This way ogl_vertex_storage must be safer to activate
And it brings a nice performance boost (game with lots of primitives and
reasonable upscaling)
SotC testcase 4x: 61fps => 78fps
If there is no overlap, it is allowed to directly read from the render target.
On SotC testcase with 6x scaling: 30fps -> 40fps
Note: it requires GL_ARB_texture_barrier extension so be sure to have a recent driver
Note2: it requires a lots of testing too
Open question: in case of complex date (written alpha)
Will it be faster to split the draw call into multiple call with no
primitive overlap
ogl_texture_storage 1 creates texture corruption.
Advance date is too slow, code need to be updated (properly) to uses 2 passes only not 3
Maybe one could be enough (sometimes)
DATE is implemented in 2 ways.
1/ with stencil
2/ purely in FS (sw)
I kept method 1 to reduce the work on method 2. It sucks for performance.
So it would be either 1 or 2.
Note: DATE has a big impact on higher upscaling
Note2: you can disable the 2nd method with this configuration parameter
override_GL_ARB_shader_image_load_store = 0
Note yet enabled because I'm afraid of data corruption but feel free to test it
The option:
ogl_vertex_storage = 1
Performance note (warm cache+gs replay on colin3)
60 fps -> 76 fps
UserHacks_UnscaleSprite = 1 will unscale flat sprites
UserHacks_UnscaleSprite = 2 will unscale all sprites (don't work well so far)
The idea of the hack is to redo the interpolation of texture coordinate
based on the non-upscaled pixel position.
It avoids various glitches but sprites aren't upscaled anymore (so no
more anti-aliasing, potentially a coefficient can be added).
* separate VS/GS and FS
* separate subroutine part of the FS
It already complex enough without subroutine stuff. Besides I'm not sure
we will keep subroutine on the future.
If someone has a more elegant solution, feel free to share it
spin_thread = 0
spin_thread = 1 // the faster but GS thread will never stop, very bad for laptop
It is faster on linux, it requires less code, and it is "portable"
It requires boost (only hpp files) + MSVC 2013 (for atomic) (seem doable by 2012 too)
Actually there are several queues that either use spinlock or full sleep
* Use tooltip for hack
* Update string of previous hack
* Remove unused hack
Note: hack_sprite_check requires 3 states (and potentially others hack too) but
I don't know how to do it. It likely requires a "scale button"
It works as bad as a "clever" implementation.
It seems to be enough for games such as venus/taisho-monoke/FFX
Note: it might creates glitches. Code will never be nice, so it is just
a trade-off
-1 is annoying because minimum value is 0. Instead to add more logic,
let's try to use 0 which seems to be good enough (fix regressions on DQ8/AT)
Unfortunately it causes a mini regression on taisho-mononoke. Rotation of sprite is done with 2 triangles.
Potentially previous value wrongly recover this section.
Tekken is broken with setting UserHacks_round_sprite_offset = 2 use 1 instead.
=> game use upscaling internaly so my rounding of coordinate break everything
Yakuza uses float coordinate but this hack only correct the integer coordinate
=> the solution will be to add a dedicated hack for this game.
Colin3 got a regression but I don't know when...
PS2 uses a -0.5 offset before sampling so texels must be rounded to half-pixel boundary
If fixes glitches on Venus and taisho-mononoke
Note: I didn't fixed yet texture render in reverse because I don't have any test for it.
UserHacks_round_sprite_offset = 1 <= enable correction of flat sprites
UserHacks_round_sprite_offset = 2 <= enable correction of all sprites (better on a couple of dump but not sure of the consequence)
I completely redo the algorithm. This time I do the projection and
interpolation of the 2 extrem vertex. This way I can compute the min/max
valid texture coordinate.
It gives stronger guarantee that texture sampling will be done inside the texture.
However it might have a performance impact, likely reasonable because it
is limited to sprite vertex.
A big thanks you to all people that provide me GS dump and test reports.
It is replacement of the previous hack (UserHacks_stretch_sprite). Don't enable both in the same time!
The idea of the hack is to move the sprite to the pixel boundary. It
avoids most of rounding issue. It also rescales verticaly the sprite (avoid horizontal line on ace combat).
I don't like this rescaling maybe we can limit it to only 1 pixels.
On my limited testcase, results are much better with any upscaling factor.
I still have a bad line in Kingdom heart. If you have issue with others
game please provide us a GS dump.
2x upscaling is pixel perfects. Bigger upscaling is better but not yet perfect
Feedbacks are welcomes (note it doesn't solve all upscaling issue, only wrong texture sampling)
For the history:
If you have a texture of [0;16[ texels and draws a primitive [0;16[
The formulae to sample last pixels of texture is
0.5 + (16*s-1)/(16*s) * 16
Native (s==1): 15.5 (good)
2x (s==2): 16 (bad, outside of the texture)
4x (s==4): 16.25 (bad, really outside of the texure))
+ This is not yet perfect. Really, this standard seems like a load of crap to me in fact...
At least it works now. Should test again when gcc 5 & new c++ libs gets out.. Until then, it will do.
On Linux, CPUs with AVX2 instruction sets that have TSX disabled (by
microcode update or otherwise) fail to build GSdx. The __RTM__ macro is
undefined, with leads to the TSX RTM instruction set (_xbegin, _xend,
_xabort, etc.) being unavailable.
Modify the preprocessor check so that the RTM instructions are only used
if available.
I wanted to play with linux interface :)
It is far from perfect but joysticks are detected. The biggest issue is the correct generation of the config file!
It conflicts with the global definition
I don't remember why this option was set on GSdx. Potentially it could be dropped (or fixed correctly)
Anyway, it will help to enable Address Sanitizer on Linux Build
Tell the user to use CMAKE_TOOLCHAIN_FILE upon failure.
.
Cleanup detectOperatingSystem. Should be the same but adding
GNU and kFreeBSD from Debian and filtering out pre OS X Apple.
.
libaio is linux only. Also check for the correct header since
aio.h is the POSIX one. Both are in /usr/include/ anyway.
Only build core if (Linux AND NOT AIO_FOUND) == false.
.
Use Unix for GTK and X11. Macs has gtk-quartzs and xquartz or native X11.
*BSD, linux, etc should have both.
builds an Utilies_NO_TLS.a archive of the common Utilities code. It replaces native TLS by a slower reimplementation
Rational: number of TLS slot is very limited by the GLIBc on linux. I hope it doesn't impact performance.
* Zzogl don't requires TLS AFAIK
* spu2x will likely use it for assertions only.
TLS exhaustion creates issue to dlopen plugins
issue #384 : https://github.com/PCSX2/pcsx2/issues/384
But also for profiled build (-fprofile-generate)
http://forums.pcsx2.net/Thread-WORKAROUND-build-with-fprofile-generate
If someone have a better idea, please raise your hand!
Description: Building with SDL2_API=TRUE is incomplete
SDL_FOUND does not imply SDL2_FOUND
Use check_libs for detection
Only include ${SDL_INCLUDE_DIR} when needed
Use SDL2_LIBRARIES
Author: Miguel A. Colón Vélez
Gregory: add back SDL_BUILDING_LIBRARY
+ Implement threads/mutex using std::thread/std::mutex/std::condition_variable
+ Old implementation can be used by commenting out the "define _STD_THREAD_ in GSThread.h
+ Commit should be much cleaner than previous one.
Note: of course it requires a glsl shader ;)
On windows, you can set the path on the ini file. Here an example with linux path:
shaderfx_conf = /home/gregory/playstation/emulateur/pcsx2_merge/bin/GSdx_FX_Settings.ini
shaderfx_glsl = /home/gregory/playstation/emulateur/pcsx2_merge/bin/shader.fx
I need to check carefully the consequence of ABI change. So far wx is very unhappy!
Fatal Error: Mismatch between the program and library build versions detected.
The library used 2.8 (no debug,Unicode,compiler with C++ ABI 1002,wx containers,compatible with 2.6),
and your program used 2.8 (no debug,Unicode,compiler with C++ ABI 1006,wx containers,compatible with 2.6).
Copy the full line into the pbo. Dma will only take GL_UNPACK_ROW_LENGTH
- increase memcpy size by 2 in the pbo
+ single memcpy will be faster and can use sse
Enable buffer_storage extension:
* GL_CLIENT_STORAGE_BIT was required (it is the duty of TexSubImage to copy data into the GPU mem)
* Enable the extension by default
Null is equivalent to a clear to 0.
Note: Code is not yet used because both stencil and depth are cleared.
Future note: stencil can potentially be replaced by load_store_image
* Don't use the stack
* Don't compare MinMax parameter (depends of others)
* Don't store not-compared parameter in the cache (HalfTexel/MinMax)
+0.3fps/46fps (well better than nothing)
* Only a single VAO
=> Format is set once
=> Only a single bind at startup
=> GSVertexBufferStateOGL is nearly useless
=> barely faster but better than nothing :)
A couple of fallbacks were introduced for the Mesa driver that only support 3.0
DSA will require a recent Mesa which already support GL3.3
Require at least SandyBridge for Intel GPU
* use DebugOutputToFile as a callback of gl error. Add a breakpoint to
find the culprit GL call
* use string instead of char[n]
Note: CheckDebugLog is potentially useless now
* GL_ARB_clip_control: reduce z fighting
* GL_ARB_clear_texture: no real speed gain (but improve code quality)
* GL_ARB_bindless_texture: +1fps (if you're CPU limited)
* link common with c lib (required for gold linker)
* fix the macro to properly set the library variable
=> use the variable instead to hardcoded value
* require a 3.1 context
* unattach texture of the fbo when they're not used
(avoid to have a texture and depth_stencil with different size)
Note: except minor shader bug it works on Nvidia 340.23.01
Fixes RPMLINT warning:
pcsx2.i586: W: file-contains-date-and-time /usr/bin/pcsx2
Your file uses __DATE and __TIME__ this causes the package to rebuild when not needed
The non-stdint fallback was not even working which shows that it was never used. No supported platform would not have stdint anyway.
Remove unused code and do not restrict types to Linux and MSVC. Was there a reason for this?
* Manually cast WxGetTranslation
* Accept string as format parameter of pxWindowTextWriter
* Manually convert wxString to wide string
Note: Wx setup.h is not the same between Debian and Arch. Unfortunately it
generated various compilations errors on wx code.
Close issue #172
This doesn't update the file to the latest version from mingw32 since this is already a custom header stripped from mingw32.
This also fixes the functions for x86_64(verified that it still works for both architectures) and also updates the version inside of GSdx.
Also removes a comment in the GSdx header saying that these functions are broken since they no longer are.
deassert gsopen_done before delete the gs object. Compiler and CPU will
reordonate the store (or not because it is a global variable). Probably not
perfect but better.
Got a crash on GSKeyEvent which I guess wasn't thread safe. So let's ensure
gs is open.
There is no such thing as MGS3 Substance only Subsistence. Substance is MGS2 :P
Also this new CRC is US Disc 2 of Subsistence. The blue stripes should be fixed now I guess.
1/ initReadFifo will be first called on the GS thread
(openGL can only be done on the GS thread)
2/ readFifo will be called on the EE thread. It is not safe too access eeMem from GS
because of memory is virtual
Fix "recent" regression (crash) on Kingdom heart and others game too.
v2: add a len check on GSState::InitReadFIFO
1. After ALT-Tab to another window and back, now it accepts PCSX2
shortcuts properly (e.g. Esc or F6 etc) - focus changes were not
always recognized before.
2. If Lilypad is set to capture mouse, now it releases it on Escape. This
part is a small hack because the code looks as if it should handle it,
but in practice doesn't. This adds explicit uncapture on Escape.
* Fix to create a 3.0 GLES context
* set a default precision to fix most of shader compilation issue
* Crash later because of GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT
=> need to test opensource driver
Remains 3 files that I don't know the source
pcsx2/windows/DwmSetup.cpp: *No copyright* UNKNOWN
pcsx2/windows/SamplProf.cpp: *No copyright* UNKNOWN
pcsx2/windows/VCprojects/IopSif.cpp: *No copyright* UNKNOWN
Remains 1 files in common that I don't know the source
common/include/comptr.h: *No copyright* UNKNOWN
Remains too much files in plugins that I don't know the source :(
Other instances of "svn" in filenames and such remain, but they are not high priority and I didn't want to mess with updating all the project systems.
Closes#19.
Add the --gles build option to the linux main script
Ifdef all gl code not supported on gles3 (note some will be reenabled for gles3.1)
Note: it probably doesn't run anymore. My Nvidia driver doesn't support
yet egl/gles so I can't test it. Feel free to contribute.
A bit slower. Maybe because SubData does the copy in the driver thread. My memcpy is done on
the main thread. I'm not sure it would worth an extra thread to copy vertex data to the GPU
Note: testers are welcome. You need to edit the ini file.
"ogl_vertex_storage=1" <= enable the extension
"ogl_vertex_storage=0" <= disable the extension
Again you need the support of GL_arb_buffer_storage (i.e. not catalyst)
Improve arb_buffer_storage implementation
Try harder to align the texture buffer
Strangely arb_buffer_storage is 3 times slower on my PC (nvidia)
Tester are welcome! Open the ini file
"ogl_texture_storage = 1" <= enable the extension
"ogl_texture_storage = 0" <= disable the extension
Note: you need an opengl 4.4 driver or one that support arb_buffer_storage (i.e. not catalyst)
This hack was used because GSReadFifo was called from the EE thread.
Previous commit move the call to the GSThread.
Hopefully avoid flushing the full GPU contex would improve openGL
performance (at least avoid some hiccups ;) )
Note: newer GSdx ogl won't be compatible with older PCSX2
Crashfix for a weird GIF_FLG_IMAGE2 situation in Wallace and Gromit Project Zoo. Needs further investigation.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5912 96395faa-99c1-11dd-bbfe-3dabce05a288
reduce_gl_requirement_for_free_driver => set it to 1 to only required a 3.0 context (you still required the good extensions)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5910 96395faa-99c1-11dd-bbfe-3dabce05a288
Reformatted fx files that were causing issues on certain text editors. They should now display correctly in those editors.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5897 96395faa-99c1-11dd-bbfe-3dabce05a288
Also removed the fallback recovery ps, and replaced the compile fail catch to a simple console print. Which I think is safer, and faster.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5894 96395faa-99c1-11dd-bbfe-3dabce05a288
UserHacks_AlphaStencil will take precedence on override_GL_ARB_shader_image_load_store
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5891 96395faa-99c1-11dd-bbfe-3dabce05a288
Note: DATE is used for shadows (persona 3) and others effect
You can disable it when you disable gl image extension (override_GL_ARB_shader_image_load_store = 0)
You can also enable it on AMD too (set it to 1 this time) but no guarantee.
If you feel the extension is too slow, you can try disable some gl barrier (aka "damn the torpedo full steam ahead!").
It can be done with the option UserHacks_DateGL4 = 1. Otherwise just disable the extension.
Note: don't enable UserHacks_AlphaStencil in the same time. GL_ARB_shader_image_load_store is an alternative implementation.
Enabling both in the same time will lead to undefined (well surely wrong) behavior.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5890 96395faa-99c1-11dd-bbfe-3dabce05a288
* properly detect gl nv depth extension
* Always show the hack on the gui. Add a new hack option for DATE (gl4.2) only
* Save the scan mode on linux too (f7)
* hopefully fix some crash on some drivers... (ensure aligment 256 bits alignment, and if not use std memcpy)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5888 96395faa-99c1-11dd-bbfe-3dabce05a288
Also disabled the gsdx AF options for the OGL renderer (because it's not implemented for that yet).
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5881 96395faa-99c1-11dd-bbfe-3dabce05a288
Fixes a small oversight on my part. Which was setting the maximum anisotropy to (0,1,2,3,4) respectively, instead of (1,2,4,8,16). So when you selected x16 for example, you were actually only getting x4 >.>
Corrected now, and you will be getting the full x16 when selected :)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5879 96395faa-99c1-11dd-bbfe-3dabce05a288
Adds anisotropic texture filtering (1x-16x) to the hardware settings. Enhances the visual quality of textures that are at oblique viewing angles.
Anisotropic filtering is automatically disabled if: 8-bit textures are enabled.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5878 96395faa-99c1-11dd-bbfe-3dabce05a288
As before: use the hotkey(f7) to switch between them. It will now save the chosen scanline effect, instead of always defaulting to disabled, on load.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5874 96395faa-99c1-11dd-bbfe-3dabce05a288
* gui refresh
+ Use some tab to reduce heigth for small screen
+ Add logz option
+ remove broken/experimental keyword. GSdx ogl is not too bad ;)
* autodetect GL_NV_depth_buffer_float
Linux tester you are welcome!
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5862 96395faa-99c1-11dd-bbfe-3dabce05a288
Best setting if you driver support GL_NV_depth_buffer_float => GL_NV_Depth = 1 & logz = 0
Otherwise => GL_NV_Depth = 0 & logz = 1
Explanation of the bug:
Dx z position ranges from 0.0f to 1.0f (FS ranges 0.0f to 1.0f)
GL z Position ranges from -1.0f to 1.0f (FS ranges 0.0f to 1.0f)
Why it sucks:
GS small depth value will be "mapped" to -1.0f. In others all small values will be 1.0f! Terrible lost
of accuraccy.
The GL_NV_depth_buffer_float extension allow to set the near plane as -1.0f.
So
"GL z Position ranges from -1.0f to 1.0f (FS ranges 0.0f to 1.0f)"
will become
"GL z Position ranges from -1.0f to 1.0f (FS ranges -1.0f to 1.0f)"
and therefore
"z posision [0.0f;1.0f] will map to FS [0.0f;1.0f]" as DX
Yes we just get back all precision lost previously :)
However you need hardware (intel?) and driver support (free driver?/gles?) :(
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5860 96395faa-99c1-11dd-bbfe-3dabce05a288
* use same path as game index db for cheats and cheats_ws
* install the new cheat zip file on cmake and debian installer
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5850 96395faa-99c1-11dd-bbfe-3dabce05a288
This fixes the crashes on F9 for me. We don't want to call GSgetTitleInfo2() when GSOpen() isn't finished yet.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5834 96395faa-99c1-11dd-bbfe-3dabce05a288
WinXP should be exempted from Portaudio as the default for now.
It has a large latency with DirectSound compared to direct use and XA2 isn't available at all.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5823 96395faa-99c1-11dd-bbfe-3dabce05a288
The preferred audio output module is PortAudio, so making it the default under Windows now (it is already on Linux).
It will use wasapi mode with the default sound device by default, both are configurable though.
This setup gives us better latency and a higher time stretch polling frequency, resulting in better quality overall.
With this we can also lower the main latency default from 150ms to now 100ms.
There is no error checking for the wasapi mode selection yet, as I don't know how this should be done.
Help would be appreciated (gigaherz!) :p
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5821 96395faa-99c1-11dd-bbfe-3dabce05a288
HTB123 on our forums came up with a hack that removes the broken main character shadow in hardware rendering
in SMT Nocturne.
This should work for all GSdx recognized versions / regions of the game (tested EU and NTSC-U).
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5819 96395faa-99c1-11dd-bbfe-3dabce05a288
* restore the old fxaa (Asmodeam will be integrated when I got time)
* port the recently added new scanline algo
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5818 96395faa-99c1-11dd-bbfe-3dabce05a288
Add another scanline algorithm, made by pseudonym. This one is pretty fancy, using a cosinus function for generating the dark lines.
It only works on unscaled output, so use software rendering or native resolution for hardware.
It's an effect that works best on 240p converted games (like the SNES titles in Mega Man Collection).
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5812 96395faa-99c1-11dd-bbfe-3dabce05a288
Finish up my scanlines attempt. Now the 2 old shaders are back in and all 3 cycle on F7.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5809 96395faa-99c1-11dd-bbfe-3dabce05a288
cmake: don't strip by default the binary in release mode
gsdx: disable the regeneration of ogl shader
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5806 96395faa-99c1-11dd-bbfe-3dabce05a288
Slight adjustments to positions in the GUI also (OCD'd the spacing a little :P)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5796 96395faa-99c1-11dd-bbfe-3dabce05a288
- FXAA shader replaced by Asmodeans shader suite 'PCSX2 Fx 2.00 Revised'.
This is an entire enhancement suite with many configurable options like FXAA, texture sharpening
or lighting tweaks. Some of the effects are pretty advanced so kudos to him allowing it to be integrated with GSdx! :)
Note that there's no interface for the tweaks yet. Until those are done, the defaults will be used.
Release thread here: http://forums.pcsx2.net/Thread-Custom-Shaders-for-GSdx?pid=334766#pid334766
- Disabled an option from the widescreen patches for SH:Shattered Memories.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5793 96395faa-99c1-11dd-bbfe-3dabce05a288
* allow to control the gl dectection from the gui (+1 for the user-friendliness ;) )
* disable geometry shader by default on Intel driver
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5783 96395faa-99c1-11dd-bbfe-3dabce05a288
Added a check box and config code for the fxaa shader.
It's not currently hooked up since the shader setup might get replaced in a day or two.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5777 96395faa-99c1-11dd-bbfe-3dabce05a288
Added a simple scanlines filter (2nd one activated by F7). No tweaking done yet.
It shows how to get scanlines that aren't affected by input resolution or scaling.
A good next step would be determining the exact number of dark lines to show :)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5770 96395faa-99c1-11dd-bbfe-3dabce05a288
Removed some missing headers from the vs2010 and vs2012 project files that were causing vs to always claim the projects were out of date.
Also removed some other entries for c/cpp files that were disabled but also missing (I did not search exhaustively).
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5763 96395faa-99c1-11dd-bbfe-3dabce05a288
(Did this through the google code file editing so if it's broken i apologise :P )
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5762 96395faa-99c1-11dd-bbfe-3dabce05a288
* new option SDL2_API
* drop GLSL_SHADER_DIR. Useless, shaders are embedded in .h file
* use some hardening flags (for the moment only basic one)
onepad:
* port the code to SDL2 (Note only SDL1 is supported for the moment)
* improve detection of button vs axis (long-standing issue)
* avoid potential overflow on mouse mouvement detection
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5756 96395faa-99c1-11dd-bbfe-3dabce05a288
* try to use more subroutine on VS&PS, unfortunately hit a driver crash!
* Call Attach/DetachContext through GSDevice so I can unmap currently mapped buffer
* Implement glsl part of GL_ARB_bindless texture, again hit another driver crash!
* various fix of GL_ARB_buffer_storage. Basic benchmark show only improvement on 'cold' case, I guess it will improve smoothness
* try to fix GL_clear_texture, no success so far. It seem the extension is limited to basic texture (aka no depth/stencil)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5752 96395faa-99c1-11dd-bbfe-3dabce05a288
Next commit will include some cleanups, and I'll probably also remove the dynamic-tunning and related support code (not a lot of code though, but.. it's currently unused). I'm also considering completely removing the old stretcher from the code, such that both dynamic-tunning and the old stretcher will only live in SVN history.
Meanwhile, you can test this patch and report back here if you notice a difference. BTW, on my system I use the portaudio output since IIRC it offers the lowest latency.
As before, to display stretcher messages at the console, enable underrun/overrun messages at the SPU2X debug UI (which is also available on normal builds).
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5729 96395faa-99c1-11dd-bbfe-3dabce05a288
Performance note, it might be faster to replace the MODULO with an AND. Not sure on the impact
for the new time stretcher algo.
GSdx: fixed use-after-free (linux)
PCSX2:
* add a define to support address sanitizer (both rely on 0x20000000-0x3fffffff memory ranges..)
* sio_buffer out of bond (-1). Maybe we can move the flush in the 2 if previous branch. It would
avoid the extra test.
* wxGetEnv (linux) generates double free (maybe not thread safe). Cache the result so it doesn't crash
anymore when switching renderer
Comment/Review/Improvement are welcome :)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5727 96395faa-99c1-11dd-bbfe-3dabce05a288
* GL_ARB_shader_subroutine for perf
fix for nvidia => add missing shader declaration. Nvidia got +4fps on colin3 :)
For the moment only 2 PS parameters are supported. Code need to be extended to support others games that often
switch shader program (like xenosaga).
require GL4 class hardware and the option override_GL_ARB_shader_subroutine = 1
Note: strangely on AMD linux it is slower!
* GL_ARB_shader_image_load_store for accuraccy (Date)
Use a signed integer texture and reenable color buffer writing
Current status: Amagami_transparency.gs & P3_battle_shadows.gs are now working on Nvidia with a small perf impact.
Current implementation detail:
1/ setup the standard stencil as before
2/ on remaining pixel, draw once to compute first primitive that will write a fail alpha value.
3/ final draw based on primitive id of step 2
Note: I think we would get a bad behavior if depth test&mask are enabled on step 2/3
Note2: on my limited testcase the perf impact was on CPU. It would be possible to merge step1&2 to nullifying it (could
even be faster actually), however it would require more GPU power.
Again require GL4 class hardware. And the option UserHacks_DateGL4 = 1
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5725 96395faa-99c1-11dd-bbfe-3dabce05a288
zzogl: fix memory leak (fix#1431, #1432)
GSdx ogl: disable geometry shader on Nvidia/Windows (I will wait a 3rd implementation to find which one is correct)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5724 96395faa-99c1-11dd-bbfe-3dabce05a288
* redo most of the texture upload (PBO): colin3 benchmark: 32 fps now (vs 26 fps 2 weeks ago)
* use the cross vendor vsync extension on linux (previous wasn't supported by nvidia)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5721 96395faa-99c1-11dd-bbfe-3dabce05a288
* some preliminary work to test/benchmark bindless texture in the future (glsl was not yet updated)
Bindless texture allow to get a GPU texture pointer and then set it directly
to the shader as a basic uniform.
=> no more texture unit selection/validation
=> no more texture validation neither texture hash lookup
3rdparty: update gl header to the latest gl4.4
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5720 96395faa-99c1-11dd-bbfe-3dabce05a288
Card that support gs:
remain only a gs to generate sprite from a line. Even dummy gs are costly for the GPU.
Card that don't support gs:
remove useless copy of color for line and triangle primitives
Note for dx: opengl 3.2 (maybe not gles) supports both flat interpolation
convention (GL_FIRST_VERTEX_CONVENTION or GL_LAST_VERTEX_CONVENTION). It might
be possible to shuffle vertex index to put the last vertex in first position.
- buff[0] = head + 0;
- buff[1] = head + 1;
- buff[2] = head + 2;
+ buff[0] = head + 2;
+ buff[1] = head + 1;
+ buff[2] = head + 0;
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5718 96395faa-99c1-11dd-bbfe-3dabce05a288
The idea was to replace shader program swith by pointer function calls inside
shaders. At least parameters that are often changed between draw call. So far
I only ported atst and colclip. Unfortunately code is "slower" (on GSdx standalone).
For the moment keep the code but disabled.
If I understand well the validation of program is done in the "driver thread"
but the additional call are done in the overloaded MTGS thread. Apitrace
profiling shows faster GPU draw calls. Another possibility is that the driver still
need to validate the draw call because of others state change.
Here some stats on colin3 (90 frames):
without subroutine: UseProgram 125246
with subroutine: UseProgram 2906, subroutine 125945 => 3605 extra calls overhead (not
all parameters are ported to subroutine)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5715 96395faa-99c1-11dd-bbfe-3dabce05a288
Note: I think we can do the same on DX11
Perf wise: on colin mcrae 3 it reduces shader prog setup from 3005 to 2086 each frames. It saves 2 ms of CPU processing (27->29fps)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5714 96395faa-99c1-11dd-bbfe-3dabce05a288
* move most of gl states into a separate namespace. Extend it to depth/stencil/blend micro state
=> save 10,000 opengl call by frame for colin mcrae 3
* Only setup blend state of first drawbuffer
* Don't request anymore a debug context on dev/release build
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5713 96395faa-99c1-11dd-bbfe-3dabce05a288
* clean extension management and fix compilation of previous gl44 code.
* Use pixel buffer object to upload texture data.
=> avoid crash on AMD driver
=> a bit faster and probably got some margins for the future
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5712 96395faa-99c1-11dd-bbfe-3dabce05a288
* preliminary work for GL4.4 extensions (ARB_clear_texture & ARB_multi_bind). Disabled until I got a 4.4 driver
Note: I plan also to use ARB_buffer_storage
* compute texture gl option in the constructor (avoid a couple of swith case)
* redo texture unit management. Unit 0-2 for shaders, Unit 3 for texture operations. MultiBind will allow to bind
shader input without disturbing texture binding points.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5711 96395faa-99c1-11dd-bbfe-3dabce05a288
* add a non-working hack: UserHacks_DateGL4, goal was to replace UserHacks_AlphaStencil
+ Detection of good/bad samples is based on primitive ID variable. However I'm not sure
the behavior is always the same between draw call...Anyway let's keep a copy of the current
work
* Dump integer texture into text csv
* add gl4.2 ARB_shader_image_load_store extension (needed by UserHacks_DateGL4)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5707 96395faa-99c1-11dd-bbfe-3dabce05a288
* allow to switch renderer with F9
* skip first frame in stat of the replayer
* drop msaa. Fxaa and internal resolution will do the job
* move texture attachment from texture object into device object (allow to keep sanely the state)
* split the write buffer and attachment setup
* completely split sampler and texture input setup
* redo GSDeviceOGL::CopyOffscreen to avoid an extra copy.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5704 96395faa-99c1-11dd-bbfe-3dabce05a288
* use gles header file, disable opengl code (mainly GLX, ARB_sso, geometry shader)
* Define properly the function pointer, GLES use basic linking whereas GL must get the symbol dynamically
* cmake: properly search and set libglesv2.so
* don't use dual source blending => HW renderer work (only miss unimportant FBA)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5701 96395faa-99c1-11dd-bbfe-3dabce05a288
* uniform was wrongly set before the activation of the program (free driver only)
* Always use only 1 drawbuffer. Easier besides previous setup was wrong for convert:ps_main1
GLES trial (v3):
* add the cmake option GLES_API. Note library (libgles) are hardcoded for the moment
* Disable opengl check
* Disable gl_GetDebugMessageLogARB not supported!
* Emulate gl_DrawElementsBaseVertex, add manually the index offset (surely slow but work)
* Fix hundred of shader error (no implicit cast of integer to float...)
Unfortunately GLES doesn't support dual blending so no blend in hardware renderer. Otherwise it is fine
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5700 96395faa-99c1-11dd-bbfe-3dabce05a288
* replace vertex interface with block interface. It avoid to depends on the ARB_sso extension.
* disable geometry shader on Nvidia & Linux. Slower but better than a black screen !
* default logz to 1, avoid some glitches.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5699 96395faa-99c1-11dd-bbfe-3dabce05a288
* redo glsl2h.pl script to generate only one big glsl headers.
* fix gcc warning in GSVector.h
* fix memory leak of GSDeviceOGL.m_shader
* clean shader compilation function => split generation header & drop malloc stuff
cmake:
* only rebuild shader when asked by the use. Avoid perl dependency to build pcsx2
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5698 96395faa-99c1-11dd-bbfe-3dabce05a288
* remove the possibility to compile shader from file. Some people loads older shaders...
The feature might be readded later
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5697 96395faa-99c1-11dd-bbfe-3dabce05a288
* try to setup advance gl context attribute. If driver doesn't support it fallback to the default.
zzogl:
* use glsl2h to generate an header shader as GSdx. Much easier to install
* Get GSUniformBufferOGL & GSVertexArrayOGL speed improvement from GSdx
cmake:
* detect current gcc version. Yield a warning if < 4.7 or an error if < 4.5
glsl2h:
* support zzogl too
* compute md5sum to avoid useless relink
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5696 96395faa-99c1-11dd-bbfe-3dabce05a288
* remove unused variable
* move static function from h into cpp
* Initialized hw_by_page to 0xFFFFFFFF instead of -1 (number must be a positive integer)
* Use a s32 fore m_current_lsn instead of u32 (use -1 as error code)
Bonus: a couple of fix for clang compiler (doesn't mean that it fully compile with clang)
* remove useless __debugbreak on linux
* use short for 16bits atomic function
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5695 96395faa-99c1-11dd-bbfe-3dabce05a288
* remove iconvert.cpp not used anymore
* change copyrigh header from GPL to LGPL. Those 2 files are only basic .h. 1 licence by plugin is enough ;)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5691 96395faa-99c1-11dd-bbfe-3dabce05a288
* fix shader compilation on Nvidia (broken on r5682)
* fix various memory leak thanks to Valgrind
Cmake: fix a minor typo
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5688 96395faa-99c1-11dd-bbfe-3dabce05a288
* use svnrev.h on linux too
* replace sprintf_s with snprintf (hope it still compile on Windows)
* init integer with 0 instead of NULL
* various int -> u32/uint32/uint on for loop index
* remove a couple of unused variable
* init few variable
* disable unused warning results
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5683 96395faa-99c1-11dd-bbfe-3dabce05a288
* Separate state and shader compilation into separate function
* replace various hash_map by basic array
* Compact VertexScale and offset into a single vec4
* add the new option "ogl_vertex_subdata": subdata is faster on FGLRX, test are welcome on Nvidia drivers
0 => use map/unmap
1 => use subdata
replay: add "linux_replay" option and compute some nice stat (mean, standard deviation)
cmake: recreate shader header at build time
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5682 96395faa-99c1-11dd-bbfe-3dabce05a288
* don't delete the wnd in GSclose. It can still be used later
* Properly detect the GL_ARB_gpu_shader5 extension for Fxaa
* A couple of fix in Create (GSopen1) of GSWndEGL/GSWndOGL
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5674 96395faa-99c1-11dd-bbfe-3dabce05a288
* add exception in GSWndEGL and GSWndOGL
* Try to use EGL when GLX failed => you don't need any flags for the opensource driver ;)
cmake: don't install anymore the glsl shader
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5671 96395faa-99c1-11dd-bbfe-3dabce05a288
gsdx:
* move gl function loading into GSwnd. Clean the header and avoid to rely on macro.
* Always require libegl for GSdx. You still need to select the API at compilation.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5670 96395faa-99c1-11dd-bbfe-3dabce05a288
* update linux dialog: create a custom shader box and put it Shade boost and Fxaa
* force the reloading of the inifile after any configuration update.
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5666 96395faa-99c1-11dd-bbfe-3dabce05a288
Now the brach is ready to be merged :)
Dears Window users. If you can test that:
1/ still compile
2/ still running on DX
3/ can run with opengl
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5663 96395faa-99c1-11dd-bbfe-3dabce05a288
* Don't write color during stencil. Keep the old method to ease debug
* Realign date shader on DX
* keep stencil ref to 1. Reduce stencil management burder
* Fix texture pitch (was in pixels but need bytes). Fix Bleach Blade Battlers 2. Thanks Miseru for your trace
Remember note:
fxaa -> not yet implemented
msaa -> not implemented (I might drop it actually)
8 bit texture -> not yet implemented
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5657 96395faa-99c1-11dd-bbfe-3dabce05a288
* detect Advanced Micro Devices for newer AMD Card...
* Mess with coordinate for StretchRect. Upscaling seem to work now. Surely the biggest diff between ogl and dx...
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5655 96395faa-99c1-11dd-bbfe-3dabce05a288
* factorize sample object creation
* remember frame buffer attachment state
* Use a basic context on EGL. Allow to use Mesa 9.1 on AMD GPU.
* precompile vertex and geometry shader to avoid benchmark polution on replay
* Try harder to detect FGLRX driver on window
* various clean
Remain to fix the coordinate system for upscaling
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5651 96395faa-99c1-11dd-bbfe-3dabce05a288
* Fix shader alpha issue. Hoppefully fix lots of glitches.
* Use glBufferSubData to upload data into the constant buffer instead of map/unmap. More fps :)
* Fix wrong api setup on EGL
* Be more portable on glsl2h
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5650 96395faa-99c1-11dd-bbfe-3dabce05a288
- changed the KH2 fix in GetTextureMinMax to my taste, should give the same results, when the used texture rect is to the left/above the clamped area, it returns [min, min+1], and [max-1, max] for right/below
- m_mem.m_clut.Read32 was returned to its original place from GetAlphaMinMax
- UserHacks_WildHack was moved up to GSState, special UV handlers are only used when this setting is active
- updated xbyak to the latest available (avx2 seems incomplete, the 256-bit promoted old instructions are missing)
- changed vtune's include path to the 2013 edition
Some other not yet commited changes from a year ago:
- WriteImageX overflow crash-fix
- moved colclamp after dithering (sw mode), it makes more sense, no visible changes noticed
- Gif_Tag::analyzeTag(), there was a conditional I didn't like, split the loop into two parts
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5649 96395faa-99c1-11dd-bbfe-3dabce05a288
* clean texture management & use different texture unit for various texture operation
* separate sampler and texture setup
* Always disable GL_SCISSOR_TEST before any cleaning to be sure the all pixels are reset
* properly set upscale_multiplier in the linux gui (was mixed with msaa). Unfortunately it is still broken...
* Fix EGL with GSopen1
* Use stdcall for function definition in the replay (avoid segmentation fault)
* Directly use gl_Position in shader instead of an extra user defined variable
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5648 96395faa-99c1-11dd-bbfe-3dabce05a288
* replace most OGL_FREE_DRIVER with a dynamic detection. Remains the context creation. Closed drivers need 3.3
* Add the CopySubImage fallback
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5647 96395faa-99c1-11dd-bbfe-3dabce05a288
* Emulate Geometry Shader from the CPU.
* add some option to override opengl extension detection
* redo shader interface (again) to compile on the free driver
SW renderer is now working on the free driver.
To test it on your linux box use this cmake option -DEGL_API=TRUE
Note: (need opengl 3.0) I test mesa 9.2 git
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5646 96395faa-99c1-11dd-bbfe-3dabce05a288
* fix a bad interaction when GL_ARB_SSO is supported without GL_ARB_shading_language_420pack
* try to replace struct with flat parameter in glsl interface
=> with some hacks of the free driver, I was able to compile SW renderer shader. Unfortunately
the rendering is broken. Maybe my hack :p
* remove EGL context check (wasn't working as expected)
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5644 96395faa-99c1-11dd-bbfe-3dabce05a288
* fix wrong interaction when both GL41 or GL42 aren't supported
* Add a new define to downgrade opengl requirement to test the free driver and EGL
=> As far as I can tell, they only miss geometry shader& GLSL150 (got GLSL140)
* Found a way to avoid crash in AMD driver. Skip the upload of small texture but rendering is wrong now...
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5643 96395faa-99c1-11dd-bbfe-3dabce05a288
* remove an old&useles dummy geometry shader (was used to workaround amd bug)
* use a basic X11 window for GSopen1
* redo the replayer: it is now based on dlopen rather than standard static/dynamic library. AMD driver doesn't play nicely with the later...
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5639 96395faa-99c1-11dd-bbfe-3dabce05a288
* replace both DISABLE_GL41_SSO and DISABLE_GL42 macro with a dynamic check based on the extension support
* glsl2h: use static instead of extern
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5636 96395faa-99c1-11dd-bbfe-3dabce05a288
* add a perl script to convert shader to char*
* By default use *.glsl file (handy to do some trials).
Only drawback, glsl2h need to be manually called at the moment
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5632 96395faa-99c1-11dd-bbfe-3dabce05a288
* workaround AMD driver bleding issue (got at least a nice rendering in GoW)
* would run on the opensource driver when they support geometry shader
Stil got some crash on the driver. Arg!!!
FGLRX user if you want to do some trials
uncomment #define DISABLE_GL41_SSO in GSdx/config.h
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5630 96395faa-99c1-11dd-bbfe-3dabce05a288
* Use bigger index for Uniform buffer to avoid any collision with sampler.
* add a new config to disable openGL 4.2 requirement. Would be done at runtime later.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5620 96395faa-99c1-11dd-bbfe-3dabce05a288
It wasn't the suspicious code, that actually seems to be correct. The rempty() case should now be unnecessary except in case of bad register settings, but that's outside of our control so it needs to stay until code's added for that case. A console warning would be appropriate.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5612 96395faa-99c1-11dd-bbfe-3dabce05a288
* bump minimal requirement to opengl 2! Basically any Dx9 class hardware. On intel you will need a gen4+ GPU.
* remove the bad quality integer texture to use only texture float. Again need an gen4+ Intel GPU. Opensource users: Mesa must be built with support of texture float (stupid patents)
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5603 96395faa-99c1-11dd-bbfe-3dabce05a288
VS2008 is harder to do as there is no automatic downgrader tools for the solution files, sorry.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5602 96395faa-99c1-11dd-bbfe-3dabce05a288
Changed the stack init hack so it is consistent on plugin resets and removed a part of it that broke OPL.
Hopefully this works for all use cases, but we should fix the initial problem anyway.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5601 96395faa-99c1-11dd-bbfe-3dabce05a288
WinPcap version is 4.1.2 and only the /include and /lib folders of their developer pack are included.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5599 96395faa-99c1-11dd-bbfe-3dabce05a288
Most of the work done by Rama, I just integrated the vcxproj.
Only done for vs2010, vs2008 or vs2012 will have to wait.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5595 96395faa-99c1-11dd-bbfe-3dabce05a288
* port KrossX patch from r5556 to openGL
* add a basic gui entry, would love an additional description
* also add the pointsampler hack but don't activate it yet
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5570 96395faa-99c1-11dd-bbfe-3dabce05a288
Should fix the VS2012 project files for when only VS2012 (and not VS2010) is installed.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5557 96395faa-99c1-11dd-bbfe-3dabce05a288
* Don't try to allocate a "null" array when shader log is empty
* glsl: hopefully implicit cast error on Nvidia driver
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5542 96395faa-99c1-11dd-bbfe-3dabce05a288
* initialize the context status variable that take care of some startup hang
* cmake: don't link and compile EGL when it isn't requested
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5528 96395faa-99c1-11dd-bbfe-3dabce05a288
* implement GSWndEGL copy/pasted from zzogl.
* remove linux debugging shader that failed to compile on window
* add additional debug message during context creation
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5520 96395faa-99c1-11dd-bbfe-3dabce05a288
* Remove bad redefinition of glActiveTexture and glBlendColor pointer
* Remove glew dependency on linux
* s/OGL_DEBUG/ENABLE_OGL_DEBUG/ and enable it on debug
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5512 96395faa-99c1-11dd-bbfe-3dabce05a288
* move GL loading function into its own namespace
* Use manual GL loading on linux too and mostly drop glew dependency. (Not 100% clean we are still depends on some glew define, it will be fixed later)
Note: shaders still need to be copied manually from GSdx/res to bin/plugins
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5510 96395faa-99c1-11dd-bbfe-3dabce05a288
* Update project files
* basic compilation fix: include stdafx, s/uint/uint32/
* add selection of the opengl renderer/device in gsopen
Remain to fix opengl function declaration/initialization
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5505 96395faa-99c1-11dd-bbfe-3dabce05a288
* fix C compilation issue
Remain 2 issues with VCS:
1/ need to add 3rdparty dir as include dir (zzogl seem to import common\vsprops\3rdpartyDeps.props)
2/ need to add opengl32.lib as additional lib
git-svn-id: http://pcsx2.googlecode.com/svn/branches/gsdx-ogl-wnd@5503 96395faa-99c1-11dd-bbfe-3dabce05a288
Just adding a log to devel builds. This is a curious case we want to be notified about.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5478 96395faa-99c1-11dd-bbfe-3dabce05a288
We need to figure out what real hardware does with it but for now let's disable the effect engine in that case.
Affected games: Summer Beach Volleyball and 18 Wheeler.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5445 96395faa-99c1-11dd-bbfe-3dabce05a288
* move all remaining glx into the dedicated GLwin object
* rework a bit WGL to separate opengl context and window creation (like linux actually)
gsdx: Allow to control vsync. Not sure I used the good extension.
cmake:
* check that EGL opengl context creation
* Shut up gcc warning when force inline might not work...
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5437 96395faa-99c1-11dd-bbfe-3dabce05a288
Also, check both cores rather than the current core, that was a mistake.
Speed-- again.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5425 96395faa-99c1-11dd-bbfe-3dabce05a288
* EGL is the interface between the window and opengl. The purpose is to replace GLX/WGL in a crossplatform way.
Unfortunately so far only opensource driver use it (need not yet released mesa 9.0)
* clean most of the legacy GSopen1 window management. Only keep a basic window for debug with replayer.
git-svn-id: http://pcsx2.googlecode.com/svn/trunk@5422 96395faa-99c1-11dd-bbfe-3dabce05a288
Gregory Hainaut