mirror of https://github.com/xemu-project/xemu.git
hw/misc: AXP209 PMU Emulation
This patch adds minimal support for AXP-209 PMU. Most important is chip ID since U-Boot SPL expects version 0x1. Besides the chip ID register, reset values for two more registers used by A10 U-Boot SPL are covered. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Message-id: 20221226220303.14420-5-strahinja.p.jankovic@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit is contained in:
parent
9be8a82c0e
commit
632dfea36b
|
@ -577,12 +577,14 @@ ARM Machines
|
|||
Allwinner-a10
|
||||
M: Beniamino Galvani <b.galvani@gmail.com>
|
||||
M: Peter Maydell <peter.maydell@linaro.org>
|
||||
R: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
|
||||
L: qemu-arm@nongnu.org
|
||||
S: Odd Fixes
|
||||
F: hw/*/allwinner*
|
||||
F: include/hw/*/allwinner*
|
||||
F: hw/arm/cubieboard.c
|
||||
F: docs/system/arm/cubieboard.rst
|
||||
F: hw/misc/axp209.c
|
||||
|
||||
Allwinner-h3
|
||||
M: Niek Linnenbank <nieklinnenbank@gmail.com>
|
||||
|
|
|
@ -180,4 +180,8 @@ config ALLWINNER_A10_CCM
|
|||
config ALLWINNER_A10_DRAMC
|
||||
bool
|
||||
|
||||
config AXP209_PMU
|
||||
bool
|
||||
depends on I2C
|
||||
|
||||
source macio/Kconfig
|
||||
|
|
|
@ -0,0 +1,238 @@
|
|||
/*
|
||||
* AXP-209 PMU Emulation
|
||||
*
|
||||
* Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a
|
||||
* copy of this software and associated documentation files (the "Software"),
|
||||
* to deal in the Software without restriction, including without limitation
|
||||
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
||||
* and/or sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
|
||||
* DEALINGS IN THE SOFTWARE.
|
||||
*
|
||||
* SPDX-License-Identifier: MIT
|
||||
*/
|
||||
|
||||
#include "qemu/osdep.h"
|
||||
#include "qemu/log.h"
|
||||
#include "trace.h"
|
||||
#include "hw/i2c/i2c.h"
|
||||
#include "migration/vmstate.h"
|
||||
|
||||
#define TYPE_AXP209_PMU "axp209_pmu"
|
||||
|
||||
#define AXP209(obj) \
|
||||
OBJECT_CHECK(AXP209I2CState, (obj), TYPE_AXP209_PMU)
|
||||
|
||||
/* registers */
|
||||
enum {
|
||||
REG_POWER_STATUS = 0x0u,
|
||||
REG_OPERATING_MODE,
|
||||
REG_OTG_VBUS_STATUS,
|
||||
REG_CHIP_VERSION,
|
||||
REG_DATA_CACHE_0,
|
||||
REG_DATA_CACHE_1,
|
||||
REG_DATA_CACHE_2,
|
||||
REG_DATA_CACHE_3,
|
||||
REG_DATA_CACHE_4,
|
||||
REG_DATA_CACHE_5,
|
||||
REG_DATA_CACHE_6,
|
||||
REG_DATA_CACHE_7,
|
||||
REG_DATA_CACHE_8,
|
||||
REG_DATA_CACHE_9,
|
||||
REG_DATA_CACHE_A,
|
||||
REG_DATA_CACHE_B,
|
||||
REG_POWER_OUTPUT_CTRL = 0x12u,
|
||||
REG_DC_DC2_OUT_V_CTRL = 0x23u,
|
||||
REG_DC_DC2_DVS_CTRL = 0x25u,
|
||||
REG_DC_DC3_OUT_V_CTRL = 0x27u,
|
||||
REG_LDO2_4_OUT_V_CTRL,
|
||||
REG_LDO3_OUT_V_CTRL,
|
||||
REG_VBUS_CH_MGMT = 0x30u,
|
||||
REG_SHUTDOWN_V_CTRL,
|
||||
REG_SHUTDOWN_CTRL,
|
||||
REG_CHARGE_CTRL_1,
|
||||
REG_CHARGE_CTRL_2,
|
||||
REG_SPARE_CHARGE_CTRL,
|
||||
REG_PEK_KEY_CTRL,
|
||||
REG_DC_DC_FREQ_SET,
|
||||
REG_CHR_TEMP_TH_SET,
|
||||
REG_CHR_HIGH_TEMP_TH_CTRL,
|
||||
REG_IPSOUT_WARN_L1,
|
||||
REG_IPSOUT_WARN_L2,
|
||||
REG_DISCHR_TEMP_TH_SET,
|
||||
REG_DISCHR_HIGH_TEMP_TH_CTRL,
|
||||
REG_IRQ_BANK_1_CTRL = 0x40u,
|
||||
REG_IRQ_BANK_2_CTRL,
|
||||
REG_IRQ_BANK_3_CTRL,
|
||||
REG_IRQ_BANK_4_CTRL,
|
||||
REG_IRQ_BANK_5_CTRL,
|
||||
REG_IRQ_BANK_1_STAT = 0x48u,
|
||||
REG_IRQ_BANK_2_STAT,
|
||||
REG_IRQ_BANK_3_STAT,
|
||||
REG_IRQ_BANK_4_STAT,
|
||||
REG_IRQ_BANK_5_STAT,
|
||||
REG_ADC_ACIN_V_H = 0x56u,
|
||||
REG_ADC_ACIN_V_L,
|
||||
REG_ADC_ACIN_CURR_H,
|
||||
REG_ADC_ACIN_CURR_L,
|
||||
REG_ADC_VBUS_V_H,
|
||||
REG_ADC_VBUS_V_L,
|
||||
REG_ADC_VBUS_CURR_H,
|
||||
REG_ADC_VBUS_CURR_L,
|
||||
REG_ADC_INT_TEMP_H,
|
||||
REG_ADC_INT_TEMP_L,
|
||||
REG_ADC_TEMP_SENS_V_H = 0x62u,
|
||||
REG_ADC_TEMP_SENS_V_L,
|
||||
REG_ADC_BAT_V_H = 0x78u,
|
||||
REG_ADC_BAT_V_L,
|
||||
REG_ADC_BAT_DISCHR_CURR_H,
|
||||
REG_ADC_BAT_DISCHR_CURR_L,
|
||||
REG_ADC_BAT_CHR_CURR_H,
|
||||
REG_ADC_BAT_CHR_CURR_L,
|
||||
REG_ADC_IPSOUT_V_H,
|
||||
REG_ADC_IPSOUT_V_L,
|
||||
REG_DC_DC_MOD_SEL = 0x80u,
|
||||
REG_ADC_EN_1,
|
||||
REG_ADC_EN_2,
|
||||
REG_ADC_SR_CTRL,
|
||||
REG_ADC_IN_RANGE,
|
||||
REG_GPIO1_ADC_IRQ_RISING_TH,
|
||||
REG_GPIO1_ADC_IRQ_FALLING_TH,
|
||||
REG_TIMER_CTRL = 0x8au,
|
||||
REG_VBUS_CTRL_MON_SRP,
|
||||
REG_OVER_TEMP_SHUTDOWN = 0x8fu,
|
||||
REG_GPIO0_FEAT_SET,
|
||||
REG_GPIO_OUT_HIGH_SET,
|
||||
REG_GPIO1_FEAT_SET,
|
||||
REG_GPIO2_FEAT_SET,
|
||||
REG_GPIO_SIG_STATE_SET_MON,
|
||||
REG_GPIO3_SET,
|
||||
REG_COULOMB_CNTR_CTRL = 0xb8u,
|
||||
REG_POWER_MEAS_RES,
|
||||
NR_REGS
|
||||
};
|
||||
|
||||
#define AXP209_CHIP_VERSION_ID (0x01)
|
||||
#define AXP209_DC_DC2_OUT_V_CTRL_RESET (0x16)
|
||||
#define AXP209_IRQ_BANK_1_CTRL_RESET (0xd8)
|
||||
|
||||
/* A simple I2C slave which returns values of ID or CNT register. */
|
||||
typedef struct AXP209I2CState {
|
||||
/*< private >*/
|
||||
I2CSlave i2c;
|
||||
/*< public >*/
|
||||
uint8_t regs[NR_REGS]; /* peripheral registers */
|
||||
uint8_t ptr; /* current register index */
|
||||
uint8_t count; /* counter used for tx/rx */
|
||||
} AXP209I2CState;
|
||||
|
||||
/* Reset all counters and load ID register */
|
||||
static void axp209_reset_enter(Object *obj, ResetType type)
|
||||
{
|
||||
AXP209I2CState *s = AXP209(obj);
|
||||
|
||||
memset(s->regs, 0, NR_REGS);
|
||||
s->ptr = 0;
|
||||
s->count = 0;
|
||||
s->regs[REG_CHIP_VERSION] = AXP209_CHIP_VERSION_ID;
|
||||
s->regs[REG_DC_DC2_OUT_V_CTRL] = AXP209_DC_DC2_OUT_V_CTRL_RESET;
|
||||
s->regs[REG_IRQ_BANK_1_CTRL] = AXP209_IRQ_BANK_1_CTRL_RESET;
|
||||
}
|
||||
|
||||
/* Handle events from master. */
|
||||
static int axp209_event(I2CSlave *i2c, enum i2c_event event)
|
||||
{
|
||||
AXP209I2CState *s = AXP209(i2c);
|
||||
|
||||
s->count = 0;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* Called when master requests read */
|
||||
static uint8_t axp209_rx(I2CSlave *i2c)
|
||||
{
|
||||
AXP209I2CState *s = AXP209(i2c);
|
||||
uint8_t ret = 0xff;
|
||||
|
||||
if (s->ptr < NR_REGS) {
|
||||
ret = s->regs[s->ptr++];
|
||||
}
|
||||
|
||||
trace_axp209_rx(s->ptr - 1, ret);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
/*
|
||||
* Called when master sends write.
|
||||
* Update ptr with byte 0, then perform write with second byte.
|
||||
*/
|
||||
static int axp209_tx(I2CSlave *i2c, uint8_t data)
|
||||
{
|
||||
AXP209I2CState *s = AXP209(i2c);
|
||||
|
||||
if (s->count == 0) {
|
||||
/* Store register address */
|
||||
s->ptr = data;
|
||||
s->count++;
|
||||
trace_axp209_select(data);
|
||||
} else {
|
||||
trace_axp209_tx(s->ptr, data);
|
||||
if (s->ptr == REG_DC_DC2_OUT_V_CTRL) {
|
||||
s->regs[s->ptr++] = data;
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const VMStateDescription vmstate_axp209 = {
|
||||
.name = TYPE_AXP209_PMU,
|
||||
.version_id = 1,
|
||||
.fields = (VMStateField[]) {
|
||||
VMSTATE_UINT8_ARRAY(regs, AXP209I2CState, NR_REGS),
|
||||
VMSTATE_UINT8(count, AXP209I2CState),
|
||||
VMSTATE_UINT8(ptr, AXP209I2CState),
|
||||
VMSTATE_END_OF_LIST()
|
||||
}
|
||||
};
|
||||
|
||||
static void axp209_class_init(ObjectClass *oc, void *data)
|
||||
{
|
||||
DeviceClass *dc = DEVICE_CLASS(oc);
|
||||
I2CSlaveClass *isc = I2C_SLAVE_CLASS(oc);
|
||||
ResettableClass *rc = RESETTABLE_CLASS(oc);
|
||||
|
||||
rc->phases.enter = axp209_reset_enter;
|
||||
dc->vmsd = &vmstate_axp209;
|
||||
isc->event = axp209_event;
|
||||
isc->recv = axp209_rx;
|
||||
isc->send = axp209_tx;
|
||||
}
|
||||
|
||||
static const TypeInfo axp209_info = {
|
||||
.name = TYPE_AXP209_PMU,
|
||||
.parent = TYPE_I2C_SLAVE,
|
||||
.instance_size = sizeof(AXP209I2CState),
|
||||
.class_init = axp209_class_init
|
||||
};
|
||||
|
||||
static void axp209_register_devices(void)
|
||||
{
|
||||
type_register_static(&axp209_info);
|
||||
}
|
||||
|
||||
type_init(axp209_register_devices);
|
|
@ -45,6 +45,7 @@ specific_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-cpucfg.c'
|
|||
softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-dramc.c'))
|
||||
softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-sysctrl.c'))
|
||||
softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-sid.c'))
|
||||
softmmu_ss.add(when: 'CONFIG_AXP209_PMU', if_true: files('axp209.c'))
|
||||
softmmu_ss.add(when: 'CONFIG_REALVIEW', if_true: files('arm_sysctl.c'))
|
||||
softmmu_ss.add(when: 'CONFIG_NSERIES', if_true: files('cbus.c'))
|
||||
softmmu_ss.add(when: 'CONFIG_ECCMEMCTL', if_true: files('eccmemctl.c'))
|
||||
|
|
|
@ -23,6 +23,11 @@ allwinner_sid_write(uint64_t offset, uint64_t data, unsigned size) "offset 0x%"
|
|||
avr_power_read(uint8_t value) "power_reduc read value:%u"
|
||||
avr_power_write(uint8_t value) "power_reduc write value:%u"
|
||||
|
||||
# axp209.c
|
||||
axp209_rx(uint8_t reg, uint8_t data) "Read reg 0x%" PRIx8 " : 0x%" PRIx8
|
||||
axp209_select(uint8_t reg) "Accessing reg 0x%" PRIx8
|
||||
axp209_tx(uint8_t reg, uint8_t data) "Write reg 0x%" PRIx8 " : 0x%" PRIx8
|
||||
|
||||
# eccmemctl.c
|
||||
ecc_mem_writel_mer(uint32_t val) "Write memory enable 0x%08x"
|
||||
ecc_mem_writel_mdr(uint32_t val) "Write memory delay 0x%08x"
|
||||
|
|
Loading…
Reference in New Issue