Emulation of PCIe Data Object Exchange (DOE)
PCIE Base Specification r6.0 6.3 Data Object Exchange
Supports multiple DOE PCIe Extended Capabilities for a single PCIe
device. For each capability, a static array of DOEProtocol should be passed
to pcie_doe_init(). The protocols in that array will be registered under
the DOE capability structure. For each protocol, vendor ID, type, and
corresponding callback function (handle_request()) should be implemented.
This callback function represents how the DOE request for corresponding
protocol will be handled.
pcie_doe_{read/write}_config() must be appended to corresponding PCI
device's config_read/write() handler to enable DOE access. In
pcie_doe_read_config(), false will be returned if pci_config_read()
offset is not within DOE capability range. In pcie_doe_write_config(),
the function will have no affect if the address is not within the related
DOE PCIE extended capability.
Signed-off-by: Huai-Cheng Kuo <hchkuo@avery-design.com.tw>
Signed-off-by: Chris Browy <cbrowy@avery-design.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20221014151045.24781-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch implements initial support for Single Root I/O Virtualization
on an NVMe device.
Essentially, it allows to define the maximum number of virtual functions
supported by the NVMe controller via sriov_max_vfs parameter.
Passing a non-zero value to sriov_max_vfs triggers reporting of SR-IOV
capability by a physical controller and ARI capability by both the
physical and virtual function devices.
NVMe controllers created via virtual functions mirror functionally
the physical controller, which may not entirely be the case, thus
consideration would be needed on the way to limit the capabilities of
the VF.
NVMe subsystem is required for the use of SR-IOV.
Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
A CXL memory device (AKA Type 3) is a CXL component that contains some
combination of volatile and persistent memory. It also implements the
previously defined mailbox interface as well as the memory device
firmware interface.
Although the memory device is configured like a normal PCIe device, the
memory traffic is on an entirely separate bus conceptually (using the
same physical wires as PCIe, but different protocol).
Once the CXL topology is fully configure and address decoders committed,
the guest physical address for the memory device is part of a larger
window which is owned by the platform. The creation of these windows
is later in this series.
The following example will create a 256M device in a 512M window:
-object "memory-backend-file,id=cxl-mem1,share,mem-path=cxl-type3,size=512M"
-device "cxl-type3,bus=rp0,memdev=cxl-mem1,id=cxl-pmem0"
Note: Dropped PCDIMM info interfaces for now. They can be added if
appropriate at a later date.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220429144110.25167-18-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix pba_offset initialization value for BAIDU KUNLUN Virtual
Function device. The KUNLUN hardware returns an incorrect
value for the VF PBA offset, and add a quirk to instead
return a hardcoded value of 0xb400.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210713093743.942-1-caihuoqing@baidu.com
[aw: comment & whitespace tuning]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The Marvell Discovery II aka. MV64361 is a PowerPC system controller
chip that is used on the pegasos2 PPC board. This adds emulation of it
that models the device enough to boot guests on this board. The
mv643xx.h header with register definitions is taken from Linux 4.15.10
only fixing white space errors, removing not needed parts and changing
formatting for QEMU coding style.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <79545ebd03bfe0665b73d2d7cbc74fdf3d62629e.1616680239.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add emulation of VT8231 south bridge ISA part based on the similar
VT82C686B but implemented in a separate subclass that holds the
differences while reusing parts that can be shared.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <10abc9f89854e7c980b9731c33d25a2e307e9c4f.1616680239.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
To allow reusing ISA bridge emulation for vt8231_isa move the device
state of vt82c686b_isa emulation in an abstract via_isa class. This
change breaks migration back compatibility but this is not an issue
for Fuloong2E machine which is not versioned or migration supported.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <0cb8fc69c7aaa555589181931b881335fecd2ef3.1616680239.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The vt82c686b-pm model can be shared between VT82C686B and VT8231. The
only difference between the two is the device id in what we emulate so
make an abstract via-pm model by renaming appropriately and add types
for vt82c686b-pm and vt8231-pm based on it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <34969fc7be984fa070479bfb9f748993a0aef31b.1610223397.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
IOHUB object is added to manage PCI IRQs. It uses KVM_IRQFD
ioctl to create irqfd to injecting PCI interrupts to the guest.
IOHUB object forwards the irqfd to the remote process. Remote process
uses this fd to directly send interrupts to the guest, bypassing QEMU.
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 51d5c3d54e28a68b002e3875c59599c9f5a424a1.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds the basic functionality to emulate a Tulip NIC.
Implemented are:
- RX and TX functionality
- Perfect Frame Filtering
- Big/Little Endian descriptor support
- 93C46 EEPROM support
- LXT970 PHY
Not implemented, mostly because i had no OS using these functions:
- Imperfect frame filtering
- General Purpose Timer
- Transmit automatic polling
- Boot ROM support
- SIA interface
- Big/Little Endian data buffer conversion
Successfully tested with the following Operating Systems:
- MSDOS with Microsoft Network Client 3.0 and DEC ODI drivers
- HPPA Linux
- Windows XP
- HP-UX
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20191022155413.4619-1-svens@stackframe.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
sPAPR code will use it too so move it from VFIO to the common code.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190214051440.59167-1-aik@ozlabs.ru>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The 'q35' machine type implements an Intel Series 3 chipset,
of which there are several variants:
https://www.intel.com/Assets/PDF/datasheet/316966.pdf
The key difference between the 82P35 MCH ('p35', PCI device ID 0x29c0)
and 82Q35 GMCH ('q35', PCI device ID 0x29b0) variants is that the latter
has an integrated graphics adapter. QEMU does not implement integrated
graphics, so uses the PCI ID for the 82P35 chipset, despite calling the
machine type 'q35'. Thus we rename the PCI device ID constant to reflect
reality, to avoid confusing future developers. The new name more closely
matches what pci.ids reports it to be:
$ grep P35 /usr/share/hwdata/pci.ids | grep 29
29c0 82G33/G31/P35/P31 Express DRAM Controller
29c1 82G33/G31/P35/P31 Express PCI Express Root Port
29c4 82G33/G31/P35/P31 Express MEI Controller
29c5 82G33/G31/P35/P31 Express MEI Controller
29c6 82G33/G31/P35/P31 Express PT IDER Controller
29c7 82G33/G31/P35/P31 Express Serial KT Controller
$ grep Q35 /usr/share/hwdata/pci.ids | grep 29
29b0 82Q35 Express DRAM Controller
29b1 82Q35 Express PCI Express Root Port
29b2 82Q35 Express Integrated Graphics Controller
29b3 82Q35 Express Integrated Graphics Controller
29b4 82Q35 Express MEI Controller
29b5 82Q35 Express MEI Controller
29b6 82Q35 Express PT IDER Controller
29b7 82Q35 Express Serial KT Controller
Arguably the QEMU machine type should be named 'p35'. At this point in
time, however, it is not worth the churn for management applications &
documentation to worry about renaming it.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180830105757.10577-1-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add code needed to get a functional PCI subsytem when using in
conjunction with upstream Linux guest (4.13+). Tested to work against
"e1000e" (network adapter, using MSI interrupts) as well as
"usb-ehci" (USB controller, using legacy PCI interrupts).
Based on "i.MX6 Applications Processor Reference Manual" (Document
Number: IMX6DQRM Rev. 4) as well as corresponding dirver in Linux
kernel (circa 4.13 - 4.16 found in drivers/pci/dwc/*)
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
PVRDMA is the QEMU implementation of VMware's paravirtualized RDMA device.
It works with its Linux Kernel driver AS IS, no need for any special
guest modifications.
While it complies with the VMware device, it can also communicate with
bare metal RDMA-enabled machines and does not require an RDMA HCA in the
host, it can work with Soft-RoCE (rxe).
It does not require the whole guest RAM to be pinned allowing memory
over-commit and, even if not implemented yet, migration support will be
possible with some HW assistance.
Implementation is divided into 2 components, rdma general and pvRDMA
specific functions and structures.
The second PVRDMA sub-module - interaction with PCI layer.
- Device configuration and setup (MSIX, BARs etc).
- Setup of DSR (Device Shared Resources)
- Setup of device ring.
- Device management.
Reviewed-by: Dotan Barak <dotanb@mellanox.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Enable it by default for the sparc64-softmmu configuration.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
This adds a simplistic emulation of the Sun GEM ethernet controller
found in Apple ASICs.
Currently we only support the Apple UniNorth 1.x variant, but the
other Apple or Sun variants should mostly be a matter of adding
PCI IDs options.
We have a very primitive emulation of a single Broadcom 5201 PHY
which is supported by the MacOS driver.
This model brings out-of-the-box networking to MacOS 9, and all
versions of OS X I tried with the mac99 platform.
Further improvements from Mark:
- Remove sungem.h file, moving constants into sungem.c as required
- Switch to using tracepoints for debugging
- Split register blocks into separate memory regions
- Use arrays in SunGEMState to hold register values
- Add state-saving support
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Only the display controller part is created automatically on PCI
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 647d292c6f5abba8b2a614687229949b5dcb864e.1492787889.git.balaton@eik.bme.hu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To allow QEMU to add PCI entries in device tree,
we must have a more exhaustive list of PCI class IDs.
This patch synchronizes as much as possible with
pci_ids.h and add some missing IDs from SLOF.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix pba_offset initialization value for Chelsio T5 Virtual Function
device. The T5 hardware has a bug in it where it reports a Pending Interrupt
Bit Array Offset of 0x8000 for its SR-IOV Virtual Functions instead
of the 0x1000 that the hardware actually uses internally. As the hardware
doesn't return the correct pba_offset value, add a quirk to instead
return a hardcoded value of 0x1000 when a Chelsio T5 VF device is
detected.
This bug has been fixed in the Chelsio's next chip series T6 but there are
no plans to respin the T5 ASIC for this bug. It is just documented in the
T5 Errata and left it at that.
Signed-off-by: Gabriel Laupre <glaupre@chelsio.com>
Reviewed-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Rocker is an ethernet switch device, so add 'other' network device class as
defined by PCI to cover these types of devices.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Message-id: 1426306173-24884-6-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 2108 chip supports MSI and MSI-X, so update the emulation
to support both chips.
Signed-off-by: Hannes Reinecke <hare@suse.de>
[Make VMStateDescription const. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The intention of the Xen PV device is that it is used as a parent
device for PV drivers in Xen HVM guests and the set of PV drivers that
bind to the device is determined by its device ID (and possibly
vendor ID and revision). As such, the device should not have a default
device ID, it should always be supplied by the Xen toolstack.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Currently, treat it exactly as a 53C895A.
53C895A is a 53C810 with more capabilities, so this should work.
However, this lets us test different code paths on Linux, which
don't use lastest features if it detect a 810, or on some OSes
which only support 810 and not 895A (like very old Windows NT
versions).
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduces a new Xen PV PCI device which will act as a binding point for
PV drivers for Xen.
The device has parameterized vendor-id, device-id and revision to allow to
be configured as a binding point for any vendor's PV drivers.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Initial commit for emulated Non-Volatile-Memory Express (NVMe) pci
storage device.
NVMe is an open, industry driven storage specification defining
an optimized register and command set designed to deliver the full
capabilities of non-volatile memory on PCIe SSDs. Further information
may be found on the organizations website at:
http://www.nvmexpress.org/
This commit implements the minimum from the specification to work with
existing drivers.
Cc: Keith Busch <keith.busch@gmail.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Matt Borgerson