to the emulation core. That is, if something is determined to be CODE in
Distella and *not* in the emulation core, then it shouldn't be marked as such.
Note that the disassembly will still show it as CODE; it's just that the core
will not. This fixes issues with manually specifying directives from the
debugger prompt, whereby setting a directive and later turning it off never
actually turns it off (as it was being permanently set).
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2160 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
the various header files. Basically, I'm following advice from
Effective C++, and including only what's absolutely necessary. For
definitions that don't need to be included, the designation 'class xxx'
is used instead. This could potentially lead to faster compile times.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2155 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
realized that not all things that are referenced are actually data; code can be
referenced too.
Implemented handling of 'DATA' directive. This is very similar to 'GFX',
except X's are not shown for the bits, and the disassembled bytes are always
in hex. For now, it can only be activated manually with a cfg command.
Its real value will become apparent once the emulation tracks when
addresses are actually accessed, differentiating from addresses that are
never referenced (ie, 'ROW'). This will fix the current deficiency in
modifying DATA values (it can't be done, since they're packed into 16 bytes per
line and not changable).
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2144 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
in general) into the emulation core. For now, this means integrating the
directive names into CartDebug, and having Distella using those same names.
The new directive names were determined by discussion with Omegamatrix on
AtariAge, and are listed in order of decreasing hierarchy:
SKIP (the 'bit' trick to skip over sections of code)
CODE (addresses accessible to the program counter)
GFX (addresses where data is loaded into TIA GRPx registers)
DATA (addresses referenced somewhere in the ROM)
ROW (addresses never referenced at all)
The next TODO item is to have the 6502 core set these values during emulation.
This is currently (crudely) done with a true/false setting in System::peek,
where true corresponds to CODE. This will be extended, so that false
corresponds to DATA. Eventually GFX will also be detected, by watching writes
to the TIA GRPx registers. Still to work out is how to detect SKIP sections.
Anything not marked with one of the above directives will be marked as ROW,
which essentially means ROM space that is never used. This will have the
nice side effect of detecting dead ROM space, potentially leading to space
optimizations.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2143 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
disassembly listing) to show/hide opcode/instruction addresses.
The disassembler now includes hints from current PC location *and* 'code
access points' from the emulation core. Testing has shown that some ROMs
don't show completely accurate disassembled output unless both options are
used.
Updated most of the remaining bankswitch schemes to use the new 'code access
points' functionality during disassembly, allowing for very accurate
disassembled output. Note that the more esoteric schemes (AR, 4A50, FE, MC)
are supported for now.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2139 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
addresses used as part of code execution (ie, from the PC) during emulation.
This gives Distella much more information than can be determined from a
static analysis alone, resulting in an extremely accurate disassembly.
This also allows to generate very accurate debugger .cfg files.
Not all carts have been ported to this new scheme yet, particularly ones
having extended RAM that can be mapped out dynamically.
Note that this new scheme doubles the amount of RAM used for storing ROM
images, so up to 128KB extra will be used. There's also a small runtime
check for each instruction executed. Preliminary testing doesn't show
any slowdowns, but we'll see how it goes.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2138 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
used the current directory.
Fixed error in generating directive lists; there sometimes were 'holes'
at the boundary of CODE <=> DATA transitions.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2129 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
directives associated with a given bank (or all banks). Sometimes the
directives are so borked that's it's easier to remove them all at once.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2127 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
database, it now has its extension removed (.bin, .a26, etc).
Symbol and config files are now loaded when the debugger is first entered,
not when the ROM is actually loaded. This speeds up ROM loading, since
the user may never need to access these file (ie, they may never enter the
debugger).
The debugger 'loadconfig' and 'saveconfig' commands are now implemented.
Bumped version # for next test release.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2126 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
Basically, directories are now guaranteed to always end in the path
separator. Ensuring this makes certain sections of code work faster,
and guaranteeing it allows higher layers of code to not worry about it.
Added 'cfgdir' commandline argument, to specify the default directory
for Distella-like Stella-compatible config files.
Implemented 'loadconfig' debugger prompt command. It's currently
working great with several test config files provided by Omega of
AtariAge.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2125 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
mouse button context menu in the disassembly listing. This is used to
set the default display format for GFX data sections (currently, binary
and hex are supported).
Fixed bug in several debugger input areas to accept the '\' symbol.
This symbol is needed when entering data in binary format (it must
prefix the data if the default base for that field isn't binary).
Added 'jump' debugger prompt command, used to scroll the disassembly
to the given address (or there-abouts, if the address isn't valid).
Editing data in the disassembly now won't cause the display to jump to
the current PC. The display will only move to the PC when it actually
changes.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2123 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
There was a bug in the linked list code causing directives to be added
incorrectly. Also, merging is now done when possible instead of
creating new nodes. This keeps the directive count as small as possible,
and also helps with memory (less allocations happening).
Fixed bug in printing the 'ORG' directive; it was being printed
before the bank was disassembled, so on the first run it was always 0.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2122 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
longer simply added to a list, but intelligently 'merged' (so that
the entire range represented by all directives contains no overlap).
This makes the disassembly a little faster, since it doesn't have to
iterate redundantly. Still TODO in this area is intelligent insertion
for the same type (ie, if inserting in between like blocks, the
blocks should coalesce, instead of being clipped and then a new range
inserted in between).
Added 'loadconfig' and 'saveconfig' debugger prompt commands, which
will eventually access Distella-like config files. No implementation
is present yet.
Added 'listconfig' debugger command, which lists all directives
currently defined by the user, as well as the directives resulting
from a disassembly of a bank (taking into account extra knowledge
that Stella has WRT cached entry points). This command can show
information for a specified bank, or all banks in the cart.
User-defined directives can now be removed; simply issue the same
command that caused an insertion (ie, attempting to insert the same
type and range will remove it instead).
Fixed bug in Distella processing of directives; similar to the
standalone Distella, directives should be processed *before* any
automatic code determination is done.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2121 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
from a Distella config file. For now, the commands are only accessible
within the debugger prompt, and can only be added (no removal/editing).
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2120 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
address space is shown (either $F000 - $F7FF or $F800 - $FFFF).
This eliminates a lot of .byte directives that are invalid in
2K mode anyway, and speeds up the disassembly a little.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2113 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
Added 'ramrandom' commmandline argument, used to toggle randomizing or
zeroing or all RAM in the system (both zero-page and SARA).
Disassembler now properly supports all test cases, including rewinding
within the debugger.
Added preliminary support for disassembling from zero-page RAM.
Bumped version # for final release.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2100 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
The disassembler now accepts a range of start addresses and remembers
old entry points, so the disassembly becomes more complete each time
the debugger is used.
Changes to address offsets within the same bank are now supported
(ie, changing from $fxxx to $dxxx within the same bank properly
updates the display).
Re-added ability to manually change banks from the debugger prompt
and the disassembly UI. This now works correctly with the Distella
code.
Cleanup of the Cartridge::bank(...) API: if a bank cannot be changed,
the calling code will now know about it. This fixes confusion with
some ROMs, whereby changing a bank in the debugger prompt would print
a success message even if the operation failed.
Note that these changes have broken rewind in the debugger. Actually,
it only exposes problems that the rewind functionality already had :)
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2098 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
counts are aligned after the disassembly text with as little space as
necessary.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2042 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
disassembly output. Still TODO is add some visual improvements
(ie, align the cycle counts to not take too much space, etc).
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2041 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
For now, only the infrastructure is being modified.
Make disassembly output a little nicer by drawing a vertical line
separating disassembly text from the actual raw bytes.
Some changes to the SDL sound code initialization, which will (hopefully)
eventually lead to a fix for those users with ATI video drivers, and
not having sound after the first game has been played.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2039 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
or from the user. Before this is done, the parser needs to recognize
variable-length labels (right now, it used fixed spacing and assumes
the largest label is 8 characters).
Fixed bug in Distella; a label was being printed with an incorrect
quote symbol, which would break parsing of that line.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2038 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
The file selector in Windows now ignores all items starting with '.', not just the directories '.' and '..'. This is most apparent when using the Windows port and browing Linux shares, which shows many dot files.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2012 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
key. This enables automatically taking snapshots every X seconds
while in emulation mode. The interval (in seconds) can be set
with the 'ssdelay' commandline argument.
Some minor cleanups to the EventHandler methods, making them
const when possible.
Added latest DPC+ changes from Spiceware.
Fixed issue with ROMs that run entirely from ZP RAM; no disassembly
was being generated when entering the debugger. For now, this
special case is detected, and the disassembly is generated for
the code that ran before the PC entered ZP RAM space. Eventually,
this will go away when the Distella fully supports disassembling
below 0x1000.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2009 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
informs the rest of the system about how a page of address
space is to be treated (READ, WRITE, READWRITE). This makes it
much easier to track if a read from the write port has occurred.
As such, the _rwport command should now be somewhat faster.
Eventually, the debugger/disassembler will use this info to
colorize the output.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2004 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
'Stephen Anthony' (aka, me) in addition to Brad Mott as copyright
holders for Stella. I think I've been with the project long
enough now (almost 10 years) to justify being specifically mentioned
above and beyond 'the Stella Team'.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@2001 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
to 'resolvedata', since that more accurately describes what it does.
Also, it now accepts arguments as strings (never, always, auto)
instead of 0, 1, 2.
Updated main documentation for changes in OSX port 'basedir'.
Updated debugger documentation for recent command additions, and
provided new snapshots where the UI has changed.
It seems to be getting close to a new release - perhaps this
coming Friday.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1999 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
Removed final traces of SpeakJet emulation (the SpeakJet class).
It doesn't look this is ever going to be resurrected.
Tab completion results in the debugger prompt widget are now sorted.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1993 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
the completion now includes functions (built-in and user-defined).
Cleaned up some more of the debugger documentation, mostly
related to tab completion.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1992 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
The debugger 'disasm' command now works again for addresses below
0x1000, and it also now correctly accepts the number of lines to
output in the disassembly.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1989 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
Partial cleanup of the debugger 'help' command, making the output line
up a little nicer. More work is required in this area.
Fixed bug in EditableWidget; setEditString now implies that editing will
be started (if it's been enabled).
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1987 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
class to the CartDebug class, since it's really a debugger feature.
Fixed comments on some of the methods in CartDebug.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1977 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
whether the range 0x1000 - 0x1FFF (aka cart space) has been modified, and
if so, it forces a re-disassembly. Still TODO is modify all the cart
classes that manually handle poke operations to set the page as dirty
when a write actually succeeds.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1974 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
doesn't result in the PC being present. This fixes some bugs in the more
esoteric bankswitch schemes, and also enables rewind to show the correct
disassembled results.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1972 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
over onto the opposite side of the screen. Breakpoints set by clicking
in RomListWidget only apply if they've actually been enabled. This
fixes a bug whereby a breakpoint could look like it is enabled when
it really isn't. Related to this, breakpoints cannot be set for
disassembly lines that don't contain a valid address or an empty
bytes area (basically, empty lines and lines containing '.byte' items).
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1970 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
disassembler. Hopefully this will lead to a new release very soon.
Added 'autocode' commandline argument and associated UI item (in the
RomWidget debugger area), which controls how Distella will use the
'automatic code determination' option. If set to 0/never, this is
completely disabled. If set to 1/always, it is always enabled.
The default is 2/automatic, whereby it is first turned on, and then
turned off if the disassembly doesn't contain the current PC address.
RomListWidget has now been completely reworked, so that it informs
RomWidget of its intent to change breakpoints and patch ROM. If
either of these fail, the action won't be performed, and more
importantly, it won't appear onscreen as if the action has succeeded.
This fixes an old bug whereby patching could fail, yet the onscreen
ROM data was actually changed. Related to this, the list has been
made as efficient as possible, and its contents are never un-necessarily
copied. Also, lines in the disassembly that cannot be modified no
longer show an edit area.
Due to the way the new disassembly works, you can no longer switch between
banks in the RomWidget (Distella would probably fail to disassemble in
such as case).
EditTextWidget can now indicate its contents have changed when adding
text to it.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1966 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
This is very useful for conditional re-disassembly, since many bankswitch
schemes consist of ROM only, and once disassembled, cannot possibly have
a different disassembly at some later point. This is mostly done for such
static schemes (2K, 4K, etc), but more work is required for carts with
extended RAM. Basically, the cart knows best how its been accessed, so
it makes sense to have the hints there.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1965 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
handling to C++ stringstreams instead of C-style character arrays,
which fixed some segfaults (sprintf is evil).
First pass at tying the number of banks to the disassembly. The idea
is that the startup bank (which is now identified by the cart) always
starts at address at 0xfffc, while the other banks are defined by the
PC at the first time we enter the debugger. This is still a WIP,
since there's no actual checking done yet to see if the current PC
is in the current disassembly.
Added 'ctrlcombo' commandline argument, which completely disables
checking for Control-x key combos. This is useful when playing
2-player games where the 'f', 'r' and 'Control' keys are supposed
to be treated separately. Previously, pressing Control and 'r' or
'f' processed some other action (change framerate, reload rom, etc).
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1964 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
the debugger commandline are now reflected in most parts of the debugger UI.
Still TODO is have DiStella use those labels in the disassembly, and deal
with the formatting issues this will entail.
Still completely broken are built-in functions, getting an equate address
based on label, and tab-completions.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1963 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
the RomListWidget instead of being printed to the terminal. There are still
graphical glitches with this, but for a first pass, it's nice to see actual
Distella output in Stella.
Partially working 'disasm' command from the PromptWidget. Currently, it
only disassembles cart address space (aka, 0x1000 or above).
Removed the old disassembly code from CartDebug. Still TODO is fix the
label stuff, both in getting DiStella to use it, and adding/removing
labels. This is greatly reduced now that we only have to worry about
user labels.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1934 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
methods from Debugger directly. As well, the start address is now passed
into DiStella::disassemble() directly; decision to start from the reset
vector is done outside DiStella. This is in preparation for starting
the disassembly from any valid address.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1933 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
from within Stella (vs. reading ROM data from a file).
Compilation is currently broken.
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1931 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
classes. First off, the distella code has been integrated into a
DiStella class. This code isn't yet tied to the debugger, but it does
at least compile and generate valid output.
The RamDebug class has been replaced by a CartDebug class, which
takes responsibility for the previous RamDebug stuff as well as
things related to Cart address space (read from write ports,
disassembly, etc).
Fixed E7 bankswitching when reading from the write port in the upper
256byte area.
Fixed 'read from write port functionality' in general for all carts
that supported it previously. Basically, if _rwport is enabled, the
address is checked to be an actual read (vs. one that's part of a
normal write cycle), *and* it's actually an illegal access (each
cart/bankswitch type now provides a hint to indicate this condition).
Still TODO is clean up the rework, properly integrate DiStella, and
fix labels and defines (which seem to be completely broken).
git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1922 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
stephena