Right now it could be used on destination side to
enable vCPU blocktime calculation for postcopy live migration.
vCPU blocktime - it's time since vCPU thread was put into
interruptible sleep, till memory page was copied and thread awake.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1521742647-25550-2-git-send-email-a.perevalov@samsung.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This reverts commit 0746a92612.
Discussion with kwolf suggests this is actually an API change that
we need to gate on a capability. Push to 2.13.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Activating the block devices causes the locks to be taken on
the backing file. If we're running with -S and the destination libvirt
hasn't started the destination with 'cont', it's expecting the locks are
still untaken.
Don't activate the block devices if we're not going to autostart the VM;
'cont' already will do that anyway.
bz: https://bugzilla.redhat.com/show_bug.cgi?id=1560854
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180328170207.49512-1-dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fix leak spotted by ASAN:
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x7fe1abb80a38 in __interceptor_calloc (/lib64/libasan.so.4+0xdea38)
#1 0x7fe1aaf1bf75 in g_malloc0 ../glib/gmem.c:124
#2 0x7fe1aaf1c249 in g_malloc0_n ../glib/gmem.c:355
#3 0x55f4841cfaa9 in postcopy_ram_fault_thread /home/elmarco/src/qemu/migration/postcopy-ram.c:596
#4 0x55f48479447b in qemu_thread_start /home/elmarco/src/qemu/util/qemu-thread-posix.c:504
#5 0x7fe1a043550a in start_thread (/lib64/libpthread.so.0+0x750a)
Regression introduced with commit 00fa4fc85b.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180321113644.21899-1-marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fix the case where when a migration with a bad protocol is tried,
we leave the block migration capability set.
(This is a cut down version of my 'migration: Fix block failure cases'
where it's other case was fixed by Peter's dd0ee30cae )
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180316202114.32345-1-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
only read_done blocks are in the queued to be flushed to the migration
stream. submitted blocks are still in flight.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1520507908-16743-6-git-send-email-pl@kamp.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
the current implementation submits up to 512 I/O requests in parallel
which is much to high especially for a background task.
This patch adds a maximum limit of 16 I/O requests that can
be submitted in parallel to avoid monopolizing the I/O device.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1520507908-16743-5-git-send-email-pl@kamp.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
RDMA migration implement save_page function for QEMUFile, but
ram_control_save_page do not increase bytes_xfer. So when doing
RDMA migration, it will use whole bandwidth.
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Message-Id: <1520692378-1835-1-git-send-email-lidongchen@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Instead of creating a QIOChannelSocket directly for the migration
server socket, use a QIONetListener. This provides the ability
to listen on multiple sockets at the same time, so enables
full support for IPv4/IPv6 dual stack.
For example, '$QEMU -incoming tcp::9000' now correctly listens
on both 0.0.0.0 and :: at the same time, instead of only on 0.0.0.0.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20180312141714.7223-1-berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Now that we have the mechanisms in here, allow shared memory in a
postcopy.
Note that QEMU can't tell who all the users of shared regions are
and thus can't tell whether all the users of the shared regions
have appropriate support for postcopy. Those devices that explicitly
support shared memory (e.g. vhost-user) must check, but it doesn't
stop weirder configurations causing problems.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Wire up a call to VHOST_USER_POSTCOPY_END message to the vhost clients
right before we ask the listener thread to shutdown.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cause the vhost-user client to be woken up whenever:
a) We place a page in postcopy mode
b) We get a fault and the page has already been received
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a hook to allow a client userfaultfd to be 'woken'
when a page arrives, and a walker that calls that
hook for relevant clients given a RAMBlock and offset.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Provide a helper to send a 'wake' request on a userfaultfd for
a shared process.
The address in the clients address space is specified together
with the RAMBlock it was resolved to.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Provide a helper to be used by shared waker functions to request
shared pages from the source.
The last_rb pointer is moved into the incoming state since this
helper can update it as well as the main fault thread function.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Utility for testing the map when you already know the offset
in the RAMBlock.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Notify the vhost-user slave on reception of the 'postcopy-listen'
event from the source.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allow other userfaultfd's to be registered into the fault thread
so that handlers for shared memory can get responses.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Wire up a notifier to send a VHOST_USER_POSTCOPY_ADVISE
message on an incoming advise.
Later patches will fill in the behaviour/contents of the
message.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a notifier chain for postcopy with a 'reason' flag
and an opportunity for a notifier member to return an error.
Call it when enabling postcopy.
This will initially used to enable devices to declare they're unable
to postcopy and later to notify of devices of stages within postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use a flag on the RAMBlock to state whether it has the
UFFDIO_ZEROPAGE capability, use it when it's available.
This allows the use of postcopy on tmpfs as well as hugepage
backed files.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Postcopy migration of dirty bitmaps. Only named dirty bitmaps are migrated.
If destination qemu is already containing a dirty bitmap with the same name
as a migrated bitmap (for the same node), then, if their granularities are
the same the migration will be done, otherwise the error will be generated.
If destination qemu doesn't contain such bitmap it will be created.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20180313180320.339796-12-vsementsov@virtuozzo.com
[Changed '+' to '*' as per list discussion. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Allow migrate-start-postcopy for any postcopy type
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20180313180320.339796-11-vsementsov@virtuozzo.com
Only-postcopy savevm states (dirty-bitmap) don't need live iteration, so
to disable them and stop transporting empty sections there is a new
savevm handler.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180313180320.339796-10-vsementsov@virtuozzo.com
Add function opposite to qemu_get_counted_string.
qemu_put_counted_string puts one-byte length of the string (string
should not be longer than 255 characters), and then it puts the string,
without last zero byte.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180313180320.339796-9-vsementsov@virtuozzo.com
There would be savevm states (dirty-bitmap) which can migrate only in
postcopy stage. The corresponding pending is introduced here.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20180313180320.339796-6-vsementsov@virtuozzo.com
This patch does not allows saving/loading vmstate when
replay events queue is not empty. There is no reliable
way to save events queue, because it describes internal
coroutine state. Therefore saving and loading operations
should be deferred to another record/replay step.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20180227095214.1060.32939.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
When setting migration capabilities via QMP/HMP, we'll apply them even
if the capability check failed. Fix it.
Fixes: 4a84214ebe ("migration: provide migrate_caps_check()", 2017-07-18)
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180305094938.31374-1-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
this actually limits (as the original commit mesage suggests) the
number of I/O buffers that can be allocated and not the number
of parallel (inflight) I/O requests.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1520507908-16743-4-git-send-email-pl@kamp.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reset the dirty bitmap before reading to make sure we don't miss
any new data.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1520507908-16743-3-git-send-email-pl@kamp.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
this patch makes the bulk phase of a block migration to take
place before we start transferring ram. As the bulk block migration
can take a long time its pointless to transfer ram during that phase.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <1520507908-16743-2-git-send-email-pl@kamp.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Spotted thanks to ASAN:
QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 tests/migration-test -p /x86_64/migration/bad_dest
==30302==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 48 byte(s) in 1 object(s) allocated from:
#0 0x7f60efba1a38 in __interceptor_calloc (/lib64/libasan.so.4+0xdea38)
#1 0x7f60eef3cf75 in g_malloc0 ../glib/gmem.c:124
#2 0x55ca9094702c in error_copy /home/elmarco/src/qemu/util/error.c:203
#3 0x55ca9037a30f in migrate_set_error /home/elmarco/src/qemu/migration/migration.c:1139
#4 0x55ca9037a462 in migrate_fd_error /home/elmarco/src/qemu/migration/migration.c:1150
#5 0x55ca9038162b in migrate_fd_connect /home/elmarco/src/qemu/migration/migration.c:2411
#6 0x55ca90386e41 in migration_channel_connect /home/elmarco/src/qemu/migration/channel.c:81
#7 0x55ca9038335e in socket_outgoing_migration /home/elmarco/src/qemu/migration/socket.c:85
#8 0x55ca9083dd3a in qio_task_complete /home/elmarco/src/qemu/io/task.c:142
#9 0x55ca9083d6cc in gio_task_thread_result /home/elmarco/src/qemu/io/task.c:88
#10 0x7f60eef37317 in g_idle_dispatch ../glib/gmain.c:5552
#11 0x7f60eef3490b in g_main_dispatch ../glib/gmain.c:3182
#12 0x7f60eef357ac in g_main_context_dispatch ../glib/gmain.c:3847
#13 0x55ca90927231 in glib_pollfds_poll /home/elmarco/src/qemu/util/main-loop.c:214
#14 0x55ca90927420 in os_host_main_loop_wait /home/elmarco/src/qemu/util/main-loop.c:261
#15 0x55ca909275fa in main_loop_wait /home/elmarco/src/qemu/util/main-loop.c:515
#16 0x55ca8fc1c2a4 in main_loop /home/elmarco/src/qemu/vl.c:1942
#17 0x55ca8fc2eb3a in main /home/elmarco/src/qemu/vl.c:4724
#18 0x7f60e4082009 in __libc_start_main (/lib64/libc.so.6+0x21009)
Indirect leak of 45 byte(s) in 1 object(s) allocated from:
#0 0x7f60efba1850 in malloc (/lib64/libasan.so.4+0xde850)
#1 0x7f60eef3cf0c in g_malloc ../glib/gmem.c:94
#2 0x7f60eef3d1cf in g_malloc_n ../glib/gmem.c:331
#3 0x7f60eef596eb in g_strdup ../glib/gstrfuncs.c:363
#4 0x55ca90947085 in error_copy /home/elmarco/src/qemu/util/error.c:204
#5 0x55ca9037a30f in migrate_set_error /home/elmarco/src/qemu/migration/migration.c:1139
#6 0x55ca9037a462 in migrate_fd_error /home/elmarco/src/qemu/migration/migration.c:1150
#7 0x55ca9038162b in migrate_fd_connect /home/elmarco/src/qemu/migration/migration.c:2411
#8 0x55ca90386e41 in migration_channel_connect /home/elmarco/src/qemu/migration/channel.c:81
#9 0x55ca9038335e in socket_outgoing_migration /home/elmarco/src/qemu/migration/socket.c:85
#10 0x55ca9083dd3a in qio_task_complete /home/elmarco/src/qemu/io/task.c:142
#11 0x55ca9083d6cc in gio_task_thread_result /home/elmarco/src/qemu/io/task.c:88
#12 0x7f60eef37317 in g_idle_dispatch ../glib/gmain.c:5552
#13 0x7f60eef3490b in g_main_dispatch ../glib/gmain.c:3182
#14 0x7f60eef357ac in g_main_context_dispatch ../glib/gmain.c:3847
#15 0x55ca90927231 in glib_pollfds_poll /home/elmarco/src/qemu/util/main-loop.c:214
#16 0x55ca90927420 in os_host_main_loop_wait /home/elmarco/src/qemu/util/main-loop.c:261
#17 0x55ca909275fa in main_loop_wait /home/elmarco/src/qemu/util/main-loop.c:515
#18 0x55ca8fc1c2a4 in main_loop /home/elmarco/src/qemu/vl.c:1942
#19 0x55ca8fc2eb3a in main /home/elmarco/src/qemu/vl.c:4724
#20 0x7f60e4082009 in __libc_start_main (/lib64/libc.so.6+0x21009)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180306170959.3921-1-marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
A new parameter "context" is added to qio_channel_tls_handshake() is to
allow the TLS to be run on a non-default context. Still, no functional
change.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We have worked on qio_task_run_in_thread() already. Further, let
all the qio channel APIs use that context.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The previous commit improved compile time by including less of the
generated QAPI headers. This is impossible for stuff defined directly
in qapi-schema.json, because that ends up in headers that that pull in
everything.
Move everything but include directives from qapi-schema.json to new
sub-module qapi/misc.json, then include just the "misc" shard where
possible.
It's possible everywhere, except:
* monitor.c needs qmp-command.h to get qmp_init_marshal()
* monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need
qapi-event.h to get enum QAPIEvent
Perhaps we'll get rid of those some other day.
Adding a type to qapi/migration.json now recompiles some 120 instead
of 2300 out of 5100 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-25-armbru@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
Let the callers take the object, then pass it to migrate_init().
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180208103132.28452-12-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We will not allow failures to happen when sending data from destination
to source via the return path. However it is possible that there can be
errors along the way. This patch allows the migrate_send_rp_message()
to return error when it happens, and further extended it to
migrate_send_rp_req_pages().
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180208103132.28452-9-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
A general helper to notify the fault thread.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180208103132.28452-4-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It was only used for quitting the page fault thread before. Let it be
something more useful - now we can use it to notify a "wake" for the
page fault thread (for any reason), and it only means "quit" if the
fault_thread_quit is set.
Since we changed what it does, renaming it to userfault_event_fd.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180208103132.28452-3-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If the postcopy down due to some reason, we can always see this on dst:
qemu-system-x86_64: RP: Received invalid message 0x0000 length 0x0000
However in most cases that's not the real issue. The problem is that
qemu_get_be16() has no way to show whether the returned data is valid or
not, and we are _always_ assuming it is valid. That's possibly not wise.
The best approach to solve this would be: refactoring QEMUFile interface
to allow the APIs to return error if there is. However it needs quite a
bit of work and testing. For now, let's explicitly check the validity
first before using the data in all places for qemu_get_*().
This patch tries to fix most of the cases I can see. Only if we are with
this, can we make sure we are processing the valid data, and also can we
make sure we can capture the channel down events correctly.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180208103132.28452-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Avoid crash in cleanup after a very early migration failure
(possibly due to my 688a3dcba9 'Route errors down ...')
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180212160340.15333-2-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
QEMUFile uses buffered IO so when writing small amounts (such as the Xen
device state file), the actual write call and any errors that may occur
only happen as part of qemu_fclose(). Therefore, report IO errors when
saving the device state under Xen by checking the return value of
qemu_fclose().
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Message-Id: <20180206163039.23661-1-ross.lagerwall@citrix.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
The macro expansions of qdict_put_TYPE() and qlist_append_TYPE() need
qbool.h, qnull.h, qnum.h and qstring.h to compile. We include qnull.h
and qnum.h in the headers, but not qbool.h and qstring.h. Works,
because we include those wherever the macros get used.
Open-coding these helpers is of dubious value. Turn them into
functions and drop the includes from the headers.
This cleanup makes the number of objects depending on qapi/qmp/qnum.h
from 4551 (out of 4743) to 46 in my "build everything" tree. For
qapi/qmp/qnull.h, the number drops from 4552 to 21.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-10-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-4-armbru@redhat.com>
If postcopy-ram was set on the source but not on the destination,
migration doesn't occur, the destination prints an error and boots
the guest:
qemu-system-ppc64: Expected vmdescription section, but got 0
We end up with two running instances.
This behaviour was introduced in 2.11 by commit 58110f0acb "migration:
split common postcopy out of ram postcopy" to prepare ground for the
upcoming dirty bitmap postcopy support. It adds a new case where the
source may send an empty postcopy advise because dirty bitmap doesn't
need to check page sizes like RAM postcopy does.
If the source has enabled postcopy-ram, then it sends an advise with
the page size values. If the destination hasn't enabled postcopy-ram,
then loadvm_postcopy_handle_advise() leaves the page size values on
the stream and returns. This confuses qemu_loadvm_state() later on
and causes the destination to start execution.
As discussed several times, postcopy-ram should be enabled both sides
to be functional. This patch changes the destination to perform some
extra checks on the advise length to ensure this is the case. Otherwise
an error is returned and migration is aborted.
Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <151791621042.19120.3103118434734245776.stgit@bahia>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Since qemu_fopen_channel_{in,out}put take references on the underlying
IO channels, make sure to release our references to them.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Message-Id: <20171101142526.1006-2-ross.lagerwall@citrix.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In e91d895 I added the new pause-before-switchover mechanism
to allow migration completion to be delayed; this changes the
last state prior to completion to MIGRATE_STATUS_DEVICE rather
than MIGRATE_STATUS_ACTIVE.
Fix the failure path in migration_completion to recover the block
devices if it fails in MIGRATE_STATUS_DEVICE, not just the
MIGRATE_STATUS_ACTIVE that it previously had.
This corresponds to rh bz:
https://bugzilla.redhat.com/show_bug.cgi?id=1538494
whose symptom is an occasional source crash on a failed migration.
Fixes: e91d8951d5
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It already has RAMBlock and offset, it can calculate it itself.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixes: b15df1ae50 ("migration: cleanup stats update into function")
The threshold size is changed to be recorded in s->threshold_size.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
MAX_VM_CMD_PACKAGED_SIZE is a constant used in qemu_savevm_send_packaged
and loadvm_handle_cmd_packaged to determine whether a package is too
big to be sent or received. qemu_savevm_send_packaged is called inside
postcopy_start (migration/migration.c) to send the MigrationState
in a single blob to the destination, using the MIG_CMD_PACKAGED subcommand,
which will read it up using loadvm_handle_cmd_packaged. If the blob is
larger than MAX_VM_CMD_PACKAGED_SIZE, an error is thrown and the postcopy
migration is aborted. Both MAX_VM_CMD_PACKAGED_SIZE and MIG_CMD_PACKAGED
were introduced by commit 11cf1d984b ("MIG_CMD_PACKAGED: Send a packaged
chunk ..."). The constant has its original value of 1ul << 24 (16MB).
The current MAX_VM_CMD_PACKAGED_SIZE value is not enough to support postcopy
migration of bigger pseries guests. The blob size for a postcopy migration of
a pseries guest with the following setup:
qemu-system-ppc64 --nographic -vga none -machine pseries,accel=kvm -m 64G \
-smp 1,maxcpus=32 -device virtio-blk-pci,drive=rootdisk \
-drive file=f27.qcow2,if=none,cache=none,format=qcow2,id=rootdisk \
-netdev user,id=u1 -net nic,netdev=u1
Goes around 12MB. Bumping the RAM to 128G makes the blob sizes goes to 20MB.
With 256G the blob goes to 37MB - more than twice the current maximum size.
At this moment the pseries machine can handle guests with up to 1TB of RAM,
making this postcopy blob goes to 128MB of size approximately.
Following the discussions made in [1], there is a need to understand what
devices are aggressively consuming the blob in that manner and see if that
can be mitigated. Until then, we can set MAX_VM_CMD_PACKAGED_SIZE to the
maximum value allowed. Since the size is a 32 bit int variable, we can set
it as 1ul << 32, giving a maximum blob size of 4G that is enough to support
postcopy migration of 32TB RAM guests given the above constraints.
[1] https://lists.nongnu.org/archive/html/qemu-devel/2018-01/msg06313.html
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Route async errors (especially from sockets) down through
migration_channel_connect and on to migrate_fd_connect where they
can be cleaned up.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Allow whatever is performing the connection to pass migrate_fd_connect
an error to indicate there was a problem during connection, an allow
us to clean up.
The caller must free the error.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
laying on the mailing list for a while, but apparently no
maintainer feels really responsible for picking up.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=JCAM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth/tags/pull-request-2018-01-22' into staging
Pull request for various patches that have been reviewed and
laying on the mailing list for a while, but apparently no
maintainer feels really responsible for picking up.
# gpg: Signature made Mon 22 Jan 2018 11:10:16 GMT
# gpg: using RSA key 0x2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>"
# gpg: aka "Thomas Huth <thuth@redhat.com>"
# gpg: aka "Thomas Huth <huth@tuxfamily.org>"
# gpg: aka "Thomas Huth <th.huth@posteo.de>"
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth/tags/pull-request-2018-01-22:
hw/isa: Replace fprintf(stderr, "*\n" with error_report()
hw/ipmi: Replace fprintf(stderr, "*\n" with error_report()
hw/bt: Replace fprintf(stderr, "*\n" with error_report()
Fixes after renaming __FUNCTION__ to __func__
Replace all occurances of __FUNCTION__ with __func__
tests/cpu-plug-test: Test CPU hot-plugging on s390x
tests/cpu-plug-test: Check CPU hot-plugging on ppc64, too
tests/cpu-plug-test: Check the CPU hot-plugging with device_add, too
tests: Rename pc-cpu-test.c to cpu-plug-test.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commits
ca6011c migration: add postcopy total blocktime into query-migrate
5f32dc8 migration: add blocktime calculation into migration-test
2f7dae9 migration: postcopy_blocktime documentation
3be98be migration: calculate vCPU blocktime on dst side
01a87f0 migration: add postcopy blocktime ctx into MigrationIncomingState
31bf06a migration: introduce postcopy-blocktime capability
as they don't build on ppc32 due to trying to do atomic accesses
on types that are larger than the host pointer type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace all occurs of __FUNCTION__ except for the check in checkpatch
with the non GCC specific __func__.
One line in hcd-musb.c was manually tweaked to pass checkpatch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
[THH: Removed hunks related to pxa2xx_mmci.c (fixed already)]
Signed-off-by: Thomas Huth <thuth@redhat.com>
The point of writing a macro embedded in a 'do { ... } while (0)'
loop (particularly if the macro has multiple statements or would
otherwise end with an 'if' statement) is so that the macro can be
used as a drop-in statement with the caller supplying the
trailing ';'. Although our coding style frowns on brace-less 'if':
if (cond)
statement;
else
something else;
that is the classic case where failure to use do/while(0) wrapping
would cause the 'else' to pair with any embedded 'if' in the macro
rather than the intended outer 'if'. But conversely, if the macro
includes an embedded ';', then the same brace-less coding style
would now have two statements, making the 'else' a syntax error
rather than pairing with the outer 'if'. Thus, even though our
coding style with required braces is not impacted, ending a macro
with ';' makes our code harder to port to projects that use
brace-less styles.
The change should have no semantic impact. I was not able to
fully compile-test all of the changes (as some of them are
examples of the ugly bit-rotting debug print statements that are
completely elided by default, and I didn't want to recompile
with the necessary -D witnesses - cleaning those up is left as a
bite-sized task for another day); I did, however, audit that for
all files touched, all callers of the changed macros DID supply
a trailing ';' at the callsite, and did not appear to be used
as part of a brace-less conditional.
Found mechanically via: $ git grep -B1 'while (0);' | grep -A1 \\\\
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20171201232433.25193-7-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is already called in migrate_fd_cleanup.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Keep the one in migrate_fd_cleanup() would be enough. Removing the other
two.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch only moved the last part of migration_thread() into a new
function migration_iteration_finish() to make it much shorter. With
previous works to remove some local variables, now it's fairly easy to
do that.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The major work for migration iterations are to move RAM/block/... data
via qemu_savevm_state_iterate(). Generalize those part into a single
function.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We have quite a few lines in migration_thread() that calculates some
statistics for the migration interations. Isolate it into a single
function to improve readability.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It converts the old if clauses into switch, explicitly mentions the
possible migration states. The old nested "if"s are not clear on what
we do on different states.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Generalize the calculation part when migration complete into a
function to simplify migration_thread().
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Introduce MigrationState.downtime_start to replace the local variable
"start_time" in migration_thread to avoid passing things around.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Firstly, it was passed around. Let's just move it into MigrationState
just like many other variables as state of migration, renaming it to
vm_was_running.
One thing to mention is that for postcopy, we actually don't need this
knowledge at all since postcopy can't resume a VM even if it fails (we
can see that from the old code too: when we try to resume we also check
against "entered_postcopy" variable). So further we do this:
- in postcopy_start(), we don't update vm_old_running since useless
- in migration_thread(), we don't need to check entered_postcopy when
resume, since it's only used for precopy.
Comment this out too for that variable definition.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It was used either to:
1. store initial timestamp of migration start, and
2. store total time used by last migration
Let's provide two parameters for each of them. Mix use of the two is
slightly misleading.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Moving existing callers all into migrate_fd_cleanup(). It simplifies
migration_thread() a bit.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When reaching here if we are still "active" it means we must be in colo
state. After a quick discussion offlist, we decided to use the safer
error_report().
Finally I want to use "switch" here rather than lots of complicated if
clauses.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
current_migration has .instance_finalize callback, but it is not
called, because nobody unrefs current_migration. Fix that.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Calling ram_bytes_remaining during the early part of setup is unsafe
because the ram_state isn't yet initialised.
This can happen in the sequence:
migrate
migrate_cancel
info migrate
if the migrate sticks trying to connect (e.g. to an unresponsive
destination due to the connect timeout). Here 'info migrate' sees
a state of CANCELLING and so assumes the migrate has partially happened.
partial fix for:
RH bz: https://bugzilla.redhat.com/show_bug.cgi?id=1525899
Reported-by: Xianxian Wang <xianwang@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Postcopy total blocktime is available on destination side only.
But query-migrate was possible only for source. This patch
adds ability to call query-migrate on destination.
To be able to see postcopy blocktime, need to request postcopy-blocktime
capability.
The query-migrate command will show following sample result:
{"return":
"postcopy-vcpu-blocktime": [115, 100],
"status": "completed",
"postcopy-blocktime": 100
}}
postcopy_vcpu_blocktime contains list, where the first item is the first
vCPU in QEMU.
This patch has a drawback, it combines states of incoming and
outgoing migration. Ongoing migration state will overwrite incoming
state. Looks like better to separate query-migrate for incoming and
outgoing migration or add parameter to indicate type of migration.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch provides blocktime calculation per vCPU,
as a summary and as a overlapped value for all vCPUs.
This approach was suggested by Peter Xu, as an improvements of
previous approch where QEMU kept tree with faulted page address and cpus bitmask
in it. Now QEMU is keeping array with faulted page address as value and vCPU
as index. It helps to find proper vCPU at UFFD_COPY time. Also it keeps
list for blocktime per vCPU (could be traced with page_fault_addr)
Blocktime will not calculated if postcopy_blocktime field of
MigrationIncomingState wasn't initialized.
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch adds request to kernel space for UFFD_FEATURE_THREAD_ID, in
case this feature is provided by kernel.
PostcopyBlocktimeContext is encapsulated inside postcopy-ram.c,
due to it being a postcopy-only feature.
Also it defines PostcopyBlocktimeContext's instance live time.
Information from PostcopyBlocktimeContext instance will be provided
much after postcopy migration end, instance of PostcopyBlocktimeContext
will live till QEMU exit, but part of it (vcpu_addr,
page_fault_vcpu_time) used only during calculation, will be released
when postcopy ended or failed.
To enable postcopy blocktime calculation on destination, need to
request proper compatibility (Patch for documentation will be at the
tail of the patch set).
As an example following command enable that capability, assume QEMU was
started with
-chardev socket,id=charmonitor,path=/var/lib/migrate-vm-monitor.sock
option to control it
[root@host]#printf "{\"execute\" : \"qmp_capabilities\"}\r\n \
{\"execute\": \"migrate-set-capabilities\" , \"arguments\": {
\"capabilities\": [ { \"capability\": \"postcopy-blocktime\", \"state\":
true } ] } }" | nc -U /var/lib/migrate-vm-monitor.sock
Or just with HMP
(qemu) migrate_set_capability postcopy-blocktime on
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Right now it could be used on destination side to
enable vCPU blocktime calculation for postcopy live migration.
vCPU blocktime - it's time since vCPU thread was put into
interruptible sleep, till memory page was copied and thread awake.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Otherwise, we can't use it after calling socket_start_incoming_migration
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Once there, do one thing for line
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
We use int for everything (int64_t), and then we check that value is
between 0 and 255. Change it to the valid types.
This change only happens for HMP. QMP always use bytes and similar.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Thanks to Laszlo Ersek for spotting the double semicolon in target/i386/kvm.c
I have trivially grepped the tree for ';;' in C files.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When migrating a VM with 'migrate_set_capability postcopy-ram on'
a postcopy_state is set during the process, ending up with the
state POSTCOPY_INCOMING_END when the migration is over. This
postcopy_state is taken into account inside ram_load to check
how it will load the memory pages. This same ram_load is called when
in a loadvm command.
Inside ram_load, the logic to see if we're at postcopy_running state
is:
postcopy_running = postcopy_state_get() >= POSTCOPY_INCOMING_LISTENING
postcopy_state_get() returns this enum type:
typedef enum {
POSTCOPY_INCOMING_NONE = 0,
POSTCOPY_INCOMING_ADVISE,
POSTCOPY_INCOMING_DISCARD,
POSTCOPY_INCOMING_LISTENING,
POSTCOPY_INCOMING_RUNNING,
POSTCOPY_INCOMING_END
} PostcopyState;
In the case where ram_load is executed and postcopy_state is
POSTCOPY_INCOMING_END, postcopy_running will be set to 'true' and
ram_load will behave like a postcopy is in progress. This scenario isn't
achievable in a migration but it is reproducible when executing
savevm/loadvm after migrating with 'postcopy-ram on', causing loadvm
to fail with Error -22:
Source:
(qemu) migrate_set_capability postcopy-ram on
(qemu) migrate tcp:127.0.0.1:4444
Dest:
(qemu) migrate_set_capability postcopy-ram on
(qemu)
ubuntu1704-intel login:
Ubuntu 17.04 ubuntu1704-intel ttyS0
ubuntu1704-intel login: (qemu)
(qemu) savevm test1
(qemu) loadvm test1
Unknown combination of migration flags: 0x4 (postcopy mode)
error while loading state for instance 0x0 of device 'ram'
Error -22 while loading VM state
(qemu)
This patch fixes this problem by changing the existing logic for
postcopy_advised and postcopy_running in ram_load, making them
'false' if we're at POSTCOPY_INCOMING_END state.
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When doing a live migration of a Xen guest with libxl, the images for
block devices are locked by the original QEMU process, and this prevent
the QEMU at the destination to take the lock and the migration fail.
>From QEMU point of view, once the RAM of a domain is migrated, there is
two QMP commands, "stop" then "xen-save-devices-state", at which point a
new QEMU is spawned at the destination.
Release locks in "xen-save-devices-state" so the destination can takes
them, if it's a live migration.
This patch add the "live" parameter to "xen-save-devices-state" which
default to true so older version of libxenlight can work with newer
version of QEMU.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
On one hand, it is a good idea for bdrv_next() to return a strong
reference because ideally nearly every pointer should be refcounted.
This fixes intermittent failure of iotest 194.
On the other, it is absolutely necessary for bdrv_next() itself to keep
a strong reference to both the BB (in its first phase) and the BDS (at
least in the second phase) because when called the next time, it will
dereference those objects to get a link to the next one. Therefore, it
needs these objects to stay around until then. Just storing the pointer
to the next in the iterator is not really viable because that pointer
might become invalid as well.
Both arguments taken together means we should probably just invoke
bdrv_ref() and blk_ref() in bdrv_next(). This means we have to assert
that bdrv_next() is always called from the main loop, but that was
probably necessary already before this patch and judging from the
callers, it also looks to actually be the case.
Keeping these strong references means however that callers need to give
them up if they decide to abort the iteration early. They can do so
through the new bdrv_next_cleanup() function.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171110172545.32609-1-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Right now it is a variable in MigrationState instead of a
MigrationParameter. The change allows to set it as the rest of the
Migration parameters, from the command line, with
query_migration_paramters, set_migrate_parameters, etc.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
After the previous commits, we make sure that the value passed is
right, or we just drop an error. So now we return if there is one
error or we have setup correctly the value passed.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
Improve error messasge
Return 0 always for success
Now that we check that the value passed is a power of 2, we don't need
to play games when comparing what is the size that is going to take
the cache.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Instead of passing silently round down the number of pages, make it an
error that the cache size is not a power of 2.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We now report errors also when we finish migration, not only on info
migrate. We plan to use this error from several places, and we want
the first error to happen to win, so we add an mutex to order it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch adds ability to track down already received
pages, it's necessary for calculation vCPU block time in
postcopy migration feature, and for recovery after
postcopy migration failure.
Also it's necessary to solve shared memory issue in
postcopy livemigration. Information about received pages
will be transferred to the software virtual bridge
(e.g. OVS-VSWITCHD), to avoid fallocate (unmap) for
already received pages. fallocate syscall is required for
remmaped shared memory, due to remmaping itself blocks
ioctl(UFFDIO_COPY, ioctl in this case will end with EEXIT
error (struct page is exists after remmap).
Bitmap is placed into RAMBlock as another postcopy/precopy
related bitmaps.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Just for placing auxilary operations inside helper,
auxilary operations like: track received pages,
notify about copying operation in futher patches.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Need to mark copied pages as closer as possible to the place where it
tracks down. That will be necessary in futher patch.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Rearrange the bitmap initialization and the first sync. Since at it,
make sure the locks are taken/released in correct order (I moved RCU
unlock upper - though it may not affect much).
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Let's further simplify ram_init_all() and ram_save_cleanup() by abstract
all the XBZRLE related codes into their own functions.
When allocating xbzrle cache, we are always very careful on -ENOMEM;
which makes sense. Replacing the last g_malloc0() with g_try_malloc0(),
then refactor the logic a bit.
This patch should be fixing some memory leaks when some memory
allocation failed for XBZRLE in the past.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
There are two Mutexes that are created but not yet destroyed for
RAMState. Fix that.
Since we are at it, provide helper function to clean up RAMState.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The old ram_state_init() is not really initializing the RAMState only,
but including lots of other stuff that is RAM-related. Renaming it to
ram_init_all(). Instead, provide a real ram_state_init().
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add pause-before-switchover support for postcopy.
After starting postcopy it will transition
active->pre-switchover->postcopy_active
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
If a migration_cancel is issued during the new paused state,
kick the pause_sem to get to unpause so it can cancel.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
A new qmp command allows the caller to continue from a given
paused state.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Wait for a semaphore before completing the migration,
if the previously added capability was enabled.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add two statuses for use when the 'pause-before-switchover'
capability is enabled.
'pre-switchover' is the state that we wait in for management
to allow us to continue.
'device' is the state we enter while serialising the devices
after management gives us the OK.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When 'pause-before-switchover' is enabled, the outgoing migration
will pause before invalidating the block devices and serializing
the device state.
At this point the management layer gets the chance to clean up any
device jobs or other device users before the migration completes.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Once there, take a total size instead of the size of the pages. We
move the check that the new_size is bigger than one page from
xbzrle_cache_resize().
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Fix typo spotted by Peter Xu
It was not used at all since commit:
27af7d6ea5
which replaced its use by the dirty sync count.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Some of the callers were already scaling bytes to sectors; others
can be easily converted to pass byte offsets, all in our shift
towards a consistent byte interface everywhere. Making the change
will also make it easier to write the hold-out callers to use byte
rather than sectors for their iterations; it also makes it easier
for a future dirty-bitmap patch to offload scaling over to the
internal hbitmap. Although all callers happen to pass
sector-aligned values, make the internal scaling robust to any
sub-sector requests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Half the callers were already scaling bytes to sectors; the other
half can eventually be simplified to use byte iteration. Both
callers were already using the result as a bool, so make that
explicit. Making the change also makes it easier for a future
dirty-bitmap patch to offload scaling over to the internal hbitmap.
Remember, asking whether a byte is dirty is effectively asking
whether the entire granularity containing the byte is dirty, since
we only track dirtiness by granularity.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Thanks to recent cleanups, all callers were scaling a return value
of sectors into bytes; do the scaling internally instead.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
vmstate_save_state is called in lots of places.
Route error returns from the easier cases back up; there are lots
of more complex cases where their own error paths need fixing.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-7-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit message fix up as Peter's review
Route the errors from vsmtate_save_state back up through
vmstate_save and out to the normal device state path.
That's the normal error path done.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-6-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Route the errors from vmstate_save_state up through
vmstate_subsection_save (and back down, all rather recursive).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-5-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit message fixed up as per Peter's review
Check the return values from vmstate_save_state for fields and also the
return values from 'put' for fields that use that.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-4-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Check the return value of pre_save state and fail vmstate_save_state
if the pre_save failed.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-3-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.
Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.
Note: If you add an error exit in your pre_save you must emit
an error_report to say why.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
auto-converge and block migration currently do not play well together.
During block migration the auto-converge logic detects that ram
migration makes no progress and thus throttles down the vm until
it nearly stalls completely. Avoid this by disabling the throttling
logic during the bulk phase of the block migration.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1506421996-12513-1-git-send-email-pl@kamp.de>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This modification is necessary for userfault fd features which are
required to be requested from userspace.
UFFD_FEATURE_THREAD_ID is a one of such "on demand" feature, which will
be introduced in the next patch.
QEMU have to use separate userfault file descriptor, due to
userfault context has internal state, and after first call of
ioctl UFFD_API it changes its state to UFFD_STATE_RUNNING (in case of
success), but kernel while handling ioctl UFFD_API expects UFFD_STATE_WAIT_API.
So only one ioctl with UFFD_API is possible per ufd.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
That tiny refactoring is necessary to be able to set
UFFD_FEATURE_THREAD_ID while requesting features, and then
to create downtime context in case when kernel supports it.
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Split common postcopy staff from ram postcopy staff.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Fill postcopy-able pending only if ram postcopy is enabled.
It is necessary because of there will be other postcopy-able states and
when ram postcopy is disabled, it should not spoil common postcopy
related pending.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Now postcopy-able states are recognized by not NULL
save_live_complete_postcopy handler. But when we have several different
postcopy-able states, it is not convenient. Ram postcopy may be
disabled, while some other postcopy enabled, in this case Ram state
should behave as it is not postcopy-able.
This patch add separate has_postcopy handler to specify behaviour of
savevm state.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We need that on later patches.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Creation of the threads, nothing inside yet.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
Use pointers instead of long array names
Move to use semaphores instead of conditions as paolo suggestion
Put all the state inside one struct.
Use a counter for the number of threads created. Needed during cancellation.
Add error return to thread creation
Add id field
Rename functions to multifd_save/load_setup/cleanup
Change recv parameters to a pointer to struct
Change back to a struct
Use Error * for _cleanup
Indicates how many pages we are going to send in each batch to a multifd
thread.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Be consistent with defaults and documentation
Use new DEFINE_PROP_*
Rename x-multifd-group to x-multifd-page-count
Indicates the number of channels that we will create. By default we
create 2 channels.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Catch inconsistent defaults (eric).
Improve comment stating that number of threads is the same than number
of sockets
Use new DEFIN_PROP_*
Rename x-multifd-threads to x-multifd-threads
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
--
Use new DEFINE_PROP
This function allows us to decide when to close the listener socket.
For now, we only need one connection.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
As this is defined on glib 2.32, add compatibility macros for older glibs.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
We pass the ioc instead of the fd. This will allow us to have more
than one channel open. We also make sure that we set the
from_src_file sooner, so we don't need to pass it as a parameter.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
--
Do not assing mis->from_src_file (peterxu)
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170907084230.26493-1-famz@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Strings are more readable for debugging.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1504081950-2528-5-git-send-email-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixed up merge with 977c73
migration_incoming_state_destroy doesn't really destroy, it cleans up.
After a loadvm it's called, but the loadvm command can be run twice,
and so destroying an init-once mutex breaks on the second loadvm.
Reported-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170825141940.20740-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Unused since commit fd8cec XBZRLE: Fix qemu crash when resize the
xbzrle cache.
Cc: Juan Quintela <quintela@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1501148776-16890-2-git-send-email-armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If the bdrv_inactivate_all fails near the end of the migration,
the migration will fail and often the only diagnostics in the log
are an I/O error which you can't distinguish from an error on
the socket connection.
Add an error so we know when it's actually a block problem.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170822170212.27347-1-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently, a FOO_lookup is an array of strings terminated by a NULL
sentinel.
A future patch will generate enums with "holes". NULL-termination
will cease to work then.
To prepare for that, store the length in the FOO_lookup by wrapping it
in a struct and adding a member for the length.
The sentinel will be dropped next.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170822132255.23945-13-marcandre.lureau@redhat.com>
[Basically redone]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-16-git-send-email-armbru@redhat.com>
[Rebased]
The next commit will put it to use. May look pointless now, but we're
going to change the FOO_lookup's type, and then it'll help.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-13-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The lookup tables have a sentinel, no need to make callers pass their
size.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-3-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Rebased, commit message corrected]
Comments for "migration_dirty_pages" and "bitmap_mutex" are switched.
Fix it.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1501666880-10159-2-git-send-email-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Spotted thanks to valgrind and tests/device-introspect-test:
==11711== 1 bytes in 1 blocks are definitely lost in loss record 6 of 14,537
==11711== at 0x4C2EB6B: malloc (vg_replace_malloc.c:299)
==11711== by 0x1E0CDBD8: g_malloc (gmem.c:94)
==11711== by 0x1E0E696E: g_strdup (gstrfuncs.c:363)
==11711== by 0x695693: migration_instance_init (migration.c:2226)
==11711== by 0x717C4B: object_init_with_type (object.c:344)
==11711== by 0x717E80: object_initialize_with_type (object.c:375)
==11711== by 0x7182EB: object_new_with_type (object.c:483)
==11711== by 0x718328: object_new (object.c:493)
==11711== by 0x4B8A29: qmp_device_list_properties (qmp.c:542)
==11711== by 0x4A9561: qmp_marshal_device_list_properties (qmp-marshal.c:1425)
==11711== by 0x819D4A: do_qmp_dispatch (qmp-dispatch.c:104)
==11711== by 0x819E82: qmp_dispatch (qmp-dispatch.c:131)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170801160419.14180-1-marcandre.lureau@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.
This patch is made by the following:
> find . -name trace-events | xargs python script.py
where script.py is the following python script:
=========================
#!/usr/bin/env python
import sys
import re
import fileinput
rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)
files = sys.argv[1:]
for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])
sys.stdout.write(''.join(arr))
=========================
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
migrate-set-parameters sets migration parameters according to is
arguments like this:
* Present means "set the parameter to this value"
* Absent means "leave the parameter unchanged"
* Except for parameters tls_creds and tls_hostname, "" means "reset
the parameter to its default value
The first two are perfectly normal: presence of the parameter makes
the command do something.
The third one overloads the parameter with a second meaning. The
overloading is *implicit*, i.e. it's not visible in the types. Works
here, because "" is neither a valid TLS credentials ID, nor a valid
host name.
Pressing argument values the schema accepts, but are semantically
invalid, into service to mean "reset to default" is not general, as
suitable invalid values need not exist. I also find it ugly.
To clean this up, we could add a separate flag argument to ask for
"reset to default", or add a distinct value to @tls_creds and
@tls_hostname. This commit implements the latter: add JSON null to
the values of @tls_creds and @tls_hostname, deprecate "".
Because we're so close to the 2.10 freeze, implement it in the
stupidest way possible: have qmp_migrate_set_parameters() rewrite null
to "" before anything else can see the null. The proper way to do it
would be rewriting "" to null, but that requires fixing up code to
work with null. Add TODO comments for that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Commit de63ab6 "migrate: Share common MigrationParameters struct"
reused MigrationParameters for the arguments of
migrate-set-parameters, with the following rationale:
It is rather verbose, and slightly error-prone, to repeat
the same set of parameters for input (migrate-set-parameters)
as for output (query-migrate-parameters), where the only
difference is whether the members are optional. We can just
document that the optional members will always be present
on output, and then share a common struct between both
commands. The next patch can then reduce the amount of
code needed on input.
I need to unshare them to correct a design flaw in a stupid, but
minimally invasive way, in the next commit. We can restore the
sharing when we redo that patch in a less stupid way. Add a suitable
TODO comment.
Note that I revert only the sharing part of commit de63ab6, not the
part that made the members of query-migrate-parameters' result
optional. The schema (and thus introspection) remains inaccurate for
query-migrate-parameters. If we decide not to restore the sharing, we
should revert that part, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qmp_query_migrate_parameters() and qmp_migrate_set_parameters()
effectively duplicate QAPI_CLONE() inline. Add suitable TODO
comments.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Optional MigrationParameters members tls_creds and tls_hostname can't
actually be absent outside qmp_migrate_set_parameters() since commit
4af245d (v2.9.0).
Note that commit 4af245d reverted the part of commit de63ab6 (v2.8.0)
that made tls_creds and tls_hostname absent instead of "" in the value
of query-migrate-parameters, even though commit de63ab6 called that a
mistake. What a mess.
Drop the redundant tests for presence, and update documentation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Checks validity for all the capabilities that we enabled with command
line.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1500349150-13240-11-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Abstracted from migrate_set_block_enabled() to allocate
MigrationCapabilityStatusList properly.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-10-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Abstract helper function to check migration capabilities (from the old
qmp_migrate_set_capabilities). Prepare to be used somewhere else.
There is side effect on the change: when applying the capabilities, we
were skipping the invalid ones, but still applying the valid ones (if
they are provided in the same QMP request). After this refactoring,
we'll ignore all the capabilities if we detected invalid setup along the
way. However, I don't think it is a problem since general users should
not provide anything invalid after all.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-9-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Since commit a15215f3 ("build: remove --enable-colo/--disable-colo"),
colo is always supported. We don't need any colo_supported() now since
it is always true. Removing any extra code that depends on it.
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Hailiang Zhang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Zhang Chen<zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-8-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Adding validity check for the migration parameters passed in via global
properties.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1500349150-13240-7-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Abstracted from qmp_migrate_set_parameters().
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-6-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Helper to check the parameters. Abstracted from
qmp_migrate_set_parameters().
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-5-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Do the same thing to migration capabilities, just like what we did in
previous patch for migration parameters.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-4-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Export migration parameters to qdev properties. Then we can use, for
example:
-global migration.x-cpu-throttle-initial=xxx
To specify migration parameters during init.
Prefix "x-" is appended for each parameter exported to show that this is
not a stable interface, and only for debugging/testing purpose.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-3-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When we issue a cancel and clean up the RDMA channel
send a CONTROL_ERROR to get the destination to quit.
The rdma_cleanup code waits for the event to come back
from the rdma_disconnect; but that wont happen until the
destination quits and there's currently nothing to force
it.
Note this makes the case of a cancel work while the destination
is alive, and it already works if the destination is
truly dead. Note it doesn't fix the case where the destination
is hung (we get stuck waiting for the rdma_disconnect event).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20170717110936.23314-7-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
control_desc[] is an array of strings that correspond to a
series of message types; they're used only for error messages, but if
the message type is seriously broken then we could go off the end of
the array.
Convert the array to a function control_desc() that bound checks.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170717110936.23314-6-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When waiting for a WRID, if the other side dies we end up waiting
for ever with no way to cancel the migration.
Cure this by poll()ing the fd first with a timeout and checking
error flags and migration state.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20170717110936.23314-5-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The two places that 'goto err_block_for_wrid' weren't setting ret
and so would end up returning 0 even though we've failed.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20170717110936.23314-4-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Closing the file before exit on a failure allows
the source to cleanup better, especially with RDMA.
Partial fix for https://bugs.launchpad.net/qemu/+bug/1545052
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170717110936.23314-3-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Fix a race where the destination might try and send the source a
WRID_READY before the source has done a post-recv for it.
rdma_post_recv has to happen after the qp exists, and we're
OK since we've already called qemu_rdma_source_init that calls
qemu_alloc_qp.
This corresponds to:
https://bugzilla.redhat.com/show_bug.cgi?id=1285044
The race can be triggered by adding a few ms wait before this
post_recv_control (which was originally due to me turning on loads of
debug).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20170717110936.23314-2-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Once there, be consistent and use
compress_thread_{save,load}_{setup,cleanup}.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170628095228.4661-6-quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Once there, I rename ram_migration_cleanup() to ram_save_cleanup().
Notice that this is the first pass, and I only passed XBZRLE to the
new scheme. Moved decoded_buf to inside XBZRLE struct.
As a bonus, I don't have to export xbzrle functions from ram.c.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
loaded_data pointer was needed because called can change it (dave)
spell loaded correctly in comment (dave)
Message-Id: <20170628095228.4661-5-quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We need to do things at load time and at cleanup time.
Signed-off-by: Juan Quintela <quintela@redhat.com>
--
Move the printing of the error message so we can print the device
giving the error.
Add call to postcopy stuff
Message-Id: <20170628095228.4661-4-quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We need a cleanup for loads, so we rename here to be consistent.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
Rename htab_cleanup to htap_save_cleanup as dave suggestion
Message-Id: <20170628095228.4661-3-quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We are going to use it now for more than save live regions.
Once there rename qemu_savevm_state_begin() to qemu_savevm_state_setup().
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170628095228.4661-2-quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
[Peter collected Eduardo's patch comment and formatted into patch]
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1499242883-2184-5-git-send-email-peterx@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
MigrateState object is not ready at that time, so we'll get an
assertion. Use qemu_global_option() instead.
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Fixes: 3df663e ("migration: move only_migratable to MigrationState")
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1499242883-2184-2-git-send-email-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. In the common case, allocation is unlikely to ever use
values that are not naturally sector-aligned, but it is possible
that byte-based values will let us be more precise about allocation
at the end of an unaligned file that can do byte-based access.
Changing the signature of the function to use int64_t *pnum ensures
that the compiler enforces that all callers are updated. For now,
the io.c layer still assert()s that all callers are sector-aligned
on input and that *pnum is sector-aligned on return to the caller,
but that can be relaxed when a later patch implements byte-based
block status. Therefore, this code adds usages like
DIV_ROUND_UP(,BDRV_SECTOR_SIZE) to callers that still want aligned
values, where the call might reasonbly give non-aligned results
in the future; on the other hand, no rounding is needed for callers
that should just continue to work with byte alignment.
For the most part this patch is just the addition of scaling at the
callers followed by inverse scaling at bdrv_is_allocated(). But
some code, particularly bdrv_commit(), gets a lot simpler because it
no longer has to mess with sectors; also, it is now possible to pass
NULL if the caller does not care how much of the image is allocated
beyond the initial offset. Leave comments where we can further
simplify once a later patch eliminates the need for sector-aligned
requests through bdrv_is_allocated().
For ease of review, bdrv_is_allocated_above() will be tackled
separately.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When this capability is enabled, QEMU will use the return path even for
precopy migration. This is helpful at least in one case when destination
failed to load the image while source quited without confirmation. With
return path, source will wait for the last response from destination,
and if destination fails, it'll fail the migration on source, then the
guest can be run again on the source (rather than assuming to be good,
then the guest will be lost after source quits).
It needs to be enabled explicitly on source, otherwise disabled.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498472935-14461-1-git-send-email-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In some cases a failing VMSTATE_*_EQUAL does not mean we detected a bug,
but it's actually the best we can do. Especially in these cases a verbose
error message is required.
Let's introduce infrastructure for specifying a error hint to be used if
equal check fails. Let's do this by adding a parameter to the _EQUAL
macros called _err_hint. Also change all current users to pass NULL as
last parameter so nothing changes for them.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170623144823.42936-1-pasic@linux.vnet.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It'll be strange that the migration object inherits TYPE_DEVICE. Add
some explanations to it.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498634144-26508-1-git-send-email-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Now we have some globals that can be configured for migration. Dump them
in HMP info migration for better debugging.
(we can also use this to monitor whether COMPAT fields are applied
correctly on compatible machines)
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-11-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
These two parameters:
- MachineState::enforce_config_section
- MigrationState::send_configuration
are playing similar role here. This patch merges the first one into
second, then we'll have a single place to reference whether we need to
send the configuration section.
I didn't remove the MachineState.enforce_config_section field since when
applying that machine property (in machine_set_property()) we haven't
yet initialized global properties and migration object. Then, it's
still not easy to pass that boolean to MigrationState at such an early
time.
A natural benefit for current patch is that now we kept the meaning of
"enforce-config-section" since it'll still have the highest
priority (that's what "enforce" mean I guess).
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-10-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Move it into MigrationState, revert its meaning and renaming it to
send_section_footer, with a property bound to it. Same trick is played
like previous patches.
Removing savevm_skip_section_footers().
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-9-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It was in SaveState but now moved to MigrationState altogether, reverted
its meaning, then renamed to "send_configuration". Again, using
HW_COMPAT_2_3 for old PC/SPAPR machines, and accel_register_prop() for
xen_init().
Removing savevm_skip_configuration().
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-8-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
One less global variable, and it does only matter with migration.
We keep the old "--only-migratable" option, but also now we support:
-global migration.only-migratable=true
Currently still keep the old interface.
Hmm, now vl.c has no way to access migrate_get_current(). Export a
function for it to setup only_migratable.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-7-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Put it into MigrationState then we can use the properties to specify
whether to enable storing global state.
Removing global_state_set_optional() since now we can use HW_COMPAT_2_3
for x86/power, and AccelClass.global_props for Xen.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-6-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Let the old man "MigrationState" join the object family. Direct benefit
is that we can start to use all the property features derived from
current QDev, like: HW_COMPAT_* bits, command line setup for migration
parameters (so will never need to set them up each time using HMP/QMP,
this is really, really attractive for test writters), etc.
I see no reason to disallow this happen yet. So let's start from this
one, to see whether it would be anything good.
Now we init the MigrationState struct statically in main() to make sure
it's initialized after global properties are applied, since we'll use
them during creation of the object.
No functional change at all.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-5-git-send-email-peterx@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
migration_incoming_state_destroy() uses qemu_fclose() on the vmstate
file. Make sure to call it inside an AioContext acquire/release region.
This fixes an 'qemu: qemu_mutex_unlock: Operation not permitted' abort
in loadvm.
This patch closes the vmstate file before ending the drained region.
Previously we closed the vmstate file after ending the drained region.
The order does not matter.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blk/bdrv_drain_all() only takes effect for a single instant and then
resumes block jobs, guest devices, and other external clients like the
NBD server. This can be handy when performing a synchronous drain
before terminating the program, for example.
Monitor commands usually need to quiesce I/O across an entire code
region so blk/bdrv_drain_all() is not suitable. They must use
bdrv_drain_all_begin/end() to mark the region. This prevents new I/O
requests from slipping in or worse - block jobs completing and modifying
the graph.
I audited other blk/bdrv_drain_all() callers but did not find anything
that needs a similar fix. This patch fixes the savevm/loadvm commands.
Although I haven't encountered a read world issue this makes the code
safer.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
AioContext was designed to allow nested acquire/release calls. It uses
a recursive mutex so callers don't need to worry about nesting...or so
we thought.
BDRV_POLL_WHILE() is used to wait for block I/O requests. It releases
the AioContext temporarily around aio_poll(). This gives IOThreads a
chance to acquire the AioContext to process I/O completions.
It turns out that recursive locking and BDRV_POLL_WHILE() don't mix.
BDRV_POLL_WHILE() only releases the AioContext once, so the IOThread
will not be able to acquire the AioContext if it was acquired
multiple times.
Instead of trying to release AioContext n times in BDRV_POLL_WHILE(),
this patch simply avoids nested locking in save_vmstate(). It's the
simplest fix and we should step back to consider the big picture with
all the recent changes to block layer threading.
This patch is the final fix to solve 'savevm' hanging with -object
iothread.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Version: GnuPG v2
iQEtBAABCAAXBQJZQyPmEBxmYW16QHJlZGhhdC5jb20ACgkQyjViTGqRccaWrgf/
SCAHpi4gzWbr7AN03jP16Qy/kqNik6F7LTNSqrRbvBPb3TNchDd4z44SAghK5m/r
+IlYQc20sBZ60tRHIHAUSF2WNcea2pj1v3ZVgjrI7hiJ3DXPiqqt/dAR/W/BLIDO
tAHAVF6Pnrjm9DC4d2zATLDHvcHMzWOsnePh7XcOm44REbwUr3GDg6bf2+j+5yfS
9ewmXfh8z4w1IvSn+f5B+IeCvGvJNA1D55dqcGo8Ivlg9PnElziXFaXO2s7UiLIM
mF3eTSIbJQNNN+E+0lpRpnqQiq+Txxggu61Q4f8bOTBhEOPa3etj1ydnXMVbvX25
6SUuBfGh51tyOIZOJz3GtA==
=9b+J
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/famz/tags/docker-and-block-pull-request' into staging
# gpg: Signature made Fri 16 Jun 2017 01:18:46 BST
# gpg: using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/docker-and-block-pull-request: (23 commits)
block: make accounting thread-safe
block: split BlockAcctStats creation and setup
block: introduce block_account_one_io
block: protect modification of dirty bitmaps with a mutex
migration/block: reset dirty bitmap before reading
block: introduce dirty_bitmap_mutex
block: protect tracked_requests and flush_queue with reqs_lock
block: access write_gen with atomics
block: use Stat64 for wr_highest_offset
util: add stats64 module
throttle-groups: protect throttled requests with a CoMutex
throttle-groups: do not use qemu_co_enter_next
throttle-groups: only start one coroutine from drained_begin
block: access io_plugged with atomic ops
block: access wakeup with atomic ops
block: access serialising_in_flight with atomic ops
block: access io_limits_disabled with atomic ops
block: access quiesce_counter with atomic ops
block: access copy_on_read with atomic ops
docker: Add flex and bison to centos6 image
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Previously, dst side will immediately try to lock the write byte upon
receiving QEMU_VM_EOF, but at src side, bdrv_inactivate_all() is only
done after sending it. If the src host is under load, dst may fail to
acquire the lock due to racing with the src unlocking it.
Fix this by hoisting the bdrv_inactivate_all() operation before
QEMU_VM_EOF.
N.B. A further improvement could possibly be done to cleanly handover
locks between src and dst, so that there is no window where a third QEMU
could steal the locks and prevent src and dst from running.
N.B. This commit includes a minor improvement to the error handling
by using qemu_file_set_error().
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20170616160658.32290-1-famz@redhat.com
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[PMM: noted qemu_file_set_error() use in commit as suggested by Daniel]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Any data that is returned by read may be stale already, the bitmap
has to be cleared before issuing the read.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-16-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
It protects only the list of dirty bitmaps; in the next patch we will
also protect their content.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-15-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
I removed the [HACK] part because previous patch just check that
compression pages are not received.
Right now, if we receive a compressed page while this features are
disabled, Bad Things (TM) can happen. Just add a test for them.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
I had XBZRLE here also, but it don't need extra resources on
destination, only on source. Additionally libvirt don't enable it on
destination, so don't put it here.
- initialize invalid_flags at declaration time.
- remove extra space (peter)
0425dc9 is actually v1 of that patch, but it was accidentally
merged (while there was a v2). That will cause problem when we try to
migrate to some old QEMUs when return path is not really there. Let's
fix it, then squashing this patch with 0425dc9 will be exactly patch
content of v2.
Fixes: 0425dc9 ("migration: isolate return path on src")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Nothing uses it outside of migration.h
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
It don't belong anywhere else, just the global state where everybody
can stick other things.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
So, move them there. Notice that we export functions that send
commands, not the command themselves.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
They are indpendent, and nowadays almost every device register things
with qdev->vmsd.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
All callers were calling migrate_get_current(), so do it inside the function.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Merge them.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Once there, create populate_disk_info.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
--
- create populate_disk_info instead of "abusing" populate_ram_info
Assigning directly to *errp is not valid, as errp may be NULL,
&error_fatal, or &error_abort. Use error_propagate() instead.
Cc: Juan Quintela <quintela@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
There are some places that binded "return path" with postcopy. Let's be
prepared for its usage even without postcopy. This patch mainly did this
on source side.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We need to release any block migrations BlockBackends on the source
before successfully completing the migration because otherwise
inactivating the images will fail (inactivation only tolerates device
BBs).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Block migration may still access the image during its
.save_live_complete_precopy() implementation, so we should only
inactivate the image afterwards.
Another reason for the change is that inactivating an image fails when
there is still a non-device BlockBackend using it, which includes the
BBs used by block migration. We want to give block migration a chance to
release the BBs before trying to inactivate the image (this will be done
in another patch).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
In load_snapshot, mis->from_src_file is freed twice, the first free is by
qemu_fclose, the second is by migration_incoming_state_destroy and
it causes Illegal instruction exception. The fix is just to remove the
first free.
This problem is found by qemu-iotests case 068 since commit
"660819b migration: shut src return path unconditionally". The error is:
068 1s ... - output mismatch (see 068.out.bad)
--- tests/qemu-iotests/068.out 2017-05-06 01:00:26.417270437 +0200
+++ 068.out.bad 2017-06-03 13:59:55.360274640 +0200
@@ -6,6 +6,8 @@
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) savevm 0
(qemu) quit
+./common.config: line 107: 242472 Illegal instruction (core dumped) ( if [ -n "${QEMU_NEED_PID}" ]; then
+ echo $BASHPID > "${QEMU_TEST_DIR}/qemu-${_QEMU_HANDLE}.pid";
+fi; exec "$QEMU_PROG" $QEMU_OPTIONS "$@" )
QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) quit
-*** done
+(qemu) *** done
Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We create the variable while we are at migration and we remove it
after migration.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
RAM Statistics need to survive migration to make info migrate work, so we
need to store them outside of RAMState. As we already have an struct
with those fields, just used them. (MigrationStats and XBZRLECacheStats).
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
It was only used by XBZRLE anyways.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
We shouldn't be using memory later than that.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
As a rule, CPU internal state should never be updated when
!cpu->kvm_vcpu_dirty (or the HAX equivalent). If that is done, then
subsequent calls to cpu_synchronize_state() - usually safe and idempotent -
will clobber state.
However, we routinely do this during a loadvm or incoming migration.
Usually this is called shortly after a reset, which will clear all the cpu
dirty flags with cpu_synchronize_all_post_reset(). Nothing is expected
to set the dirty flags again before the cpu state is loaded from the
incoming stream.
This means that it isn't safe to call cpu_synchronize_state() from a
post_load handler, which is non-obvious and potentially inconvenient.
We could cpu_synchronize_all_state() before the loadvm, but that would be
overkill since a) we expect the state to already be synchronized from the
reset and b) we expect to completely rewrite the state with a call to
cpu_synchronize_all_post_init() at the end of qemu_loadvm_state().
To clear this up, this patch introduces cpu_synchronize_pre_loadvm() and
associated helpers, which simply marks the cpu state as dirty without
actually changing anything. i.e. it says we want to discard any existing
KVM (or HAX) state and replace it with what we're going to load.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dave Gilbert <dgilbert@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
We can replace the four remaining calls of register_savevm() by
calls to register_savevm_live(). So we can remove the function and
as we don't allocate anymore the ops pointer with g_new0()
we don't have to free it then.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
All functions were internal, except blk_mig_init() that is exported in
misc.h now.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
All functions are internal except for ram_mig_init(). Create
migration/misc.h for this kind of functions.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Start removing migration code from sysemu/sysemu.h.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Just for the functions exported from tls.c. Notice that we can't
remove the migration/migration.h include from tls.c because it access
directly MigrationState for the tls params.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Split the file into public and internal interfaces. I have to rename
the external one because we can't have two include files with the same
name in the same directory. Build system gets confused. The only
exported functions are the ones that handle basic types.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We were do the shutting off only for postcopy. Now we do this as long as
the source return path is there.
Moving the cleanup of from_src_file there too.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The return path channel is possibly leaked. Fix it.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Everything else assumes that we always load a device from its own
savevm handler.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
So we remove all traces of them.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There is no reason for having the loadvm_handlers at all. There is
only one use, and we can use the savevm handlers.
We will remove the loadvm handlers on a following patch.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
- Added load_version_id: version_id read from the stream (laurent)
- Added load_section_id: section_id read from the stream (dave)
The commit message from 070afca25 suggests that dirty_rate_high_cnt
should be used more aggressively to start throttling after two
iterations instead of four. The code, however, only changes the auto
convergence behaviour to throttle after three iterations. This makes the
behaviour more aggressive by kicking off throttling after two iterations
as originally intended.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The bytes_xfer_now/prev counters are only used by the auto convergence
logic. However, they are used alongside the dirty_pages_rate counter,
which is calculated (and required) outside of this logic. The problem
with this approach is that if the auto convergence capability is changed
while a migration is ongoing, the relationship of the counters will be
broken.
This moves the management of bytes_xfer_now/prev counters outside of the
auto convergence logic to address this issue.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Currently, a "period" in the RAM migration logic is at least a second
long and accounts for what happened since the last period (or the
beginning of the migration). The dirty_pages_rate counter is calculated
at the end this logic.
If the auto convergence capability is enabled from the start of the
migration, it won't be able to use this counter the first time around.
This calculates dirty_pages_rate as soon as a period is deemed over,
which allows for it to be used immediately.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The first time migration_bitmap_sync() is called, bytes_xfer_prev is set
to ram_state.bytes_transferred which is, at this point, zero. The next
time migration_bitmap_sync() is called, an iteration has happened and
bytes_xfer_prev is set to 'x' bytes. Most likely, more than one second
has passed, so the auto converge logic will be triggered and
bytes_xfer_now will also be set to 'x' bytes.
This condition is currently masked by dirty_rate_high_cnt, which will
wait for a few iterations before throttling. It would otherwise always
assume zero bytes have been copied and therefore throttle the guest
(possibly) prematurely.
Given bytes_xfer_prev is only used by the auto convergence logic, it
makes sense to only set its value after a check has been made against
bytes_xfer_now.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This removes last trace of migration functions from sysemu/sysemu.h.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
We want to track why a guest was shutdown; in particular, being able
to tell the difference between a guest request (such as ACPI request)
and host request (such as SIGINT) will prove useful to libvirt.
Since all requests eventually end up changing shutdown_requested in
vl.c, the logical change is to make that value track the reason,
rather than its current 0/1 contents.
Since command-line options control whether a reset request is turned
into a shutdown request instead, the same treatment is given to
reset_requested.
This patch adds an internal enum ShutdownCause that describes reasons
that a shutdown can be requested, and changes qemu_system_reset() to
pass the reason through, although for now nothing is actually changed
with regards to what gets reported. The enum could be exported via
QAPI at a later date, if deemed necessary, but for now, there has not
been a request to expose that much detail to end clients.
For the most part, we turn 0 into SHUTDOWN_CAUSE_NONE, and 1 into
SHUTDOWN_CAUSE_HOST_ERROR; the only specific case where we have enough
information right now to use a different value is when we are reacting
to a host signal. It will take a further patch to edit all call-sites
that can trigger a reset or shutdown request to properly pass in any
other reasons; this patch includes TODOs to point such places out.
qemu_system_reset() trades its 'bool report' parameter for a
'ShutdownCause reason', with all non-zero values having the same
effect; this lets us get rid of the weird #defines for VMRESET_*
as synonyms for bools.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170515214114.15442-3-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
It only needed TARGET_PAGE_SIZE/BITS/BITS_MIN values, so just export
them from exec.h
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
That is the only function that we need from exec.c, and having to
include the whole sysemu.h for this.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
/me leans to be less sloppy with copyright notices
thanks Dave
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
Minor rearrangements due to rebase
Now one just has the interperter, and the other has the basic types.
Once there, add copyright boilerplate.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Use GPL v2 or later. Detected by David.
Create an include for its exported functions.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
Add proper header
Many users now prefer to use drive_mirror over NBD as an
alternative to the older migrate -b option; drive_mirror is
more complex to setup but gives you more options (e.g. only
migrating some of the disks if some of them are shared).
Allow the large chunk of block migration code to be compiled
out for those who don't use it.
Based on a downstream-patch we've had for a while by Jeff Cody.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
--
- When compiled out, allow seting block only with false value (eric)
Not used anymore after moving block migration to use capabilities.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
We have change in the previous patch to use migration capabilities for
it. Notice that we continue using the old command line flags from
migrate command from the time being. Remove the set_params method as
now it is empty.
For savevm, one can't do a:
savevm -b/-i foo
but now one can do:
migrate_set_capability block on
savevm foo
And we can't use block migration. We could disable block capability
unconditionally, but it would not be much better.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
- Maintain shared/enabled dependency (Xu suggestion)
- Now we maintain the dependency on the setter functions
- improve error messages
Create one capability for block migration and one parameter for
incremental block migration.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
- address all Markus comments
- use Markus and Eric text descriptions
- change logic another time
- improve text messages
It turns out that it's legal to create a VM with RAMBlocks that aren't
a multiple of the pagesize in use; e.g. a 1025M main memory using
2M host pages. That breaks postcopy's atomic placement of pages,
so disallow it.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Unfortunately it's legal to create a VM with a RAM size that's
not a multiple of the underlying host page or huge page size.
Recently I'd changed things to always send host sized pages,
and that breaks if we have say a 1025MB guest on 2MB hugepages.
Unfortunately we can't just make that illegal since it would break
migration from/to existing oddly configured VMs.
Symptom: qemu-system-x86_64: Illegal RAM offset 40100000
as it transmits the fraction of the hugepage after the end
of the RAMBlock (may also cause a crash on the source
- possibly due to clearing bits after the bitmap)
Reported-by: Yumei Huang <yuhuang@redhat.com>
Red Hat bug: https://bugzilla.redhat.com/show_bug.cgi?id=1449037
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
-----BEGIN PGP SIGNATURE-----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=wJvl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'dgilbert/tags/pull-hmp-20170517' into staging
HMP pull
# gpg: Signature made Wed 17 May 2017 07:03:39 PM BST
# gpg: using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* dgilbert/tags/pull-hmp-20170517:
ramblock: add new hmp command "info ramblock"
utils: provide size_to_str()
ramblock: add RAMBLOCK_FOREACH()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
So that it can simplifies the iterators.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1494562661-9063-2-git-send-email-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The function is only used once, and nothing else in migration knows
about objects. Create the function vmstate_device_is_migratable() in
savem.c that really do the bit that is related with migration.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Yes, we don't have a good place to put that stuff.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It is only used by migration, so move it there.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This allows us to remove lots of includes of migration/migration.h
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reflects better what it does now, and avoid confussions with
RAM_SAVE_FLAG_COMPRESS_PAGE.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
This way we use the "normal" way of printing errors for hmp commands.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Compression threads got broken on commit
commit 2479569466
Author: Juan Quintela <quintela@redhat.com>
Date: Tue Mar 21 11:45:01 2017 +0100
ram: reorganize last_sent_block
On do_compress_ram_page() we use a different QEMUFile than the
migration one. We need to pass it there. The failure can be seen as:
(qemu) qemu-system-x86_64: Unknown combination of migration flags: 0
qemu-system-x86_64: error while loading state section id 3(ram)
qemu-system-x86_64: load of migration failed: Invalid argument
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Peter Xu <peterx@redhat.com>
Instead of manually calling blk_resume_after_migration() in migration
code after doing bdrv_invalidate_cache_all(), integrate the BlockBackend
activation with cache invalidation into a single function. This is
achieved with a new callback in BdrvChildRole that is called by
bdrv_invalidate_cache_all().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Migration code activates all block driver nodes on the destination when
the migration completes. It does so by calling
bdrv_invalidate_cache_all() and blk_resume_after_migration(). There is
one code path for precopy and one for postcopy migration, resulting in
four function calls, which used to have three different failure modes.
This patch unifies the behaviour so that failure to activate all block
nodes is non-fatal, but the error message is logged and the VM isn't
automatically started. 'cont' will retry activating the block nodes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
SocketAddressLegacy is a simple union, and simple unions are awkward:
they have their variant members wrapped in a "data" object on the
wire, and require additional indirections in C. SocketAddress is the
equivalent flat union. Convert all users of SocketAddressLegacy to
SocketAddress, except for existing external interfaces.
See also commit fce5d53..9445673 and 85a82e8..c5f1ae3.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-7-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Minor editing accident fixed, commit message and a comment tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The next commit will rename SocketAddressFlat to SocketAddress, and
the commit after that will replace most uses of SocketAddressLegacy by
SocketAddress, replacing most of this commit's renames right back.
Note that checkpatch emits a few "line over 80 characters" warnings.
The long lines are all temporary; the SocketAddressLegacy replacement
will shorten them again.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-5-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
I'm going to flatten SocketAddress: rename SocketAddress to
SocketAddressLegacy, SocketAddressFlat to SocketAddress, eliminate
SocketAddressLegacy except in external interfaces.
inet_parse() returns a newly allocated InetSocketAddress. Lift the
allocation from inet_parse() into its caller socket_parse() to prepare
for flattening SocketAddress.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-3-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Straightforward rebase]
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=B+5d
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'kwolf/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Fri 28 Apr 2017 09:20:17 PM BST
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* kwolf/tags/for-upstream: (34 commits)
progress: Show current progress on SIGINFO
iotests: fix exclusion option
iotests: clarify help text
qemu-img: use blk_co_pwrite_zeroes for zero sectors when compressed
qemu-img: improve convert_iteration_sectors()
block: assert no image modification under BDRV_O_INACTIVE
block: fix obvious coding style mistakes in block_int.h
qcow2: Allow discard of final unaligned cluster
block: Add .bdrv_truncate() error messages
block: Add errp to BD.bdrv_truncate()
block: Add errp to b{lk,drv}_truncate()
block/vhdx: Make vhdx_create() always set errp
qemu-img: Document backing options
qemu-img/convert: Move bs_n > 1 && -B check down
qemu-img/convert: Use @opts for one thing only
block: fix alignment calculations in bdrv_co_do_zero_pwritev
block: Do not unref bs->file on error in BD's open
iotests: 109: Filter out "len" of failed jobs
iotests: Fix typo in 026
Issue a deprecation warning if the user specifies the "-hdachs" option.
...
Message-id: 1493411622-5343-1-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A couple more traces that would have made fixing that postcopy
bug a bit easier.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It is internal to migration, not intended for other users.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It only uses block/* functions, nothing from migration.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It really uses block/* stuff, not migration one.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It is a monitor command, and has nothing migration specific in it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
load_vmstate() already use error_report, so be consistent. There is
an identical error message in load_vmstate() that ends in a
period. Remove it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We have just arrived as:
migration.c: qemu_migrate()
....
s = migrate_init() <- puts it to NULL
....
{tcp,unix}_start_outgoing_migration ->
socket_outgoing_migration
migration_channel_connect()
sets to_dst_file
if tls is enabled, we do another round through
migrate_channel_tls_connect(), but we only set it up if there is no
error. So we don't need the assignation. I am removing it to remove
in the follwing patches the knowledge about MigrationState in that two
files.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Historically the migration data channel has only needed to be
unidirectional. Thus the 'exec:' protocol was requesting an
I/O channel with O_RDONLY on incoming side, and O_WRONLY on
the outgoing side.
This is fine for classic migration, but if you then try to run
TLS over it, this fails because the TLS handshake requires a
bi-directional channel.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Both the ram bitmap and the unsent bitmap are split by RAMBlock.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Fix compilation when DEBUG_POSTCOPY is enabled (thanks Hailiang)
Commit d35ff5e6 ('block: Ignore guest dev permissions during incoming
migration') added blk_resume_after_migration() to the precopy migration
path, but neglected to add it to the duplicated code that is used for
postcopy migration. This means that the guest device doesn't request the
necessary permissions, which ultimately led to failing assertions.
Add the missing blk_resume_after_migration() to the postcopy path.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
-----BEGIN PGP SIGNATURE-----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=EsZ5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20170421' into staging
migration/next for 20170421
# gpg: Signature made Fri 21 Apr 2017 11:28:13 BST
# gpg: using RSA key 0xF487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/juanquintela/tags/migration/20170421: (65 commits)
hmp: info migrate_parameters format tunes
hmp: info migrate_capability format tunes
migration: rename max_size to threshold_size
migration: set current_active_state once
virtio-rng: stop virtqueue while the CPU is stopped
migration: don't close a file descriptor while it can be in use
ram: Remove migration_bitmap_extend()
migration: Disable hotplug/unplug during migration
qdev: Move qdev_unplug() to qdev-monitor.c
qdev: Export qdev_hot_removed
qdev: qdev_hotplug is really a bool
migration: Remove MigrationState parameter from migration_is_idle()
ram: Use RAMBitmap type for coherence
ram: rename last_ram_offset() last_ram_pages()
ram: Use ramblock and page offset instead of absolute offset
ram: Change offset field in PageSearchStatus to page
ram: Remember last_page instead of last_offset
ram: Use page number instead of an address for the bitmap operations
ram: reorganize last_sent_block
ram: ram_discard_range() don't use the mis parameter
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In migration codes (especially in migration_thread()), max_size is used
in many place for the threshold value that we will start to do the final
flush and jump to the next stage to dump the whole rest things to
destination. However its name is confusing to first readers. Let's
rename it to "threshold_size" when proper and add a comment for it. No
functional change is made.
CC: Juan Quintela <quintela@redhat.com>
CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We set it right above this one. No need to set it twice.
CC: Juan Quintela <quintela@redhat.com>
CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
If we close the QEMUFile descriptor in process_incoming_migration_co()
while it has been stopped by an error, the postcopy_ram_listen_thread()
can try to continue to use it. And as the memory has been freed
it is working with an invalid pointer and crashes.
Fix this by releasing the memory after having managed the error
case (which, in fact, calls exit())
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit@kernel.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We have disabled memory hotplug, so we don't need to handle
migration_bitamp there.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Only user don't have a MigrationState handly.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This removes the needto pass also the absolute offset.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We are moving everything to work on pages, not addresses.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
--
Improve comment
Fix typo
We use an unsigned long for the page number. Notice that our bitmaps
already got that for the index, so we have that limit.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
rename page to page_abs everywhere.
fix trace types for pages
We were setting it far away of when we changed it. Now everything is
done inside save_page_header. Once there, reorganize code to pass
RAMState. We also set CONTINUE flag in a single place.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
We change the meaning of start to be the offset from the beggining of
the block.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The number of dirty pages is output in 'pages' in the command
'info migrate', so add page-size to calculate the number of dirty
pages in bytes.
Signed-off-by: Chao Fan <fanc.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It was used as a size in all cases except one.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Remove it from callers and callees.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
We need to call for the migrate_get_current() in more that half of the
uses, so call that inside.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
We can calculate its value, so we don't create a variable for it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
After Peter and Dave review, I dropped the variable and just inlined
the condition.
Fix typo
We receive the file from save_live operations and we don't use it
until 3 or 4 levels of calls down.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Treat it like the rest of ram stats counters. Export its value the
same way. As an added bonus, no more MigrationState used in
migration_bitmap_sync();
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Again, dave was the one reviewing it
It can be recalculated from dirty_pages_rate.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Dave was the one that reviewed it O:-)
This is a ram field that was inside MigrationState. Move it to
RAMState and make it the same that the other ram stats.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
This are the last postcopy fields still at MigrationState. Once there
Move MigrationSrcPageRequest to ram.c and remove MigrationState
parameters where appropiate.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
It was on MigrationState when it is only used inside ram.c for
postcopy. Problem is that we need to access it without being able to
pass it RAMState directly.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Just unfold it. Move ram_bytes_remaining() with the rest of exported
functions.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Somewhere it was passed by reference, just use it from RAMState.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Once there, rename the type to be shorter.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
And then init only things that are not zero by default.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Once there, remove the now unused AccountingInfo struct and var.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Comment why we need bytes and pages
Its value can be calculated by other exported.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
For compatibility, we need to still send a value, but just specify it
and comment the fact.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Once there rename it to its actual meaning, zero_pages.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Renamed start_time to time_last_bitmap_sync(peterx suggestion)
We need to add a parameter to several functions to make this work.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
We create a struct where to put all the ram state
Start with the following fields:
last_seen_block, last_sent_block, last_offset, last_version and
ram_bulk_stage are globals that are really related together.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Fix typo and warnings
So all places are consistent on the naming of a block name parameter.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It reflects better what it does.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Added doc comments for existing functions comment and rewrite them in
a common style.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Fix Peter Xu comments
Improve postcopy comments as per reviews.
BLOCK_SIZE is (1 << 20), qcow2 cluster size is 65536 by default,
this may cause the qcow2 file size to be bigger after migration.
This patch checks each cluster, using blk_pwrite_zeroes for each
zero cluster.
[Initialize cluster_size to BLOCK_SIZE to prevent a gcc uninitialized
variable compiler warning. In reality we always initialize cluster_size
in a conditional but gcc doesn't know that.
--Stefan]
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Message-id: 1492050868-16200-1-git-send-email-lidongchen@tencent.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Usually guest devices don't like other writers to the same image, so
they use blk_set_perm() to prevent this from happening. In the migration
phase before the VM is actually running, though, they don't have a
problem with writes to the image. On the other hand, storage migration
needs to be able to write to the image in this phase, so the restrictive
blk_set_perm() call of qdev devices breaks it.
This patch flags all BlockBackends with a qdev device as
blk->disable_perm during incoming migration, which means that the
requested permissions are stored in the BlockBackend, but not actually
applied to its root node yet.
Once migration has finished and the VM should be resumed, the
permissions are applied. If they cannot be applied (e.g. because the NBD
server used for block migration hasn't been shut down), resuming the VM
fails.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Postcopy doesn't support migration of RAM shared with another process
yet (we've got a bunch of things to understand).
Check for the case and don't allow postcopy to be enabled.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This problem affects s390x only if we are running without KVM.
Basically, S390CPU.irqstate is unused if we do not use KVM,
and thus no buffer is allocated.
This causes size=0, first_elem=NULL and n_elems=1 in
vmstate_load_state and vmstate_save_state. And the assert fails.
With this fix we can go back to the old behavior and support
VMS_VBUFFER with size 0 and nullptr.
Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Increase bmds->cur_dirty after submit io, so reduce the frequency
involve into blk_drain, and improve the performance obviously
when block migration.
The performance test result of this patch:
During the block dirty save phase, this patch improve guest os IOPS
from 4.0K to 9.5K. and improve the migration speed from
505856 rsec/s to 855756 rsec/s.
Signed-off-by: Lidong Chen <jemmy858585@gmail.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The tls-creds parameter has a default value of NULL indicating
that TLS should not be used. Setting it to non-NULL enables
use of TLS. Once tls-creds are set to a non-NULL value via the
monitor, it isn't possible to set them back to NULL again, due
to current implementation limitations. The empty string is not
a valid QObject identifier, so this switches to use "" as the
default, indicating that TLS will not be used
The tls-hostname parameter has a default value of NULL indicating
the the hostname from the migrate connection URI should be used.
Again, once tls-hostname is set non-NULL, to override the default
hostname for x509 cert validation, it isn't possible to reset it
back to NULL via the monitor. The empty string is not a valid
hostname, so this switches to use "" as the default, indicating
that the migrate URI hostname should be used.
Using "" as the default for both, also means that the monitor
commands "info migrate_parameters" / "query-migrate-parameters"
will report existance of tls-creds/tls-parameters even when set
to their default values.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In function cpu_physical_memory_sync_dirty_bitmap, file
include/exec/ram_addr.h:
if (src[idx][offset]) {
unsigned long bits = atomic_xchg(&src[idx][offset], 0);
unsigned long new_dirty;
new_dirty = ~dest[k];
dest[k] |= bits;
new_dirty &= bits;
num_dirty += ctpopl(new_dirty);
}
After these codes executed, only the pages not dirtied in bitmap(dest),
but dirtied in dirty_memory[DIRTY_MEMORY_MIGRATION] will be calculated.
For example:
When ram_list.dirty_memory[DIRTY_MEMORY_MIGRATION] = 0b00001111,
and atomic_rcu_read(&migration_bitmap_rcu)->bmap = 0b00000011,
the new_dirty will be 0b00001100, and this function will return 2 but not
4 which is expected.
the dirty pages in dirty_memory[DIRTY_MEMORY_MIGRATION] are all new,
so these should be calculated also.
Signed-off-by: Chao Fan <fanc.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Migration is the only code left in the tree that does not react
to bdrv_is_allocated() failures. But as there is no useful way
to react to the failure, and we are merely skipping unallocated
sectors on success, just document that our choice of handling
is intended.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Note: The 'postcopy: Update userfaultfd.h header' is part of
Paolo's header update and will disappear if applied after it.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=PCYv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20170228a' into staging
Migration pull
Note: The 'postcopy: Update userfaultfd.h header' is part of
Paolo's header update and will disappear if applied after it.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Tue 28 Feb 2017 12:38:34 GMT
# gpg: using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20170228a: (27 commits)
postcopy: Add extra check for COPY function
postcopy: Add doc about hugepages and postcopy
postcopy: Check for userfault+hugepage feature
postcopy: Update userfaultfd.h header
postcopy: Allow hugepages
postcopy: Send whole huge pages
postcopy: Mask fault addresses to huge page boundary
postcopy: Load huge pages in one go
postcopy: Use temporary for placing zero huge pages
postcopy: Plumb pagesize down into place helpers
postcopy: Record largest page size
postcopy: enhance ram_block_discard_range for hugepages
exec: ram_block_discard_range
postcopy: Chunk discards for hugepages
postcopy: Transmit and compare individual page sizes
postcopy: Transmit ram size summary word
migration: fix use-after-free of to_dst_file
migration: Update docs to discourage version bumps
migration: fix id leak regression
migrate: Introduce a 'dc->vmsd' check to avoid segfault for --only-migratable
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=g3ew
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Tue 28 Feb 2017 20:35:32 GMT
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (46 commits)
block: Add Error parameter to bdrv_append()
block: Add Error parameter to bdrv_set_backing_hd()
block: Assertions for resize permission
block: Assertions for write permissions
block: Pass BdrvChild to bdrv_aligned_preadv/pwritev and copy-on-read
tests: Remove FIXME comments
nbd/server: Use real permissions for NBD exports
migration/block: Use real permissions
hmp: Request permissions in qemu-io
commit: Add filter-node-name to block-commit
mirror: Add filter-node-name to blockdev-mirror
stream: Use real permissions in streaming block job
mirror: Use real permissions in mirror/active commit block job
blockjob: Factor out block_job_remove_all_bdrv()
block: Allow backing file links in change_parent_backing_link()
block: BdrvChildRole.attach/detach() callbacks
block: Fix pending requests check in bdrv_append()
backup: Use real permissions in backup block job
commit: Use real permissions for HMP 'commit'
commit: Use real permissions in commit block job
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Request BLK_PERM_CONSISTENT_READ for the source of block migration, and
handle potential permission errors as good as we can in this place
(which is not very good, but it matches the other failure cases).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Now that blk_insert_bs() requests the BlockBackend permissions for the
node it attaches to, it can fail. Instead of aborting, pass the errors
to the callers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
We want every user to be specific about the permissions it needs, so
we'll pass the initial permissions as parameters to blk_new(). A user
only needs to call blk_set_perm() if it wants to change the permissions
after the fact.
The permissions are stored in the BlockBackend and applied whenever a
BlockDriverState should be attached in blk_insert_bs().
This does not include actually choosing the right set of permissions
everywhere yet. Instead, the usual FIXME comment is added to each place
and will be addressed in individual patches.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
We can call this qmp command to do checkpoint outside of qemu.
Xen colo will need this function.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wencongyang@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
We can call this qmp command to start/stop replication outside of qemu.
Like Xen colo need this function.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wencongyang@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
As an extra sanity check, make sure the region we're registering
can perform UFFDIO_COPY; the COPY will fail later but this
gives a cleaner failure.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-17-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We need extra Linux kernel support (~4.11) to support userfaults
on hugetlbfs; check for them.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-15-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Allow huge pages in postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-13-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The RAM save code uses ram_save_host_page to send whole
host pages at a time; change this to use the host page size associated
with the RAM Block which may be a huge page.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-12-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently the fault address received by userfault is rounded to
the host page boundary and a host page is requested from the source.
Use the current RAMBlock page size instead of the general host page
size so that for RAMBlocks backed by huge pages we request the whole
huge page.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-11-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The existing postcopy RAM load loop already ensures that it
glues together whole host-pages from the target page size chunks sent
over the wire. Modify the definition of host page that it uses
to be the RAM block page size and thus be huge pages where appropriate.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-10-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The kernel can't do UFFDIO_ZEROPAGE for huge pages, so we have
to allocate a temporary (always zero) page and use UFFDIO_COPYPAGE
on it.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-9-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Now we deal with normal size pages and huge pages we need
to tell the place handlers the size we're dealing with
and make sure the temporary page is large enough.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-8-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Record the largest page size in use; we'll need it soon for allocating
temporary buffers.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-7-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Create ram_block_discard_range in exec.c to replace
postcopy_ram_discard_range and most of ram_discard_range.
Those two routines are a bit of a weird combination, and
ram_discard_range is about to get more complex for hugepages.
It's OS dependent code (so shouldn't be in migration/ram.c) but
it needs quite a bit of the innards of RAMBlock so doesn't belong in
the os*.c.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-5-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
At the start of the postcopy phase, partially sent huge pages
must be discarded. The code for dealing with host page sizes larger
than the target page size can be reused for this case.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-4-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When using postcopy with hugepages, we require the source
and destination page sizes for any RAMBlock to match; note
that different RAMBlocks in the same VM can have different
page sizes.
Transmit them as part of the RAM information header and
fail if there's a difference.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170224182844.32452-3-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Replace the host page-size in the 'advise' command by a pagesize
summary bitmap; if the VM is just using normal RAM then
this will be exactly the same as before, however if they're using
huge pages they'll be different, and thus:
a) Migration from/to old qemu's that don't understand huge pages
will fail early.
b) Migrations with different size RAMBlocks will also fail early.
This catches it very early; earlier than the detailed per-block
check in the next patch.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170224182844.32452-2-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
hmp_savevm calls qemu_savevm_state(f), which sets to_dst_file=f in
global migration state. Then hmp_savevm closes f (g_free called).
Next access to to_dst_file in migration state (for example,
qmp_migrate_set_speed) will use it after it was freed.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170225193155.447462-5-vsementsov@virtuozzo.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This leak was introduced in commit
581f08bac2.
(it stands out quickly with ASAN once the rest of the leaks are also
removed from make check with this series)
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170221141451.28305-31-marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit a3a3d8c7 introduced a segfault bug while checking for
'dc->vmsd->unmigratable' which caused QEMU to crash when trying to add
devices which do no set their 'dc->vmsd' yet while initialization.
Place a 'dc->vmsd' check prior to it so that we do not segfault for
such devices.
NOTE: This doesn't compromise the functioning of --only-migratable
option as all the unmigratable devices do set their 'dc->vmsd'.
Introduce a new function check_migratable() and move the
only_migratable check inside it, also use stubs to avoid user-mode qemu
build failures.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1487009088-23891-1-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Make VMS_ARRAY_OF_POINTER cope with null pointers. Previously the
reward for trying to migrate an array with some null pointers in it was
an illegal memory access, that is a swift and painless death of the
process. Let's make vmstate cope with this scenario.
The general approach is, when we encounter a null pointer (element),
instead of following the pointer to save/load the data behind it, we
save/load a placeholder. This way we can detect if we expected a null
pointer at the load side but not null data was saved instead.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170222160119.52771-4-pasic@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently vmstate_base_addr does several things: it pinpoints the field
within the struct, possibly allocates memory and possibly does the first
pointer dereference. Obviously allocation is needed only for load.
Let us split up the functionality in vmstate_base_addr and move the
address manipulations (that is everything but the allocation logic) to
load and save so it becomes more obvious what is actually going on. Like
this all the address calculations (and the handling of the flags
controlling these) is in one place and the sequence is more obvious.
The newly introduced function vmstate_handle_alloc also fixes the
allocation for the unused VMS_VBUFFER|VMS_MULTIPLY|VMS_ALLOC scenario
and is substantially simpler than the original vmstate_base_addr.
In load and save some asserts are added so it's easier to debug
situations where we would end up with a null pointer dereference.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170222160119.52771-3-pasic@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The vmstate_(load|save)_state start out with an a void *opaque pointing
to some struct, and manipulate one or more elements of one field within
that struct.
First the field within the struct is pinpointed as opaque + offset, then
if this is a pointer the pointer is dereferenced to obtain a pointer to
the first element of the vmstate field. Pointers to further elements if
any are calculated as first_element + i * element_size (where i is the
zero based index of the element in question).
Currently base_addr and addr is used as a variable name for the pointer
to the first element and the pointer to the current element being
processed. This is suboptimal because base_addr is somewhat
counter-intuitive (because obtained as base + offset) and both base_addr
and addr not very descriptive (that we have a pointer should be clear
from the fact that it is declared as a pointer).
Let make things easier to understand by renaming base_addr to first_elem
and addr to curr_elem. This has the additional benefit of harmonizing
with other names within the scope (n_elems, vmstate_n_elems).
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170222160119.52771-2-pasic@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Using QMP, the error message of 'migrate_set_downtime' was displaying
the values in milliseconds, being misleading with the command that
accepts the value in seconds:
{ "execute": "migrate_set_downtime", "arguments": {"value": 3000}}
{"error": {"class": "GenericError", "desc": "Parameter 'downtime_limit'
expects an integer in the range of 0 to 2000000 milliseconds"}}
This message is also seen in HMP when trying to set the same
parameter:
(qemu) migrate_set_parameter downtime-limit 3000000
Parameter 'downtime_limit' expects an integer in the range of 0 to
2000000 milliseconds
To allow for a proper error message when using QMP, a validation
of the user input was added in 'qmp_migrate_set_downtime'.
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Message-Id: <20170222151729.5812-1-danielhb@linux.vnet.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
VMSTATE_WITH_TMP is for handling structures where some calculation
or rearrangement of the data needs to be performed before the data
hits the wire.
For example, where the value on the wire is an offset from a
non-migrated base, but the data in the structure is the actual pointer.
To use it, a temporary type is created and a vmsd used on that type.
The first element of the type must be 'parent' a pointer back to the
type of the main structure. VMSTATE_WITH_TMP takes care of allocating
and freeing the temporary before running the child vmsd.
The post_load/pre_save on the child vmsd can copy things from the parent
to the temporary using the parent pointer and do any other calculations
needed; it can then use normal VMSD entries to do the actual data
storage without having to fiddle around with qemu_get_*/qemu_put_*
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170203160651.19917-3-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We should not do failover work while the main thread is loading
VM's state. Otherwise the consistent of VM's memory and
device state will be broken.
We will restart the loading process after jump over the stage,
The new failover status 'RELAUNCH' will help to record if we
need to restart the process.
Cc: Eric Blake <eblake@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1484657864-21708-4-git-send-email-zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Added a missing '(Since 2.9)'
If the net connection between primary host and secondary host breaks
while COLO/COLO incoming threads are doing read() or write().
It will block until connection is timeout, and the failover process
will be blocked because of it.
So it is necessary to shutdown all the socket fds used by COLO
to avoid this situation. Besides, we should close the corresponding
file descriptors after failvoer BH shutdown them,
Or there will be an error.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1484657864-21708-3-git-send-email-zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If we set checkpoint-delay through command 'migrate-set-parameters',
It will not take effect until we finish last sleep chekpoint-delay,
That's will be offensive espeically when we want to change its value
from an extreme big one to a proper value.
Fix it by using timer to realize checkpoint-delay.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-Id: <1484657864-21708-2-git-send-email-zhang.zhanghailiang@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The member VMStateField.start is used for two things, partial data
migration for VBUFFER data (basically provide migration for a
sub-buffer) and for locating next in QTAILQ.
The implementation of the VBUFFER feature is broken when VMSTATE_ALLOC
is used. This however goes unnoticed because actually partial migration
for VBUFFER is not used at all.
Let's consolidate the usage of VMStateField.start by removing support
for partial migration for VBUFFER.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170203175217.45562-1-pasic@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Migration of a "none" machine with no RAM crashes abruptly as
bitmap_new() fails and thus aborts. Instead place zero RAM checks at
appropriate places to skip migration of RAM in this case and complete
migration successfully for devices only.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1486564125-31366-1-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
After the start of postcopy migration there are some non-dirty pages which have
already been migrated. These pages are no longer needed on the source vm so that
we can free them and it doen't hurt to complete the migration.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Message-Id: <20170203152321.19739-4-pbutsykin@virtuozzo.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This feature frees the migrated memory on the source during postcopy-ram
migration. In the second step of postcopy-ram migration when the source vm
is put on pause we can free unnecessary memory. It will allow, in particular,
to start relaxing the memory stress on the source host in a load-balancing
scenario.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Message-Id: <20170203152321.19739-3-pbutsykin@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Manually merged in Pavel's 'migration: madvise error_report fixup!'
Cosmetic patch. The use of ms variable instead of migrate_get_current()
looks nicer, especially when there reuse.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Message-Id: <20170203152321.19739-2-pbutsykin@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
An early postcopy failure can be recovered from as long as we know
we haven't sent the command to run the destination.
We have to undo the bdrv_inactivate_all by calling
bdrv_invalidate_cache_all
Note that I'm not using ms->block_inactive because once we've
sent the postcopy package we dont want anything else to try
and recover the block storage on the source; the destination
might have started writing to it.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170202155909.31784-3-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
On a destination host with no userfault support an incoming
postcopy would cause the state to enter ADVISE before
it realised there was no support, and because it was in ADVISE
state it would perform a cleanup at the end. Since there
was no support the cleanup function should be unreachable,
but ends up being called and asserting.
Reset the state when we realise we have no support, thus the
cleanup doesn't happen.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170202155909.31784-2-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The qdev id of a device can be huge if it's on the end of a chain
of bridges; in reality such chains shouldn't occur but they can
be made to by chaining PCIe bridges together.
The migration format has a number of 256 character long format
limits; check we don't hit them (we already use pstrcat/cpy but
that just protects us from buffer overruns, we fairly quickly
hit an assert).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170202125956.21942-3-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
I'll be adding an error to it in a subsequent patch.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170202125956.21942-2-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1485207141-1941-3-git-send-email-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
There are a number of unused trace events that
scripts/cleanup-trace-events.pl finds. The "hw/vfio/pci-quirks.c"
filename was typoed and "qapi/qapi-visit-core.c" was missing the qapi/
directory prefix.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170126171613.1399-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch introduces save_vmstate function to allow saving and loading
vmstates from the replay module.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20170124071741.4572.13714.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add some tracing to vmstate_subsection_save and vmstate_save_state
to help in debugging when you're not sure if a conditional piece
of data is being saved.
In vmstate_subsection_save I renamed the inner vmsd to avoid the aliasing
and be able to print both names.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20161212125838.14425-1-dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
So we can remove DPRINTF() macro
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1485207141-1941-2-git-send-email-quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixed up 'remained/remaining' as requested by Eric
Change the name of live migration thread from 'migration'
to 'live_migration' to identify it clearly. 'migration'
is a generic word and kernel also has tasks for process
migration with the name 'migration/cpu#'.
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Message-Id: <1485178976-15225-1-git-send-email-pagupta@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
commit fe904ea824 fixed a case
which migration aborted QEMU because it didn't regain the control
of images while some errors happened.
Actually, there are another two cases can trigger the same error reports:
" bdrv_co_do_pwritev: Assertion `!(bs->open_flags & 0x0800)' failed",
Case 1, codes path:
migration_thread()
migration_completion()
bdrv_inactivate_all() ----------------> inactivate images
qemu_savevm_state_complete_precopy()
socket_writev_buffer() --------> error because destination fails
qemu_fflush() ----------------> set error on migration stream
-> qmp_migrate_cancel() ----------------> user cancelled migration concurrently
-> migrate_set_state() ------------------> set migrate CANCELLIN
migration_completion() -----------------> go on to fail_invalidate
if (s->state == MIGRATION_STATUS_ACTIVE) -> Jump this branch
Case 2, codes path:
migration_thread()
migration_completion()
bdrv_inactivate_all() ----------------> inactivate images
migreation_completion() finished
-> qmp_migrate_cancel() ---------------> user cancelled migration concurrently
qemu_mutex_lock_iothread();
qemu_bh_schedule (s->cleanup_bh);
As we can see from above, qmp_migrate_cancel can slip in whenever
migration_thread does not hold the global lock. If this happens after
bdrv_inactive_all() been called, the above error reports will appear.
To prevent this, we can call bdrv_invalidate_cache_all() in qmp_migrate_cancel()
directly if we find images become inactive.
Besides, bdrv_invalidate_cache_all() in migration_completion() doesn't have the
protection of big lock, fix it by add the missing qemu_mutex_lock_iothread();
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-Id: <1485244792-11248-1-git-send-email-zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
migrate_add_blocker should rightly fail if the '--only-migratable'
option was specified and the device in use should not be able to
perform the action which results in an unmigratable VM.
Make migrate_add_blocker return -EACCES in this case.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1484566314-3987-6-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If a migration is already in progress and somebody attempts
to add a migration blocker, this should rightly fail.
Add an errp parameter and a retcode return value to migrate_add_blocker.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1484566314-3987-5-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Merged with recent 'Allow invtsc migration' change
Added error_report where version_ids do not match in vmstate_load_state.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com>
Message-Id: <1484852453-12728-5-git-send-email-duanj@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently we cannot directly transfer a QTAILQ instance because of the
limitation in the migration code. Here we introduce an approach to
transfer such structures. We created VMStateInfo vmstate_info_qtailq
for QTAILQ. Similar VMStateInfo can be created for other data structures
such as list.
When a QTAILQ is migrated from source to target, it is appended to the
corresponding QTAILQ structure, which is assumed to have been properly
initialized.
This approach will be used to transfer pending_events and ccs_list in spapr
state.
We also create some macros in qemu/queue.h to access a QTAILQ using pointer
arithmetic. This ensures that we do not depend on the implementation
details about QTAILQ in the migration code.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com>
Message-Id: <1484852453-12728-3-git-send-email-duanj@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Current migration code cannot handle some data structures such as
QTAILQ in qemu/queue.h. Here we extend the signatures of put/get
in VMStateInfo so that customized handling is supported. put now
will return int type.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com>
Message-Id: <1484852453-12728-2-git-send-email-duanj@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently the QIOTaskFunc signature takes an Object * for
the source, and an Error * for any error. We also need to
be able to provide a result pointer. Rather than continue
to add parameters to QIOTaskFunc, remove the existing
ones and simply pass the QIOTask object instead. This
has methods to access all the other data items required
in the callback impl.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
During migration, save state entries are saved/loaded without a specific
order - we just traverse the savevm_state.handlers list and do it one by
one. This might not be enough.
There are requirements that we need to load specific device's vmstate
first before others. For example, VT-d IOMMU contains DMA address
remapping information, which is required by all the PCI devices to do
address translations. We need to make sure IOMMU's device state is
loaded before the rest of the PCI devices, so that DMA address
translation can work properly.
This patch provide a VMStateDescription.priority value to allow specify
the priority of the saved states. The loadvm operation will be done with
those devices with higher vmsd priority.
Before this patch, we are possibly achieving the ordering requirement by
an assumption that the ordering will be the same with the ordering that
objects are created. A better way is to mark it out explicitly in the
VMStateDescription table, like what this patch does.
Current ordering logic is still naive and slow, but after all that's not
a critical path so IMO it's a workable solution for now.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
qemu_savevm_state_iterate() expects the iterators to return 1
when they are done, and 0 if there is still something left to do.
However, ram_save_iterate() does not obey this rule and returns
the number of saved pages instead. This causes a fatal hang with
ppc64 guests when you run QEMU like this (also works with TCG):
qemu-img create -f qcow2 /tmp/test.qcow2 1M
qemu-system-ppc64 -nographic -nodefaults -m 256 \
-hda /tmp/test.qcow2 -serial mon:stdio
... then switch to the monitor by pressing CTRL-a c and try to
save a snapshot with "savevm test1" for example.
After the first iteration, ram_save_iterate() always returns 0 here,
so that qemu_savevm_state_iterate() hangs in an endless loop and you
can only "kill -9" the QEMU process.
Fix it by using proper return values in ram_save_iterate().
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We forgot to assign true to params->has_x_checkpoint_delay parameter
in qmp_query_migrate_parameters.
Without this, qmp command 'query-migrate-parameters' doesn't show the
default value for x-checkpoint-delay option.
This also fixes the fact that HMP was relying on unspecified behavior by
reading x_checkpoint_delay without checking has_x_checkpoint_delay.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Some older GCC versions (e.g. 4.4.7) report a warning on an
uninitialized variable for 'request', even though all possible code
paths that reference 'request' will be initialized. To appease
these versions, initialize the variable to 0.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-id: 259818682e41b95ae60f1423b87954a3fe377639.1477950393.git.jcody@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=sur7
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amit-migration/tags/migration-for-2.8' into staging
Migration bits from the COLO project
# gpg: Signature made Sun 30 Oct 2016 10:39:55 GMT
# gpg: using RSA key 0xEB0B4DFC657EF670
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg: aka "Amit Shah <amit@kernel.org>"
# gpg: aka "Amit Shah <amitshah@gmx.net>"
# Primary key fingerprint: 48CA 3722 5FE7 F4A8 B337 2735 1E9A 3B5F 8540 83B6
# Subkey fingerprint: CC63 D332 AB8F 4617 4529 6534 EB0B 4DFC 657E F670
* remotes/amit-migration/tags/migration-for-2.8:
MAINTAINERS: Add maintainer for COLO framework related files
configure: Support enable/disable COLO feature
docs: Add documentation for COLO feature
COLO: Implement failover work for secondary VM
COLO: Implement the process of failover for primary VM
COLO: Introduce state to record failover process
COLO: Add 'x-colo-lost-heartbeat' command to trigger failover
COLO: Synchronize PVM's state to SVM periodically
COLO: Add checkpoint-delay parameter for migrate-set-parameters
COLO: Load VMState into QIOChannelBuffer before restore it
COLO: Send PVM state to secondary side when do checkpoint
COLO: Add a new RunState RUN_STATE_COLO
COLO: Introduce checkpointing protocol
COLO: Establish a new communicating path for COLO
migration: Switch to COLO process after finishing loadvm
migration: Enter into COLO mode after migration if COLO is enabled
COLO: migrate COLO related info to secondary node
migration: Introduce capability 'x-colo' to migration
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
configure --enable-colo/--disable-colo to switch COLO
support on/off.
COLO feature doesn't depend on any other external libraries,
So here it is reasonable to enable COLO by default, to
avoid re-compile QEMU if users want to use this capability.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
If users require SVM to takeover work, COLO incoming thread should
exit from loop while failover BH helps backing to migration incoming
coroutine.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
For primary side, if COLO gets failover request from users.
To be exact, gets 'x_colo_lost_heartbeat' command.
COLO thread will exit the loop while the failover BH does the
cleanup work and resumes VM.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
When handling failover, COLO processes differently according to
the different stage of failover process, here we introduce a global
atomic variable to record the status of failover.
We add four failover status to indicate the different stage of failover process.
You should use the helpers to get and set the value.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
We leave users to choose whatever heartbeat solution they want,
if the heartbeat is lost, or other errors they detect, they can use
experimental command 'x_colo_lost_heartbeat' to tell COLO to do failover,
COLO will do operations accordingly.
For example, if the command is sent to the Primary side,
the Primary side will exit COLO mode, does cleanup work,
and then, PVM will take over the service work. If sent to the Secondary side,
the Secondary side will run failover work, then takes over PVM's service work.
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
Do checkpoint periodically, the default interval is 200ms.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
Add checkpoint-delay parameter for migrate-set-parameters, so that
we can control the checkpoint frequency when COLO is in periodic mode.
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
We should not destroy the state of SVM (Secondary VM) until we receive
the complete data of PVM's state, in case the primary fails in the process
of sending the state, so we cache the VM's state in secondary side before
load it into SVM.
Besides, we should call qemu_system_reset() before load VM state,
which can ensure the data is intact.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
VM checkpointing is to synchronize the state of PVM to SVM, just
like migration does, we re-use save helpers to achieve migrating
PVM's state to Secondary side.
COLO need to cache the data of VM's state in the secondary side before
synchronize it to SVM. COLO need the size of the data to determine
how much data should be read in the secondary side.
So here, we can get the size of the data by saving it into I/O channel
before send it to the secondary side.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
We need communications protocol of user-defined to control
the checkpointing process.
The new checkpointing request is started by Primary VM,
and the interactive process like below:
Checkpoint synchronizing points:
Primary Secondary
initial work
'checkpoint-ready' <-------------------- @
'checkpoint-request' @ -------------------->
Suspend (Only in hybrid mode)
'checkpoint-reply' <-------------------- @
Suspend&Save state
'vmstate-send' @ -------------------->
Send state Receive state
'vmstate-received' <-------------------- @
Release packets Load state
'vmstate-load' <-------------------- @
Resume Resume (Only in hybrid mode)
Start Comparing (Only in hybrid mode)
NOTE:
1) '@' who sends the message
2) Every sync-point is synchronized by two sides with only
one handshake(single direction) for low-latency.
If more strict synchronization is required, a opposite direction
sync-point should be added.
3) Since sync-points are single direction, the remote side may
go forward a lot when this side just receives the sync-point.
4) For now, we only support 'periodic' checkpoint, for which
the Secondary VM is not running, later we will support 'hybrid' mode.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
This new communication path will be used for returning messages
from Secondary side to Primary side.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
Switch from normal migration loadvm process into COLO checkpoint process if
COLO mode is enabled.
We add three new members to struct MigrationIncomingState,
'have_colo_incoming_thread' and 'colo_incoming_thread' record the COLO
related thread for secondary VM, 'migration_incoming_co' records the
original migration incoming coroutine.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
Add a new migration state: MIGRATION_STATUS_COLO. Migration source side
enters this state after the first live migration successfully finished
if COLO is enabled by command 'migrate_set_capability x-colo on'.
We reuse migration thread, so the process of checkpointing will be handled
in migration thread.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
We can determine whether or not VM in destination should go into COLO mode
by referring to the info that was migrated.
We skip this section if COLO is not enabled (i.e.
migrate_set_capability colo off), so that, It doesn't break compatibility
with migration no matter whether users configure the --enable-colo/disable-colo
on the source/destination side or not;
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
We add helper function colo_supported() to indicate whether
colo is supported or not, with which we use to control whether or not
showing 'x-colo' string to users, they can use qmp command
'query-migrate-capabilities' or hmp command 'info migrate_capabilities'
to learn if colo is supported.
The default value for COLO (COarse-Grain LOck Stepping) is disabled.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
All the callers of migrate_fd_error() pass a non-NULL
error parameter, and if any did pass NULL then we would
segfault in error_copy(), so remove the unnecessary
NULL check earlier in the function.
(Spotted by Coverity.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
-----BEGIN PGP SIGNATURE-----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=gsxL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange/tags/pull-qio-2016-10-27-1' into staging
Merge qio 2016/10/27 v1
# gpg: Signature made Thu 27 Oct 2016 13:54:03 BST
# gpg: using RSA key 0xBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/pull-qio-2016-10-27-1:
main: set names for main loop sources created
vnc: set name for all I/O channels created
migration: set name for all I/O channels created
char: set name for all I/O channels created
nbd: set name for all I/O channels created
io: add ability to set a name for IO channels
io: Add a QIOChannelSocket cleanup test
io: set LISTEN flag explicitly for listen sockets
io: Introduce a qio_channel_set_feature() helper
io: Use qio_channel_has_feature() where applicable
io: Fix double shift usages on QIOChannel features
Conflicts:
qemu-char.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Ensure that all I/O channels created for migration are given names
to distinguish their respective roles.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a subsection to vmstate_configuration which is present
only if the guest is using a target page size which is
different from the default. This allows us to helpfully
diagnose attempts to migrate between machines which
are using different target page sizes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Allocate xzblre zero page cache buffer dynamically.
Remove dependency on TARGET_PAGE_SIZE to make run-time
page size detection for arm platforms.
Signed-off-by: Vijaya Kumar K <vijayak@cavium.com>
Message-id: 1465808915-4887-2-git-send-email-vijayak@caviumnetworks.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark the old commands 'migrate_set_speed' and 'migrate_set_downtime' as
deprecated.
Move max-bandwidth and downtime-limit into migrate-set-parameters for
setting maximum migration speed and expected downtime limit parameters
respectively.
Change downtime units to milliseconds (only for new-command) and set
its upper bound limit to 2000 seconds.
Update the query part in both hmp and qmp qemu control interfaces.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The command :
migrate tcp:localhost:
currently segs; fix it so it now says:
error parsing address 'localhost:'
and the same for -incoming.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
At the moment postcopy will fail as soon as qemu tries to register
userfault on the RAMBlock pages that are backed by hugepages.
However, the kernel is going to get userfault support for hugepage
at some point, and we've not got the rest of the QEMU code to support
it yet, so fail neatly with an error like:
Postcopy doesn't support hugetlbfs yet (/objects/mem1)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
xbzrle relies on reading pages that have already been sent
to the destination and then applying the modifications; we can't
do that in postcopy because the destination may well have
modified the page already or the page has been discarded.
I already didn't allow reception of xbzrle pages, but I
forgot to add the test to stop them being sent.
Enabling both xbzrle and postcopy can make some sense;
if you think that your migration might finish if you
have xbzrle, then when it doesn't complete you flick
over to postcopy and stop xbzrle'ing.
This corresponds to RH bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1368422
Symptom is:
Unknown combination of migration flags: 0x60 (postcopy mode)
(either 0x60 or 0x40)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch fixes the out-of-bounds check of migration parameters in
qmp_migrate_set_parameters() for cpu-throttle-initial and
cpu-throttle-increment by adding a return statement for both as they
were broken since their introduction in 2.5 via commit 1626fee.
Due to the missing return statements, parameters were getting set to
out-of-bounds values despite the error.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Now that QAPI makes it easy to pass a struct around, we don't
have to declare as many parameters or local variables.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It is rather verbose, and slightly error-prone, to repeat
the same set of parameters for input (migrate-set-parameters)
as for output (query-migrate-parameters), where the only
difference is whether the members are optional. We can just
document that the optional members will always be present
on output, and then share a common struct between both
commands. The next patch can then reduce the amount of
code needed on input.
Also, we made a mistake in qemu 2.7 of returning an empty
string during 'query-migrate-parameters' when there is no
TLS, rather than omitting TLS details entirely. Technically,
this change risks breaking any 2.7 client that is hard-coded
to expect the parameter's existence; on the other hand, clients
that are portable to 2.6 already must be prepared for those
members to not be present.
And this gets rid of yet one more place where the QMP output
visitor is silently converting a NULL string into "" (which
is a hack I ultimately want to kill off).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
If the other side tells us there's been an error and we fail
the migration, we don't need to signal that failure to the other
side because it already knew.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael R. Hines <michael@hinespot.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
If an error occurs in a section load, set the file error flag
so that the transport can get notified to do a cleanup.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael R. Hines <michael@hinespot.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
If we fail for some reason (e.g. a mismatched RAMBlock)
and it's set the qemu_file error flag, pass that error back to the
peer so it can clean up rather than waiting for some higher level
progress.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael R. Hines <michael@hinespot.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Report the values when a comparison fails; together with
the previous patch that prints the device and field names
this should give a good idea of why loading the migration failed.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When a field fails to load (typically due to a limit
check, or a call to a get/put) report the device and field
to give an indication of the cause.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Migrating a VM during reboot sometimes results in differences
between the source and destination in the SMRAM area.
This is because migration_bitmap_sync() only fetches from KVM
the dirty log of address_space_memory. SMRAM memory slots
are ignored and the modifications to SMRAM are not sent to the
destination.
Reported-by: He Rongguang <herongguang.he@huawei.com>
Reviewed-by: He Rongguang <herongguang.he@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the two users don't make use of the returned offset,
beyond ensuring that the entire buffer is zero, consider the
can_use_buffer_find_nonzero_offset and buffer_find_nonzero_offset
functions internal.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1472496380-19706-4-git-send-email-rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Code of inet socket & unix socket is merged together.
Also add some newlines, make code block well separated.
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Message-Id: <1469696074-12744-4-git-send-email-caoj.fnst@cn.fujitsu.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Because of commit 11808bb0c4, which remove some condition checks
of 'f->ops->writev_buffer', 'qemu_put_qemu_file' should be enhanced
to clear the 'f_src->iovcnt', or 'f_src->iovcnt' may exceed the
MAX_IOV_SIZE which will break live migration. This should be fixed.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reported-by: Jinshi Zhang <jinshi.c.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1470702146-24399-1-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
mmap man page:
"On success, mmap() returns a pointer to the mapped area. On error, the
value MAP_FAILED (that is, (void *) -1) is returned, and errno is set
to indicate the cause of the error."
The check in postcopy_get_tmp_page is definitely wrong and should be
fixed.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Amit Shah <amit.shah@redhat.com>
Message-Id: <1469785705-16670-1-git-send-email-den@openvz.org>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Message-Id: <1469776231-23820-1-git-send-email-caoj.fnst@cn.fujitsu.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Release the qstring allocated in qjson_new().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If a migration fails/is cancelled during the postcopy stage we currently
end up with the runstate as finish-migrate, where it should be post-migrate.
There's a small window in precopy where I think the same thing can
happen, but I've never seen it.
It rarely matters; the only postcopy case is if you restart a migration, which
again is a case that rarely matters in postcopy because it's only
safe to restart the migration if you know the destination hasn't
been running (which you might if you started the destination with -S
and hadn't got around to 'c' ing it before the postcopy failed).
Even then it's a small window but potentially you could hit if
there's a problem loading the devices on the destination.
This corresponds to:
https://bugzilla.redhat.com/show_bug.cgi?id=1355683
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1468601086-32117-1-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Currently, the output of 'info snapshots' shows fully available snapshots.
It's opaque, hides some snapshot information to users. It's not convenient
if users want to know more about all of snapshot information on every block
device via monitor.
Follow Kevin's and Max's proposals, The patch makes the output more detailed:
(qemu) info snapshots
List of snapshots present on all disks:
ID TAG VM SIZE DATE VM CLOCK
-- checkpoint-1 165M 2016-05-22 16:58:07 00:02:06.813
List of partial (non-loadable) snapshots on 'drive_image1':
ID TAG VM SIZE DATE VM CLOCK
1 snap1 0 2016-05-22 16:57:31 00:01:30.567
Signed-off-by: Lin Ma <lma@suse.com>
Message-id: 1467869164-26688-3-git-send-email-lma@suse.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently qemu uses snapshot id to determine whether a snapshot is fully
available, It causes incorrect output in some scenario.
For instance:
(qemu) info block
drive_image1 (#block113): /opt/vms/SLES12-SP1-JeOS-x86_64-GM/disk0.qcow2
(qcow2)
Cache mode: writeback
drive_image2 (#block349): /opt/vms/SLES12-SP1-JeOS-x86_64-GM/disk1.qcow2
(qcow2)
Cache mode: writeback
(qemu)
(qemu) info snapshots
There is no snapshot available.
(qemu)
(qemu) snapshot_blkdev_internal drive_image1 snap1
(qemu)
(qemu) info snapshots
There is no suitable snapshot available
(qemu)
(qemu) savevm checkpoint-1
(qemu)
(qemu) info snapshots
ID TAG VM SIZE DATE VM CLOCK
1 snap1 0 2016-05-22 16:57:31 00:01:30.567
(qemu)
$ qemu-img snapshot -l disk0.qcow2
Snapshot list:
ID TAG VM SIZE DATE VM CLOCK
1 snap1 0 2016-05-22 16:57:31 00:01:30.567
2 checkpoint-1 165M 2016-05-22 16:58:07 00:02:06.813
$ qemu-img snapshot -l disk1.qcow2
Snapshot list:
ID TAG VM SIZE DATE VM CLOCK
1 checkpoint-1 0 2016-05-22 16:58:07 00:02:06.813
The patch uses snapshot name instead of snapshot id to determine whether a
snapshot is fully available and uses '--' instead of snapshot id in output
because the snapshot id is not guaranteed to be the same on all images.
For instance:
(qemu) info snapshots
List of snapshots present on all disks:
ID TAG VM SIZE DATE VM CLOCK
-- checkpoint-1 165M 2016-05-22 16:58:07 00:02:06.813
Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1467869164-26688-2-git-send-email-lma@suse.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
In practice the entry argument is always known at creation time, and
it is confusing that sometimes qemu_coroutine_enter is used with a
non-NULL argument to re-enter a coroutine (this happens in
block/sheepdog.c and tests/test-coroutine.c). So pass the opaque value
at creation time, for consistency with e.g. aio_bh_new.
Mostly done with the following semantic patch:
@ entry1 @
expression entry, arg, co;
@@
- co = qemu_coroutine_create(entry);
+ co = qemu_coroutine_create(entry, arg);
...
- qemu_coroutine_enter(co, arg);
+ qemu_coroutine_enter(co);
@ entry2 @
expression entry, arg;
identifier co;
@@
- Coroutine *co = qemu_coroutine_create(entry);
+ Coroutine *co = qemu_coroutine_create(entry, arg);
...
- qemu_coroutine_enter(co, arg);
+ qemu_coroutine_enter(co);
@ entry3 @
expression entry, arg;
@@
- qemu_coroutine_enter(qemu_coroutine_create(entry), arg);
+ qemu_coroutine_enter(qemu_coroutine_create(entry, arg));
@ reentry @
expression co;
@@
- qemu_coroutine_enter(co, NULL);
+ qemu_coroutine_enter(co);
except for the aforementioned few places where the semantic patch
stumbled (as expected) and for test_co_queue, which would otherwise
produce an uninitialized variable warning.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move all trace-events for files in the migration/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-6-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use 'QemuMutex comp_done_lock' and 'QemuCond comp_done_cond' instead
of 'QemuMutex *comp_done_lock' and 'QemuCond comp_done_cond'. To keep
consistent with 'QemuMutex decomp_done_lock' and
'QemuCond comp_done_cond'.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-10-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The current code for multi-thread decompression is not clear,
especially in the aspect of using lock. Refine the code
to make it clear.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-9-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The current code for multi-thread compression is not clear,
especially in the aspect of using lock. Refine the code
to make it clear.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-8-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
quit_comp_thread and quit_decomp_thread are accessed by several
thread, it's better to protect them with locks. We use a per
thread flag to replace the global one, and the new flag is protected
by a lock.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-7-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Use qemu_put_compression_data to do the compression directly
instead of using do_compress_ram_page, avoid some data copy.
very small improvement, at the same time, add code to check
if the compression is successful.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-6-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Current qemu_put_compression_data can only work with no writable
QEMUFile, and can't work with the writable QEMUFile. But it does
not provide any measure to prevent users from using it with a
writable QEMUFile.
We should fix this flaw to make it works with writable QEMUFile.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Suggested-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1462433579-13691-5-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
page_buffer is set twice repeatedly, remove the previous set.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1462433579-13691-4-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
At the end of live migration and before vm_start() on the destination
side, we should make sure all the decompression tasks are finished, if
this can not be guaranteed, the VM may get the incorrect memory data,
or the updated memory may be overwritten by the decompression thread.
Add the code to fix this potential issue.
Suggested-by: David Alan Gilbert <dgilbert@redhat.com>
Suggested-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-3-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Recently, a bug related to multiple thread compression feature for
live migration is reported. The destination side will be blocked
during live migration if there are heavy workload in host and
memory intensive workload in guest, this is most likely to happen
when there is one decompression thread.
Some parts of the decompression code are incorrect:
1. The main thread receives data from source side will enter a busy
loop to wait for a free decompression thread.
2. A lock is needed to protect the decomp_param[idx]->start, because
it is checked in the main thread and is updated in the decompression
thread.
Fix these two issues by following the code pattern for compression.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reported-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Tested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-2-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The following sequence of operations fails:
virsh start vm
virsh snapshot-create vm
virshh save vm --file file
with the following error
error: Failed to save domain vm to file
error: internal error: unable to execute QEMU command 'migrate':
There's a migration process in progress
The problem is that qemu_savevm_state() calls migrate_init() which sets
migration state to MIGRATION_STATUS_SETUP and never cleaned it up.
This patch do the job.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Amit Shah <amit.shah@redhat.com>
Message-Id: <1466003203-26263-1-git-send-email-den@openvz.org>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
A couple of improvements to tracing that have come out of helping
people with migration problems:
* vmstate_n_elems trace the count/name - for when you have problems
getting array counts right
* vmstate_subsection_load_bad - add the idstr, for when you receive a
subsection you weren't expecting.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1465896986-16132-1-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The *_to_cpup() and cpu_to_*w() functions just compose a pointer
dereference with a byteswap. Instead use ld*_p() and st*_p(),
which handle potential pointer misalignment and avoid the need
to cast the pointer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1465574962-2710-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check
is bogus without a previous inclusion of sys/mman.h. Include it in
sysemu/os-posix.h and remove it from everywhere else.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Apply the following renames for starting incoming migration:
process_incoming_migration -> migration_fd_process_incoming
migration_set_incoming_channel -> migration_channel_process_incoming
migration_tls_set_incoming_channel -> migration_tls_channel_process_incoming
and for starting outgoing migration:
migration_set_outgoing_channel -> migration_channel_connect
migration_tls_set_outgoing_channel -> migration_tls_channel_connect
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1464776234-9910-3-git-send-email-berrange@redhat.com
Message-Id: <1464776234-9910-3-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Knowing whether the destination host supports migration with
postcopy can be tricky.
The destination doesn't need the capability set, however
if we set it then use the opportunity to do the test and
tell the user/management layer early.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1465816605-29488-7-git-send-email-dgilbert@redhat.com
Message-Id: <1465816605-29488-7-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
On the source, add a count of page requests received from the
destination.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-id: 1465816605-29488-4-git-send-email-dgilbert@redhat.com
Message-Id: <1465816605-29488-4-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The RAM section of qmp_query_migrate is reasonably complex
and repeated 3 times. Split it out into a helper.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1465816605-29488-3-git-send-email-dgilbert@redhat.com
Reviwed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <1465816605-29488-3-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The discard code in migration/ram.c would send request for
zero length discards in the case where no discards were needed.
It doesn't appear to have had any bad effect.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-id: 1465816605-29488-2-git-send-email-dgilbert@redhat.com
Message-Id: <1465816605-29488-2-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Introduce a "xen-load-devices-state" QAPI command that can be used to
load the state of all devices, but not the RAM or the block devices of
the VM.
We only have hmp commands savevm/loadvm, and qmp commands
xen-save-devices-state.
We use this new command for COLO:
1. suspend both primary vm and secondary vm
2. sync the state
3. resume both primary vm and secondary vm
In such case, we need to update all devices' state in any time.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
This creates a new BlockBackend for copying data from an images to the
migration stream on the source host. All I/O for block migration goes
through BlockBackend now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This converts the loading part of block migration to use BlockBackend
interfaces rather than accessing the BlockDriverState directly.
Note that this takes a lazy shortcut. We should really use a separate
BlockBackend that is configured for the migration rather than for the
guest (e.g. writethrough caching is unnecessary) and holds its own
reference to the BlockDriverState, but the impact isn't that big and we
didn't have a separate migration reference before either, so it must be
good enough, I guess...
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Rename to bdrv_pwrite_zeroes() to let the compiler ensure we
cater to the updated semantics. Do the same for bdrv_co_write_zeroes().
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Remove glib.h includes, as it is provided by osdep.h.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Of the two callers, one does not use it, and the other can compute
it itself based on the other output argument (offset) and the RAMBlock.
Reviewed-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a big refactoring of the migration backend code - moving away from
QEMUFile to the new QIOChannel framework introduced here. This brings a
good level of abstraction and reduction of many lines of code.
This series also adds the ability for many backends (all except RDMA) to
use TLS for encrypting the migration data between the endpoints.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJXRpKMAAoJEOsLTfxlfvZw2FMQAJmrp8ijvJNtdBa51bNY+xVx
zvrHDpWco/HxxqyBIGxG7g8Iq+wpNsdgoRxoQkfgIz9RkZiNrzb1kGRiqNFFBKFX
ziK1QQQ12ETUXwQ6VguBuwLDvCCenyUti0HfKkceG+Zu5263fyp+VzL+PuEtteT3
M0pZRrifj/TQqCBXR8yhBAo2dCiFETLVoruE+iNg2ipI3JDizxy8bdOU2gfnTayf
na7lE53pI+Wy8KE+qrhtsEgjHFp48uJ0HwQIIumvVndXFpIhRzCcN/aeVCjNYRjo
GeI18OJxcimRDwsnfuOwuZKhRcjWfa8WEIKsi8LdRTZFpFL6y9R57XNTBIFfbjOF
0lkmFTqJTBi3OTPjj0hMjpjOfXhyKUnwdqCAYlAxeuWHhqPDDhtEcnNtGdmQzx4Z
KvYzc3t31o1gPin024UUfA528PNREszaXhTM90/Dj0dhVSMoG1VQsQjxzkPXxdM1
wemfic+77Bk4oUrSplhdvvk4nySDWeseEjfdyVU2ixqldy8Ib1+6H+PCjWNotpQ0
YiDOHBy3rrUh6NhIqb0C2PWvd/9Aqs0nHQHJ8QKYK574MDbVo8mKTACFdoSYoZ1u
wuif7NL6qkyS55szf0dm8zPBCJ5nIR5SQE98E7+ptXNa8AipfFsTkZrr3aOjcdey
98AWF9KaZOWRfwgIm3Ft
=AYEK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amit-migration/tags/migration-2.7-2' into staging
migration: add TLS support to the migration data channel
This is a big refactoring of the migration backend code - moving away from
QEMUFile to the new QIOChannel framework introduced here. This brings a
good level of abstraction and reduction of many lines of code.
This series also adds the ability for many backends (all except RDMA) to
use TLS for encrypting the migration data between the endpoints.
# gpg: Signature made Thu 26 May 2016 07:07:08 BST using RSA key ID 657EF670
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg: aka "Amit Shah <amit@kernel.org>"
# gpg: aka "Amit Shah <amitshah@gmx.net>"
* remotes/amit-migration/tags/migration-2.7-2: (28 commits)
migration: remove qemu_get_fd method from QEMUFile
migration: remove support for non-iovec based write handlers
migration: add support for encrypting data with TLS
migration: define 'tls-creds' and 'tls-hostname' migration parameters
migration: don't use an array for storing migrate parameters
migration: move definition of struct QEMUFile back into qemu-file.c
migration: delete QEMUFile stdio implementation
migration: delete QEMUFile sockets implementation
migration: delete QEMUSizedBuffer struct
migration: delete QEMUFile buffer implementation
migration: convert savevm to use QIOChannel for writing to files
migration: convert RDMA to use QIOChannel interface
migration: convert exec socket protocol to use QIOChannel
migration: convert fd socket protocol to use QIOChannel
migration: convert tcp socket protocol to use QIOChannel
migration: rename unix.c to socket.c
migration: convert unix socket protocol to use QIOChannel
migration: convert post-copy to use QIOChannelBuffer
migration: add reporting of errors for outgoing migration
migration: add helpers for creating QEMUFile from a QIOChannel
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that there is a set_blocking callback in QEMUFileOps,
and all users needing non-blocking support have been
converted to QIOChannel, there is no longer any codepath
requiring the qemu_get_fd() method for QEMUFile. Remove it
to avoid further code being introduced with an expectation
of direct file handle access.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-29-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
All the remaining QEMUFile implementations provide an iovec
based write handler, so the put_buffer callback can be removed
to simplify the code.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-28-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
This extends the migration_set_incoming_channel and
migration_set_outgoing_channel methods so that they
will automatically wrap the QIOChannel in a
QIOChannelTLS instance if TLS credentials are configured
in the migration parameters.
This allows TLS to work for tcp, unix, fd and exec
migration protocols. It does not (currently) work for
RDMA since it does not use these APIs, but it is
unlikely that TLS would be desired with RDMA anyway
since it would degrade the performance to that seen
with TCP defeating the purpose of using RDMA.
On the target host, QEMU would be launched with a set
of TLS credentials for a server endpoint
$ qemu-system-x86_64 -monitor stdio -incoming defer \
-object tls-creds-x509,dir=/home/berrange/security/qemutls,endpoint=server,id=tls0 \
...other args...
To enable incoming TLS migration 2 monitor commands are
then used
(qemu) migrate_set_str_parameter tls-creds tls0
(qemu) migrate_incoming tcp:myhostname:9000
On the source host, QEMU is launched in a similar
manner but using client endpoint credentials
$ qemu-system-x86_64 -monitor stdio \
-object tls-creds-x509,dir=/home/berrange/security/qemutls,endpoint=client,id=tls0 \
...other args...
To enable outgoing TLS migration 2 monitor commands are
then used
(qemu) migrate_set_str_parameter tls-creds tls0
(qemu) migrate tcp:otherhostname:9000
Thanks to earlier improvements to error reporting,
TLS errors can be seen 'info migrate' when doing a
detached migration. For example:
(qemu) info migrate
capabilities: xbzrle: off rdma-pin-all: off auto-converge: off zero-blocks: off compress: off events: off x-postcopy-ram: off
Migration status: failed
total time: 0 milliseconds
error description: TLS handshake failed: The TLS connection was non-properly terminated.
Or
(qemu) info migrate
capabilities: xbzrle: off rdma-pin-all: off auto-converge: off zero-blocks: off compress: off events: off x-postcopy-ram: off
Migration status: failed
total time: 0 milliseconds
error description: Certificate does not match the hostname localhost
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-27-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Define two new migration parameters to be used with TLS encryption.
The 'tls-creds' parameter provides the ID of an instance of the
'tls-creds' object type, or rather a subclass such as 'tls-creds-x509'.
Providing these credentials will enable use of TLS on the migration
data stream.
If using x509 certificates, together with a migration URI that does
not include a hostname, the 'tls-hostname' parameter provides the
hostname to use when verifying the server's x509 certificate. This
allows TLS to be used in combination with fd: and exec: protocols
where a TCP connection is established by a 3rd party outside of
QEMU.
NB, this requires changing the migrate_set_parameter method in the
HMP to accept a 's' (string) value instead of 'i' (integer). This
is backwards compatible, because the parsing of strings allows the
quotes to be optional, thus any integer is also a valid string.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-26-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The MigrateState struct uses an array for storing migration
parameters. This presumes that all future parameters will
be integers too, which is not going to be the case. There
is no functional reason why an array is used, if anything
it makes the code less clear. The QAPI schema already
defines a struct - MigrationParameters - capable of storing
all the individual parameters, so just use that instead of
an array.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-25-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Now that the memory buffer based QEMUFile impl is gone, there
is no need for any backend to be accessing internals of the
QEMUFile struct, so it can be moved back into qemu-file.c
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-24-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Now that the exec migration backend and savevm have converted
to use the QIOChannel based QEMUFile, there is no user remaining
for the stdio based QEMUFile impl and it can be deleted.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-23-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Now that the tcp, unix and fd migration backends have converted
to use the QIOChannel based QEMUFile, there is no user remaining
for the sockets based QEMUFile impl and it can be deleted.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-22-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Now that we don't have have a buffer based QemuFile
implementation, the QEMUSizedBuffer code is also
unused and can be deleted. A simpler buffer class
also exists in util/buffer.c which other code can
used as needed.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-21-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The qemu_bufopen() method is no longer used, so the memory
buffer based QEMUFile backend can be deleted entirely.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-20-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Convert the exec savevm code to use QIOChannel and QEMUFileChannel,
instead of the stdio APIs.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-19-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
This converts the RDMA code to provide a subclass of QIOChannel
that uses RDMA for the data transport.
This implementation of RDMA does not correctly handle non-blocking
mode. Reads might block if there was not already some pending data
and writes will block until all data is sent. This flawed behaviour
was already present in the existing impl, so appears to not be a
critical problem at this time. It should be on the list of things
to fix in the future though.
The RDMA code would be much better off it it could be split up in
a generic RDMA layer, a QIOChannel impl based on RMDA, and then
the RMDA migration glue. This is left as a future exercise for
the brave.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-18-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Convert the exec socket migration protocol driver to use
QIOChannel and QEMUFileChannel, instead of the stdio
popen APIs. It can be unconditionally built because the
QIOChannelCommand class can report suitable error messages
on platforms which can't fork processes.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-17-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Convert the fd socket migration protocol driver to use
QIOChannel and QEMUFileChannel, instead of plain sockets
APIs. It can be unconditionally built because the
QIOChannel APIs it uses will take care to report suitable
error messages if needed.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-16-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Drop the current TCP socket migration driver and extend
the new generic socket driver to cope with the TCP address
format
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-15-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The unix.c file will be nearly the same as the tcp.c file,
only differing in the initial SocketAddress creation code.
Rename unix.c to socket.c and refactor it a little to
prepare for merging the TCP code.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-14-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Convert the unix socket migration protocol driver to use
QIOChannel and QEMUFileChannel, instead of plain sockets
APIs. It can be unconditionally built, since the socket
impl of QIOChannel will report a suitable error on platforms
where UNIX sockets are unavailable.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-13-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The post-copy code does some I/O to/from an intermediate
in-memory buffer rather than direct to the underlying
I/O channel. Switch this code to use QIOChannelBuffer
instead of QEMUSizedBuffer.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-12-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Currently if an application initiates an outgoing migration,
it may or may not, get an error reported back on failure. If
the error occurs synchronously to the 'migrate' command
execution, the client app will see the error message. This
is the case for DNS lookup failures. If the error occurs
asynchronously to the monitor command though, the error
will be thrown away and the client left guessing about
what went wrong. This is the case for failure to connect
to the TCP server (eg due to wrong port, or firewall
rules, or other similar errors).
In the future we'll be adding more scope for errors to
happen asynchronously with the TLS protocol handshake.
TLS errors are hard to diagnose even when they are well
reported, so discarding errors entirely will make it
impossible to debug TLS connection problems.
Management apps which do migration are already using
'query-migrate' / 'info migrate' to check up on progress
of background migration operations and to see their end
status. This is a fine place to also include the error
message when things go wrong.
This patch thus adds an 'error-desc' field to the
MigrationInfo struct, which will be populated when
the 'status' is set to 'failed':
(qemu) migrate -d tcp:localhost:9001
(qemu) info migrate
capabilities: xbzrle: off rdma-pin-all: off auto-converge: off zero-blocks: off compress: off events: off x-postcopy-ram: off
Migration status: failed (Error connecting to socket: Connection refused)
total time: 0 milliseconds
In the HMP, when doing non-detached migration, it is
also possible to display this error message directly
to the app.
(qemu) migrate tcp:localhost:9001
Error connecting to socket: Connection refused
Or with QMP
{
"execute": "query-migrate",
"arguments": {}
}
{
"return": {
"status": "failed",
"error-desc": "address resolution failed for myhost:9000: No address associated with hostname"
}
}
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1461751518-12128-11-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Currently creating a QEMUFile instance from a QIOChannel is
quite simple only requiring a single call to
qemu_fopen_channel_input or qemu_fopen_channel_output
depending on the end of migration connection.
When QEMU gains TLS support, however, there will need to be
a TLS negotiation done inbetween creation of the QIOChannel
and creation of the final QEMUFile. Introduce some helper
methods that will encapsulate this logic, isolating the
migration protocol drivers from knowledge about TLS.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1461751518-12128-10-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Introduce a new QEMUFile implementation that is based on
the QIOChannel objects. This impl is different from existing
impls in that there is no file descriptor that can be made
available, as some channels may be based on higher level
protocols such as TLS.
Although the QIOChannel based implementation can trivially
provide a bi-directional stream, initially we have separate
functions for opening input & output directions to fit with
the expectation of the current QEMUFile interface.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-9-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Instead of relying on the default QEMUFile I/O blocking flag
state, explicitly turn on blocking I/O for outgoing migration
since it takes place in a background thread.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1461751518-12128-8-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Remove the assumption that every QEMUFile implementation has
a file descriptor available by introducing a new function
in QEMUFileOps to change the blocking state of a QEMUFile.
If not set, it will fallback to the original code using
the get_fd method.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1461751518-12128-7-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The QEMUFileOps struct contains the I/O subsystem callbacks
and the migration stage hooks. Split the hooks out into a
separate QEMUFileHooks struct to make it easier to refactor
the I/O side of QEMUFile without affecting the hooks.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1461751518-12128-6-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The QEMUFile writev_buffer / put_buffer functions are expected
to write out the full set of requested data, blocking until
complete. The qemu_fflush() caller does not expect to deal with
partial writes. Clarify the function comments and add a sanity
check to the code to catch mistaken implementations.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1461751518-12128-5-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The bdrv_next() users all leaked the BdrvNextIterator after completing
the iteration. Simply changing bdrv_next() to free the iterator before
returning NULL at the end of list doesn't work because some callers exit
the loop before looking at all BDSes.
This patch moves the BdrvNextIterator from the heap to the stack of
the caller and switches to a bdrv_first()/bdrv_next() interface for
initialising the iterator.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
- ensure src block devices continue fine after a failed migration
- fail on migration blockers; helps 9p savevm/loadvm
- move autoconverge commands out of experimental state
- move the migration-specific qjson in migration/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=RpPT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amit-migration/tags/migration-2.7-1' into staging
migration fixes:
- ensure src block devices continue fine after a failed migration
- fail on migration blockers; helps 9p savevm/loadvm
- move autoconverge commands out of experimental state
- move the migration-specific qjson in migration/
# gpg: Signature made Mon 23 May 2016 18:15:09 BST using RSA key ID 657EF670
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg: aka "Amit Shah <amit@kernel.org>"
# gpg: aka "Amit Shah <amitshah@gmx.net>"
* remotes/amit-migration/tags/migration-2.7-1:
migration: regain control of images when migration fails to complete
savevm: fail if migration blockers are present
migration: Promote improved autoconverge commands out of experimental state
migration/qjson: Drop gratuitous use of QOM
migration: Move qjson.[ch] to migration/
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We currently have an error path during migration that can cause
the source QEMU to abort:
migration_thread()
migration_completion()
runstate_is_running() ----------------> true if guest is running
bdrv_inactivate_all() ----------------> inactivate images
qemu_savevm_state_complete_precopy()
... qemu_fflush()
socket_writev_buffer() --------> error because destination fails
qemu_fflush() -------------------> set error on migration stream
migration_completion() -----------------> set migrate state to FAILED
migration_thread() -----------------------> break migration loop
vm_start() -----------------------------> restart guest with inactive
images
and you get:
qemu-system-ppc64: socket_writev_buffer: Got err=104 for (32768/18446744073709551615)
qemu-system-ppc64: /home/greg/Work/qemu/qemu-master/block/io.c:1342:bdrv_co_do_pwritev: Assertion `!(bs->open_flags & 0x0800)' failed.
Aborted (core dumped)
If we try postcopy with a similar scenario, we also get the writev error
message but QEMU leaves the guest paused because entered_postcopy is true.
We could possibly do the same with precopy and leave the guest paused.
But since the historical default for migration errors is to restart the
source, this patch adds a call to bdrv_invalidate_cache_all() instead.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Message-Id: <146357896785.6003.11983081732454362715.stgit@bahia.huguette.org>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
QEMU has currently two ways to prevent migration to occur:
- migration blocker when it depends on runtime state
- VMStateDescription.unmigratable when migration is not supported at all
This patch gathers all the logic into a single function to be called from
both the savevm and the migrate paths.
This fixes a bug with 9p, at least, where savevm would succeed and the
following would happen in the guest after loadvm:
$ ls /host
ls: cannot access /host: Protocol error
With this patch:
(qemu) savevm foo
Migration is disabled when VirtFS export path '/' is mounted in the guest
using mount_tag 'host'
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <146239057139.11271.9011797645454781543.stgit@bahia.huguette.org>
[Update subject according to Paolo's suggestion - Amit]
Signed-off-by: Amit Shah <amit.shah@redhat.com>
On the one hand, we have already qemu_get_ram_block() whose function
is similar. On the other hand, we can directly use mr->ram_block but
searching RAMblock by ram_addr which is a kind of waste.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1462845901-89716-2-git-send-email-arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new autoconverge throttling commands have been tested for a release now. It
is time to move them out of the experimental state.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Message-Id: <1461262038-8197-1-git-send-email-jjherne@linux.vnet.ibm.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
All the use of QOM buys us here is the ability to destroy the thing
with object_unref(OBJECT(vmdesc)). Not worth the notational overhead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1462380558-2030-3-git-send-email-armbru@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Type QJSON lets you build JSON text. Its interface mirrors (a subset
of) abstract JSON syntax.
QAPI output visitors also produce JSON text. They assert their
preconditions and invariants, and therefore abort on incorrect use.
Contrastingly, QJSON does *not* detect incorrect use. It happily
produces invalid JSON then. This is what migration wants.
QJSON was designed for migration, and migration is its only user.
Move it to migration/ for proper coverage by MAINTAINERS, and to deter
accidental use outside migration.
[Pointed out by Eric: QJSON was added in commits 0457d07..b174257
-- Amit]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1462380558-2030-2-git-send-email-armbru@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
We need to introduce a separate BdrvNextIterator struct that can keep
more state than just the current BDS in order to avoid using the bs->blk
pointer.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- postcopy is no longer experimental
- fix a use-after-free in postcopy
- fix a compile warning
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJW4rotAAoJEB6aO1+FQIO2y5IP/jZk6TET5STLnoPxb6p/rYqF
wSm39JZYef81FnnGtOtBjBYyhuQTPwvYx9wK4O9nqhXIxiq1tlfGIeP8lknmOH7O
VOoSImefz7kKzRWlo4z2AUvCAESST+qHltqQLeENhDTZnn1loMqQgbDe4Ave9Png
loR5xsqeZYkxkOhhPj1jcTwkcAyWuy/rFsfjq1KjQZwXefHiutyLuMfJLgzUXoUU
wgzNO/wC8HPY8LdsfJTyCxdjH88Q1BE9KGybi9DTMizv8Jdm7Qg3C6AohxZBlDKG
EXmEUbYgmMAQeQDMzq4r251mtIFkcYin7PwDxy4/sGW9E5PX/bm4MbPCZ4FO0Nha
f1y/dUp7vxHn6jP8SX6NWkwFhpOsC8zdIb9UXTWSheTnxZvKuIF1V6pAe//0vVIn
DhjZrZpwfBzHXEfeiZjYi3aVeX8xBe5r12K+iDs39DwghIFxwFhu0jLb+MTEviUP
/6ui5ZHYeQV8j/6bE99ii3wVlNzAlE70pfXOqG3XsgP+tWgSuuUE5xLKNGZygFRY
KlTigEKleipTzG0KAP8M7eKquFhGiV607aSEiboVMYGc53+I6ak6KQEtT2a7s7Xp
ZVNaOlPy4dNkHuMqNnz8lhrLUtVWaOpzf1XqKxiOQPVGDsYber4L6FIdUcybxWLw
Sty5ZTl4F/K/zIXacXED
=6epX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amit-migration/tags/migration-for-2.6-7' into staging
migration:
- postcopy is no longer experimental
- fix a use-after-free in postcopy
- fix a compile warning
# gpg: Signature made Fri 11 Mar 2016 12:29:33 GMT using RSA key ID 854083B6
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg: aka "Amit Shah <amit@kernel.org>"
# gpg: aka "Amit Shah <amitshah@gmx.net>"
* remotes/amit-migration/tags/migration-for-2.6-7:
postcopy: Remove the x-
postcopy: listen thread is never joined
migration: fix use-after-free in loadvm_postcopy_handle_run_bh
migration: fix warning for source_return_path_thread
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Postcopy seems to have survived a cycle with only a few fixes,
and Jiri has the current libvirt wired up and working
( https://www.redhat.com/archives/libvir-list/2016-March/msg00080.html )
so remove the experimental tag.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1457690016-9070-3-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
We don't join the listen thread, it does its own cleanup.
Mark as detached not joinable.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1457690016-9070-2-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
MigrationState is destroyed before we can come into bottom half.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Amit Shah <amit.shah@redhat.com>
CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1457537708-8622-1-git-send-email-den@openvz.org>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
max_len is not necessary, while it brings a warning during compilation
when specify "-Wstack-usage=1000000". Replacing using sizeof().
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1457503932-31763-1-git-send-email-peterx@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Now that QEMU wraps the Win32 sockets methods to automatically
set errno upon failure, there is no reason for callers to use
the socket_error() method. They can rely on accessing errno
even on Win32. Remove all use of socket_error() from general
code, leaving it as a static method in oslib-win32.c only.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
I'd missed the sync count off in the postcopy case.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-id: 1456394631-18010-1-git-send-email-dgilbert@redhat.com
Message-Id: <1456394631-18010-1-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Migration of pseries-2.3 doesn't have configuration section. Unfortunately,
QEMU 2.4/2.4.1/2.5 are buggy and always stream and expect the configuration
section, and break migration both ways.
This patch introduces a property which allows to enforce a configuration
section for machines who don't have one.
It can be set at startup:
-machine enforce-config-section=on
or later from the QEMU monitor:
qom-set /machine enforce-config-section on
It is up to the tooling to set or unset this property according to the
version of the QEMU at the other end of the pipe.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There is a possibility to hit an assert in qcow2_get_specific_info that
s->qcow_version is undefined. This happens when VM in starting from
suspended state, i.e. it processes incoming migration, and in the same
time 'info block' is called.
The problem is that qcow2_invalidate_cache() closes the image and
memset()s BDRVQcowState in the middle.
The patch moves processing of bdrv_invalidate_cache_all out of
coroutine context for postcopy migration to avoid that. This function
is called with the following stack:
process_incoming_migration_co
qemu_loadvm_state
qemu_loadvm_state_main
loadvm_process_command
loadvm_postcopy_handle_run
Signed-off-by: Denis V. Lunev <den@openvz.org>
Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Amit Shah <amit.shah@redhat.com>
Message-Id: <1456304019-10507-3-git-send-email-den@openvz.org>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
There is a possibility to hit an assert in qcow2_get_specific_info that
s->qcow_version is undefined. This happens when VM in starting from
suspended state, i.e. it processes incoming migration, and in the same
time 'info block' is called.
The problem is that qcow2_invalidate_cache() closes the image and
memset()s BDRVQcowState in the middle.
The patch moves processing of bdrv_invalidate_cache_all out of
coroutine context for standard migration to avoid that.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Amit Shah <amit.shah@redhat.com>
Message-Id: <1456304019-10507-2-git-send-email-den@openvz.org>
[Amit: Fix a use-after-free bug]
Signed-off-by: Amit Shah <amit.shah@redhat.com>
sys/eventfd.h was being guarded only by a check for linux but does
not exist on older distributions like CentOS 5. Move the include
into the code that uses it and add an appropriate guard.
Signed-off-by: Matthew Fortune <matthew.fortune@imgtec.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <6D39441BF12EF246A7ABCE6654B023536BB85DEB@hhmail02.hh.imgtec.org>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
In qemu_savevm_state_complete_precopy(), it iterates on each device to add
a json object and transfer related status to destination, while the order
of the last two steps could be refined.
Current order:
json_start_object()
save_section_header()
vmstate_save()
json_end_object()
save_section_footer()
After the change:
json_start_object()
save_section_header()
vmstate_save()
save_section_footer()
json_end_object()
This patch reorder the code to to make it symmetric. No functional change.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1454626230-16334-1-git-send-email-richard.weiyang@gmail.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Fixes all over the place.
virtio dataplane migration support.
Old q35 machine types removed.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWzuKeAAoJECgfDbjSjVRpGzIH/1Tz6CoEq1rowiyVJ9B80oQU
gDI2YWnJDSwJllmAF0rmoPRBQR8op3ZETZiCAcADHoZ7kdBNWGbyQeaDrrEPH7Q/
rCDVt8Q3g80vs89aWKG0nQ16J2MW5TbkuiQw7pjQSdc9AbUdWpUqSiWnpZ+sPAql
6DuVpjQ4/rN2alucXoa1Sir8KDDV7kBuY8U6/KoY890qzh842dv2523qvuCza9yR
KX8Imj3oQAFjFSv5t1aOD3yYvWFd73EsReHPLGb1JtsVr/6wjs0sFUyA3JicBgnT
+kWoSObWikfDY69HnqTkJpkun6woMM3zW5h2SkUBf9QP3yqLfGIp9uSriNN84Ak=
=KXyh
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
vhost, virtio, pci, pc
Fixes all over the place.
virtio dataplane migration support.
Old q35 machine types removed.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 25 Feb 2016 11:16:46 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (21 commits)
q35: No need to check gigabyte_align
q35: Remove unused q35-acpi-dsdt.aml file
ich9: Remove enable_tco arguments from init functions
machine: Remove no_tco field
q35: Remove old machine versions
tests/vhost-user-bridge: fix build on 32 bit systems
vring: remove
virtio-scsi: do not use vring in dataplane
virtio-blk: do not use vring in dataplane
virtio-blk: fix "disabled data plane" mode
virtio: export vring_notify as virtio_should_notify
virtio: add AioContext-specific function for host notifiers
vring: make vring_enable_notification return void
block-migration: acquire AioContext as necessary
pci core: function pci_bus_init() cleanup
pci core: function pci_host_bus_register() cleanup
balloon: Use only 'pc-dimm' type dimm for ballooning
virtio-balloon: rewrite get_current_ram_size()
move get_current_ram_size to virtio-balloon.c
vhost-user: don't merge regions with different fds
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is needed because dataplane will run during block migration as well.
The block device migration code is quite liberal in taking the iothread
mutex. For simplicity, keep it the same way, even though one could
actually choose between the BQL (for regular BlockDriverStates) and
the AioContext (for dataplane BlockDriverStates). When the block layer
is made fully thread safe, aio_context_acquire shall go away altogether.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Spice hooks the migration status changes to figure out when to
transmit information to the new spice server; but the migration
status in postcopy doesn't quite fit - the destination starts
running before the end of the source migration.
It's not a case of hanging off the migration status change to
postcopy-active either, since that happens before we stop the
guest CPU.
Fix it by sending a notify just after sending the device state,
and adding a flag that can be tested by the notify receiver.
Symptom:
spice handover doesn't work with the error:
red_worker.c:11540:display_channel_wait_for_migrate_data: timeout
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1456161452-25318-1-git-send-email-dgilbert@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When using 'migrate -b', we must make sure to take ownership of the
image before writing to it. Otherwise metadata would be thrown away on
migration completion; this was caught by the assertions introduced in
commit 09e0c771.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This can cause various segmentation faults or aborts in qemu-iotests
test 091.
Fixes: 5b82b703b6
Cc: Dave Gilbert <dgilbert@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Within the if statement, time_spent is assured to be non-zero.
This patch just removes the check on time_spent when calculating mbs.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Although accesses to ram_list.dirty_memory[] use atomics so multiple
threads can safely dirty the bitmap, the data structure is not fully
thread-safe yet.
This patch handles the RAM hotplug case where ram_list.dirty_memory[] is
grown. ram_list.dirty_memory[] is change from a regular bitmap to an
RCU array of pointers to fixed-size bitmap blocks. Threads can continue
accessing bitmap blocks while the array is being extended. See the
comments in the code for an in-depth explanation of struct
DirtyMemoryBlocks.
I have tested that live migration with virtio-blk dataplane works.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <1453728801-5398-2-git-send-email-stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
state->name does not contain a terminating '\0' and you may get:
Machine type received is 'pseries-2.3y�?' and local is 'pseries-2.4'
load of migration failed: Invalid argument
Let's add a precision modifier to fix this.
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Message-Id: <20160205083201.2201.76109.stgit@bahia.huguette.org>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Since 's->state' will be set in migrate_init(), there is no
need to set it before calling migrate_init(). The code and
the related comments can be removed.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1453875065-24326-1-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Some helper functions use parameters 'RAMBlock *block' and 'ram_addr_t *offset',
We can use 'PageSearchStatus *pss' directly instead, with this change, we
can reduce the number of parameters for these helper function, also
it is easily to add new parameters for these helper functions.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1452829066-9764-5-git-send-email-zhang.zhanghailiang@huawei.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
qemu_loadvm_state is too long, and we can simplify it by splitting up
with three helper functions.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1452829066-9764-4-git-send-email-zhang.zhanghailiang@huawei.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Rename the 'file' member of MigrationState to 'to_dst_file' to
be consistent with to_src_file, from_src_file and from_dst_file.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1452829066-9764-3-git-send-email-zhang.zhanghailiang@huawei.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Split host_from_stream_offset() into two parts:
One is to get ram block, which the block idstr may be get from migration
stream, the other is to get hva (host) address from block and the offset.
Besides, we will do the check working in a new helper offset_in_ramblock().
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1452829066-9764-2-git-send-email-zhang.zhanghailiang@huawei.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-2-git-send-email-peter.maydell@linaro.org
Replace the uint8 softfloat-specific typedef with uint8_t.
This change was made with
find include hw fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\buint8\b/uint8_t/g'
together with manual removal of the typedef definition and
manual fixing of more erroneous uses found via test compilation.
It turns out that the only code using this type is an accidental
use where uint8_t was intended anyway...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Message-id: 1452603315-27030-7-git-send-email-peter.maydell@linaro.org
So far, live migration with shared storage meant that the image is in a
not-really-ready don't-touch-me state on the destination while the
source is still actively using it, but after completing the migration,
the image was fully opened on both sides. This is bad.
This patch adds a block driver callback to inactivate images on the
source before completing the migration. Inactivation means that it goes
to a state as if it was just live migrated to the qemu instance on the
source (i.e. BDRV_O_INACTIVE is set). You're then supposed to continue
either on the source or on the destination, which takes ownership of the
image.
A typical migration looks like this now with respect to disk images:
1. Destination qemu is started, the image is opened with
BDRV_O_INACTIVE. The image is fully opened on the source.
2. Migration is about to complete. The source flushes the image and
inactivates it. Now both sides have the image opened with
BDRV_O_INACTIVE and are expecting the other side to still modify it.
3. One side (the destination on success) continues and calls
bdrv_invalidate_all() in order to take ownership of the image again.
This removes BDRV_O_INACTIVE on the resuming side; the flag remains
set on the other side.
This ensures that the same image isn't written to by both instances
(unless both are resumed, but then you get what you deserve). This is
important because .bdrv_close for non-BDRV_O_INACTIVE images could write
to the image file, which is definitely forbidden while another host is
using the image.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
This allows to send a partial array where the size is another
structure field multiplied by a constant.
Signed-off-by: Juan Quintela <quintela@redhat.com>
[PMM: updated to current master]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Add vmstate support for migrating arrays of CPU_DoubleU via
VMSTATE_CPUDOUBLE_ARRAY.
Signed-off-by: Juan Quintela <quintela@redhat.com>
[PMM: rebased, since files have all moved since 2012;
added VMSTATE_CPUDOUBLE_ARRAY_V for consistency with FLOAT64]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=OVhB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2016-01-13' into staging
Error reporting patches for 2016-01-13
# gpg: Signature made Wed 13 Jan 2016 14:21:48 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-error-2016-01-13: (41 commits)
checkpatch: Detect newlines in error_report and other error functions
error: Consistently name Error * objects err, and not errp
s390/sclp: Simplify control flow in sclp_realize()
hw/s390x: Rename local variables Error *l_err to just err
error: Clean up errors with embedded newlines (again)
vhdx: Fix "log that needs to be replayed" error message
pci-assign: Clean up "Failed to assign" error messages
vmdk: Clean up "Invalid extent lines" error message
vmdk: Clean up control flow in vmdk_parse_extents() a bit
error: Strip trailing '\n' from error string arguments (again)
qemu-io qemu-nbd: Use error_report() etc. instead of fprintf()
migration: Use error_reportf_err() instead of monitor_printf()
spapr: Use error_reportf_err()
error: Use error_prepend() where it makes obvious sense
error: Use error_reportf_err() where it makes obvious sense
error: Don't decorate original error message when adding to it
error: New error_prepend(), error_reportf_err()
test-throttle: Simplify qemu_init_main_loop() error handling
qemu-nbd: Clean up "Failed to load snapshot" error message
block: Clean up "Could not create temporary overlay" error message
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but they
keep coming back. Tracked down with the Coccinelle semantic patch
from commit 312fd5f.
Cc: Fam Zheng <famz@redhat.com>
Cc: Peter Crosthwaite <crosthwaitepeter@gmail.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Changchun Ouyang <changchun.ouyang@intel.com>
Cc: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-17-git-send-email-armbru@redhat.com>
Both error_reportf_err() and monitor_printf() print to the same
destination when monitor_printf() is used correctly, i.e. within an
HMP monitor. Elsewhere, monitor_printf() does nothing, while
error_reportf_err() reports to stderr.
Both changed functions are HMP command handlers. These should only
run within an HMP monitor.
Unlike monitor_printf(), error_reportf_err() uses the error whole
instead of just its message obtained with error_get_pretty(). This
avoids suppressing its hint (see commit 50b7b00), but I don't think
the errors touched in this commit can come with hints.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-15-git-send-email-armbru@redhat.com>
Both error_report_err() and monitor_printf() print to the same
destination when monitor_printf() is used correctly, i.e. within an
HMP monitor. Elsewhere, monitor_printf() does nothing, while
error_report_err() reports to stderr.
Most changed functions are HMP command handlers. These should only
run within an HMP monitor. The one exception is bdrv_password_cb(),
which should also only run within an HMP monitor.
Four command handlers prefix the error message with the command name:
balloon, migrate_set_capability, migrate_set_parameter, migrate.
Pointless, drop.
Unlike monitor_printf(), error_report_err() uses the error whole
instead of just its message obtained with error_get_pretty(). This
avoids suppressing its hint (see commit 50b7b00). Example:
(qemu) device_add ivshmem,id=666
Parameter 'id' expects an identifier
Identifiers consist of letters, digits, '-', '.', '_', starting with a letter.
Try "help device_add" for more information
The "Identifiers consist of..." line is new with this patch.
Coccinelle semantic patch:
@@
expression M, E;
@@
- monitor_printf(M, "%s\n", error_get_pretty(E));
- error_free(E);
+ error_report_err(E);
@r1@
expression M, E;
format F;
position p;
@@
- monitor_printf(M, "...%@F@\n", error_get_pretty(E));@p
- error_free(E);
+ error_report_err(E);
@script:python@
p << r1.p;
@@
print "%s:%s:%s: prefix dropped" % (p[0].file, p[0].line, p[0].column)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-4-git-send-email-armbru@redhat.com>
qemu_get_buffer does a copy, we can avoid the memcpy, and
we can then remove the extra buffer.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1450266458-3178-7-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Avoid a data copy (if we're lucky) in the xbzrle code.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1450266458-3178-6-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Emit an event each time we sync the dirty bitmap on the source;
this helps libvirt use postcopy by giving it a kick when it
might be a good idea to start the postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1450266458-3178-5-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
I missed the calls to send migration events on the destination side
as we enter postcopy.
Take care when adding them not to do it after state has been freed.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1450266458-3178-4-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
For migration destination, we also need to know its state,
we will use it in COLO.
Here we add a new member 'state' for MigrationIncomingState,
and also use migrate_set_state() to modify its value.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
dgilbert: Fixed early free of MigraitonIncomingState
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1450266458-3178-3-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Change the first parameter of migrate_set_state(), and export it.
We will use it in a later patch to update incoming state.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Updated comment as per Juan's review
Message-Id: <1450266458-3178-2-git-send-email-dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Now that we guarantee the user doesn't have any enum values
beginning with a single underscore, we can use that for our
own purposes. Renaming ENUM_MAX to ENUM__MAX makes it obvious
that the sentinel is generated.
This patch was mostly generated by applying a temporary patch:
|diff --git a/scripts/qapi.py b/scripts/qapi.py
|index e6d014b..b862ec9 100644
|--- a/scripts/qapi.py
|+++ b/scripts/qapi.py
|@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = {
| max_index = c_enum_const(name, 'MAX', prefix)
| ret += mcgen('''
| [%(max_index)s] = NULL,
|+// %(max_index)s
| };
| ''',
| max_index=max_index)
then running:
$ cat qapi-{types,event}.c tests/test-qapi-types.c |
sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list
$ git grep -l _MAX | xargs sed -i -f list
The only things not generated are the changes in scripts/qapi.py.
Rejecting enum members named 'MAX' is now useless, and will be dropped
in the next patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[Rebased to current master, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
My fix (84e7b80a) replaced the last_sent_block update that I'd
removed earlier; however it was too aggressive in the xbzrle case.
save_xbzrle_page might return '0' to mean that the page didn't
need sending since it was the same as the last sent version;
in this case we can't update 'last_sent_block' since we didn't
actually send it.
Symptom: 'Illegal RAM offset 1018000' as we try and send a page
to the wrong RAMBlock; potentially that could be a data
corruption if you were really unlucky.
Fixes: 84e7b80a05
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 1449765106-6528-1-git-send-email-dgilbert@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Dividing integer expressions transferred_bytes and time_spent, and then converting
the integer quotient to type double. Any remainder, or fractional part of the
quotient, is ignored. Fix this.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
socket_writev_buffer() writes in a loop, using g_poll() to block. If
g_poll() fails, it tries to write more before the file descriptor is
ready. In theory, this could go into a tight loop. In practice,
errors other than EINTR are really unlikely, and when they happen,
we're probably screwed anyway, so we can just as well loop.
Clean it up a bit: retry poll on EINTR, keep ignoring other errors.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
If we set migration speed in a very large value, block-migration will try to read
all data to the memory. Because
(block_mig_state.submitted + block_mig_state.read_done) * BLOCK_SIZE
will be overflow, and it will be always less than rate limit.
There is no need to read too many data into memory when the rate limit is very large.
So limit the memory usage can fix the overflow problem.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
madvise() returns EINVAL in the case of many failures, but also
returns it in cases where the host kernel doesn't have THP enabled.
Postcopy only really cares that THP is off before it detects faults,
and turns it back on afterwards; so we're going to have
to assume that if the madvise fails then the host just doesn't do
THP and we can carry on with the postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
basically all bdrv_* operations must be called under aio_context_acquire
except ones with bdrv_all prefix.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The patch also ensures proper locking for the operation.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
State deletion can be performed on running VM which reduces VM downtime
This approach looks a bit more natural.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
to create snapshot for all loaded block drivers.
The patch also ensures proper locking.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
There is no much sense to do the check and write warning.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
to check that snapshot is available for all loaded block drivers.
The check bs != bs1 in hmp_info_snapshots is an optimization. The check
for availability of this snapshot will return always true as the list
of snapshots was collected from that image.
The patch also ensures proper locking.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We should check that all inserted and not read-only images support
snapshotting. This could be made using already invented helper
bdrv_all_can_snapshot().
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
to switch to snapshot on all loaded block drivers.
The patch also ensures proper locking.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
to delete snapshots from all loaded block drivers.
The patch also ensures proper locking.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The patch enforces proper locking for this operation.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The check is unneccesary, we read the value at the start of the
thread, use it, and never change it. The value is checked to be
non-NULL before thread creation.
Spotted by coverity, CID 1339211
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
I set current_time before the postcopy test but never use it;
(I think this was from the original version where it was time based).
Spotted by coverity, CID 1339208
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In a82d593b61 I accidentally removed the setting of
last_sent_block, put it back.
Symptoms:
Multithreaded compression only uses one thread.
Migration is a bit less efficient since it won't use 'cont' flags.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixes: a82d593b61
Signed-off-by: Juan Quintela <quintela@redhat.com>
Peter reported a lock error on MacOS after my a82d593b
patch.
migrate_get_current does one-time initialisation of
a bunch of variables.
migrate_init does reinitialisation even on a 2nd
migrate after a cancel.
The problem here was that I'd initialised the mutex
in migrate_get_current, and the memset in migrate_init
corrupted it.
Remove the memset and replace it by explicit initialisation
of fields that need initialising; this also turns out to be simpler
than the old code that had to preserve some fields.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixes: a82d593b
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Improve the text in both the qapi-schema and hmp help to point out
you need to set the postcopy-ram capability prior to issuing
migrate-start-postcopy.
Also fix the text of the migrate_start_postcopy error that
deals with capabilities.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Where the target page size is different from the host page
we special case it, but I messed up on the zero case check.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Where we have iterable, but non-postcopiable devices (e.g. htab
or block migration), complete them before forming the 'package'
but with the CPUs stopped. This stops them filling up the package.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Rest of the file already use that trick. 64bit offsets make no sense in
32bit archs, but that is ram_addr_t for you.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
since commit
commit 94f5a43704
Author: Liang Li <liang.z.li@intel.com>
Date: Mon Nov 2 15:37:00 2015 +0800
migration: defer migration_end & blk_mig_cleanup
when actual .cleanup callbacks calling was removed from complete operations.
The patch fixes regression introduced by the commit above results in
100% reliable assert for virtio-scsi VM with iothreads enabled during
'virsh create-snapshot' operation:
assert(i != mr->ioeventfd_nb);
memory_region_del_eventfd
virtio_pci_set_host_notifier_internal
virtio_pci_set_host_notifier
virtio_scsi_dataplane_start
virtio_scsi_handle_cmd
virtio_queue_notify_vq
virtio_queue_host_notifier_read
aio_dispatch
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Postcopy detects accesses to pages that haven't been transferred yet
using userfaultfd, and it causes exceptions on pages that are 'not
present'.
Ballooning also causes pages to be marked as 'not present' when the
guest inflates the balloon.
Potentially a balloon could be inflated to discard pages that are
currently inflight during postcopy and that may be arriving at about
the same time.
To avoid this confusion, disable ballooning during postcopy.
When disabled we drop balloon requests from the guest. Since ballooning
is generally initiated by the host, the management system should avoid
initiating any balloon instructions to the guest during migration,
although it's not possible to know how long it would take a guest to
process a request made prior to the start of migration.
Guest initiated ballooning will not know if it's really freed a page
of host memory or not.
Queueing the requests until after migration would be nice, but is
non-trivial, since the set of inflate/deflate requests have to
be compared with the state of the page to know what the final
outcome is allowed to be.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Userfault doesn't work with mlock; mlock is designed to nail down pages
so they don't move, userfault is designed to tell you when they're not
there.
munlock the pages we userfault protect before postcopy.
mlock everything again at the end if mlock is enabled.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Tweak the end of migration cleanup; we don't want to close stuff down
at the end of the main stream, since the postcopy is still sending pages
on the other thread.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Prior to servicing userfault requests we must ensure we've not got
huge pages in the area that might include non-transferred memory,
since a hugepage could incorrectly mark the whole huge page as present.
We mark the area as non-huge page (nhp) just before we perform
discards; the discard code now tells us to discard any areas
that haven't been sent (as well as any that are redirtied);
any already formed transparent-huge-pages get fragmented
by this discard process if they cotnain any discards.
Transparent huge pages that have been entirely transferred
and don't contain any discards are not broken by this mechanism;
they stay as huge pages.
By starting postcopy after a full precopy pass, many of the pages
then stay as huge pages; this is important for maintaining performance
after the end of the migration.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Wire up more of the handlers for the commands on the destination side,
in particular loadvm_postcopy_handle_run now has enough to start the
guest running.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The loading of a device state (during postcopy) may access guest
memory that's still on the source machine and thus might need
a page fill; split off a separate thread that handles the incoming
page data so that the original incoming migration code can finish
off the device data.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
userfaultfd is a Linux syscall that gives an fd that receives a stream
of notifications of accesses to pages registered with it and allows
the program to acknowledge those stalls and tell the accessing
thread to carry on.
We convert the requests from the kernel into messages back to the
source asking for the pages.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Prior to the start of postcopy, ensure that everything that will
be transferred later is a whole host-page in size.
This is accomplished by discarding partially transferred host pages
and marking any that are partially dirty as fully dirty.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
During the postcopy phase we must not call the iterate method on
precopy-only devices, since they may have done some cleanup during
the _complete call at the end of the precopy phase.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Once we're in postcopy the source processors are stopped and memory
shouldn't change any more, so there's no need to look at the dirty
map.
There are two notes to this:
1) If we do resync and a page had changed then the page would get
sent again, which the destination wouldn't allow (since it might
have also modified the page)
2) Before disabling this I'd seen very rare cases where a page had been
marked dirtied although the memory contents are apparently identical
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Ensure that target pages received within a host page are in order.
This shouldn't trigger, but in the cases where the sender goes
wrong and sends stuff out of order it produces a corruption that's
really nasty to debug.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In postcopy, the destination guest is running at the same time
as it's receiving pages; as we receive new pages we must put
them into the guests address space atomically to avoid a running
CPU accessing a partially written page.
Use the helpers in postcopy-ram.c to map these pages.
qemu_get_buffer_in_place is used to avoid a copy out of qemu_file
in the case that postcopy is going to do a copy anyway.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
postcopy_place_page (etc) provide a way for postcopy to place a page
into guests memory atomically (using the copy ioctl on the ufd).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When transmitting RAM pages, consume pages that have been queued by
MIG_RPCOMM_REQPAGE commands and send them ahead of normal page scanning.
Note:
a) After a queued page the linear walk carries on from after the
unqueued page; there is a reasonable chance that the destination
was about to ask for other closeby pages anyway.
b) We have to be careful of any assumptions that the page walking
code makes, in particular it does some short cuts on its first linear
walk that break as soon as we do a queued page.
c) We have to be careful to not break up host-page size chunks, since
this makes it harder to place the pages on the destination.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
On receiving MIG_RPCOMM_REQ_PAGES look up the address and
queue the page.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add MIG_RP_MSG_REQ_PAGES command on Return path for the postcopy
destination to request a page from the source.
Two versions exist:
MIG_RP_MSG_REQ_PAGES_ID that includes a RAMBlock name and start/len
MIG_RP_MSG_REQ_PAGES that just has start/len for use with the same
RAMBlock as a previous MIG_RP_MSG_REQ_PAGES_ID
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The end of migration in postcopy is a bit different since some of
the things normally done at the end of migration have already been
done on the transition to postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Rework the migration thread to setup and start postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Mark the area of RAM as 'userfault'
Start up a fault-thread to handle any userfaults we might receive
from it (to be filled in later)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Soon we'll be in either ACTIVE or POSTCOPY_ACTIVE when we
complete migration, and we need to know which we expect to be
in to change state safely.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Maintain an 'unsentmap' of pages that have yet to be sent.
This is used in the following patches to discard some set of
the pages already sent as we enter postcopy mode.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add qemu_savevm_state_complete_postcopy to complement
qemu_savevm_state_complete_precopy together with a new
save_live_complete_postcopy method on devices.
The save_live_complete_precopy method is called on
all devices during a precopy migration, and all non-postcopy
devices during a postcopy migration at the transition.
The save_live_complete_postcopy method is called at
the end of postcopy for all postcopiable devices.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
VMDescription is normally sent at the end, after all
of the devices; however that's not the end for postcopy,
so just don't send it when in postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
'MIGRATION_STATUS_POSTCOPY_ACTIVE' is entered after migrate_start_postcopy
'migration_in_postcopy' is provided for other sections to know if
they're in postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Soon we'll be in either ACTIVE or POSTCOPY_ACTIVE when we
complete migration, and we need to know which we expect to be
in to change state safely.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Once postcopy is enabled (with migrate_set_capability), the migration
will still start on precopy mode. To cause a transition into postcopy
the:
migrate_start_postcopy
command must be issued. Postcopy will start sometime after this
(when it's next checked in the migration loop).
Issuing the command before migration has started will error,
and issuing after it has finished is ignored.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Provide a check to see if the OS we're running on has all the bits
needed for postcopy.
Creates postcopy-ram.c which will get most of the other helpers we need.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Modify save_live_pending to return separate postcopiable and
non-postcopiable counts.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
MIG_CMD_PACKAGED is a migration command that wraps a chunk of migration
stream inside a package whose length can be determined purely by reading
its header. The destination guarantees that the whole MIG_CMD_PACKAGED
is read off the stream prior to parsing the contents.
This is used by postcopy to load device state (from the package)
while leaving the main stream free to receive memory pages.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The state of the postcopy process is managed via a series of messages;
* Add wrappers and handlers for sending/receiving these messages
* Add state variable that track the current state of postcopy
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The 'postcopy ram' capability allows postcopy migration of RAM;
note that the migration starts off in precopy mode until
postcopy mode is triggered (see the migrate_start_postcopy
patch later in the series).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Postcopy needs to have two migration streams loading concurrently;
one from memory (with the device state) and the other from the fd
with the memory transactions.
Split the core of qemu_loadvm_state out so we can use it for both.
Allow the inner loadvm loop to quit and cause the parent loops to
exit as well.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Open a return path, and handle messages that are received upon it.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add 'migration_is_setup_or_active' utility function to check state.
(It gets postcopy added to it's list later on in the series)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add migrate_send_rp_message to send a message from destination to source along the return path.
(It uses a mutex to let it be called from multiple threads)
Add migrate_send_rp_shut to send a 'shut' message to indicate
the destination is finished with the RP.
Add migrate_send_rp_ack to send a 'PONG' message in response to a PING
Use it in the MSG_RP_PING handler
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add two src->dest commands:
* OPEN_RETURN_PATH - To request that the destination open the return path
* PING - Request an acknowledge from the destination
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Create QEMU_VM_COMMAND section type for sending commands from
source to destination. These commands are not intended to convey
guest state but to control the migration process.
For use in postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The destination sets the fd to non-blocking on incoming migrations;
this also affects the return path from the destination, and thus we
need to make sure we can safely write to the return path.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Postcopy needs a method to send messages from the destination back to
the source, this is the 'return path'.
Wire it up for 'socket' QEMUFile's.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In postcopy we're going to need to perform the complete phase
for postcopiable devices at a different point, start out by
renaming all of the 'complete's to make the difference obvious.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Suspend to file is very much like a migrate, and it makes life
easier if we have the Migration state available, so initialise it
in the savevm.c code for suspending.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewd-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The main RAM load loop has a call to host_from_stream_offset for
each page type that actually loads data with the same test;
factor it out before the switch.
The host = NULL is to silence a bogus gcc warning of
an unitialised in the RAM_SAVE_COMPRESS_PAGE case, it
doesn't seem to realise that host is always initialised by the if at
the top in the cases the switch takes.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Useful for debugging the migration bitmap and other bitmaps
of the same format (including the sentmap in postcopy).
The bitmap is printed to stderr.
Lines that are all the expected value are excluded so the output
can be quite compact for many bitmaps.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add a wrapper to change the blocking status on a QEMUFile
rather than having to use qemu_set_block(qemu_get_fd(f));
it seems best to avoid exposing the fd since not all QEMUFile's
really have one. With this wrapper we could move the implementation
down to be different on different transports.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
qemu_get_buffer always copies the data it reads to a users buffer,
however in many cases the file buffer inside qemu_file could be given
back to the caller, avoiding the copy. This isn't always possible
depending on the size and alignment of the data.
Thus 'qemu_get_buffer_in_place' either copies the data to a supplied
buffer or updates a pointer to the internal buffer if convenient.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
'file' becomes confusing when you have flows in each direction;
rename to make it clear.
This leaves just the main forward direction ms->file, which is used
in a lot of places and is probably not worth renaming given the churn.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add a function to find a RAMBlock by name; use it in two
of the places that already open code that loop; we've
got another use later in postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The vmstate_configuration is currently written
in 'qemu_savevm_state_begin', move it to
'qemu_savevm_state_header' since it's got a hard
requirement that it must be the 1st thing after
the header.
(In postcopy some 'command' sections get sent
early before the saving of the main sections
and hence before qemu_savevm_state_begin).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Just clean up code, no behavior change.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>al3
Reviewed-by: Amit Shah <amit.shah@redhat.com>al3
Signed-off-by: Juan Quintela <quintela@redhat.com>al3
'cleanup' seems more appropriate than 'cancel'.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>al3
Reviewed-by: Amit Shah <amit.shah@redhat.com>al3
Signed-off-by: Juan Quintela <quintela@redhat.com>al3
The function qemu_savevm_state_cancel is called after the migration
in migration_thread, it seems strange to 'cancel' it after completion,
rename it to qemu_savevm_state_cleanup looks better.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>al3
Reviewed-by: Amit Shah <amit.shah@redhat.com>al3
Signed-off-by: Juan Quintela <quintela@redhat.com>al3
Because of the patch 3ea3b7fa9af067982f34b of kvm, which introduces a
lazy collapsing of small sptes into large sptes mechanism, now
migration_end() is a time consuming operation because it calls
memroy_global_dirty_log_stop(), which will trigger the dropping of small
sptes operation and takes about dozens of milliseconds, so call
migration_end() before all the vmsate data has already been transferred
to the destination will prolong VM downtime. This operation should be
deferred after all the data has been transferred to the destination.
blk_mig_cleanup() can be deferred too.
For a VM with 8G RAM, this patch can reduce the VM downtime about 30 ms.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>al3
Reviewed-by: Amit Shah <amit.shah@redhat.com>al3
Signed-off-by: Juan Quintela <quintela@redhat.com>al3
blk_bs() will not necessarily return a non-NULL value any more (unless
blk_is_available() is true or it can be assumed to otherwise, e.g.
because it is called immediately after a successful blk_new_with_bs() or
blk_new_open()).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The coroutine files are currently referenced by the block-obj-y
variable. The coroutine functionality though is already used by
more than just the block code. eg migration code uses coroutine
yield. In the future the I/O channel code will also use the
coroutine yield functionality. Since the coroutine code is nicely
self-contained it can be easily built as part of the libqemuutil.a
library, making it widely available.
The headers are also moved into include/qemu, instead of the
include/block directory, since they are now part of the util
codebase, and the impl was never in the block/ directory
either.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Release qemu global mutex before call synchronize_rcu().
synchronize_rcu() waiting for all readers to finish their critical
sections. There is at least one critical section in which we try
to get QGM (critical section is in address_space_rw() and
prepare_mmio_access() is trying to aquire QGM).
Both functions (migration_end() and migration_bitmap_extend())
are called from main thread which is holding QGM.
Thus there is a race condition that ends up with deadlock:
main thread working thread
Lock QGA |
| Call KVM_EXIT_IO handler
| |
| Open rcu reader's critical section
Migration cleanup bh |
| |
synchronize_rcu() is |
waiting for readers |
| prepare_mmio_access() is waiting for QGM
\ /
deadlock
The patch changes bitmap freeing from direct g_free after synchronize_rcu
to free inside call_rcu.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reported-by: Igor Redko <redkoi@virtuozzo.com>
Tested-by: Igor Redko <redkoi@virtuozzo.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
CC: Anna Melekhova <annam@virtuozzo.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Amit Shah <amit.shah@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Wen Congyang <wency@cn.fujitsu.com>
We were announcing the dest host's IP as our new IP a bit too soon -- if
there were errors detected after this announcement was done, the
migration is failed and the VM could continue running on the src host --
causing problems later.
Move around the qemu_announce_self() call so it's done just before the
VM is runnable.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Alexey Perevalov