If a device model
(a) doesn't set the value to a correct interrupt number and then
(b) triggers an interrupt for itself,
it's device model bug. Add assert on interrupt pin number to catch
this kind of bug more obviously.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <9cf8ac3b17e162daac0971d7be32deb6a33ae6ec.1616532563.git.isaku.yamahata@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 6be8cf56bc made sure that SCI is enabled in PM1.CNT
on reset in acpi_only mode by modifying acpi_pm1_cnt_reset() and
that worked for q35 as expected.
This patch adds reset ACPI PM related registers on vt82c686 reset time
and de-assert sci.
via_pm_realize() initializes acpi pm tmr, evt, cnt and gpe.
Reset them on device reset.
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <0a3fe998525552860919a690ce83dab8f663ab99.1616532563.git.isaku.yamahata@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 6be8cf56bc made sure that SCI is enabled in PM1.CNT
on reset in acpi_only mode by modifying acpi_pm1_cnt_reset() and
that worked for q35 as expected.
The function was introduced by commit
eaba51c573 (acpi, acpi_piix, vt82c686: factor out PM1_CNT logic)
that forgot to actually call it at piix4 reset time and as result
SCI_EN wasn't set as was expected by 6be8cf56bc in acpi_only mode.
So Windows crashes when it notices that SCI_EN is not set and FADT is
not providing information about how to enable it anymore.
Reproducer:
qemu-system-x86_64 -enable-kvm -M pc-i440fx-6.0,smm=off -cdrom any_windows_10x64.iso
Fix it by calling acpi_pm1_cnt_reset() at piix4 reset time.
Occasionally this patch adds reset acpi PM related registers on
piix4 reset time and de-assert sci.
piix4_pm_realize() initializes acpi pm tmr, evt, cnt and gpe.
Reset them on device reset. pm_reset() in ich9.c correctly calls
corresponding reset functions.
Fixes: 6be8cf56bc (acpi/core: always set SCI_EN when SMM isn't supported)
Reported-by: Reinoud Zandijk <reinoud@NetBSD.org>
Co-developed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <8a5bbd19727045ec863523830078dd4ca63f6a9a.1616532563.git.isaku.yamahata@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The value is assigned later in this procedure.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Message-Id: <20210315115937.14286-3-yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1743098
This commit completes the solution of segfault in hot unplug flow
(by commit ccec7e9603).
Added missing check for vdev in virtio_pci_isr_read.
Typical stack of crash:
virtio_pci_isr_read ../hw/virtio/virtio-pci.c:1365 with proxy-vdev = 0
memory_region_read_accessor at ../softmmu/memory.c:442
access_with_adjusted_size at ../softmmu/memory.c:552
memory_region_dispatch_read1 at ../softmmu/memory.c:1420
memory_region_dispatch_read at ../softmmu/memory.c:1449
flatview_read_continue at ../softmmu/physmem.c:2822
flatview_read at ../softmmu/physmem.c:2862
address_space_read_full at ../softmmu/physmem.c:2875
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Message-Id: <20210315115937.14286-2-yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Qemu crashes on shutdown if the chardev used by vhost-user-blk has been
finalized before the vhost-user-blk.
This happens with char-socket chardev operating in the listening mode (server).
The char-socket chardev emits "close" event at the end of finalizing when
its internal data is destroyed. This calls vhost-user-blk event handler
which in turn tries to manipulate with destroyed chardev by setting an empty
event handler for vhost-user-blk cleanup postponing.
This patch separates the shutdown case from the cleanup postponing removing
the need to set an event handler.
Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru>
Message-Id: <20210325151217.262793-4-den-plotnikov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 4bcad76f4c ("vhost-user-blk: delay vhost_user_blk_disconnect")
introduced postponing vhost_dev cleanup aiming to eliminate qemu aborts
because of connection problems with vhost-blk daemon.
However, it introdues a new problem. Now, any communication errors
during execution of vhost_dev_init() called by vhost_user_blk_device_realize()
lead to qemu abort on assert in vhost_dev_get_config().
This happens because vhost_user_blk_disconnect() is postponed but
it should have dropped s->connected flag by the time
vhost_user_blk_device_realize() performs a new connection opening.
On the connection opening, vhost_dev initialization in
vhost_user_blk_connect() relies on s->connection flag and
if it's not dropped, it skips vhost_dev initialization and returns
with success. Then, vhost_user_blk_device_realize()'s execution flow
goes to vhost_dev_get_config() where it's aborted on the assert.
To fix the problem this patch adds immediate cleanup on device
initialization(in vhost_user_blk_device_realize()) using different
event handlers for initialization and operation introduced in the
previous patch.
On initialization (in vhost_user_blk_device_realize()) we fully
control the initialization process. At that point, nobody can use the
device since it isn't initialized and we don't need to postpone any
cleanups, so we can do cleaup right away when there is a communication
problem with the vhost-blk daemon.
On operation we leave it as is, since the disconnect may happen when
the device is in use, so the device users may want to use vhost_dev's data
to do rollback before vhost_dev is re-initialized (e.g. in vhost_dev_set_log()).
Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20210325151217.262793-3-den-plotnikov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is useful to use different connect/disconnect event handlers
on device initialization and operation as seen from the further
commit fixing a bug on device initialization.
This patch refactors the code to make use of them: we don't rely any
more on the VM state for choosing how to cleanup the device, instead
we explicitly use the proper event handler depending on whether
the device has been initialized.
Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20210325151217.262793-2-den-plotnikov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As the comment of tx_padding_and_crc() says: "Never add CRC in QEMU",
min_frame_len should excluce CRC, so it should be 60 instead of 64.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210316081505.72898-1-bmeng.cn@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr_memory_unplug() is the last step of the hot unplug sequence.
It is indirectly called by:
spapr_lmb_release()
hotplug_handler_unplug()
and spapr_lmb_release() already buys us that DIMM unplug state is
present : it gets restored with spapr_recover_pending_dimm_state()
if missing.
g_assert() that spapr_pending_dimm_unplugs_find() cannot return NULL
in spapr_memory_unplug() to make this clear and silence Coverity.
Fixes: Coverity CID 1450767
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <161562021166.948373.15092876234470478331.stgit@bahia.lan>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Per devicetree spec v0.3 [1] chapter 2.3.5:
The #address-cells and #size-cells properties are not inherited
from ancestors in the devicetree. They shall be explicitly defined.
If missing, a client program should assume a default value of 2
for #address-cells, and a value of 1 for #size-cells.
These properties are currently missing, causing the <reg> property
of the queue-group subnode to be incorrectly parsed using default
values.
[1] https://github.com/devicetree-org/devicetree-specification/releases/download/v0.3/devicetree-specification-v0.3.pdf
Fixes: fdfb7f2cdb ("e500: Add support for eTSEC in device tree")
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20210311081608.66891-1-bmeng.cn@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In commit 81b3ddaf87 we fixed a use of uninitialized data
in read_tcnt(). However this change wasn't enough to placate
Coverity, which is not smart enough to see that if we read a
2 bit field and then handle cases 0, 1, 2 and 3 then there cannot
be a flow of execution through the switch default. Add explicit
default cases which assert that they can't be reached, which
should help silence Coverity.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210319162458.13760-1-peter.maydell@linaro.org
They were introduced in commit 9bde7f0674 ("hw/arm/smmuv3: Implement
translate callback") but never actually used. Drop them.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Acked-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20210325142702.790-1-yuzenghui@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When building with --enable-sanitizers we get:
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x5618479ec7cf in malloc (qemu-system-aarch64+0x233b7cf)
#1 0x7f675745f958 in g_malloc (/lib64/libglib-2.0.so.0+0x58958)
#2 0x561847c2dcc9 in xlnx_dp_init hw/display/xlnx_dp.c:1259:5
#3 0x56184a5bdab8 in object_init_with_type qom/object.c:375:9
#4 0x56184a5a2bda in object_initialize_with_type qom/object.c:517:5
#5 0x56184a5a24d5 in object_initialize qom/object.c:536:5
#6 0x56184a5a2f6c in object_initialize_child_with_propsv qom/object.c:566:5
#7 0x56184a5a2e60 in object_initialize_child_with_props qom/object.c:549:10
#8 0x56184a5a3a1e in object_initialize_child_internal qom/object.c:603:5
#9 0x5618495aa431 in xlnx_zynqmp_init hw/arm/xlnx-zynqmp.c:273:5
The RX/TX FIFOs are created in xlnx_dp_init(), add xlnx_dp_finalize()
to destroy them.
Fixes: 58ac482a66 ("introduce xlnx-dp")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210323182958.277654-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Max noticed that since blk_aio_pwrite_zeroes() may invoke the callback
before returning, the callbacks will never see *count == 0 and thus
never free the count variable or decrement num_formats causing a CQE to
never be posted.
Coverity (CID 1451082) also picked up on the fact that count would not
be free'ed if the namespace was of zero size.
Fix both of these issues by explicitly checking *count and finalize for
the given namespace if --(*count) is zero. Enqueing a CQE if there are
no AIOs outstanding after this case is already handled by nvme_format()
by inspecting *num_formats.
Reported-by: Max Reitz <mreitz@redhat.com>
Reported-by: Coverity (CID 1451082)
Fixes: dc04d25e2f ("hw/block/nvme: add support for the format nvm command")
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
If nvme_map_dptr() fails, nvme_dif_rw() will leak the bounce context.
Fix this by using the same error handling as everywhere else in the
function.
Reported-by: Coverity (CID 1451080)
Fixes: 146f720c55 ("hw/block/nvme: end-to-end data protection")
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
QEMU crashes with certain targets when trying to show the help
output of EHCI devices:
$ ./qemu-system-aarch64 -device ich9-usb-ehci1,help
qemu-system-aarch64: ../../devel/qemu/softmmu/physmem.c:1154: phys_section_add:
Assertion `map->sections_nb < TARGET_PAGE_SIZE' failed.
Aborted (core dumped)
This happens because the device is doing things at "instance_init" time
that should be done at "realize" time instead. So move the related code
to the realize() function instead. (NB: This now also matches the
memory_region_del_subregion() calls which are done in usb_ehci_unrealize(),
and not during finalize()).
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210326095155.1994604-1-thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since the virtio-gpu-ccw device depends on the hw-display-virtio-gpu
module, which provides the type virtio-gpu-device, packaging the
hw-display-virtio-gpu module as a separate package that may or may not
be installed along with the qemu package leads to problems. Namely if
the hw-display-virtio-gpu is absent, qemu continues to advertise
virtio-gpu-ccw, but it aborts not only when one attempts using
virtio-gpu-ccw, but also when libvirtd's capability probing tries
to instantiate the type to introspect it.
Let us thus introduce a module named hw-s390x-virtio-gpu-ccw that
is going to provide the virtio-gpu-ccw device. The hw-s390x prefix
was chosen because it is not a portable device.
With virtio-gpu-ccw built as a module, the correct way to package a
modularized qemu is to require that hw-display-virtio-gpu must be
installed whenever the module hw-s390x-virtio-gpu-ccw.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Halil Pasic <pasic@linux.ibm.com>
Message-Id: <20210317095622.2839895-4-kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Introduce a symbol which can be used to prevent ccw modules
being loaded into system emulators without ccw support.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Halil Pasic <pasic@linux.ibm.com>
Message-Id: <20210317095622.2839895-3-kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When building with --enable-sanitizers we get:
Direct leak of 32 byte(s) in 2 object(s) allocated from:
#0 0x5618479ec7cf in malloc (qemu-system-aarch64+0x233b7cf)
#1 0x7f675745f958 in g_malloc (/lib64/libglib-2.0.so.0+0x58958)
#2 0x561847f02ca2 in usb_packet_init hw/usb/core.c:531:5
#3 0x561848df4df4 in usb_ehci_init hw/usb/hcd-ehci.c:2575:5
#4 0x561847c119ac in ehci_sysbus_init hw/usb/hcd-ehci-sysbus.c:73:5
#5 0x56184a5bdab8 in object_init_with_type qom/object.c:375:9
#6 0x56184a5bd955 in object_init_with_type qom/object.c:371:9
#7 0x56184a5a2bda in object_initialize_with_type qom/object.c:517:5
#8 0x56184a5a24d5 in object_initialize qom/object.c:536:5
#9 0x56184a5a2f6c in object_initialize_child_with_propsv qom/object.c:566:5
#10 0x56184a5a2e60 in object_initialize_child_with_props qom/object.c:549:10
#11 0x56184a5a3a1e in object_initialize_child_internal qom/object.c:603:5
#12 0x561849542d18 in npcm7xx_init hw/arm/npcm7xx.c:427:5
Similarly to commit d710e1e7bd ("usb: ehci: fix memory leak in
ehci"), fix by calling usb_ehci_finalize() to free the USBPacket.
Fixes: 7341ea075c
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210323183701.281152-1-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
"-usbdevice ccid" was not documented and -usbdevice itself was marked
as deprecated before QEMU v6.0. And searching for "-usbdevice ccid"
in the internet does not show any useful results, so likely nobody
was using the ccid device via the -usbdevice option. Remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210311092829.1479051-1-thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This PR includes:
- Fix for vector CSR access
- Improvements to the Ibex UART device
- PMP improvements and bug fixes
- Hypervisor extension bug fixes
- ramfb support for the virt machine
- Fast read support for SST flash
- Improvements to the microchip_pfsoc machine
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmBZSuUACgkQIeENKd+X
cFQfqggAqiTI/KYe5GW9WBrPpGdctuEgUVBbxUhq5zY52mVGTfqEn4LbCfvdaTOp
O1MA+kfi4JN87VVWCfHPH0S725qmaPV7wfpWKi8KcPQ9uR+4RvjX/RDptkZhVjC9
Ok9p6dg2cUbz9Jm/q2V1Z69fRNMrz6pJWPxfZeTpy9bcmFNyYBR9+xiSXaW2fuAM
HsyZbsP8zHmHxfGcZwI6vpSZh3P4Ytd6nL/8v98i1DwWUsf51TsEwaS87gRQSjTz
SHqHZ9xsVM0k3glFi+El39iHzpujlONkYPvZaFP8kRhzXtaWVP1cu+CaKNUPEteq
jWNHLwFQk9VcN8uDG5o0unGEXnLJPA==
=dKa4
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20210322-2' into staging
RISC-V PR for 6.0
This PR includes:
- Fix for vector CSR access
- Improvements to the Ibex UART device
- PMP improvements and bug fixes
- Hypervisor extension bug fixes
- ramfb support for the virt machine
- Fast read support for SST flash
- Improvements to the microchip_pfsoc machine
# gpg: Signature made Tue 23 Mar 2021 01:56:53 GMT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-to-apply-20210322-2:
target/riscv: Prevent lost illegal instruction exceptions
docs/system: riscv: Add documentation for 'microchip-icicle-kit' machine
hw/riscv: microchip_pfsoc: Map EMMC/SD mux register
hw/block: m25p80: Support fast read for SST flashes
target/riscv: Add proper two-stage lookup exception detection
target/riscv: Fix read and write accesses to vsip and vsie
hw/riscv: allow ramfb on virt
hw/riscv: Add fw_cfg support to virt
target/riscv: Use background registers also for MSTATUS_MPV
target/riscv: Make VSTIP and VSEIP read-only in hip
target/riscv: Adjust privilege level for HLV(X)/HSV instructions
target/riscv: flush TLB pages if PMP permission has been changed
target/riscv: add log of PMP permission checking
target/riscv: propagate PMP permission to TLB page
hw/char: disable ibex uart receive if the buffer is full
target/riscv: fix vs() to return proper error code
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For accesses to rom blob data before or during reset, we have a
function rom_ptr() which looks for a rom blob that would be loaded to
the specified address, and returns a pointer into the rom blob data
corresponding to that address. This allows board or CPU code to say
"what is the data that is going to be loaded to this address?".
However, this function does not take account of memory region
aliases. If for instance a machine model has RAM at address
0x0000_0000 which is aliased to also appear at 0x1000_0000, a
rom_ptr() query for address 0x0000_0000 will only return a match if
the guest image provided by the user was loaded at 0x0000_0000 and
not if it was loaded at 0x1000_0000, even though they are the same
RAM and a run-time guest CPU read of 0x0000_0000 will read the data
loaded to 0x1000_0000.
Provide a new function rom_ptr_for_as() which takes an AddressSpace
argument, so that it can check whether the MemoryRegion corresponding
to the address is also mapped anywhere else in the AddressSpace and
look for rom blobs that loaded to that alias.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210318174823.18066-5-peter.maydell@linaro.org
A clock is added by commit aac63e0e6e ("hw/char/pl011: add a clock
input") since v5.2.0 which corresponds to virt-5.2 machine type. It
causes backwards migration failure from upstream to downstream (v5.1.0)
when the machine type is specified with virt-5.1.
This fixes the issue by following instructions from section "Connecting
subsections to properties" in docs/devel/migration.rst. With this applied,
the PL011 clock is migrated based on the machine type.
virt-5.2 or newer: migration
virt-5.1 or older: non-migration
Cc: qemu-stable@nongnu.org # v5.2.0+
Fixes: aac63e0e6e ("hw/char/pl011: add a clock input")
Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20210318023801.18287-1-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Windows guests using the "Basic Display Adapter" don't parse the
"Established timings III" block. They also don't parse any edid
extension.
So prefer the "Standard Timings" block to store the display resolutions
in edid_fill_modes(). Also reorder the mode list, so more exotic
resolutions (specifically the ones which are not supported by vgabios)
are moved down and the remaining ones have a better chance to get one of
the eight slots in the "Standard Timings" block.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210316143812.2363588-6-kraxel@redhat.com>
Whenever a Xen block device is detach via xenstore, the image
associated with it remained open by the backend QEMU and an error is
logged:
qemu-system-i386: failed to destroy drive: Node xvdz-qcow2 is in use
This happened since object_unparent() doesn't immediately frees the
object and thus keep a reference to the node we are trying to free.
The reference is hold by the "drive" property and the call
xen_block_drive_destroy() fails.
In order to fix that, we call drain_call_rcu() to run the callback
setup by bus_remove_child() via object_unparent().
Fixes: 2d24a64661 ("device-core: use RCU for list of children of a bus")
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20210308143232.83388-1-anthony.perard@citrix.com>
Since HSS commit c20a89f8dcac, the Icicle Kit reference design has
been updated to use a register mapped at 0x4f000000 instead of a
GPIO to control whether eMMC or SD card is to be used. With this
support the same HSS image can be used for both eMMC and SD card
boot flow, while previously two different board configurations were
used. This is undocumented but one can take a look at the HSS code
HSS_MMCInit() in services/mmc/mmc_api.c.
With this commit, HSS image built from 2020.12 release boots again.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210322075248.136255-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Per SST25VF016B datasheet [1], SST flash requires a dummy byte after
the address bytes. Note only SPI mode is supported by SST flashes.
[1] http://ww1.microchip.com/downloads/en/devicedoc/s71271_04.pdf
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210306060152.7250-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Provides fw_cfg for the virt machine on riscv. This enables
using e.g. ramfb later.
Signed-off-by: Asherah Connor <ashe@kivikakk.ee>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210318235041.17175-2-ashe@kivikakk.ee
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Not disabling the UART leads to QEMU overwriting the UART receive buffer with
the newest received byte. The rx_level variable is added to allow the use of
the existing OpenTitan driver libraries.
Signed-off-by: Alexander Wagner <alexander.wagner@ulal.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210309152130.13038-1-alexander.wagner@ulal.de
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The code that sets/gets oem fields is duplicated in both PC and MICROVM
variants. This commit moves it to X86MachineState so that all x86
variants can use it and duplication is removed.
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Message-Id: <20210221001737.24499-2-posteuca@mutex.one>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's also set a maximum size for "etc/acpi/rsdp", so the maximum
size doesn't get implicitly set based on the initial table size. In my
experiments, the table size was in the range of 22 bytes, so a single
page (== what we used until now) seems to be good enough.
Now that we have defined maximum sizes for all currently used table types,
let's assert that we catch usage with new tables that need a proper maximum
size definition.
Also assert that our initial size does not exceed the maximum size; while
qemu_ram_alloc_internal() properly asserts that the initial RAMBlock size
is <= its maximum size, the result might differ when the host page size
is bigger than 4k.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210304105554.121674-5-david@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We want to have safety margins for all tables based on the table type.
Let's move the maximum size logic into acpi_add_rom_blob() and make it
dependent on the table name, so we don't have to replicate for each and
every instance that creates such tables.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210304105554.121674-4-david@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's just reuse ACPI_BUILD_LOADER_FILE.
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210304105554.121674-3-david@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The resizeable memory region / RAMBlock that is created for the cmd blob
has a maximum size of whole host pages (e.g., 4k), because RAMBlocks
work on full host pages. In addition, in i386 ACPI code:
acpi_align_size(tables->linker->cmd_blob, ACPI_BUILD_ALIGN_SIZE);
makes sure to align to multiples of 4k, padding with 0.
For example, if our cmd_blob is created with a size of 2k, the maximum
size is 4k - we cannot grow beyond that. Growing might be required
due to guest action when rebuilding the tables, but also on incoming
migration.
This automatic generation of the maximum size used to be sufficient,
however, there are cases where we cross host pages now when growing at
runtime: we exceed the maximum size of the RAMBlock and can crash QEMU when
trying to resize the resizeable memory region / RAMBlock:
$ build/qemu-system-x86_64 --enable-kvm \
-machine q35,nvdimm=on \
-smp 1 \
-cpu host \
-m size=2G,slots=8,maxmem=4G \
-object memory-backend-file,id=mem0,mem-path=/tmp/nvdimm,size=256M \
-device nvdimm,label-size=131072,memdev=mem0,id=nvdimm0,slot=1 \
-nodefaults \
-device vmgenid \
-device intel-iommu
Results in:
Unexpected error in qemu_ram_resize() at ../softmmu/physmem.c:1850:
qemu-system-x86_64: Size too large: /rom@etc/table-loader:
0x2000 > 0x1000: Invalid argument
In this configuration, we consume exactly 4k (32 entries, 128 bytes each)
when creating the VM. However, once the guest boots up and maps the MCFG,
we also create the MCFG table and end up consuming 2 additional entries
(pointer + checksum) -- which is where we try resizing the memory region
/ RAMBlock, however, the maximum size does not allow for it.
Currently, we get the following maximum sizes for our different
mutable tables based on behavior of resizeable RAMBlock:
hw table max_size
------- ---------------------------------------------------------
virt "etc/acpi/tables" ACPI_BUILD_TABLE_MAX_SIZE (0x200000)
virt "etc/table-loader" HOST_PAGE_ALIGN(initial_size)
virt "etc/acpi/rsdp" HOST_PAGE_ALIGN(initial_size)
i386 "etc/acpi/tables" ACPI_BUILD_TABLE_MAX_SIZE (0x200000)
i386 "etc/table-loader" HOST_PAGE_ALIGN(initial_size)
i386 "etc/acpi/rsdp" HOST_PAGE_ALIGN(initial_size)
microvm "etc/acpi/tables" ACPI_BUILD_TABLE_MAX_SIZE (0x200000)
microvm "etc/table-loader" HOST_PAGE_ALIGN(initial_size)
microvm "etc/acpi/rsdp" HOST_PAGE_ALIGN(initial_size)
Let's set the maximum table size for "etc/table-loader" to 64k, so we
can properly grow at runtime, which should be good enough for the future.
Migration is not concerned with the maximum size of a RAMBlock, only
with the used size - so existing setups are not affected. Of course, we
cannot migrate a VM that would have crash when started on older QEMU from
new QEMU to older QEMU without failing early on the destination when
synchronizing the RAM state:
qemu-system-x86_64: Size too large: /rom@etc/table-loader: 0x2000 > 0x1000: Invalid argument
qemu-system-x86_64: error while loading state for instance 0x0 of device 'ram'
qemu-system-x86_64: load of migration failed: Invalid argument
We'll refactor the code next, to make sure we get rid of this implicit
behavior for "etc/acpi/rsdp" as well and to make the code easier to
grasp.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210304105554.121674-2-david@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement _DSM according to:
PCI Firmware Specification 3.1
4.6.7. DSM for Naming a PCI or PCI Express Device Under
Operating Systems
and wire it up to cold and hot-plugged PCI devices.
Feature depends on ACPI hotplug being enabled (as that provides
PCI devices descriptions in ACPI and MMIO registers that are
reused to fetch acpi-index).
acpi-index should work for
- cold plugged NICs:
$QEMU -device e1000,acpi-index=100
=> 'eno100'
- hot-plugged
(monitor) device_add e1000,acpi-index=200,id=remove_me
=> 'eno200'
- re-plugged
(monitor) device_del remove_me
(monitor) device_add e1000,acpi-index=1
=> 'eno1'
Windows also sees index under "PCI Label Id" field in properties
dialog but otherwise it doesn't seem to have any effect.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210315180102.3008391-6-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it will be used by follow up patches
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210315180102.3008391-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it helps to avoid device naming conflicts when guest OS is
configured to use acpi-index for naming.
Spec ialso says so:
PCI Firmware Specification Revision 3.2
4.6.7. _DSM for Naming a PCI or PCI Express Device Under Operating Systems
"
Instance number must be unique under \_SB scope. This instance number does not have to
be sequential in a given system configuration.
"
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210315180102.3008391-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In x86/ACPI world, linux distros are using predictable
network interface naming since systemd v197. Which on
QEMU based VMs results into path based naming scheme,
that names network interfaces based on PCI topology.
With itm on has to plug NIC in exactly the same bus/slot,
which was used when disk image was first provisioned/configured
or one risks to loose network configuration due to NIC being
renamed to actually used topology.
That also restricts freedom to reshape PCI configuration of
VM without need to reconfigure used guest image.
systemd also offers "onboard" naming scheme which is
preferred over PCI slot/topology one, provided that
firmware implements:
"
PCI Firmware Specification 3.1
4.6.7. DSM for Naming a PCI or PCI Express Device Under
Operating Systems
"
that allows to assign user defined index to PCI device,
which systemd will use to name NIC. For example, using
-device e1000,acpi-index=100
guest will rename NIC to 'eno100', where 'eno' is default
prefix for "onboard" naming scheme. This doesn't require
any advance configuration on guest side to com in effect
at 'onboard' scheme takes priority over path based naming.
Hope is that 'acpi-index' it will be easier to consume by
management layer, compared to forcing specific PCI topology
and/or having several disk image templates for different
topologies and will help to simplify process of spawning
VM from the same template without need to reconfigure
guest NIC.
This patch adds, 'acpi-index'* property and wires up
a 32bit register on top of pci hotplug register block
to pass index value to AML code at runtime.
Following patch will add corresponding _DSM code and
wire it up to PCI devices described in ACPI.
*) name comes from linux kernel terminology
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210315180102.3008391-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the block size is programmed to a different value from the
previous one, reset the data pointer of s->fifo_buffer[] so that
s->fifo_buffer[] can be filled in using the new block size in
the next transfer.
With this fix, the following reproducer:
outl 0xcf8 0x80001010
outl 0xcfc 0xe0000000
outl 0xcf8 0x80001001
outl 0xcfc 0x06000000
write 0xe000002c 0x1 0x05
write 0xe0000005 0x1 0x02
write 0xe0000007 0x1 0x01
write 0xe0000028 0x1 0x10
write 0x0 0x1 0x23
write 0x2 0x1 0x08
write 0xe000000c 0x1 0x01
write 0xe000000e 0x1 0x20
write 0xe000000f 0x1 0x00
write 0xe000000c 0x1 0x32
write 0xe0000004 0x2 0x0200
write 0xe0000028 0x1 0x00
write 0xe0000003 0x1 0x40
cannot be reproduced with the following QEMU command line:
$ qemu-system-x86_64 -nographic -machine accel=qtest -m 512M \
-nodefaults -device sdhci-pci,sd-spec-version=3 \
-drive if=sd,index=0,file=null-co://,format=raw,id=mydrive \
-device sd-card,drive=mydrive -qtest stdio
Cc: qemu-stable@nongnu.org
Fixes: CVE-2020-17380
Fixes: CVE-2020-25085
Fixes: CVE-2021-3409
Fixes: d7dfca0807 ("hw/sdhci: introduce standard SD host controller")
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Reported-by: Cornelius Aschermann (Ruhr-Universität Bochum)
Reported-by: Sergej Schumilo (Ruhr-Universität Bochum)
Reported-by: Simon Wörner (Ruhr-Universität Bochum)
Buglink: https://bugs.launchpad.net/qemu/+bug/1892960
Buglink: https://bugs.launchpad.net/qemu/+bug/1909418
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1928146
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210303122639.20004-6-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The codes to limit the maximum block size is only necessary when
SDHC_BLKSIZE register is writable.
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210303122639.20004-5-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
When an ADMA transfer is started, the codes forget to set the
controller status to indicate a transfer is in progress.
With this fix, the following 2 reproducers:
https://paste.debian.net/plain/1185136https://paste.debian.net/plain/1185141
cannot be reproduced with the following QEMU command line:
$ qemu-system-x86_64 -nographic -machine accel=qtest -m 512M \
-nodefaults -device sdhci-pci,sd-spec-version=3 \
-drive if=sd,index=0,file=null-co://,format=raw,id=mydrive \
-device sd-card,drive=mydrive -qtest stdio
Cc: qemu-stable@nongnu.org
Fixes: CVE-2020-17380
Fixes: CVE-2020-25085
Fixes: CVE-2021-3409
Fixes: d7dfca0807 ("hw/sdhci: introduce standard SD host controller")
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Reported-by: Cornelius Aschermann (Ruhr-Universität Bochum)
Reported-by: Sergej Schumilo (Ruhr-Universität Bochum)
Reported-by: Simon Wörner (Ruhr-Universität Bochum)
Buglink: https://bugs.launchpad.net/qemu/+bug/1892960
Buglink: https://bugs.launchpad.net/qemu/+bug/1909418
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1928146
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210303122639.20004-4-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Isaku Yamahata