defdd27987
gsdx: set m_nativeres to true in replayer
...
Otherwise you can't compare draw call between native and upscaled
2016-10-16 16:48:23 +02:00
f5e096a66f
spu2x: indicate pitch modulation and noise enabled status in the visual debugger
2016-10-16 14:15:12 +02:00
c284459382
gsdx tc: allow to search old depth/color in texture cache
...
But give higher priority to recent buffer.
Fix cut scene issue in Jak II (and potentially various game when EE/VU hacks are used)
2016-10-15 18:08:00 +02:00
7bb201a1d2
gsdx tc: move code to allow to lookup an older target if none was found
...
Next step is to enable it by uncommenting line 452
2016-10-14 22:03:29 +02:00
24684033ca
gsdx: enable clut_load_before_draw option on Harley Davidson (CRC hack)
...
At least the game is good until we find how the HW really behave
2016-10-14 20:47:18 +02:00
2c0a4ac906
gsdx ogl: add an extra debug log level
...
Avoid too much log
2016-10-14 20:46:58 +02:00
3c30db965d
gsdx gui: add a combo box on linux (below Interlace)
...
3 states are off/half/full. I'm too lazy to create a better combo box.
The hack option will be removed when Windows GUI is ready
2016-10-14 19:26:58 +02:00
37a1230c01
gsdx: reduce code duplication for key event
2016-10-14 19:26:58 +02:00
a4658eac24
gsdx hw: allow overlapping of texture (alpha) and framebuffer (RGB)
...
Fix HUD on Berserk
v2: use fbmask instead of hacking the target format to 24 bits.
2016-10-14 19:26:27 +02:00
25e76d0564
gsdx ogl: use an invalid value for stencil state
...
Fix shadow in WWE Smackdown Vs Raw 2006
2016-10-14 19:01:18 +02:00
51c64fcbe6
gsdx sw: trick GetFeedbackOutput to handle basic merge loopback
...
It is enough for Xenosaga.
2016-10-14 18:13:20 +02:00
deb2ed3d09
gsdx ogl: reimplement merge circuit to support feedback write
2016-10-14 18:13:20 +02:00
06055add5c
gsdx merge: get a new buffer for the feedback write
2016-10-14 18:13:20 +02:00
317a464278
gsdx shader: RGB => YUV conversion
...
Required for write feedback emulation
2016-10-14 18:13:20 +02:00
6ef5607d99
gsdx shader: add a shader to render text for OSD
...
Gregory: code extracted from the OSD PR to reduce conflict
2016-10-14 18:13:20 +02:00
d84d30fe87
gsdx: Add color component to OGL shaders
2016-10-14 18:13:20 +02:00
7ca9ca9465
gsdx: new parameter for merge virtual function
...
* Add full PMODE register to replace slbg/mmod
* Add full EXTBUF register (will allow to emulate write feedback)
* Add a third source (which will actually be the destination of the
write feedback)
2016-10-14 18:13:20 +02:00
357dcdb55e
GSdx: Move alpha stencil hack back to original location
...
Avoids skipping the alpha stencil hack.
2016-10-14 16:36:17 +02:00
fbf7ccbdda
gsdx: by default new will throw std::bad_alloc
...
So catch/use it and don't bother with GSDXErrorOOM
2016-10-13 20:44:59 +02:00
c440c7c93a
gsdx gui: update the filter combox box with new trilinear options
...
OpenGL only
v2: update setting tooltip based on turtleli feedback
2016-10-13 20:16:38 +02:00
5ced9c1f19
gsdx mipmap:ogl: plug trilinear/mipmap2 option
...
mipmap option 3. Actually maybe a separate tri-linear option will be better
m_mipmap == 2 => use manual PS2 trilinear/mipmap
Otherwise
m_filter == 3 => always use full automatic trilinear interpolation
m_filter == 4 => use automatic trilinear interpolation when PS2 uses mipmap
m_filter == 5 => like 4 but force bilinear interpolation inside layer
2016-10-13 20:16:38 +02:00
c2777ff989
gsdx state: split IsMipmapActive in 2 pieces
...
This way we can test if a draw call requires a triliner filtering.
It will be used in next commit to implement automatic trilinear
2016-10-13 20:16:38 +02:00
1b9b47dd6a
gsdx mipmap:ogl: add capabilities to automatically generate mipmap layer
2016-10-13 20:16:38 +02:00
510eccd471
gsdx mipmap: enable fully tri-linear filtering
...
(when mipmap > 1)
2016-10-13 20:16:38 +02:00
a8a2db8eb1
gsdx mipmap:ogl: extend HW sampler with tri-linear filtering
...
v2:
* use nice enum
* use bilinear info when there is no mipmap (more accurate)
2016-10-13 20:16:38 +02:00
335d7f3ae5
gsdx: add a nice enum for min filter
2016-10-13 20:16:38 +02:00
7ea0e90678
gsdx mipmap:ogl: extend shader to support trilinear filtering
2016-10-13 20:16:38 +02:00
d185a85a07
gsdx ogl: replace simple_sample variable by the opposite shader_emulated_sampler
...
It feels easier to read this way
2016-10-13 20:16:38 +02:00
ae441e6a2c
gsdx mipmap:HW: Update all valid texture layers
2016-10-13 20:16:38 +02:00
5d593dd948
gsdx mipmap:HW: save state of both min&max lod values
2016-10-13 20:16:38 +02:00
15b1d8d3f0
gsdx mipmap:tc: add code to update a single layer of a mipmap
2016-10-13 20:16:38 +02:00
dbb4bdf59f
gsdx mipmap:ogl: add GL_TEXTURE mipmap support
...
* Allocate more memory for extra layers
* Allow to upload data in any layers
2016-10-13 20:16:38 +02:00
76bd968c59
gsdx mipmap: extend texture/cache to support a layer parameter
2016-10-13 20:16:38 +02:00
b695e0065a
gsdx mipmap: use a 3 state option
2016-10-13 20:16:38 +02:00
679f3347bb
cdvdgigaherz: Read raw CD sectors one by one ( #1590 )
...
A multi sector raw disk sector read that reads data from two tracks of
different types will not complete successfully. Reading the sectors one
at a time should fix the issue.
2016-10-10 22:33:15 +01:00
039573b133
clang-format spu2x
...
Note: it doesn't play well with define around forceinline (might need to fix the inline btw)
And a single macro in RegTable.cpp
2016-10-10 20:41:24 +02:00
36631f2270
remove a useless define
...
cosmetics
more cosmetics
some more cosmetics? sure!
whitespaces
whiterspaces
2016-10-09 20:10:53 +02:00
95fe77a594
bad merge fix
2016-10-09 16:15:19 +02:00
19a8ed8b25
psxmode: Spu2x: more native SPU2 reghandlers. first "working" reverb! (everything before was just random data)
2016-10-09 15:52:47 +02:00
ee05137415
psxmode: Spu2x: add reverb register handling, fix a problem with the address translation, re-enable "VMIXEL" writing (which should just be named Echo/Effect ON or EON really)
2016-10-09 15:52:47 +02:00
1ec70f1df3
psxmode: Spu2x now working correctly. Kudos to pseudonym. Took him 30 minutes to fix this!
2016-10-09 15:52:46 +02:00
08b6edae80
psxmode: further spu2x work
2016-10-09 15:52:45 +02:00
3aabc1adbf
spu2x work 1
2016-10-09 15:52:05 +02:00
9af34cc611
gsdx tc: miss a set scaling call
...
Likely impact issue #83/#694
2016-10-09 13:07:08 +02:00
3b733930fe
gsdx: UserHacks_TextureInsideRt must be disabled by default
...
Likely a bad copy/past
2016-10-09 12:13:37 +02:00
344636d88e
gsdx ogl: attach input texture before copy
...
Help to ensure with copy the good texture in debugger
2016-10-08 23:42:39 +02:00
22ebdcf1cf
gsdx debug: create a nice dump function for kernel gs registers
...
Add missing register
2016-10-08 23:42:39 +02:00
ab228c8484
Added missing CRC for Grand Theft Auto San Andreas.
2016-10-08 18:38:50 +03:00
db853b4462
GSdx: Add Jak 2 US CRC to GSCrc list.
...
Fixes issue: https://github.com/PCSX2/pcsx2/issues/1603
2016-10-07 13:14:15 +03:00
574a807678
gsdx tc: new hack to extract texture from rt
...
UserHacks_TextureInsideRt = 1 (don't look at Jak)
2016-10-07 01:43:04 +02:00
8873b27eb8
gsdx: let's keep the new clut option off
...
There are still issue with virtua fighter (albeit my dump is better...)
2016-10-06 22:05:03 +02:00
79666b26c0
gsdx sw: restore the const reference
...
It was removed for PSX hack which was removed a couple of commits ago
2016-10-06 20:02:22 +02:00
c66004bbb2
gsdx: hidden option to better support dual context clut
...
Option is on by default. Just a safety net in case of regression
Fix clut issue on virtua fighter (SW) and harley davidson (SW/HW).
2016-10-06 19:08:21 +02:00
9cd4984f7c
gsdx debug: more log
2016-10-06 18:56:31 +02:00
d827497403
gsdx: let's handle illegal 4 bits format too
...
In doubt if some games use them.
2016-10-05 22:07:49 +02:00
9b93c07339
gsdx: Handle illegal 8 bits format. Found the most silly GS dev trick
...
Fix Berserk #1526 Well done guys but we're more clever than you ;)
So instead to mask the color channels as any guy that RTFM, they decided to use the illegal 8H frame format
2016-10-05 22:07:43 +02:00
6fd46eb36a
gsdx: move the validation of the texture format before the draw call
...
Avoid false positive when game write dummy stuff
2016-10-05 22:07:23 +02:00
a0629587be
gsdx memory: implement read texture of PS GPU24
...
convert the swizzled block as tightly packed 24 bits RGB
Then convert scanline to standard 32 bits RGBA
The HW renderer requires the preload data hack
2016-10-05 21:59:42 +02:00
1c900e780a
gsdx memory: add a PS GPU 24 bits format
...
Same swizzle as 16 bits. But contains tightly packed RGB pixels.
2016-10-05 21:06:38 +02:00
1cc696ab31
gsdx hw: update TEST.ATE field after ATE optimization
...
Otherwise DoFirstPass/DoSecondPass will give you result based on pre-ATE optimization
Close #1607
2016-10-05 09:43:24 +02:00
3653a7746a
gsdx psxmode: small hack to "see" video until we found a better solution
2016-10-05 09:43:24 +02:00
677f890c5c
gsdx debug: static GSState::s_n
...
This way you can access the current draw call anywhere. Very useful for debug.
2016-10-05 09:43:24 +02:00
61333ecb40
gsdx debug: trace register access
...
I didn't include high frequency register such as vertex stuff
main goal is to give the possibility to trace the texture/clut update
2016-10-05 09:43:24 +02:00
1b8d6a38e7
Merge pull request #1586 from PCSX2/gsdx-refresh-gui-options
...
Gsdx refresh gui options
2016-10-04 18:30:48 +02:00
354aa6831b
gsdx ogl: brain hang in the middle of the line
...
Only impact if bilinear is forced
2016-10-03 18:52:02 +02:00
5b72fab2e4
gsdx ogl: depth regression from 866173a481
...
Only mask depth if the min value is too big
Issue #1602
2016-10-03 18:32:54 +02:00
3be055a366
gsdx hw: remove code to detect an effect
...
It was a tentative to emulate GTA radiosity but the new hack is more generic
2016-10-02 18:29:23 +02:00
49c44db635
gsdx:dx: make filtering right
...
WMS/WMT 2 is the region clamping mode.
Hw unit can't emulate it right so it can give you bad filtering (Fix #1025 )
Note: I only did the fix because I wanted to remove the TEXA hack. Otherwise
it is still recommended to use openGL
2016-10-02 18:21:52 +02:00
7f4791fa85
gsdx hw: improve no_ds detection
...
Support ZTST_NEVER as no depth read => psx mode speed boost
Use zm/fm to reduce further depth lookup
2016-10-02 18:21:52 +02:00
c3ac3ecbe7
gsdx hw: move try alpha test at the beginning
...
Will allow to use alpha test optimization to better optimize depth lookup
Require to do clut handling before
2016-10-02 18:21:52 +02:00
dc365e066d
gsdx tc: remove old plain TEXA hack
...
It must work fine without it now.
From the google code comments:
It would be nice to test those games
* Ar Tonelico 2 (line in sprite regression?)
* breath of fire dragon quarter (overlayed user interface in the game)
v2: update Dx code to use the good format
2016-10-02 18:21:52 +02:00
cf13cccb1e
gsdx: avoid useless spamming of INVALID PSM in release build
2016-10-02 18:21:41 +02:00
955a69b16e
gsdx ogl: fix GT4 regression (wrong texture on timing)
2016-10-02 12:16:48 +02:00
c7c6566bca
gsdx hw: of course the full Jak series will kill me
2016-10-02 11:57:09 +02:00
b6638d4eec
gsdx hw: forgot to comment an unused variable
...
Keep the code in case, we better solution is found to validate the depth/frame format
2016-10-02 10:18:15 +02:00
3996fbe365
gsdx hw: reduce conplexity around TryAlphaTest
...
* As sw renderer, don't bother to bypass it when it is ATST_ALWAYS
* Don't update the ATE register value
=> It is a really bad idea. Next draw call will be wrong if TEST register isn't written.
The TryAlphaTest context could have been updated
2016-10-01 19:20:49 +02:00
c5f086b385
gsdx ate: separate the code that depends on TEST.AFAIL
...
Easier to read and allow a switch optimization
Add a shortcut for the common ATST_ALWAYS case
2016-10-01 19:20:38 +02:00
4612b79575
gsdx: add a warning on vertex trace
...
Due to a division by 2, depth lsb bit is always 0
I'm not sure it is critical but let's keep a note for the future
2016-10-01 19:16:44 +02:00
d1e07295e7
gsdx linux: add the missing gui option for unscale point/line primitive
2016-10-01 19:16:44 +02:00
5e1064da55
gsdx: remove the safe accurate blending hack
...
V2: Integrate Flatout patch to do the Window side
2016-10-01 19:15:52 +02:00
f77c1900fa
gsdx tc: always clear a new depth buffer
...
Random data isn't a good idea for a depth buffer. It can cause flickering. (Jak2 FMV)
Hopefully it won't impact too much the speed.
2016-10-01 19:00:17 +02:00
9c84712640
gsdx hw: enable palette read back on Jak2
2016-10-01 18:47:21 +02:00
5d93a392e4
gsdx hw: xman half screen correction
2016-09-30 22:25:24 +02:00
29c25bc375
gsdx clut: disable some assertions often fired
2016-09-30 22:24:38 +02:00
34686394a6
gsdx hw: add an hack for Jak3
...
I'm disappointed...
Read back palette written by the GPU. Avoid strange color on the skin.
2016-09-30 19:22:16 +02:00
df2f8684d6
gsdx: improve TC cache log
2016-09-30 19:18:58 +02:00
8d24aa2b39
gsdx: GoW2 half screen bug
...
... Seriously ...
2016-09-30 19:15:25 +02:00
fc32b749dd
onepad: fix a pad regression on odin sphere
2016-09-30 10:25:14 +02:00
8d4fadb3c8
Revert "gsdx state: TEX0 write behavior might depends on the context"
...
This reverts commit b34243fa7b
2016-09-28 20:00:56 +02:00
90ad9cf668
gsdx hw mipmap: tune the rounding + remove previous hack
...
GS really uses an invalid texture located at 0.
Improve the rounding for R&C. The idea is to avoid the corner case were only
the corner of the triangle touch the 7/16 edge.
2016-09-28 19:41:12 +02:00
adb8be3287
gsdx: add/update comment
...
Need to investigate why the number of vertex is different in upscaled resolution
2016-09-28 19:41:12 +02:00
749037346c
gsdx: report an error if PSM is invalid
2016-09-28 19:41:12 +02:00
fea31f7422
gsdx: don't use virtual when it is useless
2016-09-28 19:41:11 +02:00
97172f5e51
gsdx debug: count draw call in a different way
...
* Always do +1 before the draw call
* Prefix texture name with i (as input) to keep them before the FB
Goal is to ensure that all renderers share the same draw call value.
2016-09-28 19:41:11 +02:00
b34243fa7b
gsdx state: TEX0 write behavior might depends on the context
...
Game: harley davidson
* write tex0 ctx0
* write tex0 ctx1
* draw ctx 0
Previous GSdx behavior will load the clut every write of TEX0. In the
above case the draw will take the wrong clut.
To be honest, it could be a wrong emulation on the EE core emulation.
The hardware likely got a single clut (1KB cache is quite expensive)
So clut loading must be skipped if the context is wrong.
Next draw will use the ctx1 clut so I apply TEX0 when the context is switched
Please test harley davidson :)
v2: detect context switch from UpdateContext function
V3: always set m_env.CTXT[i].offset.tex, avoid crash (Thanks to FlatOutPS2 that spot the issue)
V4: move bad psm correction code (rebase put it in the wrong place)
2016-09-27 10:04:09 +02:00
e0961d81a0
gsdx HW: use after free crash
...
Free bt
3 0xe676d194 in ~Source ../plugins/GSdx/GSTextureCache.cpp:1526
4 0xe676d194 in GSTextureCache::SourceMap::RemoveAt(GSTextureCache::Source*) ../plugins/GSdx/GSTextureCache.cpp:1990
5 0xe676f0fe in GSTextureCache::IncAge() ../plugins/GSdx/GSTextureCache.cpp:1022
Use bt
0 0xe6772a83 in GSTextureCache::LookupSource(GIFRegTEX0 const&, GIFRegTEXA const&, GSVector4i const&) ../plugins/GSdx/GSTextureCache.cpp:204
1 0xe66b0c9f in GSRendererHW::Draw() ../plugins/GSdx/GSRendererHW.cpp:579
2 0xe66fb43e in GSState::FlushPrim() ../plugins/GSdx/GSState.cpp:1509
Hypothesis the m_map array of list contains an invalid pointer
It is populated GSTextureCache::SourceMap::Add based on the coverage. The coverage is based on the offset.
So offset is potentially wrong. As mipmap code hack the offset value. It would be a nice culprit.
This commit avoids a potential bad transition between MIPMAP (which
overwrite the "offset") and the base layer (which wrongly keep an old "offset")
Conclusion, pray for my soul as it is very hard to reproduce
2016-09-26 20:34:38 +02:00
04d82d8127
gsdx: size doesn't count but 0.625 might change your life :p
2016-09-26 19:42:07 +02:00
be9995bd1e
gsdx mipmap: improve robustness to avoid potential crash
2016-09-26 09:27:03 +02:00
ebb2a8ad5a
gsdx debug: Add DISABLE_WIP_ASSERTION
...
To easily disable assertion on codes that only require investigation
2016-09-25 20:00:51 +02:00
ca4f265ce6
gsdx debug: dump mipmap register could be useful now :)
2016-09-25 20:00:51 +02:00
Gregory Hainaut