/*  OnePAD
 *  Copyright (C) 2016
 *
 *  Based on LilyPad
 *  Copyright (C) 2002-2014  PCSX2 Dev Team/ChickenLiver
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
 */

#include "state_management.h"

// Typical packet response on the bus
static const u8 ConfigExit[7] = {0x5A, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
static const u8 noclue[7] = {0x5A, 0x00, 0x00, 0x02, 0x00, 0x00, 0x5A};
static const u8 setMode[7] = {0x5A, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
static const u8 queryModelDS2[7] = {0x5A, 0x03, 0x02, 0x00, 0x02, 0x01, 0x00};
static const u8 queryModelDS1[7] = {0x5A, 0x01, 0x02, 0x00, 0x02, 0x01, 0x00};
static const u8 queryComb[7] = {0x5A, 0x00, 0x00, 0x02, 0x00, 0x01, 0x00};
static const u8 queryMode[7] = {0x5A, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
static const u8 setNativeMode[7] = {0x5A, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5A};

static u8 queryMaskMode[7] = {0x5A, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x5A};

static const u8 queryAct[2][7] = {
    {0x5A, 0x00, 0x00, 0x01, 0x02, 0x00, 0x0A},
    {0x5A, 0x00, 0x00, 0x01, 0x01, 0x01, 0x14}};

QueryInfo query;
Pad pads[2][4];
int slots[2] = {0, 0};

//////////////////////////////////////////////////////////////////////
// QueryInfo implementation
//////////////////////////////////////////////////////////////////////

void QueryInfo::reset()
{
    port = 0;
    slot = 0;
    lastByte = 1;
    currentCommand = 0;
    numBytes = 0;
    queryDone = 1;
    memset(response, 0xF3, sizeof(response));
}

u8 QueryInfo::start_poll(int _port)
{
    if (port > 1) {
        reset();
        return 0;
    }

    queryDone = 0;
    port = _port;
    slot = slots[port];
    numBytes = 2;
    lastByte = 0;

    return 0xFF;
}

//////////////////////////////////////////////////////////////////////
// Pad implementation
//////////////////////////////////////////////////////////////////////

void Pad::set_mode(int _mode)
{
    mode = _mode;

#if 0
    fprintf(stdout, "OnePad: set new pad mode=");
    if (mode == MODE_DIGITAL)
        fprintf(stdout, "DIGITAL\n");
    else if (mode == MODE_ANALOG)
        fprintf(stdout, "ANALOG\n");
    else if (mode == MODE_DS2_NATIVE)
        fprintf(stdout, "DS2 NATIVE\n");
    else
        fprintf(stdout, "??? 0x%x\n", mode);
#endif
}

void Pad::set_vibrate(int motor, u8 val)
{
    nextVibrate[motor] = val;
}

void Pad::reset_vibrate()
{
    set_vibrate(0, 0);
    set_vibrate(1, 0);
    memset(vibrate, 0xFF, sizeof(vibrate));
    vibrate[0] = 0x5A;
}

void Pad::reset()
{
    memset(this, 0, sizeof(PadFreezeData));

    set_mode(MODE_DIGITAL);
    umask[0] = umask[1] = 0xFF;

    // Sets up vibrate variable.
    reset_vibrate();
}

void Pad::rumble(unsigned port)
{
    for (unsigned motor = 0; motor < 2; motor++) {
        // TODO:  Probably be better to send all of these at once.
        if (nextVibrate[motor] | currentVibrate[motor]) {
            currentVibrate[motor] = nextVibrate[motor];

            GamePad::DoRumble(motor, port);
        }
    }
}

void Pad::stop_vibrate_all()
{
#if 0
	for (int i=0; i<8; i++) {
		SetVibrate(i&1, i>>1, 0, 0);
		SetVibrate(i&1, i>>1, 1, 0);
	}
#endif
    // FIXME equivalent ?
    for (int port = 0; port < 2; port++)
        for (int slot = 0; slot < 4; slot++)
            pads[port][slot].reset_vibrate();
}

void Pad::reset_all()
{
    for (int port = 0; port < 2; port++)
        for (int slot = 0; slot < 4; slot++)
            pads[port][slot].reset();
}

void Pad::rumble_all()
{
    for (unsigned port = 0; port < 2; port++)
        for (unsigned slot = 0; slot < 4; slot++)
            pads[port][slot].rumble(port);
}

//////////////////////////////////////////////////////////////////////
// Pad implementation
//////////////////////////////////////////////////////////////////////

inline bool IsDualshock2()
{
// FIXME
#if 0
	return config.padConfigs[query.port][query.slot].type == Dualshock2Pad ||
			(config.padConfigs[query.port][query.slot].type == GuitarPad && config.GH2);
#else
    return true;
#endif
}

u8 pad_start_poll(u8 pad)
{
    return query.start_poll(pad - 1);
}

u8 pad_poll(u8 value)
{
    if (query.lastByte + 1 >= query.numBytes) {
        return 0;
    }
    if (query.lastByte && query.queryDone) {
        return query.response[++query.lastByte];
    }

    Pad *pad = &pads[query.port][query.slot];

    if (query.lastByte == 0) {
        query.lastByte++;
        query.currentCommand = value;

        switch (value) {
            case CMD_CONFIG_MODE:
                if (pad->config) {
                    // In config mode.  Might not actually be leaving it.
                    query.set_result(ConfigExit);
                    return 0xF3;
                }
            // fallthrough on purpose (but I don't know why)

            case CMD_READ_DATA_AND_VIBRATE: {
                query.response[2] = 0x5A;
#if 0
				int i;
				Update(query.port, query.slot);
				ButtonSum *sum = &pad->sum;

				u8 b1 = 0xFF, b2 = 0xFF;
				for (i = 0; i<4; i++) {
					b1 -= (sum->buttons[i]   > 0) << i;
				}
				for (i = 0; i<8; i++) {
					b2 -= (sum->buttons[i+4] > 0) << i;
				}
#endif

// FIXME
#if 0
				if (config.padConfigs[query.port][query.slot].type == GuitarPad && !config.GH2) {
					sum->buttons[15] = 255;
					// Not sure about this.  Forces wammy to be from 0 to 0x7F.
					// if (sum->sticks[2].vert > 0) sum->sticks[2].vert = 0;
				}
#endif

#if 0
				for (i = 4; i<8; i++) {
					b1 -= (sum->buttons[i+8] > 0) << i;
				}
#endif

// FIXME
#if 0
				//Left, Right and Down are always pressed on Pop'n Music controller.
				if (config.padConfigs[query.port][query.slot].type == PopnPad)
					b1=b1 & 0x1f;
#endif

                uint16_t buttons = g_key_status.get(query.port);

                query.numBytes = 5;

                query.response[3] = (buttons >> 8) & 0xFF;
                query.response[4] = (buttons >> 0) & 0xFF;

                if (pad->mode != MODE_DIGITAL) { // ANALOG || DS2 native
                    query.numBytes = 9;

                    query.response[5] = g_key_status.get(query.port, PAD_R_RIGHT);
                    query.response[6] = g_key_status.get(query.port, PAD_R_UP);
                    query.response[7] = g_key_status.get(query.port, PAD_L_RIGHT);
                    query.response[8] = g_key_status.get(query.port, PAD_L_UP);

                    if (pad->mode != MODE_ANALOG) { // DS2 native
                        query.numBytes = 21;

                        query.response[9] = !test_bit(buttons, 13) ? g_key_status.get(query.port, PAD_RIGHT) : 0;
                        query.response[10] = !test_bit(buttons, 15) ? g_key_status.get(query.port, PAD_LEFT) : 0;
                        query.response[11] = !test_bit(buttons, 12) ? g_key_status.get(query.port, PAD_UP) : 0;
                        query.response[12] = !test_bit(buttons, 14) ? g_key_status.get(query.port, PAD_DOWN) : 0;

                        query.response[13] = !test_bit(buttons, 4) ? g_key_status.get(query.port, PAD_TRIANGLE) : 0;
                        query.response[14] = !test_bit(buttons, 5) ? g_key_status.get(query.port, PAD_CIRCLE) : 0;
                        query.response[15] = !test_bit(buttons, 6) ? g_key_status.get(query.port, PAD_CROSS) : 0;
                        query.response[16] = !test_bit(buttons, 7) ? g_key_status.get(query.port, PAD_SQUARE) : 0;
                        query.response[17] = !test_bit(buttons, 2) ? g_key_status.get(query.port, PAD_L1) : 0;
                        query.response[18] = !test_bit(buttons, 3) ? g_key_status.get(query.port, PAD_R1) : 0;
                        query.response[19] = !test_bit(buttons, 0) ? g_key_status.get(query.port, PAD_L2) : 0;
                        query.response[20] = !test_bit(buttons, 1) ? g_key_status.get(query.port, PAD_R2) : 0;
                    }
                }

#if 0
				query.response[3] = b1;
				query.response[4] = b2;

				query.numBytes = 5;
				if (pad->mode != MODE_DIGITAL) {
					query.response[5] = Cap((sum->sticks[0].horiz+255)/2);
					query.response[6] = Cap((sum->sticks[0].vert+255)/2);
					query.response[7] = Cap((sum->sticks[1].horiz+255)/2);
					query.response[8] = Cap((sum->sticks[1].vert+255)/2);

					query.numBytes = 9;
					if (pad->mode != MODE_ANALOG) {
						// Good idea?  No clue.
						//query.response[3] &= pad->mask[0];
						//query.response[4] &= pad->mask[1];

						// No need to cap these, already done int CapSum().
						query.response[9] = (unsigned char)sum->buttons[13]; //D-pad right
						query.response[10] = (unsigned char)sum->buttons[15]; //D-pad left
						query.response[11] = (unsigned char)sum->buttons[12]; //D-pad up
						query.response[12] = (unsigned char)sum->buttons[14]; //D-pad down

						query.response[13] = (unsigned char) sum->buttons[8];
						query.response[14] = (unsigned char) sum->buttons[9];
						query.response[15] = (unsigned char) sum->buttons[10];
						query.response[16] = (unsigned char) sum->buttons[11];
						query.response[17] = (unsigned char) sum->buttons[6];
						query.response[18] = (unsigned char) sum->buttons[7];
						query.response[19] = (unsigned char) sum->buttons[4];
						query.response[20] = (unsigned char) sum->buttons[5];
						query.numBytes = 21;
					}
				}
#endif
            }

                query.lastByte = 1;
                return pad->mode;

            case CMD_SET_VREF_PARAM:
                query.set_final_result(noclue);
                break;

            case CMD_QUERY_DS2_ANALOG_MODE:
                // Right?  Wrong?  No clue.
                if (pad->mode == MODE_DIGITAL) {
                    queryMaskMode[1] = queryMaskMode[2] = queryMaskMode[3] = 0;
                    queryMaskMode[6] = 0x00;
                } else {
                    queryMaskMode[1] = pad->umask[0];
                    queryMaskMode[2] = pad->umask[1];
                    queryMaskMode[3] = 0x03;
                    // Not entirely sure about this.
                    //queryMaskMode[3] = 0x01 | (pad->mode == MODE_DS2_NATIVE)*2;
                    queryMaskMode[6] = 0x5A;
                }
                query.set_final_result(queryMaskMode);
                break;

            case CMD_SET_MODE_AND_LOCK:
                query.set_result(setMode);
                pad->reset_vibrate();
                break;

            case CMD_QUERY_MODEL_AND_MODE:
                if (IsDualshock2()) {
                    query.set_final_result(queryModelDS2);
                } else {
                    query.set_final_result(queryModelDS1);
                }
                // Not digital mode.
                query.response[5] = (pad->mode & 0xF) != 1;
                break;

            case CMD_QUERY_ACT:
                query.set_result(queryAct[0]);
                break;

            case CMD_QUERY_COMB:
                query.set_final_result(queryComb);
                break;

            case CMD_QUERY_MODE:
                query.set_result(queryMode);
                break;

            case CMD_VIBRATION_TOGGLE:
                memcpy(query.response + 2, pad->vibrate, 7);
                query.numBytes = 9;
                //query.set_result(pad->vibrate); // warning copy 7b not 8 (but it is really important?)
                pad->reset_vibrate();
                break;

            case CMD_SET_DS2_NATIVE_MODE:
                if (IsDualshock2()) {
                    query.set_result(setNativeMode);
                } else {
                    query.set_final_result(setNativeMode);
                }
                break;

            default:
                query.numBytes = 0;
                query.queryDone = 1;
                break;
        }

        return 0xF3;

    } else {
        query.lastByte++;

        switch (query.currentCommand) {
            case CMD_READ_DATA_AND_VIBRATE:
                if (query.lastByte == pad->vibrateI[0])
                    pad->set_vibrate(1, 255 * (value & 1));
                else if (query.lastByte == pad->vibrateI[1])
                    pad->set_vibrate(0, value);

                break;

            case CMD_CONFIG_MODE:
                if (query.lastByte == 3) {
                    query.queryDone = 1;
                    pad->config = value;
                }
                break;

            case CMD_SET_MODE_AND_LOCK:
                if (query.lastByte == 3 && value < 2) {
                    pad->set_mode(value ? MODE_ANALOG : MODE_DIGITAL);
                } else if (query.lastByte == 4) {
                    if (value == 3)
                        pad->modeLock = 3;
                    else
                        pad->modeLock = 0;

                    query.queryDone = 1;
                }
                break;

            case CMD_QUERY_ACT:
                if (query.lastByte == 3) {
                    if (value < 2)
                        query.set_result(queryAct[value]);
                    // bunch of 0's
                    // else query.set_result(setMode);
                    query.queryDone = 1;
                }
                break;

            case CMD_QUERY_MODE:
                if (query.lastByte == 3 && value < 2) {
                    query.response[6] = 4 + value * 3;
                    query.queryDone = 1;
                }
                // bunch of 0's
                //else data = setMode;
                break;

            case CMD_VIBRATION_TOGGLE:
                if (query.lastByte >= 3) {
                    if (value == 0) {
                        pad->vibrateI[0] = (u8)query.lastByte;
                    } else if (value == 1) {
                        pad->vibrateI[1] = (u8)query.lastByte;
                    }
                    pad->vibrate[query.lastByte - 2] = value;
                }
                break;

            case CMD_SET_DS2_NATIVE_MODE:
                if (query.lastByte == 3 || query.lastByte == 4) {
                    pad->umask[query.lastByte - 3] = value;
                } else if (query.lastByte == 5) {
                    if (!(value & 1))
                        pad->set_mode(MODE_DIGITAL);
                    else if (!(value & 2))
                        pad->set_mode(MODE_ANALOG);
                    else
                        pad->set_mode(MODE_DS2_NATIVE);
                }
                break;

            default:
                return 0;
        }

        return query.response[query.lastByte];
    }
}