pcsx2/3rdparty/include/pcap/pcap.h

977 lines
38 KiB
C
Raw Normal View History

/* -*- Mode: c; tab-width: 8; indent-tabs-mode: 1; c-basic-offset: 8; -*- */
/*
* Copyright (c) 1993, 1994, 1995, 1996, 1997
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the Computer Systems
* Engineering Group at Lawrence Berkeley Laboratory.
* 4. Neither the name of the University nor of the Laboratory may be used
* to endorse or promote products derived from this software without
* specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Remote packet capture mechanisms and extensions from WinPcap:
*
* Copyright (c) 2002 - 2003
* NetGroup, Politecnico di Torino (Italy)
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Politecnico di Torino nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#ifndef lib_pcap_pcap_h
#define lib_pcap_pcap_h
#include <pcap/funcattrs.h>
#include <pcap/pcap-inttypes.h>
#if defined(_WIN32)
#include <winsock2.h> /* u_int, u_char etc. */
#include <io.h> /* _get_osfhandle() */
#elif defined(MSDOS)
#include <sys/types.h> /* u_int, u_char etc. */
#include <sys/socket.h>
#else /* UN*X */
#include <sys/types.h> /* u_int, u_char etc. */
#include <sys/time.h>
#endif /* _WIN32/MSDOS/UN*X */
#include <pcap/socket.h> /* for SOCKET, as the active-mode rpcap APIs use it */
#ifndef PCAP_DONT_INCLUDE_PCAP_BPF_H
#include <pcap/bpf.h>
#endif
#include <stdio.h>
#ifdef __cplusplus
extern "C" {
#endif
/*
* Version number of the current version of the pcap file format.
*
* NOTE: this is *NOT* the version number of the libpcap library.
* To fetch the version information for the version of libpcap
* you're using, use pcap_lib_version().
*/
#define PCAP_VERSION_MAJOR 2
#define PCAP_VERSION_MINOR 4
#define PCAP_ERRBUF_SIZE 256
/*
* Compatibility for systems that have a bpf.h that
* predates the bpf typedefs for 64-bit support.
*/
#if BPF_RELEASE - 0 < 199406
typedef int bpf_int32;
typedef u_int bpf_u_int32;
#endif
typedef struct pcap pcap_t;
typedef struct pcap_dumper pcap_dumper_t;
typedef struct pcap_if pcap_if_t;
typedef struct pcap_addr pcap_addr_t;
/*
* The first record in the file contains saved values for some
* of the flags used in the printout phases of tcpdump.
* Many fields here are 32 bit ints so compilers won't insert unwanted
* padding; these files need to be interchangeable across architectures.
*
* Do not change the layout of this structure, in any way (this includes
* changes that only affect the length of fields in this structure).
*
* Also, do not change the interpretation of any of the members of this
* structure, in any way (this includes using values other than
* LINKTYPE_ values, as defined in "savefile.c", in the "linktype"
* field).
*
* Instead:
*
* introduce a new structure for the new format, if the layout
* of the structure changed;
*
* send mail to "tcpdump-workers@lists.tcpdump.org", requesting
* a new magic number for your new capture file format, and, when
* you get the new magic number, put it in "savefile.c";
*
* use that magic number for save files with the changed file
* header;
*
* make the code in "savefile.c" capable of reading files with
* the old file header as well as files with the new file header
* (using the magic number to determine the header format).
*
* Then supply the changes by forking the branch at
*
* https://github.com/the-tcpdump-group/libpcap/issues
*
* and issuing a pull request, so that future versions of libpcap and
* programs that use it (such as tcpdump) will be able to read your new
* capture file format.
*/
struct pcap_file_header {
bpf_u_int32 magic;
u_short version_major;
u_short version_minor;
bpf_int32 thiszone; /* gmt to local correction */
bpf_u_int32 sigfigs; /* accuracy of timestamps */
bpf_u_int32 snaplen; /* max length saved portion of each pkt */
bpf_u_int32 linktype; /* data link type (LINKTYPE_*) */
};
/*
* Macros for the value returned by pcap_datalink_ext().
*
* If LT_FCS_LENGTH_PRESENT(x) is true, the LT_FCS_LENGTH(x) macro
* gives the FCS length of packets in the capture.
*/
#define LT_FCS_LENGTH_PRESENT(x) ((x) & 0x04000000)
#define LT_FCS_LENGTH(x) (((x) & 0xF0000000) >> 28)
#define LT_FCS_DATALINK_EXT(x) ((((x) & 0xF) << 28) | 0x04000000)
typedef enum {
PCAP_D_INOUT = 0,
PCAP_D_IN,
PCAP_D_OUT
} pcap_direction_t;
/*
* Generic per-packet information, as supplied by libpcap.
*
* The time stamp can and should be a "struct timeval", regardless of
* whether your system supports 32-bit tv_sec in "struct timeval",
* 64-bit tv_sec in "struct timeval", or both if it supports both 32-bit
* and 64-bit applications. The on-disk format of savefiles uses 32-bit
* tv_sec (and tv_usec); this structure is irrelevant to that. 32-bit
* and 64-bit versions of libpcap, even if they're on the same platform,
* should supply the appropriate version of "struct timeval", even if
* that's not what the underlying packet capture mechanism supplies.
*/
struct pcap_pkthdr {
struct timeval ts; /* time stamp */
bpf_u_int32 caplen; /* length of portion present */
bpf_u_int32 len; /* length this packet (off wire) */
};
/*
* As returned by the pcap_stats()
*/
struct pcap_stat {
u_int ps_recv; /* number of packets received */
u_int ps_drop; /* number of packets dropped */
u_int ps_ifdrop; /* drops by interface -- only supported on some platforms */
#ifdef _WIN32
u_int ps_capt; /* number of packets that reach the application */
u_int ps_sent; /* number of packets sent by the server on the network */
u_int ps_netdrop; /* number of packets lost on the network */
#endif /* _WIN32 */
};
#ifdef MSDOS
/*
* As returned by the pcap_stats_ex()
*/
struct pcap_stat_ex {
u_long rx_packets; /* total packets received */
u_long tx_packets; /* total packets transmitted */
u_long rx_bytes; /* total bytes received */
u_long tx_bytes; /* total bytes transmitted */
u_long rx_errors; /* bad packets received */
u_long tx_errors; /* packet transmit problems */
u_long rx_dropped; /* no space in Rx buffers */
u_long tx_dropped; /* no space available for Tx */
u_long multicast; /* multicast packets received */
u_long collisions;
/* detailed rx_errors: */
u_long rx_length_errors;
u_long rx_over_errors; /* receiver ring buff overflow */
u_long rx_crc_errors; /* recv'd pkt with crc error */
u_long rx_frame_errors; /* recv'd frame alignment error */
u_long rx_fifo_errors; /* recv'r fifo overrun */
u_long rx_missed_errors; /* recv'r missed packet */
/* detailed tx_errors */
u_long tx_aborted_errors;
u_long tx_carrier_errors;
u_long tx_fifo_errors;
u_long tx_heartbeat_errors;
u_long tx_window_errors;
};
#endif
/*
* Item in a list of interfaces.
*/
struct pcap_if {
struct pcap_if *next;
char *name; /* name to hand to "pcap_open_live()" */
char *description; /* textual description of interface, or NULL */
struct pcap_addr *addresses;
bpf_u_int32 flags; /* PCAP_IF_ interface flags */
};
#define PCAP_IF_LOOPBACK 0x00000001 /* interface is loopback */
#define PCAP_IF_UP 0x00000002 /* interface is up */
#define PCAP_IF_RUNNING 0x00000004 /* interface is running */
#define PCAP_IF_WIRELESS 0x00000008 /* interface is wireless (*NOT* necessarily Wi-Fi!) */
#define PCAP_IF_CONNECTION_STATUS 0x00000030 /* connection status: */
#define PCAP_IF_CONNECTION_STATUS_UNKNOWN 0x00000000 /* unknown */
#define PCAP_IF_CONNECTION_STATUS_CONNECTED 0x00000010 /* connected */
#define PCAP_IF_CONNECTION_STATUS_DISCONNECTED 0x00000020 /* disconnected */
#define PCAP_IF_CONNECTION_STATUS_NOT_APPLICABLE 0x00000030 /* not applicable */
/*
* Representation of an interface address.
*/
struct pcap_addr {
struct pcap_addr *next;
struct sockaddr *addr; /* address */
struct sockaddr *netmask; /* netmask for that address */
struct sockaddr *broadaddr; /* broadcast address for that address */
struct sockaddr *dstaddr; /* P2P destination address for that address */
};
typedef void (*pcap_handler)(u_char *, const struct pcap_pkthdr *,
const u_char *);
/*
* Error codes for the pcap API.
* These will all be negative, so you can check for the success or
* failure of a call that returns these codes by checking for a
* negative value.
*/
#define PCAP_ERROR -1 /* generic error code */
#define PCAP_ERROR_BREAK -2 /* loop terminated by pcap_breakloop */
#define PCAP_ERROR_NOT_ACTIVATED -3 /* the capture needs to be activated */
#define PCAP_ERROR_ACTIVATED -4 /* the operation can't be performed on already activated captures */
#define PCAP_ERROR_NO_SUCH_DEVICE -5 /* no such device exists */
#define PCAP_ERROR_RFMON_NOTSUP -6 /* this device doesn't support rfmon (monitor) mode */
#define PCAP_ERROR_NOT_RFMON -7 /* operation supported only in monitor mode */
#define PCAP_ERROR_PERM_DENIED -8 /* no permission to open the device */
#define PCAP_ERROR_IFACE_NOT_UP -9 /* interface isn't up */
#define PCAP_ERROR_CANTSET_TSTAMP_TYPE -10 /* this device doesn't support setting the time stamp type */
#define PCAP_ERROR_PROMISC_PERM_DENIED -11 /* you don't have permission to capture in promiscuous mode */
#define PCAP_ERROR_TSTAMP_PRECISION_NOTSUP -12 /* the requested time stamp precision is not supported */
/*
* Warning codes for the pcap API.
* These will all be positive and non-zero, so they won't look like
* errors.
*/
#define PCAP_WARNING 1 /* generic warning code */
#define PCAP_WARNING_PROMISC_NOTSUP 2 /* this device doesn't support promiscuous mode */
#define PCAP_WARNING_TSTAMP_TYPE_NOTSUP 3 /* the requested time stamp type is not supported */
/*
* Value to pass to pcap_compile() as the netmask if you don't know what
* the netmask is.
*/
#define PCAP_NETMASK_UNKNOWN 0xffffffff
/*
* We're deprecating pcap_lookupdev() for various reasons (not
* thread-safe, can behave weirdly with WinPcap). Callers
* should use pcap_findalldevs() and use the first device.
*/
PCAP_API char *pcap_lookupdev(char *)
PCAP_DEPRECATED(pcap_lookupdev, "use 'pcap_findalldevs' and use the first device");
PCAP_API int pcap_lookupnet(const char *, bpf_u_int32 *, bpf_u_int32 *, char *);
PCAP_API pcap_t *pcap_create(const char *, char *);
PCAP_API int pcap_set_snaplen(pcap_t *, int);
PCAP_API int pcap_set_promisc(pcap_t *, int);
PCAP_API int pcap_can_set_rfmon(pcap_t *);
PCAP_API int pcap_set_rfmon(pcap_t *, int);
PCAP_API int pcap_set_timeout(pcap_t *, int);
PCAP_API int pcap_set_tstamp_type(pcap_t *, int);
PCAP_API int pcap_set_immediate_mode(pcap_t *, int);
PCAP_API int pcap_set_buffer_size(pcap_t *, int);
PCAP_API int pcap_set_tstamp_precision(pcap_t *, int);
PCAP_API int pcap_get_tstamp_precision(pcap_t *);
PCAP_API int pcap_activate(pcap_t *);
PCAP_API int pcap_list_tstamp_types(pcap_t *, int **);
PCAP_API void pcap_free_tstamp_types(int *);
PCAP_API int pcap_tstamp_type_name_to_val(const char *);
PCAP_API const char *pcap_tstamp_type_val_to_name(int);
PCAP_API const char *pcap_tstamp_type_val_to_description(int);
#ifdef __linux__
PCAP_API int pcap_set_protocol_linux(pcap_t *, int);
#endif
/*
* Time stamp types.
* Not all systems and interfaces will necessarily support all of these.
*
* A system that supports PCAP_TSTAMP_HOST is offering time stamps
* provided by the host machine, rather than by the capture device,
* but not committing to any characteristics of the time stamp;
* it will not offer any of the PCAP_TSTAMP_HOST_ subtypes.
*
* PCAP_TSTAMP_HOST_LOWPREC is a time stamp, provided by the host machine,
* that's low-precision but relatively cheap to fetch; it's normally done
* using the system clock, so it's normally synchronized with times you'd
* fetch from system calls.
*
* PCAP_TSTAMP_HOST_HIPREC is a time stamp, provided by the host machine,
* that's high-precision; it might be more expensive to fetch. It might
* or might not be synchronized with the system clock, and might have
* problems with time stamps for packets received on different CPUs,
* depending on the platform.
*
* PCAP_TSTAMP_ADAPTER is a high-precision time stamp supplied by the
* capture device; it's synchronized with the system clock.
*
* PCAP_TSTAMP_ADAPTER_UNSYNCED is a high-precision time stamp supplied by
* the capture device; it's not synchronized with the system clock.
*
* Note that time stamps synchronized with the system clock can go
* backwards, as the system clock can go backwards. If a clock is
* not in sync with the system clock, that could be because the
* system clock isn't keeping accurate time, because the other
* clock isn't keeping accurate time, or both.
*
* Note that host-provided time stamps generally correspond to the
* time when the time-stamping code sees the packet; this could
* be some unknown amount of time after the first or last bit of
* the packet is received by the network adapter, due to batching
* of interrupts for packet arrival, queueing delays, etc..
*/
#define PCAP_TSTAMP_HOST 0 /* host-provided, unknown characteristics */
#define PCAP_TSTAMP_HOST_LOWPREC 1 /* host-provided, low precision */
#define PCAP_TSTAMP_HOST_HIPREC 2 /* host-provided, high precision */
#define PCAP_TSTAMP_ADAPTER 3 /* device-provided, synced with the system clock */
#define PCAP_TSTAMP_ADAPTER_UNSYNCED 4 /* device-provided, not synced with the system clock */
/*
* Time stamp resolution types.
* Not all systems and interfaces will necessarily support all of these
* resolutions when doing live captures; all of them can be requested
* when reading a savefile.
*/
#define PCAP_TSTAMP_PRECISION_MICRO 0 /* use timestamps with microsecond precision, default */
#define PCAP_TSTAMP_PRECISION_NANO 1 /* use timestamps with nanosecond precision */
PCAP_API pcap_t *pcap_open_live(const char *, int, int, int, char *);
PCAP_API pcap_t *pcap_open_dead(int, int);
PCAP_API pcap_t *pcap_open_dead_with_tstamp_precision(int, int, u_int);
PCAP_API pcap_t *pcap_open_offline_with_tstamp_precision(const char *, u_int, char *);
PCAP_API pcap_t *pcap_open_offline(const char *, char *);
#ifdef _WIN32
PCAP_API pcap_t *pcap_hopen_offline_with_tstamp_precision(intptr_t, u_int, char *);
PCAP_API pcap_t *pcap_hopen_offline(intptr_t, char *);
/*
* If we're building libpcap, these are internal routines in savefile.c,
* so we must not define them as macros.
*
* If we're not building libpcap, given that the version of the C runtime
* with which libpcap was built might be different from the version
* of the C runtime with which an application using libpcap was built,
* and that a FILE structure may differ between the two versions of the
* C runtime, calls to _fileno() must use the version of _fileno() in
* the C runtime used to open the FILE *, not the version in the C
* runtime with which libpcap was built. (Maybe once the Universal CRT
* rules the world, this will cease to be a problem.)
*/
#ifndef BUILDING_PCAP
#define pcap_fopen_offline_with_tstamp_precision(f,p,b) \
pcap_hopen_offline_with_tstamp_precision(_get_osfhandle(_fileno(f)), p, b)
#define pcap_fopen_offline(f,b) \
pcap_hopen_offline(_get_osfhandle(_fileno(f)), b)
#endif
#else /*_WIN32*/
PCAP_API pcap_t *pcap_fopen_offline_with_tstamp_precision(FILE *, u_int, char *);
PCAP_API pcap_t *pcap_fopen_offline(FILE *, char *);
#endif /*_WIN32*/
PCAP_API void pcap_close(pcap_t *);
PCAP_API int pcap_loop(pcap_t *, int, pcap_handler, u_char *);
PCAP_API int pcap_dispatch(pcap_t *, int, pcap_handler, u_char *);
PCAP_API const u_char *pcap_next(pcap_t *, struct pcap_pkthdr *);
PCAP_API int pcap_next_ex(pcap_t *, struct pcap_pkthdr **, const u_char **);
PCAP_API void pcap_breakloop(pcap_t *);
PCAP_API int pcap_stats(pcap_t *, struct pcap_stat *);
PCAP_API int pcap_setfilter(pcap_t *, struct bpf_program *);
PCAP_API int pcap_setdirection(pcap_t *, pcap_direction_t);
PCAP_API int pcap_getnonblock(pcap_t *, char *);
PCAP_API int pcap_setnonblock(pcap_t *, int, char *);
PCAP_API int pcap_inject(pcap_t *, const void *, size_t);
PCAP_API int pcap_sendpacket(pcap_t *, const u_char *, int);
PCAP_API const char *pcap_statustostr(int);
PCAP_API const char *pcap_strerror(int);
PCAP_API char *pcap_geterr(pcap_t *);
PCAP_API void pcap_perror(pcap_t *, const char *);
PCAP_API int pcap_compile(pcap_t *, struct bpf_program *, const char *, int,
bpf_u_int32);
PCAP_API int pcap_compile_nopcap(int, int, struct bpf_program *,
const char *, int, bpf_u_int32);
PCAP_API void pcap_freecode(struct bpf_program *);
PCAP_API int pcap_offline_filter(const struct bpf_program *,
const struct pcap_pkthdr *, const u_char *);
PCAP_API int pcap_datalink(pcap_t *);
PCAP_API int pcap_datalink_ext(pcap_t *);
PCAP_API int pcap_list_datalinks(pcap_t *, int **);
PCAP_API int pcap_set_datalink(pcap_t *, int);
PCAP_API void pcap_free_datalinks(int *);
PCAP_API int pcap_datalink_name_to_val(const char *);
PCAP_API const char *pcap_datalink_val_to_name(int);
PCAP_API const char *pcap_datalink_val_to_description(int);
PCAP_API const char *pcap_datalink_val_to_description_or_dlt(int);
PCAP_API int pcap_snapshot(pcap_t *);
PCAP_API int pcap_is_swapped(pcap_t *);
PCAP_API int pcap_major_version(pcap_t *);
PCAP_API int pcap_minor_version(pcap_t *);
PCAP_API int pcap_bufsize(pcap_t *);
/* XXX */
PCAP_API FILE *pcap_file(pcap_t *);
PCAP_API int pcap_fileno(pcap_t *);
#ifdef _WIN32
PCAP_API int pcap_wsockinit(void);
#endif
PCAP_API pcap_dumper_t *pcap_dump_open(pcap_t *, const char *);
#ifdef _WIN32
PCAP_API pcap_dumper_t *pcap_dump_hopen(pcap_t *, intptr_t);
/*
* If we're building libpcap, this is an internal routine in sf-pcap.c, so
* we must not define it as a macro.
*
* If we're not building libpcap, given that the version of the C runtime
* with which libpcap was built might be different from the version
* of the C runtime with which an application using libpcap was built,
* and that a FILE structure may differ between the two versions of the
* C runtime, calls to _fileno() must use the version of _fileno() in
* the C runtime used to open the FILE *, not the version in the C
* runtime with which libpcap was built. (Maybe once the Universal CRT
* rules the world, this will cease to be a problem.)
*/
#ifndef BUILDING_PCAP
#define pcap_dump_fopen(p,f) \
pcap_dump_hopen(p, _get_osfhandle(_fileno(f)))
#endif
#else /*_WIN32*/
PCAP_API pcap_dumper_t *pcap_dump_fopen(pcap_t *, FILE *fp);
#endif /*_WIN32*/
PCAP_API pcap_dumper_t *pcap_dump_open_append(pcap_t *, const char *);
PCAP_API FILE *pcap_dump_file(pcap_dumper_t *);
PCAP_API long pcap_dump_ftell(pcap_dumper_t *);
PCAP_API int64_t pcap_dump_ftell64(pcap_dumper_t *);
PCAP_API int pcap_dump_flush(pcap_dumper_t *);
PCAP_API void pcap_dump_close(pcap_dumper_t *);
PCAP_API void pcap_dump(u_char *, const struct pcap_pkthdr *, const u_char *);
PCAP_API int pcap_findalldevs(pcap_if_t **, char *);
PCAP_API void pcap_freealldevs(pcap_if_t *);
/*
* We return a pointer to the version string, rather than exporting the
* version string directly.
*
* On at least some UNIXes, if you import data from a shared library into
* an program, the data is bound into the program binary, so if the string
* in the version of the library with which the program was linked isn't
* the same as the string in the version of the library with which the
* program is being run, various undesirable things may happen (warnings,
* the string being the one from the version of the library with which the
* program was linked, or even weirder things, such as the string being the
* one from the library but being truncated).
*
* On Windows, the string is constructed at run time.
*/
PCAP_API const char *pcap_lib_version(void);
/*
* On at least some versions of NetBSD and QNX, we don't want to declare
* bpf_filter() here, as it's also be declared in <net/bpf.h>, with a
* different signature, but, on other BSD-flavored UN*Xes, it's not
* declared in <net/bpf.h>, so we *do* want to declare it here, so it's
* declared when we build pcap-bpf.c.
*/
#if !defined(__NetBSD__) && !defined(__QNX__)
PCAP_API u_int bpf_filter(const struct bpf_insn *, const u_char *, u_int, u_int);
#endif
PCAP_API int bpf_validate(const struct bpf_insn *f, int len);
PCAP_API char *bpf_image(const struct bpf_insn *, int);
PCAP_API void bpf_dump(const struct bpf_program *, int);
#if defined(_WIN32)
/*
* Win32 definitions
*/
/*!
\brief A queue of raw packets that will be sent to the network with pcap_sendqueue_transmit().
*/
struct pcap_send_queue
{
u_int maxlen; /* Maximum size of the queue, in bytes. This
variable contains the size of the buffer field. */
u_int len; /* Current size of the queue, in bytes. */
char *buffer; /* Buffer containing the packets to be sent. */
};
typedef struct pcap_send_queue pcap_send_queue;
/*!
\brief This typedef is a support for the pcap_get_airpcap_handle() function
*/
#if !defined(AIRPCAP_HANDLE__EAE405F5_0171_9592_B3C2_C19EC426AD34__DEFINED_)
#define AIRPCAP_HANDLE__EAE405F5_0171_9592_B3C2_C19EC426AD34__DEFINED_
typedef struct _AirpcapHandle *PAirpcapHandle;
#endif
PCAP_API int pcap_setbuff(pcap_t *p, int dim);
PCAP_API int pcap_setmode(pcap_t *p, int mode);
PCAP_API int pcap_setmintocopy(pcap_t *p, int size);
PCAP_API HANDLE pcap_getevent(pcap_t *p);
PCAP_API int pcap_oid_get_request(pcap_t *, bpf_u_int32, void *, size_t *);
PCAP_API int pcap_oid_set_request(pcap_t *, bpf_u_int32, const void *, size_t *);
PCAP_API pcap_send_queue* pcap_sendqueue_alloc(u_int memsize);
PCAP_API void pcap_sendqueue_destroy(pcap_send_queue* queue);
PCAP_API int pcap_sendqueue_queue(pcap_send_queue* queue, const struct pcap_pkthdr *pkt_header, const u_char *pkt_data);
PCAP_API u_int pcap_sendqueue_transmit(pcap_t *p, pcap_send_queue* queue, int sync);
PCAP_API struct pcap_stat *pcap_stats_ex(pcap_t *p, int *pcap_stat_size);
PCAP_API int pcap_setuserbuffer(pcap_t *p, int size);
PCAP_API int pcap_live_dump(pcap_t *p, char *filename, int maxsize, int maxpacks);
PCAP_API int pcap_live_dump_ended(pcap_t *p, int sync);
PCAP_API int pcap_start_oem(char* err_str, int flags);
PCAP_API PAirpcapHandle pcap_get_airpcap_handle(pcap_t *p);
#define MODE_CAPT 0
#define MODE_STAT 1
#define MODE_MON 2
#elif defined(MSDOS)
/*
* MS-DOS definitions
*/
PCAP_API int pcap_stats_ex (pcap_t *, struct pcap_stat_ex *);
PCAP_API void pcap_set_wait (pcap_t *p, void (*yield)(void), int wait);
PCAP_API u_long pcap_mac_packets (void);
#else /* UN*X */
/*
* UN*X definitions
*/
PCAP_API int pcap_get_selectable_fd(pcap_t *);
PCAP_API struct timeval *pcap_get_required_select_timeout(pcap_t *);
#endif /* _WIN32/MSDOS/UN*X */
/*
* Remote capture definitions.
*
* These routines are only present if libpcap has been configured to
* include remote capture support.
*/
/*
* The maximum buffer size in which address, port, interface names are kept.
*
* In case the adapter name or such is larger than this value, it is truncated.
* This is not used by the user; however it must be aware that an hostname / interface
* name longer than this value will be truncated.
*/
#define PCAP_BUF_SIZE 1024
/*
* The type of input source, passed to pcap_open().
*/
#define PCAP_SRC_FILE 2 /* local savefile */
#define PCAP_SRC_IFLOCAL 3 /* local network interface */
#define PCAP_SRC_IFREMOTE 4 /* interface on a remote host, using RPCAP */
/*
* The formats allowed by pcap_open() are the following:
* - file://path_and_filename [opens a local file]
* - rpcap://devicename [opens the selected device devices available on the local host, without using the RPCAP protocol]
* - rpcap://host/devicename [opens the selected device available on a remote host]
* - rpcap://host:port/devicename [opens the selected device available on a remote host, using a non-standard port for RPCAP]
* - adaptername [to open a local adapter; kept for compability, but it is strongly discouraged]
* - (NULL) [to open the first local adapter; kept for compability, but it is strongly discouraged]
*
* The formats allowed by the pcap_findalldevs_ex() are the following:
* - file://folder/ [lists all the files in the given folder]
* - rpcap:// [lists all local adapters]
* - rpcap://host:port/ [lists the devices available on a remote host]
*
* Referring to the 'host' and 'port' parameters, they can be either numeric or literal. Since
* IPv6 is fully supported, these are the allowed formats:
*
* - host (literal): e.g. host.foo.bar
* - host (numeric IPv4): e.g. 10.11.12.13
* - host (numeric IPv4, IPv6 style): e.g. [10.11.12.13]
* - host (numeric IPv6): e.g. [1:2:3::4]
* - port: can be either numeric (e.g. '80') or literal (e.g. 'http')
*
* Here you find some allowed examples:
* - rpcap://host.foo.bar/devicename [everything literal, no port number]
* - rpcap://host.foo.bar:1234/devicename [everything literal, with port number]
* - rpcap://10.11.12.13/devicename [IPv4 numeric, no port number]
* - rpcap://10.11.12.13:1234/devicename [IPv4 numeric, with port number]
* - rpcap://[10.11.12.13]:1234/devicename [IPv4 numeric with IPv6 format, with port number]
* - rpcap://[1:2:3::4]/devicename [IPv6 numeric, no port number]
* - rpcap://[1:2:3::4]:1234/devicename [IPv6 numeric, with port number]
* - rpcap://[1:2:3::4]:http/devicename [IPv6 numeric, with literal port number]
*/
/*
* URL schemes for capture source.
*/
/*
* This string indicates that the user wants to open a capture from a
* local file.
*/
#define PCAP_SRC_FILE_STRING "file://"
/*
* This string indicates that the user wants to open a capture from a
* network interface. This string does not necessarily involve the use
* of the RPCAP protocol. If the interface required resides on the local
* host, the RPCAP protocol is not involved and the local functions are used.
*/
#define PCAP_SRC_IF_STRING "rpcap://"
/*
* Flags to pass to pcap_open().
*/
/*
* Specifies whether promiscuous mode is to be used.
*/
#define PCAP_OPENFLAG_PROMISCUOUS 0x00000001
/*
* Specifies, for an RPCAP capture, whether the data transfer (in
* case of a remote capture) has to be done with UDP protocol.
*
* If it is '1' if you want a UDP data connection, '0' if you want
* a TCP data connection; control connection is always TCP-based.
* A UDP connection is much lighter, but it does not guarantee that all
* the captured packets arrive to the client workstation. Moreover,
* it could be harmful in case of network congestion.
* This flag is meaningless if the source is not a remote interface.
* In that case, it is simply ignored.
*/
#define PCAP_OPENFLAG_DATATX_UDP 0x00000002
/*
* Specifies wheether the remote probe will capture its own generated
* traffic.
*
* In case the remote probe uses the same interface to capture traffic
* and to send data back to the caller, the captured traffic includes
* the RPCAP traffic as well. If this flag is turned on, the RPCAP
* traffic is excluded from the capture, so that the trace returned
* back to the collector is does not include this traffic.
*
* Has no effect on local interfaces or savefiles.
*/
#define PCAP_OPENFLAG_NOCAPTURE_RPCAP 0x00000004
/*
* Specifies whether the local adapter will capture its own generated traffic.
*
* This flag tells the underlying capture driver to drop the packets
* that were sent by itself. This is useful when building applications
* such as bridges that should ignore the traffic they just sent.
*
* Supported only on Windows.
*/
#define PCAP_OPENFLAG_NOCAPTURE_LOCAL 0x00000008
/*
* This flag configures the adapter for maximum responsiveness.
*
* In presence of a large value for nbytes, WinPcap waits for the arrival
* of several packets before copying the data to the user. This guarantees
* a low number of system calls, i.e. lower processor usage, i.e. better
* performance, which is good for applications like sniffers. If the user
* sets the PCAP_OPENFLAG_MAX_RESPONSIVENESS flag, the capture driver will
* copy the packets as soon as the application is ready to receive them.
* This is suggested for real time applications (such as, for example,
* a bridge) that need the best responsiveness.
*
* The equivalent with pcap_create()/pcap_activate() is "immediate mode".
*/
#define PCAP_OPENFLAG_MAX_RESPONSIVENESS 0x00000010
/*
* Remote authentication methods.
* These are used in the 'type' member of the pcap_rmtauth structure.
*/
/*
* NULL authentication.
*
* The 'NULL' authentication has to be equal to 'zero', so that old
* applications can just put every field of struct pcap_rmtauth to zero,
* and it does work.
*/
#define RPCAP_RMTAUTH_NULL 0
/*
* Username/password authentication.
*
* With this type of authentication, the RPCAP protocol will use the username/
* password provided to authenticate the user on the remote machine. If the
* authentication is successful (and the user has the right to open network
* devices) the RPCAP connection will continue; otherwise it will be dropped.
*
* *******NOTE********: the username and password are sent over the network
* to the capture server *IN CLEAR TEXT*. Don't use this on a network
* that you don't completely control! (And be *really* careful in your
* definition of "completely"!)
*/
#define RPCAP_RMTAUTH_PWD 1
/*
* This structure keeps the information needed to autheticate the user
* on a remote machine.
*
* The remote machine can either grant or refuse the access according
* to the information provided.
* In case the NULL authentication is required, both 'username' and
* 'password' can be NULL pointers.
*
* This structure is meaningless if the source is not a remote interface;
* in that case, the functions which requires such a structure can accept
* a NULL pointer as well.
*/
struct pcap_rmtauth
{
/*
* \brief Type of the authentication required.
*
* In order to provide maximum flexibility, we can support different types
* of authentication based on the value of this 'type' variable. The currently
* supported authentication methods are defined into the
* \link remote_auth_methods Remote Authentication Methods Section\endlink.
*/
int type;
/*
* \brief Zero-terminated string containing the username that has to be
* used on the remote machine for authentication.
*
* This field is meaningless in case of the RPCAP_RMTAUTH_NULL authentication
* and it can be NULL.
*/
char *username;
/*
* \brief Zero-terminated string containing the password that has to be
* used on the remote machine for authentication.
*
* This field is meaningless in case of the RPCAP_RMTAUTH_NULL authentication
* and it can be NULL.
*/
char *password;
};
/*
* This routine can open a savefile, a local device, or a device on
* a remote machine running an RPCAP server.
*
* For opening a savefile, the pcap_open_offline routines can be used,
* and will work just as well; code using them will work on more
* platforms than code using pcap_open() to open savefiles.
*
* For opening a local device, pcap_open_live() can be used; it supports
* most of the capabilities that pcap_open() supports, and code using it
* will work on more platforms than code using pcap_open(). pcap_create()
* and pcap_activate() can also be used; they support all capabilities
* that pcap_open() supports, except for the Windows-only
* PCAP_OPENFLAG_NOCAPTURE_LOCAL, and support additional capabilities.
*
* For opening a remote capture, pcap_open() is currently the only
* API available.
*/
PCAP_API pcap_t *pcap_open(const char *source, int snaplen, int flags,
int read_timeout, struct pcap_rmtauth *auth, char *errbuf);
PCAP_API int pcap_createsrcstr(char *source, int type, const char *host,
const char *port, const char *name, char *errbuf);
PCAP_API int pcap_parsesrcstr(const char *source, int *type, char *host,
char *port, char *name, char *errbuf);
/*
* This routine can scan a directory for savefiles, list local capture
* devices, or list capture devices on a remote machine running an RPCAP
* server.
*
* For scanning for savefiles, it can be used on both UN*X systems and
* Windows systems; for each directory entry it sees, it tries to open
* the file as a savefile using pcap_open_offline(), and only includes
* it in the list of files if the open succeeds, so it filters out
* files for which the user doesn't have read permission, as well as
* files that aren't valid savefiles readable by libpcap.
*
* For listing local capture devices, it's just a wrapper around
* pcap_findalldevs(); code using pcap_findalldevs() will work on more
* platforms than code using pcap_findalldevs_ex().
*
* For listing remote capture devices, pcap_findalldevs_ex() is currently
* the only API available.
*/
PCAP_API int pcap_findalldevs_ex(const char *source,
struct pcap_rmtauth *auth, pcap_if_t **alldevs, char *errbuf);
/*
* Sampling methods.
*
* These allow pcap_loop(), pcap_dispatch(), pcap_next(), and pcap_next_ex()
* to see only a sample of packets, rather than all packets.
*
* Currently, they work only on Windows local captures.
*/
/*
* Specifies that no sampling is to be done on the current capture.
*
* In this case, no sampling algorithms are applied to the current capture.
*/
#define PCAP_SAMP_NOSAMP 0
/*
* Specifies that only 1 out of N packets must be returned to the user.
*
* In this case, the 'value' field of the 'pcap_samp' structure indicates the
* number of packets (minus 1) that must be discarded before one packet got
* accepted.
* In other words, if 'value = 10', the first packet is returned to the
* caller, while the following 9 are discarded.
*/
#define PCAP_SAMP_1_EVERY_N 1
/*
* Specifies that we have to return 1 packet every N milliseconds.
*
* In this case, the 'value' field of the 'pcap_samp' structure indicates
* the 'waiting time' in milliseconds before one packet got accepted.
* In other words, if 'value = 10', the first packet is returned to the
* caller; the next returned one will be the first packet that arrives
* when 10ms have elapsed.
*/
#define PCAP_SAMP_FIRST_AFTER_N_MS 2
/*
* This structure defines the information related to sampling.
*
* In case the sampling is requested, the capturing device should read
* only a subset of the packets coming from the source. The returned packets
* depend on the sampling parameters.
*
* WARNING: The sampling process is applied *after* the filtering process.
* In other words, packets are filtered first, then the sampling process
* selects a subset of the 'filtered' packets and it returns them to the
* caller.
*/
struct pcap_samp
{
/*
* Method used for sampling; see above.
*/
int method;
/*
* This value depends on the sampling method defined.
* For its meaning, see above.
*/
int value;
};
/*
* New functions.
*/
PCAP_API struct pcap_samp *pcap_setsampling(pcap_t *p);
/*
* RPCAP active mode.
*/
/* Maximum length of an host name (needed for the RPCAP active mode) */
#define RPCAP_HOSTLIST_SIZE 1024
PCAP_API SOCKET pcap_remoteact_accept(const char *address, const char *port,
const char *hostlist, char *connectinghost,
struct pcap_rmtauth *auth, char *errbuf);
PCAP_API int pcap_remoteact_list(char *hostlist, char sep, int size,
char *errbuf);
PCAP_API int pcap_remoteact_close(const char *host, char *errbuf);
PCAP_API void pcap_remoteact_cleanup(void);
#ifdef __cplusplus
}
#endif
#endif /* lib_pcap_pcap_h */