mirror of https://github.com/xemu-project/xemu.git
hw/char/escc: Lower irq when transmit buffer is filled
The SCC/ESCC will briefly stop asserting an interrupt when the transmit FIFO is filled. This code doesn't model the transmit FIFO/shift register so the pending transmit interrupt is never deasserted which means that an edge-triggered interrupt controller will never see the low-to-high transition it needs to raise another interrupt. The practical consequence of this is that guest firmware with an interrupt service routine for the ESCC that does not send all of the data it has immediately will stop sending data if the following sequence of events occurs: 1. Disable processor interrupts 2. Write a character to the ESCC 3. Add additional characters to a buffer which is drained by the ISR 4. Enable processor interrupts In this case, the first character will be sent, the interrupt will fire and the ISR will output the second character. Since the pending transmit interrupt remains asserted, no additional interrupts will ever fire. This behavior was triggered by firmware for an embedded system with a Z85C30 which necessitated this patch. This patch fixes that situation by explicitly lowering the IRQ when a character is written to the buffer and no other interrupts are currently pending. Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This commit is contained in:
parent
d8276573da
commit
6b99a110c7
|
@ -509,6 +509,13 @@ static void escc_mem_write(void *opaque, hwaddr addr,
|
|||
break;
|
||||
case SERIAL_DATA:
|
||||
trace_escc_mem_writeb_data(CHN_C(s), val);
|
||||
/*
|
||||
* Lower the irq when data is written to the Tx buffer and no other
|
||||
* interrupts are currently pending. The irq will be raised again once
|
||||
* the Tx buffer becomes empty below.
|
||||
*/
|
||||
s->txint = 0;
|
||||
escc_update_irq(s);
|
||||
s->tx = val;
|
||||
if (s->wregs[W_TXCTRL2] & TXCTRL2_TXEN) { // tx enabled
|
||||
if (qemu_chr_fe_backend_connected(&s->chr)) {
|
||||
|
|
Loading…
Reference in New Issue