Commit Graph

103 Commits

Author SHA1 Message Date
Gregory Hainaut 29aef04fbf gsdx ogl: re-normalize coordinate when TEX0 is invalid
Fix #258
Fix #695
2019-02-20 13:49:57 +01:00
lightningterror dabc99f466 gsdx-ogl: Small colclip improvements.
1. Allow hrd colclip to also run on the unsupported
cases which should be pretty rare.

2. Remove colclip from high sw blending.

3. Disable the hdr colclip shader which may not be
actually required to run.

Idea by Gregory
2019-02-08 14:53:15 +01:00
lightningterror 4ab29eb280 gsdx: Remove some useless dx9 comments. 2019-01-26 16:13:07 +01:00
lightningterror c8f52b0ba3 GSdx-ogl: Move rgb channel 7 to empty slot 5. 2018-11-25 04:06:04 +01:00
lightningterror b360c07253 glsl, fx: Update point sampler comment. 2018-10-09 09:07:45 +02:00
KrossX 5719c6c3c0 glsl: remove signed int cast side (masks and offsets are unsigned to begin with.
Issue #2617
2018-10-04 20:47:03 +02:00
KrossX 9d562a454b GSdx: Limit Wrap negative UV when PS_FST is 0 only. 2018-10-03 15:21:46 +02:00
KrossX 629d2bd425 GSdx: Wrap negative UV on region repeat wrap mode.
Makes UV coord be on the range [0, SIZE) before applying mask and
offset. This fixes Xenosaga's hair for example, which has negative UV
coords.
2018-10-01 22:38:22 +02:00
KrossX e90c87a8ef GSdx-d3d: Keep fract in [0;1] range port from OpenGL.
Fixes texture flickering in Oni on d3d11.

Commit:
a8968257db
2018-09-28 02:33:58 +02:00
lightningterror 1aeec47b30 glsl: Replace leftover tabs with spaces in tfx_fs. 2018-08-22 20:12:53 +02:00
lightningterror d7cdbf6f27 Gsdx: Point Sampler changes.
Re add point sampler to OpenGL. Fixes graphical issues when
Allow 8-bit textures is enabled on AMD gpus.
Issue: https://forums.pcsx2.net/Thread-GSDX-Hardware-mode-Bug-Report-Allow-8-bit-Texture

Adjust the code to be easier to read, and execute the gl code only on amd - suggested by Gregory.

Remove useless ATI_SUCKS define in tfx shader.It wasn't used anywhere outside of the shader.
2018-08-22 20:12:53 +02:00
Gregory Hainaut 38010432ee gsdx ogl: handle float integral coordinate for depth sampling
Fix depth effect regression on Nemo (issue #1979)
2017-07-12 22:03:47 +02:00
Gregory Hainaut e80ca0fa92 gsdx ogl: of course some driver don't work with GL_ARB_enhanced_layouts
Windows and (AMD or Intel)
2016-10-23 12:48:23 +02:00
Gregory Hainaut 8fdf973e66 gsdx glsl: add basic support of GL_ARB_enhanced_layouts (GL4.4)
Hardcode location of interface to the location 0. If I understand the
spec correctly (unlikely), variable in interface will get successive
location.

Goal is to reduce driver work. Instead to compute some location based on
name matching approach (and silly validation), the driver can now use
static allocation.

Tests on future Mesa 13 are welcome
2016-10-19 23:03:39 +02:00
Gregory Hainaut 7ea0e90678 gsdx mipmap:ogl: extend shader to support trilinear filtering 2016-10-13 20:16:38 +02:00
Gregory Hainaut c2b67ccb78 gsdx ogl: implement an alternate shader for Jak Shadows
The game sets the framebuffer as an input texture. So I did the same for
openGL. Code is protected with a CRC. It is working because the game want to sample
pixels.

For the record, I tested it GTA too, it doesn't work as expected because
the game will resize the framebuffer to a smaller one. So you don't have
the guarantee that pixel will be read before a data write.

Note: it requires at least accurate blending set on basic

Note: I need CRC of all Jak games that suffers of this issue. Thanks you :)
2016-09-08 23:58:13 +02:00
Gregory Hainaut 74822d6ba3 gsdx ogl: rework atst handling
* Move the rounding operation in the constant buffer
* Merge less with less equal. And merge greater with greater equal

Need test
2016-08-10 11:30:11 +02:00
Gregory Hainaut 8c4d8cfdca glsl: avoid an unset warning 2016-06-09 18:27:58 +02:00
Gregory Hainaut 2b00447a43 glsl: optimize the number of active constant buffer
Increase the performance on the free driver (Nouveau)

Currently the driver validates all UBO when only 1 is updated. It
is clearly a bad idea to put all UBO in a single common headers.
2016-06-05 16:45:11 +02:00
Gregory Hainaut 564bf8a089 gsdx ogl: terminator 3 supports sampling from the depth 2016-05-30 19:39:52 +02:00
Gregory Hainaut fb26254fbb gsdx ogl: implement a more generic HLE shader for terminator 3
Hopefully without regression for others games
2016-05-29 10:13:43 +02:00
Gregory Hainaut a7ba779ba8 gsdx ogl: another HLE channel effect for terminator 3
Same as before but with a different fbmask value (I don't know why but
I have the feeling that I might need the others value too)
2016-05-20 19:55:39 +02:00
Gregory Hainaut 1c21ea955c gsdx ogl: HLE channel effect for terminator 3
Unfortunately I think the game uses another similar effects
2016-05-20 19:45:20 +02:00
Gregory Hainaut d41613c46a gsdx ogl: add a Tales of Abyss HLE shader
Again fast and efficient but it relies on CRC

v2: forget to update the precompiled shader...
2016-05-07 22:46:41 +02:00
Gregory Hainaut d5681ba01c glsl: fix a bug in urban chaos hle shader
Bug only impact the lsb bits of the depth conversion, so impact is likely small
2016-05-07 22:46:41 +02:00
Gregory Hainaut 70ee8c5bc4 gsdx ogl: add an HLE brightness/contrast shader for GT series.
It works and it is very fast. But it relies on CRC

Others effect need to be tested as well
2016-05-07 22:46:41 +02:00
Gregory Hainaut 7c430c9d3c glsl: fix coordinate in channel depth effect
UV can't be used directly in channel effect

Properly fix Urban Chaos smoke
2016-05-04 18:08:40 +02:00
Gregory Hainaut 5676acaef9 glsl: support channel effect on depth texture too 2016-04-30 16:07:45 +02:00
Gregory Hainaut 14e1ed06df glsl: add an HLE shader for Urban Chaos
Pro:
* Replace 140 draw calls into a single one
* No complex texture conversion/lookup
* smaller solution than a generic solution
2016-04-30 14:52:53 +02:00
Gregory Hainaut 7a5e1d4154 gsdx ogl: allow to use a separate texture for the channel effect 2016-04-29 17:34:17 +02:00
Gregory Hainaut c445a14c46 gsdx ogl: extend shader to lookup a single channel 2016-04-28 22:56:38 +02:00
Gregory Hainaut ab31915ce9 gsdx: glsl: fix silly typo
And regression on various games
2016-04-27 09:52:35 +02:00
Gregory Hainaut fda511a949 gsdx glsl: extend hw shader to sample depth texture
Will use integral coordinate to avoid any rescaling.

Bilinear interpolation isn't supported. I don't think it is allowed to
filter a depth texture anyway.
2016-04-24 22:18:26 +02:00
Gregory Hainaut 1558220f74 gsdx glsl: create a common header definition
* avoid duplication between all the files for UBO
* remove various interface define
2016-04-24 10:54:39 +02:00
Gregory Hainaut 17886a9808 gsdx-ogl: allow some accurate date when GL_ARB_shader_image_load_store isn't supported
Close #1282
2016-04-07 19:29:46 +02:00
Gregory Hainaut bc73195193 gsdx-ogl: pack more tightly the FS UBO
Merge TA vec2 + Af vec1 into a single vec4
2016-03-10 18:29:05 +01:00
Gregory Hainaut 9ba470fc63 gsdx-ogl: properly handle t_float in GS
f8c442cf76 misses the swap of t_float in GS

Fix regression in Okami

Bonus: factorize VS_WILDHACK in the VS
2016-02-21 11:48:30 +01:00
Gregory Hainaut f8c442cf76 gsdx-ogl: make VS more generic
Texture coordinate could be dummy/float/int integral/int normalized.

Old behavior:
* VS was in charge to select the texture coordinate
* int integral format wasn't supported

New behavior:
* Always compute all formats
* FS will be in charge to select the good format

Impact:
* VS will be slightly slower but it reduces shaders permutation from
   little to 0 (won't be bad for CPU)
* FS speed isn't impacted as 2 separate code paths were already required
  to support both format
* Rasterizer will be 33% slower but unlikely to be the limited factor of
  the GPU
* In future we could directly use the integral format in the FS.

V2: remove useless PSin_t
2016-02-18 19:02:05 +01:00
Gregory Hainaut a8968257db glsl: keep fract in [0;1] range
Shin Megami Tensei Lucifers seems to generate infinites values.
I suspect that DX always clamp fract output.

Finally fix #782 !
2015-10-22 18:36:45 +02:00
Gregory Hainaut 92553add8e gsdx-ogl: accurate date regression. Bad interaction between depth & DATE
In the DATE42 algo, first pass must find the primitive that write the
bad alpha value. If depth test is fail, alpha value won't be written therefore
you mustn't keep the primitive id.

In theory to ensure 100% correctness, depth would need to be fully executed
(currently depth write is disabled). However it requires to copy the depth buffer.
It is likely bad for the perf.

Issue reported on DBZInfWorld
2015-10-22 12:31:51 +02:00
Gregory Hainaut 78569ee833 gsdx-ogl: redo properly the setup of texture format
* add lengthly comment to explain the format
* Likely reduce the number of shader permutation
* Avoid slow AEM (on GPU)

Expect regressions because TC needs some fixes

v2: fix palette mode
2015-09-11 14:14:22 +02:00
Gregory Hainaut bfadd884c9 glsl: expand tab into space
The mix of the 2 was awful
2015-08-22 13:34:02 +02:00
Gregory Hainaut a46c11b088 gsdx-ogl: delete various leftovers 2015-08-22 13:33:32 +02:00
Gregory Hainaut 7002ff3ec3 gsdx-ogl: move texture scale from vs_cb to fs_cb
It avoid useless update of the vs_cb.
2015-08-22 13:33:04 +02:00
Gregory Hainaut c5a786ed2c gsdx-ogl: remove support WMS/T == 2 in hardware unit
I think behavior was wrong because only first texel coordinate was clamped.

Beside we can't interpolate if AEM isn't yet applied
2015-08-20 23:01:43 +02:00
Gregory Hainaut 78dd957717 gsdx-ogl: use normalized index coordinate for palette texture
In palette mode, 90% of texture accesses are done in 8 bits.
So let's keep this path as light as possible. It reduces GPU load.
2015-08-20 23:01:43 +02:00
Gregory Hainaut 6b84a89b6a gsdx-ogl: remove old ati hack for point sampler
Was never used on openGL

In the future absolute coordinate will be use anyway
2015-08-18 19:09:45 +02:00
Miguel A. Colón Vélez 21c4e6caa6 Fix things found by lintian.
I: pcsx2: spelling-error-in-binary usr/lib/i386-linux-gnu/pcsx2/libGSdx-1.0.0.so allows to allows one to
I: pcsx2: spelling-error-in-binary usr/lib/i386-linux-gnu/pcsx2/libGSdx-1.0.0.so Allow to Allow one to
.
Apparently lintian checks grammar too (most common ones).
2015-08-17 22:00:07 -04:00
Gregory Hainaut bd0de8fbaf glsl: (colclip) HDR doesn't need wrapping neither clamping
Might save a couple of instruction in the PS
2015-08-08 09:18:09 +02:00
Gregory Hainaut d822b6bd1a gsdx-ogl: add some comments for the future 2015-08-08 09:17:06 +02:00