* Turn deprecated declataion warnings on by default and make them non-fatal
* Make output_finder iterable in algorithms and range-based for loops
* Replace a lot of set_something with output_finder
* Fixed building using system utf8proc
* Fixed building using system portaudio
* Allow using system-wide asio headers (1.11.0 or higher required).
* Allow using system-wide glm headers
* Allow using system-wide rapidjson headers
* Put all ext_includedir calls together
* Fixed build failure when SOURCES is defined
* Fixed building using system utf8proc
* Fixed building using system portaudio
* Allow using system-wide asio headers (1.11.0 or higher required).
* Allow using system-wide glm headers
* Allow using system-wide rapidjson headers
* Add 89 in 1 mini console
* Add mc_cb280, similar to sy889
* More VTxx ROMs
* Add more nes_vt systems
* Add SY888B
* Add support for VTxx systems with scrambled instructions (FC Pocket, DGUN2573)
* Add support for Family Pocket, and more FC Pocket games
* Small fixes and reclassifications (nw)
* Support for VTxx scrambled banking (thanks NewRisingSun for help)
* New palette code from NewRisingSun, etc
* Various VT03 fixes, several systems including ZDog now working
* nes_vt comment/status updates (nw)
* Refactor m6502_vtscr (nw)
* create derived 6502 type for XaviX because it has at least one custom 4-byte opcode that doesn't fit any other type.
treating that opcode as NOP for now.
have a feeling it might be something to do with the other integrated hardware, might be 'execute co-processor code chain at this address' or something similar
It isn't a standard JSL (Jump Subroutine Long) like the SNES cpu opcode in the same place as this, it seems to point at some code-like structures tho)
could also be a secondary operation mode with different encoding like ARM's Thumb mode tho I guess.
We currently only have a single XaviX based dump (taitons1) but there are more on the way. I'm going to see if the code flow makes any sense at all with these missing, or if any of it gives a clue as to what they should actually do.
* xavix - let's call these callf and retf then
after further investigation these are some kind of extra 'long jump' subroutine / task handlers, the 0x80 also being a custom opcode was throwing me off trying to identify them before.
looks like they might have been hacking 65816 features into the regular 6502 core?
* prepare for extra address bits (nw)
* better program flow (nw)
- P.R.E.S. Advanced Plus 3/4
- Advanced Quarter Meg Ram
- Cumana Floppy Disk System
- Sound Expansion
- Sound Expansion v3
- Stop Press 64
- Solidisk EFS
New working software list additions
-----------------------------------
electron_cart: Solidisk EFS 2.1E
New NOT_WORKING software list additions
---------------------------------------
electron_cart: Stop Press 64
Software list items promoted to working
---------------------------------------
electron_cart: Advanced Plus 3, Advanced Quarter Meg RAM, Slogger Electron Disk System, Sound Expansion v3
* fix/tidy tvboy driver (nw)
* missed file (nw)
* framework for adding 'gamebooster' (need to figure out how it actually works / maps tho) (nw)
(code based on zx spectrum expansion port code)
* (nw)
* lost a line (nw)
* allow it to run (nw)
* continued work (nw)
* mame64 psj -parallel gamebooster -cart tetris now works
* rm outdated (nw)
* remove unneeded code (nw)
* limit accesses, log unexpected ones, might have custom banking (nw)
* write bytes in an order that keeps the gb code happier , sml boots (nw)
* various reorganization of radica and vtech stuff
* missed this (nw)
* correct file (nw)
* newlines and stuff (nw)
* less c_str (nw)
* worse (IMHO) filenames (nw)
* format got messed up (nw)
* some bits for golden tee (nw)
* get us renderng something in rad_gtg (nw)
* some basic inputs (nw)
* further improvements to the Golden Tee Home Edition (radica eu3a14)
added Radica Sensible Soccer [Sean Riddle]
* tilebase handling (nw)
* golden tee home video improvements (nw)
Revert "Removal of voltage_regulator_device (nw)"
This reverts commit 1af133752a.
Revert "New way to provide DAC reference inputs (nw)"
This reverts commit 1c6a7ab40c.
* restored basic support for SANITIZE make option
* disabled some unwanted UBSAN checks / enabled nullability checks / enabled ASAN use-after-scope checks (nw)
* new NOT WORKING
Space Invaders (Radica, Arcade Legends TV Game) [Team Europe, Sean Riddle]
(not sure what this is really called, it's a 5-in-1, it probably contains a customized 6502 core, or there should be an internal bootstrap rom)
* typo (nw)
* based on a jump to e092 which looks like it should maybe skip an opcode this seems a more possible mapping (nw)
* actually vectors are right there (nw)
* memory map improvements (nw)
* various notes etc. (nw)
* various banking bits (nw)
* actually remember to hook up the read (nw)
* clearly inputs (nw)
* show that the game is actually running, even if we don't understand the video format, there's clearly some kind of tilemap structure in ram (nw)
* this is bitmap ram on qix (nw)
* didn't mean to change this (nw)
* gfx are stored more like texture pages?! (nw)
please people, remember to keep source UTF-8 and if you're committing on behalf of others, clean up indents to meet MAME conventions
anyone can run srcclean over a submission and see what will get hit
promoted China set of Oriental Legend 2 to working
promoted Knights of Valour 2 New Legend to working
as each game/region requires a valid default card in order to save said cards are part of romset.
(there's probably a cleaner way to do the device finder stuff but I forgot and can't find reference)
An implementation of the National Semiconductor DP8510 BITBLT Processing Unit. This is used on the InterPro GT family graphics boards, and this implementation seems to be correct enough to enable me to progress there, hence the PR. While I'd love to have another system to test against, I'm not aware of any other systems that ever used this device other than some NatSemi reference designs, which are not (yet) in MAME.
* hp9845 & hp64k: fixed breakage caused by c46e1007a8
* hp9845: HLE of internal printer added
* hp9845: fix to printer interrupt line
* hp9845: moved src/devices/machine/hp9845_printer.* to src/mame/machine
Disassemblers are now independant classes. Not only the code is
cleaner, but unidasm has access to all the cpu cores again. The
interface to the disassembly method has changed from byte buffers to
objects that give a result to read methods. This also adds support
for lfsr and/or paged PCs.
Implementation of 28F010 and family flash memory devices. These are not compatible with the JEDEC-standard flash command protocol implemented in intelfsh.
* Don't use device_serial_interface for transmit - it can't support sync modes, on-the-fly register updates, and other weirdness.
* Better modelling of 1-deep transmit queue.
* Better RTS/CTS behaviour.
* Completely overhauled interrupt logic - vectors should be correct for most async modes.
* Implemented different auto-reset receive errors in MPSC vs SIO.
* Implemented SDLC transmission including bit stuffing, transmit CRC, abort, and underrun/end-of-message behaviour.
Added an SDLC consumer device that logs SNA frame headers and data.
The analogue joystick is now emulated. Also fixed a few minor issues
with the memory map.
This also adds a generic Z80 dasisy chain device, for use in drivers
with non-Z80 peripherals.
Use "mame einstein -pipe tk02" to attach the 80 column device.
* Removed no longer needed einstei2 driver
* Added cursor rendering to the 80 column device
* Added support for the alternate character set (use dip switch to
change)
* Cleaned up and added save state support to the 80 column device
Many changes in this PR, including the following:
* added support for InterPro 20x0, 24x0 and 27x0 systems
* added support for SR bus/slot devices
* added support for Ethernet, graphics, keyboard and mouse
* added support for serial DMA
* improved timer, interrupt and DMA handling
* improved comments/documentation
Note: ioga is still a major work in progress, and most of the other *ga's don't do anything useful yet, however this build can do some new and useful things, and it's closer to OS boot than before, as well as cleaned up in some of the better known areas.
* added basic support for the system bus variously referred to as SR, SR bus, SRX and CBUS
* added an initial GT graphics card implementation, only supports the video ram and ramdac for now, but sufficient to boot the diagnostic monitor in graphics mode
* added a high-level emulation of the InterPro keyboard
protection handled etc. written from scratch based on notes from Kevtris and Peter
banking in the slot system seems somewhat archaic compared to proper modern banking, but this is how all other drivers I saw using slot roms did it.
---------------------
E-Touch Mahjong Series #6: Scandal Blue - Midara na Daishou [ShouTime, Team Japump, The Dumping Union]
E-Touch Mahjong Series #7: Trap Zone - Yokubou no Kaisoku Densha [ShouTime, Team Japump, The Dumping Union]
--------------------------------------
Ton Puu Mahjong [ShouTime, The Dumping Union]
This is only a skeleton driver. ShouTime will keep the PCB only for a few more days, so if someone has the time to have a look.. (nw)
* Remove duplicate code
* Screen raw parameters and XTAL values
* Added PAL dumps for supbtime [Luiskiko/jammarcade.net]
* Add dip switch locations to all games
* Emulate LC7535 based volume control for Dragon Gun board based games
* Add DSW3 and DIP locations to Captain Avenger
* Reorganize driver and start cleaning it up (in progress)
Specifically, this creates a call osd_get_command_line() that returns UTF-8 command line arguments as std::vector<std::string>. On non-Windows platforms, this does nothing more than build the vector. On Windows, this invokes GetCommandLineW() and CommandLineToArgvW(). This also attempts to unwind usage of wmain()/_tmain() on Windows, which is not standard.
Related to this, this fixes a bug in Imgtool; specifically, non-7 bit ASCII was not being handled correctly in Windows.
This is really an admission that the way that Windows handles Unicode and command line arguments sucks, and it is my belief that having a wmain() or _tmain() declaration specific for Windows is a worse solution. C'est la vie.
I'm very open to the idea that src/osd/osdcore.[cpp|h] is not the best place to do this. Let me know if I should move it.
------------------------------------------------------
Mephisto Modena [yoyo_chessboard, Sandro Ronco]
Mephisto Monte Carlo [Sandro Ronco]
Mephisto Monte Carlo IV LE [Sandro Ronco]
Mephisto Mega IV [Sandro Ronco]
Used by games in the cninja and deco32 drivers. This implies proper
VBlank IRQ ack for all games now. Also added and improved raw screen
parameters for various games.
* hp85: added support for optional ROM cartridges. Started optional ROM
sw list (not finished).
* hp85: refactored mapping of opt. ROMs according to cuavas' comments
* initial skelethon: ControlID X628 fingerprint reader
* first draft of an implementation of the NT7534 device (LCD controller)
* fix emulation of ControlID x628 + NT7534 LCD controller
* cidx628: fix LCD color palette on Control ID x628 driver
* Adding a header with details of the hardware. This is the first MAME driver with an LCD controlled by a NT7534 chip, so I wrote an initial implementation of that new device.
unkfr belongs in 4enraya (which was my guess when it was mentioned)
doesn't seem much point in having a complete non-working driver in the source for it when it boots as a romswap.
Basic system is done and it can boot from floppy, but there are still
many things to add, therefore marked as NOT_WORKING for now.
New machines added as MACHINE_NOT_WORKING
-----------------------------------------
Kontron PSI98 [Dirk Best, rfka01]
slots uncovered
(nw) It seems at some point someone didn't realise that choosing the
same option from a SLOT_INTERFACE in multiple slots creates multiple
instances of the same device type, and this got copy/pasted everywhere.
* Support serving static assets, use for stylesheet, script and images
* Better error pages, reject unsupported HTTP methods
* Replace lists with sortable tables with more detail (click headings to sort)
* Add pages for exploring source files, link from machine pages
- Can start from full source file list at http://localhost:8080/sourcefile/
(nw) JavaScript performance can drop when sorting really big tables,
e.g. the list of all source files, or the list of machines in some of
the fruit machine drivers. This update doesn't expose machine/device
information, just consolidating what's there. The wsgiref server is
adding headers to prevent caching, I'll look for a workaround.
output from -listxml verb. Compatible with Python 2.7 or Python 3.
Requires at least SQLite 3.6.19 for foreign key support.
This serves a few purposes:
* Demonstrating some things that can be done with -listxml output
* Providing a reference implementation for useful queries
* Helping ensure our XML output isn't completely useless
* Providing additional queries over MAME's auxiliary verbs
* Proper glob support unlike the broken implementation in MAME right now
Right now, it's a bit ugly to use. You can only load into a completely
clean database, and you need to manually create the schema. I'll
address this later. The default database filename is minimaws.sqlite3
(you can override this with --database before the verb on the command
line). Loading isn't particularly fast, but query performance is very
good.
Create a database first:
rm -f minimaws.sqlite3
sqlite3 minimaws.sqlite3 < scripts/minimaws/schema.sql
Now you can load it using a MAME binary or XML output (use one of these
options, not both):
python scripts/minimaws/minimaws.py load --executable ./mame
python scripts/minimaws/minimaws.py load --file mame0188.xml
Once that's done you can do queries:
python scripts/minimaws/minimaws.py listfull
python scripts/minimaws/minimaws.py listclones "*cmast*"
python scripts/minimaws/minimaws.py listsource "*mous*"
python scripts/minimaws/minimaws.py listbrothers "intl*"
These work much like the equivalent MAME verbs, but without the overhead
of loading MAME's static data. But there's one already query that you
can't easily do with MAME:
python scripts/minimaws/minimaws.py listaffected "src/devices/cpu/m6805/*" src/devices/sound/qsound.cpp
This will list all runnable systems that use a device defined in any
file under devices/cpu/m6805 or in devices/sound/qsound.cpp (you can
specify and arbitrary number of files or glob patterns). This may be
useful for planning regression tests.
Another thing this does (that gives rise to the name) is serving
information over HTTP. It's implemented as a WSGI, and it mainly uses
GET requests. This means it can run hosted in Apache mod_wsgi, or
cached by Apache mod_proxy, Squid, nginx, or something else. It can
also run out-of-the-box using wsgiref.simple_server components. The
default port is 8080 but this can be changed with the --port option.
Start the web server with the serve verb (stop it with keyboard
interrupt ^C or similar):
python scripts/minimaws/minimaws.py serve
Right now it's rather crude, and doesn't list devices for you. This
means you have to know the shortname of a machine to get a useful URL.
For example, you can look at a driver and see its parent set and the
devices it references:
http://localhost:8080/machine/kof2000n
Or you can look at a device, and see the devices it refereces, as well
as the devices/systems that reference it:
http://localhost:8080/machine/zac1b11142
The links between devices/systems are clickable. They might 404 on you
if you used a single-driver build with broken parent/clone
relationships, but they should all work in a full build that passes
validation.
There's still a lot to do. In particular I want to demonstrate how to
do live DIP switch preview and dynamic slot discovery. But I've already
discovered stuff in the -listxml output that's less than ideal with
this, so it's helping.
appropriate containers, remove misleading const qualifiers, reduce
repeated XML walking.
(nw) Groups aren't parameterised, so they aren't as useful as they could
be (yes, it's on my TODO list). However, it's already useful for
putting a common set of elements in multiple views, potentially at
different locations/scales. See intlc44.lay and intlc440.lay for
examples of the level of copypasta this can eliminate. Be aware that
groups with explicit bounds don't clip thair content, it's only used for
calucating the transform matrix.
These humble 16-pin logic devices were commonly used in 8-bit arcade games to control coin counters/lockouts, IRQ flipflops, graphics banking, slave CPU reset lines, discrete audio triggers, screen flipping, serial EEPROMs and much else. Over 100 drivers and a few bus devices have been updated to use the new implementation, and a great deal of research has gone into documenting the physical location of these devices on actual PCBs in the source. Write handlers have been provided for both orthodox and somewhat less conventional memory mappings.
Incidental to this update, coin counters and/or lockouts have been added to Atari System 1 games, Basketball, Gauntlet, Gyruss, Hana Yayoi, Hole Land, Jr. Pac-Man, Mahjong Sisters, Pooyan, Roc'n Rope, Squash, Thunder Hoop, Time Limit, Time Pilot '84 and many others. This also cleans up coin counter behavior in Sauro and Rally Bike.
(nw) The purpose of committing this change, which has been several months in the making, early in the 0.189GIT cycle will be to allow time for fixing potential regressions; I've fixed a number of drivers that lost sound from this for various reasons (hnayayoi.cpp having missing or garbage ADPCM was particularly painful, since the three games in that driver all work slightly differently), but I can't test all affected drivers exhaustively. @Tafoid, don't bother running automated screen capture comparison tests on this, as many drivers are now expected to have the screen flipped for the first few seconds after reset.
- made ds5002fp store internal ram and sfr registers to nvram as they're battery backed
- this includes the 'configuration' details which are actually programmable, so don't belong in the 'MACHINE_CONFIG' section but rather as part of the default NVRAM
- as the exact format of the NVRAM storage is not known, and as not to break compatibility with the 'wrally' set Gaelco offer these bytes are now configured in the ROM LOADING like default NVRAM. Slightly awkward, but probably the best way.
- made the SRAM (external to DS5002FP, but still powered by the same battery) also save content, some games actually use it to store scores etc. as well as the game code.
- cleaned up the Touch and Go Dallas dump, and added some preconfigured internal RAM so that it actually loads the score data from the SRAM properly
- prepared all other drivers for the adding of the SRAM dumps, removing old 'never going to work' simulation code in the process. To do this a wrapper / interface device for the Gaelco Dallas + SRAM box was created.
out of whatsnew
Alligator Hunt was dumped and works, but not yet added, want to verify on a 2nd PCB first as the process does corrupt some bytes and a couple had to be handfixed, so the only way to know for sure is multiple dumps.
* Fix save/load states in Emscripten build
* Simplified Emscripten integration points
* Moved standalone JS functions to be static member functions of running_machine
* Improved Emscripten main loop
* Use convenience functions for cleaner code
As an added bonus, this now allows for proper shutdown of the running machine when running in the Emscripten environment - previously, attempts to exit the program were just being ignored.
- Merge driver with goldnpkr.cpp source to get working sound (graphics and sound should be identical)
- Add version numbers to set names
- Promote megadpkrb to WORKING (with one caveat)
What works:
* HP85A machine with 16K of RAM
* Capricorn CPU works
* Keyboard works (with minor issues)
* CRT text / graphics modes work (correct speed is not emulated yet so service ROM complaints)
* BASIC is usable
What is missing (and I'll have hopefully working soon):
* HW timers
* Beeper
* Integral printer
* DC100 cassette drive
* Extension ROMs
* I/O modules (especially the HPIB interface so that we can hook up floppy drives)
* Other models in the family (e.g. HP86)
create a uPD78C11 derived CPU type for this purpose, with internal ROM map
use internal ROM map for other uPD78C10 chips as it's always present.
add missing NO_DUMP definitions to various games using C-Chips with correct size etc.
pump megablast through the device code as really all it ever does is bank the c-chip window and test the RAM.
* Implemented front panel mode switches/LEDs and reset switch
* Added skeleton bus for "universal" slots and connected control lines
(nw) Default keyboard mapping is annoying because left shift, Z and X
are used both for typing into the TTY and switching program bank. You're
better off changing the mapping to make it less annoying or using a
socket and talking to it with telnet.
* Renamed to MCS-40.
* Emulated 8-clock instruction cycle, interruptible at any point.
* Converted TEST input to an input line.
* Added SYNC and CM output lines.
* Added support for 4040 CY output, logical operations, extended registers, ROM banking and disassembly.
* Made I/O space mapping more flexible to support the variety of peripherals available.
* Notable missing features are 4040 interrupt and halt, and "program memory" space.
* This turns the current state save feature to a menu; one can still press 0-9, but you can also browse a menu when loading and saving state
* Fixed some issues requested by Vas Crabb
* Updated state menu to support arbitrary character slots
* WIP, transitioned 'entry_char' to std::string
Still need to address Joystick and FR keyboard concerns
* Reimplemented state save support with joystick buttons
* Changed the state menu to be "code driven" rather than "character driven"
When the menu is displayed, it will look at the filenames, and translate them to a visual representation as per the user's locale
* Vas feedback
------------------------------------
Spirit of 76 [PinMAME]
New not working clone
-----------------------------------
Black Knight 2000 (PF-1) [PinMAME]
* This turns the current state save feature to a menu; one can still press 0-9, but you can also browse a menu when loading and saving state
* Fixed some issues requested by Vas Crabb
* Updated state menu to support arbitrary character slots
sound board, completing the tromba circuit
(nw) I'm not sure whether the model works properly or not, but in the
circuit where it's used, I don't think it can work properly with the
current TTL output model. A capacitor is charged by the Q output of a
74LS74 flipflop (U3A) until the voltage passes the Schmitt trigger's
threshold, causing it to reset the flipflop. However, the positive
trigger voltage of the Schmitt trigger is 1.6V, but our TTL output model
has a high output voltage of 1.0V (see nl_base.cpp:89). I realise the
simplified model of TTL logic with high impedance inputs and outputs
behaving as though thery're loaded is convenient and fast to simulate,
but it's not detailed enough for applications like this where
7400-series chips are used in analog circuitry. This is what held me up
last time I tried adding a netlist for this sound board.
- OPENMP refactored. All OPENMP operations are now templatized in pomp.h
- We don't need thread-safe priority queue. Event code updating analog
outputs now runs outside the parallel code.
(nw)
* Tromba (trumpet) sound is not working - requires Schmitt trigger device
* Connecting cassa (bass drum) swamps other instruments so it's disconnected for now
* Mixing melody sound with speech/SFX is not done in netlist (should be)
* Relative levels of melody/speech/SFX are probably still wrong
(nw) A good test case for this is the Money Money driver (monymony).
There's a bit of buzzing on this one as well. The problem with the
cassa could be caused by running into non-ideal characteristics of opams
again (the LM3900 seems to ignore the V+ value supplied to it). When
the netlist library gets Schmitt trigger support, the tromba can be
completed. Unfortunately, the tromba is a key part of the
characteristic sound of these boards, so you really notice when it's
lacking.
(nw) It doesn't work quite right yet. The "Hammer" and "Pest" sounds
are generated by free-running 555/556 timers and gated with LM324
applifiers. For whatever reason, the netlist system produces a kind of
buzzing from the "Hammer" circuit when it's supposed to be suppressed,
and it doesn't think the pest sound should be suppressed completely so
you can always hear it at a low level in the background. The "Cheese"
circuit is a bit weird - either they're using the base-emitter junction
of a 2SC945 as a signal diode, or there's an error in the schematic
(collector is shown unconnected). Connecting this part of the circuit
causes the netlist system to hang, so R2/R3/C8/Q2 are not connected for
now.
* move rarely-used output and pty interfaces out of emu.h
* consolidate and de-duplicate forward declarations, also remove some obsolete ones
* clean up more #include guard macros
* scope down a few more things
(nw) Everyone, please keep forward declarations for src/emu in src/emu/emufwd.h -
this will make it far easier to keep them in sync with declarations than having
them scattered through all the other files.
The core changes are:
* Short name, full name and source file are no longer members of device_t, they are part of the device type
* MACHINE_COFIG_START no longer needs a driver class
* MACHINE_CONFIG_DERIVED_CLASS is no longer necessary
* Specify the state class you want in the GAME/COMP/CONS line
* The compiler will work out the base class where the driver init member is declared
* There is one static device type object per driver rather than one per machine configuration
Use DECLARE_DEVICE_TYPE or DECLARE_DEVICE_TYPE_NS to declare device type.
* DECLARE_DEVICE_TYPE forward-declares teh device type and class, and declares extern object finders.
* DECLARE_DEVICE_TYPE_NS is for devices classes in namespaces - it doesn't forward-declare the device type.
Use DEFINE_DEVICE_TYPE or DEFINE_DEVICE_TYPE_NS to define device types.
* These macros declare storage for the static data, and instantiate the device type and device finder templates.
The rest of the changes are mostly just moving stuff out of headers that shouldn't be there, renaming stuff for consistency, and scoping stuff down where appropriate.
Things I've actually messed with substantially:
* More descriptive names for a lot of devices
* Untangled the fantasy sound from the driver state, which necessitates breaking up sound/flip writes
* Changed DECO BSMT2000 ready callback into a device delegate
* Untangled Microprose 3D noise from driver state
* Used object finders for CoCo multipak, KC85 D002, and Irem sound subdevices
* Started to get TI-99 stuff out of the TI-990 directory and arrange bus devices properly
* Started to break out common parts of Samsung ARM SoC devices
* Turned some of FM, SID, SCSP DSP, EPIC12 and Voodoo cores into something resmbling C++
* Tried to make Z180 table allocation/setup a bit safer
* Converted generic keyboard/terminal to not use WRITE8 - space/offset aren't relevant
* Dynamically allocate generic terminal buffer so derived devices (e.g. teleprinter) can specify size
* Imporved encapsulation of Z80DART channels
* Refactored the SPC7110 bit table generator loop to make it more readable
* Added wrappers for SNES PPU operations so members can be made protected
* Factored out some boilerplate for YM chips with PSG
* toaplan2 gfx
* stic/intv resolution
* Video System video
* Out Run/Y-board sprite alignment
* GIC video hookup
* Amstrad CPC ROM box members
* IQ151 ROM cart region
* MSX cart IRQ callback resolution time
* SMS passthrough control devices starting subslots
I've smoke-tested several drivers, but I've probably missed something. Things I've missed will likely blow up spectacularly with failure to bind errors and the like. Let me know if there's more subtle breakage (could have happened in FM or Voodoo).
And can everyone please, please try to keep stuff clean. In particular, please stop polluting the global namespace. Keep things out of headers that don't need to be there, and use things that can be scoped down rather than macros.
It feels like an uphill battle trying to get this stuff under control while more of it's added.
-----------------------------------
Space Cyclone [David Haywood, Nicolas Francfort, Sean Sutton, Tourniquet, ShouTime, Anonymous Donator, ranger_lennier, David Stevens, Mr. Goodwraith, John Wilke, Paul Vining, Ryan Gatto, rtw, Jan Stuhler, Rod_Wod, Elliott Kipper, Greg Stout, *=/STARRIDER\=*, Ross Esposito, Paul Gaulton, Chris Heflin, Anonymous Donator from Switzerland, Fabien Marsaud, Surgeville, krick, B2K24, Anonymous Donator from Italy, David Jorge, Andrea Babich, Ciacchi Stefano, Mucci, gamez fan, Brian Troha, VFR750P, anonymous, Mr. Anonymous from Outer Space, InsertMoreCoins, Game Preservation Society, dax_PL, Russell Howard, Peter Wilhelmsen, Sébastien Monassa, f205v, Smitdogg, Gerald (COY), Brian Sutherland, The Dumping Union]
- Create device_palette_interface, which takes over most functionality from palette_device except for the initialization/decoding routines and RAM interface.
- Update screen_device and device_gfx_interface to use a device_palette_interface object rather than a palette_device. This necessitates slight alterations to a few drivers and devices.
- Modify v9938 and v9958 to use the new device_palette_interface rather than a subdevice. This entails breaking a cyclic dependency between device_video_interface and screen_device for this case.
-----------------------------------
Gaelco Championship Tuning Race [Mark F., Smitdogg, The Dumping Union]
Also renamed the driver from tokyocop.cpp to gaelcopc.cpp. Other game on this hardware is Ring Riders. (nw)
-----------
Unknown Poker Game by Chain Leisure [Gerald (COY), The Dumping Union]
My name as the copyright holder is a placeholder. Please remove as soon as someone fleshes this driver out. (nw)
nes: Fix debug output when reading iNES headers. (nw)
nes/ppu2c0x: Improved PAL clone timings. (nw)
nes/n2a03: Refactored clock definitions [includes other drivers using the
N2A03] (nw)
nes: Improved refresh rates and timings to reflect nesdev (nw)
nes: Softlist improvements and corrections [koko, mkgoogoo and others] (nw)
nes: Verified koko in the softlist as a good dump (nw)
nes: Softlist additions [subor5, subor6, subor10, subor11, subor13, doolybld]
(nw)
New not working machines added: Subor SB-486, M82 Display Unit (PAL) (nw)
nes: Marked drpcjr as NOT WORKING due to missing hardware. (nw)
New working machines added: Micro Genius IQ-501, Micro Genius IQ-502, Dendy Classic 2 (nw)
nes: marked dendy as a clone of iq501 (nw)
* tee allows two peripherals to be connected in parallel
* glinkhle is an RS232 (9600 8N1) adaptor
* bitsock sends raw assert/release line signals to/from a bitbanger device
* monospkr is a speaker connected between tip/ring in parallel and sleeve
* stereospkr is two speakers: left across tip and sleeve, right across ring and sleeve
Use glinkhle to make emulated calculators talk with cooked sockets, e.g.
mame ti82 -linkport glinkhle -linkport:glinkhle:rs232 null_modem -bitb socket.127.0.0.1:2345
Use bitsock to make emulated calculators talk with cooked sockets, e.g.
mame ti82 -linkport bitsock -bitb socket.127.0.0.1:2345
You can use tee to do stuff like listen to data activity for debugging purposes, e.g.
mame ti82 -linkport tee -linkport:tee:a stereospkr -linkport:tee:b glinkhle -linkport:tee:b:glinkhle:rs232 null_modem -bitb socket.127.0.0.1:2345
* Make device_creator a variable template and get rid of the ampersands
* Remove screen.h and speaker.h from emu.h and add where necessary
* Centralise instantiations of screen and speaker finder templates
* Add/standardise #include guards in many hearers
* Remove many redundant #includes
* Order #includesr to help catch headers that can't be #included alone
(nw) This changes #include order to be prefix, unit header if applicable
then other stuff roughly in order from most dependent to least dependent
library. This helps catch headers that don't #include things that they
use.
* Remove fake interrupts and rewrite coin handling
* Use correct CPU type
* Use screen raw parameters
* Use generic 8x8x1 gfx layout
* Update ROM filenames
- Use tilemap system to draw background/foreground characters (and use
generic gfx_8x8x2_planar layout)
- Add mario and dkong3 bootlegs running on extended hardware (color
PROMs for those haven't been dumped, using the PROMs from the original
currently)
- Update and correct dip switches
- Document tile attribute RAM and sprite RAM layout bits
- Use screen raw parameters
- Add connector layout
- Update TODO list
- Update ROM filenames
New working driver:
-------------------
Donkey Kong 3 (bootleg on Ambush hardware)
- Moved 9312 and 74279 to ttl macro library.
- Renamed TTL_9312_* to DM9312. This is more appropriate.
- Fixed a number of warnings from latest ubuntu clang-5.0.
* Use size_t for sizes and <algorithm> for algorithms
* Fix up some files that were getting linked into multiple libs
* Add missing virtual method to sh2 peripheral class
* Put shortname in driver struct for locality
* Use shared pointers in config LRU cache for safety
Per Vas' request. If the compile fails for you (i'm thinking osx and
windows native debuggers here in particular), add '#include "emu.h"'
as first include of the cpp files that fail.
Due to our use of precompilation and forced inclusion, emu.h must be
included as the very first non-comment thing we do if we want to be
sure msvc compiles are identical to gcc/clang ones. Doing it directly
instead of through an include increases the correctness probability by
a magnitude.
- Created devices for the galaxy games carts (EEPROM + Flash + PIC) and the slot(s)
- Removed code patches and emulated the PIC communication and bank switching
- Converted the blitter to a device (cesblit.cpp)
- moved the Galaxy Games from tmaster.cpp to their own driver (galgames.cpp)
Provided the PIC code for all four StarPak cartridges [Keith M. Kolmos]
New working machines
--------------------
Galaxy Games StarPak 3
[Keith M. Kolmos, Rod_Wod, Sean Sutton, Soren Skou Nielsen, Russell Howard, Francis Ramirez,
Tourniquet, BrianT, coolmod, Smitdogg, The Dumping Union, Luca Elia]
* Put Amiga keyboard implementations in a namespace
* Factor out matrix keys to a common module shared by A500/A1200
* Make new German matrix based on US matrix with Alt-chars hooked up
* Remove outdated comment
- Create EFO, Promat, Terminal, Wing projects to help reduce the weight of libmisc
- Eliminate Veltmeijer Automaten project (only two games by this company are in MAME, and one actually on Excellent System hardware)
* Added m146805 and m68hc05 to unidasm
* Made opcode tables configurable in m6805_base_device, provided tables for HMOS, CMOS and HC families
* Implemented MUL instruction, made unimplemented STOP and WAIT raise fatal error
* Added skeleton MC68HC05C4 with RAM and ROM in correct locations in memory map
Device implementations (all cpp files in netlist/devices) now should
only include nl_base.h.
Netlist implementation sources should only include "net_lib.h".
Refactored netlist.h and netlist.cpp to avoid namespace congestion in
netlist.h.
Fixed VC2015 build. (nw)
* should be #included after other headers and after optionally #defining VERBOSE
* usage samples in z80scc.cpp and m68705.cpp
68705: add lots of logging to help trace issues
m68705: expose more more internal registers through the state interface
* shows contents of registers that can't be read by program code
i8251: make receive more reliable clean up a little
zorba: meat on the bones
* create emulated keyboard device
- 88 of 96 matrix keys identified, 6 of 8 DIP switches identified, 3 of 6 outputs identified
* connect IEEE-488, RS232 and Centronics ports
* hook up all IRQ sources and connect PIT to UARTs
* more notes
osborne1, gladiatr: use input changed member (nw)
- refactored reverse polish notation evaluator into own source files.
- added function parameter to current and voltage sources VS and CS.
You can now use those to e.g. produce a sine wave.
- Changed code to allow devices to optionally be treated as dynamic or
timestepping devices.
[Couriersud]
* remove non-obvious mcu_status_r and semaphore_r members and move to drivers (varies by system)
* slap fight functionality can be safely folded into base class so do so
* remove leftover crud from driver state classes
qix.cpp, bub68705, changela: use new MC68705P3 core
* Moved 68705 devices into their own file.
* Made P3, P5 and U3 variants and made them load bootstrap ROMs.
* Implemented EPROM control (write is stubbed out with a logerror).
* Implemented differences for open drain I/O ports.
(nw) Base device with peripherals should really derive from the 6805
device directly, not the 68705 devices, as I/O ports are present on mask
devices (e.g. 6805P2). All drivers and devices that were using
M68705_NEW have been changed to M68705P5 - someone who knows the drivers
better should fix them up.
- Conversion of the Cedar Magnet board from a base device class to a mix-in interface
- Emulate EFO ZSU as main variant of the Cedar Magnet sound board
- Hook up ZSU1 to Skill Flight and Phantom Ship
- Modernize ZSU soundlatch/IRQ mechanism
- More hardware notes (nw)
- Various associated code cleanups (nw)
into these files as well. The code uses <cfenv> which is part of c++11
standard. Non-standard glib extensions are currently only used on linux
and (i386 or x86_64). (nw)
we've been sitting on this for a while, progress was shown a few years ago, but is apparently lost. Smitdogg should be able to clarify the exact part numbers, they're not readable in the pictures.
Mario driver now uses netlist audio implementation instead of discrete
implementation. The previous discrete sound emulation has not been
removed yet because it still contains a lot of documentation.
[Couriersud]
Mario driver now uses netlist audio implementation instead of discrete
implementation. The previous discrete sound emulation has not been
removed yet because it still contains a lot of documentation.
[Couriersud]
in the mizar lib. This is suboptimal, but the code seems to
crossreference across object files and from the bus code into the driver
code.
At least the source now links again. (nw)
- MSM5205 hooked up through 40105 FIFO
- Various notes based on Z80 code and schematics for related pinball sound board
40105 device improvements (nw)
- Split up configuration macros
- Tweaked device name and device type name
- New callback for automatic output write
- A few bug fixes for so_w
- Many comments and pinout added
- Allow stringing multiple callbacks together recursively. Chained callbacks will be read or written in sequence, and each can be configured with its own type and mask/shift/XOR parameters.
- Chained input callbacks cannot have overlapping masks (there's no such thing as a free multiplex). Chained output callbacks have no such restriction.
- Remove the constant parameter for the LOGGER callback type: it makes no sense for output, was always zero in existing usage, and is now unnecessary with callback chaining.
- Change LOGGER behavior for writes to log the user-defined message only if the output as masked is nonzero. With callback chaining, this can be used to monitor when individual bits become active.
- Constant read callbacks can no longer have MCFG_DEVCB_XOR or MCFG_DEVCB_INVERT specified (makes no sense in this context).
- Add a MEMBANK callback type to allow output bits to be used for bank-switching.
- Add ASSERTLINE and CLEARLINE callback types that raise or lower an interrupt line if the selected bit of the written value is active. These are intended for where periodic or ready-pulse signals from devices are used to trigger IRQs that the CPU program will independently acknowledge.
- Add MCFG_DEVCB_BIT as shorthand for masking and shifting out an individual bit for a callback.
- Removed DEVCB_LINE_DISPATCH_<n>. Where we're going, we don't need line dispatcher devices.
The incompatibility of compilers with regard to post-C90 printf string formats is shockingly bad. There seems to be no easy way to format a 64-bit value and please both gcc and clang, let alone MSVC.
-netlist: Added new devices: [Ryan Holtz]
* Intel 2102A 1Kbit (1024 x 1) Static RAM
* 74365 Hex Bus Driver with 3-State Outputs
* Generic 2- and 3-terminal Tristate device
* Note: Tristate device and 74365 do not actually tristate, they are simply a way of combining multiple outputs + chip enables.
It doesn't have much in common with the other games in the driver. Also
clean up the implementation, make spriteram 8-bit, add some hardware
info and add button descriptions.
selmenu: use LRU cache so icons don't all need to be reloaded on scroll
uismall.bdf: set default character for missing glyphs
rendfont.cpp:
* encapsulate many BDF and BDC handling details
* make file I/O 64-bit clean, check for allocation errors
* more solid BDF parser with error messages and trace logging
* fix heap smash when building bitmaps for BDF fonts
* extend BDC format to support high planes and default character
* render default character if glyph not found for BDF/BDC
- Uses the standard 6840 PTM core for sound generation
- New MM583 Noise Generator device
- New DAC-76 DAC sound
- Use resistor network values for colors
- Use bankdev device for banking
Archimedes 305, Archimedes 440, Archimedes 3000, Archimedes 410/1, Archimedes 420/1, Archimedes 440/1, Archimedes 540, Acorn A5000, Acorn A4, Acorn A4000, Acorn A5000 Alpha
- renamed a310->aa310 to avoid conflict with Amiga machines
- added all missing OS releases Arthur 0.30, RISC OS 2.01, RISC OS 3.00, RISC OS 3.10, RISC OS 3.19 (German)
- all machines default to OS (Arthur, RISC OS 2, RISC OS 3) they were shipped with
- corrected ROM labels/locations
- added default CMOS to boot to desktop
- mapped Acorn A4 Power Management extension
the bios and turn off JP1 as part of the installation. A v1 bios flash is included, but
you aren't forced to use it. [smf]
Moved G-NET protection out of ATAFLASH and into individual devices for each type of card [smf]
Implemented enough analogue control reading on ZN1/ZN2 for RC De Go & Go By RC [smf]
Fixed ZN1/ZN2 DSW descriptions [smf]
Added build dates and times to G-NET game descriptions [smf]
New machines added or promoted from NOT_WORKING status
------------------------------------------------------
Shikigami no Shiro - internal build (V1.02J 2001/09/27 18:45) [rtw, ShouTime, smf, O.Galibert]
Go By RC (V2.03O 1999/05/25 13:31) [smf]
RC De Go (V2.03J 1999/05/22 19:29) [smf]
05928: nbajamex: game crashes / nvram gets corrupted
- Emulated the Acclaim RAX sound board, adding sound to Batman Forever and NBA Jam Extreme [Phil Bennett]
- Hooked up extra NVRAM in NBA Jam Extreme [Phil Bennett]
Use standard uint64_t, uint32_t, uint16_t or uint8_t instead of UINT64, UINT32, UINT16 or UINT8
also use standard int64_t, int32_t, int16_t or int8_t instead of INT64, INT32, INT16 or INT8
with the following games
Time Scanner (TS 2.0, Magnet System, prototype)
Exzisus (EX 1.0, Magnet System, prototype)
Xain'd Sleena (SC 3.0, Magnet System, prototype)
this is a checkpoint, there is a sizeable ToDo list but I think this is a good enough state for initial inclusion before working out the remaining issues. ArcadeHacker has the hardware working for questions etc.
I would especially appreciate help with sound (haven't a clue how it hooks up, tried lots of things, no luck) and some help in going over the CPU comms, especially with the sprite CPU as I think I must be missing something important. Likewise help from somebody more familiar with the floppy code from MESS so that it can use that, I had no luck in getting it to work with the copy protection or from a rom region, I've kept all floppy related code in a device so it's very easy to swap out so for now what I've got isn't intrusive.
note, very weird idea for a system, they've ported 3 arcade games from other manufacturers, original titles were advertised, but it's likely nothing more of the system exists.
the system uses 5 PCBs, one Z80 on each and instead of having dedicated sprite / tilemap chips they have the Z80s doing software rendering, using 8bpp framebuffers. 2 of the boards are for background planes, 1 of the boards is for sprites. The hardware has various memory expansions which look like afterthoughts as they're addressed in strange ways.
ataxx: Fixed missing sound channel caused by one dac not being hooked up and one dac being hooked up to two addresses.
bestbest: Fixed high pitch screech caused by incorrect addressing (two dacs weren't hooked up and two were hooked up to two addresses).
cchasm: Fixed static noise generation caused by feeding the same bit to both dacs.
cheekyms: Slightly improved sound by implementing sound triggers as 8 x 1 bit dacs instead of 1 x 8 bit dac.
galeb: Fixed sound by implementing it according to http://www.deltasoft.com.hr/retro/galebemu.htm & implemented enough of LOAD/SAVE to stop it hanging.
hard drivin: (all games in driver) Improved 12 bit controls, although centre still goes out of sync.
mea8000: Converted to a sound device.
megaphx: Fixed noisy samples due to wrong format.
microvsn: Fixed sound pitch caused by incorrect usage of write_signed8().
seicross: Changed to a 4 bit dac as samples are packed nibble.
spaceg: Preliminary sound using space invaders samples.
suna8: Changed to a 4 bit dac as samples are packed nibble.
vcombat: Fixed static during machine gun fire due to incorrect dc offset removal.
vectrex: Fixed noisy samples due to wrong format.
wheelfir: Fixed sound, eeprom & analogue steering wheel and brake pedal.
this is similar to, but not identical to goldstar.cpp / skylncr.cpp. it might be possible to merge it in, however my gut feeling is that said driver should be split up into different machine types all using some generic but fleixlbe video device that can handle these 8x8 tiles, 8x32 reel cases as most of them are based on the same basic concepts, just with their own tweaks.
reels, sounds, inputs are not hooked up here.
see
http://forums.bannister.org/ubbthreads.php?ubb=showflat&Number=107569&page=1
for PCB information.
Mahjong Senpu [system11. David Haywood]
displays the game image, upside down, no palette for now, no inputs for now, no sound for now, going to continue work on it.
-Wno-missing-braces is unfortunately now necessary to avoid errors on almost every single use of the std::array initializer in devfind.h. (Apparently C++14 does make double braces optional for std::array initializers, but clang and GCC's -Wmissing-braces never took that into proper account, which is why GCC may still have it disabled by default.)
Several other Clang-specific warnings have been undisabled; some might perhaps need to be locally reenabled if legacy 3rdparty code or sundry OSD includes happen to disagree with them. The only warning to require any code changes was -Wabsolute-value, which seems to have caught a minor render bug (and nothing more).
Use: ./mame vgmplay -bitb file.vgm/vgz
Lots of chips missing, no visualization, no control of anything, no
volume control either, and no sound shutdown on end of file.
Turbosub had a ROM_COPY declaration with an expression ('ROM_COPY( "main_code", 0x18000 + 0x2000,...) and this simply did not work with the new model. This required changing ROM_* declarations to more resemble how they used to be and to perform the conversion on load.
Air Raid, Street Fight and Dark Mist all basically use very similar video systems (4 layers, 2 of them being ROM based tilemaps, a CLUT prom for each layer which controls colours and transparency handling)
this takes some steps towards allowing a common implementation of it.
This is a redo of the split first submitted in #137, with the following differences:
* The newly refactored rom_entry data structure is used
* I've kept the refactored softlist code in src/emu, in order to defer the mechanical process of moving it
* I've kept includes of softlist[_dev].h out of diimage.h, so that changes to either do not trigger an emu.h recompilation
* Obviously, this goes against the latest master
* Mark lots of things constexpr in attotime and turn macros into functions
* Add base classes for HLE matrix keyboard and buffered RS232 device
* Make generic keyboard/terminal more usable
* Keyboard has configurable typematic delay/rate
* Keyboard has selectable JIS/ANSI layout
* Keyboard handles simultaneous keypresses more intuitively
* Keyboard uses meta to set high bit
* Terminal has configurable auto LF on CR, auto CR on LF and local echo
* Terminal has audible bell
* Untangle Olivetti M20 keyboard from generic_keyboard
* Add notes to Olivetti M20 keyboard emulation
* Make Olivetti M20 keyboard match physical layout
* Untangle RM Nimbus keyboard from generic_keyboard
* Fix natural keyboard mode with RM Nimbus
* Untangle x68k keyboard from generic_keyboard
* Improve x68k key names and mapping
* Improve x68k typematic behaviour
* Untangle QX-10 keyboard from generic_keyboard
* Keep NGEN keyboard barely working
The keyboard should communicate at 1,200 Baud, but due to bugs in the SCC
it's set to 9,600 Baud. The sun4c machines program the Baud rate
generator dividers for the serial ports with 00:0e and the dividers for
the keyboard/mouse ports with 00:7e. Therefore the ratio of Baud rates
should be (0x7e + 2) / (0x0e + 2) = 128 / 16 = 8. However both the RS232
ports and the keyboard/mouse ports run at 9,600 Baud, when the
keyboard/mouse ports should run at 1,200 Baud (which is 1/8 of 9,600 which
matches the ratio of the divider values).
I've artificially limited the rate the keyboard can transmit at to be no
faster than it could at 1,200 Baud using a timer. I can remove this hack
once we get correct SCC divider behaviour.
I attempted to hook up the SCC interrupts to level 12 as specified in the
SPARCstation-1 Programmer's Model in the table on Page 19. No interrupts
seem to be generated, so either I've screwed this up somehow, the Sun
isn't enabling interrupts, or there's another bug in the SCC emulation.
Sorry if I've screwed it up - I won't be offended if someone replaces it
wholesale.
The keyboard receives the reset commands from the Sun and sends back the
self test pass response, but the SCC seems to get a buffer overrun error.
So it appears that the received data isn't being read out. I haven't been
able to work out why.
* .h -> .ipp for things that aren't really headers
* make more stuff in selmenu private
* move the remembered driver/software associated with the snap to the cache object
* start cleaning up constness in datfile manager - it's still a mess of non-const statics
* Split out main menu and dat box drawing from base class
* Make a bunch of class statics proper per-machine persistent objects
* Object lifecycle fixes
- Button mappings completely reworked: grey bidding/suit selection buttons classified as keypad inputs and put in correct order, and other buttons as console-standard Start, Select, Button 1-2
- Inputs now read through PIO instead of RAM addresses, making them less hypersensitive
- Manufacturer/publisher is Unicard, as manuals and system/cartridge labels clearly state
- Added release years for some common cartridges
- (nw) Link bbcbc in its own library rather than the unrelated libacorn ("make clean" strongly recommended)
- Create a SG-1000 expansion slot.
- Hook up the SG-1000 expansion slot to sg1000.cpp and sms.cpp (sg1000m3).
- Split the sk1100 code from sg1000.cpp and attach it to the new expansion slot.
- Create a new FM Sound Unit device and attach it to the new expansion slot.
- For the sc3000 driver, re-add sk1100 as a fixed SG-1000 expansion device.
- Add sg1000 software list to sg1000m3 and Japanese/Korean SMS drivers.
sms.cpp: implemented some new findings [Enik Land]
- Remove some mirrors for ports $DC/$DD on SMSJ based on Charles' hw tests.
- Add basic C-Sync callback to 315_5124.cpp, based on Charles' hw tests.
- Add built-in Rapid Fire (uses C-Sync) for SMSJ and Korean SMS1 drivers.
- Add new SMS drivers due to XTAL differences:
sms1br - Tec Toy Master System I (Brazil)
sms2br - Tec Toy Master System II (Brazil)
smsbr - Tec Toy Master System III Compact (Brazil)
sms1paln - Tec Toy Master System I (PAL-N)
sms2paln - Tec Toy Master System II (PAL-N)
smspaln - Tec Toy Master System III Compact (PAL-N)
Brazil is PAL-M TV system, but I decided to call it by the
country name, seems to be better recognizable and for
emulation looks more like a NTSC system. PAL-N is used
in Argentina, Paraguay and Uruguay and looks closer to
the European PAL system when compared to PAL-M.
- Replaced shared_ptr by unique_ptr.
- Better seperation of setup_t and netlist_t.
- Fixed bugs in rdtsc code. Refactored timer code.
- Simplify conditional activation/deactivation.
- Introduced HINT(device, hint) to clarify that hints are inheritent
and not specific to devices.
- Added improved profiling support to netlist. Statistics output now
proposes devices for which whole device activation/deactivation be
disabled. No significant improvement for pong, but breakout
experiences a 10% improvement.
- Moved options code from include to cpp file.
- Minor modifications to 7493 and 9316
- Introduced perftime_t and perfcount_t for gathering statistics. These
templates do not create any code if statistics are not kept.
- Make help2man ./nltool produce usuable output.
- More truthtable refactoring. Removed half-finished code for internal
state support. As implemented, this would have had no support for
timing delays.
[Couriersud]
Kyuukoukabakugekitai - Dive Bomber Squad [Andy Welburn, ShouTime, Smitdogg, Haze, Imhotep, Ryan Holtz, hap, Zhivko Dimitrov, spogghi, ANY, Arjen Hoekman, Arcade Addict, krick, Dullaron, Eddie, f205v, rtw, Rod_Wod, Fabien Marsaud, InsertMoreCoins, Jan Stuhler, trap15, Macaw, Team Japump, Brandon Munger, Juan Manuel Gutierrez, abelardator2, Jordi Bosch Creus, haynor666, Nestor Acebo Jimenez, Carl Perry, Jeremy McElroy, Steven Boswell, JJaVMeTaL, Steven LeMaire, Matthew Shultz, Mark Riley has no toaster, Carlos Gutierrez, Bjorn Stahl, Aldo Vittorio De Luca, Bruno Celsi, Philip Zumbrun, cornishdavey, Stefano De Dionigi, motoschifo, Mamesick, Daniel Hitchcock, Patrick Wheeler, bisus, desodeso, Swos, Don Zaucker, Tox Nox Fox, Zak0077, giuppo, Moket, Frankie, robindan77, biasini, Dr_Zero, motoschifo, Mameremember, John Wilke, Sean Sutton, Renato Mucciarelli, Berlioux Julien, Lior Aouate, The Dumping Union]
Three patches with code cleanups to the OSD layer [
Giuseppe Gorgoglione]
* Fix debugging code in font_dwrite.cpp
* Introduce dynamic_module
* Remove Direct3D abstraction layer
* git version is set by top-level make, not just when GENie runs
* can set IGNORE_GIT=1 for make to ignore git
* git ignored/unavailable uses "unknown" in version string
* mark modified trees as dirty
* note that version now comes from makefile
- Dead code removal and minor refactoring.
- Simplify. Align naming with stl. Fix somed pedantic warnings.
- More STL compatability.
- Remove ATTR_HOT and ATTR_COLD. Refactored netlist_time.
- Fix long standing workaround which would ignore policy of change-only"
propagation.
- Rewrote for loops to use auto : semantics.
- Truthtable cleanup. (nw)
- Get rid of nl_math. Remove nl_util.h and moved contents to
plib/putil.h.
- Fix standalone build. Refactor ptypes.h.
[Couriersud]
allow in-place creation (for increased locality) of netlist classes.
Main use is in truthtable class.
- Remove PLIB_NAMESPACE macros.
- Remove namespace macros. Use explicit namespace declarations.
- Moved device definitions into cpp files.
- Moved more device definitions into cpp files.
- New prefix "nlid" for include files flags purely internal include
files not to be leaked into userland.
- Fix factory code.
* pet_cass.xml
- Added Supermon (Toronto PET User Group) [Ken White]
- Replaced bad dump of Side B of Squiggle, Big Time / Monitor (the m command in the monitor now works correctly) [Ken White]
=======================
V-Tech V-Smile Pro [TeamEurope]
out of whatsnew: also added a couple of discs which were dumped by
TeamEurope as well, and converted other German discs to CHD v5.
- Separate watchdog implementation from running_machine (once again) and driver_device
- Old-style methods, now hidden behind #ifdefs, will probably be safe to remove soon
exploit slot devices: [Fabio Priuli]
- moved cart-specific components to the carts itself removing
the fake protection devices from the main system, since they
never belonged there
- removed hacky rom region destruction/construction when a
new cart is inserted, replacing it with proper bank pointers to
the carts (except for ymsnd and ymsnd.deltat region which
will require modernization of the ym devices)
- started re-organization of bootleg boards emulation, so to
reduce the need of collapsing everything into a single cart
type with multiple protection devices, more work is needed
neopcb.cpp: moved to a separate source file the emulation for
JAMMA PCB versions of a few neogeo games, since they don't
have a cartslot. [Fabio Priuli]
neogeo.xml: added information about Japanese titles and
release dates to the software list and aligned the list to the
driver. [Fabio Priuli]
(as a result, moved it to a new skeleton driver, and moved the softlist connection for the original machine there too)
not started to hook anything up yet.
cleaning up the related code. [Fabio Priuli]
saturn.cpp: added emulation of the SegaTap adapter (4 controllers)
and Sega Multitap adapter (6 controllers). Saturn Bomberman
can now be played as intended. [Fabio Priuli]
through slot devices. If you want to launch janshin in the
multislot driver (neogeo) you shall now prescribe
-edge "" -ctrl1 mahjong
and set accordingly the dipswitch. The janshin driver already
comes pre-configured in the proper way, instead. [Fabio Priuli]
Some systems like Debian, Ubuntu and other derivatives, expect qtchooser
will be used to select the appropriate Qt version, as Qt5 and Qt4 can
co-exist.
As MAME's build system does calls to moc and qmake directly, and Qt5 is
now the required version for the debugger, pass -qt5 to all moc and qmake
calls to avoid the build fail.
you can now configure the controllers available in the multicart
driver (neogeo) with the -crtl1 and -ctrl2 options. when you run single
game drivers (e.g. mslug, or kof94, etc.), instead, a unique controller
is available and cannot be modified. [Fabio Priuli]
intvecs: Converted hand controllers, keyboard and synth to be slot devices,
by using a temporary hack to workaround the impossibility to plug the same
device into 2 different slots as these keyboard require. [Fabio Priuli]
out of whatsnew: in the long term we need to come up with a core solution
for these devices that occupy multiple slot devices at once (another one is
the VCS Compumate which plugs into both VCS control ports), because the
hack I used (a "fake" control port which acts as a passthru for the two real
control ports) is not really satisfactory. However, current solution is better
than the selectable controllers we had, which were (ab)using
PORT_CONDITIONs...
- removed inclusion of SDL headers in all headers.
- replaced those by forward declarations and in one case by a wrapper
class (for a typedef struct).
- added -Wno-strict-prototypes to 7z build (gmake target)
It's damn slow, ~50ms/frame on cdkong. Caching and/or hw accel will
solve that easily. It doesn't look very good, nanosvg need better
anti-aliasing. It also doesn't do texturing very well and images not
at all, so some of our current svgs won't look good. But all that's
fixable.
Super Game (Sega Master System Multi-game bootleg) [Astroblaster]
unfortunately the dump is incomplete, there's a 512KB MASK rom that hasn't been dumped.
(it also probably uses an MCU for the timer / credit logic, but we can simulate that)
Extend USE_SYSTEM_LIB_* to support providing the library name and include directory.
To link against system specific lib names and header path: (ref #711)
USE_SYSTEM_LIB_LUA=lua5.3:/usr/include/lua5.3
Spartan X (Tecfri hardware bootleg) [farzeno, rockman]
put this is a new driver because if the other Tecfri boots are anything to go by the modifications will be gross, still need to pull spyhuntpr into it's own driver too after finding out just how different it is to the original.
- rename netlist_analog_t to analog_t
- straighten object model
- reduce access to member variables
- use pvector<analog_net_t::list_t> for groups.
- simple coverity fixes.
* Allow std::string to pass through core_file unmolested (reduces temporary allocations)
* Make zip/7z instances of same class with uniform interface
* zippath browsing is broken at the moment
This is another step towards transparent archive support. It's now
possible to access zip and 7z archives with the same code. Nothing is
taking advantage of it yet. There's now some very similar code in
fileio.cpp and clifront.cpp that could be folded at some point.
Make avi_file a class that's held with smart pointers, encapsulate various AVI I/O structures
Make zip_file and _7z_file classes rather than having free functions everywhere
Hide zip/7z class implementation behind an interface, no longer need to call close() to send back to the cache
Don't dump as much crap in global namespace
Add solaris PTY implementation
Improve variable expansion for SDL OSD - supports ~/$FOO/${BAR} syntax
Rearrange stuff so the same things are in file module for all OSDs
Move file stuff into its own module
7z/zip open and destruct are still not thread-safe due to lack of interlocks around cache access
Directory functions still need to be moved to file module
SDL OSD may not initialise WinSock on Windows
Android (early build?) [Ryan Holtz]
note this is NOT the same build of the game that Chris Hardy has, his looks more polished / finished, so this seems to be an earlier build / prototype. I don't know if the hardware is the same or not.
Still working on this.
tandy1t: make the shared vram actually work and use banking (nw)
--
Some of the tandy's will show garbage on the screen when booted, it's the memory test overwriting the shared vram
* Make stream_format return characters printed
* Add iostreams with std::vector storage
* Move to type-safe templates for logerror and popmessage
* Remove now-unnecessary I64FMT from calls to logerror/popmessage
* Put some lib/util stuff in util:: namespace
* Some fixes to Japanese translation
Ted Green