpT06snIhOkRSt9+gd4DUtF8oLfgWYV7RDkCVC7Fr2hwS570dUh
 Sz7nGM2vlAcfXYMeRR4wQZV/hQDVgX5bxlI0cvvrsefVZ1DxuaT0GXBmktls7Pns
 N6j6sK8DwTSB
 =0dnG
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20190701' into staging

- cleanup/refactoring in the cpu feature code
- fix for a tcg test case
- halt/clear support for vfio-ccw, and use a new helper

# gpg: Signature made Mon 01 Jul 2019 12:08:41 BST
# gpg:                using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg:                issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg:                 aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg:                 aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg:                 aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20190701:
  s390x: add cpu feature/model files to KVM section
  vfio-ccw: support async command subregion
  vfio-ccw: use vfio_set_irq_signaling
  s390x/cpumodel: Prepend KDSA features with "KDSA"
  s390x/cpumodel: Rework CPU feature definition
  tests/tcg/s390x: Fix alignment of csst parameter list

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-02 11:48:39 +01:00
Markus Armbruster 275307aaab hmp: Move hmp.h to include/monitor/
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-4-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-07-02 07:19:45 +02:00
Dr. David Alan Gilbert 944458b659 net/announce: Add optional ID
Previously there was a single instance of the timer used by
monitor triggered announces, that's OK, but when combined with the
previous change that lets you have announces for subsets of interfaces
it's a bit restrictive if you want to do different things to different
interfaces.

Add an 'id' field to the announce, and maintain a list of the
timers based on id.

This allows you to for example:
    a) Start an announce going on interface eth0 for a long time
    b) Start an announce going on interface eth1 for a long time
    c) Kill the announce on eth0 while leaving eth1 going.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-02 10:21:06 +08:00
Dr. David Alan Gilbert ef2fdbfb4d net/announce: Allow optional list of interfaces
Allow the caller to restrict the set of interfaces that announces are
sent on.  The default is still to send on all interfaces.

e.g.

  { "execute": "announce-self", "arguments": { "initial": 50, "max": 550, "rounds": 5, "step": 50, "interfaces": ["vn2", "vn1"] } }

This doesn't affect the behaviour of migraiton announcments.

Note: There's still only one timer for the qmp command, so that
performing an 'announce-self' on one list of interfaces followed
by another 'announce-self' on another list will stop the announces
on the existing set.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-02 10:21:06 +08:00
Andrey Shinkevich 170d3bd341 block: include base when checking image chain for block allocation
This patch is used in the 'block/stream: introduce a bottom node'
that is following. Instead of the base node, the caller may pass
the node that has the base as its backing image to the function
bdrv_is_allocated_above() with a new parameter include_base = true
and get rid of the dependency on the base that may change during
commit/stream parallel jobs. Now, if the specified base is not
found in the backing image chain, the QEMU will abort.

Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 1559152576-281803-2-git-send-email-andrey.shinkevich@virtuozzo.com
[mreitz: Squashed in the following as a rebase on conflicting patches:]
Message-id: e3cf99ae-62e9-8b6e-5a06-d3c8b9363b85@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-07-02 03:53:04 +02:00
Cédric Le Goater d0e9bc0407 spapr/xive: simplify spapr_irq_init_device() to remove the emulated init
The init_emu() handles are now empty. Remove them and rename
spapr_irq_init_device() to spapr_irq_init_kvm().

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190614165920.12670-3-clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-02 09:43:58 +10:00
Cédric Le Goater 981b1c6266 spapr/xive: rework the mapping the KVM memory regions
Today, the interrupt device is fully initialized at reset when the CAS
negotiation process has completed. Depending on the KVM capabilities,
the SpaprXive memory regions (ESB, TIMA) are initialized with a host
MMIO backend or a QEMU emulated backend. This results in a complex
initialization sequence partially done at realize and later at reset,
and some memory region leaks.

To simplify this sequence and to remove of the late initialization of
the emulated device which is required to be done only once, we
introduce new memory regions specific for KVM. These regions are
mapped as overlaps on top of the emulated device to make use of the
host MMIOs. Also provide proper cleanups of these regions when the
XIVE KVM device is destroyed to fix the leaks.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190614165920.12670-2-clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-02 09:43:58 +10:00
Greg Kurz a2166410ad spapr_pci: Unregister listeners before destroying the IOMMU address space
Hot-unplugging a PHB with a VFIO device connected to it crashes QEMU:

-device spapr-pci-host-bridge,index=1,id=phb1 \
-device vfio-pci,host=0034:01:00.3,id=vfio0

(qemu) device_del phb1
[  357.207183] iommu: Removing device 0001:00:00.0 from group 1
[  360.375523] rpadlpar_io: slot PHB 1 removed
qemu-system-ppc64: memory.c:2742:
 do_address_space_destroy: Assertion `QTAILQ_EMPTY(&as->listeners)' failed.

'as' is the IOMMU address space, which indeed has a listener registered
to by vfio_connect_container() when the VFIO device is realized. This
listener is supposed to be unregistered by vfio_disconnect_container()
when the VFIO device is finalized. Unfortunately, the VFIO device hasn't
reached finalize yet at the time the PHB unrealize function is called,
and address_space_destroy() gets called with the VFIO listener still
being registered.

All regions have just been unmapped from the address space. Listeners
aren't needed anymore at this point. Remove them before destroying the
address space.

The VFIO code will try to remove them _again_ at device finalize,
but it is okay since memory_listener_unregister() is idempotent.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156110925375.92514.11649846071216864570.stgit@bahia.lan>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[dwg: Correct spelling error pointed out by aik]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-02 09:43:58 +10:00
Greg Kurz 330a21e3c4 xics/kvm: Add error propagation to ic*_set_kvm_state() functions
This allows errors happening there to be propagated up to spapr_irq,
just like XIVE already does.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156077921763.433243.4614327010172954196.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-02 09:43:58 +10:00
Greg Kurz eab9f191a0 xics/spapr: Rename xics_kvm_init()
Switch to using the connect/disconnect terminology like we already do for
XIVE.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156077920102.433243.6605099291134598170.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-02 09:43:58 +10:00
Greg Kurz 2fb4c6528e xics/spapr: Drop unused function declaration
Commit 9fb6eb7ca50c added the declaration of xics_spapr_connect(), which
has no implementation and no users.

This is a leftover from a previous iteration of this patch. Drop it.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156077919546.433243.8748677531446035746.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-02 09:43:58 +10:00
Greg Kurz 7abc0c6d35 xics/spapr: Detect old KVM XICS on POWER9 hosts
Older KVMs on POWER9 don't support destroying/recreating a KVM XICS
device, which is required by 'dual' interrupt controller mode. This
causes QEMU to emit a warning when the guest is rebooted and to fall
back on XICS emulation:

qemu-system-ppc64: warning: kernel_irqchip allowed but unavailable:
 Error on KVM_CREATE_DEVICE for XICS: File exists

If kernel irqchip is required, QEMU will thus exit when the guest is
first rebooted. Failing QEMU this late may be a painful experience
for the user.

Detect that and exit at machine init instead.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156044430517.125694.6207865998817342638.stgit@bahia.lab.toulouse-stg.fr.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-02 09:43:58 +10:00
Greg Kurz d9293c4843 xics/spapr: Register RTAS/hypercalls once at machine init
QEMU may crash when running a spapr machine in 'dual' interrupt controller
mode on some older (but not that old, eg. ubuntu 18.04.2) KVMs with partial
XIVE support:

qemu-system-ppc64: hw/ppc/spapr_rtas.c:411: spapr_rtas_register:
 Assertion `!name || !rtas_table[token].name' failed.

XICS is controlled by the guest thanks to a set of RTAS calls. Depending
on whether KVM XICS is used or not, the RTAS calls are handled by KVM or
QEMU. In both cases, QEMU needs to expose the RTAS calls to the guest
through the "rtas" node of the device tree.

The spapr_rtas_register() helper takes care of all of that: it adds the
RTAS call token to the "rtas" node and registers a QEMU callback to be
invoked when the guest issues the RTAS call. In the KVM XICS case, QEMU
registers a dummy callback that just prints an error since it isn't
supposed to be invoked, ever.

Historically, the XICS controller was setup during machine init and
released during final teardown. This changed when the 'dual' interrupt
controller mode was added to the spapr machine: in this case we need
to tear the XICS down and set it up again during machine reset. The
crash happens because we indeed have an incompatibility with older
KVMs that forces QEMU to fallback on emulated XICS, which tries to
re-registers the same RTAS calls.

This could be fixed by adding proper rollback that would unregister
RTAS calls on error. But since the emulated RTAS calls in QEMU can
now detect when they are mistakenly called while KVM XICS is in
use, it seems simpler to register them once and for all at machine
init. This fixes the crash and allows to remove some now useless
lines of code.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156044429963.125694.13710679451927268758.stgit@bahia.lab.toulouse-stg.fr.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-02 09:43:58 +10:00
Cédric Le Goater c29a0b0fb3 ppc/pnv: remove xscom_base field from PnvChip
It has now became useless with the previous patch.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190612174345.9799-3-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-02 09:43:58 +10:00
Cédric Le Goater 709044fd2d ppc/pnv: fix XSCOM MMIO base address for P9 machines with multiple chips
The PNV_XSCOM_BASE and PNV_XSCOM_SIZE macros are specific to POWER8
and they are used when the device tree is populated and the MMIO
region created, even for POWER9 chips. This is not too much of a
problem today because we don't have important devices on the second
chip, but we might have oneday (PHBs).

Fix by using the appropriate macros in case of P9.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190612174345.9799-2-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-02 09:43:58 +10:00
Peter Maydell 0094908375 vga: ati fixes, add ati vgabios.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJdFe5kAAoJEEy22O7T6HE45qQP/37tN/q9FAjfvwu26zbbhcYd
 V0wchXmnKcZ6mszPKtoYnXJV3poQj8aNQGVb3/vMB+3+ENVbrH1J6G7fxxGiZyNc
 owG4JmMy2OmLdPzSeEwnPafOg8m5UPPgXQwuuCNseUFigcx+3zjB8LPY2jW23DGl
 Jxhd8hvxaozZXbUzi7NA5dcoAq11cG6tz5D6DS5pCtbSj/puYF6Zz12o82E0Poaw
 /sxCAwfhVVWNHXrw10Az3TmZUV9JKyc3XkMIy74P/cD4UhJwXCbzdbSZiIwB3ASD
 psm2QPoEp4/kl2xpitycvHI9eWKojEGN/m093UZiPv6rMVzGDNr97ntRsAtXl0VS
 Gf/sU/5JR9yg8ZmxCKE//Z2r8KPWybqdMhfpxt5JGhd2MA3eHUXo4a3IezXxHkQB
 EJrJK+DV42tp6DMH4iMrnJZPET0DWUVdvbAZc+l8HFmMZBeOMXUFfGUNLQaEn3jC
 bUrPGgtt2G80Ltl4usMSGcAwAo9CrES3egh8InENsZi1VrbBVb+7VXN0g1v+1IIf
 IE12q730HWDwfWcbCAmM3s92ISujRQriCsW+NhW5xMc5a0bACXIoHy7zmw7X/ep7
 N0uyv04c3PsPPH5Kou2IcdhVILT5u4ynT2KVCtYo6ip5/DZTpNhvrrVF93vNkbqe
 XrfF5WwTa8iuaDImdq/T
 =8o+H
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20190628-pull-request' into staging

vga: ati fixes, add ati vgabios.

# gpg: Signature made Fri 28 Jun 2019 11:39:32 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20190628-pull-request:
  ati-vga: switch to vgabios-ati.bin
  seabios: add ati vgabios binary
  seabios: add config for ati vgabios
  ati-vga: Fixes to offset and pitch registers
  ati-vga: Implement DDC and EDID info from monitor
  i2c: Move bitbang_i2c.h to include/hw/i2c/

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01 19:11:53 +01:00
Joel Stanley 3059c2f5a8 aspeed: Link SCU to the watchdog
The ast2500 uses the watchdog to reset the SDRAM controller. This
operation is usually performed by u-boot's memory training procedure,
and it is enabled by setting a bit in the SCU and then causing the
watchdog to expire. Therefore, we need the watchdog to be able to
access the SCU's register space.

This causes the watchdog to not perform a system reset when the bit is
set. In the future it could perform a reset of the SDMC model.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190621065242.32535-1-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01 17:29:00 +01:00
Eddie James 118c82e7ff hw/misc/aspeed_xdma: New device
The XDMA engine embedded in the Aspeed SOCs performs PCI DMA operations
between the SOC (acting as a BMC) and a host processor in a server.

The XDMA engine exists on the AST2400, AST2500, and AST2600 SOCs, so
enable it for all of those. Add trace events on the important register
writes in the XDMA engine.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20190618165311.27066-21-clg@kaod.org
[clg: - changed title ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01 17:29:00 +01:00
Cédric Le Goater 6da4433fc5 aspeed/smc: add a 'sdram_base' property
The DRAM address of a DMA transaction depends on the DRAM base address
of the SoC. Inform the SMC controller model with this value.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190618165311.27066-15-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01 17:28:59 +01:00
Cédric Le Goater 6734099048 aspeed: add support for multiple NICs
The Aspeed SoCs have two MACs. Extend the Aspeed model to support a
second NIC.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20190618165311.27066-7-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01 17:28:59 +01:00
Cédric Le Goater ece09beec4 aspeed: introduce a configurable number of CPU per machine
The current models of the Aspeed SoCs only have one CPU but future
ones will support SMP. Introduce a new num_cpus field at the SoC class
level to define the number of available CPUs per SoC and also
introduce a 'num-cpus' property to activate the CPUs configured for
the machine.

The max_cpus limit of the machine should depend on the SoC definition
but, unfortunately, these values are not available when the machine
class is initialized. This is the reason why we add a check on
num_cpus in the AspeedSoC realize handler.

SMP support will be activated when models for such SoCs are implemented.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20190618165311.27066-6-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01 17:28:59 +01:00
Joel Stanley 75fb4577fc hw/arm/aspeed: Add RTC to SoC
All systems have an RTC.

The IRQ is hooked up but the model does not use it at this stage. There
is no guest code that uses it, so this limitation is acceptable.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190618165311.27066-5-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01 17:28:59 +01:00
Joel Stanley 979672cf51 hw: timer: Add ASPEED RTC device
The RTC is modeled to provide time and date functionality. It is
initialised at zero to match the hardware.

There is no modelling of the alarm functionality, which includes the IRQ
line. As there is no guest code to exercise this function that is
acceptable for now.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190618165311.27066-4-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01 17:28:59 +01:00
Cédric Le Goater d783d1fe58 aspeed: add a per SoC mapping for the memory space
This will simplify the definition of new SoCs, like the AST2600 which
should use a slightly different address space and have a different set
of controllers.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20190618165311.27066-3-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01 17:28:59 +01:00
Cédric Le Goater b456b1132e aspeed: add a per SoC mapping for the interrupt space
This will simplify the definition of new SoCs, like the AST2600 which
should use a different CPU and a different IRQ number layout.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20190618165311.27066-2-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01 17:28:59 +01:00
Andrey Smirnov 01b96ec8c4 i.mx7d: pci: Update PCI IRQ mapping to match HW
Datasheet for i.MX7 is incorrect and i.MX7's PCI IRQ mapping matches
that of i.MX6:

    * INTD/MSI    122
    * INTC        123
    * INTB        124
    * INTA        125

Fix all of the relevant code to reflect that fact. Needed by latest
Linux kernels.

(Reference: Linux kernel commit 538d6e9d597584e80 from an
NXP employee confirming that the datasheet is incorrect and
with a report of a test against hardware.)

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added ref to kernel commit confirming the datasheet error]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01 17:28:59 +01:00
Andrey Smirnov 6ee51e961e i.mx7d: Add no-op/unimplemented PCIE PHY IP block
Add no-op/unimplemented PCIE PHY IP block. Needed by new kernels to
use PCIE.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01 17:28:59 +01:00
Andrey Smirnov f0d877dc5e i.mx7d: Add no-op/unimplemented APBH DMA module
Instantiate no-op APBH DMA module. Needed to boot latest Linux kernel.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01 17:28:59 +01:00
Michael S. Tsirkin d85d65cc29 pcie: minor cleanups for slot control/status
Rename function arguments to make intent clearer.
Better documentation for slot control logic.

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2019-07-01 09:17:30 -04:00
Michael S. Tsirkin 2841ab435b pcie: check that slt ctrl changed before deleting
During boot, linux would sometimes overwrites control of a powered off
slot before powering it on. Unfortunately QEMU interprets that as a
power off request and ejects the device.

For example:

/x86_64-softmmu/qemu-system-x86_64 -enable-kvm -S -machine q35  \
    -device pcie-root-port,id=pcie_root_port_0,slot=2,chassis=2,addr=0x2,bus=pcie.0 \
    -monitor stdio disk.qcow2
(qemu)device_add virtio-balloon-pci,id=balloon,bus=pcie_root_port_0
(qemu)cont

Balloon is deleted during guest boot.

To fix, save control beforehand and check that power
or led state actually change before ejecting.

Note: this is more a hack than a solution, ideally we'd
find a better way to detect ejects, or move away
from ejects completely and instead monitor whether
it's safe to delete device due to e.g. its power state.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
2019-07-01 09:17:30 -04:00
BALATON Zoltan d718b7475b i2c: Move bitbang_i2c.h to include/hw/i2c/
The bitbang i2c implementation is also useful for other device models
such as DDC in display controllers. Move the header to include/hw/i2c/
to allow it to be used from other device models and adjust users of
this include. This also reverts commit 2b4c1125ac which is no longer
needed.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-id: 5d1fe4db846ab9be4b77ddb0d43cc74cd200a003.1561028123.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-06-28 10:49:36 +02:00
Alistair Francis b30422231b
hw/riscv: Add support for loading a firmware
Add support for loading a firmware file for the virt machine and the
SiFive U. This can be run with the following command:

    qemu-system-riscv64 -machine virt -bios fw_jump.bin -kernel vmlinux

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-06-27 02:47:06 -07:00
Alistair Francis 0ac24d56c5
hw/riscv: Split out the boot functions
Split the common RISC-V boot functions into a seperate file. This allows
us to share the common code.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-06-27 02:47:06 -07:00
Cornelia Huck 8fadea24de vfio-ccw: support async command subregion
A vfio-ccw device may provide an async command subregion for
issuing halt/clear subchannel requests. If it is present, use
it for sending halt/clear request to the device; if not, fall
back to emulation (as done today).

Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <20190613092542.2834-1-cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-06-24 17:27:57 +02:00
Anthony PERARD a3434a2d56 xen: Import other xen/io/*.h
A Xen public header have been imported into QEMU (by
f65eadb639 "xen: import ring.h from xen"), but there are other header
that depends on ring.h which come from the system when building QEMU.

This patch resolves the issue of having headers from the system
importing a different copie of ring.h.

This patch is prompt by the build issue described in the previous
patch: 'Revert xen/io/ring.h of "Clean up a few header guard symbols"'

ring.h and the new imported headers are moved to
"include/hw/xen/interface" as those describe interfaces with a guest.

The imported headers are cleaned up a bit while importing them: some
part of the file that QEMU doesn't use are removed (description
of how to make hypercall in grant_table.h have been removed).

Other cleanup:
- xen-mapcache.c and xen-legacy-backend.c don't need grant_table.h.
- xenfb.c doesn't need event_channel.h.

Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Message-Id: <20190621105441.3025-3-anthony.perard@citrix.com>
2019-06-24 10:42:30 +01:00
Anthony PERARD d1744bd321 Revert xen/io/ring.h of "Clean up a few header guard symbols"
This reverts changes to include/hw/xen/io/ring.h from commit
37677d7db3.

Following 37677d7db3 "Clean up a few header guard symbols", QEMU start
to fail to build:

In file included from ~/xen/tools/../tools/include/xen/io/blkif.h:31:0,
                 from ~/xen/tools/qemu-xen-dir/hw/block/xen_blkif.h:5,
                 from ~/xen/tools/qemu-xen-dir/hw/block/xen-block.c:22:
~/xen/tools/../tools/include/xen/io/ring.h:68:0: error: "__CONST_RING_SIZE" redefined [-Werror]
 #define __CONST_RING_SIZE(_s, _sz) \

In file included from ~/xen/tools/qemu-xen-dir/hw/block/xen_blkif.h:4:0,
                 from ~/xen/tools/qemu-xen-dir/hw/block/xen-block.c:22:
~/xen/tools/qemu-xen-dir/include/hw/xen/io/ring.h:66:0: note: this is the location of the previous definition
 #define __CONST_RING_SIZE(_s, _sz) \

The issue is that some public xen headers have been imported (by
f65eadb639 "xen: import ring.h from xen") but not all. With the change
in the guards symbole, the ring.h header start to be imported twice.

Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Message-Id: <20190621105441.3025-2-anthony.perard@citrix.com>
2019-06-24 10:42:30 +01:00
Paul Durrant 345f42b4be xen-bus / xen-block: add support for event channel polling
This patch introduces a poll callback for event channel fd-s and uses
this to invoke the channel callback function.

To properly support polling, it is necessary for the event channel callback
function to return a boolean saying whether it has done any useful work or
not. Thus xen_block_dataplane_event() is modified to directly invoke
xen_block_handle_requests() and the latter only returns true if it actually
processes any requests. This also means that the call to qemu_bh_schedule()
is moved into xen_block_complete_aio(), which is more intuitive since the
only reason for doing a deferred poll of the shared ring should be because
there were previously insufficient resources to fully complete a previous
poll.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20190408151617.13025-4-paul.durrant@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-06-24 10:42:29 +01:00
Paul Durrant 83361a8a1f xen-bus: allow AioContext to be specified for each event channel
This patch adds an AioContext parameter to xen_device_bind_event_channel()
and then uses aio_set_fd_handler() to set the callback rather than
qemu_set_fd_handler().

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20190408151617.13025-3-paul.durrant@citrix.com>
[Call aio_set_fd_handler() with is_external=true]
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-06-24 10:42:29 +01:00
Paul Durrant c0b336ea19 xen-bus: use a separate fd for each event channel
To better support use of IOThread-s it will be necessary to be able to set
the AioContext for each XenEventChannel and hence it is necessary to open a
separate handle to libxenevtchan for each channel.

This patch stops using NotifierList for event channel callbacks, replacing
that construct by a list of complete XenEventChannel structures. Each of
these now has a xenevtchn_handle pointer in place of the single pointer
previously held in the XenDevice structure. The individual handles are
opened/closed in xen_device_bind/unbind_event_channel(), replacing the
single open/close in xen_device_realize/unrealize().

NOTE: This patch does not add an AioContext parameter to
      xen_device_bind_event_channel(). That will be done in a subsequent
      patch.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20190408151617.13025-2-paul.durrant@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-06-24 10:42:29 +01:00
Palmer Dabbelt c988de4119
RISC-V: Fix a memory leak when realizing a sifive_e
Coverity pointed out a memory leak in riscv_sifive_e_soc_realize(),
where a pair of recently added MemoryRegion instances would not be freed
if there were errors elsewhere in the function.  The fix here is to
simply not use dynamic allocation for these instances: there's always
one of each in SiFiveESoCState, so instead we just include them within
the struct.

Fixes: 30efbf330a ("SiFive RISC-V GPIO Device")
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2019-06-23 23:44:42 -07:00
Nathaniel Graff b9d1848ebe
sifive_prci: Read and write PRCI registers
Writes to the SiFive PRCI registers are preserved while leaving the
ready bits set for the HFX/HFR oscillators and the lock bit set for the
PLL.

Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-06-23 23:44:41 -07:00
Greg Kurz 8e8cbed09a hw: Nuke hw_compat_4_0_1 and pc_compat_4_0_1
Commit c87759ce87 fixed a regression affecting pc-q35 machines by
introducing a new pc-q35-4.0.1 machine version to be used instead
of pc-q35-4.0. The only purpose was to revert the default behaviour
of not using split irqchip, but the change also introduced the usual
hw_compat and pc_compat bits, and wired them for pc-q35 only.

This raises questions when it comes to add new compat properties for
4.0* machine versions of any architecture. Where to add them ? In
4.0, 4.0.1 or both ? Error prone. Another possibility would be to teach
all other architectures about 4.0.1. This solution isn't satisfying,
especially since this is a pc-q35 specific issue.

It turns out that the split irqchip default is handled in the machine
option function and doesn't involve compat lists at all.

Drop all the 4.0.1 compat lists and use the 4.0 ones instead in the 4.0.1
machine option function.

Move the compat props that were added to the 4.0.1 since c87759ce87 to
4.0.

Even if only hw_compat_4_0_1 had an impact on other architectures,
drop pc_compat_4_0_1 as well for consistency.

Fixes: c87759ce87 "q35: Revert to kernel irqchip"
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <156051774276.244890.8660277280145466396.stgit@bahia.lan>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-21 13:25:29 +02:00
Liran Alon ebbfef2f34 target/i386: kvm: Add support for save and restore nested state
Kernel commit 8fcc4b5923af ("kvm: nVMX: Introduce KVM_CAP_NESTED_STATE")
introduced new IOCTLs to extract and restore vCPU state related to
Intel VMX & AMD SVM.

Utilize these IOCTLs to add support for migration of VMs which are
running nested hypervisors.

Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Tested-by: Maran Wilson <maran.wilson@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20190619162140.133674-9-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-21 13:23:47 +02:00
Liran Alon 6cfd763932 vmstate: Add support for kernel integer types
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190619162140.133674-8-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-21 13:23:47 +02:00
Liran Alon b1115c9991 KVM: Introduce kvm_arch_destroy_vcpu()
Simiar to how kvm_init_vcpu() calls kvm_arch_init_vcpu() to perform
arch-dependent initialisation, introduce kvm_arch_destroy_vcpu()
to be called from kvm_destroy_vcpu() to perform arch-dependent
destruction.

This was added because some architectures (Such as i386)
currently do not free memory that it have allocated in
kvm_arch_init_vcpu().

Suggested-by: Maran Wilson <maran.wilson@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20190619162140.133674-3-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-21 02:29:39 +02:00
Max Reitz c1087f1206 block: Add bdrv_child_refresh_perms()
If a block node uses bdrv_child_try_set_perm() to change the permission
it takes on its child, the result may be very short-lived.  If anything
makes the block layer recalculate the permissions internally, it will
invoke the node driver's .bdrv_child_perm() implementation.  The
permission/shared permissions masks that returns will then override the
values previously passed to bdrv_child_try_set_perm().

If drivers want a child edge to have specific values for the
permissions/shared permissions mask, it must return them in
.bdrv_child_perm().  Consequentially, there is no need for them to pass
the same values to bdrv_child_try_set_perm() then: It is better to have
a function that invokes .bdrv_child_perm() and calls
bdrv_child_try_set_perm() with the result.  This patch adds such a
function under the name of bdrv_child_refresh_perms().

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-18 16:41:10 +02:00
Vladimir Sementsov-Ogievskiy b23c580c94 block: drop bs->job
Drop remaining users of bs->job:
1. assertions actually duplicated by assert(!bs->refcnt)
2. trace-point seems not enough reason to change stream_start to return
   BlockJob pointer
3. Restricting creation of two jobs based on same bs is bad idea, as
   3.1 Some jobs creates filters to be their main node, so, this check
   don't actually prevent creating second job on same real node (which
   will create another filter node) (but I hope it is restricted by
   other mechanisms)
   3.2 Even without bs->job we have two systems of permissions:
   op-blockers and BLK_PERM
   3.3 We may want to run several jobs on one node one day

And finally, drop bs->job pointer itself. Hurrah!

Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-18 16:41:10 +02:00
Vladimir Sementsov-Ogievskiy 8164102ffe blockdev: blockdev_mark_auto_del: drop usage of bs->job
We are going to remove bs->job pointer. Drop it's usage in
blockdev_mark_auto_del: instead of looking at bs->job let's check all
jobs for references to bs.

Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-18 16:41:10 +02:00
Vladimir Sementsov-Ogievskiy cc19f1773d block/replication: drop usage of bs->job
We are going to remove bs->job pointer. Drop it's usage in replication
code. Additionally we have to return job pointer from some mirror APIs.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-18 16:41:09 +02:00
Kevin Wolf fbfc29e3bf monitor: Replace monitor_init() with monitor_init_{hmp, qmp}()
Most callers know which monitor type they want to have. Instead of
calling monitor_init() with flags that can describe both types of
monitors, make monitor_init_{hmp,qmp}() public interfaces that take
specific bools instead of flags and call these functions directly.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190613153405.24769-15-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-06-18 08:14:17 +02:00
Kevin Wolf 1d95db745b monitor: Split out monitor/monitor.c
Move the monitor core infrastructure from monitor/misc.c to
monitor/monitor.c. This is code that can be shared for all targets, so
compile it only once.

What remains in monitor/misc.c after this patch is mostly monitor
command implementations (which could move to hmp-cmds.c or qmp-cmds.c
later) and code that requires a system emulator or is even
target-dependent (including HMP command completion code).

The amount of function and particularly extern variables in
monitor_int.h is probably a bit larger than it needs to be, but this way
no non-trivial code modifications are needed. The interfaces between all
monitor parts can be cleaned up later.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190613153405.24769-13-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Superfluous #include dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-06-18 08:14:17 +02:00
Kevin Wolf 5f9dba1600 monitor: Create MonitorHMP with readline state
The ReadLineState in Monitor is only used for HMP monitors. Create
MonitorHMP and move it there.

Can't use container_of() in hmp_change().  Cast instead, and mark
FIXME.  Will be cleaned up shortly.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190613153405.24769-5-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Superfluous variable in monitor_data_destroy() eliminated, whitespace
tweaked in hmp_change(), commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-06-17 20:36:56 +02:00
Yury Kotov 854f63d440 monitor: Fix return type of monitor_fdset_dup_fd_find
monitor_fdset_dup_fd_find_remove() and monitor_fdset_dup_fd_find()
return mon_fdset->id which is int64_t. Downcasting from int64_t to int
leads to a bug with removing fd from fdset with id >= 2^32.
So, fix return types for these function.

Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523094433.30297-1-yury-kotov@yandex-team.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-06-17 20:36:56 +02:00
Peter Maydell a90a862b9e hw/arm: Correctly disable FPU/DSP for some ARMSSE-based boards
The SSE-200 hardware has configurable integration settings which
determine whether its two CPUs have the FPU and DSP:
 * CPU0_FPU (default 0)
 * CPU0_DSP (default 0)
 * CPU1_FPU (default 1)
 * CPU1_DSP (default 1)

Similarly, the IoTKit has settings for its single CPU:
 * CPU0_FPU (default 1)
 * CPU0_DSP (default 1)

Of our four boards that use either the IoTKit or the SSE-200:
 * mps2-an505, mps2-an521 and musca-a use the default settings
 * musca-b1 enables FPU and DSP on both CPUs

Currently QEMU models all these boards using CPUs with
both FPU and DSP enabled. This means that we are incorrect
for mps2-an521 and musca-a, which should not have FPU or DSP
on CPU0.

Create QOM properties on the ARMSSE devices corresponding to the
default h/w integration settings, and make the Musca-B1 board
enable FPU and DSP on both CPUs. This fixes the mps2-an521
and musca-a behaviour, and leaves the musca-b1 and mps2-an505
behaviour unchanged.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190517174046.11146-5-peter.maydell@linaro.org
2019-06-17 15:12:25 +01:00
Peter Maydell e0cf7b8163 hw/arm/armv7m: Forward "vfp" and "dsp" properties to CPU
Create "vfp" and "dsp" properties on the armv7m container object
which will be forwarded to its CPU object, so that SoCs can
configure whether the CPU has these features.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190517174046.11146-4-peter.maydell@linaro.org
2019-06-17 15:12:25 +01:00
Wei Yang 82f76c6702 hw/acpi: extract acpi_add_rom_blob()
arm and i386 has almost the same function acpi_add_rom_blob(), except
giving different FWCfgCallback function.

This patch moves acpi_add_rom_blob() to utils.c by passing
FWCfgCallback to it.

Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>

v7:
  * rebase on top of current master because of conflict
v6:
  * change author from Igor to Michael
v5:
  * remove unnecessary header glib/gprintf.h
  * rearrange include header to make it more suitable
v4:
  * extract -> moves
  * adjust comment in source to make checkpatch happy
v3:
  * put acpi_add_rom_blob() to hw/acpi/utils.c
v2:
  * remove unused header in original source file
Message-Id: <20190610011830.28398-1-richardw.yang@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-06-16 16:16:52 -04:00
Eric Auger 201a733145 vfio/common: Introduce vfio_set_irq_signaling helper
The code used to assign an interrupt index/subindex to an
eventfd is duplicated many times. Let's introduce an helper that
allows to set/unset the signaling for an ACTION_TRIGGER,
ACTION_MASK or ACTION_UNMASK action.

In the error message, we now use errno in case of any
VFIO_DEVICE_SET_IRQS ioctl failure.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-06-13 09:57:37 -06:00
Peter Maydell 785a602eae edid: add xmax + ymax properties, enable by default.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJdAf1qAAoJEEy22O7T6HE4WQoP/jTzmZ80hSYl1cud2gOeB0PK
 8pfYHNxjLzQZ51qnnm3V70GVDq68GszFixskVKVkGof7eQxxzmwQVsrK7m9o2niy
 RvKruJ6mwfFz3uF6DLZmN+752RXwhLC+uM8hyqaN7Va9aLmuo3/jSt+zgIGqN19E
 tRGPuxMOfj5nHJabn+2oG25XqnLvmfY1oE6AKgPUOfI4Db1EVTE4haN6GqncyTKG
 zcfRrCtj5W8ziXu+Go0KyXHr1qH1C5EGX3rLOYWBe2jzFgpaG+5jT8c9VAXlAvFI
 rolRRldLaXVbZHK7A3ybCTGloWZ3V4XcH5XQ9e7kRM0u/kwtgmClmCjT5MVP9ehM
 IsYyHSo7I+YkFpFruk9xEP7Jkfy9cOxibyS3p4vmRGB62g8XtSboMc7jH8fMV5UJ
 m1Nuvb4NgLA3LqhBm2cDzWzC7Q7iPMPPMGV/iiOYoLCnlUZYdlISqfapiHs1JDBA
 D2dDtBMrO/46xFq8q/7+G0bZLztS5PmfoUeskEoxJAiZ/K5G7jlwZwQm0LI/pV58
 5e0H7VK/3yP8FlsEEHjNSHFL7p8wmWpNz0uFNYotCnGYm4bWAzDtysgMmXWjw5WA
 7Gwqfj+veRH/mRdtuvDhOdFQvNy3X4Wt8neU02dDFZ7TigEnguhxJ9AOfAqMyDQ4
 MJeGGrrqhb9E7f3AMYiA
 =P+g9
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20190613-pull-request' into staging

edid: add xmax + ymax properties, enable by default.

# gpg: Signature made Thu 13 Jun 2019 08:38:18 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20190613-pull-request:
  edid: flip the default to enabled
  edid: add xmax + ymax properties

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-06-13 13:25:25 +01:00
Gerd Hoffmann 0a71966253 edid: flip the default to enabled
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20190607083444.32175-1-kraxel@redhat.com
2019-06-13 09:34:50 +02:00
Gerd Hoffmann 9b330e482f edid: add xmax + ymax properties
Add new properties to allow setting the maximum display resolution.
Resolutions larger than that will not be included in the mode list.
In linux guests xrandr can be used to list modes.

Note: The existing xres and yres properties set the preferred display
resolution, i.e. the mode should be first in the mode list and guests
should use it by default.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190607083429.31943-1-kraxel@redhat.com
2019-06-13 09:34:38 +02:00
Alex Bennée 78e24848f6 semihosting: split console_out into string and char versions
This is ostensibly to avoid the weirdness of len looking like it might
come from a guest and sometimes being used. While we are at it fix up
the error checking for the arm-linux-user implementation of the API
which got flagged up by Coverity (CID 1401700).

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-12 17:53:22 +01:00
Peter Maydell a050901d4b ppc patch queue 2019-06-12
Next pull request against qemu-4.1.  The big thing here is adding
 support for hot plug of P2P bridges, and PCI devices under P2P bridges
 on the "pseries" machine (which doesn't use SHPC).  Other than that
 there's just a handful of fixes and small enhancements.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEdfRlhq5hpmzETofcbDjKyiDZs5IFAl0AkgwACgkQbDjKyiDZ
 s5Jyug//cwxP+t1t2CNHtffKwiXFzuEKx9YSNE1V0wog6aB40EbPKU72FzCq6FfA
 lev+pZWV9AwVMzFYe4VM/7Lqh7WFMYDT3DOXaZwfANs4471vYtgvPi21L2TBj80d
 hMszlyLWMLY9ByOzCxIq3xnbivGpA94G2q9rKbwXdK4T/5i62Pe3SIfgG+gXiiwW
 +YlHWCPX0I1cJz2bBs9ElXdl7ONWnn+7uDf7gNfWkTKuiUq6Ps7mxzy3GhJ1T7nz
 OFKmQ5dKzLJsgOULSSun8kWpXBmnPffkM3+fCE07edrWZVor09fMCk4HvtfaRy2K
 FFa2Kvzn/V/70TL+44dsSX4QcwdcHQztiaMO7UGPq9CMswx5L7gsNmfX6zvK1Nrb
 1t7ORZKNJ72hMyvDPSMiGU2DpVjO3ZbBlSL4/xG8Qeal4An0kgkN5NcFlB/XEfnz
 dsKu9XzuGSeD1bWz1Mgcf1x7lPDBoHIKLcX6notZ8epP/otu4ywNFvAkPu4fk8s0
 4jQGajIT7328SmzpjXClsmiEskpKsEr7hQjPRhu0hFGrhVc+i9PjkmbDl0TYRAf6
 N6k6gJQAi+StJde2rcua1iS7Ra+Tka6QRKy+EctLqfqOKPb2VmkZ6fswQ3nfRRlT
 LgcTHt2iJcLeud2klVXs1e4pKXzXchkVyFL4ucvmyYG5VeimMzU=
 =ERgu
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190612' into staging

ppc patch queue 2019-06-12

Next pull request against qemu-4.1.  The big thing here is adding
support for hot plug of P2P bridges, and PCI devices under P2P bridges
on the "pseries" machine (which doesn't use SHPC).  Other than that
there's just a handful of fixes and small enhancements.

# gpg: Signature made Wed 12 Jun 2019 06:47:56 BST
# gpg:                using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-4.1-20190612:
  ppc/xive: Make XIVE generate the proper interrupt types
  ppc/pnv: activate the "dumpdtb" option on the powernv machine
  target/ppc: Use tcg_gen_gvec_bitsel
  spapr: Allow hot plug/unplug of PCI bridges and devices under PCI bridges
  spapr: Direct all PCI hotplug to host bridge, rather than P2P bridge
  spapr: Don't use bus number for building DRC ids
  spapr: Clean up DRC index construction
  spapr: Clean up spapr_drc_populate_dt()
  spapr: Clean up dt creation for PCI buses
  spapr: Clean up device tree construction for PCI devices
  spapr: Clean up device node name generation for PCI devices
  target/ppc: Fix lxvw4x, lxvh8x and lxvb16x
  spapr_pci: Improve error message

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-06-12 14:43:47 +01:00
Markus Armbruster f91005e195 Supply missing header guards
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190604181618.19980-5-armbru@redhat.com>
2019-06-12 13:20:21 +02:00
Markus Armbruster 37677d7db3 Clean up a few header guard symbols
Commit 58ea30f514 "Clean up header guards that don't match their file
name" messed up contrib/elf2dmp/qemu_elf.h and
tests/migration/migration-test.h.

It missed target/cris/opcode-cris.h and
tests/uefi-test-tools/UefiTestToolsPkg/Include/Guid/BiosTablesTest.h
due to the scripts/clean-header-guards.pl bug fixed in the previous
commit.

Commit a8b991b52d "Clean up ill-advised or unusual header guards"
missed include/hw/xen/io/ring.h for the same reason.

Commit 3979fca4b6 "disas: Rename include/disas/bfd.h back to
include/disas/dis-asm.h" neglected to update the guard symbol for the
rename.

Commit a331c6d774 "semihosting: implement a semihosting console"
created include/hw/semihosting/console.h with an ill-advised guard
symbol.

Clean them up.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190604181618.19980-4-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-06-12 13:20:20 +02:00
Markus Armbruster 0553d895f9 Normalize position of header guard
This is the common header guard idiom:

    /*
     * File comment
     */

    #ifndef GUARD_SYMBOL_H
    #define GUARD_SYMBOL_H

    ... actual contents ...

    #endif

A few of our headers have some #include before the guard.
target/tilegx/spr_def_64.h has #ifndef __DOXYGEN__ outside the guard.
A few more have the #define elsewhere.

Change them to match the common idiom.  For spr_def_64.h, that means
dropping #ifndef __DOXYGEN__.  While there, rename guard symbols to
make scripts/clean-header-guards.pl happy.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190604181618.19980-2-armbru@redhat.com>
[Rebased with conflicts resolved automatically]
2019-06-12 13:20:20 +02:00
Markus Armbruster a8d2532645 Include qemu-common.h exactly where needed
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
2019-06-12 13:20:20 +02:00
Markus Armbruster 0b8fa32f55 Include qemu/module.h where needed, drop it from qemu-common.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c
hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c;
ui/cocoa.m fixed up]
2019-06-12 13:18:33 +02:00
Benjamin Herrenschmidt 4aca978654 ppc/xive: Make XIVE generate the proper interrupt types
It should be generic Hypervisor Virtualization interrupts for HV
directed rings and traditional External Interrupts for the OS directed
ring.

Don't generate anything for the user ring as it isn't actually
supported.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20190606174409.12502-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-06-12 10:41:50 +10:00
David Gibson 9e7d38e8a3 spapr: Clean up spapr_drc_populate_dt()
This makes some minor cleanups to spapr_drc_populate_dt(), renaming it to
the shorter and more idiomatic spapr_dt_drc() along the way.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
2019-06-12 10:41:49 +10:00
David Gibson 466e883185 spapr: Clean up dt creation for PCI buses
Device nodes for PCI bridges (both host and P2P) describe both the bridge
device itself and the bus hanging off it, handling of this is a bit of a
mess.

spapr_dt_pci_device() has a few things it only adds for non-bridges, but
always adds #address-cells and #size-cells which should only appear for
bridges.  But the walking down the subordinate PCI bus is done in one of
its callers spapr_populate_pci_devices_dt().  The PHB dt creation in
spapr_populate_pci_dt() open codes some similar logic to the bridge case.

This patch consolidates things in a bunch of ways:
 * Bus specific dt info is now created in spapr_dt_pci_bus() used for both
   P2P bridges and the host bridge.  This includes walking subordinate
   devices
 * spapr_dt_pci_device() now calls spapr_dt_pci_bus() when called on a
   P2P bridge
 * We do detection of bridges with the is_bridge field of the device class,
   rather than checking PCI config space directly, for consistency with
   qemu's core PCI code.
 * Several things are renamed for brevity and clarity

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
2019-06-12 10:41:49 +10:00
Markus Armbruster 856dfd8a03 qemu-common: Move qemu_isalnum() etc. to qemu/ctype.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-11 20:22:09 +02:00
Markus Armbruster 14a48c1d0d qemu-common: Move tcg_enabled() etc. to sysemu/tcg.h
Other accelerators have their own headers: sysemu/hax.h, sysemu/hvf.h,
sysemu/kvm.h, sysemu/whpx.h.  Only tcg_enabled() & friends sit in
qemu-common.h.  This necessitates inclusion of qemu-common.h into
headers, which is against the rules spelled out in qemu-common.h's
file comment.

Move tcg_enabled() & friends into their own header sysemu/tcg.h, and
adjust #include directives.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Rebased with conflicts resolved automatically, except for
accel/tcg/tcg-all.c]
2019-06-11 20:22:09 +02:00
Richard Henderson e8b5fae516 cpu: Remove CPU_COMMON
This macro is now always empty, so remove it.  This leaves the
entire contents of CPUArchState under the control of the guest
architecture.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:42 -07:00
Richard Henderson 269bd5d8f6 cpu: Move the softmmu tlb to CPUNegativeOffsetState
We have for some time had code within the tcg backends to
handle large positive offsets from env.  This move makes
sure that need not happen.  Indeed, we are able to assert
at build time that simple offsets suffice for all hosts.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:42 -07:00
Richard Henderson 5e1401969b cpu: Move icount_decr to CPUNegativeOffsetState
Amusingly, we had already ignored the comment to keep this value
at the end of CPUState.  This restores the minimum negative offset
from TCG_AREG0 for code generation.

For the couple of uses within qom/cpu.c, without NEED_CPU_H, add
a pointer from the CPUState object to the IcountDecr object within
CPUNegativeOffsetState.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:42 -07:00
Richard Henderson 5b146dc716 cpu: Introduce CPUNegativeOffsetState
Nothing in there so far, but all of the plumbing done
within the target ArchCPU state.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:42 -07:00
Richard Henderson 7506ed902e cpu: Introduce cpu_set_cpustate_pointers
Consolidate some boilerplate from foo_cpu_initfn.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:42 -07:00
Richard Henderson 677c4d69ac cpu: Move ENV_OFFSET to exec/gen-icount.h
Now that we have ArchCPU, we can define this generically,
in the one place that needs it.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:42 -07:00
Richard Henderson 083dc73d7a cpu: Introduce env_archcpu
This will replace foo_env_get_cpu with a generic definition.
No changes to the target specific code so far.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:34 -07:00
Richard Henderson 29a0af618d cpu: Replace ENV_GET_CPU with env_cpu
Now that we have both ArchCPU and CPUArchState, we can define
this generically instead of via macro in each target's cpu.h.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:34 -07:00
Richard Henderson a40ec84ee2 tcg: Create struct CPUTLB
Move all softmmu tlb data into this structure.  Arrange the
members so that we are able to place mask+table together and
at a smaller absolute offset from ENV.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:34 -07:00