Misc: fix EH frame registration (LLVM, non-Windows).
Misc: constant-folding bitcast (cpu_translator).
Misc: add syntax for LLVM arrays (cpu_translator).
Misc: use function names for proper linkage (SPU LLVM).
Changed function search and verification in Giga mode.
Basic stack frame layout analysis.
Function detection in Giga mode.
Basic use of new information in SPU LLVM.
Fixed jump table compilation in SPU LLVM.
Disable broken optimization in Accurate xfloat mode.
Make compiled SPU modules position-independent in SPU LLVM.
Optimizations include but not limited to:
* Compiling SPU functions as native functions when eligible
* Avoiding register context write-out
* Aligned stack assumption (CWD alike instruction)
* Implement both RawSPU and threaded SPU page fault recovery
* Guard page_fault_notification_entries access with a mutex
* Add missing lock in sys_ppu_thread_recover_page_fault/get_page_fault_context
* Fix EINVAL check in sys_ppu_thread_recover_page_fault, previously when the event was not found begin() was erased and
CELL_OK was returned.
* Fixed page fault recovery waiting logic:
- Do not rely on a single thread_ctrl notification (unsafe)
- Avoided a race where ::awake(ppu) can be called before ::sleep(ppu) therefore nop-ing out the notification
* Avoid inconsistencies with vm flags on page fault cause detection
* Fix sys_mmapper_enable_page_fault_notification EBUSY check
from RE it's allowed to register the same queue twice (on a different area) but not to enable page fault notifications twice
Is a memory manager for ASMJIT, replaces asmjit::JitRuntime
Unified memory manager for ASMJIT and LLVM
Unified SPU trampoline generation
Remove previous workarounds
Allow parallel compilation of SPU code, both at startup and runtime
Remove 'SPU Shared Runtime' option (it became obsolete)
Refactor spu_runtime class (now is common for ASMJIT and LLVM)
Implement SPU ubertrampoline generation in raw assembly (LLVM)
Minor improvement of balanced_wait_until<> and balanced_awaken<>
Make JIT MemoryManager2 shared (global)
Fix wrong assertion in cond_variable
Implement helper functions balanced_wait_until and balanced_awaken
They include new path for Windows 8.1+ (WaitOnAddress)
shared_mutex, cond_variable, cond_one, cond_x16 modified to use it
Added helper function utils::popcnt16
Replace most semaphore<> with shared_mutex
lf_queue<>: unbound FIFO queue with dynamic linked-list
lf_value<>: concurrently-assignable value readable without locking at the cost of memory (using dynamic linked list)
Add atomic_t<>::compare_exchange
Rewrite to use unsigned arithmetic, shrink to u32
Ensure zero default unlocked state (will need it later)
Inline all public methods, rewrite lock_upgrade()
Remove try_lock_degrade(), lock_degrade() methods
Implement lock_downgrade() (now trivial)
Remove is_reading(), added is_free()
Added reader_lock::try_upgrade()
- ASSUME now uses __builtin_assume in clang
- ASSERT defined as a wrapper around verify
- AUDIT aliases ASSERT when _DEBUG or _AUDIT are set, otherwise empty
* CMake: Refactor build to multiple libraries
- Refactor CMake build system by creating separate libraries for
different components
- Create interface libraries for most dependencies and add 3rdparty::*
ALIAS targets for ease of use and use them to try specifying correct
dependencies for each target
- Prefer 3rdparty:: ALIAS when linking dependencies
- Exclude xxHash subdirectory from ALL build target
- Add USE_SYSTEM_ZLIB option to select between using included ZLib and
the ZLib in CMake search path
* Add cstring include to Log.cpp
* CMake: Add 3rdparty::glew interface target
* Add Visual Studio CMakeSettings.json to gitignore
* CMake: Move building and finding LLVM to 3rdparty/llvm.cmake script
- LLVM is now built under 3rdparty/ directory in the binary directory
* CMake: Move finding Qt5 to 3rdparty/qt5.cmake script
- Script has to be included in rpcs3/CMakeLists.txt because it defines
Qt5::moc target which isn't available in that folder if it is
included in 3rdparty directory
- Set AUTOMOC and AUTOUIC properties for targets requiring them (rpcs3
and rpcs3_ui) instead of setting CMAKE_AUTOMOC and CMAKE_AUTOUIC so
those properties are not defined for all targets under rpcs3 dir
* CMake: Remove redundant code from rpcs3/CMakeLists.txt
* CMake: Add BUILD_LLVM_SUBMODULE option instead of hardcoded check
- Add BUILD_LLVM_SUBMODULE option (defaults to ON) to allow controlling
usage of the LLVM submodule.
- Move option definitions to root CMakeLists
* CMake: Remove separate Emu subtargets
- Based on discussion in pull request #5032, I decided to combine
subtargets under Emu folder back to a single rpcs3_emu target
* CMake: Remove utilities, loader and crypto targets: merge them to Emu
- Removed separate targets and merged them into rpcs3_emu target as
recommended in pull request (#5032) conversations. Separating targets
probably later in a separate pull request
* Fix relative includes in pad_thread.cpp
* Fix Travis-CI cloning all submodules needlessly
Preprocess . and .. correctly
Don't use recursive locking
Also use std::string_view
Fix format system for std::string and std::string_view
Fix fmt::merge for std::string_view
Remove vm::ptr operator %
This was a bad idea but explicit_bool_t was created almost for it
Other removed types are unused and have little to no meaning
Remove "atomic operator" classes
Remove test, test_and_set, test_and_reset, test_and_complement global functions
Simplify atomic_t<> with constexpr if, remove some garbage
Redesign bs_t<> to use class, mark its methods constexpr
Implement atomic_bs_t<> for optimizations
Remove unused __bitwise_ops concept (should be in other header anyway)
Bitsets can now be tested via safe bool conversion
Utilities/Log.cpp: In member function 'void logs::file_writer::log(logs::level, const char*, std::size_t)':
Utilities/Log.cpp:559:9: error: 'memcpy' is not a member of 'std'
std::memcpy(pos, text, frag);
^~~~~~
Utilities/Log.cpp:559:9: note: suggested alternative: 'empty'
std::memcpy(pos, text, frag);
^~~~~~
empty
Utilities/Log.cpp:560:9: error: 'memcpy' is not a member of 'std'
std::memcpy(m_fptr, text + frag, size - frag);
^~~~~~
Utilities/Log.cpp:560:9: note: suggested alternative: 'empty'
std::memcpy(m_fptr, text + frag, size - frag);
^~~~~~
empty
Utilities/Log.cpp:564:9: error: 'memcpy' is not a member of 'std'
std::memcpy(pos, text, size);
^~~~~~
Utilities/Log.cpp:564:9: note: suggested alternative: 'empty'
std::memcpy(pos, text, size);
^~~~~~
empty
Utilities/sync.h: In member function 'int futex(int*, int, int, const timespec*, int*, int)::futex_map::operator()(int*, int, int, const timespec*, int*, uint)':
Utilities/sync.h:110:20: error: 'find' is not a member of 'std'
map.erase(std::find(map.find(uaddr), map.end(), ref));
^~~~
Utilities/sync.h:110:20: note: suggested alternative: 'rend'
map.erase(std::find(map.find(uaddr), map.end(), ref));
^~~~
rend
Build SPU cache after PPU, fix mixing progress
SPU ASMJIT: add support for Giga mode
SPU ASMJIT: use the same spu.log location as SPU LLVM
SPU: improve spu.log disasm
SPU: improve trampolines, unify with SPU ASMJIT
SPU: decode interrupt handler address from BR/BRA at 0x0
SPU LLVM: support Mega/Giga modes
SPU LLVM: implement function chunks
SPU LLVM: use PHI nodes, value visibility across basic blocks
SPU LLVM: implement function chunk table
New simple memory manager for LLVM (bugfix)
Drop _xbegin family intrinsics due to bad codegen
Implemented `notifier` class, replacing vm::notify
Minor optimization: detach transactions from global mutex on TSX path
Minor optimization: don't acquire vm::passive_lock on PPU on TSX path
Utilities/VirtualMemory.cpp:123:8: error: use of undeclared identifier 'errno'
if (errno != EEXIST)
^
Utilities/VirtualMemory.cpp:123:17: error: use of undeclared identifier 'EEXIST'
if (errno != EEXIST)
^
Use permissions to make it inaccessible
On Windows, autodelete the file
Implement fs::unread for this purpose
Rename fs::unshare to fs::lock
Fix fs::lock correctness
Utilities/Thread.cpp:1644:2: error: use of undeclared identifier 'pthread_setname_np'; did you mean 'pthread_set_name_np'?
pthread_setname_np(pthread_self(), m_name.substr(0, 15).c_str());
^~~~~~~~~~~~~~~~~~
pthread_set_name_np
/usr/include/pthread_np.h:58:6: note: 'pthread_set_name_np' declared here
void pthread_set_name_np(pthread_t, const char *);
^
* Made GDB debugger working with IDA
* Added async interrupts support
* Report proper thread after pausing
* Support attaching debugger before running app
* Input: further work on remapping Xinput and begin work on remapping DS4
* Input: Improve pad_settings_dialog a bit and begin Remapping for XInput
* Input: begin evdev remapping and change all handlers to use cfg::string
* Input: finish work on remapping evdev
and some more crap
* Input: finish work on remapping Xinput and DS4
* Input: add DS4 Colors to DS4 config
* Input: Improve DS4 deadzone scaling
Jarves made some mistakes, so I'll fix them in the follow up commit
* Input: fix Jarves fixes on DS4 deadzone
and remove unnecessary usage of toUtf8
* Input: add primitive batterychecks to XInput and DS4
* Input: add mmjoystick remapping
* Input: Fix evdev and some Vibration issues
* Input: adjust capabilities to fix stick input for games like LoS 2
also fix threshold slider minimum
also add ps button to all the handlers
* Input: Further evdev work
based on danilaml code review and own debugging:
Fixed path issue, <= 0 issue, some captures, const, axis with same codes.
Adds a map to each device that differentiates negative and positive axis mappings.
adjusted rest of the file to tabs (ListDevices and beginning of threadProc)
* Input: use 20ms vibration update time for xbox one elite controllers.
* Input: Fix return type of Clamp()
* Input: Evdev Fix
* Input: Evdev Optional GetNextButtonPress
presumably better than the other
* Input: review changes
* Input: evdev: fix wrong index in axis handling
move bindpadtodevice down to keep consistency between handlers and not get crazy
* Input: evdev: fix expensive add_device in GetNextButtonPress
* cleanup
* Input: mmjoy: fix type
* Input: evdev: final fixes
* Input: evdev: exclude unnecessary buttons while mapping Xbox 360 or DS4
* Input: add deadzone preview by passing necessary values in callback
use 0.5 of max value for threshold in pad dialog
* Input: get rid of all-uppercase variables
* Thread: unbreak on BSDs after dbc9bdfe02
Utilities/Thread.cpp:1920:2: error: unknown type name 'cpu_set_t'; did you mean 'cpusetid_t'?
cpu_set_t cs;
^~~~~~~~~
cpusetid_t
/usr/include/sys/types.h:84:22: note: 'cpusetid_t' declared here
typedef __cpusetid_t cpusetid_t;
^
Utilities/Thread.cpp:1921:2: error: use of undeclared identifier 'CPU_ZERO'
CPU_ZERO(&cs);
^
Utilities/Thread.cpp:1922:2: error: use of undeclared identifier 'CPU_SET'
CPU_SET(core, &cs);
^
Utilities/Thread.cpp:1923:48: error: unknown type name 'cpu_set_t'; did you mean 'cpusetid_t'?
pthread_setaffinity_np(pthread_self(), sizeof(cpu_set_t), &cs);
^~~~~~~~~
cpusetid_t
* JIT: use MAP_32BIT on Linux and FreeBSD
Unless RLIMIT_DATA is low enough FreeBSD by default reserves lower 2Gb
for brk(2) style heap, ignoring mmap(2) address hint requested by RPCS3.
Passing MAP_32BIT fixes the following crash
Assertion failed: ((Type == ELF::R_X86_64_32 && (Value <= UINT32_MAX)) || (Type == ELF::R_X86_64_32S && ((int64_t)Value <= INT32_MAX && (int64_t)Value >= INT32_MIN))), function resolveX86_64Relocation, file /usr/ports/devel/llvm40/work/llvm-4.0.1.src/lib/ExecutionEngine/RuntimeDyld/RuntimeDyldELF.cpp, line 287.
* build: unbreak -DVULKAN_PREBUILT with system glslang on Unix
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:4:10: fatal error: '../../../../Vulkan/glslang/SPIRV/GlslangToSpv.h' file not found
#include "../../../../Vulkan/glslang/SPIRV/GlslangToSpv.h"
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
rpcs3/CMakeFiles/rpcs3.dir/Emu/RSX/VK/VKCommonDecompiler.cpp.o: In function `vk::compile_glsl_to_spv(std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> >&, glsl::program_domain, std::__1::vector<unsigned int, std::__1::allocator<unsigned int> >&)':
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x50e): undefined reference to `glslang::TProgram::TProgram()'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x51d): undefined reference to `glslang::TShader::TShader(EShLanguage)'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x542): undefined reference to `glslang::TShader::setStrings(char const* const*, int)'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x581): undefined reference to `glslang::TShader::parse(TBuiltInResource const*, int, EProfile, bool, bool, EShMessages, glslang::TShader::Includer&)'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x5d6): undefined reference to `glslang::TProgram::link(EShMessages)'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x5f1): undefined reference to `glslang::GlslangToSpv(glslang::TIntermediate const&, std::__1::vector<unsigned int, std::__1::allocator<unsigned int> >&, glslang::SpvOptions*)'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x5ff): undefined reference to `glslang::TShader::getInfoLog()'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x61a): undefined reference to `glslang::TShader::getInfoDebugLog()'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x630): undefined reference to `glslang::TShader::~TShader()'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x63c): undefined reference to `glslang::TProgram::~TProgram()'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x6d2): undefined reference to `glslang::TShader::~TShader()'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x6de): undefined reference to `glslang::TProgram::~TProgram()'
rpcs3/CMakeFiles/rpcs3.dir/Emu/RSX/VK/VKCommonDecompiler.cpp.o: In function `vk::initialize_compiler_context()':
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x6f5): undefined reference to `glslang::InitializeProcess()'
rpcs3/CMakeFiles/rpcs3.dir/Emu/RSX/VK/VKCommonDecompiler.cpp.o: In function `vk::finalize_compiler_context()':
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x856): undefined reference to `glslang::FinalizeProcess()'
* build/msvc: add missing glslang include directory after 6bb3f1b4d7
"c:\projects\rpcs3\rpcs3\VKGSRender.vcxproj" (default target) (15) ->
(ClCompile target) ->
Emu\RSX\VK\VKCommonDecompiler.cpp(4): fatal error C1083: Cannot open include file: 'SPIRV/GlslangToSpv.h': No such file or directory [c:\projects\rpcs3\rpcs3\VKGSRender.vcxproj]
rsx/vk/shaders_cache: Move vp control mask to dynamic state
rsx/vk/gl: adds a shader cache for GL. Also Separates pipeline storage for each backend
rsx: Add more texture state variables to the cache
* Fix always-true conditions in sceNp module
* gl_render_targets: useless check on unsigned variable, possible bug
* fixed UB in crypto utility functions
* copy-paste error in vk::init_default_resources
* pass strings by const ref
* Dont copy vectors. Make sure copies are not needed because functions are used in a multi-threaded context.
For now, compile only one block at time
Use tail calls to move between blocks
Fully write PPU context (except CIA)
This fixes many compatibility problems
* sys_net: don't use fds_bits from a system header on FreeBSD
rpcs3/Emu/Cell/Modules/sys_net.cpp:137:14: error: no member named '__fds_bits' in
'sys_net::fd_set'; did you mean 'fds_bits'?
if (src->fds_bits[i] & (1 << bit))
^~~~~~~~
fds_bits
/usr/include/sys/select.h:75:18: note: expanded from macro 'fds_bits'
#define fds_bits __fds_bits
^
rpcs3/Emu/Cell/Modules/sys_net.h:114:13: note: 'fds_bits' declared here
be_t<u32> fds_bits[32];
^
* GUI: fallback to xdg-open on other Unices
rpcs3/Gui/GameViewer.cpp:289:26: error: use of undeclared identifier 'command'
wxExecute(fmt::FromUTF8(command));
^
* File: FreeBSD never supported copyfile(3) but sendfile(2) works fine
Utilities/File.cpp:114:10: fatal error: 'copyfile.h' file not found
#include <copyfile.h>
^~~~~~~~~~~~
* Thread: add signal handling for BSDs
Utilities/Thread.cpp:761:23: error: use of undeclared identifier 'REG_RAX'
static const decltype(REG_RAX) reg_table[] =
^
Utilities/Thread.cpp:763:2: error: use of undeclared identifier 'REG_RAX'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:763:11: error: use of undeclared identifier 'REG_RCX'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:763:20: error: use of undeclared identifier 'REG_RDX'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:763:29: error: use of undeclared identifier 'REG_RBX'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:763:38: error: use of undeclared identifier 'REG_RSP'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:763:47: error: use of undeclared identifier 'REG_RBP'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:763:56: error: use of undeclared identifier 'REG_RSI'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:763:65: error: use of undeclared identifier 'REG_RDI'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:764:2: error: use of undeclared identifier 'REG_R8'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:10: error: use of undeclared identifier 'REG_R9'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:18: error: use of undeclared identifier 'REG_R10'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:27: error: use of undeclared identifier 'REG_R11'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:36: error: use of undeclared identifier 'REG_R12'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:45: error: use of undeclared identifier 'REG_R13'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:54: error: use of undeclared identifier 'REG_R14'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:63: error: use of undeclared identifier 'REG_R15'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:72: error: use of undeclared identifier 'REG_RIP'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:792:26: error: no member named 'gregs' in '__mcontext'
const u64 reg_value = *X64REG(context, reg - X64R_RAX);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:804:21: error: no member named 'gregs' in '__mcontext'
out_value = (u8)(*X64REG(context, reg - X64R_AL));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:809:21: error: no member named 'gregs' in '__mcontext'
out_value = (u8)(*X64REG(context, reg - X64R_AH) >> 8);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:815:31: error: no member named 'gregs' in '__mcontext'
const s8 imm_value = *(s8*)(RIP(context) + i_size - 1);
^~~~~~~~~~~~
Utilities/Thread.cpp:784:18: note: expanded from macro 'RIP'
#define RIP(c) (*X64REG((c), 16))
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:827:33: error: no member named 'gregs' in '__mcontext'
const s16 imm_value = *(s16*)(RIP(context) + i_size - 2);
^~~~~~~~~~~~
Utilities/Thread.cpp:784:18: note: expanded from macro 'RIP'
#define RIP(c) (*X64REG((c), 16))
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:836:33: error: no member named 'gregs' in '__mcontext'
const s32 imm_value = *(s32*)(RIP(context) + i_size - 4);
^~~~~~~~~~~~
Utilities/Thread.cpp:784:18: note: expanded from macro 'RIP'
#define RIP(c) (*X64REG((c), 16))
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:846:20: error: no member named 'gregs' in '__mcontext'
out_value = (u32)RCX(context);
^~~~~~~~~~~~
Utilities/Thread.cpp:779:18: note: expanded from macro 'RCX'
#define RCX(c) (*X64REG((c), 1))
^~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:851:19: error: no member named 'gregs' in '__mcontext'
const u32 _cf = EFLAGS(context) & 0x1;
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:851:19: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:852:19: error: no member named 'gregs' in '__mcontext'
const u32 _zf = EFLAGS(context) & 0x40;
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:852:19: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:853:19: error: no member named 'gregs' in '__mcontext'
const u32 _sf = EFLAGS(context) & 0x80;
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:853:19: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:854:19: error: no member named 'gregs' in '__mcontext'
const u32 _of = EFLAGS(context) & 0x800;
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:854:19: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:855:19: error: no member named 'gregs' in '__mcontext'
const u32 _pf = EFLAGS(context) & 0x4;
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:855:19: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:885:12: error: no member named 'gregs' in '__mcontext'
case 1: *X64REG(context, reg - X64R_RAX) = value & 0xff | *X64REG(context, re...
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:885:62: error: no member named 'gregs' in '__mcontext'
...*X64REG(context, reg - X64R_RAX) = value & 0xff | *X64REG(context, reg - X64R_RAX) & 0xffffff...
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:886:12: error: no member named 'gregs' in '__mcontext'
case 2: *X64REG(context, reg - X64R_RAX) = value & 0xffff | *X64REG(context, ...
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:886:64: error: no member named 'gregs' in '__mcontext'
...reg - X64R_RAX) = value & 0xffff | *X64REG(context, reg - X64R_RAX) & 0xffff0000; return true;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:887:12: error: no member named 'gregs' in '__mcontext'
case 4: *X64REG(context, reg - X64R_RAX) = value & 0xffffffff; return true;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:888:12: error: no member named 'gregs' in '__mcontext'
case 8: *X64REG(context, reg - X64R_RAX) = value; return true;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:913:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) |= 0x1; // set CF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:913:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:917:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) &= ~0x1; // clear CF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:917:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:922:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) |= 0x40; // set ZF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:922:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:926:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) &= ~0x40; // clear ZF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:926:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:931:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) |= 0x80; // set SF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:931:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:935:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) &= ~0x80; // clear SF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:935:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:940:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) |= 0x800; // set OF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:940:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:944:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) &= ~0x800; // clear OF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:944:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:953:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) |= 0x4; // set PF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:953:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:957:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) &= ~0x4; // clear PF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:957:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:962:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) |= 0x10; // set AF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:962:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:966:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) &= ~0x10; // clear AF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:966:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:976:7: error: no member named 'gregs' in '__mcontext'
if (EFLAGS(context) & 0x400 /* direction flag */)
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:976:7: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:1020:25: error: no member named 'gregs' in '__mcontext'
auto code = (const u8*)RIP(context);
^~~~~~~~~~~~
Utilities/Thread.cpp:784:18: note: expanded from macro 'RIP'
#define RIP(c) (*X64REG((c), 16))
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:1146:3: error: no member named 'gregs' in '__mcontext'
RIP(context) += i_size;
^~~~~~~~~~~~
Utilities/Thread.cpp:784:18: note: expanded from macro 'RIP'
#define RIP(c) (*X64REG((c), 16))
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:1368:47: error: no member named 'gregs' in '__mcontext'
const bool is_writing = context->uc_mcontext.gregs[REG_ERR] & 0x2;
~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:1368:53: error: use of undeclared identifier 'REG_ERR'
const bool is_writing = context->uc_mcontext.gregs[REG_ERR] & 0x2;
^
Utilities/Thread.cpp:1393:89: error: no member named 'gregs' in '__mcontext'
...%s location %p at %p.", cause, info->si_addr, RIP(context)));
^~~~~~~~~~~~
Utilities/Thread.cpp:784:18: note: expanded from macro 'RIP'
#define RIP(c) (*X64REG((c), 16))
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
* Thread: add explict casts for incomplete pthread_t on some platforms
Utilities/Thread.cpp:1467:17: error: no viable overloaded '='
ctrl->m_thread = thread;
~~~~~~~~~~~~~~ ^ ~~~~~~
Utilities/Atomic.h:776:12: note: candidate function not viable: cannot convert argument of
incomplete type 'pthread_t' (aka 'pthread *') to 'const atomic_t<unsigned long>' for 1st
argument
atomic_t& operator =(const atomic_t&) = delete;
^
Utilities/Atomic.h:902:7: note: candidate function not viable: cannot convert argument of
incomplete type 'pthread_t' (aka 'pthread *') to 'const type' (aka 'const unsigned long') for
1st argument
type operator =(const type& rhs)
^
Utilities/Thread.cpp:1656:3: error: no matching function for call to 'pthread_detach'
pthread_detach(m_thread.raw());
^~~~~~~~~~~~~~
/usr/include/pthread.h:218:6: note: candidate function not viable: no known conversion from 'type'
(aka 'unsigned long') to 'pthread_t' (aka 'pthread *') for 1st argument
int pthread_detach(pthread_t);
^
* build: dlopen() maybe in libc
/usr/bin/ld: cannot find -ldl
c++: error: linker command failed with exit code 1 (use -v to see invocation)
* build: iconv() maybe available on some BSDs in libc
/usr/bin/ld: cannot find -liconv
c++: error: linker command failed with exit code 1 (use -v to see invocation)
* build: hidapi-hidraw is only built on Linux
/usr/bin/ld: cannot find -lhidapi-hidraw
c++: error: linker command failed with exit code 1 (use -v to see invocation)
* Thread: use getrusage() on more POSIX-like systems
* Qt: don't return NULL handle on other platforms
rpcs3/rpcs3qt/gs_frame.cpp:120:1: warning: control reaches end of non-void function [-Wreturn-type]
}
^
* build: properly disable Vulkan on other platforms
In file included from rpcs3/rpcs3_app.cpp:40:
In file included from rpcs3/Emu/RSX/VK/VKGSRender.h:3:
rpcs3/Emu/RSX/VK/VKHelpers.h:1209:42: error: unknown type name 'device_queues'
std::vector<VkBool32> supportsPresent(device_queues);
^
rpcs3/Emu/RSX/VK/VKHelpers.h:1211:4: error: expected member name or ';' after declaration specifiers
for (u32 index = 0; index < device_queues; index++)
^
rpcs3/Emu/RSX/VK/VKHelpers.h:1221:4: error: expected member name or ';' after declaration specifiers
for (u32 i = 0; i < device_queues; i++)
^
rpcs3/Emu/RSX/VK/VKHelpers.h:1256:4: error: expected member name or ';' after declaration specifiers
if (graphicsQueueNodeIndex != presentQueueNodeIndex)
^
rpcs3/Emu/RSX/VK/VKHelpers.h:1261:4: error: expected member name or ';' after declaration specifiers
CHECK_RESULT(vkGetPhysicalDeviceSurfaceFormatsKHR(dev, surface, &formatCount, nullptr));
^
[...]
/usr/bin/ld: cannot find -lvulkan
c++: error: linker command failed with exit code 1 (use -v to see invocation)
* build: make install/strip work by moving commands
* Qt: create surface for GL context if it wasn't ready
#0 strlen (str=0x0) at /usr/src/lib/libc/string/strlen.c:100
#1 0x000000000090f02e in std::__1::char_traits<char>::length (__s=0x0)
at /usr/include/c++/v1/__string:215
#2 std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> >::basic_string (__s=0x0, this=<optimized out>) at /usr/include/c++/v1/string:1547
#3 gl::capabilities::initialize (this=0x2ba32a0 <gl::g_driver_caps>)
at rpcs3/Emu/RSX/GL/GLHelpers.h:133
#4 0x000000000090d3dd in gl::get_driver_caps () at rpcs3/Emu/RSX/GL/GLHelpers.cpp:56
#5 0x00000000008fa511 in GLGSRender::on_init_thread (this=0x838d30018)
at rpcs3/Emu/RSX/GL/GLGSRender.cpp:484
#6 0x0000000000938f9e in rsx:🧵:on_task (this=0x838d30018)
at rpcs3/Emu/RSX/RSXThread.cpp:334
#7 0x0000000000abc329 in task_stack::task_type<named_thread::start_thread(std::__1::shared_ptr<void> const&)::$_10>::invoke() ()
#8 0x0000000000abc114 in thread_ctrl::start(std::__1::shared_ptr<thread_ctrl> const&, task_stack)::$_7::__invoke(void*) ()
#9 0x0000000801e60c35 in thread_start (curthread=0x843650a00)
at /usr/src/lib/libthr/thread/thr_create.c:289
#10 0x0000000000000000 in ?? ()
* build: don't abort without git metadata
-- Found Git: /usr/local/bin/git (found version "2.13.1")
fatal: Not a git repository (or any parent up to mount point /)
Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).
CMake Warning at git-version.cmake:12 (message):
git rev-list failed, unable to include version.
* build: non-parallel needs git-version.h earlier
rpcs3/rpcs3_version.cpp:3:10: fatal error: 'git-version.h' file not found
#include "git-version.h"
^~~~~~~~~~~~~~~
1 error generated.
Nekotekina