ShuriZma
/
xemu
mirror of https://github.com/xemu-project/xemu.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

hw/9118.c: Implement active-low interrupt support 

The 9118 ethernet controller interrupt line is active low unless
the IRQ config register is programmed to set both the IRQ_POL
(polarity: active-high) and IRQ_TYPE (type: push-pull) bits:
implement support for inverting the irq output in other configurations.
This also requires that we support setting the bits in the first
place, and that we correctly preserve them across software reset.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
This commit is contained in:
Peter Maydell 2011-05-26 17:34:11 +01:00 committed by Andrzej Zaborowski
parent 953ffe0f93
commit eb47d7c5d9
1 changed files with 9 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
hw/lan9118.c
View File

@ -228,6 +228,12 @@ static void lan9118_update(lan9118_state *s)
if ((s->irq_cfg & IRQ_EN) == 0) {
level = 0;
}
if ((s->irq_cfg & (IRQ_TYPE | IRQ_POL)) != (IRQ_TYPE | IRQ_POL)) {
/* Interrupt is active low unless we're configured as
* active-high polarity, push-pull type.
*/
level = !level;
}
qemu_set_irq(s->irq, level);
}
@ -294,8 +300,7 @@ static void phy_reset(lan9118_state *s)
static void lan9118_reset(DeviceState *d)
{
lan9118_state *s = FROM_SYSBUS(lan9118_state, sysbus_from_qdev(d));
s->irq_cfg &= ~(IRQ_TYPE | IRQ_POL);
s->irq_cfg &= (IRQ_TYPE | IRQ_POL);
s->int_sts = 0;
s->int_en = 0;
s->fifo_int = 0x48000000;
@ -904,7 +909,8 @@ static void lan9118_writel(void *opaque, target_phys_addr_t offset,
switch (offset) {
case CSR_IRQ_CFG:
/* TODO: Implement interrupt deassertion intervals. */
s->irq_cfg = (s->irq_cfg & IRQ_INT) | (val & IRQ_EN);
val &= (IRQ_EN | IRQ_POL | IRQ_TYPE);
s->irq_cfg = (s->irq_cfg & IRQ_INT) | val;
break;
case CSR_INT_STS:
s->int_sts &= ~val;