First pass at adding built-in zlib support for those systems that

don't normally have it (notably, Windows).  I've only tested in Linux
so far.


git-svn-id: svn://svn.code.sf.net/p/stella/code/trunk@1926 8b62c5a3-ac7e-4cc8-8f21-d9a121418aba
This commit is contained in:
stephena 2010-01-29 23:37:33 +00:00
parent af14e9313b
commit 84f51128e4
28 changed files with 11692 additions and 4 deletions

14
configure vendored
View File

@ -481,7 +481,6 @@ else
;; ;;
os2*) os2*)
DEFINES="$DEFINES -DUNIX -DOS2" DEFINES="$DEFINES -DUNIX -DOS2"
LIBS="$LIBS -lz"
_host_os=unix _host_os=unix
;; ;;
# given this is a shell script assume some type of unix # given this is a shell script assume some type of unix
@ -514,8 +513,7 @@ fi
if test "$_zlib" = yes ; then if test "$_zlib" = yes ; then
echo "$_zlib" echo "$_zlib"
else else
echo "none found!" echo "none found, using built-in version"
exit 1
fi fi
# #
@ -638,6 +636,7 @@ DBG="$SRC/debugger"
DBGGUI="$SRC/debugger/gui" DBGGUI="$SRC/debugger/gui"
YACC="$SRC/yacc" YACC="$SRC/yacc"
CHEAT="$SRC/cheat" CHEAT="$SRC/cheat"
ZLIB="$SRC/zlib"
INCLUDES="-I$CORE -I$COMMON -I$GUI" INCLUDES="-I$CORE -I$COMMON -I$GUI"
@ -649,7 +648,7 @@ else
_sdl_conf_libs="--libs" _sdl_conf_libs="--libs"
fi fi
LIBS="$LIBS `$_sdlconfig $_sdl_conf_libs` -lz" LIBS="$LIBS `$_sdlconfig $_sdl_conf_libs`"
LD=$CXX LD=$CXX
case $_host_os in case $_host_os in
unix) unix)
@ -679,6 +678,13 @@ case $_host_os in
;; ;;
esac esac
if test "$_zlib" = yes ; then
LIBS="$LIBS -lz"
else
MODULES="$MODULES $ZLIB"
INCLUDES="$INCLUDES -I$ZLIB"
fi
if test "$_build_gl" = yes ; then if test "$_build_gl" = yes ; then
DEFINES="$DEFINES -DDISPLAY_OPENGL" DEFINES="$DEFINES -DDISPLAY_OPENGL"
fi fi

154
src/zlib/Makefile Normal file
View File

@ -0,0 +1,154 @@
# Makefile for zlib
# Copyright (C) 1995-2005 Jean-loup Gailly.
# For conditions of distribution and use, see copyright notice in zlib.h
# To compile and test, type:
# ./configure; make test
# The call of configure is optional if you don't have special requirements
# If you wish to build zlib as a shared library, use: ./configure -s
# To use the asm code, type:
# cp contrib/asm?86/match.S ./match.S
# make LOC=-DASMV OBJA=match.o
# To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type:
# make install
# To install in $HOME instead of /usr/local, use:
# make install prefix=$HOME
CC=g++
CFLAGS=-O2 -pipe
#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
#CFLAGS=-g -DDEBUG
#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
# -Wstrict-prototypes -Wmissing-prototypes
LDFLAGS=libz.a
LDSHARED=$(CC)
CPP=$(CC) -E
LIBS=libz.a
SHAREDLIB=libz.so
SHAREDLIBV=libz.so.1.2.3
SHAREDLIBM=libz.so.1
AR=ar rc
RANLIB=ranlib
TAR=tar
SHELL=/bin/sh
EXE=
prefix = /usr/local
exec_prefix = ${prefix}
libdir = ${exec_prefix}/lib
includedir = ${prefix}/include
mandir = ${prefix}/share/man
man3dir = ${mandir}/man3
OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
zutil.o inflate.o infback.o inftrees.o inffast.o
OBJA =
# to use the asm code: make OBJA=match.o
TEST_OBJS = example.o
all: example$(EXE)
check: test
test: all
@LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
echo hello world | ./minigzip | ./minigzip -d || \
echo ' *** minigzip test FAILED ***' ; \
if ./example; then \
echo ' *** zlib test OK ***'; \
else \
echo ' *** zlib test FAILED ***'; \
fi
libz.a: $(OBJS) $(OBJA)
$(AR) $@ $(OBJS) $(OBJA)
-@ ($(RANLIB) $@ || true) >/dev/null 2>&1
match.o: match.S
$(CPP) match.S > _match.s
$(CC) -c _match.s
mv _match.o match.o
rm -f _match.s
$(SHAREDLIBV): $(OBJS)
$(LDSHARED) -o $@ $(OBJS)
rm -f $(SHAREDLIB) $(SHAREDLIBM)
ln -s $@ $(SHAREDLIB)
ln -s $@ $(SHAREDLIBM)
example$(EXE): example.o $(LIBS)
$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
minigzip$(EXE): minigzip.o $(LIBS)
$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
install: $(LIBS)
-@if [ ! -d $(exec_prefix) ]; then mkdir -p $(exec_prefix); fi
-@if [ ! -d $(includedir) ]; then mkdir -p $(includedir); fi
-@if [ ! -d $(libdir) ]; then mkdir -p $(libdir); fi
-@if [ ! -d $(man3dir) ]; then mkdir -p $(man3dir); fi
cp zlib.h zconf.h $(includedir)
chmod 644 $(includedir)/zlib.h $(includedir)/zconf.h
cp $(LIBS) $(libdir)
cd $(libdir); chmod 755 $(LIBS)
-@(cd $(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
cd $(libdir); if test -f $(SHAREDLIBV); then \
rm -f $(SHAREDLIB) $(SHAREDLIBM); \
ln -s $(SHAREDLIBV) $(SHAREDLIB); \
ln -s $(SHAREDLIBV) $(SHAREDLIBM); \
(ldconfig || true) >/dev/null 2>&1; \
fi
cp zlib.3 $(man3dir)
chmod 644 $(man3dir)/zlib.3
# The ranlib in install is needed on NeXTSTEP which checks file times
# ldconfig is for Linux
uninstall:
cd $(includedir); \
cd $(libdir); rm -f libz.a; \
if test -f $(SHAREDLIBV); then \
rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \
fi
cd $(man3dir); rm -f zlib.3
mostlyclean: clean
clean:
rm -f *.o *~ example$(EXE) minigzip$(EXE) \
libz.* foo.gz so_locations \
_match.s maketree contrib/infback9/*.o
maintainer-clean: distclean
distclean: clean
cp -p Makefile.in Makefile
cp -p zconf.in.h zconf.h
rm -f .DS_Store
tags:
etags *.[ch]
depend:
makedepend -- $(CFLAGS) -- *.[ch]
# DO NOT DELETE THIS LINE -- make depend depends on it.
adler32.o: zlib.h zconf.h
compress.o: zlib.h zconf.h
crc32.o: crc32.h zlib.h zconf.h
deflate.o: deflate.h zutil.h zlib.h zconf.h
example.o: zlib.h zconf.h
gzio.o: zutil.h zlib.h zconf.h
inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
inftrees.o: zutil.h zlib.h zconf.h inftrees.h
minigzip.o: zlib.h zconf.h
trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
uncompr.o: zlib.h zconf.h
zutil.o: zutil.h zlib.h zconf.h

143
src/zlib/adler32.c Normal file
View File

@ -0,0 +1,143 @@
/* adler32.c -- compute the Adler-32 checksum of a data stream
* Copyright (C) 1995-2004 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/* @(#) $Id$ */
#define ZLIB_INTERNAL
#include "zlib.h"
#define BASE 65521UL /* largest prime smaller than 65536 */
#define NMAX 5552
/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
#define DO1(buf,i) {adler += (buf)[i]; sum2 += adler;}
#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1);
#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2);
#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4);
#define DO16(buf) DO8(buf,0); DO8(buf,8);
/* use NO_DIVIDE if your processor does not do division in hardware */
#ifdef NO_DIVIDE
# define MOD(a) \
do { \
if (a >= (BASE << 16)) a -= (BASE << 16); \
if (a >= (BASE << 15)) a -= (BASE << 15); \
if (a >= (BASE << 14)) a -= (BASE << 14); \
if (a >= (BASE << 13)) a -= (BASE << 13); \
if (a >= (BASE << 12)) a -= (BASE << 12); \
if (a >= (BASE << 11)) a -= (BASE << 11); \
if (a >= (BASE << 10)) a -= (BASE << 10); \
if (a >= (BASE << 9)) a -= (BASE << 9); \
if (a >= (BASE << 8)) a -= (BASE << 8); \
if (a >= (BASE << 7)) a -= (BASE << 7); \
if (a >= (BASE << 6)) a -= (BASE << 6); \
if (a >= (BASE << 5)) a -= (BASE << 5); \
if (a >= (BASE << 4)) a -= (BASE << 4); \
if (a >= (BASE << 3)) a -= (BASE << 3); \
if (a >= (BASE << 2)) a -= (BASE << 2); \
if (a >= (BASE << 1)) a -= (BASE << 1); \
if (a >= BASE) a -= BASE; \
} while (0)
# define MOD4(a) \
do { \
if (a >= (BASE << 4)) a -= (BASE << 4); \
if (a >= (BASE << 3)) a -= (BASE << 3); \
if (a >= (BASE << 2)) a -= (BASE << 2); \
if (a >= (BASE << 1)) a -= (BASE << 1); \
if (a >= BASE) a -= BASE; \
} while (0)
#else
# define MOD(a) a %= BASE
# define MOD4(a) a %= BASE
#endif
/* ========================================================================= */
uLong ZEXPORT adler32(uLong adler, const Bytef *buf, uInt len)
{
unsigned long sum2;
unsigned n;
/* split Adler-32 into component sums */
sum2 = (adler >> 16) & 0xffff;
adler &= 0xffff;
/* in case user likes doing a byte at a time, keep it fast */
if (len == 1) {
adler += buf[0];
if (adler >= BASE)
adler -= BASE;
sum2 += adler;
if (sum2 >= BASE)
sum2 -= BASE;
return adler | (sum2 << 16);
}
/* initial Adler-32 value (deferred check for len == 1 speed) */
if (buf == Z_NULL)
return 1L;
/* in case short lengths are provided, keep it somewhat fast */
if (len < 16) {
while (len--) {
adler += *buf++;
sum2 += adler;
}
if (adler >= BASE)
adler -= BASE;
MOD4(sum2); /* only added so many BASE's */
return adler | (sum2 << 16);
}
/* do length NMAX blocks -- requires just one modulo operation */
while (len >= NMAX) {
len -= NMAX;
n = NMAX / 16; /* NMAX is divisible by 16 */
do {
DO16(buf); /* 16 sums unrolled */
buf += 16;
} while (--n);
MOD(adler);
MOD(sum2);
}
/* do remaining bytes (less than NMAX, still just one modulo) */
if (len) { /* avoid modulos if none remaining */
while (len >= 16) {
len -= 16;
DO16(buf);
buf += 16;
}
while (len--) {
adler += *buf++;
sum2 += adler;
}
MOD(adler);
MOD(sum2);
}
/* return recombined sums */
return adler | (sum2 << 16);
}
/* ========================================================================= */
uLong ZEXPORT adler32_combine(uLong adler1, uLong adler2, z_off_t len2)
{
unsigned long sum1;
unsigned long sum2;
unsigned rem;
/* the derivation of this formula is left as an exercise for the reader */
rem = (unsigned)(len2 % BASE);
sum1 = adler1 & 0xffff;
sum2 = rem * sum1;
MOD(sum2);
sum1 += (adler2 & 0xffff) + BASE - 1;
sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem;
if (sum1 > BASE) sum1 -= BASE;
if (sum1 > BASE) sum1 -= BASE;
if (sum2 > (BASE << 1)) sum2 -= (BASE << 1);
if (sum2 > BASE) sum2 -= BASE;
return sum1 | (sum2 << 16);
}

71
src/zlib/compress.c Normal file
View File

@ -0,0 +1,71 @@
/* compress.c -- compress a memory buffer
* Copyright (C) 1995-2003 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/* @(#) $Id$ */
#define ZLIB_INTERNAL
#include "zlib.h"
/* ===========================================================================
Compresses the source buffer into the destination buffer. The level
parameter has the same meaning as in deflateInit. sourceLen is the byte
length of the source buffer. Upon entry, destLen is the total size of the
destination buffer, which must be at least 0.1% larger than sourceLen plus
12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
memory, Z_BUF_ERROR if there was not enough room in the output buffer,
Z_STREAM_ERROR if the level parameter is invalid.
*/
int ZEXPORT compress2 (Bytef *dest, uLongf *destLen, const Bytef *source,
uLong sourceLen, int level)
{
z_stream stream;
int err;
stream.next_in = (Bytef*)source;
stream.avail_in = (uInt)sourceLen;
#ifdef MAXSEG_64K
/* Check for source > 64K on 16-bit machine: */
if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
#endif
stream.next_out = dest;
stream.avail_out = (uInt)*destLen;
if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
stream.zalloc = (alloc_func)0;
stream.zfree = (free_func)0;
stream.opaque = (voidpf)0;
err = deflateInit(&stream, level);
if (err != Z_OK) return err;
err = deflate(&stream, Z_FINISH);
if (err != Z_STREAM_END) {
deflateEnd(&stream);
return err == Z_OK ? Z_BUF_ERROR : err;
}
*destLen = stream.total_out;
err = deflateEnd(&stream);
return err;
}
/* ===========================================================================
*/
int ZEXPORT compress (Bytef *dest, uLongf *destLen,
const Bytef *source, uLong sourceLen)
{
return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION);
}
/* ===========================================================================
If the default memLevel or windowBits for deflateInit() is changed, then
this function needs to be updated.
*/
uLong ZEXPORT compressBound (uLong sourceLen)
{
return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) + 11;
}

405
src/zlib/crc32.c Normal file
View File

@ -0,0 +1,405 @@
/* crc32.c -- compute the CRC-32 of a data stream
* Copyright (C) 1995-2005 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*
* Thanks to Rodney Brown <rbrown64@csc.com.au> for his contribution of faster
* CRC methods: exclusive-oring 32 bits of data at a time, and pre-computing
* tables for updating the shift register in one step with three exclusive-ors
* instead of four steps with four exclusive-ors. This results in about a
* factor of two increase in speed on a Power PC G4 (PPC7455) using gcc -O3.
*/
/* @(#) $Id$ */
/*
Note on the use of DYNAMIC_CRC_TABLE: there is no mutex or semaphore
protection on the static variables used to control the first-use generation
of the crc tables. Therefore, if you #define DYNAMIC_CRC_TABLE, you should
first call get_crc_table() to initialize the tables before allowing more than
one thread to use crc32().
*/
#ifdef MAKECRCH
# include <stdio.h>
# ifndef DYNAMIC_CRC_TABLE
# define DYNAMIC_CRC_TABLE
# endif /* !DYNAMIC_CRC_TABLE */
#endif /* MAKECRCH */
#include "zutil.h" /* for STDC and FAR definitions */
#define local static
/* Find a four-byte integer type for crc32_little() and crc32_big(). */
#ifndef NOBYFOUR
# ifdef STDC /* need ANSI C limits.h to determine sizes */
# include <limits.h>
# define BYFOUR
# if (UINT_MAX == 0xffffffffUL)
typedef unsigned int u4;
# else
# if (ULONG_MAX == 0xffffffffUL)
typedef unsigned long u4;
# else
# if (USHRT_MAX == 0xffffffffUL)
typedef unsigned short u4;
# else
# undef BYFOUR /* can't find a four-byte integer type! */
# endif
# endif
# endif
# endif /* STDC */
#endif /* !NOBYFOUR */
/* Definitions for doing the crc four data bytes at a time. */
#ifdef BYFOUR
# define REV(w) (((w)>>24)+(((w)>>8)&0xff00)+ \
(((w)&0xff00)<<8)+(((w)&0xff)<<24))
local unsigned long crc32_little OF((unsigned long,
const unsigned char FAR *, unsigned));
local unsigned long crc32_big OF((unsigned long,
const unsigned char FAR *, unsigned));
# define TBLS 8
#else
# define TBLS 1
#endif /* BYFOUR */
/* Local functions for crc concatenation */
local unsigned long gf2_matrix_times OF((unsigned long *mat,
unsigned long vec));
local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat));
#ifdef DYNAMIC_CRC_TABLE
local volatile int crc_table_empty = 1;
local unsigned long FAR crc_table[TBLS][256];
local void make_crc_table OF((void));
#ifdef MAKECRCH
local void write_table OF((FILE *, const unsigned long FAR *));
#endif /* MAKECRCH */
/*
Generate tables for a byte-wise 32-bit CRC calculation on the polynomial:
x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1.
Polynomials over GF(2) are represented in binary, one bit per coefficient,
with the lowest powers in the most significant bit. Then adding polynomials
is just exclusive-or, and multiplying a polynomial by x is a right shift by
one. If we call the above polynomial p, and represent a byte as the
polynomial q, also with the lowest power in the most significant bit (so the
byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p,
where a mod b means the remainder after dividing a by b.
This calculation is done using the shift-register method of multiplying and
taking the remainder. The register is initialized to zero, and for each
incoming bit, x^32 is added mod p to the register if the bit is a one (where
x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by
x (which is shifting right by one and adding x^32 mod p if the bit shifted
out is a one). We start with the highest power (least significant bit) of
q and repeat for all eight bits of q.
The first table is simply the CRC of all possible eight bit values. This is
all the information needed to generate CRCs on data a byte at a time for all
combinations of CRC register values and incoming bytes. The remaining tables
allow for word-at-a-time CRC calculation for both big-endian and little-
endian machines, where a word is four bytes.
*/
local void make_crc_table()
{
unsigned long c;
int n, k;
unsigned long poly; /* polynomial exclusive-or pattern */
/* terms of polynomial defining this crc (except x^32): */
static volatile int first = 1; /* flag to limit concurrent making */
static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
/* See if another task is already doing this (not thread-safe, but better
than nothing -- significantly reduces duration of vulnerability in
case the advice about DYNAMIC_CRC_TABLE is ignored) */
if (first) {
first = 0;
/* make exclusive-or pattern from polynomial (0xedb88320UL) */
poly = 0UL;
for (n = 0; n < sizeof(p)/sizeof(unsigned char); n++)
poly |= 1UL << (31 - p[n]);
/* generate a crc for every 8-bit value */
for (n = 0; n < 256; n++) {
c = (unsigned long)n;
for (k = 0; k < 8; k++)
c = c & 1 ? poly ^ (c >> 1) : c >> 1;
crc_table[0][n] = c;
}
#ifdef BYFOUR
/* generate crc for each value followed by one, two, and three zeros,
and then the byte reversal of those as well as the first table */
for (n = 0; n < 256; n++) {
c = crc_table[0][n];
crc_table[4][n] = REV(c);
for (k = 1; k < 4; k++) {
c = crc_table[0][c & 0xff] ^ (c >> 8);
crc_table[k][n] = c;
crc_table[k + 4][n] = REV(c);
}
}
#endif /* BYFOUR */
crc_table_empty = 0;
}
else { /* not first */
/* wait for the other guy to finish (not efficient, but rare) */
while (crc_table_empty)
;
}
#ifdef MAKECRCH
/* write out CRC tables to crc32.h */
{
FILE *out;
out = fopen("crc32.h", "w");
if (out == NULL) return;
fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n");
fprintf(out, " * Generated automatically by crc32.c\n */\n\n");
fprintf(out, "local const unsigned long FAR ");
fprintf(out, "crc_table[TBLS][256] =\n{\n {\n");
write_table(out, crc_table[0]);
# ifdef BYFOUR
fprintf(out, "#ifdef BYFOUR\n");
for (k = 1; k < 8; k++) {
fprintf(out, " },\n {\n");
write_table(out, crc_table[k]);
}
fprintf(out, "#endif\n");
# endif /* BYFOUR */
fprintf(out, " }\n};\n");
fclose(out);
}
#endif /* MAKECRCH */
}
#ifdef MAKECRCH
local void write_table(FILE *out, const unsigned long FAR *table)
{
int n;
for (n = 0; n < 256; n++)
fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : " ", table[n],
n == 255 ? "\n" : (n % 5 == 4 ? ",\n" : ", "));
}
#endif /* MAKECRCH */
#else /* !DYNAMIC_CRC_TABLE */
/* ========================================================================
* Tables of CRC-32s of all single-byte values, made by make_crc_table().
*/
#include "crc32.h"
#endif /* DYNAMIC_CRC_TABLE */
/* =========================================================================
* This function can be used by asm versions of crc32()
*/
const unsigned long FAR * ZEXPORT get_crc_table()
{
#ifdef DYNAMIC_CRC_TABLE
if (crc_table_empty)
make_crc_table();
#endif /* DYNAMIC_CRC_TABLE */
return (const unsigned long FAR *)crc_table;
}
/* ========================================================================= */
#define DO1 crc = crc_table[0][((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8)
#define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1
/* ========================================================================= */
unsigned long ZEXPORT crc32(unsigned long crc, const unsigned char FAR *buf, unsigned len)
{
if (buf == Z_NULL) return 0UL;
#ifdef DYNAMIC_CRC_TABLE
if (crc_table_empty)
make_crc_table();
#endif /* DYNAMIC_CRC_TABLE */
#ifdef BYFOUR
if (sizeof(void *) == sizeof(ptrdiff_t)) {
u4 endian;
endian = 1;
if (*((unsigned char *)(&endian)))
return crc32_little(crc, buf, len);
else
return crc32_big(crc, buf, len);
}
#endif /* BYFOUR */
crc = crc ^ 0xffffffffUL;
while (len >= 8) {
DO8;
len -= 8;
}
if (len) do {
DO1;
} while (--len);
return crc ^ 0xffffffffUL;
}
#ifdef BYFOUR
/* ========================================================================= */
#define DOLIT4 c ^= *buf4++; \
c = crc_table[3][c & 0xff] ^ crc_table[2][(c >> 8) & 0xff] ^ \
crc_table[1][(c >> 16) & 0xff] ^ crc_table[0][c >> 24]
#define DOLIT32 DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4
/* ========================================================================= */
local unsigned long crc32_little(unsigned long crc, const unsigned char FAR *buf, unsigned len)
{
register u4 c;
register const u4 FAR *buf4;
c = (u4)crc;
c = ~c;
while (len && ((ptrdiff_t)buf & 3)) {
c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
len--;
}
buf4 = (const u4 FAR *)(const void FAR *)buf;
while (len >= 32) {
DOLIT32;
len -= 32;
}
while (len >= 4) {
DOLIT4;
len -= 4;
}
buf = (const unsigned char FAR *)buf4;
if (len) do {
c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
} while (--len);
c = ~c;
return (unsigned long)c;
}
/* ========================================================================= */
#define DOBIG4 c ^= *++buf4; \
c = crc_table[4][c & 0xff] ^ crc_table[5][(c >> 8) & 0xff] ^ \
crc_table[6][(c >> 16) & 0xff] ^ crc_table[7][c >> 24]
#define DOBIG32 DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4
/* ========================================================================= */
local unsigned long crc32_big(unsigned long crc, const unsigned char FAR *buf, unsigned len)
{
register u4 c;
register const u4 FAR *buf4;
c = REV((u4)crc);
c = ~c;
while (len && ((ptrdiff_t)buf & 3)) {
c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
len--;
}
buf4 = (const u4 FAR *)(const void FAR *)buf;
buf4--;
while (len >= 32) {
DOBIG32;
len -= 32;
}
while (len >= 4) {
DOBIG4;
len -= 4;
}
buf4++;
buf = (const unsigned char FAR *)buf4;
if (len) do {
c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
} while (--len);
c = ~c;
return (unsigned long)(REV(c));
}
#endif /* BYFOUR */
#define GF2_DIM 32 /* dimension of GF(2) vectors (length of CRC) */
/* ========================================================================= */
local unsigned long gf2_matrix_times(unsigned long *mat, unsigned long vec)
{
unsigned long sum;
sum = 0;
while (vec) {
if (vec & 1)
sum ^= *mat;
vec >>= 1;
mat++;
}
return sum;
}
/* ========================================================================= */
local void gf2_matrix_square(unsigned long *square, unsigned long *mat)
{
int n;
for (n = 0; n < GF2_DIM; n++)
square[n] = gf2_matrix_times(mat, mat[n]);
}
/* ========================================================================= */
uLong ZEXPORT crc32_combine(uLong crc1, uLong crc2, z_off_t len2)
{
int n;
unsigned long row;
unsigned long even[GF2_DIM]; /* even-power-of-two zeros operator */
unsigned long odd[GF2_DIM]; /* odd-power-of-two zeros operator */
/* degenerate case */
if (len2 == 0)
return crc1;
/* put operator for one zero bit in odd */
odd[0] = 0xedb88320L; /* CRC-32 polynomial */
row = 1;
for (n = 1; n < GF2_DIM; n++) {
odd[n] = row;
row <<= 1;
}
/* put operator for two zero bits in even */
gf2_matrix_square(even, odd);
/* put operator for four zero bits in odd */
gf2_matrix_square(odd, even);
/* apply len2 zeros to crc1 (first square will put the operator for one
zero byte, eight zero bits, in even) */
do {
/* apply zeros operator for this bit of len2 */
gf2_matrix_square(even, odd);
if (len2 & 1)
crc1 = gf2_matrix_times(even, crc1);
len2 >>= 1;
/* if no more bits set, then done */
if (len2 == 0)
break;
/* another iteration of the loop with odd and even swapped */
gf2_matrix_square(odd, even);
if (len2 & 1)
crc1 = gf2_matrix_times(odd, crc1);
len2 >>= 1;
/* if no more bits set, then done */
} while (len2 != 0);
/* return combined crc */
crc1 ^= crc2;
return crc1;
}

441
src/zlib/crc32.h Normal file
View File

@ -0,0 +1,441 @@
/* crc32.h -- tables for rapid CRC calculation
* Generated automatically by crc32.c
*/
local const unsigned long FAR crc_table[TBLS][256] =
{
{
0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL,
0x706af48fUL, 0xe963a535UL, 0x9e6495a3UL, 0x0edb8832UL, 0x79dcb8a4UL,
0xe0d5e91eUL, 0x97d2d988UL, 0x09b64c2bUL, 0x7eb17cbdUL, 0xe7b82d07UL,
0x90bf1d91UL, 0x1db71064UL, 0x6ab020f2UL, 0xf3b97148UL, 0x84be41deUL,
0x1adad47dUL, 0x6ddde4ebUL, 0xf4d4b551UL, 0x83d385c7UL, 0x136c9856UL,
0x646ba8c0UL, 0xfd62f97aUL, 0x8a65c9ecUL, 0x14015c4fUL, 0x63066cd9UL,
0xfa0f3d63UL, 0x8d080df5UL, 0x3b6e20c8UL, 0x4c69105eUL, 0xd56041e4UL,
0xa2677172UL, 0x3c03e4d1UL, 0x4b04d447UL, 0xd20d85fdUL, 0xa50ab56bUL,
0x35b5a8faUL, 0x42b2986cUL, 0xdbbbc9d6UL, 0xacbcf940UL, 0x32d86ce3UL,
0x45df5c75UL, 0xdcd60dcfUL, 0xabd13d59UL, 0x26d930acUL, 0x51de003aUL,
0xc8d75180UL, 0xbfd06116UL, 0x21b4f4b5UL, 0x56b3c423UL, 0xcfba9599UL,
0xb8bda50fUL, 0x2802b89eUL, 0x5f058808UL, 0xc60cd9b2UL, 0xb10be924UL,
0x2f6f7c87UL, 0x58684c11UL, 0xc1611dabUL, 0xb6662d3dUL, 0x76dc4190UL,
0x01db7106UL, 0x98d220bcUL, 0xefd5102aUL, 0x71b18589UL, 0x06b6b51fUL,
0x9fbfe4a5UL, 0xe8b8d433UL, 0x7807c9a2UL, 0x0f00f934UL, 0x9609a88eUL,
0xe10e9818UL, 0x7f6a0dbbUL, 0x086d3d2dUL, 0x91646c97UL, 0xe6635c01UL,
0x6b6b51f4UL, 0x1c6c6162UL, 0x856530d8UL, 0xf262004eUL, 0x6c0695edUL,
0x1b01a57bUL, 0x8208f4c1UL, 0xf50fc457UL, 0x65b0d9c6UL, 0x12b7e950UL,
0x8bbeb8eaUL, 0xfcb9887cUL, 0x62dd1ddfUL, 0x15da2d49UL, 0x8cd37cf3UL,
0xfbd44c65UL, 0x4db26158UL, 0x3ab551ceUL, 0xa3bc0074UL, 0xd4bb30e2UL,
0x4adfa541UL, 0x3dd895d7UL, 0xa4d1c46dUL, 0xd3d6f4fbUL, 0x4369e96aUL,
0x346ed9fcUL, 0xad678846UL, 0xda60b8d0UL, 0x44042d73UL, 0x33031de5UL,
0xaa0a4c5fUL, 0xdd0d7cc9UL, 0x5005713cUL, 0x270241aaUL, 0xbe0b1010UL,
0xc90c2086UL, 0x5768b525UL, 0x206f85b3UL, 0xb966d409UL, 0xce61e49fUL,
0x5edef90eUL, 0x29d9c998UL, 0xb0d09822UL, 0xc7d7a8b4UL, 0x59b33d17UL,
0x2eb40d81UL, 0xb7bd5c3bUL, 0xc0ba6cadUL, 0xedb88320UL, 0x9abfb3b6UL,
0x03b6e20cUL, 0x74b1d29aUL, 0xead54739UL, 0x9dd277afUL, 0x04db2615UL,
0x73dc1683UL, 0xe3630b12UL, 0x94643b84UL, 0x0d6d6a3eUL, 0x7a6a5aa8UL,
0xe40ecf0bUL, 0x9309ff9dUL, 0x0a00ae27UL, 0x7d079eb1UL, 0xf00f9344UL,
0x8708a3d2UL, 0x1e01f268UL, 0x6906c2feUL, 0xf762575dUL, 0x806567cbUL,
0x196c3671UL, 0x6e6b06e7UL, 0xfed41b76UL, 0x89d32be0UL, 0x10da7a5aUL,
0x67dd4accUL, 0xf9b9df6fUL, 0x8ebeeff9UL, 0x17b7be43UL, 0x60b08ed5UL,
0xd6d6a3e8UL, 0xa1d1937eUL, 0x38d8c2c4UL, 0x4fdff252UL, 0xd1bb67f1UL,
0xa6bc5767UL, 0x3fb506ddUL, 0x48b2364bUL, 0xd80d2bdaUL, 0xaf0a1b4cUL,
0x36034af6UL, 0x41047a60UL, 0xdf60efc3UL, 0xa867df55UL, 0x316e8eefUL,
0x4669be79UL, 0xcb61b38cUL, 0xbc66831aUL, 0x256fd2a0UL, 0x5268e236UL,
0xcc0c7795UL, 0xbb0b4703UL, 0x220216b9UL, 0x5505262fUL, 0xc5ba3bbeUL,
0xb2bd0b28UL, 0x2bb45a92UL, 0x5cb36a04UL, 0xc2d7ffa7UL, 0xb5d0cf31UL,
0x2cd99e8bUL, 0x5bdeae1dUL, 0x9b64c2b0UL, 0xec63f226UL, 0x756aa39cUL,
0x026d930aUL, 0x9c0906a9UL, 0xeb0e363fUL, 0x72076785UL, 0x05005713UL,
0x95bf4a82UL, 0xe2b87a14UL, 0x7bb12baeUL, 0x0cb61b38UL, 0x92d28e9bUL,
0xe5d5be0dUL, 0x7cdcefb7UL, 0x0bdbdf21UL, 0x86d3d2d4UL, 0xf1d4e242UL,
0x68ddb3f8UL, 0x1fda836eUL, 0x81be16cdUL, 0xf6b9265bUL, 0x6fb077e1UL,
0x18b74777UL, 0x88085ae6UL, 0xff0f6a70UL, 0x66063bcaUL, 0x11010b5cUL,
0x8f659effUL, 0xf862ae69UL, 0x616bffd3UL, 0x166ccf45UL, 0xa00ae278UL,
0xd70dd2eeUL, 0x4e048354UL, 0x3903b3c2UL, 0xa7672661UL, 0xd06016f7UL,
0x4969474dUL, 0x3e6e77dbUL, 0xaed16a4aUL, 0xd9d65adcUL, 0x40df0b66UL,
0x37d83bf0UL, 0xa9bcae53UL, 0xdebb9ec5UL, 0x47b2cf7fUL, 0x30b5ffe9UL,
0xbdbdf21cUL, 0xcabac28aUL, 0x53b39330UL, 0x24b4a3a6UL, 0xbad03605UL,
0xcdd70693UL, 0x54de5729UL, 0x23d967bfUL, 0xb3667a2eUL, 0xc4614ab8UL,
0x5d681b02UL, 0x2a6f2b94UL, 0xb40bbe37UL, 0xc30c8ea1UL, 0x5a05df1bUL,
0x2d02ef8dUL
#ifdef BYFOUR
},
{
0x00000000UL, 0x191b3141UL, 0x32366282UL, 0x2b2d53c3UL, 0x646cc504UL,
0x7d77f445UL, 0x565aa786UL, 0x4f4196c7UL, 0xc8d98a08UL, 0xd1c2bb49UL,
0xfaefe88aUL, 0xe3f4d9cbUL, 0xacb54f0cUL, 0xb5ae7e4dUL, 0x9e832d8eUL,
0x87981ccfUL, 0x4ac21251UL, 0x53d92310UL, 0x78f470d3UL, 0x61ef4192UL,
0x2eaed755UL, 0x37b5e614UL, 0x1c98b5d7UL, 0x05838496UL, 0x821b9859UL,
0x9b00a918UL, 0xb02dfadbUL, 0xa936cb9aUL, 0xe6775d5dUL, 0xff6c6c1cUL,
0xd4413fdfUL, 0xcd5a0e9eUL, 0x958424a2UL, 0x8c9f15e3UL, 0xa7b24620UL,
0xbea97761UL, 0xf1e8e1a6UL, 0xe8f3d0e7UL, 0xc3de8324UL, 0xdac5b265UL,
0x5d5daeaaUL, 0x44469febUL, 0x6f6bcc28UL, 0x7670fd69UL, 0x39316baeUL,
0x202a5aefUL, 0x0b07092cUL, 0x121c386dUL, 0xdf4636f3UL, 0xc65d07b2UL,
0xed705471UL, 0xf46b6530UL, 0xbb2af3f7UL, 0xa231c2b6UL, 0x891c9175UL,
0x9007a034UL, 0x179fbcfbUL, 0x0e848dbaUL, 0x25a9de79UL, 0x3cb2ef38UL,
0x73f379ffUL, 0x6ae848beUL, 0x41c51b7dUL, 0x58de2a3cUL, 0xf0794f05UL,
0xe9627e44UL, 0xc24f2d87UL, 0xdb541cc6UL, 0x94158a01UL, 0x8d0ebb40UL,
0xa623e883UL, 0xbf38d9c2UL, 0x38a0c50dUL, 0x21bbf44cUL, 0x0a96a78fUL,
0x138d96ceUL, 0x5ccc0009UL, 0x45d73148UL, 0x6efa628bUL, 0x77e153caUL,
0xbabb5d54UL, 0xa3a06c15UL, 0x888d3fd6UL, 0x91960e97UL, 0xded79850UL,
0xc7cca911UL, 0xece1fad2UL, 0xf5facb93UL, 0x7262d75cUL, 0x6b79e61dUL,
0x4054b5deUL, 0x594f849fUL, 0x160e1258UL, 0x0f152319UL, 0x243870daUL,
0x3d23419bUL, 0x65fd6ba7UL, 0x7ce65ae6UL, 0x57cb0925UL, 0x4ed03864UL,
0x0191aea3UL, 0x188a9fe2UL, 0x33a7cc21UL, 0x2abcfd60UL, 0xad24e1afUL,
0xb43fd0eeUL, 0x9f12832dUL, 0x8609b26cUL, 0xc94824abUL, 0xd05315eaUL,
0xfb7e4629UL, 0xe2657768UL, 0x2f3f79f6UL, 0x362448b7UL, 0x1d091b74UL,
0x04122a35UL, 0x4b53bcf2UL, 0x52488db3UL, 0x7965de70UL, 0x607eef31UL,
0xe7e6f3feUL, 0xfefdc2bfUL, 0xd5d0917cUL, 0xcccba03dUL, 0x838a36faUL,
0x9a9107bbUL, 0xb1bc5478UL, 0xa8a76539UL, 0x3b83984bUL, 0x2298a90aUL,
0x09b5fac9UL, 0x10aecb88UL, 0x5fef5d4fUL, 0x46f46c0eUL, 0x6dd93fcdUL,
0x74c20e8cUL, 0xf35a1243UL, 0xea412302UL, 0xc16c70c1UL, 0xd8774180UL,
0x9736d747UL, 0x8e2de606UL, 0xa500b5c5UL, 0xbc1b8484UL, 0x71418a1aUL,
0x685abb5bUL, 0x4377e898UL, 0x5a6cd9d9UL, 0x152d4f1eUL, 0x0c367e5fUL,
0x271b2d9cUL, 0x3e001cddUL, 0xb9980012UL, 0xa0833153UL, 0x8bae6290UL,
0x92b553d1UL, 0xddf4c516UL, 0xc4eff457UL, 0xefc2a794UL, 0xf6d996d5UL,
0xae07bce9UL, 0xb71c8da8UL, 0x9c31de6bUL, 0x852aef2aUL, 0xca6b79edUL,
0xd37048acUL, 0xf85d1b6fUL, 0xe1462a2eUL, 0x66de36e1UL, 0x7fc507a0UL,
0x54e85463UL, 0x4df36522UL, 0x02b2f3e5UL, 0x1ba9c2a4UL, 0x30849167UL,
0x299fa026UL, 0xe4c5aeb8UL, 0xfdde9ff9UL, 0xd6f3cc3aUL, 0xcfe8fd7bUL,
0x80a96bbcUL, 0x99b25afdUL, 0xb29f093eUL, 0xab84387fUL, 0x2c1c24b0UL,
0x350715f1UL, 0x1e2a4632UL, 0x07317773UL, 0x4870e1b4UL, 0x516bd0f5UL,
0x7a468336UL, 0x635db277UL, 0xcbfad74eUL, 0xd2e1e60fUL, 0xf9ccb5ccUL,
0xe0d7848dUL, 0xaf96124aUL, 0xb68d230bUL, 0x9da070c8UL, 0x84bb4189UL,
0x03235d46UL, 0x1a386c07UL, 0x31153fc4UL, 0x280e0e85UL, 0x674f9842UL,
0x7e54a903UL, 0x5579fac0UL, 0x4c62cb81UL, 0x8138c51fUL, 0x9823f45eUL,
0xb30ea79dUL, 0xaa1596dcUL, 0xe554001bUL, 0xfc4f315aUL, 0xd7626299UL,
0xce7953d8UL, 0x49e14f17UL, 0x50fa7e56UL, 0x7bd72d95UL, 0x62cc1cd4UL,
0x2d8d8a13UL, 0x3496bb52UL, 0x1fbbe891UL, 0x06a0d9d0UL, 0x5e7ef3ecUL,
0x4765c2adUL, 0x6c48916eUL, 0x7553a02fUL, 0x3a1236e8UL, 0x230907a9UL,
0x0824546aUL, 0x113f652bUL, 0x96a779e4UL, 0x8fbc48a5UL, 0xa4911b66UL,
0xbd8a2a27UL, 0xf2cbbce0UL, 0xebd08da1UL, 0xc0fdde62UL, 0xd9e6ef23UL,
0x14bce1bdUL, 0x0da7d0fcUL, 0x268a833fUL, 0x3f91b27eUL, 0x70d024b9UL,
0x69cb15f8UL, 0x42e6463bUL, 0x5bfd777aUL, 0xdc656bb5UL, 0xc57e5af4UL,
0xee530937UL, 0xf7483876UL, 0xb809aeb1UL, 0xa1129ff0UL, 0x8a3fcc33UL,
0x9324fd72UL
},
{
0x00000000UL, 0x01c26a37UL, 0x0384d46eUL, 0x0246be59UL, 0x0709a8dcUL,
0x06cbc2ebUL, 0x048d7cb2UL, 0x054f1685UL, 0x0e1351b8UL, 0x0fd13b8fUL,
0x0d9785d6UL, 0x0c55efe1UL, 0x091af964UL, 0x08d89353UL, 0x0a9e2d0aUL,
0x0b5c473dUL, 0x1c26a370UL, 0x1de4c947UL, 0x1fa2771eUL, 0x1e601d29UL,
0x1b2f0bacUL, 0x1aed619bUL, 0x18abdfc2UL, 0x1969b5f5UL, 0x1235f2c8UL,
0x13f798ffUL, 0x11b126a6UL, 0x10734c91UL, 0x153c5a14UL, 0x14fe3023UL,
0x16b88e7aUL, 0x177ae44dUL, 0x384d46e0UL, 0x398f2cd7UL, 0x3bc9928eUL,
0x3a0bf8b9UL, 0x3f44ee3cUL, 0x3e86840bUL, 0x3cc03a52UL, 0x3d025065UL,
0x365e1758UL, 0x379c7d6fUL, 0x35dac336UL, 0x3418a901UL, 0x3157bf84UL,
0x3095d5b3UL, 0x32d36beaUL, 0x331101ddUL, 0x246be590UL, 0x25a98fa7UL,
0x27ef31feUL, 0x262d5bc9UL, 0x23624d4cUL, 0x22a0277bUL, 0x20e69922UL,
0x2124f315UL, 0x2a78b428UL, 0x2bbade1fUL, 0x29fc6046UL, 0x283e0a71UL,
0x2d711cf4UL, 0x2cb376c3UL, 0x2ef5c89aUL, 0x2f37a2adUL, 0x709a8dc0UL,
0x7158e7f7UL, 0x731e59aeUL, 0x72dc3399UL, 0x7793251cUL, 0x76514f2bUL,
0x7417f172UL, 0x75d59b45UL, 0x7e89dc78UL, 0x7f4bb64fUL, 0x7d0d0816UL,
0x7ccf6221UL, 0x798074a4UL, 0x78421e93UL, 0x7a04a0caUL, 0x7bc6cafdUL,
0x6cbc2eb0UL, 0x6d7e4487UL, 0x6f38fadeUL, 0x6efa90e9UL, 0x6bb5866cUL,
0x6a77ec5bUL, 0x68315202UL, 0x69f33835UL, 0x62af7f08UL, 0x636d153fUL,
0x612bab66UL, 0x60e9c151UL, 0x65a6d7d4UL, 0x6464bde3UL, 0x662203baUL,
0x67e0698dUL, 0x48d7cb20UL, 0x4915a117UL, 0x4b531f4eUL, 0x4a917579UL,
0x4fde63fcUL, 0x4e1c09cbUL, 0x4c5ab792UL, 0x4d98dda5UL, 0x46c49a98UL,
0x4706f0afUL, 0x45404ef6UL, 0x448224c1UL, 0x41cd3244UL, 0x400f5873UL,
0x4249e62aUL, 0x438b8c1dUL, 0x54f16850UL, 0x55330267UL, 0x5775bc3eUL,
0x56b7d609UL, 0x53f8c08cUL, 0x523aaabbUL, 0x507c14e2UL, 0x51be7ed5UL,
0x5ae239e8UL, 0x5b2053dfUL, 0x5966ed86UL, 0x58a487b1UL, 0x5deb9134UL,
0x5c29fb03UL, 0x5e6f455aUL, 0x5fad2f6dUL, 0xe1351b80UL, 0xe0f771b7UL,
0xe2b1cfeeUL, 0xe373a5d9UL, 0xe63cb35cUL, 0xe7fed96bUL, 0xe5b86732UL,
0xe47a0d05UL, 0xef264a38UL, 0xeee4200fUL, 0xeca29e56UL, 0xed60f461UL,
0xe82fe2e4UL, 0xe9ed88d3UL, 0xebab368aUL, 0xea695cbdUL, 0xfd13b8f0UL,
0xfcd1d2c7UL, 0xfe976c9eUL, 0xff5506a9UL, 0xfa1a102cUL, 0xfbd87a1bUL,
0xf99ec442UL, 0xf85cae75UL, 0xf300e948UL, 0xf2c2837fUL, 0xf0843d26UL,
0xf1465711UL, 0xf4094194UL, 0xf5cb2ba3UL, 0xf78d95faUL, 0xf64fffcdUL,
0xd9785d60UL, 0xd8ba3757UL, 0xdafc890eUL, 0xdb3ee339UL, 0xde71f5bcUL,
0xdfb39f8bUL, 0xddf521d2UL, 0xdc374be5UL, 0xd76b0cd8UL, 0xd6a966efUL,
0xd4efd8b6UL, 0xd52db281UL, 0xd062a404UL, 0xd1a0ce33UL, 0xd3e6706aUL,
0xd2241a5dUL, 0xc55efe10UL, 0xc49c9427UL, 0xc6da2a7eUL, 0xc7184049UL,
0xc25756ccUL, 0xc3953cfbUL, 0xc1d382a2UL, 0xc011e895UL, 0xcb4dafa8UL,
0xca8fc59fUL, 0xc8c97bc6UL, 0xc90b11f1UL, 0xcc440774UL, 0xcd866d43UL,
0xcfc0d31aUL, 0xce02b92dUL, 0x91af9640UL, 0x906dfc77UL, 0x922b422eUL,
0x93e92819UL, 0x96a63e9cUL, 0x976454abUL, 0x9522eaf2UL, 0x94e080c5UL,
0x9fbcc7f8UL, 0x9e7eadcfUL, 0x9c381396UL, 0x9dfa79a1UL, 0x98b56f24UL,
0x99770513UL, 0x9b31bb4aUL, 0x9af3d17dUL, 0x8d893530UL, 0x8c4b5f07UL,
0x8e0de15eUL, 0x8fcf8b69UL, 0x8a809decUL, 0x8b42f7dbUL, 0x89044982UL,
0x88c623b5UL, 0x839a6488UL, 0x82580ebfUL, 0x801eb0e6UL, 0x81dcdad1UL,
0x8493cc54UL, 0x8551a663UL, 0x8717183aUL, 0x86d5720dUL, 0xa9e2d0a0UL,
0xa820ba97UL, 0xaa6604ceUL, 0xaba46ef9UL, 0xaeeb787cUL, 0xaf29124bUL,
0xad6fac12UL, 0xacadc625UL, 0xa7f18118UL, 0xa633eb2fUL, 0xa4755576UL,
0xa5b73f41UL, 0xa0f829c4UL, 0xa13a43f3UL, 0xa37cfdaaUL, 0xa2be979dUL,
0xb5c473d0UL, 0xb40619e7UL, 0xb640a7beUL, 0xb782cd89UL, 0xb2cddb0cUL,
0xb30fb13bUL, 0xb1490f62UL, 0xb08b6555UL, 0xbbd72268UL, 0xba15485fUL,
0xb853f606UL, 0xb9919c31UL, 0xbcde8ab4UL, 0xbd1ce083UL, 0xbf5a5edaUL,
0xbe9834edUL
},
{
0x00000000UL, 0xb8bc6765UL, 0xaa09c88bUL, 0x12b5afeeUL, 0x8f629757UL,
0x37def032UL, 0x256b5fdcUL, 0x9dd738b9UL, 0xc5b428efUL, 0x7d084f8aUL,
0x6fbde064UL, 0xd7018701UL, 0x4ad6bfb8UL, 0xf26ad8ddUL, 0xe0df7733UL,
0x58631056UL, 0x5019579fUL, 0xe8a530faUL, 0xfa109f14UL, 0x42acf871UL,
0xdf7bc0c8UL, 0x67c7a7adUL, 0x75720843UL, 0xcdce6f26UL, 0x95ad7f70UL,
0x2d111815UL, 0x3fa4b7fbUL, 0x8718d09eUL, 0x1acfe827UL, 0xa2738f42UL,
0xb0c620acUL, 0x087a47c9UL, 0xa032af3eUL, 0x188ec85bUL, 0x0a3b67b5UL,
0xb28700d0UL, 0x2f503869UL, 0x97ec5f0cUL, 0x8559f0e2UL, 0x3de59787UL,
0x658687d1UL, 0xdd3ae0b4UL, 0xcf8f4f5aUL, 0x7733283fUL, 0xeae41086UL,
0x525877e3UL, 0x40edd80dUL, 0xf851bf68UL, 0xf02bf8a1UL, 0x48979fc4UL,
0x5a22302aUL, 0xe29e574fUL, 0x7f496ff6UL, 0xc7f50893UL, 0xd540a77dUL,
0x6dfcc018UL, 0x359fd04eUL, 0x8d23b72bUL, 0x9f9618c5UL, 0x272a7fa0UL,
0xbafd4719UL, 0x0241207cUL, 0x10f48f92UL, 0xa848e8f7UL, 0x9b14583dUL,
0x23a83f58UL, 0x311d90b6UL, 0x89a1f7d3UL, 0x1476cf6aUL, 0xaccaa80fUL,
0xbe7f07e1UL, 0x06c36084UL, 0x5ea070d2UL, 0xe61c17b7UL, 0xf4a9b859UL,
0x4c15df3cUL, 0xd1c2e785UL, 0x697e80e0UL, 0x7bcb2f0eUL, 0xc377486bUL,
0xcb0d0fa2UL, 0x73b168c7UL, 0x6104c729UL, 0xd9b8a04cUL, 0x446f98f5UL,
0xfcd3ff90UL, 0xee66507eUL, 0x56da371bUL, 0x0eb9274dUL, 0xb6054028UL,
0xa4b0efc6UL, 0x1c0c88a3UL, 0x81dbb01aUL, 0x3967d77fUL, 0x2bd27891UL,
0x936e1ff4UL, 0x3b26f703UL, 0x839a9066UL, 0x912f3f88UL, 0x299358edUL,
0xb4446054UL, 0x0cf80731UL, 0x1e4da8dfUL, 0xa6f1cfbaUL, 0xfe92dfecUL,
0x462eb889UL, 0x549b1767UL, 0xec277002UL, 0x71f048bbUL, 0xc94c2fdeUL,
0xdbf98030UL, 0x6345e755UL, 0x6b3fa09cUL, 0xd383c7f9UL, 0xc1366817UL,
0x798a0f72UL, 0xe45d37cbUL, 0x5ce150aeUL, 0x4e54ff40UL, 0xf6e89825UL,
0xae8b8873UL, 0x1637ef16UL, 0x048240f8UL, 0xbc3e279dUL, 0x21e91f24UL,
0x99557841UL, 0x8be0d7afUL, 0x335cb0caUL, 0xed59b63bUL, 0x55e5d15eUL,
0x47507eb0UL, 0xffec19d5UL, 0x623b216cUL, 0xda874609UL, 0xc832e9e7UL,
0x708e8e82UL, 0x28ed9ed4UL, 0x9051f9b1UL, 0x82e4565fUL, 0x3a58313aUL,
0xa78f0983UL, 0x1f336ee6UL, 0x0d86c108UL, 0xb53aa66dUL, 0xbd40e1a4UL,
0x05fc86c1UL, 0x1749292fUL, 0xaff54e4aUL, 0x322276f3UL, 0x8a9e1196UL,
0x982bbe78UL, 0x2097d91dUL, 0x78f4c94bUL, 0xc048ae2eUL, 0xd2fd01c0UL,
0x6a4166a5UL, 0xf7965e1cUL, 0x4f2a3979UL, 0x5d9f9697UL, 0xe523f1f2UL,
0x4d6b1905UL, 0xf5d77e60UL, 0xe762d18eUL, 0x5fdeb6ebUL, 0xc2098e52UL,
0x7ab5e937UL, 0x680046d9UL, 0xd0bc21bcUL, 0x88df31eaUL, 0x3063568fUL,
0x22d6f961UL, 0x9a6a9e04UL, 0x07bda6bdUL, 0xbf01c1d8UL, 0xadb46e36UL,
0x15080953UL, 0x1d724e9aUL, 0xa5ce29ffUL, 0xb77b8611UL, 0x0fc7e174UL,
0x9210d9cdUL, 0x2aacbea8UL, 0x38191146UL, 0x80a57623UL, 0xd8c66675UL,
0x607a0110UL, 0x72cfaefeUL, 0xca73c99bUL, 0x57a4f122UL, 0xef189647UL,
0xfdad39a9UL, 0x45115eccUL, 0x764dee06UL, 0xcef18963UL, 0xdc44268dUL,
0x64f841e8UL, 0xf92f7951UL, 0x41931e34UL, 0x5326b1daUL, 0xeb9ad6bfUL,
0xb3f9c6e9UL, 0x0b45a18cUL, 0x19f00e62UL, 0xa14c6907UL, 0x3c9b51beUL,
0x842736dbUL, 0x96929935UL, 0x2e2efe50UL, 0x2654b999UL, 0x9ee8defcUL,
0x8c5d7112UL, 0x34e11677UL, 0xa9362eceUL, 0x118a49abUL, 0x033fe645UL,
0xbb838120UL, 0xe3e09176UL, 0x5b5cf613UL, 0x49e959fdUL, 0xf1553e98UL,
0x6c820621UL, 0xd43e6144UL, 0xc68bceaaUL, 0x7e37a9cfUL, 0xd67f4138UL,
0x6ec3265dUL, 0x7c7689b3UL, 0xc4caeed6UL, 0x591dd66fUL, 0xe1a1b10aUL,
0xf3141ee4UL, 0x4ba87981UL, 0x13cb69d7UL, 0xab770eb2UL, 0xb9c2a15cUL,
0x017ec639UL, 0x9ca9fe80UL, 0x241599e5UL, 0x36a0360bUL, 0x8e1c516eUL,
0x866616a7UL, 0x3eda71c2UL, 0x2c6fde2cUL, 0x94d3b949UL, 0x090481f0UL,
0xb1b8e695UL, 0xa30d497bUL, 0x1bb12e1eUL, 0x43d23e48UL, 0xfb6e592dUL,
0xe9dbf6c3UL, 0x516791a6UL, 0xccb0a91fUL, 0x740cce7aUL, 0x66b96194UL,
0xde0506f1UL
},
{
0x00000000UL, 0x96300777UL, 0x2c610eeeUL, 0xba510999UL, 0x19c46d07UL,
0x8ff46a70UL, 0x35a563e9UL, 0xa395649eUL, 0x3288db0eUL, 0xa4b8dc79UL,
0x1ee9d5e0UL, 0x88d9d297UL, 0x2b4cb609UL, 0xbd7cb17eUL, 0x072db8e7UL,
0x911dbf90UL, 0x6410b71dUL, 0xf220b06aUL, 0x4871b9f3UL, 0xde41be84UL,
0x7dd4da1aUL, 0xebe4dd6dUL, 0x51b5d4f4UL, 0xc785d383UL, 0x56986c13UL,
0xc0a86b64UL, 0x7af962fdUL, 0xecc9658aUL, 0x4f5c0114UL, 0xd96c0663UL,
0x633d0ffaUL, 0xf50d088dUL, 0xc8206e3bUL, 0x5e10694cUL, 0xe44160d5UL,
0x727167a2UL, 0xd1e4033cUL, 0x47d4044bUL, 0xfd850dd2UL, 0x6bb50aa5UL,
0xfaa8b535UL, 0x6c98b242UL, 0xd6c9bbdbUL, 0x40f9bcacUL, 0xe36cd832UL,
0x755cdf45UL, 0xcf0dd6dcUL, 0x593dd1abUL, 0xac30d926UL, 0x3a00de51UL,
0x8051d7c8UL, 0x1661d0bfUL, 0xb5f4b421UL, 0x23c4b356UL, 0x9995bacfUL,
0x0fa5bdb8UL, 0x9eb80228UL, 0x0888055fUL, 0xb2d90cc6UL, 0x24e90bb1UL,
0x877c6f2fUL, 0x114c6858UL, 0xab1d61c1UL, 0x3d2d66b6UL, 0x9041dc76UL,
0x0671db01UL, 0xbc20d298UL, 0x2a10d5efUL, 0x8985b171UL, 0x1fb5b606UL,
0xa5e4bf9fUL, 0x33d4b8e8UL, 0xa2c90778UL, 0x34f9000fUL, 0x8ea80996UL,
0x18980ee1UL, 0xbb0d6a7fUL, 0x2d3d6d08UL, 0x976c6491UL, 0x015c63e6UL,
0xf4516b6bUL, 0x62616c1cUL, 0xd8306585UL, 0x4e0062f2UL, 0xed95066cUL,
0x7ba5011bUL, 0xc1f40882UL, 0x57c40ff5UL, 0xc6d9b065UL, 0x50e9b712UL,
0xeab8be8bUL, 0x7c88b9fcUL, 0xdf1ddd62UL, 0x492dda15UL, 0xf37cd38cUL,
0x654cd4fbUL, 0x5861b24dUL, 0xce51b53aUL, 0x7400bca3UL, 0xe230bbd4UL,
0x41a5df4aUL, 0xd795d83dUL, 0x6dc4d1a4UL, 0xfbf4d6d3UL, 0x6ae96943UL,
0xfcd96e34UL, 0x468867adUL, 0xd0b860daUL, 0x732d0444UL, 0xe51d0333UL,
0x5f4c0aaaUL, 0xc97c0dddUL, 0x3c710550UL, 0xaa410227UL, 0x10100bbeUL,
0x86200cc9UL, 0x25b56857UL, 0xb3856f20UL, 0x09d466b9UL, 0x9fe461ceUL,
0x0ef9de5eUL, 0x98c9d929UL, 0x2298d0b0UL, 0xb4a8d7c7UL, 0x173db359UL,
0x810db42eUL, 0x3b5cbdb7UL, 0xad6cbac0UL, 0x2083b8edUL, 0xb6b3bf9aUL,
0x0ce2b603UL, 0x9ad2b174UL, 0x3947d5eaUL, 0xaf77d29dUL, 0x1526db04UL,
0x8316dc73UL, 0x120b63e3UL, 0x843b6494UL, 0x3e6a6d0dUL, 0xa85a6a7aUL,
0x0bcf0ee4UL, 0x9dff0993UL, 0x27ae000aUL, 0xb19e077dUL, 0x44930ff0UL,
0xd2a30887UL, 0x68f2011eUL, 0xfec20669UL, 0x5d5762f7UL, 0xcb676580UL,
0x71366c19UL, 0xe7066b6eUL, 0x761bd4feUL, 0xe02bd389UL, 0x5a7ada10UL,
0xcc4add67UL, 0x6fdfb9f9UL, 0xf9efbe8eUL, 0x43beb717UL, 0xd58eb060UL,
0xe8a3d6d6UL, 0x7e93d1a1UL, 0xc4c2d838UL, 0x52f2df4fUL, 0xf167bbd1UL,
0x6757bca6UL, 0xdd06b53fUL, 0x4b36b248UL, 0xda2b0dd8UL, 0x4c1b0aafUL,
0xf64a0336UL, 0x607a0441UL, 0xc3ef60dfUL, 0x55df67a8UL, 0xef8e6e31UL,
0x79be6946UL, 0x8cb361cbUL, 0x1a8366bcUL, 0xa0d26f25UL, 0x36e26852UL,
0x95770cccUL, 0x03470bbbUL, 0xb9160222UL, 0x2f260555UL, 0xbe3bbac5UL,
0x280bbdb2UL, 0x925ab42bUL, 0x046ab35cUL, 0xa7ffd7c2UL, 0x31cfd0b5UL,
0x8b9ed92cUL, 0x1daede5bUL, 0xb0c2649bUL, 0x26f263ecUL, 0x9ca36a75UL,
0x0a936d02UL, 0xa906099cUL, 0x3f360eebUL, 0x85670772UL, 0x13570005UL,
0x824abf95UL, 0x147ab8e2UL, 0xae2bb17bUL, 0x381bb60cUL, 0x9b8ed292UL,
0x0dbed5e5UL, 0xb7efdc7cUL, 0x21dfdb0bUL, 0xd4d2d386UL, 0x42e2d4f1UL,
0xf8b3dd68UL, 0x6e83da1fUL, 0xcd16be81UL, 0x5b26b9f6UL, 0xe177b06fUL,
0x7747b718UL, 0xe65a0888UL, 0x706a0fffUL, 0xca3b0666UL, 0x5c0b0111UL,
0xff9e658fUL, 0x69ae62f8UL, 0xd3ff6b61UL, 0x45cf6c16UL, 0x78e20aa0UL,
0xeed20dd7UL, 0x5483044eUL, 0xc2b30339UL, 0x612667a7UL, 0xf71660d0UL,
0x4d476949UL, 0xdb776e3eUL, 0x4a6ad1aeUL, 0xdc5ad6d9UL, 0x660bdf40UL,
0xf03bd837UL, 0x53aebca9UL, 0xc59ebbdeUL, 0x7fcfb247UL, 0xe9ffb530UL,
0x1cf2bdbdUL, 0x8ac2bacaUL, 0x3093b353UL, 0xa6a3b424UL, 0x0536d0baUL,
0x9306d7cdUL, 0x2957de54UL, 0xbf67d923UL, 0x2e7a66b3UL, 0xb84a61c4UL,
0x021b685dUL, 0x942b6f2aUL, 0x37be0bb4UL, 0xa18e0cc3UL, 0x1bdf055aUL,
0x8def022dUL
},
{
0x00000000UL, 0x41311b19UL, 0x82623632UL, 0xc3532d2bUL, 0x04c56c64UL,
0x45f4777dUL, 0x86a75a56UL, 0xc796414fUL, 0x088ad9c8UL, 0x49bbc2d1UL,
0x8ae8effaUL, 0xcbd9f4e3UL, 0x0c4fb5acUL, 0x4d7eaeb5UL, 0x8e2d839eUL,
0xcf1c9887UL, 0x5112c24aUL, 0x1023d953UL, 0xd370f478UL, 0x9241ef61UL,
0x55d7ae2eUL, 0x14e6b537UL, 0xd7b5981cUL, 0x96848305UL, 0x59981b82UL,
0x18a9009bUL, 0xdbfa2db0UL, 0x9acb36a9UL, 0x5d5d77e6UL, 0x1c6c6cffUL,
0xdf3f41d4UL, 0x9e0e5acdUL, 0xa2248495UL, 0xe3159f8cUL, 0x2046b2a7UL,
0x6177a9beUL, 0xa6e1e8f1UL, 0xe7d0f3e8UL, 0x2483dec3UL, 0x65b2c5daUL,
0xaaae5d5dUL, 0xeb9f4644UL, 0x28cc6b6fUL, 0x69fd7076UL, 0xae6b3139UL,
0xef5a2a20UL, 0x2c09070bUL, 0x6d381c12UL, 0xf33646dfUL, 0xb2075dc6UL,
0x715470edUL, 0x30656bf4UL, 0xf7f32abbUL, 0xb6c231a2UL, 0x75911c89UL,
0x34a00790UL, 0xfbbc9f17UL, 0xba8d840eUL, 0x79dea925UL, 0x38efb23cUL,
0xff79f373UL, 0xbe48e86aUL, 0x7d1bc541UL, 0x3c2ade58UL, 0x054f79f0UL,
0x447e62e9UL, 0x872d4fc2UL, 0xc61c54dbUL, 0x018a1594UL, 0x40bb0e8dUL,
0x83e823a6UL, 0xc2d938bfUL, 0x0dc5a038UL, 0x4cf4bb21UL, 0x8fa7960aUL,
0xce968d13UL, 0x0900cc5cUL, 0x4831d745UL, 0x8b62fa6eUL, 0xca53e177UL,
0x545dbbbaUL, 0x156ca0a3UL, 0xd63f8d88UL, 0x970e9691UL, 0x5098d7deUL,
0x11a9ccc7UL, 0xd2fae1ecUL, 0x93cbfaf5UL, 0x5cd76272UL, 0x1de6796bUL,
0xdeb55440UL, 0x9f844f59UL, 0x58120e16UL, 0x1923150fUL, 0xda703824UL,
0x9b41233dUL, 0xa76bfd65UL, 0xe65ae67cUL, 0x2509cb57UL, 0x6438d04eUL,
0xa3ae9101UL, 0xe29f8a18UL, 0x21cca733UL, 0x60fdbc2aUL, 0xafe124adUL,
0xeed03fb4UL, 0x2d83129fUL, 0x6cb20986UL, 0xab2448c9UL, 0xea1553d0UL,
0x29467efbUL, 0x687765e2UL, 0xf6793f2fUL, 0xb7482436UL, 0x741b091dUL,
0x352a1204UL, 0xf2bc534bUL, 0xb38d4852UL, 0x70de6579UL, 0x31ef7e60UL,
0xfef3e6e7UL, 0xbfc2fdfeUL, 0x7c91d0d5UL, 0x3da0cbccUL, 0xfa368a83UL,
0xbb07919aUL, 0x7854bcb1UL, 0x3965a7a8UL, 0x4b98833bUL, 0x0aa99822UL,
0xc9fab509UL, 0x88cbae10UL, 0x4f5def5fUL, 0x0e6cf446UL, 0xcd3fd96dUL,
0x8c0ec274UL, 0x43125af3UL, 0x022341eaUL, 0xc1706cc1UL, 0x804177d8UL,
0x47d73697UL, 0x06e62d8eUL, 0xc5b500a5UL, 0x84841bbcUL, 0x1a8a4171UL,
0x5bbb5a68UL, 0x98e87743UL, 0xd9d96c5aUL, 0x1e4f2d15UL, 0x5f7e360cUL,
0x9c2d1b27UL, 0xdd1c003eUL, 0x120098b9UL, 0x533183a0UL, 0x9062ae8bUL,
0xd153b592UL, 0x16c5f4ddUL, 0x57f4efc4UL, 0x94a7c2efUL, 0xd596d9f6UL,
0xe9bc07aeUL, 0xa88d1cb7UL, 0x6bde319cUL, 0x2aef2a85UL, 0xed796bcaUL,
0xac4870d3UL, 0x6f1b5df8UL, 0x2e2a46e1UL, 0xe136de66UL, 0xa007c57fUL,
0x6354e854UL, 0x2265f34dUL, 0xe5f3b202UL, 0xa4c2a91bUL, 0x67918430UL,
0x26a09f29UL, 0xb8aec5e4UL, 0xf99fdefdUL, 0x3accf3d6UL, 0x7bfde8cfUL,
0xbc6ba980UL, 0xfd5ab299UL, 0x3e099fb2UL, 0x7f3884abUL, 0xb0241c2cUL,
0xf1150735UL, 0x32462a1eUL, 0x73773107UL, 0xb4e17048UL, 0xf5d06b51UL,
0x3683467aUL, 0x77b25d63UL, 0x4ed7facbUL, 0x0fe6e1d2UL, 0xccb5ccf9UL,
0x8d84d7e0UL, 0x4a1296afUL, 0x0b238db6UL, 0xc870a09dUL, 0x8941bb84UL,
0x465d2303UL, 0x076c381aUL, 0xc43f1531UL, 0x850e0e28UL, 0x42984f67UL,
0x03a9547eUL, 0xc0fa7955UL, 0x81cb624cUL, 0x1fc53881UL, 0x5ef42398UL,
0x9da70eb3UL, 0xdc9615aaUL, 0x1b0054e5UL, 0x5a314ffcUL, 0x996262d7UL,
0xd85379ceUL, 0x174fe149UL, 0x567efa50UL, 0x952dd77bUL, 0xd41ccc62UL,
0x138a8d2dUL, 0x52bb9634UL, 0x91e8bb1fUL, 0xd0d9a006UL, 0xecf37e5eUL,
0xadc26547UL, 0x6e91486cUL, 0x2fa05375UL, 0xe836123aUL, 0xa9070923UL,
0x6a542408UL, 0x2b653f11UL, 0xe479a796UL, 0xa548bc8fUL, 0x661b91a4UL,
0x272a8abdUL, 0xe0bccbf2UL, 0xa18dd0ebUL, 0x62defdc0UL, 0x23efe6d9UL,
0xbde1bc14UL, 0xfcd0a70dUL, 0x3f838a26UL, 0x7eb2913fUL, 0xb924d070UL,
0xf815cb69UL, 0x3b46e642UL, 0x7a77fd5bUL, 0xb56b65dcUL, 0xf45a7ec5UL,
0x370953eeUL, 0x763848f7UL, 0xb1ae09b8UL, 0xf09f12a1UL, 0x33cc3f8aUL,
0x72fd2493UL
},
{
0x00000000UL, 0x376ac201UL, 0x6ed48403UL, 0x59be4602UL, 0xdca80907UL,
0xebc2cb06UL, 0xb27c8d04UL, 0x85164f05UL, 0xb851130eUL, 0x8f3bd10fUL,
0xd685970dUL, 0xe1ef550cUL, 0x64f91a09UL, 0x5393d808UL, 0x0a2d9e0aUL,
0x3d475c0bUL, 0x70a3261cUL, 0x47c9e41dUL, 0x1e77a21fUL, 0x291d601eUL,
0xac0b2f1bUL, 0x9b61ed1aUL, 0xc2dfab18UL, 0xf5b56919UL, 0xc8f23512UL,
0xff98f713UL, 0xa626b111UL, 0x914c7310UL, 0x145a3c15UL, 0x2330fe14UL,
0x7a8eb816UL, 0x4de47a17UL, 0xe0464d38UL, 0xd72c8f39UL, 0x8e92c93bUL,
0xb9f80b3aUL, 0x3cee443fUL, 0x0b84863eUL, 0x523ac03cUL, 0x6550023dUL,
0x58175e36UL, 0x6f7d9c37UL, 0x36c3da35UL, 0x01a91834UL, 0x84bf5731UL,
0xb3d59530UL, 0xea6bd332UL, 0xdd011133UL, 0x90e56b24UL, 0xa78fa925UL,
0xfe31ef27UL, 0xc95b2d26UL, 0x4c4d6223UL, 0x7b27a022UL, 0x2299e620UL,
0x15f32421UL, 0x28b4782aUL, 0x1fdeba2bUL, 0x4660fc29UL, 0x710a3e28UL,
0xf41c712dUL, 0xc376b32cUL, 0x9ac8f52eUL, 0xada2372fUL, 0xc08d9a70UL,
0xf7e75871UL, 0xae591e73UL, 0x9933dc72UL, 0x1c259377UL, 0x2b4f5176UL,
0x72f11774UL, 0x459bd575UL, 0x78dc897eUL, 0x4fb64b7fUL, 0x16080d7dUL,
0x2162cf7cUL, 0xa4748079UL, 0x931e4278UL, 0xcaa0047aUL, 0xfdcac67bUL,
0xb02ebc6cUL, 0x87447e6dUL, 0xdefa386fUL, 0xe990fa6eUL, 0x6c86b56bUL,
0x5bec776aUL, 0x02523168UL, 0x3538f369UL, 0x087faf62UL, 0x3f156d63UL,
0x66ab2b61UL, 0x51c1e960UL, 0xd4d7a665UL, 0xe3bd6464UL, 0xba032266UL,
0x8d69e067UL, 0x20cbd748UL, 0x17a11549UL, 0x4e1f534bUL, 0x7975914aUL,
0xfc63de4fUL, 0xcb091c4eUL, 0x92b75a4cUL, 0xa5dd984dUL, 0x989ac446UL,
0xaff00647UL, 0xf64e4045UL, 0xc1248244UL, 0x4432cd41UL, 0x73580f40UL,
0x2ae64942UL, 0x1d8c8b43UL, 0x5068f154UL, 0x67023355UL, 0x3ebc7557UL,
0x09d6b756UL, 0x8cc0f853UL, 0xbbaa3a52UL, 0xe2147c50UL, 0xd57ebe51UL,
0xe839e25aUL, 0xdf53205bUL, 0x86ed6659UL, 0xb187a458UL, 0x3491eb5dUL,
0x03fb295cUL, 0x5a456f5eUL, 0x6d2fad5fUL, 0x801b35e1UL, 0xb771f7e0UL,
0xeecfb1e2UL, 0xd9a573e3UL, 0x5cb33ce6UL, 0x6bd9fee7UL, 0x3267b8e5UL,
0x050d7ae4UL, 0x384a26efUL, 0x0f20e4eeUL, 0x569ea2ecUL, 0x61f460edUL,
0xe4e22fe8UL, 0xd388ede9UL, 0x8a36abebUL, 0xbd5c69eaUL, 0xf0b813fdUL,
0xc7d2d1fcUL, 0x9e6c97feUL, 0xa90655ffUL, 0x2c101afaUL, 0x1b7ad8fbUL,
0x42c49ef9UL, 0x75ae5cf8UL, 0x48e900f3UL, 0x7f83c2f2UL, 0x263d84f0UL,
0x115746f1UL, 0x944109f4UL, 0xa32bcbf5UL, 0xfa958df7UL, 0xcdff4ff6UL,
0x605d78d9UL, 0x5737bad8UL, 0x0e89fcdaUL, 0x39e33edbUL, 0xbcf571deUL,
0x8b9fb3dfUL, 0xd221f5ddUL, 0xe54b37dcUL, 0xd80c6bd7UL, 0xef66a9d6UL,
0xb6d8efd4UL, 0x81b22dd5UL, 0x04a462d0UL, 0x33cea0d1UL, 0x6a70e6d3UL,
0x5d1a24d2UL, 0x10fe5ec5UL, 0x27949cc4UL, 0x7e2adac6UL, 0x494018c7UL,
0xcc5657c2UL, 0xfb3c95c3UL, 0xa282d3c1UL, 0x95e811c0UL, 0xa8af4dcbUL,
0x9fc58fcaUL, 0xc67bc9c8UL, 0xf1110bc9UL, 0x740744ccUL, 0x436d86cdUL,
0x1ad3c0cfUL, 0x2db902ceUL, 0x4096af91UL, 0x77fc6d90UL, 0x2e422b92UL,
0x1928e993UL, 0x9c3ea696UL, 0xab546497UL, 0xf2ea2295UL, 0xc580e094UL,
0xf8c7bc9fUL, 0xcfad7e9eUL, 0x9613389cUL, 0xa179fa9dUL, 0x246fb598UL,
0x13057799UL, 0x4abb319bUL, 0x7dd1f39aUL, 0x3035898dUL, 0x075f4b8cUL,
0x5ee10d8eUL, 0x698bcf8fUL, 0xec9d808aUL, 0xdbf7428bUL, 0x82490489UL,
0xb523c688UL, 0x88649a83UL, 0xbf0e5882UL, 0xe6b01e80UL, 0xd1dadc81UL,
0x54cc9384UL, 0x63a65185UL, 0x3a181787UL, 0x0d72d586UL, 0xa0d0e2a9UL,
0x97ba20a8UL, 0xce0466aaUL, 0xf96ea4abUL, 0x7c78ebaeUL, 0x4b1229afUL,
0x12ac6fadUL, 0x25c6adacUL, 0x1881f1a7UL, 0x2feb33a6UL, 0x765575a4UL,
0x413fb7a5UL, 0xc429f8a0UL, 0xf3433aa1UL, 0xaafd7ca3UL, 0x9d97bea2UL,
0xd073c4b5UL, 0xe71906b4UL, 0xbea740b6UL, 0x89cd82b7UL, 0x0cdbcdb2UL,
0x3bb10fb3UL, 0x620f49b1UL, 0x55658bb0UL, 0x6822d7bbUL, 0x5f4815baUL,
0x06f653b8UL, 0x319c91b9UL, 0xb48adebcUL, 0x83e01cbdUL, 0xda5e5abfUL,
0xed3498beUL
},
{
0x00000000UL, 0x6567bcb8UL, 0x8bc809aaUL, 0xeeafb512UL, 0x5797628fUL,
0x32f0de37UL, 0xdc5f6b25UL, 0xb938d79dUL, 0xef28b4c5UL, 0x8a4f087dUL,
0x64e0bd6fUL, 0x018701d7UL, 0xb8bfd64aUL, 0xddd86af2UL, 0x3377dfe0UL,
0x56106358UL, 0x9f571950UL, 0xfa30a5e8UL, 0x149f10faUL, 0x71f8ac42UL,
0xc8c07bdfUL, 0xada7c767UL, 0x43087275UL, 0x266fcecdUL, 0x707fad95UL,
0x1518112dUL, 0xfbb7a43fUL, 0x9ed01887UL, 0x27e8cf1aUL, 0x428f73a2UL,
0xac20c6b0UL, 0xc9477a08UL, 0x3eaf32a0UL, 0x5bc88e18UL, 0xb5673b0aUL,
0xd00087b2UL, 0x6938502fUL, 0x0c5fec97UL, 0xe2f05985UL, 0x8797e53dUL,
0xd1878665UL, 0xb4e03addUL, 0x5a4f8fcfUL, 0x3f283377UL, 0x8610e4eaUL,
0xe3775852UL, 0x0dd8ed40UL, 0x68bf51f8UL, 0xa1f82bf0UL, 0xc49f9748UL,
0x2a30225aUL, 0x4f579ee2UL, 0xf66f497fUL, 0x9308f5c7UL, 0x7da740d5UL,
0x18c0fc6dUL, 0x4ed09f35UL, 0x2bb7238dUL, 0xc518969fUL, 0xa07f2a27UL,
0x1947fdbaUL, 0x7c204102UL, 0x928ff410UL, 0xf7e848a8UL, 0x3d58149bUL,
0x583fa823UL, 0xb6901d31UL, 0xd3f7a189UL, 0x6acf7614UL, 0x0fa8caacUL,
0xe1077fbeUL, 0x8460c306UL, 0xd270a05eUL, 0xb7171ce6UL, 0x59b8a9f4UL,
0x3cdf154cUL, 0x85e7c2d1UL, 0xe0807e69UL, 0x0e2fcb7bUL, 0x6b4877c3UL,
0xa20f0dcbUL, 0xc768b173UL, 0x29c70461UL, 0x4ca0b8d9UL, 0xf5986f44UL,
0x90ffd3fcUL, 0x7e5066eeUL, 0x1b37da56UL, 0x4d27b90eUL, 0x284005b6UL,
0xc6efb0a4UL, 0xa3880c1cUL, 0x1ab0db81UL, 0x7fd76739UL, 0x9178d22bUL,
0xf41f6e93UL, 0x03f7263bUL, 0x66909a83UL, 0x883f2f91UL, 0xed589329UL,
0x546044b4UL, 0x3107f80cUL, 0xdfa84d1eUL, 0xbacff1a6UL, 0xecdf92feUL,
0x89b82e46UL, 0x67179b54UL, 0x027027ecUL, 0xbb48f071UL, 0xde2f4cc9UL,
0x3080f9dbUL, 0x55e74563UL, 0x9ca03f6bUL, 0xf9c783d3UL, 0x176836c1UL,
0x720f8a79UL, 0xcb375de4UL, 0xae50e15cUL, 0x40ff544eUL, 0x2598e8f6UL,
0x73888baeUL, 0x16ef3716UL, 0xf8408204UL, 0x9d273ebcUL, 0x241fe921UL,
0x41785599UL, 0xafd7e08bUL, 0xcab05c33UL, 0x3bb659edUL, 0x5ed1e555UL,
0xb07e5047UL, 0xd519ecffUL, 0x6c213b62UL, 0x094687daUL, 0xe7e932c8UL,
0x828e8e70UL, 0xd49eed28UL, 0xb1f95190UL, 0x5f56e482UL, 0x3a31583aUL,
0x83098fa7UL, 0xe66e331fUL, 0x08c1860dUL, 0x6da63ab5UL, 0xa4e140bdUL,
0xc186fc05UL, 0x2f294917UL, 0x4a4ef5afUL, 0xf3762232UL, 0x96119e8aUL,
0x78be2b98UL, 0x1dd99720UL, 0x4bc9f478UL, 0x2eae48c0UL, 0xc001fdd2UL,
0xa566416aUL, 0x1c5e96f7UL, 0x79392a4fUL, 0x97969f5dUL, 0xf2f123e5UL,
0x05196b4dUL, 0x607ed7f5UL, 0x8ed162e7UL, 0xebb6de5fUL, 0x528e09c2UL,
0x37e9b57aUL, 0xd9460068UL, 0xbc21bcd0UL, 0xea31df88UL, 0x8f566330UL,
0x61f9d622UL, 0x049e6a9aUL, 0xbda6bd07UL, 0xd8c101bfUL, 0x366eb4adUL,
0x53090815UL, 0x9a4e721dUL, 0xff29cea5UL, 0x11867bb7UL, 0x74e1c70fUL,
0xcdd91092UL, 0xa8beac2aUL, 0x46111938UL, 0x2376a580UL, 0x7566c6d8UL,
0x10017a60UL, 0xfeaecf72UL, 0x9bc973caUL, 0x22f1a457UL, 0x479618efUL,
0xa939adfdUL, 0xcc5e1145UL, 0x06ee4d76UL, 0x6389f1ceUL, 0x8d2644dcUL,
0xe841f864UL, 0x51792ff9UL, 0x341e9341UL, 0xdab12653UL, 0xbfd69aebUL,
0xe9c6f9b3UL, 0x8ca1450bUL, 0x620ef019UL, 0x07694ca1UL, 0xbe519b3cUL,
0xdb362784UL, 0x35999296UL, 0x50fe2e2eUL, 0x99b95426UL, 0xfcdee89eUL,
0x12715d8cUL, 0x7716e134UL, 0xce2e36a9UL, 0xab498a11UL, 0x45e63f03UL,
0x208183bbUL, 0x7691e0e3UL, 0x13f65c5bUL, 0xfd59e949UL, 0x983e55f1UL,
0x2106826cUL, 0x44613ed4UL, 0xaace8bc6UL, 0xcfa9377eUL, 0x38417fd6UL,
0x5d26c36eUL, 0xb389767cUL, 0xd6eecac4UL, 0x6fd61d59UL, 0x0ab1a1e1UL,
0xe41e14f3UL, 0x8179a84bUL, 0xd769cb13UL, 0xb20e77abUL, 0x5ca1c2b9UL,
0x39c67e01UL, 0x80fea99cUL, 0xe5991524UL, 0x0b36a036UL, 0x6e511c8eUL,
0xa7166686UL, 0xc271da3eUL, 0x2cde6f2cUL, 0x49b9d394UL, 0xf0810409UL,
0x95e6b8b1UL, 0x7b490da3UL, 0x1e2eb11bUL, 0x483ed243UL, 0x2d596efbUL,
0xc3f6dbe9UL, 0xa6916751UL, 0x1fa9b0ccUL, 0x7ace0c74UL, 0x9461b966UL,
0xf10605deUL
#endif
}
};

1678
src/zlib/deflate.c Normal file

File diff suppressed because it is too large Load Diff

331
src/zlib/deflate.h Normal file
View File

@ -0,0 +1,331 @@
/* deflate.h -- internal compression state
* Copyright (C) 1995-2004 Jean-loup Gailly
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/* WARNING: this file should *not* be used by applications. It is
part of the implementation of the compression library and is
subject to change. Applications should only use zlib.h.
*/
/* @(#) $Id$ */
#ifndef DEFLATE_H
#define DEFLATE_H
#include "zutil.h"
/* define NO_GZIP when compiling if you want to disable gzip header and
trailer creation by deflate(). NO_GZIP would be used to avoid linking in
the crc code when it is not needed. For shared libraries, gzip encoding
should be left enabled. */
#ifndef NO_GZIP
# define GZIP
#endif
/* ===========================================================================
* Internal compression state.
*/
#define LENGTH_CODES 29
/* number of length codes, not counting the special END_BLOCK code */
#define LITERALS 256
/* number of literal bytes 0..255 */
#define L_CODES (LITERALS+1+LENGTH_CODES)
/* number of Literal or Length codes, including the END_BLOCK code */
#define D_CODES 30
/* number of distance codes */
#define BL_CODES 19
/* number of codes used to transfer the bit lengths */
#define HEAP_SIZE (2*L_CODES+1)
/* maximum heap size */
#define MAX_BITS 15
/* All codes must not exceed MAX_BITS bits */
#define INIT_STATE 42
#define EXTRA_STATE 69
#define NAME_STATE 73
#define COMMENT_STATE 91
#define HCRC_STATE 103
#define BUSY_STATE 113
#define FINISH_STATE 666
/* Stream status */
/* Data structure describing a single value and its code string. */
typedef struct ct_data_s {
union {
ush freq; /* frequency count */
ush code; /* bit string */
} fc;
union {
ush dad; /* father node in Huffman tree */
ush len; /* length of bit string */
} dl;
} FAR ct_data;
#define Freq fc.freq
#define Code fc.code
#define Dad dl.dad
#define Len dl.len
typedef struct static_tree_desc_s static_tree_desc;
typedef struct tree_desc_s {
ct_data *dyn_tree; /* the dynamic tree */
int max_code; /* largest code with non zero frequency */
static_tree_desc *stat_desc; /* the corresponding static tree */
} FAR tree_desc;
typedef ush Pos;
typedef Pos FAR Posf;
typedef unsigned IPos;
/* A Pos is an index in the character window. We use short instead of int to
* save space in the various tables. IPos is used only for parameter passing.
*/
typedef struct internal_state {
z_streamp strm; /* pointer back to this zlib stream */
int status; /* as the name implies */
Bytef *pending_buf; /* output still pending */
ulg pending_buf_size; /* size of pending_buf */
Bytef *pending_out; /* next pending byte to output to the stream */
uInt pending; /* nb of bytes in the pending buffer */
int wrap; /* bit 0 true for zlib, bit 1 true for gzip */
gz_headerp gzhead; /* gzip header information to write */
uInt gzindex; /* where in extra, name, or comment */
Byte method; /* STORED (for zip only) or DEFLATED */
int last_flush; /* value of flush param for previous deflate call */
/* used by deflate.c: */
uInt w_size; /* LZ77 window size (32K by default) */
uInt w_bits; /* log2(w_size) (8..16) */
uInt w_mask; /* w_size - 1 */
Bytef *window;
/* Sliding window. Input bytes are read into the second half of the window,
* and move to the first half later to keep a dictionary of at least wSize
* bytes. With this organization, matches are limited to a distance of
* wSize-MAX_MATCH bytes, but this ensures that IO is always
* performed with a length multiple of the block size. Also, it limits
* the window size to 64K, which is quite useful on MSDOS.
* To do: use the user input buffer as sliding window.
*/
ulg window_size;
/* Actual size of window: 2*wSize, except when the user input buffer
* is directly used as sliding window.
*/
Posf *prev;
/* Link to older string with same hash index. To limit the size of this
* array to 64K, this link is maintained only for the last 32K strings.
* An index in this array is thus a window index modulo 32K.
*/
Posf *head; /* Heads of the hash chains or NIL. */
uInt ins_h; /* hash index of string to be inserted */
uInt hash_size; /* number of elements in hash table */
uInt hash_bits; /* log2(hash_size) */
uInt hash_mask; /* hash_size-1 */
uInt hash_shift;
/* Number of bits by which ins_h must be shifted at each input
* step. It must be such that after MIN_MATCH steps, the oldest
* byte no longer takes part in the hash key, that is:
* hash_shift * MIN_MATCH >= hash_bits
*/
long block_start;
/* Window position at the beginning of the current output block. Gets
* negative when the window is moved backwards.
*/
uInt match_length; /* length of best match */
IPos prev_match; /* previous match */
int match_available; /* set if previous match exists */
uInt strstart; /* start of string to insert */
uInt match_start; /* start of matching string */
uInt lookahead; /* number of valid bytes ahead in window */
uInt prev_length;
/* Length of the best match at previous step. Matches not greater than this
* are discarded. This is used in the lazy match evaluation.
*/
uInt max_chain_length;
/* To speed up deflation, hash chains are never searched beyond this
* length. A higher limit improves compression ratio but degrades the
* speed.
*/
uInt max_lazy_match;
/* Attempt to find a better match only when the current match is strictly
* smaller than this value. This mechanism is used only for compression
* levels >= 4.
*/
# define max_insert_length max_lazy_match
/* Insert new strings in the hash table only if the match length is not
* greater than this length. This saves time but degrades compression.
* max_insert_length is used only for compression levels <= 3.
*/
int level; /* compression level (1..9) */
int strategy; /* favor or force Huffman coding*/
uInt good_match;
/* Use a faster search when the previous match is longer than this */
int nice_match; /* Stop searching when current match exceeds this */
/* used by trees.c: */
/* Didn't use ct_data typedef below to supress compiler warning */
struct ct_data_s dyn_ltree[HEAP_SIZE]; /* literal and length tree */
struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
struct ct_data_s bl_tree[2*BL_CODES+1]; /* Huffman tree for bit lengths */
struct tree_desc_s l_desc; /* desc. for literal tree */
struct tree_desc_s d_desc; /* desc. for distance tree */
struct tree_desc_s bl_desc; /* desc. for bit length tree */
ush bl_count[MAX_BITS+1];
/* number of codes at each bit length for an optimal tree */
int heap[2*L_CODES+1]; /* heap used to build the Huffman trees */
int heap_len; /* number of elements in the heap */
int heap_max; /* element of largest frequency */
/* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
* The same heap array is used to build all trees.
*/
uch depth[2*L_CODES+1];
/* Depth of each subtree used as tie breaker for trees of equal frequency
*/
uchf *l_buf; /* buffer for literals or lengths */
uInt lit_bufsize;
/* Size of match buffer for literals/lengths. There are 4 reasons for
* limiting lit_bufsize to 64K:
* - frequencies can be kept in 16 bit counters
* - if compression is not successful for the first block, all input
* data is still in the window so we can still emit a stored block even
* when input comes from standard input. (This can also be done for
* all blocks if lit_bufsize is not greater than 32K.)
* - if compression is not successful for a file smaller than 64K, we can
* even emit a stored file instead of a stored block (saving 5 bytes).
* This is applicable only for zip (not gzip or zlib).
* - creating new Huffman trees less frequently may not provide fast
* adaptation to changes in the input data statistics. (Take for
* example a binary file with poorly compressible code followed by
* a highly compressible string table.) Smaller buffer sizes give
* fast adaptation but have of course the overhead of transmitting
* trees more frequently.
* - I can't count above 4
*/
uInt last_lit; /* running index in l_buf */
ushf *d_buf;
/* Buffer for distances. To simplify the code, d_buf and l_buf have
* the same number of elements. To use different lengths, an extra flag
* array would be necessary.
*/
ulg opt_len; /* bit length of current block with optimal trees */
ulg static_len; /* bit length of current block with static trees */
uInt matches; /* number of string matches in current block */
int last_eob_len; /* bit length of EOB code for last block */
#ifdef DEBUG
ulg compressed_len; /* total bit length of compressed file mod 2^32 */
ulg bits_sent; /* bit length of compressed data sent mod 2^32 */
#endif
ush bi_buf;
/* Output buffer. bits are inserted starting at the bottom (least
* significant bits).
*/
int bi_valid;
/* Number of valid bits in bi_buf. All bits above the last valid bit
* are always zero.
*/
} FAR deflate_state;
/* Output a byte on the stream.
* IN assertion: there is enough room in pending_buf.
*/
#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);}
#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
/* Minimum amount of lookahead, except at the end of the input file.
* See deflate.c for comments about the MIN_MATCH+1.
*/
#define MAX_DIST(s) ((s)->w_size-MIN_LOOKAHEAD)
/* In order to simplify the code, particularly on 16 bit machines, match
* distances are limited to MAX_DIST instead of WSIZE.
*/
/* in trees.c */
void _tr_init OF((deflate_state *s));
int _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc));
void _tr_flush_block OF((deflate_state *s, charf *buf, ulg stored_len,
int eof));
void _tr_align OF((deflate_state *s));
void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
int eof));
#define d_code(dist) \
((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)])
/* Mapping from a distance to a distance code. dist is the distance - 1 and
* must not have side effects. _dist_code[256] and _dist_code[257] are never
* used.
*/
#ifndef DEBUG
/* Inline versions of _tr_tally for speed: */
#if defined(GEN_TREES_H) || !defined(STDC)
extern uch _length_code[];
extern uch _dist_code[];
#else
extern const uch _length_code[];
extern const uch _dist_code[];
#endif
# define _tr_tally_lit(s, c, flush) \
{ uch cc = (c); \
s->d_buf[s->last_lit] = 0; \
s->l_buf[s->last_lit++] = cc; \
s->dyn_ltree[cc].Freq++; \
flush = (s->last_lit == s->lit_bufsize-1); \
}
# define _tr_tally_dist(s, distance, length, flush) \
{ uch len = (length); \
ush dist = (distance); \
s->d_buf[s->last_lit] = dist; \
s->l_buf[s->last_lit++] = len; \
dist--; \
s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \
s->dyn_dtree[d_code(dist)].Freq++; \
flush = (s->last_lit == s->lit_bufsize-1); \
}
#else
# define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c)
# define _tr_tally_dist(s, distance, length, flush) \
flush = _tr_tally(s, distance, length)
#endif
#endif /* DEFLATE_H */

542
src/zlib/example.c Normal file
View File

@ -0,0 +1,542 @@
/* example.c -- usage example of the zlib compression library
* Copyright (C) 1995-2004 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/* @(#) $Id$ */
#include <stdio.h>
#include "zlib.h"
#ifdef STDC
# include <string.h>
# include <stdlib.h>
#endif
#if defined(VMS) || defined(RISCOS)
# define TESTFILE "foo-gz"
#else
# define TESTFILE "foo.gz"
#endif
#define CHECK_ERR(err, msg) { \
if (err != Z_OK) { \
fprintf(stderr, "%s error: %d\n", msg, err); \
exit(1); \
} \
}
const char hello[] = "hello, hello!";
/* "hello world" would be more standard, but the repeated "hello"
* stresses the compression code better, sorry...
*/
const char dictionary[] = "hello";
uLong dictId; /* Adler32 value of the dictionary */
void test_compress OF((Byte *compr, uLong comprLen,
Byte *uncompr, uLong uncomprLen));
void test_gzio OF((const char *fname,
Byte *uncompr, uLong uncomprLen));
void test_deflate OF((Byte *compr, uLong comprLen));
void test_inflate OF((Byte *compr, uLong comprLen,
Byte *uncompr, uLong uncomprLen));
void test_large_deflate OF((Byte *compr, uLong comprLen,
Byte *uncompr, uLong uncomprLen));
void test_large_inflate OF((Byte *compr, uLong comprLen,
Byte *uncompr, uLong uncomprLen));
void test_flush OF((Byte *compr, uLong *comprLen));
void test_sync OF((Byte *compr, uLong comprLen,
Byte *uncompr, uLong uncomprLen));
void test_dict_deflate OF((Byte *compr, uLong comprLen));
void test_dict_inflate OF((Byte *compr, uLong comprLen,
Byte *uncompr, uLong uncomprLen));
int main OF((int argc, char *argv[]));
/* ===========================================================================
* Test compress() and uncompress()
*/
void test_compress(Byte *compr, uLong comprLen, Byte *uncompr, uLong uncomprLen)
{
int err;
uLong len = (uLong)strlen(hello)+1;
err = compress(compr, &comprLen, (const Bytef*)hello, len);
CHECK_ERR(err, "compress");
strcpy((char*)uncompr, "garbage");
err = uncompress(uncompr, &uncomprLen, compr, comprLen);
CHECK_ERR(err, "uncompress");
if (strcmp((char*)uncompr, hello)) {
fprintf(stderr, "bad uncompress\n");
exit(1);
} else {
printf("uncompress(): %s\n", (char *)uncompr);
}
}
/* ===========================================================================
* Test read/write of .gz files
*/
void test_gzio(const char *fname, Byte *uncompr, uLong uncomprLen)
{
#ifdef NO_GZCOMPRESS
fprintf(stderr, "NO_GZCOMPRESS -- gz* functions cannot compress\n");
#else
int err;
int len = (int)strlen(hello)+1;
gzFile file;
z_off_t pos;
file = gzopen(fname, "wb");
if (file == NULL) {
fprintf(stderr, "gzopen error\n");
exit(1);
}
gzputc(file, 'h');
if (gzputs(file, "ello") != 4) {
fprintf(stderr, "gzputs err: %s\n", gzerror(file, &err));
exit(1);
}
if (gzprintf(file, ", %s!", "hello") != 8) {
fprintf(stderr, "gzprintf err: %s\n", gzerror(file, &err));
exit(1);
}
gzseek(file, 1L, SEEK_CUR); /* add one zero byte */
gzclose(file);
file = gzopen(fname, "rb");
if (file == NULL) {
fprintf(stderr, "gzopen error\n");
exit(1);
}
strcpy((char*)uncompr, "garbage");
if (gzread(file, uncompr, (unsigned)uncomprLen) != len) {
fprintf(stderr, "gzread err: %s\n", gzerror(file, &err));
exit(1);
}
if (strcmp((char*)uncompr, hello)) {
fprintf(stderr, "bad gzread: %s\n", (char*)uncompr);
exit(1);
} else {
printf("gzread(): %s\n", (char*)uncompr);
}
pos = gzseek(file, -8L, SEEK_CUR);
if (pos != 6 || gztell(file) != pos) {
fprintf(stderr, "gzseek error, pos=%ld, gztell=%ld\n",
(long)pos, (long)gztell(file));
exit(1);
}
if (gzgetc(file) != ' ') {
fprintf(stderr, "gzgetc error\n");
exit(1);
}
if (gzungetc(' ', file) != ' ') {
fprintf(stderr, "gzungetc error\n");
exit(1);
}
gzgets(file, (char*)uncompr, (int)uncomprLen);
if (strlen((char*)uncompr) != 7) { /* " hello!" */
fprintf(stderr, "gzgets err after gzseek: %s\n", gzerror(file, &err));
exit(1);
}
if (strcmp((char*)uncompr, hello + 6)) {
fprintf(stderr, "bad gzgets after gzseek\n");
exit(1);
} else {
printf("gzgets() after gzseek: %s\n", (char*)uncompr);
}
gzclose(file);
#endif
}
/* ===========================================================================
* Test deflate() with small buffers
*/
void test_deflate(Byte *compr, uLong comprLen)
{
z_stream c_stream; /* compression stream */
int err;
uLong len = (uLong)strlen(hello)+1;
c_stream.zalloc = (alloc_func)0;
c_stream.zfree = (free_func)0;
c_stream.opaque = (voidpf)0;
err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
CHECK_ERR(err, "deflateInit");
c_stream.next_in = (Bytef*)hello;
c_stream.next_out = compr;
while (c_stream.total_in != len && c_stream.total_out < comprLen) {
c_stream.avail_in = c_stream.avail_out = 1; /* force small buffers */
err = deflate(&c_stream, Z_NO_FLUSH);
CHECK_ERR(err, "deflate");
}
/* Finish the stream, still forcing small buffers: */
for (;;) {
c_stream.avail_out = 1;
err = deflate(&c_stream, Z_FINISH);
if (err == Z_STREAM_END) break;
CHECK_ERR(err, "deflate");
}
err = deflateEnd(&c_stream);
CHECK_ERR(err, "deflateEnd");
}
/* ===========================================================================
* Test inflate() with small buffers
*/
void test_inflate(Byte *compr, uLong comprLen, Byte *uncompr, uLong uncomprLen)
{
int err;
z_stream d_stream; /* decompression stream */
strcpy((char*)uncompr, "garbage");
d_stream.zalloc = (alloc_func)0;
d_stream.zfree = (free_func)0;
d_stream.opaque = (voidpf)0;
d_stream.next_in = compr;
d_stream.avail_in = 0;
d_stream.next_out = uncompr;
err = inflateInit(&d_stream);
CHECK_ERR(err, "inflateInit");
while (d_stream.total_out < uncomprLen && d_stream.total_in < comprLen) {
d_stream.avail_in = d_stream.avail_out = 1; /* force small buffers */
err = inflate(&d_stream, Z_NO_FLUSH);
if (err == Z_STREAM_END) break;
CHECK_ERR(err, "inflate");
}
err = inflateEnd(&d_stream);
CHECK_ERR(err, "inflateEnd");
if (strcmp((char*)uncompr, hello)) {
fprintf(stderr, "bad inflate\n");
exit(1);
} else {
printf("inflate(): %s\n", (char *)uncompr);
}
}
/* ===========================================================================
* Test deflate() with large buffers and dynamic change of compression level
*/
void test_large_deflate(Byte *compr, uLong comprLen, Byte *uncompr, uLong uncomprLen)
{
z_stream c_stream; /* compression stream */
int err;
c_stream.zalloc = (alloc_func)0;
c_stream.zfree = (free_func)0;
c_stream.opaque = (voidpf)0;
err = deflateInit(&c_stream, Z_BEST_SPEED);
CHECK_ERR(err, "deflateInit");
c_stream.next_out = compr;
c_stream.avail_out = (uInt)comprLen;
/* At this point, uncompr is still mostly zeroes, so it should compress
* very well:
*/
c_stream.next_in = uncompr;
c_stream.avail_in = (uInt)uncomprLen;
err = deflate(&c_stream, Z_NO_FLUSH);
CHECK_ERR(err, "deflate");
if (c_stream.avail_in != 0) {
fprintf(stderr, "deflate not greedy\n");
exit(1);
}
/* Feed in already compressed data and switch to no compression: */
deflateParams(&c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY);
c_stream.next_in = compr;
c_stream.avail_in = (uInt)comprLen/2;
err = deflate(&c_stream, Z_NO_FLUSH);
CHECK_ERR(err, "deflate");
/* Switch back to compressing mode: */
deflateParams(&c_stream, Z_BEST_COMPRESSION, Z_FILTERED);
c_stream.next_in = uncompr;
c_stream.avail_in = (uInt)uncomprLen;
err = deflate(&c_stream, Z_NO_FLUSH);
CHECK_ERR(err, "deflate");
err = deflate(&c_stream, Z_FINISH);
if (err != Z_STREAM_END) {
fprintf(stderr, "deflate should report Z_STREAM_END\n");
exit(1);
}
err = deflateEnd(&c_stream);
CHECK_ERR(err, "deflateEnd");
}
/* ===========================================================================
* Test inflate() with large buffers
*/
void test_large_inflate(Byte *compr, uLong comprLen, Byte *uncompr, uLong uncomprLen)
{
int err;
z_stream d_stream; /* decompression stream */
strcpy((char*)uncompr, "garbage");
d_stream.zalloc = (alloc_func)0;
d_stream.zfree = (free_func)0;
d_stream.opaque = (voidpf)0;
d_stream.next_in = compr;
d_stream.avail_in = (uInt)comprLen;
err = inflateInit(&d_stream);
CHECK_ERR(err, "inflateInit");
for (;;) {
d_stream.next_out = uncompr; /* discard the output */
d_stream.avail_out = (uInt)uncomprLen;
err = inflate(&d_stream, Z_NO_FLUSH);
if (err == Z_STREAM_END) break;
CHECK_ERR(err, "large inflate");
}
err = inflateEnd(&d_stream);
CHECK_ERR(err, "inflateEnd");
if (d_stream.total_out != 2*uncomprLen + comprLen/2) {
fprintf(stderr, "bad large inflate: %ld\n", d_stream.total_out);
exit(1);
} else {
printf("large_inflate(): OK\n");
}
}
/* ===========================================================================
* Test deflate() with full flush
*/
void test_flush(Byte *compr, uLong *comprLen)
{
z_stream c_stream; /* compression stream */
int err;
uInt len = (uInt)strlen(hello)+1;
c_stream.zalloc = (alloc_func)0;
c_stream.zfree = (free_func)0;
c_stream.opaque = (voidpf)0;
err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
CHECK_ERR(err, "deflateInit");
c_stream.next_in = (Bytef*)hello;
c_stream.next_out = compr;
c_stream.avail_in = 3;
c_stream.avail_out = (uInt)*comprLen;
err = deflate(&c_stream, Z_FULL_FLUSH);
CHECK_ERR(err, "deflate");
compr[3]++; /* force an error in first compressed block */
c_stream.avail_in = len - 3;
err = deflate(&c_stream, Z_FINISH);
if (err != Z_STREAM_END) {
CHECK_ERR(err, "deflate");
}
err = deflateEnd(&c_stream);
CHECK_ERR(err, "deflateEnd");
*comprLen = c_stream.total_out;
}
/* ===========================================================================
* Test inflateSync()
*/
void test_sync(Byte *compr, uLong comprLen, Byte *uncompr, uLong uncomprLen)
{
int err;
z_stream d_stream; /* decompression stream */
strcpy((char*)uncompr, "garbage");
d_stream.zalloc = (alloc_func)0;
d_stream.zfree = (free_func)0;
d_stream.opaque = (voidpf)0;
d_stream.next_in = compr;
d_stream.avail_in = 2; /* just read the zlib header */
err = inflateInit(&d_stream);
CHECK_ERR(err, "inflateInit");
d_stream.next_out = uncompr;
d_stream.avail_out = (uInt)uncomprLen;
inflate(&d_stream, Z_NO_FLUSH);
CHECK_ERR(err, "inflate");
d_stream.avail_in = (uInt)comprLen-2; /* read all compressed data */
err = inflateSync(&d_stream); /* but skip the damaged part */
CHECK_ERR(err, "inflateSync");
err = inflate(&d_stream, Z_FINISH);
if (err != Z_DATA_ERROR) {
fprintf(stderr, "inflate should report DATA_ERROR\n");
/* Because of incorrect adler32 */
exit(1);
}
err = inflateEnd(&d_stream);
CHECK_ERR(err, "inflateEnd");
printf("after inflateSync(): hel%s\n", (char *)uncompr);
}
/* ===========================================================================
* Test deflate() with preset dictionary
*/
void test_dict_deflate(Byte *compr, uLong comprLen)
{
z_stream c_stream; /* compression stream */
int err;
c_stream.zalloc = (alloc_func)0;
c_stream.zfree = (free_func)0;
c_stream.opaque = (voidpf)0;
err = deflateInit(&c_stream, Z_BEST_COMPRESSION);
CHECK_ERR(err, "deflateInit");
err = deflateSetDictionary(&c_stream,
(const Bytef*)dictionary, sizeof(dictionary));
CHECK_ERR(err, "deflateSetDictionary");
dictId = c_stream.adler;
c_stream.next_out = compr;
c_stream.avail_out = (uInt)comprLen;
c_stream.next_in = (Bytef*)hello;
c_stream.avail_in = (uInt)strlen(hello)+1;
err = deflate(&c_stream, Z_FINISH);
if (err != Z_STREAM_END) {
fprintf(stderr, "deflate should report Z_STREAM_END\n");
exit(1);
}
err = deflateEnd(&c_stream);
CHECK_ERR(err, "deflateEnd");
}
/* ===========================================================================
* Test inflate() with a preset dictionary
*/
void test_dict_inflate(Byte *compr, uLong comprLen, Byte *uncompr, uLong uncomprLen)
{
int err;
z_stream d_stream; /* decompression stream */
strcpy((char*)uncompr, "garbage");
d_stream.zalloc = (alloc_func)0;
d_stream.zfree = (free_func)0;
d_stream.opaque = (voidpf)0;
d_stream.next_in = compr;
d_stream.avail_in = (uInt)comprLen;
err = inflateInit(&d_stream);
CHECK_ERR(err, "inflateInit");
d_stream.next_out = uncompr;
d_stream.avail_out = (uInt)uncomprLen;
for (;;) {
err = inflate(&d_stream, Z_NO_FLUSH);
if (err == Z_STREAM_END) break;
if (err == Z_NEED_DICT) {
if (d_stream.adler != dictId) {
fprintf(stderr, "unexpected dictionary");
exit(1);
}
err = inflateSetDictionary(&d_stream, (const Bytef*)dictionary,
sizeof(dictionary));
}
CHECK_ERR(err, "inflate with dict");
}
err = inflateEnd(&d_stream);
CHECK_ERR(err, "inflateEnd");
if (strcmp((char*)uncompr, hello)) {
fprintf(stderr, "bad inflate with dict\n");
exit(1);
} else {
printf("inflate with dictionary: %s\n", (char *)uncompr);
}
}
/* ===========================================================================
* Usage: example [output.gz [input.gz]]
*/
int main(int argc, char *argv[])
{
Byte *compr, *uncompr;
uLong comprLen = 10000*sizeof(int); /* don't overflow on MSDOS */
uLong uncomprLen = comprLen;
static const char* myVersion = ZLIB_VERSION;
if (zlibVersion()[0] != myVersion[0]) {
fprintf(stderr, "incompatible zlib version\n");
exit(1);
} else if (strcmp(zlibVersion(), ZLIB_VERSION) != 0) {
fprintf(stderr, "warning: different zlib version\n");
}
printf("zlib version %s = 0x%04x, compile flags = 0x%lx\n",
ZLIB_VERSION, ZLIB_VERNUM, zlibCompileFlags());
compr = (Byte*)calloc((uInt)comprLen, 1);
uncompr = (Byte*)calloc((uInt)uncomprLen, 1);
/* compr and uncompr are cleared to avoid reading uninitialized
* data and to ensure that uncompr compresses well.
*/
if (compr == Z_NULL || uncompr == Z_NULL) {
printf("out of memory\n");
exit(1);
}
test_compress(compr, comprLen, uncompr, uncomprLen);
test_gzio((argc > 1 ? argv[1] : TESTFILE),
uncompr, uncomprLen);
test_deflate(compr, comprLen);
test_inflate(compr, comprLen, uncompr, uncomprLen);
test_large_deflate(compr, comprLen, uncompr, uncomprLen);
test_large_inflate(compr, comprLen, uncompr, uncomprLen);
test_flush(compr, &comprLen);
test_sync(compr, comprLen, uncompr, uncomprLen);
comprLen = uncomprLen;
test_dict_deflate(compr, comprLen);
test_dict_inflate(compr, comprLen, uncompr, uncomprLen);
free(compr);
free(uncompr);
return 0;
}

976
src/zlib/gzio.c Normal file
View File

@ -0,0 +1,976 @@
/* gzio.c -- IO on .gz files
* Copyright (C) 1995-2005 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*
* Compile this file with -DNO_GZCOMPRESS to avoid the compression code.
*/
/* @(#) $Id$ */
#include <stdio.h>
#include "zutil.h"
#ifdef NO_DEFLATE /* for compatibility with old definition */
# define NO_GZCOMPRESS
#endif
#ifndef NO_DUMMY_DECL
struct internal_state {int dummy;}; /* for buggy compilers */
#endif
#ifndef Z_BUFSIZE
# ifdef MAXSEG_64K
# define Z_BUFSIZE 4096 /* minimize memory usage for 16-bit DOS */
# else
# define Z_BUFSIZE 16384
# endif
#endif
#ifndef Z_PRINTF_BUFSIZE
# define Z_PRINTF_BUFSIZE 4096
#endif
#ifdef __MVS__
# pragma map (fdopen , "\174\174FDOPEN")
FILE *fdopen(int, const char *);
#endif
#ifndef STDC
extern voidp malloc OF((uInt size));
extern void free OF((voidpf ptr));
#endif
#define ALLOC(size) malloc(size)
#define TRYFREE(p) {if (p) free(p);}
static int const gz_magic[2] = {0x1f, 0x8b}; /* gzip magic header */
/* gzip flag byte */
#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */
#define HEAD_CRC 0x02 /* bit 1 set: header CRC present */
#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
#define COMMENT 0x10 /* bit 4 set: file comment present */
#define RESERVED 0xE0 /* bits 5..7: reserved */
typedef struct gz_stream {
z_stream stream;
int z_err; /* error code for last stream operation */
int z_eof; /* set if end of input file */
FILE *file; /* .gz file */
Byte *inbuf; /* input buffer */
Byte *outbuf; /* output buffer */
uLong crc; /* crc32 of uncompressed data */
char *msg; /* error message */
char *path; /* path name for debugging only */
int transparent; /* 1 if input file is not a .gz file */
char mode; /* 'w' or 'r' */
z_off_t start; /* start of compressed data in file (header skipped) */
z_off_t in; /* bytes into deflate or inflate */
z_off_t out; /* bytes out of deflate or inflate */
int back; /* one character push-back */
int last; /* true if push-back is last character */
} gz_stream;
local gzFile gz_open OF((const char *path, const char *mode, int fd));
local int do_flush OF((gzFile file, int flush));
local int get_byte OF((gz_stream *s));
local void check_header OF((gz_stream *s));
local int destroy OF((gz_stream *s));
local void putLong OF((FILE *file, uLong x));
local uLong getLong OF((gz_stream *s));
/* ===========================================================================
Opens a gzip (.gz) file for reading or writing. The mode parameter
is as in fopen ("rb" or "wb"). The file is given either by file descriptor
or path name (if fd == -1).
gz_open returns NULL if the file could not be opened or if there was
insufficient memory to allocate the (de)compression state; errno
can be checked to distinguish the two cases (if errno is zero, the
zlib error is Z_MEM_ERROR).
*/
local gzFile gz_open (const char *path, const char *mode, int fd)
{
int err;
int level = Z_DEFAULT_COMPRESSION; /* compression level */
int strategy = Z_DEFAULT_STRATEGY; /* compression strategy */
char *p = (char*)mode;
gz_stream *s;
char fmode[80]; /* copy of mode, without the compression level */
char *m = fmode;
if (!path || !mode) return Z_NULL;
s = (gz_stream *)ALLOC(sizeof(gz_stream));
if (!s) return Z_NULL;
s->stream.zalloc = (alloc_func)0;
s->stream.zfree = (free_func)0;
s->stream.opaque = (voidpf)0;
s->stream.next_in = s->inbuf = Z_NULL;
s->stream.next_out = s->outbuf = Z_NULL;
s->stream.avail_in = s->stream.avail_out = 0;
s->file = NULL;
s->z_err = Z_OK;
s->z_eof = 0;
s->in = 0;
s->out = 0;
s->back = EOF;
s->crc = crc32(0L, Z_NULL, 0);
s->msg = NULL;
s->transparent = 0;
s->path = (char*)ALLOC(strlen(path)+1);
if (s->path == NULL) {
return destroy(s), (gzFile)Z_NULL;
}
strcpy(s->path, path); /* do this early for debugging */
s->mode = '\0';
do {
if (*p == 'r') s->mode = 'r';
if (*p == 'w' || *p == 'a') s->mode = 'w';
if (*p >= '0' && *p <= '9') {
level = *p - '0';
} else if (*p == 'f') {
strategy = Z_FILTERED;
} else if (*p == 'h') {
strategy = Z_HUFFMAN_ONLY;
} else if (*p == 'R') {
strategy = Z_RLE;
} else {
*m++ = *p; /* copy the mode */
}
} while (*p++ && m != fmode + sizeof(fmode));
if (s->mode == '\0') return destroy(s), (gzFile)Z_NULL;
if (s->mode == 'w') {
#ifdef NO_GZCOMPRESS
err = Z_STREAM_ERROR;
#else
err = deflateInit2(&(s->stream), level,
Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, strategy);
/* windowBits is passed < 0 to suppress zlib header */
s->stream.next_out = s->outbuf = (Byte*)ALLOC(Z_BUFSIZE);
#endif
if (err != Z_OK || s->outbuf == Z_NULL) {
return destroy(s), (gzFile)Z_NULL;
}
} else {
s->stream.next_in = s->inbuf = (Byte*)ALLOC(Z_BUFSIZE);
err = inflateInit2(&(s->stream), -MAX_WBITS);
/* windowBits is passed < 0 to tell that there is no zlib header.
* Note that in this case inflate *requires* an extra "dummy" byte
* after the compressed stream in order to complete decompression and
* return Z_STREAM_END. Here the gzip CRC32 ensures that 4 bytes are
* present after the compressed stream.
*/
if (err != Z_OK || s->inbuf == Z_NULL) {
return destroy(s), (gzFile)Z_NULL;
}
}
s->stream.avail_out = Z_BUFSIZE;
errno = 0;
s->file = fd < 0 ? F_OPEN(path, fmode) : (FILE*)fdopen(fd, fmode);
if (s->file == NULL) {
return destroy(s), (gzFile)Z_NULL;
}
if (s->mode == 'w') {
/* Write a very simple .gz header:
*/
fprintf(s->file, "%c%c%c%c%c%c%c%c%c%c", gz_magic[0], gz_magic[1],
Z_DEFLATED, 0 /*flags*/, 0,0,0,0 /*time*/, 0 /*xflags*/, OS_CODE);
s->start = 10L;
/* We use 10L instead of ftell(s->file) to because ftell causes an
* fflush on some systems. This version of the library doesn't use
* start anyway in write mode, so this initialization is not
* necessary.
*/
} else {
check_header(s); /* skip the .gz header */
s->start = ftell(s->file) - s->stream.avail_in;
}
return (gzFile)s;
}
/* ===========================================================================
Opens a gzip (.gz) file for reading or writing.
*/
gzFile ZEXPORT gzopen (const char *path, const char *mode)
{
return gz_open (path, mode, -1);
}
/* ===========================================================================
Associate a gzFile with the file descriptor fd. fd is not dup'ed here
to mimic the behavio(u)r of fdopen.
*/
gzFile ZEXPORT gzdopen (int fd, const char *mode)
{
char name[46]; /* allow for up to 128-bit integers */
if (fd < 0) return (gzFile)Z_NULL;
sprintf(name, "<fd:%d>", fd); /* for debugging */
return gz_open (name, mode, fd);
}
/* ===========================================================================
* Update the compression level and strategy
*/
int ZEXPORT gzsetparams (gzFile file, int level, int strategy)
{
gz_stream *s = (gz_stream*)file;
if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
/* Make room to allow flushing */
if (s->stream.avail_out == 0) {
s->stream.next_out = s->outbuf;
if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) {
s->z_err = Z_ERRNO;
}
s->stream.avail_out = Z_BUFSIZE;
}
return deflateParams (&(s->stream), level, strategy);
}
/* ===========================================================================
Read a byte from a gz_stream; update next_in and avail_in. Return EOF
for end of file.
IN assertion: the stream s has been sucessfully opened for reading.
*/
local int get_byte(gz_stream *s)
{
if (s->z_eof) return EOF;
if (s->stream.avail_in == 0) {
errno = 0;
s->stream.avail_in = (uInt)fread(s->inbuf, 1, Z_BUFSIZE, s->file);
if (s->stream.avail_in == 0) {
s->z_eof = 1;
if (ferror(s->file)) s->z_err = Z_ERRNO;
return EOF;
}
s->stream.next_in = s->inbuf;
}
s->stream.avail_in--;
return *(s->stream.next_in)++;
}
/* ===========================================================================
Check the gzip header of a gz_stream opened for reading. Set the stream
mode to transparent if the gzip magic header is not present; set s->err
to Z_DATA_ERROR if the magic header is present but the rest of the header
is incorrect.
IN assertion: the stream s has already been created sucessfully;
s->stream.avail_in is zero for the first time, but may be non-zero
for concatenated .gz files.
*/
local void check_header(gz_stream *s)
{
int method; /* method byte */
int flags; /* flags byte */
uInt len;
int c;
/* Assure two bytes in the buffer so we can peek ahead -- handle case
where first byte of header is at the end of the buffer after the last
gzip segment */
len = s->stream.avail_in;
if (len < 2) {
if (len) s->inbuf[0] = s->stream.next_in[0];
errno = 0;
len = (uInt)fread(s->inbuf + len, 1, Z_BUFSIZE >> len, s->file);
if (len == 0 && ferror(s->file)) s->z_err = Z_ERRNO;
s->stream.avail_in += len;
s->stream.next_in = s->inbuf;
if (s->stream.avail_in < 2) {
s->transparent = s->stream.avail_in;
return;
}
}
/* Peek ahead to check the gzip magic header */
if (s->stream.next_in[0] != gz_magic[0] ||
s->stream.next_in[1] != gz_magic[1]) {
s->transparent = 1;
return;
}
s->stream.avail_in -= 2;
s->stream.next_in += 2;
/* Check the rest of the gzip header */
method = get_byte(s);
flags = get_byte(s);
if (method != Z_DEFLATED || (flags & RESERVED) != 0) {
s->z_err = Z_DATA_ERROR;
return;
}
/* Discard time, xflags and OS code: */
for (len = 0; len < 6; len++) (void)get_byte(s);
if ((flags & EXTRA_FIELD) != 0) { /* skip the extra field */
len = (uInt)get_byte(s);
len += ((uInt)get_byte(s))<<8;
/* len is garbage if EOF but the loop below will quit anyway */
while (len-- != 0 && get_byte(s) != EOF) ;
}
if ((flags & ORIG_NAME) != 0) { /* skip the original file name */
while ((c = get_byte(s)) != 0 && c != EOF) ;
}
if ((flags & COMMENT) != 0) { /* skip the .gz file comment */
while ((c = get_byte(s)) != 0 && c != EOF) ;
}
if ((flags & HEAD_CRC) != 0) { /* skip the header crc */
for (len = 0; len < 2; len++) (void)get_byte(s);
}
s->z_err = s->z_eof ? Z_DATA_ERROR : Z_OK;
}
/* ===========================================================================
* Cleanup then free the given gz_stream. Return a zlib error code.
Try freeing in the reverse order of allocations.
*/
local int destroy (gz_stream *s)
{
int err = Z_OK;
if (!s) return Z_STREAM_ERROR;
TRYFREE(s->msg);
if (s->stream.state != NULL) {
if (s->mode == 'w') {
#ifdef NO_GZCOMPRESS
err = Z_STREAM_ERROR;
#else
err = deflateEnd(&(s->stream));
#endif
} else if (s->mode == 'r') {
err = inflateEnd(&(s->stream));
}
}
if (s->file != NULL && fclose(s->file)) {
#ifdef ESPIPE
if (errno != ESPIPE) /* fclose is broken for pipes in HP/UX */
#endif
err = Z_ERRNO;
}
if (s->z_err < 0) err = s->z_err;
TRYFREE(s->inbuf);
TRYFREE(s->outbuf);
TRYFREE(s->path);
TRYFREE(s);
return err;
}
/* ===========================================================================
Reads the given number of uncompressed bytes from the compressed file.
gzread returns the number of bytes actually read (0 for end of file).
*/
int ZEXPORT gzread (gzFile file, voidp buf, unsigned len)
{
gz_stream *s = (gz_stream*)file;
Bytef *start = (Bytef*)buf; /* starting point for crc computation */
Byte *next_out; /* == stream.next_out but not forced far (for MSDOS) */
if (s == NULL || s->mode != 'r') return Z_STREAM_ERROR;
if (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO) return -1;
if (s->z_err == Z_STREAM_END) return 0; /* EOF */
next_out = (Byte*)buf;
s->stream.next_out = (Bytef*)buf;
s->stream.avail_out = len;
if (s->stream.avail_out && s->back != EOF) {
*next_out++ = s->back;
s->stream.next_out++;
s->stream.avail_out--;
s->back = EOF;
s->out++;
start++;
if (s->last) {
s->z_err = Z_STREAM_END;
return 1;
}
}
while (s->stream.avail_out != 0) {
if (s->transparent) {
/* Copy first the lookahead bytes: */
uInt n = s->stream.avail_in;
if (n > s->stream.avail_out) n = s->stream.avail_out;
if (n > 0) {
zmemcpy(s->stream.next_out, s->stream.next_in, n);
next_out += n;
s->stream.next_out = next_out;
s->stream.next_in += n;
s->stream.avail_out -= n;
s->stream.avail_in -= n;
}
if (s->stream.avail_out > 0) {
s->stream.avail_out -=
(uInt)fread(next_out, 1, s->stream.avail_out, s->file);
}
len -= s->stream.avail_out;
s->in += len;
s->out += len;
if (len == 0) s->z_eof = 1;
return (int)len;
}
if (s->stream.avail_in == 0 && !s->z_eof) {
errno = 0;
s->stream.avail_in = (uInt)fread(s->inbuf, 1, Z_BUFSIZE, s->file);
if (s->stream.avail_in == 0) {
s->z_eof = 1;
if (ferror(s->file)) {
s->z_err = Z_ERRNO;
break;
}
}
s->stream.next_in = s->inbuf;
}
s->in += s->stream.avail_in;
s->out += s->stream.avail_out;
s->z_err = inflate(&(s->stream), Z_NO_FLUSH);
s->in -= s->stream.avail_in;
s->out -= s->stream.avail_out;
if (s->z_err == Z_STREAM_END) {
/* Check CRC and original size */
s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));
start = s->stream.next_out;
if (getLong(s) != s->crc) {
s->z_err = Z_DATA_ERROR;
} else {
(void)getLong(s);
/* The uncompressed length returned by above getlong() may be
* different from s->out in case of concatenated .gz files.
* Check for such files:
*/
check_header(s);
if (s->z_err == Z_OK) {
inflateReset(&(s->stream));
s->crc = crc32(0L, Z_NULL, 0);
}
}
}
if (s->z_err != Z_OK || s->z_eof) break;
}
s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));
if (len == s->stream.avail_out &&
(s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO))
return -1;
return (int)(len - s->stream.avail_out);
}
/* ===========================================================================
Reads one byte from the compressed file. gzgetc returns this byte
or -1 in case of end of file or error.
*/
int ZEXPORT gzgetc(gzFile file)
{
unsigned char c;
return gzread(file, &c, 1) == 1 ? c : -1;
}
/* ===========================================================================
Push one byte back onto the stream.
*/
int ZEXPORT gzungetc(int c, gzFile file)
{
gz_stream *s = (gz_stream*)file;
if (s == NULL || s->mode != 'r' || c == EOF || s->back != EOF) return EOF;
s->back = c;
s->out--;
s->last = (s->z_err == Z_STREAM_END);
if (s->last) s->z_err = Z_OK;
s->z_eof = 0;
return c;
}
/* ===========================================================================
Reads bytes from the compressed file until len-1 characters are
read, or a newline character is read and transferred to buf, or an
end-of-file condition is encountered. The string is then terminated
with a null character.
gzgets returns buf, or Z_NULL in case of error.
The current implementation is not optimized at all.
*/
char * ZEXPORT gzgets(gzFile file, char *buf, int len)
{
char *b = buf;
if (buf == Z_NULL || len <= 0) return Z_NULL;
while (--len > 0 && gzread(file, buf, 1) == 1 && *buf++ != '\n') ;
*buf = '\0';
return b == buf && len > 0 ? Z_NULL : b;
}
#ifndef NO_GZCOMPRESS
/* ===========================================================================
Writes the given number of uncompressed bytes into the compressed file.
gzwrite returns the number of bytes actually written (0 in case of error).
*/
int ZEXPORT gzwrite (gzFile file, voidpc buf, unsigned len)
{
gz_stream *s = (gz_stream*)file;
if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
s->stream.next_in = (Bytef*)buf;
s->stream.avail_in = len;
while (s->stream.avail_in != 0) {
if (s->stream.avail_out == 0) {
s->stream.next_out = s->outbuf;
if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) {
s->z_err = Z_ERRNO;
break;
}
s->stream.avail_out = Z_BUFSIZE;
}
s->in += s->stream.avail_in;
s->out += s->stream.avail_out;
s->z_err = deflate(&(s->stream), Z_NO_FLUSH);
s->in -= s->stream.avail_in;
s->out -= s->stream.avail_out;
if (s->z_err != Z_OK) break;
}
s->crc = crc32(s->crc, (const Bytef *)buf, len);
return (int)(len - s->stream.avail_in);
}
/* ===========================================================================
Converts, formats, and writes the args to the compressed file under
control of the format string, as in fprintf. gzprintf returns the number of
uncompressed bytes actually written (0 in case of error).
*/
#ifdef STDC
#include <stdarg.h>
int ZEXPORTVA gzprintf (gzFile file, const char *format, /* args */ ...)
{
char buf[Z_PRINTF_BUFSIZE];
va_list va;
int len;
buf[sizeof(buf) - 1] = 0;
va_start(va, format);
#ifdef NO_vsnprintf
# ifdef HAS_vsprintf_void
(void)vsprintf(buf, format, va);
va_end(va);
for (len = 0; len < sizeof(buf); len++)
if (buf[len] == 0) break;
# else
len = vsprintf(buf, format, va);
va_end(va);
# endif
#else
# ifdef HAS_vsnprintf_void
(void)vsnprintf(buf, sizeof(buf), format, va);
va_end(va);
len = strlen(buf);
# else
len = vsnprintf(buf, sizeof(buf), format, va);
va_end(va);
# endif
#endif
if (len <= 0 || len >= (int)sizeof(buf) || buf[sizeof(buf) - 1] != 0)
return 0;
return gzwrite(file, buf, (unsigned)len);
}
#else /* not ANSI C */
int ZEXPORTVA gzprintf (gzFile file, const char *format, int a1, int a2, int a3, int a4,
int a5, int a6, int a7, int a8, int a9, int a10, int a11, int a12,
int a13, int a14, int a15, int a16, int a17, int a18, int a19, int a20)
{
char buf[Z_PRINTF_BUFSIZE];
int len;
buf[sizeof(buf) - 1] = 0;
#ifdef NO_snprintf
# ifdef HAS_sprintf_void
sprintf(buf, format, a1, a2, a3, a4, a5, a6, a7, a8,
a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
for (len = 0; len < sizeof(buf); len++)
if (buf[len] == 0) break;
# else
len = sprintf(buf, format, a1, a2, a3, a4, a5, a6, a7, a8,
a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
# endif
#else
# ifdef HAS_snprintf_void
snprintf(buf, sizeof(buf), format, a1, a2, a3, a4, a5, a6, a7, a8,
a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
len = strlen(buf);
# else
len = snprintf(buf, sizeof(buf), format, a1, a2, a3, a4, a5, a6, a7, a8,
a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
# endif
#endif
if (len <= 0 || len >= sizeof(buf) || buf[sizeof(buf) - 1] != 0)
return 0;
return gzwrite(file, buf, len);
}
#endif
/* ===========================================================================
Writes c, converted to an unsigned char, into the compressed file.
gzputc returns the value that was written, or -1 in case of error.
*/
int ZEXPORT gzputc(gzFile file, int c)
{
unsigned char cc = (unsigned char) c; /* required for big endian systems */
return gzwrite(file, &cc, 1) == 1 ? (int)cc : -1;
}
/* ===========================================================================
Writes the given null-terminated string to the compressed file, excluding
the terminating null character.
gzputs returns the number of characters written, or -1 in case of error.
*/
int ZEXPORT gzputs(gzFile file, const char *s)
{
return gzwrite(file, (char*)s, (unsigned)strlen(s));
}
/* ===========================================================================
Flushes all pending output into the compressed file. The parameter
flush is as in the deflate() function.
*/
local int do_flush (gzFile file, int flush)
{
uInt len;
int done = 0;
gz_stream *s = (gz_stream*)file;
if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
s->stream.avail_in = 0; /* should be zero already anyway */
for (;;) {
len = Z_BUFSIZE - s->stream.avail_out;
if (len != 0) {
if ((uInt)fwrite(s->outbuf, 1, len, s->file) != len) {
s->z_err = Z_ERRNO;
return Z_ERRNO;
}
s->stream.next_out = s->outbuf;
s->stream.avail_out = Z_BUFSIZE;
}
if (done) break;
s->out += s->stream.avail_out;
s->z_err = deflate(&(s->stream), flush);
s->out -= s->stream.avail_out;
/* Ignore the second of two consecutive flushes: */
if (len == 0 && s->z_err == Z_BUF_ERROR) s->z_err = Z_OK;
/* deflate has finished flushing only when it hasn't used up
* all the available space in the output buffer:
*/
done = (s->stream.avail_out != 0 || s->z_err == Z_STREAM_END);
if (s->z_err != Z_OK && s->z_err != Z_STREAM_END) break;
}
return s->z_err == Z_STREAM_END ? Z_OK : s->z_err;
}
int ZEXPORT gzflush (gzFile file, int flush)
{
gz_stream *s = (gz_stream*)file;
int err = do_flush (file, flush);
if (err) return err;
fflush(s->file);
return s->z_err == Z_STREAM_END ? Z_OK : s->z_err;
}
#endif /* NO_GZCOMPRESS */
/* ===========================================================================
Sets the starting position for the next gzread or gzwrite on the given
compressed file. The offset represents a number of bytes in the
gzseek returns the resulting offset location as measured in bytes from
the beginning of the uncompressed stream, or -1 in case of error.
SEEK_END is not implemented, returns error.
In this version of the library, gzseek can be extremely slow.
*/
z_off_t ZEXPORT gzseek (gzFile file, z_off_t offset, int whence)
{
gz_stream *s = (gz_stream*)file;
if (s == NULL || whence == SEEK_END ||
s->z_err == Z_ERRNO || s->z_err == Z_DATA_ERROR) {
return -1L;
}
if (s->mode == 'w') {
#ifdef NO_GZCOMPRESS
return -1L;
#else
if (whence == SEEK_SET) {
offset -= s->in;
}
if (offset < 0) return -1L;
/* At this point, offset is the number of zero bytes to write. */
if (s->inbuf == Z_NULL) {
s->inbuf = (Byte*)ALLOC(Z_BUFSIZE); /* for seeking */
if (s->inbuf == Z_NULL) return -1L;
zmemzero(s->inbuf, Z_BUFSIZE);
}
while (offset > 0) {
uInt size = Z_BUFSIZE;
if (offset < Z_BUFSIZE) size = (uInt)offset;
size = gzwrite(file, s->inbuf, size);
if (size == 0) return -1L;
offset -= size;
}
return s->in;
#endif
}
/* Rest of function is for reading only */
/* compute absolute position */
if (whence == SEEK_CUR) {
offset += s->out;
}
if (offset < 0) return -1L;
if (s->transparent) {
/* map to fseek */
s->back = EOF;
s->stream.avail_in = 0;
s->stream.next_in = s->inbuf;
if (fseek(s->file, offset, SEEK_SET) < 0) return -1L;
s->in = s->out = offset;
return offset;
}
/* For a negative seek, rewind and use positive seek */
if (offset >= s->out) {
offset -= s->out;
} else if (gzrewind(file) < 0) {
return -1L;
}
/* offset is now the number of bytes to skip. */
if (offset != 0 && s->outbuf == Z_NULL) {
s->outbuf = (Byte*)ALLOC(Z_BUFSIZE);
if (s->outbuf == Z_NULL) return -1L;
}
if (offset && s->back != EOF) {
s->back = EOF;
s->out++;
offset--;
if (s->last) s->z_err = Z_STREAM_END;
}
while (offset > 0) {
int size = Z_BUFSIZE;
if (offset < Z_BUFSIZE) size = (int)offset;
size = gzread(file, s->outbuf, (uInt)size);
if (size <= 0) return -1L;
offset -= size;
}
return s->out;
}
/* ===========================================================================
Rewinds input file.
*/
int ZEXPORT gzrewind (gzFile file)
{
gz_stream *s = (gz_stream*)file;
if (s == NULL || s->mode != 'r') return -1;
s->z_err = Z_OK;
s->z_eof = 0;
s->back = EOF;
s->stream.avail_in = 0;
s->stream.next_in = s->inbuf;
s->crc = crc32(0L, Z_NULL, 0);
if (!s->transparent) (void)inflateReset(&s->stream);
s->in = 0;
s->out = 0;
return fseek(s->file, s->start, SEEK_SET);
}
/* ===========================================================================
Returns the starting position for the next gzread or gzwrite on the
given compressed file. This position represents a number of bytes in the
uncompressed data stream.
*/
z_off_t ZEXPORT gztell (gzFile file)
{
return gzseek(file, 0L, SEEK_CUR);
}
/* ===========================================================================
Returns 1 when EOF has previously been detected reading the given
input stream, otherwise zero.
*/
int ZEXPORT gzeof (gzFile file)
{
gz_stream *s = (gz_stream*)file;
/* With concatenated compressed files that can have embedded
* crc trailers, z_eof is no longer the only/best indicator of EOF
* on a gz_stream. Handle end-of-stream error explicitly here.
*/
if (s == NULL || s->mode != 'r') return 0;
if (s->z_eof) return 1;
return s->z_err == Z_STREAM_END;
}
/* ===========================================================================
Returns 1 if reading and doing so transparently, otherwise zero.
*/
int ZEXPORT gzdirect (gzFile file)
{
gz_stream *s = (gz_stream*)file;
if (s == NULL || s->mode != 'r') return 0;
return s->transparent;
}
/* ===========================================================================
Outputs a long in LSB order to the given file
*/
local void putLong (FILE *file, uLong x)
{
int n;
for (n = 0; n < 4; n++) {
fputc((int)(x & 0xff), file);
x >>= 8;
}
}
/* ===========================================================================
Reads a long in LSB order from the given gz_stream. Sets z_err in case
of error.
*/
local uLong getLong (gz_stream *s)
{
uLong x = (uLong)get_byte(s);
int c;
x += ((uLong)get_byte(s))<<8;
x += ((uLong)get_byte(s))<<16;
c = get_byte(s);
if (c == EOF) s->z_err = Z_DATA_ERROR;
x += ((uLong)c)<<24;
return x;
}
/* ===========================================================================
Flushes all pending output if necessary, closes the compressed file
and deallocates all the (de)compression state.
*/
int ZEXPORT gzclose (gzFile file)
{
gz_stream *s = (gz_stream*)file;
if (s == NULL) return Z_STREAM_ERROR;
if (s->mode == 'w') {
#ifdef NO_GZCOMPRESS
return Z_STREAM_ERROR;
#else
if (do_flush (file, Z_FINISH) != Z_OK)
return destroy((gz_stream*)file);
putLong (s->file, s->crc);
putLong (s->file, (uLong)(s->in & 0xffffffff));
#endif
}
return destroy((gz_stream*)file);
}
#ifdef STDC
# define zstrerror(errnum) strerror(errnum)
#else
# define zstrerror(errnum) ""
#endif
/* ===========================================================================
Returns the error message for the last error which occurred on the
given compressed file. errnum is set to zlib error number. If an
error occurred in the file system and not in the compression library,
errnum is set to Z_ERRNO and the application may consult errno
to get the exact error code.
*/
const char * ZEXPORT gzerror (gzFile file, int *errnum)
{
char *m;
gz_stream *s = (gz_stream*)file;
if (s == NULL) {
*errnum = Z_STREAM_ERROR;
return (const char*)ERR_MSG(Z_STREAM_ERROR);
}
*errnum = s->z_err;
if (*errnum == Z_OK) return (const char*)"";
m = (char*)(*errnum == Z_ERRNO ? zstrerror(errno) : s->stream.msg);
if (m == NULL || *m == '\0') m = (char*)ERR_MSG(s->z_err);
TRYFREE(s->msg);
s->msg = (char*)ALLOC(strlen(s->path) + strlen(m) + 3);
if (s->msg == Z_NULL) return (const char*)ERR_MSG(Z_MEM_ERROR);
strcpy(s->msg, s->path);
strcat(s->msg, ": ");
strcat(s->msg, m);
return (const char*)s->msg;
}
/* ===========================================================================
Clear the error and end-of-file flags, and do the same for the real file.
*/
void ZEXPORT gzclearerr (gzFile file)
{
gz_stream *s = (gz_stream*)file;
if (s == NULL) return;
if (s->z_err != Z_STREAM_END) s->z_err = Z_OK;
s->z_eof = 0;
clearerr(s->file);
}

613
src/zlib/infback.c Normal file
View File

@ -0,0 +1,613 @@
/* infback.c -- inflate using a call-back interface
* Copyright (C) 1995-2005 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/*
This code is largely copied from inflate.c. Normally either infback.o or
inflate.o would be linked into an application--not both. The interface
with inffast.c is retained so that optimized assembler-coded versions of
inflate_fast() can be used with either inflate.c or infback.c.
*/
#include "zutil.h"
#include "inftrees.h"
#include "inflate.h"
#include "inffast.h"
/* function prototypes */
local void fixedtables OF((struct inflate_state FAR *state));
/*
strm provides memory allocation functions in zalloc and zfree, or
Z_NULL to use the library memory allocation functions.
windowBits is in the range 8..15, and window is a user-supplied
window and output buffer that is 2**windowBits bytes.
*/
int ZEXPORT inflateBackInit_(z_streamp strm, int windowBits, unsigned char FAR *window,
const char *version, int stream_size)
{
struct inflate_state FAR *state;
if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
stream_size != (int)(sizeof(z_stream)))
return Z_VERSION_ERROR;
if (strm == Z_NULL || window == Z_NULL ||
windowBits < 8 || windowBits > 15)
return Z_STREAM_ERROR;
strm->msg = Z_NULL; /* in case we return an error */
if (strm->zalloc == (alloc_func)0) {
strm->zalloc = zcalloc;
strm->opaque = (voidpf)0;
}
if (strm->zfree == (free_func)0) strm->zfree = zcfree;
state = (struct inflate_state FAR *)ZALLOC(strm, 1,
sizeof(struct inflate_state));
if (state == Z_NULL) return Z_MEM_ERROR;
Tracev((stderr, "inflate: allocated\n"));
strm->state = (struct internal_state FAR *)state;
state->dmax = 32768U;
state->wbits = windowBits;
state->wsize = 1U << windowBits;
state->window = window;
state->write = 0;
state->whave = 0;
return Z_OK;
}
/*
Return state with length and distance decoding tables and index sizes set to
fixed code decoding. Normally this returns fixed tables from inffixed.h.
If BUILDFIXED is defined, then instead this routine builds the tables the
first time it's called, and returns those tables the first time and
thereafter. This reduces the size of the code by about 2K bytes, in
exchange for a little execution time. However, BUILDFIXED should not be
used for threaded applications, since the rewriting of the tables and virgin
may not be thread-safe.
*/
local void fixedtables(struct inflate_state FAR *state)
{
#ifdef BUILDFIXED
static int virgin = 1;
static code *lenfix, *distfix;
static code fixed[544];
/* build fixed huffman tables if first call (may not be thread safe) */
if (virgin) {
unsigned sym, bits;
static code *next;
/* literal/length table */
sym = 0;
while (sym < 144) state->lens[sym++] = 8;
while (sym < 256) state->lens[sym++] = 9;
while (sym < 280) state->lens[sym++] = 7;
while (sym < 288) state->lens[sym++] = 8;
next = fixed;
lenfix = next;
bits = 9;
inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work);
/* distance table */
sym = 0;
while (sym < 32) state->lens[sym++] = 5;
distfix = next;
bits = 5;
inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work);
/* do this just once */
virgin = 0;
}
#else /* !BUILDFIXED */
# include "inffixed.h"
#endif /* BUILDFIXED */
state->lencode = lenfix;
state->lenbits = 9;
state->distcode = distfix;
state->distbits = 5;
}
/* Macros for inflateBack(): */
/* Load returned state from inflate_fast() */
#define LOAD() \
do { \
put = strm->next_out; \
left = strm->avail_out; \
next = strm->next_in; \
have = strm->avail_in; \
hold = state->hold; \
bits = state->bits; \
} while (0)
/* Set state from registers for inflate_fast() */
#define RESTORE() \
do { \
strm->next_out = put; \
strm->avail_out = left; \
strm->next_in = next; \
strm->avail_in = have; \
state->hold = hold; \
state->bits = bits; \
} while (0)
/* Clear the input bit accumulator */
#define INITBITS() \
do { \
hold = 0; \
bits = 0; \
} while (0)
/* Assure that some input is available. If input is requested, but denied,
then return a Z_BUF_ERROR from inflateBack(). */
#define PULL() \
do { \
if (have == 0) { \
have = in(in_desc, &next); \
if (have == 0) { \
next = Z_NULL; \
ret = Z_BUF_ERROR; \
goto inf_leave; \
} \
} \
} while (0)
/* Get a byte of input into the bit accumulator, or return from inflateBack()
with an error if there is no input available. */
#define PULLBYTE() \
do { \
PULL(); \
have--; \
hold += (unsigned long)(*next++) << bits; \
bits += 8; \
} while (0)
/* Assure that there are at least n bits in the bit accumulator. If there is
not enough available input to do that, then return from inflateBack() with
an error. */
#define NEEDBITS(n) \
do { \
while (bits < (unsigned)(n)) \
PULLBYTE(); \
} while (0)
/* Return the low n bits of the bit accumulator (n < 16) */
#define BITS(n) \
((unsigned)hold & ((1U << (n)) - 1))
/* Remove n bits from the bit accumulator */
#define DROPBITS(n) \
do { \
hold >>= (n); \
bits -= (unsigned)(n); \
} while (0)
/* Remove zero to seven bits as needed to go to a byte boundary */
#define BYTEBITS() \
do { \
hold >>= bits & 7; \
bits -= bits & 7; \
} while (0)
/* Assure that some output space is available, by writing out the window
if it's full. If the write fails, return from inflateBack() with a
Z_BUF_ERROR. */
#define ROOM() \
do { \
if (left == 0) { \
put = state->window; \
left = state->wsize; \
state->whave = left; \
if (out(out_desc, put, left)) { \
ret = Z_BUF_ERROR; \
goto inf_leave; \
} \
} \
} while (0)
/*
strm provides the memory allocation functions and window buffer on input,
and provides information on the unused input on return. For Z_DATA_ERROR
returns, strm will also provide an error message.
in() and out() are the call-back input and output functions. When
inflateBack() needs more input, it calls in(). When inflateBack() has
filled the window with output, or when it completes with data in the
window, it calls out() to write out the data. The application must not
change the provided input until in() is called again or inflateBack()
returns. The application must not change the window/output buffer until
inflateBack() returns.
in() and out() are called with a descriptor parameter provided in the
inflateBack() call. This parameter can be a structure that provides the
information required to do the read or write, as well as accumulated
information on the input and output such as totals and check values.
in() should return zero on failure. out() should return non-zero on
failure. If either in() or out() fails, than inflateBack() returns a
Z_BUF_ERROR. strm->next_in can be checked for Z_NULL to see whether it
was in() or out() that caused in the error. Otherwise, inflateBack()
returns Z_STREAM_END on success, Z_DATA_ERROR for an deflate format
error, or Z_MEM_ERROR if it could not allocate memory for the state.
inflateBack() can also return Z_STREAM_ERROR if the input parameters
are not correct, i.e. strm is Z_NULL or the state was not initialized.
*/
int ZEXPORT inflateBack(z_streamp strm, in_func in, void FAR *in_desc,
out_func out, void FAR *out_desc)
{
struct inflate_state FAR *state;
unsigned char FAR *next; /* next input */
unsigned char FAR *put; /* next output */
unsigned have, left; /* available input and output */
unsigned long hold; /* bit buffer */
unsigned bits; /* bits in bit buffer */
unsigned copy; /* number of stored or match bytes to copy */
unsigned char FAR *from; /* where to copy match bytes from */
code This; /* current decoding table entry */
code last; /* parent table entry */
unsigned len; /* length to copy for repeats, bits to drop */
int ret; /* return code */
static const unsigned short order[19] = /* permutation of code lengths */
{16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
/* Check that the strm exists and that the state was initialized */
if (strm == Z_NULL || strm->state == Z_NULL)
return Z_STREAM_ERROR;
state = (struct inflate_state FAR *)strm->state;
/* Reset the state */
strm->msg = Z_NULL;
state->mode = TYPE;
state->last = 0;
state->whave = 0;
next = strm->next_in;
have = next != Z_NULL ? strm->avail_in : 0;
hold = 0;
bits = 0;
put = state->window;
left = state->wsize;
/* Inflate until end of block marked as last */
for (;;)
switch (state->mode) {
case TYPE:
/* determine and dispatch block type */
if (state->last) {
BYTEBITS();
state->mode = DONE;
break;
}
NEEDBITS(3);
state->last = BITS(1);
DROPBITS(1);
switch (BITS(2)) {
case 0: /* stored block */
Tracev((stderr, "inflate: stored block%s\n",
state->last ? " (last)" : ""));
state->mode = STORED;
break;
case 1: /* fixed block */
fixedtables(state);
Tracev((stderr, "inflate: fixed codes block%s\n",
state->last ? " (last)" : ""));
state->mode = LEN; /* decode codes */
break;
case 2: /* dynamic block */
Tracev((stderr, "inflate: dynamic codes block%s\n",
state->last ? " (last)" : ""));
state->mode = TABLE;
break;
case 3:
strm->msg = (char *)"invalid block type";
state->mode = BAD;
}
DROPBITS(2);
break;
case STORED:
/* get and verify stored block length */
BYTEBITS(); /* go to byte boundary */
NEEDBITS(32);
if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
strm->msg = (char *)"invalid stored block lengths";
state->mode = BAD;
break;
}
state->length = (unsigned)hold & 0xffff;
Tracev((stderr, "inflate: stored length %u\n",
state->length));
INITBITS();
/* copy stored block from input to output */
while (state->length != 0) {
copy = state->length;
PULL();
ROOM();
if (copy > have) copy = have;
if (copy > left) copy = left;
zmemcpy(put, next, copy);
have -= copy;
next += copy;
left -= copy;
put += copy;
state->length -= copy;
}
Tracev((stderr, "inflate: stored end\n"));
state->mode = TYPE;
break;
case TABLE:
/* get dynamic table entries descriptor */
NEEDBITS(14);
state->nlen = BITS(5) + 257;
DROPBITS(5);
state->ndist = BITS(5) + 1;
DROPBITS(5);
state->ncode = BITS(4) + 4;
DROPBITS(4);
#ifndef PKZIP_BUG_WORKAROUND
if (state->nlen > 286 || state->ndist > 30) {
strm->msg = (char *)"too many length or distance symbols";
state->mode = BAD;
break;
}
#endif
Tracev((stderr, "inflate: table sizes ok\n"));
/* get code length code lengths (not a typo) */
state->have = 0;
while (state->have < state->ncode) {
NEEDBITS(3);
state->lens[order[state->have++]] = (unsigned short)BITS(3);
DROPBITS(3);
}
while (state->have < 19)
state->lens[order[state->have++]] = 0;
state->next = state->codes;
state->lencode = (code const FAR *)(state->next);
state->lenbits = 7;
ret = inflate_table(CODES, state->lens, 19, &(state->next),
&(state->lenbits), state->work);
if (ret) {
strm->msg = (char *)"invalid code lengths set";
state->mode = BAD;
break;
}
Tracev((stderr, "inflate: code lengths ok\n"));
/* get length and distance code code lengths */
state->have = 0;
while (state->have < state->nlen + state->ndist) {
for (;;) {
This = state->lencode[BITS(state->lenbits)];
if ((unsigned)(This.bits) <= bits) break;
PULLBYTE();
}
if (This.val < 16) {
NEEDBITS(This.bits);
DROPBITS(This.bits);
state->lens[state->have++] = This.val;
}
else {
if (This.val == 16) {
NEEDBITS(This.bits + 2);
DROPBITS(This.bits);
if (state->have == 0) {
strm->msg = (char *)"invalid bit length repeat";
state->mode = BAD;
break;
}
len = (unsigned)(state->lens[state->have - 1]);
copy = 3 + BITS(2);
DROPBITS(2);
}
else if (This.val == 17) {
NEEDBITS(This.bits + 3);
DROPBITS(This.bits);
len = 0;
copy = 3 + BITS(3);
DROPBITS(3);
}
else {
NEEDBITS(This.bits + 7);
DROPBITS(This.bits);
len = 0;
copy = 11 + BITS(7);
DROPBITS(7);
}
if (state->have + copy > state->nlen + state->ndist) {
strm->msg = (char *)"invalid bit length repeat";
state->mode = BAD;
break;
}
while (copy--)
state->lens[state->have++] = (unsigned short)len;
}
}
/* handle error breaks in while */
if (state->mode == BAD) break;
/* build code tables */
state->next = state->codes;
state->lencode = (code const FAR *)(state->next);
state->lenbits = 9;
ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
&(state->lenbits), state->work);
if (ret) {
strm->msg = (char *)"invalid literal/lengths set";
state->mode = BAD;
break;
}
state->distcode = (code const FAR *)(state->next);
state->distbits = 6;
ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
&(state->next), &(state->distbits), state->work);
if (ret) {
strm->msg = (char *)"invalid distances set";
state->mode = BAD;
break;
}
Tracev((stderr, "inflate: codes ok\n"));
state->mode = LEN;
case LEN:
/* use inflate_fast() if we have enough input and output */
if (have >= 6 && left >= 258) {
RESTORE();
if (state->whave < state->wsize)
state->whave = state->wsize - left;
inflate_fast(strm, state->wsize);
LOAD();
break;
}
/* get a literal, length, or end-of-block code */
for (;;) {
This = state->lencode[BITS(state->lenbits)];
if ((unsigned)(This.bits) <= bits) break;
PULLBYTE();
}
if (This.op && (This.op & 0xf0) == 0) {
last = This;
for (;;) {
This = state->lencode[last.val +
(BITS(last.bits + last.op) >> last.bits)];
if ((unsigned)(last.bits + This.bits) <= bits) break;
PULLBYTE();
}
DROPBITS(last.bits);
}
DROPBITS(This.bits);
state->length = (unsigned)This.val;
/* process literal */
if (This.op == 0) {
Tracevv((stderr, This.val >= 0x20 && This.val < 0x7f ?
"inflate: literal '%c'\n" :
"inflate: literal 0x%02x\n", This.val));
ROOM();
*put++ = (unsigned char)(state->length);
left--;
state->mode = LEN;
break;
}
/* process end of block */
if (This.op & 32) {
Tracevv((stderr, "inflate: end of block\n"));
state->mode = TYPE;
break;
}
/* invalid code */
if (This.op & 64) {
strm->msg = (char *)"invalid literal/length code";
state->mode = BAD;
break;
}
/* length code -- get extra bits, if any */
state->extra = (unsigned)(This.op) & 15;
if (state->extra != 0) {
NEEDBITS(state->extra);
state->length += BITS(state->extra);
DROPBITS(state->extra);
}
Tracevv((stderr, "inflate: length %u\n", state->length));
/* get distance code */
for (;;) {
This = state->distcode[BITS(state->distbits)];
if ((unsigned)(This.bits) <= bits) break;
PULLBYTE();
}
if ((This.op & 0xf0) == 0) {
last = This;
for (;;) {
This = state->distcode[last.val +
(BITS(last.bits + last.op) >> last.bits)];
if ((unsigned)(last.bits + This.bits) <= bits) break;
PULLBYTE();
}
DROPBITS(last.bits);
}
DROPBITS(This.bits);
if (This.op & 64) {
strm->msg = (char *)"invalid distance code";
state->mode = BAD;
break;
}
state->offset = (unsigned)This.val;
/* get distance extra bits, if any */
state->extra = (unsigned)(This.op) & 15;
if (state->extra != 0) {
NEEDBITS(state->extra);
state->offset += BITS(state->extra);
DROPBITS(state->extra);
}
if (state->offset > state->wsize - (state->whave < state->wsize ?
left : 0)) {
strm->msg = (char *)"invalid distance too far back";
state->mode = BAD;
break;
}
Tracevv((stderr, "inflate: distance %u\n", state->offset));
/* copy match from window to output */
do {
ROOM();
copy = state->wsize - state->offset;
if (copy < left) {
from = put + copy;
copy = left - copy;
}
else {
from = put - state->offset;
copy = left;
}
if (copy > state->length) copy = state->length;
state->length -= copy;
left -= copy;
do {
*put++ = *from++;
} while (--copy);
} while (state->length != 0);
break;
case DONE:
/* inflate stream terminated properly -- write leftover output */
ret = Z_STREAM_END;
if (left < state->wsize) {
if (out(out_desc, state->window, state->wsize - left))
ret = Z_BUF_ERROR;
}
goto inf_leave;
case BAD:
ret = Z_DATA_ERROR;
goto inf_leave;
default: /* can't happen, but makes compilers happy */
ret = Z_STREAM_ERROR;
goto inf_leave;
}
/* Return unused input */
inf_leave:
strm->next_in = next;
strm->avail_in = have;
return ret;
}
int ZEXPORT inflateBackEnd(z_streamp strm)
{
if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
return Z_STREAM_ERROR;
ZFREE(strm, strm->state);
strm->state = Z_NULL;
Tracev((stderr, "inflate: end\n"));
return Z_OK;
}

316
src/zlib/inffast.c Normal file
View File

@ -0,0 +1,316 @@
/* inffast.c -- fast decoding
* Copyright (C) 1995-2004 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
#include "zutil.h"
#include "inftrees.h"
#include "inflate.h"
#include "inffast.h"
#ifndef ASMINF
/* Allow machine dependent optimization for post-increment or pre-increment.
Based on testing to date,
Pre-increment preferred for:
- PowerPC G3 (Adler)
- MIPS R5000 (Randers-Pehrson)
Post-increment preferred for:
- none
No measurable difference:
- Pentium III (Anderson)
- M68060 (Nikl)
*/
#ifdef POSTINC
# define OFF 0
# define PUP(a) *(a)++
#else
# define OFF 1
# define PUP(a) *++(a)
#endif
/*
Decode literal, length, and distance codes and write out the resulting
literal and match bytes until either not enough input or output is
available, an end-of-block is encountered, or a data error is encountered.
When large enough input and output buffers are supplied to inflate(), for
example, a 16K input buffer and a 64K output buffer, more than 95% of the
inflate execution time is spent in this routine.
Entry assumptions:
state->mode == LEN
strm->avail_in >= 6
strm->avail_out >= 258
start >= strm->avail_out
state->bits < 8
On return, state->mode is one of:
LEN -- ran out of enough output space or enough available input
TYPE -- reached end of block code, inflate() to interpret next block
BAD -- error in block data
Notes:
- The maximum input bits used by a length/distance pair is 15 bits for the
length code, 5 bits for the length extra, 15 bits for the distance code,
and 13 bits for the distance extra. This totals 48 bits, or six bytes.
Therefore if strm->avail_in >= 6, then there is enough input to avoid
checking for available input while decoding.
- The maximum bytes that a single length/distance pair can output is 258
bytes, which is the maximum length that can be coded. inflate_fast()
requires strm->avail_out >= 258 for each loop to avoid checking for
output space.
*/
void inflate_fast(z_streamp strm, unsigned start)
{
struct inflate_state FAR *state;
unsigned char FAR *in; /* local strm->next_in */
unsigned char FAR *last; /* while in < last, enough input available */
unsigned char FAR *out; /* local strm->next_out */
unsigned char FAR *beg; /* inflate()'s initial strm->next_out */
unsigned char FAR *end; /* while out < end, enough space available */
#ifdef INFLATE_STRICT
unsigned dmax; /* maximum distance from zlib header */
#endif
unsigned wsize; /* window size or zero if not using window */
unsigned whave; /* valid bytes in the window */
unsigned write; /* window write index */
unsigned char FAR *window; /* allocated sliding window, if wsize != 0 */
unsigned long hold; /* local strm->hold */
unsigned bits; /* local strm->bits */
code const FAR *lcode; /* local strm->lencode */
code const FAR *dcode; /* local strm->distcode */
unsigned lmask; /* mask for first level of length codes */
unsigned dmask; /* mask for first level of distance codes */
code This; /* retrieved table entry */
unsigned op; /* code bits, operation, extra bits, or */
/* window position, window bytes to copy */
unsigned len; /* match length, unused bytes */
unsigned dist; /* match distance */
unsigned char FAR *from; /* where to copy match from */
/* copy state to local variables */
state = (struct inflate_state FAR *)strm->state;
in = strm->next_in - OFF;
last = in + (strm->avail_in - 5);
out = strm->next_out - OFF;
beg = out - (start - strm->avail_out);
end = out + (strm->avail_out - 257);
#ifdef INFLATE_STRICT
dmax = state->dmax;
#endif
wsize = state->wsize;
whave = state->whave;
write = state->write;
window = state->window;
hold = state->hold;
bits = state->bits;
lcode = state->lencode;
dcode = state->distcode;
lmask = (1U << state->lenbits) - 1;
dmask = (1U << state->distbits) - 1;
/* decode literals and length/distances until end-of-block or not enough
input data or output space */
do {
if (bits < 15) {
hold += (unsigned long)(PUP(in)) << bits;
bits += 8;
hold += (unsigned long)(PUP(in)) << bits;
bits += 8;
}
This = lcode[hold & lmask];
dolen:
op = (unsigned)(This.bits);
hold >>= op;
bits -= op;
op = (unsigned)(This.op);
if (op == 0) { /* literal */
Tracevv((stderr, This.val >= 0x20 && This.val < 0x7f ?
"inflate: literal '%c'\n" :
"inflate: literal 0x%02x\n", This.val));
PUP(out) = (unsigned char)(This.val);
}
else if (op & 16) { /* length base */
len = (unsigned)(This.val);
op &= 15; /* number of extra bits */
if (op) {
if (bits < op) {
hold += (unsigned long)(PUP(in)) << bits;
bits += 8;
}
len += (unsigned)hold & ((1U << op) - 1);
hold >>= op;
bits -= op;
}
Tracevv((stderr, "inflate: length %u\n", len));
if (bits < 15) {
hold += (unsigned long)(PUP(in)) << bits;
bits += 8;
hold += (unsigned long)(PUP(in)) << bits;
bits += 8;
}
This = dcode[hold & dmask];
dodist:
op = (unsigned)(This.bits);
hold >>= op;
bits -= op;
op = (unsigned)(This.op);
if (op & 16) { /* distance base */
dist = (unsigned)(This.val);
op &= 15; /* number of extra bits */
if (bits < op) {
hold += (unsigned long)(PUP(in)) << bits;
bits += 8;
if (bits < op) {
hold += (unsigned long)(PUP(in)) << bits;
bits += 8;
}
}
dist += (unsigned)hold & ((1U << op) - 1);
#ifdef INFLATE_STRICT
if (dist > dmax) {
strm->msg = (char *)"invalid distance too far back";
state->mode = BAD;
break;
}
#endif
hold >>= op;
bits -= op;
Tracevv((stderr, "inflate: distance %u\n", dist));
op = (unsigned)(out - beg); /* max distance in output */
if (dist > op) { /* see if copy from window */
op = dist - op; /* distance back in window */
if (op > whave) {
strm->msg = (char *)"invalid distance too far back";
state->mode = BAD;
break;
}
from = window - OFF;
if (write == 0) { /* very common case */
from += wsize - op;
if (op < len) { /* some from window */
len -= op;
do {
PUP(out) = PUP(from);
} while (--op);
from = out - dist; /* rest from output */
}
}
else if (write < op) { /* wrap around window */
from += wsize + write - op;
op -= write;
if (op < len) { /* some from end of window */
len -= op;
do {
PUP(out) = PUP(from);
} while (--op);
from = window - OFF;
if (write < len) { /* some from start of window */
op = write;
len -= op;
do {
PUP(out) = PUP(from);
} while (--op);
from = out - dist; /* rest from output */
}
}
}
else { /* contiguous in window */
from += write - op;
if (op < len) { /* some from window */
len -= op;
do {
PUP(out) = PUP(from);
} while (--op);
from = out - dist; /* rest from output */
}
}
while (len > 2) {
PUP(out) = PUP(from);
PUP(out) = PUP(from);
PUP(out) = PUP(from);
len -= 3;
}
if (len) {
PUP(out) = PUP(from);
if (len > 1)
PUP(out) = PUP(from);
}
}
else {
from = out - dist; /* copy direct from output */
do { /* minimum length is three */
PUP(out) = PUP(from);
PUP(out) = PUP(from);
PUP(out) = PUP(from);
len -= 3;
} while (len > 2);
if (len) {
PUP(out) = PUP(from);
if (len > 1)
PUP(out) = PUP(from);
}
}
}
else if ((op & 64) == 0) { /* 2nd level distance code */
This = dcode[This.val + (hold & ((1U << op) - 1))];
goto dodist;
}
else {
strm->msg = (char *)"invalid distance code";
state->mode = BAD;
break;
}
}
else if ((op & 64) == 0) { /* 2nd level length code */
This = lcode[This.val + (hold & ((1U << op) - 1))];
goto dolen;
}
else if (op & 32) { /* end-of-block */
Tracevv((stderr, "inflate: end of block\n"));
state->mode = TYPE;
break;
}
else {
strm->msg = (char *)"invalid literal/length code";
state->mode = BAD;
break;
}
} while (in < last && out < end);
/* return unused bytes (on entry, bits < 8, so in won't go too far back) */
len = bits >> 3;
in -= len;
bits -= len << 3;
hold &= (1U << bits) - 1;
/* update state and return */
strm->next_in = in + OFF;
strm->next_out = out + OFF;
strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last));
strm->avail_out = (unsigned)(out < end ?
257 + (end - out) : 257 - (out - end));
state->hold = hold;
state->bits = bits;
return;
}
/*
inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe):
- Using bit fields for code structure
- Different op definition to avoid & for extra bits (do & for table bits)
- Three separate decoding do-loops for direct, window, and write == 0
- Special case for distance > 1 copies to do overlapped load and store copy
- Explicit branch predictions (based on measured branch probabilities)
- Deferring match copy and interspersed it with decoding subsequent codes
- Swapping literal/length else
- Swapping window/direct else
- Larger unrolled copy loops (three is about right)
- Moving len -= 3 statement into middle of loop
*/
#endif /* !ASMINF */

11
src/zlib/inffast.h Normal file
View File

@ -0,0 +1,11 @@
/* inffast.h -- header to use inffast.c
* Copyright (C) 1995-2003 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/* WARNING: this file should *not* be used by applications. It is
part of the implementation of the compression library and is
subject to change. Applications should only use zlib.h.
*/
void inflate_fast OF((z_streamp strm, unsigned start));

94
src/zlib/inffixed.h Normal file
View File

@ -0,0 +1,94 @@
/* inffixed.h -- table for decoding fixed codes
* Generated automatically by makefixed().
*/
/* WARNING: this file should *not* be used by applications. It
is part of the implementation of the compression library and
is subject to change. Applications should only use zlib.h.
*/
static const code lenfix[512] = {
{96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48},
{0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128},
{0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59},
{0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176},
{0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20},
{21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100},
{0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8},
{0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216},
{18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76},
{0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114},
{0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2},
{0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148},
{20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42},
{0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86},
{0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15},
{0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236},
{16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62},
{0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142},
{0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31},
{0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162},
{0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25},
{0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105},
{0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4},
{0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202},
{17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69},
{0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125},
{0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13},
{0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195},
{19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35},
{0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91},
{0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19},
{0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246},
{16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55},
{0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135},
{0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99},
{0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190},
{0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16},
{20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96},
{0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6},
{0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209},
{17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72},
{0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116},
{0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4},
{0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153},
{20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44},
{0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82},
{0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11},
{0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229},
{16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58},
{0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138},
{0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51},
{0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173},
{0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30},
{0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110},
{0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0},
{0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195},
{16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65},
{0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121},
{0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9},
{0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258},
{19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37},
{0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93},
{0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23},
{0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251},
{16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51},
{0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131},
{0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67},
{0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183},
{0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23},
{64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103},
{0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9},
{0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223},
{18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79},
{0,9,255}
};
static const code distfix[32] = {
{16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025},
{21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193},
{18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385},
{19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577},
{16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073},
{22,5,193},{64,5,0}
};

1339
src/zlib/inflate.c Normal file

File diff suppressed because it is too large Load Diff

115
src/zlib/inflate.h Normal file
View File

@ -0,0 +1,115 @@
/* inflate.h -- internal inflate state definition
* Copyright (C) 1995-2004 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/* WARNING: this file should *not* be used by applications. It is
part of the implementation of the compression library and is
subject to change. Applications should only use zlib.h.
*/
/* define NO_GZIP when compiling if you want to disable gzip header and
trailer decoding by inflate(). NO_GZIP would be used to avoid linking in
the crc code when it is not needed. For shared libraries, gzip decoding
should be left enabled. */
#ifndef NO_GZIP
# define GUNZIP
#endif
/* Possible inflate modes between inflate() calls */
typedef enum {
HEAD, /* i: waiting for magic header */
FLAGS, /* i: waiting for method and flags (gzip) */
TIME, /* i: waiting for modification time (gzip) */
OS, /* i: waiting for extra flags and operating system (gzip) */
EXLEN, /* i: waiting for extra length (gzip) */
EXTRA, /* i: waiting for extra bytes (gzip) */
NAME, /* i: waiting for end of file name (gzip) */
COMMENT, /* i: waiting for end of comment (gzip) */
HCRC, /* i: waiting for header crc (gzip) */
DICTID, /* i: waiting for dictionary check value */
DICT, /* waiting for inflateSetDictionary() call */
TYPE, /* i: waiting for type bits, including last-flag bit */
TYPEDO, /* i: same, but skip check to exit inflate on new block */
STORED, /* i: waiting for stored size (length and complement) */
COPY, /* i/o: waiting for input or output to copy stored block */
TABLE, /* i: waiting for dynamic block table lengths */
LENLENS, /* i: waiting for code length code lengths */
CODELENS, /* i: waiting for length/lit and distance code lengths */
LEN, /* i: waiting for length/lit code */
LENEXT, /* i: waiting for length extra bits */
DIST, /* i: waiting for distance code */
DISTEXT, /* i: waiting for distance extra bits */
MATCH, /* o: waiting for output space to copy string */
LIT, /* o: waiting for output space to write literal */
CHECK, /* i: waiting for 32-bit check value */
LENGTH, /* i: waiting for 32-bit length (gzip) */
DONE, /* finished check, done -- remain here until reset */
BAD, /* got a data error -- remain here until reset */
MEM, /* got an inflate() memory error -- remain here until reset */
SYNC /* looking for synchronization bytes to restart inflate() */
} inflate_mode;
/*
State transitions between above modes -
(most modes can go to the BAD or MEM mode -- not shown for clarity)
Process header:
HEAD -> (gzip) or (zlib)
(gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME
NAME -> COMMENT -> HCRC -> TYPE
(zlib) -> DICTID or TYPE
DICTID -> DICT -> TYPE
Read deflate blocks:
TYPE -> STORED or TABLE or LEN or CHECK
STORED -> COPY -> TYPE
TABLE -> LENLENS -> CODELENS -> LEN
Read deflate codes:
LEN -> LENEXT or LIT or TYPE
LENEXT -> DIST -> DISTEXT -> MATCH -> LEN
LIT -> LEN
Process trailer:
CHECK -> LENGTH -> DONE
*/
/* state maintained between inflate() calls. Approximately 7K bytes. */
struct inflate_state {
inflate_mode mode; /* current inflate mode */
int last; /* true if processing last block */
int wrap; /* bit 0 true for zlib, bit 1 true for gzip */
int havedict; /* true if dictionary provided */
int flags; /* gzip header method and flags (0 if zlib) */
unsigned dmax; /* zlib header max distance (INFLATE_STRICT) */
unsigned long check; /* protected copy of check value */
unsigned long total; /* protected copy of output count */
gz_headerp head; /* where to save gzip header information */
/* sliding window */
unsigned wbits; /* log base 2 of requested window size */
unsigned wsize; /* window size or zero if not using window */
unsigned whave; /* valid bytes in the window */
unsigned write; /* window write index */
unsigned char FAR *window; /* allocated sliding window, if needed */
/* bit accumulator */
unsigned long hold; /* input bit accumulator */
unsigned bits; /* number of bits in "in" */
/* for string and stored block copying */
unsigned length; /* literal or length of data to copy */
unsigned offset; /* distance back to copy string from */
/* for table and code decoding */
unsigned extra; /* extra bits needed */
/* fixed and dynamic code tables */
code const FAR *lencode; /* starting table for length/literal codes */
code const FAR *distcode; /* starting table for distance codes */
unsigned lenbits; /* index bits for lencode */
unsigned distbits; /* index bits for distcode */
/* dynamic table building */
unsigned ncode; /* number of code length code lengths */
unsigned nlen; /* number of length code lengths */
unsigned ndist; /* number of distance code lengths */
unsigned have; /* number of code lengths in lens[] */
code FAR *next; /* next available space in codes[] */
unsigned short lens[320]; /* temporary storage for code lengths */
unsigned short work[288]; /* work area for code table building */
code codes[ENOUGH]; /* space for code tables */
};

324
src/zlib/inftrees.c Normal file
View File

@ -0,0 +1,324 @@
/* inftrees.c -- generate Huffman trees for efficient decoding
* Copyright (C) 1995-2005 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
#include "zutil.h"
#include "inftrees.h"
#define MAXBITS 15
const char inflate_copyright[] =
" inflate 1.2.3 Copyright 1995-2005 Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
include such an acknowledgment, I would appreciate that you keep this
copyright string in the executable of your product.
*/
/*
Build a set of tables to decode the provided canonical Huffman code.
The code lengths are lens[0..codes-1]. The result starts at *table,
whose indices are 0..2^bits-1. work is a writable array of at least
lens shorts, which is used as a work area. type is the type of code
to be generated, CODES, LENS, or DISTS. On return, zero is success,
-1 is an invalid code, and +1 means that ENOUGH isn't enough. table
on return points to the next available entry's address. bits is the
requested root table index bits, and on return it is the actual root
table index bits. It will differ if the request is greater than the
longest code or if it is less than the shortest code.
*/
int inflate_table(codetype type, unsigned short FAR *lens, unsigned codes,
code FAR * FAR *table, unsigned FAR *bits, unsigned short FAR *work)
{
unsigned len; /* a code's length in bits */
unsigned sym; /* index of code symbols */
unsigned min, max; /* minimum and maximum code lengths */
unsigned root; /* number of index bits for root table */
unsigned curr; /* number of index bits for current table */
unsigned drop; /* code bits to drop for sub-table */
int left; /* number of prefix codes available */
unsigned used; /* code entries in table used */
unsigned huff; /* Huffman code */
unsigned incr; /* for incrementing code, index */
unsigned fill; /* index for replicating entries */
unsigned low; /* low bits for current root entry */
unsigned mask; /* mask for low root bits */
code This; /* table entry for duplication */
code FAR *next; /* next available space in table */
const unsigned short FAR *base; /* base value table to use */
const unsigned short FAR *extra; /* extra bits table to use */
int end; /* use base and extra for symbol > end */
unsigned short count[MAXBITS+1]; /* number of codes of each length */
unsigned short offs[MAXBITS+1]; /* offsets in table for each length */
static const unsigned short lbase[31] = { /* Length codes 257..285 base */
3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
static const unsigned short lext[31] = { /* Length codes 257..285 extra */
16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 201, 196};
static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
8193, 12289, 16385, 24577, 0, 0};
static const unsigned short dext[32] = { /* Distance codes 0..29 extra */
16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22,
23, 23, 24, 24, 25, 25, 26, 26, 27, 27,
28, 28, 29, 29, 64, 64};
/*
Process a set of code lengths to create a canonical Huffman code. The
code lengths are lens[0..codes-1]. Each length corresponds to the
symbols 0..codes-1. The Huffman code is generated by first sorting the
symbols by length from short to long, and retaining the symbol order
for codes with equal lengths. Then the code starts with all zero bits
for the first code of the shortest length, and the codes are integer
increments for the same length, and zeros are appended as the length
increases. For the deflate format, these bits are stored backwards
from their more natural integer increment ordering, and so when the
decoding tables are built in the large loop below, the integer codes
are incremented backwards.
This routine assumes, but does not check, that all of the entries in
lens[] are in the range 0..MAXBITS. The caller must assure This.
1..MAXBITS is interpreted as that code length. zero means that that
symbol does not occur in This code.
The codes are sorted by computing a count of codes for each length,
creating from that a table of starting indices for each length in the
sorted table, and then entering the symbols in order in the sorted
table. The sorted table is work[], with that space being provided by
the caller.
The length counts are used for other purposes as well, i.e. finding
the minimum and maximum length codes, determining if there are any
codes at all, checking for a valid set of lengths, and looking ahead
at length counts to determine sub-table sizes when building the
decoding tables.
*/
/* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */
for (len = 0; len <= MAXBITS; len++)
count[len] = 0;
for (sym = 0; sym < codes; sym++)
count[lens[sym]]++;
/* bound code lengths, force root to be within code lengths */
root = *bits;
for (max = MAXBITS; max >= 1; max--)
if (count[max] != 0) break;
if (root > max) root = max;
if (max == 0) { /* no symbols to code at all */
This.op = (unsigned char)64; /* invalid code marker */
This.bits = (unsigned char)1;
This.val = (unsigned short)0;
*(*table)++ = This; /* make a table to force an error */
*(*table)++ = This;
*bits = 1;
return 0; /* no symbols, but wait for decoding to report error */
}
for (min = 1; min <= MAXBITS; min++)
if (count[min] != 0) break;
if (root < min) root = min;
/* check for an over-subscribed or incomplete set of lengths */
left = 1;
for (len = 1; len <= MAXBITS; len++) {
left <<= 1;
left -= count[len];
if (left < 0) return -1; /* over-subscribed */
}
if (left > 0 && (type == CODES || max != 1))
return -1; /* incomplete set */
/* generate offsets into symbol table for each length for sorting */
offs[1] = 0;
for (len = 1; len < MAXBITS; len++)
offs[len + 1] = offs[len] + count[len];
/* sort symbols by length, by symbol order within each length */
for (sym = 0; sym < codes; sym++)
if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym;
/*
Create and fill in decoding tables. In This loop, the table being
filled is at next and has curr index bits. The code being used is huff
with length len. That code is converted to an index by dropping drop
bits off of the bottom. For codes where len is less than drop + curr,
those top drop + curr - len bits are incremented through all values to
fill the table with replicated entries.
root is the number of index bits for the root table. When len exceeds
root, sub-tables are created pointed to by the root entry with an index
of the low root bits of huff. This is saved in low to check for when a
new sub-table should be started. drop is zero when the root table is
being filled, and drop is root when sub-tables are being filled.
When a new sub-table is needed, it is necessary to look ahead in the
code lengths to determine what size sub-table is needed. The length
counts are used for This, and so count[] is decremented as codes are
entered in the tables.
used keeps track of how many table entries have been allocated from the
provided *table space. It is checked when a LENS table is being made
against the space in *table, ENOUGH, minus the maximum space needed by
the worst case distance code, MAXD. This should never happen, but the
sufficiency of ENOUGH has not been proven exhaustively, hence the check.
This assumes that when type == LENS, bits == 9.
sym increments through all symbols, and the loop terminates when
all codes of length max, i.e. all codes, have been processed. This
routine permits incomplete codes, so another loop after This one fills
in the rest of the decoding tables with invalid code markers.
*/
/* set up for code type */
switch (type) {
case CODES:
base = extra = work; /* dummy value--not used */
end = 19;
break;
case LENS:
base = lbase;
base -= 257;
extra = lext;
extra -= 257;
end = 256;
break;
default: /* DISTS */
base = dbase;
extra = dext;
end = -1;
}
/* initialize state for loop */
huff = 0; /* starting code */
sym = 0; /* starting code symbol */
len = min; /* starting code length */
next = *table; /* current table to fill in */
curr = root; /* current table index bits */
drop = 0; /* current bits to drop from code for index */
low = (unsigned)(-1); /* trigger new sub-table when len > root */
used = 1U << root; /* use root table entries */
mask = used - 1; /* mask for comparing low */
/* check available table space */
if (type == LENS && used >= ENOUGH - MAXD)
return 1;
/* process all codes and make table entries */
for (;;) {
/* create table entry */
This.bits = (unsigned char)(len - drop);
if ((int)(work[sym]) < end) {
This.op = (unsigned char)0;
This.val = work[sym];
}
else if ((int)(work[sym]) > end) {
This.op = (unsigned char)(extra[work[sym]]);
This.val = base[work[sym]];
}
else {
This.op = (unsigned char)(32 + 64); /* end of block */
This.val = 0;
}
/* replicate for those indices with low len bits equal to huff */
incr = 1U << (len - drop);
fill = 1U << curr;
min = fill; /* save offset to next table */
do {
fill -= incr;
next[(huff >> drop) + fill] = This;
} while (fill != 0);
/* backwards increment the len-bit code huff */
incr = 1U << (len - 1);
while (huff & incr)
incr >>= 1;
if (incr != 0) {
huff &= incr - 1;
huff += incr;
}
else
huff = 0;
/* go to next symbol, update count, len */
sym++;
if (--(count[len]) == 0) {
if (len == max) break;
len = lens[work[sym]];
}
/* create new sub-table if needed */
if (len > root && (huff & mask) != low) {
/* if first time, transition to sub-tables */
if (drop == 0)
drop = root;
/* increment past last table */
next += min; /* here min is 1 << curr */
/* determine length of next table */
curr = len - drop;
left = (int)(1 << curr);
while (curr + drop < max) {
left -= count[curr + drop];
if (left <= 0) break;
curr++;
left <<= 1;
}
/* check for enough space */
used += 1U << curr;
if (type == LENS && used >= ENOUGH - MAXD)
return 1;
/* point entry in root table to sub-table */
low = huff & mask;
(*table)[low].op = (unsigned char)curr;
(*table)[low].bits = (unsigned char)root;
(*table)[low].val = (unsigned short)(next - *table);
}
}
/*
Fill in rest of table for incomplete codes. This loop is similar to the
loop above in incrementing huff for table indices. It is assumed that
len is equal to curr + drop, so there is no loop needed to increment
through high index bits. When the current sub-table is filled, the loop
drops back to the root table to fill in any remaining entries there.
*/
This.op = (unsigned char)64; /* invalid code marker */
This.bits = (unsigned char)(len - drop);
This.val = (unsigned short)0;
while (huff != 0) {
/* when done with sub-table, drop back to root table */
if (drop != 0 && (huff & mask) != low) {
drop = 0;
len = root;
next = *table;
This.bits = (unsigned char)len;
}
/* put invalid code marker in table */
next[huff >> drop] = This;
/* backwards increment the len-bit code huff */
incr = 1U << (len - 1);
while (huff & incr)
incr >>= 1;
if (incr != 0) {
huff &= incr - 1;
huff += incr;
}
else
huff = 0;
}
/* set return parameters */
*table += used;
*bits = root;
return 0;
}

55
src/zlib/inftrees.h Normal file
View File

@ -0,0 +1,55 @@
/* inftrees.h -- header to use inftrees.c
* Copyright (C) 1995-2005 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/* WARNING: this file should *not* be used by applications. It is
part of the implementation of the compression library and is
subject to change. Applications should only use zlib.h.
*/
/* Structure for decoding tables. Each entry provides either the
information needed to do the operation requested by the code that
indexed that table entry, or it provides a pointer to another
table that indexes more bits of the code. op indicates whether
the entry is a pointer to another table, a literal, a length or
distance, an end-of-block, or an invalid code. For a table
pointer, the low four bits of op is the number of index bits of
that table. For a length or distance, the low four bits of op
is the number of extra bits to get after the code. bits is
the number of bits in this code or part of the code to drop off
of the bit buffer. val is the actual byte to output in the case
of a literal, the base length or distance, or the offset from
the current table to the next table. Each entry is four bytes. */
typedef struct {
unsigned char op; /* operation, extra bits, table bits */
unsigned char bits; /* bits in this part of the code */
unsigned short val; /* offset in table or code value */
} code;
/* op values as set by inflate_table():
00000000 - literal
0000tttt - table link, tttt != 0 is the number of table index bits
0001eeee - length or distance, eeee is the number of extra bits
01100000 - end of block
01000000 - invalid code
*/
/* Maximum size of dynamic tree. The maximum found in a long but non-
exhaustive search was 1444 code structures (852 for length/literals
and 592 for distances, the latter actually the result of an
exhaustive search). The true maximum is not known, but the value
below is more than safe. */
#define ENOUGH 2048
#define MAXD 592
/* Type of code to build for inftable() */
typedef enum {
CODES,
LENS,
DISTS
} codetype;
extern int inflate_table OF((codetype type, unsigned short FAR *lens,
unsigned codes, code FAR * FAR *table,
unsigned FAR *bits, unsigned short FAR *work));

310
src/zlib/minigzip.c Normal file
View File

@ -0,0 +1,310 @@
/* minigzip.c -- simulate gzip using the zlib compression library
* Copyright (C) 1995-2005 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/*
* minigzip is a minimal implementation of the gzip utility. This is
* only an example of using zlib and isn't meant to replace the
* full-featured gzip. No attempt is made to deal with file systems
* limiting names to 14 or 8+3 characters, etc... Error checking is
* very limited. So use minigzip only for testing; use gzip for the
* real thing. On MSDOS, use only on file names without extension
* or in pipe mode.
*/
/* @(#) $Id$ */
#include <stdio.h>
#include "zlib.h"
#ifdef STDC
# include <string.h>
# include <stdlib.h>
#endif
#ifdef USE_MMAP
# include <sys/types.h>
# include <sys/mman.h>
# include <sys/stat.h>
#endif
#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
# include <fcntl.h>
# include <io.h>
# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
#else
# define SET_BINARY_MODE(file)
#endif
#ifdef VMS
# define unlink delete
# define GZ_SUFFIX "-gz"
#endif
#ifdef RISCOS
# define unlink remove
# define GZ_SUFFIX "-gz"
# define fileno(file) file->__file
#endif
#if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
# include <unix.h> /* for fileno */
#endif
#ifndef WIN32 /* unlink already in stdio.h for WIN32 */
extern int unlink OF((const char *));
#endif
#ifndef GZ_SUFFIX
# define GZ_SUFFIX ".gz"
#endif
#define SUFFIX_LEN (sizeof(GZ_SUFFIX)-1)
#define BUFLEN 16384
#define MAX_NAME_LEN 1024
#ifdef MAXSEG_64K
# define local static
/* Needed for systems with limitation on stack size. */
#else
# define local
#endif
char *prog;
void error OF((const char *msg));
void gz_compress OF((FILE *in, gzFile out));
#ifdef USE_MMAP
int gz_compress_mmap OF((FILE *in, gzFile out));
#endif
void gz_uncompress OF((gzFile in, FILE *out));
void file_compress OF((char *file, char *mode));
void file_uncompress OF((char *file));
int main OF((int argc, char *argv[]));
/* ===========================================================================
* Display error message and exit
*/
void error(const char *msg)
{
fprintf(stderr, "%s: %s\n", prog, msg);
exit(1);
}
/* ===========================================================================
* Compress input to output then close both files.
*/
void gz_compress(FILE *in, gzFile out)
{
local char buf[BUFLEN];
int len;
int err;
#ifdef USE_MMAP
/* Try first compressing with mmap. If mmap fails (minigzip used in a
* pipe), use the normal fread loop.
*/
if (gz_compress_mmap(in, out) == Z_OK) return;
#endif
for (;;) {
len = (int)fread(buf, 1, sizeof(buf), in);
if (ferror(in)) {
perror("fread");
exit(1);
}
if (len == 0) break;
if (gzwrite(out, buf, (unsigned)len) != len) error(gzerror(out, &err));
}
fclose(in);
if (gzclose(out) != Z_OK) error("failed gzclose");
}
#ifdef USE_MMAP /* MMAP version, Miguel Albrecht <malbrech@eso.org> */
/* Try compressing the input file at once using mmap. Return Z_OK if
* if success, Z_ERRNO otherwise.
*/
int gz_compress_mmap(FILE *in, gzFile out)
{
int len;
int err;
int ifd = fileno(in);
caddr_t buf; /* mmap'ed buffer for the entire input file */
off_t buf_len; /* length of the input file */
struct stat sb;
/* Determine the size of the file, needed for mmap: */
if (fstat(ifd, &sb) < 0) return Z_ERRNO;
buf_len = sb.st_size;
if (buf_len <= 0) return Z_ERRNO;
/* Now do the actual mmap: */
buf = mmap((caddr_t) 0, buf_len, PROT_READ, MAP_SHARED, ifd, (off_t)0);
if (buf == (caddr_t)(-1)) return Z_ERRNO;
/* Compress the whole file at once: */
len = gzwrite(out, (char *)buf, (unsigned)buf_len);
if (len != (int)buf_len) error(gzerror(out, &err));
munmap(buf, buf_len);
fclose(in);
if (gzclose(out) != Z_OK) error("failed gzclose");
return Z_OK;
}
#endif /* USE_MMAP */
/* ===========================================================================
* Uncompress input to output then close both files.
*/
void gz_uncompress(gzFile in, FILE *out)
{
local char buf[BUFLEN];
int len;
int err;
for (;;) {
len = gzread(in, buf, sizeof(buf));
if (len < 0) error (gzerror(in, &err));
if (len == 0) break;
if ((int)fwrite(buf, 1, (unsigned)len, out) != len) {
error("failed fwrite");
}
}
if (fclose(out)) error("failed fclose");
if (gzclose(in) != Z_OK) error("failed gzclose");
}
/* ===========================================================================
* Compress the given file: create a corresponding .gz file and remove the
* original.
*/
void file_compress(char *file, char *mode)
{
local char outfile[MAX_NAME_LEN];
FILE *in;
gzFile out;
strcpy(outfile, file);
strcat(outfile, GZ_SUFFIX);
in = fopen(file, "rb");
if (in == NULL) {
perror(file);
exit(1);
}
out = gzopen(outfile, mode);
if (out == NULL) {
fprintf(stderr, "%s: can't gzopen %s\n", prog, outfile);
exit(1);
}
gz_compress(in, out);
unlink(file);
}
/* ===========================================================================
* Uncompress the given file and remove the original.
*/
void file_uncompress(char *file)
{
local char buf[MAX_NAME_LEN];
char *infile, *outfile;
FILE *out;
gzFile in;
uInt len = (uInt)strlen(file);
strcpy(buf, file);
if (len > SUFFIX_LEN && strcmp(file+len-SUFFIX_LEN, GZ_SUFFIX) == 0) {
infile = file;
outfile = buf;
outfile[len-3] = '\0';
} else {
outfile = file;
infile = buf;
strcat(infile, GZ_SUFFIX);
}
in = gzopen(infile, "rb");
if (in == NULL) {
fprintf(stderr, "%s: can't gzopen %s\n", prog, infile);
exit(1);
}
out = fopen(outfile, "wb");
if (out == NULL) {
perror(file);
exit(1);
}
gz_uncompress(in, out);
unlink(infile);
}
/* ===========================================================================
* Usage: minigzip [-d] [-f] [-h] [-r] [-1 to -9] [files...]
* -d : decompress
* -f : compress with Z_FILTERED
* -h : compress with Z_HUFFMAN_ONLY
* -r : compress with Z_RLE
* -1 to -9 : compression level
*/
int main(int argc, char *argv[])
{
int uncompr = 0;
gzFile file;
char outmode[20];
strcpy(outmode, "wb6 ");
prog = argv[0];
argc--, argv++;
while (argc > 0) {
if (strcmp(*argv, "-d") == 0)
uncompr = 1;
else if (strcmp(*argv, "-f") == 0)
outmode[3] = 'f';
else if (strcmp(*argv, "-h") == 0)
outmode[3] = 'h';
else if (strcmp(*argv, "-r") == 0)
outmode[3] = 'R';
else if ((*argv)[0] == '-' && (*argv)[1] >= '1' && (*argv)[1] <= '9' &&
(*argv)[2] == 0)
outmode[2] = (*argv)[1];
else
break;
argc--, argv++;
}
if (outmode[3] == ' ')
outmode[3] = 0;
if (argc == 0) {
SET_BINARY_MODE(stdin);
SET_BINARY_MODE(stdout);
if (uncompr) {
file = gzdopen(fileno(stdin), "rb");
if (file == NULL) error("can't gzdopen stdin");
gz_uncompress(file, stdout);
} else {
file = gzdopen(fileno(stdout), outmode);
if (file == NULL) error("can't gzdopen stdout");
gz_compress(stdin, file);
}
} else {
do {
if (uncompr) {
file_uncompress(*argv);
} else {
file_compress(*argv, outmode);
}
} while (argv++, --argc);
}
return 0;
}

21
src/zlib/module.mk Normal file
View File

@ -0,0 +1,21 @@
MODULE := src/zlib
MODULE_OBJS := \
src/zlib/adler32.o \
src/zlib/compress.o \
src/zlib/crc32.o \
src/zlib/gzio.o \
src/zlib/uncompr.o \
src/zlib/deflate.o \
src/zlib/trees.o \
src/zlib/zutil.o \
src/zlib/inflate.o \
src/zlib/infback.o \
src/zlib/inftrees.o \
src/zlib/inffast.o
MODULE_DIRS += \
src/zlib
# Include common rules
include $(srcdir)/common.rules

125
src/zlib/readme Normal file
View File

@ -0,0 +1,125 @@
ZLIB DATA COMPRESSION LIBRARY
zlib 1.2.3 is a general purpose data compression library. All the code is
thread safe. The data format used by the zlib library is described by RFCs
(Request for Comments) 1950 to 1952 in the files
http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
and rfc1952.txt (gzip format). These documents are also available in other
formats from ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
All functions of the compression library are documented in the file zlib.h
(volunteer to write man pages welcome, contact zlib@gzip.org). A usage example
of the library is given in the file example.c which also tests that the library
is working correctly. Another example is given in the file minigzip.c. The
compression library itself is composed of all source files except example.c and
minigzip.c.
To compile all files and run the test program, follow the instructions given at
the top of Makefile. In short "make test; make install" should work for most
machines. For Unix: "./configure; make test; make install". For MSDOS, use one
of the special makefiles such as Makefile.msc. For VMS, use make_vms.com.
Questions about zlib should be sent to <zlib@gzip.org>, or to Gilles Vollant
<info@winimage.com> for the Windows DLL version. The zlib home page is
http://www.zlib.org or http://www.gzip.org/zlib/ Before reporting a problem,
please check this site to verify that you have the latest version of zlib;
otherwise get the latest version and check whether the problem still exists or
not.
PLEASE read the zlib FAQ http://www.gzip.org/zlib/zlib_faq.html before asking
for help.
Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan. 1997
issue of Dr. Dobb's Journal; a copy of the article is available in
http://dogma.net/markn/articles/zlibtool/zlibtool.htm
The changes made in version 1.2.3 are documented in the file ChangeLog.
Unsupported third party contributions are provided in directory "contrib".
A Java implementation of zlib is available in the Java Development Kit
http://java.sun.com/j2se/1.4.2/docs/api/java/util/zip/package-summary.html
See the zlib home page http://www.zlib.org for details.
A Perl interface to zlib written by Paul Marquess <pmqs@cpan.org> is in the
CPAN (Comprehensive Perl Archive Network) sites
http://www.cpan.org/modules/by-module/Compress/
A Python interface to zlib written by A.M. Kuchling <amk@amk.ca> is
available in Python 1.5 and later versions, see
http://www.python.org/doc/lib/module-zlib.html
A zlib binding for TCL written by Andreas Kupries <a.kupries@westend.com> is
availlable at http://www.oche.de/~akupries/soft/trf/trf_zip.html
An experimental package to read and write files in .zip format, written on top
of zlib by Gilles Vollant <info@winimage.com>, is available in the
contrib/minizip directory of zlib.
Notes for some targets:
- For Windows DLL versions, please see win32/DLL_FAQ.txt
- For 64-bit Irix, deflate.c must be compiled without any optimization. With
-O, one libpng test fails. The test works in 32 bit mode (with the -n32
compiler flag). The compiler bug has been reported to SGI.
- zlib doesn't work with gcc 2.6.3 on a DEC 3000/300LX under OSF/1 2.1 it works
when compiled with cc.
- On Digital Unix 4.0D (formely OSF/1) on AlphaServer, the cc option -std1 is
necessary to get gzprintf working correctly. This is done by configure.
- zlib doesn't work on HP-UX 9.05 with some versions of /bin/cc. It works with
other compilers. Use "make test" to check your compiler.
- gzdopen is not supported on RISCOS, BEOS and by some Mac compilers.
- For PalmOs, see http://palmzlib.sourceforge.net/
- When building a shared, i.e. dynamic library on Mac OS X, the library must be
installed before testing (do "make install" before "make test"), since the
library location is specified in the library.
Acknowledgments:
The deflate format used by zlib was defined by Phil Katz. The deflate
and zlib specifications were written by L. Peter Deutsch. Thanks to all the
people who reported problems and suggested various improvements in zlib;
they are too numerous to cite here.
Copyright notice:
(C) 1995-2004 Jean-loup Gailly and Mark Adler
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages
arising from the use of this software.
Permission is granted to anyone to use this software for any purpose,
including commercial applications, and to alter it and redistribute it
freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented; you must not
claim that you wrote the original software. If you use this software
in a product, an acknowledgment in the product documentation would be
appreciated but is not required.
2. Altered source versions must be plainly marked as such, and must not be
misrepresented as being the original software.
3. This notice may not be removed or altered from any source distribution.
Jean-loup Gailly Mark Adler
jloup@gzip.org madler@alumni.caltech.edu
If you use the zlib library in a product, we would appreciate *not*
receiving lengthy legal documents to sign. The sources are provided
for free but without warranty of any kind. The library has been
entirely written by Jean-loup Gailly and Mark Adler; it does not
include third-party code.
If you redistribute modified sources, we would appreciate that you include
in the file ChangeLog history information documenting your changes. Please
read the FAQ for more information on the distribution of modified source
versions.

1171
src/zlib/trees.c Normal file

File diff suppressed because it is too large Load Diff

128
src/zlib/trees.h Normal file
View File

@ -0,0 +1,128 @@
/* header created automatically with -DGEN_TREES_H */
local const ct_data static_ltree[L_CODES+2] = {
{{ 12},{ 8}}, {{140},{ 8}}, {{ 76},{ 8}}, {{204},{ 8}}, {{ 44},{ 8}},
{{172},{ 8}}, {{108},{ 8}}, {{236},{ 8}}, {{ 28},{ 8}}, {{156},{ 8}},
{{ 92},{ 8}}, {{220},{ 8}}, {{ 60},{ 8}}, {{188},{ 8}}, {{124},{ 8}},
{{252},{ 8}}, {{ 2},{ 8}}, {{130},{ 8}}, {{ 66},{ 8}}, {{194},{ 8}},
{{ 34},{ 8}}, {{162},{ 8}}, {{ 98},{ 8}}, {{226},{ 8}}, {{ 18},{ 8}},
{{146},{ 8}}, {{ 82},{ 8}}, {{210},{ 8}}, {{ 50},{ 8}}, {{178},{ 8}},
{{114},{ 8}}, {{242},{ 8}}, {{ 10},{ 8}}, {{138},{ 8}}, {{ 74},{ 8}},
{{202},{ 8}}, {{ 42},{ 8}}, {{170},{ 8}}, {{106},{ 8}}, {{234},{ 8}},
{{ 26},{ 8}}, {{154},{ 8}}, {{ 90},{ 8}}, {{218},{ 8}}, {{ 58},{ 8}},
{{186},{ 8}}, {{122},{ 8}}, {{250},{ 8}}, {{ 6},{ 8}}, {{134},{ 8}},
{{ 70},{ 8}}, {{198},{ 8}}, {{ 38},{ 8}}, {{166},{ 8}}, {{102},{ 8}},
{{230},{ 8}}, {{ 22},{ 8}}, {{150},{ 8}}, {{ 86},{ 8}}, {{214},{ 8}},
{{ 54},{ 8}}, {{182},{ 8}}, {{118},{ 8}}, {{246},{ 8}}, {{ 14},{ 8}},
{{142},{ 8}}, {{ 78},{ 8}}, {{206},{ 8}}, {{ 46},{ 8}}, {{174},{ 8}},
{{110},{ 8}}, {{238},{ 8}}, {{ 30},{ 8}}, {{158},{ 8}}, {{ 94},{ 8}},
{{222},{ 8}}, {{ 62},{ 8}}, {{190},{ 8}}, {{126},{ 8}}, {{254},{ 8}},
{{ 1},{ 8}}, {{129},{ 8}}, {{ 65},{ 8}}, {{193},{ 8}}, {{ 33},{ 8}},
{{161},{ 8}}, {{ 97},{ 8}}, {{225},{ 8}}, {{ 17},{ 8}}, {{145},{ 8}},
{{ 81},{ 8}}, {{209},{ 8}}, {{ 49},{ 8}}, {{177},{ 8}}, {{113},{ 8}},
{{241},{ 8}}, {{ 9},{ 8}}, {{137},{ 8}}, {{ 73},{ 8}}, {{201},{ 8}},
{{ 41},{ 8}}, {{169},{ 8}}, {{105},{ 8}}, {{233},{ 8}}, {{ 25},{ 8}},
{{153},{ 8}}, {{ 89},{ 8}}, {{217},{ 8}}, {{ 57},{ 8}}, {{185},{ 8}},
{{121},{ 8}}, {{249},{ 8}}, {{ 5},{ 8}}, {{133},{ 8}}, {{ 69},{ 8}},
{{197},{ 8}}, {{ 37},{ 8}}, {{165},{ 8}}, {{101},{ 8}}, {{229},{ 8}},
{{ 21},{ 8}}, {{149},{ 8}}, {{ 85},{ 8}}, {{213},{ 8}}, {{ 53},{ 8}},
{{181},{ 8}}, {{117},{ 8}}, {{245},{ 8}}, {{ 13},{ 8}}, {{141},{ 8}},
{{ 77},{ 8}}, {{205},{ 8}}, {{ 45},{ 8}}, {{173},{ 8}}, {{109},{ 8}},
{{237},{ 8}}, {{ 29},{ 8}}, {{157},{ 8}}, {{ 93},{ 8}}, {{221},{ 8}},
{{ 61},{ 8}}, {{189},{ 8}}, {{125},{ 8}}, {{253},{ 8}}, {{ 19},{ 9}},
{{275},{ 9}}, {{147},{ 9}}, {{403},{ 9}}, {{ 83},{ 9}}, {{339},{ 9}},
{{211},{ 9}}, {{467},{ 9}}, {{ 51},{ 9}}, {{307},{ 9}}, {{179},{ 9}},
{{435},{ 9}}, {{115},{ 9}}, {{371},{ 9}}, {{243},{ 9}}, {{499},{ 9}},
{{ 11},{ 9}}, {{267},{ 9}}, {{139},{ 9}}, {{395},{ 9}}, {{ 75},{ 9}},
{{331},{ 9}}, {{203},{ 9}}, {{459},{ 9}}, {{ 43},{ 9}}, {{299},{ 9}},
{{171},{ 9}}, {{427},{ 9}}, {{107},{ 9}}, {{363},{ 9}}, {{235},{ 9}},
{{491},{ 9}}, {{ 27},{ 9}}, {{283},{ 9}}, {{155},{ 9}}, {{411},{ 9}},
{{ 91},{ 9}}, {{347},{ 9}}, {{219},{ 9}}, {{475},{ 9}}, {{ 59},{ 9}},
{{315},{ 9}}, {{187},{ 9}}, {{443},{ 9}}, {{123},{ 9}}, {{379},{ 9}},
{{251},{ 9}}, {{507},{ 9}}, {{ 7},{ 9}}, {{263},{ 9}}, {{135},{ 9}},
{{391},{ 9}}, {{ 71},{ 9}}, {{327},{ 9}}, {{199},{ 9}}, {{455},{ 9}},
{{ 39},{ 9}}, {{295},{ 9}}, {{167},{ 9}}, {{423},{ 9}}, {{103},{ 9}},
{{359},{ 9}}, {{231},{ 9}}, {{487},{ 9}}, {{ 23},{ 9}}, {{279},{ 9}},
{{151},{ 9}}, {{407},{ 9}}, {{ 87},{ 9}}, {{343},{ 9}}, {{215},{ 9}},
{{471},{ 9}}, {{ 55},{ 9}}, {{311},{ 9}}, {{183},{ 9}}, {{439},{ 9}},
{{119},{ 9}}, {{375},{ 9}}, {{247},{ 9}}, {{503},{ 9}}, {{ 15},{ 9}},
{{271},{ 9}}, {{143},{ 9}}, {{399},{ 9}}, {{ 79},{ 9}}, {{335},{ 9}},
{{207},{ 9}}, {{463},{ 9}}, {{ 47},{ 9}}, {{303},{ 9}}, {{175},{ 9}},
{{431},{ 9}}, {{111},{ 9}}, {{367},{ 9}}, {{239},{ 9}}, {{495},{ 9}},
{{ 31},{ 9}}, {{287},{ 9}}, {{159},{ 9}}, {{415},{ 9}}, {{ 95},{ 9}},
{{351},{ 9}}, {{223},{ 9}}, {{479},{ 9}}, {{ 63},{ 9}}, {{319},{ 9}},
{{191},{ 9}}, {{447},{ 9}}, {{127},{ 9}}, {{383},{ 9}}, {{255},{ 9}},
{{511},{ 9}}, {{ 0},{ 7}}, {{ 64},{ 7}}, {{ 32},{ 7}}, {{ 96},{ 7}},
{{ 16},{ 7}}, {{ 80},{ 7}}, {{ 48},{ 7}}, {{112},{ 7}}, {{ 8},{ 7}},
{{ 72},{ 7}}, {{ 40},{ 7}}, {{104},{ 7}}, {{ 24},{ 7}}, {{ 88},{ 7}},
{{ 56},{ 7}}, {{120},{ 7}}, {{ 4},{ 7}}, {{ 68},{ 7}}, {{ 36},{ 7}},
{{100},{ 7}}, {{ 20},{ 7}}, {{ 84},{ 7}}, {{ 52},{ 7}}, {{116},{ 7}},
{{ 3},{ 8}}, {{131},{ 8}}, {{ 67},{ 8}}, {{195},{ 8}}, {{ 35},{ 8}},
{{163},{ 8}}, {{ 99},{ 8}}, {{227},{ 8}}
};
local const ct_data static_dtree[D_CODES] = {
{{ 0},{ 5}}, {{16},{ 5}}, {{ 8},{ 5}}, {{24},{ 5}}, {{ 4},{ 5}},
{{20},{ 5}}, {{12},{ 5}}, {{28},{ 5}}, {{ 2},{ 5}}, {{18},{ 5}},
{{10},{ 5}}, {{26},{ 5}}, {{ 6},{ 5}}, {{22},{ 5}}, {{14},{ 5}},
{{30},{ 5}}, {{ 1},{ 5}}, {{17},{ 5}}, {{ 9},{ 5}}, {{25},{ 5}},
{{ 5},{ 5}}, {{21},{ 5}}, {{13},{ 5}}, {{29},{ 5}}, {{ 3},{ 5}},
{{19},{ 5}}, {{11},{ 5}}, {{27},{ 5}}, {{ 7},{ 5}}, {{23},{ 5}}
};
const uch _dist_code[DIST_CODE_LEN] = {
0, 1, 2, 3, 4, 4, 5, 5, 6, 6, 6, 6, 7, 7, 7, 7, 8, 8, 8, 8,
8, 8, 8, 8, 9, 9, 9, 9, 9, 9, 9, 9, 10, 10, 10, 10, 10, 10, 10, 10,
10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11,
11, 11, 11, 11, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12,
12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 13, 13, 13, 13,
13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
13, 13, 13, 13, 13, 13, 13, 13, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 15, 15, 15, 15, 15, 15, 15, 15,
15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 0, 0, 16, 17,
18, 18, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 22, 22, 22, 22, 22, 22, 22, 22,
23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
24, 24, 24, 24, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27,
27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
27, 27, 27, 27, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
28, 28, 28, 28, 28, 28, 28, 28, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29
};
const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {
0, 1, 2, 3, 4, 5, 6, 7, 8, 8, 9, 9, 10, 10, 11, 11, 12, 12, 12, 12,
13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16,
17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19,
19, 19, 19, 19, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,
21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 22, 22, 22, 22,
22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 23, 23, 23, 23, 23, 23, 23, 23,
23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 26,
26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 28
};
local const int base_length[LENGTH_CODES] = {
0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 20, 24, 28, 32, 40, 48, 56,
64, 80, 96, 112, 128, 160, 192, 224, 0
};
local const int base_dist[D_CODES] = {
0, 1, 2, 3, 4, 6, 8, 12, 16, 24,
32, 48, 64, 96, 128, 192, 256, 384, 512, 768,
1024, 1536, 2048, 3072, 4096, 6144, 8192, 12288, 16384, 24576
};

58
src/zlib/uncompr.c Normal file
View File

@ -0,0 +1,58 @@
/* uncompr.c -- decompress a memory buffer
* Copyright (C) 1995-2003 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/* @(#) $Id$ */
#define ZLIB_INTERNAL
#include "zlib.h"
/* ===========================================================================
Decompresses the source buffer into the destination buffer. sourceLen is
the byte length of the source buffer. Upon entry, destLen is the total
size of the destination buffer, which must be large enough to hold the
entire uncompressed data. (The size of the uncompressed data must have
been saved previously by the compressor and transmitted to the decompressor
by some mechanism outside the scope of this compression library.)
Upon exit, destLen is the actual size of the compressed buffer.
This function can be used to decompress a whole file at once if the
input file is mmap'ed.
uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
enough memory, Z_BUF_ERROR if there was not enough room in the output
buffer, or Z_DATA_ERROR if the input data was corrupted.
*/
int ZEXPORT uncompress (Bytef *dest, uLongf *destLen,
const Bytef *source, uLong sourceLen)
{
z_stream stream;
int err;
stream.next_in = (Bytef*)source;
stream.avail_in = (uInt)sourceLen;
/* Check for source > 64K on 16-bit machine: */
if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
stream.next_out = dest;
stream.avail_out = (uInt)*destLen;
if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
stream.zalloc = (alloc_func)0;
stream.zfree = (free_func)0;
err = inflateInit(&stream);
if (err != Z_OK) return err;
err = inflate(&stream, Z_FINISH);
if (err != Z_STREAM_END) {
inflateEnd(&stream);
if (err == Z_NEED_DICT || (err == Z_BUF_ERROR && stream.avail_in == 0))
return Z_DATA_ERROR;
return err;
}
*destLen = stream.total_out;
err = inflateEnd(&stream);
return err;
}

332
src/zlib/zconf.h Normal file
View File

@ -0,0 +1,332 @@
/* zconf.h -- configuration of the zlib compression library
* Copyright (C) 1995-2005 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/* @(#) $Id$ */
#ifndef ZCONF_H
#define ZCONF_H
/*
* If you *really* need a unique prefix for all types and library functions,
* compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
*/
#ifdef Z_PREFIX
# define deflateInit_ z_deflateInit_
# define deflate z_deflate
# define deflateEnd z_deflateEnd
# define inflateInit_ z_inflateInit_
# define inflate z_inflate
# define inflateEnd z_inflateEnd
# define deflateInit2_ z_deflateInit2_
# define deflateSetDictionary z_deflateSetDictionary
# define deflateCopy z_deflateCopy
# define deflateReset z_deflateReset
# define deflateParams z_deflateParams
# define deflateBound z_deflateBound
# define deflatePrime z_deflatePrime
# define inflateInit2_ z_inflateInit2_
# define inflateSetDictionary z_inflateSetDictionary
# define inflateSync z_inflateSync
# define inflateSyncPoint z_inflateSyncPoint
# define inflateCopy z_inflateCopy
# define inflateReset z_inflateReset
# define inflateBack z_inflateBack
# define inflateBackEnd z_inflateBackEnd
# define compress z_compress
# define compress2 z_compress2
# define compressBound z_compressBound
# define uncompress z_uncompress
# define adler32 z_adler32
# define crc32 z_crc32
# define get_crc_table z_get_crc_table
# define zError z_zError
# define alloc_func z_alloc_func
# define free_func z_free_func
# define in_func z_in_func
# define out_func z_out_func
# define Byte z_Byte
# define uInt z_uInt
# define uLong z_uLong
# define Bytef z_Bytef
# define charf z_charf
# define intf z_intf
# define uIntf z_uIntf
# define uLongf z_uLongf
# define voidpf z_voidpf
# define voidp z_voidp
#endif
#if defined(__MSDOS__) && !defined(MSDOS)
# define MSDOS
#endif
#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2)
# define OS2
#endif
#if defined(_WINDOWS) && !defined(WINDOWS)
# define WINDOWS
#endif
#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
# ifndef WIN32
# define WIN32
# endif
#endif
#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
# ifndef SYS16BIT
# define SYS16BIT
# endif
# endif
#endif
/*
* Compile with -DMAXSEG_64K if the alloc function cannot allocate more
* than 64k bytes at a time (needed on systems with 16-bit int).
*/
#ifdef SYS16BIT
# define MAXSEG_64K
#endif
#ifdef MSDOS
# define UNALIGNED_OK
#endif
#ifdef __STDC_VERSION__
# ifndef STDC
# define STDC
# endif
# if __STDC_VERSION__ >= 199901L
# ifndef STDC99
# define STDC99
# endif
# endif
#endif
#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus))
# define STDC
#endif
#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__))
# define STDC
#endif
#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32))
# define STDC
#endif
#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__))
# define STDC
#endif
#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */
# define STDC
#endif
#ifndef STDC
# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
# define const /* note: need a more gentle solution here */
# endif
#endif
/* Some Mac compilers merge all .h files incorrectly: */
#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__)
# define NO_DUMMY_DECL
#endif
/* Maximum value for memLevel in deflateInit2 */
#ifndef MAX_MEM_LEVEL
# ifdef MAXSEG_64K
# define MAX_MEM_LEVEL 8
# else
# define MAX_MEM_LEVEL 9
# endif
#endif
/* Maximum value for windowBits in deflateInit2 and inflateInit2.
* WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
* created by gzip. (Files created by minigzip can still be extracted by
* gzip.)
*/
#ifndef MAX_WBITS
# define MAX_WBITS 15 /* 32K LZ77 window */
#endif
/* The memory requirements for deflate are (in bytes):
(1 << (windowBits+2)) + (1 << (memLevel+9))
that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values)
plus a few kilobytes for small objects. For example, if you want to reduce
the default memory requirements from 256K to 128K, compile with
make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
Of course this will generally degrade compression (there's no free lunch).
The memory requirements for inflate are (in bytes) 1 << windowBits
that is, 32K for windowBits=15 (default value) plus a few kilobytes
for small objects.
*/
/* Type declarations */
#ifndef OF /* function prototypes */
# ifdef STDC
# define OF(args) args
# else
# define OF(args) ()
# endif
#endif
/* The following definitions for FAR are needed only for MSDOS mixed
* model programming (small or medium model with some far allocations).
* This was tested only with MSC; for other MSDOS compilers you may have
* to define NO_MEMCPY in zutil.h. If you don't need the mixed model,
* just define FAR to be empty.
*/
#ifdef SYS16BIT
# if defined(M_I86SM) || defined(M_I86MM)
/* MSC small or medium model */
# define SMALL_MEDIUM
# ifdef _MSC_VER
# define FAR _far
# else
# define FAR far
# endif
# endif
# if (defined(__SMALL__) || defined(__MEDIUM__))
/* Turbo C small or medium model */
# define SMALL_MEDIUM
# ifdef __BORLANDC__
# define FAR _far
# else
# define FAR far
# endif
# endif
#endif
#if defined(WINDOWS) || defined(WIN32)
/* If building or using zlib as a DLL, define ZLIB_DLL.
* This is not mandatory, but it offers a little performance increase.
*/
# ifdef ZLIB_DLL
# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500))
# ifdef ZLIB_INTERNAL
# define ZEXTERN extern __declspec(dllexport)
# else
# define ZEXTERN extern __declspec(dllimport)
# endif
# endif
# endif /* ZLIB_DLL */
/* If building or using zlib with the WINAPI/WINAPIV calling convention,
* define ZLIB_WINAPI.
* Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
*/
# ifdef ZLIB_WINAPI
# ifdef FAR
# undef FAR
# endif
# include <windows.h>
/* No need for _export, use ZLIB.DEF instead. */
/* For complete Windows compatibility, use WINAPI, not __stdcall. */
# define ZEXPORT WINAPI
# ifdef WIN32
# define ZEXPORTVA WINAPIV
# else
# define ZEXPORTVA FAR CDECL
# endif
# endif
#endif
#if defined (__BEOS__)
# ifdef ZLIB_DLL
# ifdef ZLIB_INTERNAL
# define ZEXPORT __declspec(dllexport)
# define ZEXPORTVA __declspec(dllexport)
# else
# define ZEXPORT __declspec(dllimport)
# define ZEXPORTVA __declspec(dllimport)
# endif
# endif
#endif
#ifndef ZEXTERN
# define ZEXTERN extern
#endif
#ifndef ZEXPORT
# define ZEXPORT
#endif
#ifndef ZEXPORTVA
# define ZEXPORTVA
#endif
#ifndef FAR
# define FAR
#endif
#if !defined(__MACTYPES__)
typedef unsigned char Byte; /* 8 bits */
#endif
typedef unsigned int uInt; /* 16 bits or more */
typedef unsigned long uLong; /* 32 bits or more */
#ifdef SMALL_MEDIUM
/* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
# define Bytef Byte FAR
#else
typedef Byte FAR Bytef;
#endif
typedef char FAR charf;
typedef int FAR intf;
typedef uInt FAR uIntf;
typedef uLong FAR uLongf;
#ifdef STDC
typedef void const *voidpc;
typedef void FAR *voidpf;
typedef void *voidp;
#else
typedef Byte const *voidpc;
typedef Byte FAR *voidpf;
typedef Byte *voidp;
#endif
#if 0 /* HAVE_UNISTD_H -- this line is updated by ./configure */
# include <sys/types.h> /* for off_t */
# include <unistd.h> /* for SEEK_* and off_t */
# ifdef VMS
# include <unixio.h> /* for off_t */
# endif
# define z_off_t off_t
#endif
#ifndef SEEK_SET
# define SEEK_SET 0 /* Seek from beginning of file. */
# define SEEK_CUR 1 /* Seek from current position. */
# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */
#endif
#ifndef z_off_t
# define z_off_t long
#endif
#if defined(__OS400__)
# define NO_vsnprintf
#endif
#if defined(__MVS__)
# define NO_vsnprintf
# ifdef FAR
# undef FAR
# endif
#endif
/* MVS linker does not support external names larger than 8 bytes */
#if defined(__MVS__)
# pragma map(deflateInit_,"DEIN")
# pragma map(deflateInit2_,"DEIN2")
# pragma map(deflateEnd,"DEEND")
# pragma map(deflateBound,"DEBND")
# pragma map(inflateInit_,"ININ")
# pragma map(inflateInit2_,"ININ2")
# pragma map(inflateEnd,"INEND")
# pragma map(inflateSync,"INSY")
# pragma map(inflateSetDictionary,"INSEDI")
# pragma map(compressBound,"CMBND")
# pragma map(inflate_table,"INTABL")
# pragma map(inflate_fast,"INFA")
# pragma map(inflate_copyright,"INCOPY")
#endif
#endif /* ZCONF_H */

1357
src/zlib/zlib.h Normal file

File diff suppressed because it is too large Load Diff

303
src/zlib/zutil.c Normal file
View File

@ -0,0 +1,303 @@
/* zutil.c -- target dependent utility functions for the compression library
* Copyright (C) 1995-2005 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/* @(#) $Id$ */
#include "zutil.h"
#ifndef NO_DUMMY_DECL
struct internal_state {int dummy;}; /* for buggy compilers */
#endif
const char * const z_errmsg[10] = {
"need dictionary", /* Z_NEED_DICT 2 */
"stream end", /* Z_STREAM_END 1 */
"", /* Z_OK 0 */
"file error", /* Z_ERRNO (-1) */
"stream error", /* Z_STREAM_ERROR (-2) */
"data error", /* Z_DATA_ERROR (-3) */
"insufficient memory", /* Z_MEM_ERROR (-4) */
"buffer error", /* Z_BUF_ERROR (-5) */
"incompatible version",/* Z_VERSION_ERROR (-6) */
""};
const char * ZEXPORT zlibVersion()
{
return ZLIB_VERSION;
}
uLong ZEXPORT zlibCompileFlags()
{
uLong flags;
flags = 0;
switch (sizeof(uInt)) {
case 2: break;
case 4: flags += 1; break;
case 8: flags += 2; break;
default: flags += 3;
}
switch (sizeof(uLong)) {
case 2: break;
case 4: flags += 1 << 2; break;
case 8: flags += 2 << 2; break;
default: flags += 3 << 2;
}
switch (sizeof(voidpf)) {
case 2: break;
case 4: flags += 1 << 4; break;
case 8: flags += 2 << 4; break;
default: flags += 3 << 4;
}
switch (sizeof(z_off_t)) {
case 2: break;
case 4: flags += 1 << 6; break;
case 8: flags += 2 << 6; break;
default: flags += 3 << 6;
}
#ifdef DEBUG
flags += 1 << 8;
#endif
#if defined(ASMV) || defined(ASMINF)
flags += 1 << 9;
#endif
#ifdef ZLIB_WINAPI
flags += 1 << 10;
#endif
#ifdef BUILDFIXED
flags += 1 << 12;
#endif
#ifdef DYNAMIC_CRC_TABLE
flags += 1 << 13;
#endif
#ifdef NO_GZCOMPRESS
flags += 1L << 16;
#endif
#ifdef NO_GZIP
flags += 1L << 17;
#endif
#ifdef PKZIP_BUG_WORKAROUND
flags += 1L << 20;
#endif
#ifdef FASTEST
flags += 1L << 21;
#endif
#ifdef STDC
# ifdef NO_vsnprintf
flags += 1L << 25;
# ifdef HAS_vsprintf_void
flags += 1L << 26;
# endif
# else
# ifdef HAS_vsnprintf_void
flags += 1L << 26;
# endif
# endif
#else
flags += 1L << 24;
# ifdef NO_snprintf
flags += 1L << 25;
# ifdef HAS_sprintf_void
flags += 1L << 26;
# endif
# else
# ifdef HAS_snprintf_void
flags += 1L << 26;
# endif
# endif
#endif
return flags;
}
#ifdef DEBUG
# ifndef verbose
# define verbose 0
# endif
int z_verbose = verbose;
void z_error (char *m)
{
fprintf(stderr, "%s\n", m);
exit(1);
}
#endif
/* exported to allow conversion of error code to string for compress() and
* uncompress()
*/
const char * ZEXPORT zError(int err)
{
return ERR_MSG(err);
}
#if defined(_WIN32_WCE)
/* The Microsoft C Run-Time Library for Windows CE doesn't have
* errno. We define it as a global variable to simplify porting.
* Its value is always 0 and should not be used.
*/
int errno = 0;
#endif
#ifndef HAVE_MEMCPY
void zmemcpy(Bytef* dest, const Bytef* source, uInt len)
{
if (len == 0) return;
do {
*dest++ = *source++; /* ??? to be unrolled */
} while (--len != 0);
}
int zmemcmp(const Bytef* s1, const Bytef* s2, uInt len)
{
uInt j;
for (j = 0; j < len; j++) {
if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1;
}
return 0;
}
void zmemzero(Bytef* dest, uInt len)
{
if (len == 0) return;
do {
*dest++ = 0; /* ??? to be unrolled */
} while (--len != 0);
}
#endif
#ifdef SYS16BIT
#ifdef __TURBOC__
/* Turbo C in 16-bit mode */
# define MY_ZCALLOC
/* Turbo C malloc() does not allow dynamic allocation of 64K bytes
* and farmalloc(64K) returns a pointer with an offset of 8, so we
* must fix the pointer. Warning: the pointer must be put back to its
* original form in order to free it, use zcfree().
*/
#define MAX_PTR 10
/* 10*64K = 640K */
local int next_ptr = 0;
typedef struct ptr_table_s {
voidpf org_ptr;
voidpf new_ptr;
} ptr_table;
local ptr_table table[MAX_PTR];
/* This table is used to remember the original form of pointers
* to large buffers (64K). Such pointers are normalized with a zero offset.
* Since MSDOS is not a preemptive multitasking OS, this table is not
* protected from concurrent access. This hack doesn't work anyway on
* a protected system like OS/2. Use Microsoft C instead.
*/
voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
{
voidpf buf = opaque; /* just to make some compilers happy */
ulg bsize = (ulg)items*size;
/* If we allocate less than 65520 bytes, we assume that farmalloc
* will return a usable pointer which doesn't have to be normalized.
*/
if (bsize < 65520L) {
buf = farmalloc(bsize);
if (*(ush*)&buf != 0) return buf;
} else {
buf = farmalloc(bsize + 16L);
}
if (buf == NULL || next_ptr >= MAX_PTR) return NULL;
table[next_ptr].org_ptr = buf;
/* Normalize the pointer to seg:0 */
*((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4;
*(ush*)&buf = 0;
table[next_ptr++].new_ptr = buf;
return buf;
}
void zcfree (voidpf opaque, voidpf ptr)
{
int n;
if (*(ush*)&ptr != 0) { /* object < 64K */
farfree(ptr);
return;
}
/* Find the original pointer */
for (n = 0; n < next_ptr; n++) {
if (ptr != table[n].new_ptr) continue;
farfree(table[n].org_ptr);
while (++n < next_ptr) {
table[n-1] = table[n];
}
next_ptr--;
return;
}
ptr = opaque; /* just to make some compilers happy */
Assert(0, "zcfree: ptr not found");
}
#endif /* __TURBOC__ */
#ifdef M_I86
/* Microsoft C in 16-bit mode */
# define MY_ZCALLOC
#if (!defined(_MSC_VER) || (_MSC_VER <= 600))
# define _halloc halloc
# define _hfree hfree
#endif
voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
{
if (opaque) opaque = 0; /* to make compiler happy */
return _halloc((long)items, size);
}
void zcfree (voidpf opaque, voidpf ptr)
{
if (opaque) opaque = 0; /* to make compiler happy */
_hfree(ptr);
}
#endif /* M_I86 */
#endif /* SYS16BIT */
#ifndef MY_ZCALLOC /* Any system without a special alloc function */
#ifndef STDC
extern voidp malloc OF((uInt size));
extern voidp calloc OF((uInt items, uInt size));
extern void free OF((voidpf ptr));
#endif
voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
{
if (opaque) items += size - size; /* make compiler happy */
return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) :
(voidpf)calloc(items, size);
}
void zcfree (voidpf opaque, voidpf ptr)
{
free(ptr);
if (opaque) return; /* make compiler happy */
}
#endif /* MY_ZCALLOC */

269
src/zlib/zutil.h Normal file
View File

@ -0,0 +1,269 @@
/* zutil.h -- internal interface and configuration of the compression library
* Copyright (C) 1995-2005 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/* WARNING: this file should *not* be used by applications. It is
part of the implementation of the compression library and is
subject to change. Applications should only use zlib.h.
*/
/* @(#) $Id$ */
#ifndef ZUTIL_H
#define ZUTIL_H
#define ZLIB_INTERNAL
#include "zlib.h"
#ifdef STDC
# ifndef _WIN32_WCE
# include <stddef.h>
# endif
# include <string.h>
# include <stdlib.h>
#endif
#ifdef NO_ERRNO_H
# ifdef _WIN32_WCE
/* The Microsoft C Run-Time Library for Windows CE doesn't have
* errno. We define it as a global variable to simplify porting.
* Its value is always 0 and should not be used. We rename it to
* avoid conflict with other libraries that use the same workaround.
*/
# define errno z_errno
# endif
extern int errno;
#else
# ifndef _WIN32_WCE
# include <errno.h>
# endif
#endif
#ifndef local
# define local static
#endif
/* compile with -Dlocal if your debugger can't find static symbols */
typedef unsigned char uch;
typedef uch FAR uchf;
typedef unsigned short ush;
typedef ush FAR ushf;
typedef unsigned long ulg;
extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
/* (size given to avoid silly warnings with Visual C++) */
#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]
#define ERR_RETURN(strm,err) \
return (strm->msg = (char*)ERR_MSG(err), (err))
/* To be used only when the state is known to be valid */
/* common constants */
#ifndef DEF_WBITS
# define DEF_WBITS MAX_WBITS
#endif
/* default windowBits for decompression. MAX_WBITS is for compression only */
#if MAX_MEM_LEVEL >= 8
# define DEF_MEM_LEVEL 8
#else
# define DEF_MEM_LEVEL MAX_MEM_LEVEL
#endif
/* default memLevel */
#define STORED_BLOCK 0
#define STATIC_TREES 1
#define DYN_TREES 2
/* The three kinds of block type */
#define MIN_MATCH 3
#define MAX_MATCH 258
/* The minimum and maximum match lengths */
#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */
/* target dependencies */
#if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32))
# define OS_CODE 0x00
# if defined(__TURBOC__) || defined(__BORLANDC__)
# if(__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
/* Allow compilation with ANSI keywords only enabled */
void _Cdecl farfree( void *block );
void *_Cdecl farmalloc( unsigned long nbytes );
# else
# include <alloc.h>
# endif
# else /* MSC or DJGPP */
# include <malloc.h>
# endif
#endif
#ifdef AMIGA
# define OS_CODE 0x01
#endif
#if defined(VAXC) || defined(VMS)
# define OS_CODE 0x02
# define F_OPEN(name, mode) \
fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
#endif
#if defined(ATARI) || defined(atarist)
# define OS_CODE 0x05
#endif
#ifdef OS2
# define OS_CODE 0x06
# ifdef M_I86
#include <malloc.h>
# endif
#endif
#if defined(MACOS) || defined(TARGET_OS_MAC)
# define OS_CODE 0x07
# if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
# include <unix.h> /* for fdopen */
# else
# ifndef fdopen
# define fdopen(fd,mode) NULL /* No fdopen() */
# endif
# endif
#endif
#ifdef TOPS20
# define OS_CODE 0x0a
#endif
#ifdef WIN32
# ifndef __CYGWIN__ /* Cygwin is Unix, not Win32 */
# define OS_CODE 0x0b
# endif
#endif
#ifdef __50SERIES /* Prime/PRIMOS */
# define OS_CODE 0x0f
#endif
#if defined(_BEOS_) || defined(RISCOS)
# define fdopen(fd,mode) NULL /* No fdopen() */
#endif
#if (defined(_MSC_VER) && (_MSC_VER > 600))
# if defined(_WIN32_WCE)
# define fdopen(fd,mode) NULL /* No fdopen() */
# ifndef _PTRDIFF_T_DEFINED
typedef int ptrdiff_t;
# define _PTRDIFF_T_DEFINED
# endif
# else
# define fdopen(fd,type) _fdopen(fd,type)
# endif
#endif
/* common defaults */
#ifndef OS_CODE
# define OS_CODE 0x03 /* assume Unix */
#endif
#ifndef F_OPEN
# define F_OPEN(name, mode) fopen((name), (mode))
#endif
/* functions */
#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550)
# ifndef HAVE_VSNPRINTF
# define HAVE_VSNPRINTF
# endif
#endif
#if defined(__CYGWIN__)
# ifndef HAVE_VSNPRINTF
# define HAVE_VSNPRINTF
# endif
#endif
#ifndef HAVE_VSNPRINTF
# ifdef MSDOS
/* vsnprintf may exist on some MS-DOS compilers (DJGPP?),
but for now we just assume it doesn't. */
# define NO_vsnprintf
# endif
# ifdef __TURBOC__
# define NO_vsnprintf
# endif
# ifdef WIN32
/* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */
# if !defined(vsnprintf) && !defined(NO_vsnprintf)
# define vsnprintf _vsnprintf
# endif
# endif
# ifdef __SASC
# define NO_vsnprintf
# endif
#endif
#ifdef VMS
# define NO_vsnprintf
#endif
#if defined(pyr)
# define NO_MEMCPY
#endif
#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__)
/* Use our own functions for small and medium model with MSC <= 5.0.
* You may have to use the same strategy for Borland C (untested).
* The __SC__ check is for Symantec.
*/
# define NO_MEMCPY
#endif
#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY)
# define HAVE_MEMCPY
#endif
#ifdef HAVE_MEMCPY
# ifdef SMALL_MEDIUM /* MSDOS small or medium model */
# define zmemcpy _fmemcpy
# define zmemcmp _fmemcmp
# define zmemzero(dest, len) _fmemset(dest, 0, len)
# else
# define zmemcpy memcpy
# define zmemcmp memcmp
# define zmemzero(dest, len) memset(dest, 0, len)
# endif
#else
extern void zmemcpy OF((Bytef* dest, const Bytef* source, uInt len));
extern int zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len));
extern void zmemzero OF((Bytef* dest, uInt len));
#endif
/* Diagnostic functions */
#ifdef DEBUG
# include <stdio.h>
extern int z_verbose;
extern void z_error OF((char *m));
# define Assert(cond,msg) {if(!(cond)) z_error(msg);}
# define Trace(x) {if (z_verbose>=0) fprintf x ;}
# define Tracev(x) {if (z_verbose>0) fprintf x ;}
# define Tracevv(x) {if (z_verbose>1) fprintf x ;}
# define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;}
# define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;}
#else
# define Assert(cond,msg)
# define Trace(x)
# define Tracev(x)
# define Tracevv(x)
# define Tracec(c,x)
# define Tracecv(c,x)
#endif
voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size));
void zcfree OF((voidpf opaque, voidpf ptr));
#define ZALLOC(strm, items, size) \
(*((strm)->zalloc))((strm)->opaque, (items), (size))
#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
#define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
#endif /* ZUTIL_H */