From 132b475a73574d8c6a7fa678716f2eead1002939 Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Fri, 24 Aug 2018 13:17:44 +0100 Subject: [PATCH] hw/arm/iotkit: Wire up the lines for MSCs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The IoTKit doesn't have any MSCs itself but it does need some wiring to connect the external signals from MSCs in the outer board model up to the registers and the NVIC IRQ line. We also need to expose a MemoryRegion corresponding to the AHB bus, so that MSCs in the outer board model can use that as their downstream port. (In the FPGA this is the "AHB Slave Expansion" ports shown in the block diagram in the AN505 documentation.) Signed-off-by: Peter Maydell Reviewed-by: Philippe Mathieu-Daudé Message-id: 20180820141116.9118-14-peter.maydell@linaro.org Reviewed-by: Richard Henderson --- hw/arm/iotkit.c | 15 +++++++++++++++ include/hw/arm/iotkit.h | 8 ++++++++ 2 files changed, 23 insertions(+) diff --git a/hw/arm/iotkit.c b/hw/arm/iotkit.c index f8276b5425..8742200fb4 100644 --- a/hw/arm/iotkit.c +++ b/hw/arm/iotkit.c @@ -667,6 +667,21 @@ static void iotkit_realize(DeviceState *dev, Error **errp) iotkit_forward_sec_resp_cfg(s); + /* Forward the MSC related signals */ + qdev_pass_gpios(dev_secctl, dev, "mscexp_status"); + qdev_pass_gpios(dev_secctl, dev, "mscexp_clear"); + qdev_pass_gpios(dev_secctl, dev, "mscexp_ns"); + qdev_connect_gpio_out_named(dev_secctl, "msc_irq", 0, + qdev_get_gpio_in(DEVICE(&s->armv7m), 11)); + + /* + * Expose our container region to the board model; this corresponds + * to the AHB Slave Expansion ports which allow bus master devices + * (eg DMA controllers) in the board model to make transactions into + * devices in the IoTKit. + */ + sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->container); + system_clock_scale = NANOSECONDS_PER_SECOND / s->mainclk_frq; } diff --git a/include/hw/arm/iotkit.h b/include/hw/arm/iotkit.h index 426dc326a0..3a8ee63908 100644 --- a/include/hw/arm/iotkit.h +++ b/include/hw/arm/iotkit.h @@ -28,6 +28,9 @@ * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts * + Named GPIO inputs "EXP_IRQ" 0..n are the expansion interrupts, which * are wired to the NVIC lines 32 .. n+32 + * + sysbus MMIO region 0 is the "AHB Slave Expansion" which allows + * bus master devices in the board model to make transactions into + * all the devices and memory areas in the IoTKit * Controlling up to 4 AHB expansion PPBs which a system using the IoTKit * might provide: * + named GPIO outputs apb_ppcexp{0,1,2,3}_nonsec[0..15] @@ -45,6 +48,11 @@ * Controlling each of the 16 expansion MPCs which a system using the IoTKit * might provide: * + named GPIO inputs mpcexp_status[0..15] + * Controlling each of the 16 expansion MSCs which a system using the IoTKit + * might provide: + * + named GPIO inputs mscexp_status[0..15] + * + named GPIO outputs mscexp_clear[0..15] + * + named GPIO outputs mscexp_ns[0..15] */ #ifndef IOTKIT_H