This reverts commit 3eacf70bb5.
It was only needed because of duplicate objects caused by
declare_dependency(link_whole: ...), and can be dropped now
that meson.build specifies objects and dependencies separately
for the internal dependencies.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20240524-objects-v1-2-07cbbe96166b@daynix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The dbus_display1_dep is not really used since all occurrences also
request gio independently. Just list the generated sources and drop
dbus_display1_dep.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
New header and source files are added for containing QemuDmaBuf struct
definition and newly introduced helpers for creating/freeing the struct
and accessing its data.
v10: Change the license type for both dmabuf.h and dmabuf.c from MIT to
GPL to be in line with QEMU's default license
v11: -- Added new helpers, qemu_dmabuf_close for closing dmabuf->fd,
qemu_dmabuf_dup_fd for duplicating dmabuf->fd
(Daniel P. Berrangé <berrange@redhat.com>)
-- Let qemu_dmabuf_fee to call qemu_dmabuf_close before freeing
the struct to make sure fd is closed.
(Daniel P. Berrangé <berrange@redhat.com>)
v12: Not closing fd in qemu_dmabuf_free because there are cases fd
should still be available even after the struct is destroyed
(e.g. virtio-gpu: res->dmabuf_fd).
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20240508175403.3399895-3-dongwon.kim@intel.com>
Building dbus-display1.c explicitly as a static library drops -fPIC by
default, which may not be correct if it ends up linked to a shared
library.
Let the target decide how to build the unit, with or without -fPIC. This
makes commit 186acfbaf7 ("tests/qtest: Depend on dbus_display1_dep") no
longer relevant, as dbus-display1.c will be recompiled.
Fixes: c172136ea33 ("meson: ensure dbus-display generated code is built
before other units")
Reported-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Explicitly specify dbus-display1.h as a dependency so that files
depending on it will not get compiled too early.
Fixes: 1222070e77 ("meson: ensure dbus-display generated code is built before other units")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20240214-dbus-v7-2-7eff29f04c34@daynix.com>
This variable is about the host OS, not the target. It is used a lot
more since the Meson conversion, but the original sin dates back to 2003.
Time to fix it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_DARWIN, CONFIG_LINUX and CONFIG_BSD are used in some rules, but
only CONFIG_LINUX has substantial use. Convert them all to if...endif.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Added XMU Settings to the Input Screen
* Added Peripherals to config
* Prevent overwriting existing XMUs
* Added blockdev.h to try to fix the MacOS build
* Fixed some issues that antangelo pointed out
* Moved the peripheralType and param vars into the loop
* Moved fatx.h and fatx.c to ui\thirdparty\fatx
* Added Validation for Peripheral Settings
* Fixed some nits that were pointed out
* don't pass NULL into xemu_settings_set_string
* Changes following Matt's recommendations
* Changes to XMU FilePicker
* XMU image auto-bind logic refactor
* renamed peripheralType to peripheral_type
* removed unnecessary calls to g_strdup_printf and g_free
* Cleaned up some comments, removed an unnecessary variable
* handle overwrite prompt in Windows
* Fixed some code format and style inconsistencies
* More formatting fixes
* Fixed a few memory leaks
* qemu_access: check for Read and Write access
* Run clang-format
* Remove unused xemu_new_xmu declaration
* Fix use after free in rebind code
The QEMU fallback covers the requirements. We still need the flags of
header inclusion with CONFIG_PIXMAN.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Add stubs for the fallback paths.
get_vc() now returns NULL by default if !PIXMAN.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Move common declarations to console-priv.h, and add a new unit
console-vc.c which will handle VC/chardev rendering, when pixman is
available.
(if necessary, the move could be done chunk by chunks)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Make GBM optional for EGL code, and enable the build for win32.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-13-marcandre.lureau@redhat.com>
D-Bus doesn't support fd-passing on Windows (AF_UNIX doesn't have
SCM_RIGHTS yet, but there are other means to share objects. I have
proposed various solutions upstream, but none seem fitting enough atm).
To make the "-display dbus" work on Windows, implement an alternative
D-Bus interface where all the 'h' (FDs) arguments are replaced with
'ay' (WSASocketW data), and sockets are passed to the other end via
WSADuplicateSocket().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-6-marcandre.lureau@redhat.com>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since we *might* have user emulation with softmmu,
use the clearer 'CONFIG_SYSTEM_ONLY' key to check
for system emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-9-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
By using a subproject, our own meson.build can use variables from
the subproject instead of hard-coded paths. This is also the first step
towards managing downloads with .wrap files instead of submodule.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow to build & use the DBus display without 3d/GPU acceleration support.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It's simply by luck that dbus-display header is built first before the
other units using it.
With sourceset, I can't find an easier way out than declaring an extra
dependency for dbus-display1 generate code.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This moves these commands from MAINTAINERS section "Human
Monitor (HMP)" to "Graphics".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230109190321.1056914-12-armbru@redhat.com>
This moves these commands from MAINTAINERS section "QMP" to
"Graphics".
Command add-client applies to socket character devices in addition to
display devices. Move it anyway. Aside: the way @protocol character
device IDs and display types is bad design.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230109190321.1056914-10-armbru@redhat.com>
The GTK Clipboard implementation may cause guest hangs.
Therefore implement new configure switch: --enable-gtk-clipboard,
as a meson option disabled by default, which warns in the help
text about the experimental nature of the feature.
Regenerate the meson build options to include it.
The initialization of the clipboard is gtk.c, as well as the
compilation of gtk-clipboard.c are now conditional on this new
option to be set.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1150
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Message-Id: <20221121135538.14625-1-cfontana@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Without CONFIG_GBM, compiling dbus-display fails with
../ui/dbus.c: In function ‘dbus_create_context’:
../ui/dbus.c:47:20: error: ‘qemu_egl_rn_ctx’ undeclared (first use in this function); did you mean ‘qemu_egl_init_ctx’?
47 | qemu_egl_rn_ctx);
| ^~~~~~~~~~~~~~~
| qemu_egl_init_ctx
../ui/dbus.c:47:20: note: each undeclared identifier is reported only once for each function it appears in
and many other similar errors, because include/ui/egl-helpers.h only has
these declaration if gbm is found on the system.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1108
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently png support is dependent on vnc for linking object file to
libpng. This commit makes the parameter independent of vnc as it breaks
system emulator with --disable-vnc unless --disable-png is added.
Fixes: 9a0a119a38 ("Added parameter to take screenshot with screendump as PNG", 2022-04-27)
Signed-off-by: Kshitij Suri <kshitij.suri@nutanix.com>
Message-Id: <20220510161932.228481-1-kshitij.suri@nutanix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduces a new user interface that looks much nicer, is easier to
navigate with controllers, provides more context to users, and is
scalable. Some additional features are included.
* Adds 'popup menu' with actions that can be used easily from controller
* Adds 'main menu', unifying other configuration dialogs
* Adds port-forwarding user interface
* Adds screenshot feature
* Adds volume control feature
* Adds gamepad auto-bind option
* Adds vsync configuration option
* Adds auto UI scaling
* Adds preferred window size selection
* Adds AV pack selection
* Exposes some existing config items in GUI
Add a new chardev backend which allows D-Bus client to handle the
chardev stream & events.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Expose the clipboard API over D-Bus. See the interface documentation for
further details.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Add an option to use direct connections instead of via the bus. Clients
are accepted with QMP add_client.
This allows to provide the D-Bus display without a bus. It also
simplifies the testing setup (some CI have issues to setup a D-Bus bus
in a container).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
The "dbus" display backend exports the QEMU consoles and other
UI-related interfaces over D-Bus.
By default, the connection is established on the session bus, but you
can specify a different bus with the "addr" option.
The backend takes the "org.qemu" service name, while still allowing
further instances to queue on the same name (so you can lookup all the
available instances too). It accepts any number of clients at this
point, although this is expected to evolve with options to restrict
clients, or only accept p2p via fd passing.
The interface is intentionally very close to the internal QEMU API,
and can be introspected or interacted with busctl/dfeet etc:
$ ./qemu-system-x86_64 -name MyVM -display dbus
$ busctl --user introspect org.qemu /org/qemu/Display1/Console_0
org.qemu.Display1.Console interface - - -
.RegisterListener method h - -
.SetUIInfo method qqiiuu - -
.DeviceAddress property s "pci/0000/01.0" emits-change
.Head property u 0 emits-change
.Height property u 480 emits-change
.Label property s "VGA" emits-change
.Type property s "Graphic" emits-change
.Width property u 640 emits-change
[...]
See the interfaces XML source file and Sphinx docs for the generated API
documentations.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Add meson feature options for Spice and Spice protocol, and move
detection logic out of configure.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20211007102453.978041-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20211007130829.632254-13-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Matt Borgerson