This test boots a Linux kernel on a smdkc210 board and verify
the serial output is working.
The cpio image used comes from the linux-build-test project:
https://github.com/groeck/linux-build-test
If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.
This test can be run using:
$ IGNORE_AVOCADO_CONSOLE_BUG=yes \
avocado --show=app,console run -t machine:smdkc210 \
tests/acceptance/boot_linux_console.py
console: Booting Linux on physical CPU 0x900
console: Linux version 4.19.0-6-armmp (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u1 (2019-09-20)
console: CPU: ARMv7 Processor [410fc090] revision 0 (ARMv7), cr=10c5387d
console: CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
console: OF: fdt: Machine model: Samsung smdkv310 evaluation board based on Exynos4210
[...]
console: Samsung CPU ID: 0x43210211
console: random: get_random_bytes called from start_kernel+0xa0/0x504 with crng_init=0
console: percpu: Embedded 17 pages/cpu s39756 r8192 d21684 u69632
console: Built 1 zonelists, mobility grouping on. Total pages: 249152
console: Kernel command line: printk.time=0 console=ttySAC0,115200n8 earlyprintk random.trust_cpu=off cryptomgr.notests cpuidle.off=1 panic=-1 noreboot
[...]
console: L2C: platform modifies aux control register: 0x02020000 -> 0x3e420001
console: L2C: platform provided aux values permit register corruption.
console: L2C: DT/platform modifies aux control register: 0x02020000 -> 0x3e420001
console: L2C-310 erratum 769419 enabled
console: L2C-310 enabling early BRESP for Cortex-A9
console: L2C-310: enabling full line of zeros but not enabled in Cortex-A9
console: L2C-310 ID prefetch enabled, offset 1 lines
console: L2C-310 dynamic clock gating disabled, standby mode disabled
console: L2C-310 cache controller enabled, 8 ways, 128 kB
console: L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e420001
console: Exynos4210 clocks: sclk_apll = 12000000, sclk_mpll = 12000000
console: sclk_epll = 12000000, sclk_vpll = 12000000, arm_clk = 12000000
[...]
console: s3c-i2c 13860000.i2c: slave address 0x00
console: s3c-i2c 13860000.i2c: bus frequency set to 93 KHz
console: s3c-i2c 13860000.i2c: i2c-0: S3C I2C adapter
[...]
console: dma-pl330 12680000.pdma: Loaded driver for PL330 DMAC-241330
console: dma-pl330 12680000.pdma: DBUFF-256x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
console: dma-pl330 12690000.pdma: Loaded driver for PL330 DMAC-241330
console: dma-pl330 12690000.pdma: DBUFF-256x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
console: dma-pl330 12850000.mdma: Loaded driver for PL330 DMAC-241330
console: dma-pl330 12850000.mdma: DBUFF-256x8bytes Num_Chans-8 Num_Peri-1 Num_Events-16
console: dma-pl330 12850000.mdma: PM domain LCD0 will not be powered off
console: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console: Serial: AMBA driver
console: 13800000.serial: ttySAC0 at MMIO 0x13800000 (irq = 40, base_baud = 0) is a S3C6400/10
console: console [ttySAC0] enabled
console: 13810000.serial: ttySAC1 at MMIO 0x13810000 (irq = 41, base_baud = 0) is a S3C6400/10
console: 13820000.serial: ttySAC2 at MMIO 0x13820000 (irq = 42, base_baud = 0) is a S3C6400/10
console: 13830000.serial: ttySAC3 at MMIO 0x13830000 (irq = 43, base_baud = 0) is a S3C6400/10
[...]
console: Freeing unused kernel memory: 2048K
console: Run /init as init process
console: mount: mounting devtmpfs on /dev failed: Device or resource busy
console: Starting logging: OK
console: Initializing random number generator... random: dd: uninitialized urandom read (512 bytes read)
console: done.
console: Starting network: OK
console: Found console ttySAC0
console: Linux version 4.19.0-6-armmp (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u1 (2019-09-20)
console: Boot successful.
PASS (37.98 s)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20191028073441.6448-25-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
[Cleber: removed conditional to skip test]
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Similar to the x86_64/pc test, it boots a Linux kernel on a raspi2
board and verify the serial is working.
The kernel image and DeviceTree blob are built by the Raspbian
project (based on Debian):
https://www.raspbian.org/RaspbianImages
as recommended by the Raspberry Pi project:
https://www.raspberrypi.org/downloads/raspbian/
If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.
Alternatively, this test can be run using:
$ avocado run -t arch:arm tests/acceptance
$ avocado run -t machine:raspi2 tests/acceptance
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20191028073441.6448-21-philmd@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Avocado 67.0 [*] introduced the avocado.utils.archive module which
provides handling of gzip files. Use the gzip_uncompress() method.
[*] https://avocado-framework.readthedocs.io/en/67.0/api/utils/avocado.utils.html#avocado.utils.archive.gzip_uncompress
Suggested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20191028073441.6448-20-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
User case from:
https://mail.coreboot.org/pipermail/openbios/2018-May/010360.html
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20191028073441.6448-16-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
[Cleber: added skip conditional for Travis]
Signed-off-by: Cleber Rosa <crosa@redhat.com>
As of this commit, NetBSD 4.0 is very old. However it is enough to
test the PRep/40p machine.
User case from:
http://mail-index.netbsd.org/port-prep/2017/04/11/msg000112.html
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20191028073441.6448-14-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
[Cleber: fixed file name and imports]
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Refactor the exec_command_and_wait_for_pattern() utility method
so we can reuse it in other files.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191028073441.6448-6-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Some firmwares don't parse the <Newline> control character and
expect a <carriage return>.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20191028073441.6448-5-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Because of a possible deadlock (QEMU waiting for the socket to
become writable) let's close the console socket as soon as we
stop to use it.
Suggested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191028073441.6448-4-philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
[Cleber: corrected small typo in commit message]
Signed-off-by: Cleber Rosa <crosa@redhat.com>
The same utility method is already present in two different test
files, so let's consolidate it into a single utility function.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190916164011.7653-1-crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: failure_message is optional]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20191028073441.6448-3-philmd@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Change 32558ce7a4 introduced specific directories for the socket dir
when using python/qemu/machine.py:QEMUMachine. iotests probably
didn't catch the condition that two simultaneous QEMUMachine
instances, without manually set temporary or socket dirs would clash.
Having two QEMUMachine instances is a condition expected for many
acceptance tests, and it's already used by the migration tests.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
- iotest patches
- Improve performance of the mirror block job in write-blocking mode
- Limit memory usage for the backup block job
- Add discard and write-zeroes support to the NVMe host block driver
- Fix a bug in the mirror job
- Prevent the qcow2 driver from creating technically non-compliant qcow2
v3 images (where there is not enough extra data for snapshot table
entries)
- Allow callers of bdrv_truncate() (etc.) to determine whether the file
must be resized to the exact given size or whether it is OK for block
devices not to shrink
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl2224ESHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9AeXMH/RXKEX4BZYMRKCe41P18tJC9Bl2x0T20
YeOsZVvpARlr7o/36BF2kGFF4MnL0OQ+9ELuyROX865rk/VL2rWqnHDE5oQM889a
dFwMs+0zvNbig3iLNcw0H5OkE2mrdM+a1EUdn/lBe/39Z8dPqPxRGqIYHq38Ugdu
emwSy1nWen7o0f71HRJfyVtI3KcrzXx71FrA/FY2yL/eHz+zRYGZj2SpAdFPkXP/
lgaz+m0tWhnSW1QzEOXB0Gh69ULt/DczCinYmv5qUY1noW5TPPtiDNCQTts5O4ba
oJsR3AJv5/l9m65JTmiyQSqnQfPcstrQ5FqOcSnP637cfqUFyWsvdks=
=L7v1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2019-10-28' into staging
Block patches for softfreeze:
- iotest patches
- Improve performance of the mirror block job in write-blocking mode
- Limit memory usage for the backup block job
- Add discard and write-zeroes support to the NVMe host block driver
- Fix a bug in the mirror job
- Prevent the qcow2 driver from creating technically non-compliant qcow2
v3 images (where there is not enough extra data for snapshot table
entries)
- Allow callers of bdrv_truncate() (etc.) to determine whether the file
must be resized to the exact given size or whether it is OK for block
devices not to shrink
# gpg: Signature made Mon 28 Oct 2019 12:13:53 GMT
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2019-10-28: (69 commits)
qemu-iotests: restrict 264 to qcow2 only
Revert "qemu-img: Check post-truncation size"
block: Pass truncate exact=true where reasonable
block: Let format drivers pass @exact
block: Evaluate @exact in protocol drivers
block: Add @exact parameter to bdrv_co_truncate()
block: Do not truncate file node when formatting
block/cor: Drop cor_co_truncate()
block: Handle filter truncation like native impl.
iotests: Test qcow2's snapshot table handling
iotests: Add peek_file* functions
qcow2: Fix v3 snapshot table entry compliancy
qcow2: Repair snapshot table with too many entries
qcow2: Fix overly long snapshot tables
qcow2: Keep track of the snapshot table length
qcow2: Fix broken snapshot table entries
qcow2: Add qcow2_check_fix_snapshot_table()
qcow2: Separate qcow2_check_read_snapshot_table()
qcow2: Write v3-compliant snapshot list on upgrade
qcow2: Put qcow2_upgrade() into its own function
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
libqos update with support for virtio 1.
Packed ring support for virtio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJdsuDvAAoJECgfDbjSjVRpIP8H/3rHSvZ5+MQGCFLI5GU8m3za
JSOaBSmtcj9KwrpibBfptSCJZNrG8EUVHyo+Z+pvGohXqDB8h9RyBfb6vID8jqzC
5wIzlNBP27F668MUBt2t7xSwK0PWO1QOpEKk6S4SJMpl51ea8ePlTH0jnLVfkaAN
hFKU1wqwc2gMyF9rDjOZ6I+OO1iQbMcrsazFrCXECXCkxDcJM0ey7MheKxVntTjt
0sxFHM2I1A+vXtAzlLo6rS3I9vJ0ATfLfOlZLqrq5uSAL5FKrqsbmGh4sAsFTQAA
eerR6zDz3X+YqfQaVgVk2wixPHQz2w8Rv68j6SiGrdZ29/JT6nVWHT8cGtPsX4c=
=iJuG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio: features, tests
libqos update with support for virtio 1.
Packed ring support for virtio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 25 Oct 2019 12:47:59 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (25 commits)
virtio: drop unused virtio_device_stop_ioeventfd() function
libqos: add VIRTIO PCI 1.0 support
libqos: extract Legacy virtio-pci.c code
libqos: make the virtio-pci BAR index configurable
libqos: expose common virtqueue setup/cleanup functions
libqos: add MSI-X callbacks to QVirtioPCIDevice
libqos: pass full QVirtQueue to set_queue_address()
libqos: add iteration support to qpci_find_capability()
libqos: access VIRTIO 1.0 vring in little-endian
libqos: implement VIRTIO 1.0 FEATURES_OK step
libqos: enforce Device Initialization order
libqos: add missing virtio-9p feature negotiation
tests/virtio-blk-test: set up virtqueue after feature negotiation
virtio-scsi-test: add missing feature negotiation
libqos: extend feature bits to 64-bit
libqos: read QVIRTIO_MMIO_VERSION register
tests/virtio-blk-test: read config space after feature negotiation
virtio: add property to enable packed virtqueue
vhost_net: enable packed ring support
virtio: event suppression support for packed ring
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
264 is unprepared to run with different formats, for example luks needs
handling keys, cloop doesn't support image creation, vpc creates image
larger than requested (which breaks "Backup completed: 5242880" in test
output).
The test is here to check nbd-reconnect feature and we actually don't
need it for all formats. Let's restrict it to qcow2 only.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191025145023.6182-1-vsementsov@virtuozzo.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We have two drivers (iscsi and file-posix) that (in some cases) return
success from their .bdrv_co_truncate() implementation if the block
device is larger than the requested offset, but cannot be shrunk. Some
callers do not want that behavior, so this patch adds a new parameter
that they can use to turn off that behavior.
This patch just adds the parameter and lets the block/io.c and
block/block-backend.c functions pass it around. All other callers
always pass false and none of the implementations evaluate it, so that
this patch does not change existing behavior. Future patches take care
of that.
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190918095144.955-5-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add a test how our qcow2 driver handles extra data in snapshot table
entries, and how it repairs overly long snapshot tables.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191011152814.14791-17-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191011152814.14791-16-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Sockets should be placed into $SOCK_DIR instead of $TEST_DIR, so remove
the $TEST_DIR filter from _filter_nbd.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-24-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-23-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-22-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-21-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-20-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-19-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-18-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-17-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-16-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-15-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-14-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-13-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-12-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-11-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-10-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-9-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-7-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
In addition, drop the nbd_unix_socket assignment in 241 because it does
not really do anything.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-6-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-5-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Specifying this optional parameter allows creating temporary files in
other directories than the test_dir; for example in sock_dir.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191017133155.5327-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
iotests.py itself does not store socket files, but machine.py and
qtest.py do. iotests.py needs to pass the respective path to them, and
they need to adhere to it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191017133155.5327-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Unix sockets generally have a maximum path length. Depending on your
$TEST_DIR, it may be exceeded and then all tests that create and use
Unix sockets there may fail.
Circumvent this by adding a new scratch directory specifically for
Unix socket files. It defaults to a temporary directory (mktemp -d)
that is completely removed after the iotests are done.
(By default, mktemp -d creates a /tmp/tmp.XXXXXXXXXX directory, which
should be short enough for our use cases.)
Use mkdir -p to create the directory (because it seems right), and do
the same for $TEST_DIR (because there is no reason for that to be
created in any different way).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191017133155.5327-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
null-aio may not be whitelisted. Skip all test cases that require it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190917092004.999-7-mreitz@redhat.com
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
null-aio may not be whitelisted. Skip all test cases that require it.
(And skip the whole test if null-co is not whitelisted.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190917092004.999-6-mreitz@redhat.com
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This lets tests use skip_if_unsupported() with a potentially variable
list of required formats.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190917092004.999-5-mreitz@redhat.com
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
skip_if_unsupported() should use the stronger variant case_skip(),
because this allows it to be used even with setUp() (in a meaningful
way).
In the process, make it explicit what we expect the first argument of
the func_wrapper to be (namely something derived of QMPTestCase).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190917092004.999-4-mreitz@redhat.com
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
case_notrun() does not actually skip the current test case. It just
adds a "notrun" note and then returns to the caller, who manually has to
skip the test. Generally, skipping a test case is as simple as
returning from the current function, but not always: For example, this
model does not allow skipping tests already in the setUp() function.
Thus, add a QMPTestCase.case_skip() function that invokes case_notrun()
and then self.skipTest(). To make this work, we need to filter the
information on how many test cases were skipped from the unittest
output.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-id: 20190917092004.999-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We use null-co basically everywhere in the iotests. Unless we want to
test null-aio specifically, we should use it instead (for consistency).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190917092004.999-2-mreitz@redhat.com
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
There are three page size in qemu:
real host page size
host page size
target page size
All of them have dedicate variable to represent. For the last two, we
use the same form in the whole qemu project, while for the first one we
use two forms: qemu_real_host_page_size and getpagesize().
qemu_real_host_page_size is defined to be a replacement of
getpagesize(), so let it serve the role.
[Note] Not fully tested for some arch or device.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191013021145.16011-3-richardw.yang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Philippe Mathieu-Daudé