pcsx2/plugins/USBqemu/usb-mic/usbhw.h

108 lines
4.9 KiB
C
Raw Normal View History

/*----------------------------------------------------------------------------
* U S B - K e r n e l
*----------------------------------------------------------------------------
* Name: USBHW.H
* Purpose: USB Hardware Layer Definitions
* Version: V1.10
*----------------------------------------------------------------------------
* This software is supplied "AS IS" without any warranties, express,
* implied or statutory, including but not limited to the implied
* warranties of fitness for purpose, satisfactory quality and
* noninfringement. Keil extends you a royalty-free right to reproduce
* and distribute executable files created using this software for use
* on Philips LPC2xxx microcontroller devices only. Nothing else gives
* you the right to use this software.
*
* Copyright (c) 2005-2006 Keil Software.
*---------------------------------------------------------------------------*/
#ifndef __USBHW_H__
#define __USBHW_H__
/* USB RAM Definitions */
#define USB_RAM_ADR 0x7FD00000 /* USB RAM Start Address */
#define USB_RAM_SZ 0x00002000 /* USB RAM Size (8kB) */
/* DMA Endpoint Descriptors */
#define DD_NISO_CNT 16 /* Non-Iso EP DMA Descr. Count (max. 32) */
#define DD_ISO_CNT 8 /* Iso EP DMA Descriptor Count (max. 32) */
#define DD_NISO_SZ (DD_NISO_CNT * 16) /* Non-Iso DMA Descr. Size */
#define DD_ISO_SZ (DD_ISO_CNT * 20) /* Iso DMA Descriptor Size */
#define DD_NISO_ADR (USB_RAM_ADR + 128) /* Non-Iso DMA Descr. Address */
#define DD_ISO_ADR (DD_NISO_ADR + DD_NISO_SZ) /* Iso DMA Descr. Address */
#define DD_SZ (128 + DD_NISO_SZ + DD_ISO_SZ) /* Descr. Size */
/* DMA Buffer Memory Definitions */
#define DMA_BUF_ADR (USB_RAM_ADR + DD_SZ) /* DMA Buffer Start Address */
#define DMA_BUF_SZ (USB_RAM_SZ - DD_SZ) /* DMA Buffer Size */
/* USB Error Codes */
#define USB_ERR_PID 0x0001 /* PID Error */
#define USB_ERR_UEPKT 0x0002 /* Unexpected Packet */
#define USB_ERR_DCRC 0x0004 /* Data CRC Error */
#define USB_ERR_TIMOUT 0x0008 /* Bus Time-out Error */
#define USB_ERR_EOP 0x0010 /* End of Packet Error */
#define USB_ERR_B_OVRN 0x0020 /* Buffer Overrun */
#define USB_ERR_BTSTF 0x0040 /* Bit Stuff Error */
#define USB_ERR_TGL 0x0080 /* Toggle Bit Error */
/* USB DMA Status Codes */
#define USB_DMA_INVALID 0x0000 /* DMA Invalid - Not Configured */
#define USB_DMA_IDLE 0x0001 /* DMA Idle - Waiting for Trigger */
#define USB_DMA_BUSY 0x0002 /* DMA Busy - Transfer in progress */
#define USB_DMA_DONE 0x0003 /* DMA Transfer Done (no Errors)*/
#define USB_DMA_OVER_RUN 0x0004 /* Data Over Run */
#define USB_DMA_UNDER_RUN 0x0005 /* Data Under Run (Short Packet) */
#define USB_DMA_ERROR 0x0006 /* Error */
#define USB_DMA_UNKNOWN 0xFFFF /* Unknown State */
/* USB DMA Descriptor */
typedef struct _USB_DMA_DESCRIPTOR {
DWORD BufAdr; /* DMA Buffer Address */
WORD BufLen; /* DMA Buffer Length */
WORD MaxSize; /* Maximum Packet Size */
DWORD InfoAdr; /* Packet Info Memory Address */
union { /* DMA Configuration */
struct {
DWORD Link : 1; /* Link to existing Descriptors */
DWORD IsoEP : 1; /* Isonchronous Endpoint */
DWORD ATLE : 1; /* ATLE (Auto Transfer Length Extract) */
DWORD Rsrvd : 5; /* Reserved */
DWORD LenPos : 8; /* Length Position (ATLE) */
} Type;
DWORD Val;
} Cfg;
} USB_DMA_DESCRIPTOR;
/* USB Hardware Functions */
extern void USB_Init (void);
extern void USB_Connect (BOOL con);
extern void USB_Reset (void);
extern void USB_Suspend (void);
extern void USB_Resume (void);
extern void USB_WakeUp (void);
extern void USB_WakeUpCfg (BOOL cfg);
extern void USB_SetAddress (DWORD adr);
extern void USB_Configure (BOOL cfg);
extern void USB_ConfigEP (USB_ENDPOINT_DESCRIPTOR *pEPD);
extern void USB_DirCtrlEP (DWORD dir);
extern void USB_EnableEP (DWORD EPNum);
extern void USB_DisableEP (DWORD EPNum);
extern void USB_ResetEP (DWORD EPNum);
extern void USB_SetStallEP (DWORD EPNum);
extern void USB_ClrStallEP (DWORD EPNum);
extern DWORD USB_ReadEP (DWORD EPNum, BYTE *pData);
extern DWORD USB_WriteEP (DWORD EPNum, BYTE *pData, DWORD cnt);
extern BOOL USB_DMA_Setup (DWORD EPNum, USB_DMA_DESCRIPTOR *pDD);
extern void USB_DMA_Enable (DWORD EPNum);
extern void USB_DMA_Disable(DWORD EPNum);
extern DWORD USB_DMA_Status (DWORD EPNum);
extern DWORD USB_DMA_BufAdr (DWORD EPNum);
extern DWORD USB_DMA_BufCnt (DWORD EPNum);
extern DWORD USB_GetFrame (void);
extern void USB_ISR (void) __irq;
#endif /* __USBHW_H__ */