* hp9825: optional ROM cartridges added (9825b only, ATM)
* hp9825: optional ROMs added to 9825t, added support for banked ROMs
@5c00, separated RAM & ROM spaces in 9825t
* hp9885: added missing post-amble when writing sectors on disk
* hp9825: added acknowledgments to comments (nw)
* hp9825: changes requested by V.Crabb (nw)
* Allow specifying NO_OPENGL manually
* Switch bgfx to OpenGL ES renderer if NO_X11 is specified
* Only link against EGL when NO_X11 is specified on linux, netbsd and openbsd
* Only switch bgfx to OpenGL ES on linux, netbsd and openbsd
* Indentation fix
* Add workaround for imgtool and jedutil failing vs2019 debug builds with /ZI
* No longer allow msvc build to fail
* Enable tools build for travis to make it more useful
* Switch travis to Xcode 11 in order to fix nltool linking failure
* Prefer 64-bit compiler with VS 2019 too
* Setting PreferredToolArchitecture to x64 is not needed, genie puts it into the project files for vs2015 or later
* OPTIMIZE=1 build is faster that OPTIMIZE=0 for some reason. So fast in fact, that TOOLS=1 can be enabled without hitting the 60 minute timeout
* Switch MINGW build to VS 2017 image until appveyor figure out why builds on VS 2019 are almost twice as slow
* Run pacman twice to account for core system upgrades
- solver now uses dynamic allocation on systems larger than 512x512
- fixed osx build
- moved nl_lists.h classes to plists.h
- fixed netlist makefile clint section
- readability and typos
* Sync with bgfx upstream revision b91d0b6
* Sync with bx upstream revision d60912b
* Sync with bimg upstream revision bd81f60
* Add astc-codec decoder
* Rename VertexDecl to VertexLayout
* Rename UniformType enum Int1 to Sampler.
* Add NVN stub
* Fix unused-const-variable error on macOS
* Drop redundant explicit language parameters
buildoptions_cpp are only applied to c++ files and buildoptions_objcpp are only
applied to objective c++ files. As such, hardcoding -x offers no benefit while
preventing overrides (such as one needed by 3rdparty/bgfx/src/renderer_vk.cpp on
macOS) from working.
* Re-introduce -x c++ in places where C code is compiled as C++ to prevent clang from throwing a warning
* Build bgfx as Objective-C++ on macOS
It is needed due to included headers
* Enable Direct3D12 and Vulkan bgfx rendering backends
* Enable building of spirv shaders
* Properly escape /c in cmd call
* Comment out dx12 bgfx renderer
* Honor VERBOSE setting during shaders build
* Only invert hlsl shader XYZ_TO_sRGB matrix for opengl
* Add spirv shaders
* OpenGL ES needs transposed matrix too
* Metal needs transposed matrix as well
* Re-write makedep.py for better performance and better parsing front-end
* Make srcclean deal with kinds of preprocessor abuse I never want to see in real life
(nw) The new parser front-end is better at recognising C++ syntax and
also substantially faster - bootstrapping a single-driver build should
be noticeably quicker. Having a single parser for C++, .lst and .flt
files also gets us a bit closer to making it simpler to create custom
subtargets.
(nw) This has been a long time coming but it's here at last. It should
be easier now that logerror, popmessage and osd_printf_* behave like
string_format and stream_format. Remember the differences from printf:
* Any object with a stream out operator works with %s
* %d, %i, %o, %x, %X, etc. work out the size by magic
* No sign extending promotion to int for short/char
* No widening/narrowing conversions for characters/strings
* Same rules on all platforms, insulated from C runtime library
* No format warnings from compiler
* Assert in debug builds if number of arguments doesn't match format
(nw) Also removed a pile of redundant c_str and string_format, and some
workarounds for not being able to portably format 64-bit integers or
long long.
This will compile, link, and run a driver all the way to the first info screen, provided you use -video bgfx.
However, although there's a valid NSWindow created, it never actually appears on screen for unknown (but likely silly) reasons.
Inputs are not implemented and fullscreen exists but is untried.
* hp9825: fixed a bug in 9825t
* hp9845: TACO driver re-written from scratch, DC100 tape separated into
a new device, various adaptations
* hp9845: "new TACO" renamed to just "TACO"
* Made some experimental work with menghong based HW, allowing crzyddz2 to boot and improving menghong colors;
* Internalize video and audio components inside the SoC;
* Wrote a preliminary UART subdevice;
* Made external video clock to be settable by the host driver;
* spectrum bus : rename beta.cpp to beta128.cpp as the original beta is somewhat different (nw)
* (nw)
* start making a device for the actual original beta disk interfaces (nw)
* flesh out beta stuff a bit (nw)
It appears that it is sufficient to include `-s USE_SDL_TTF=2`, and
emcc links in the SDL2_tff library, and it does not like attempts to
link this twice.
The current Emscripten release is not happy with the use of
"-s ERROR_ON_MISSING_LIBRARIES=0" as a link option, it gives an error
stating that all libraries must now be present, so remove that use.
This leaves a missing 'util' library. This did not appear to be
needed on the few builds I have tried, and this patch avoids adding
this library for asmjs.
* Improved encapsulation between video and machine SoC periperals;
* Split up HWs in individual files where they don't belong to Crystal System HW, makes future development easier;
* Untangled reads/writes to draw/display bankswitches from screen_update, now they can be unthrottled safely;
* Added CRTC screen raw parameters;
* Add DMA hold feature and clear irq on mask writes, specific for P's Attack;
* Improved Cross Puzzle flash loading, currently failing at POST for a SPU error;
nexus3d.cpp: add some preliminary work, currently does some VRender3d pipeline fill with a debug trick [Angelo Salese]
(out of whatsnew)
Some stuff definitely needs fine graining, like removing the few lines that are still necessary to configure the VRender0 from driver files, which I'm gonna do in my next feature branch.
Split out the floppy disk controller from the swtpc09 machine, adding it to
the ss50 interface. The DC5 is compatible with both the SWTPC 6800 and 6809
systems, supporting the 4 and 16 byte I/O interfaces respectively, via a
jumper setting, so can be used on the MAME swtpc and swtpc09 machines. The
DC5, like the DC4, supports double sided and density disks, and claimed
backward compatibility with the DC1, DC2 and DC3.
Split out the PIA IDE hard disk interface from the swtpc09 machine. This
support appears to have been incomplete or to have bit rotten, and has been
updated and tested lightly with FLEX9.
* Enable precompiled header usage in the Visual Studio compiler
But only for libraries emu frontend precompile dasm optional
Also add emu.h include to hpcdasm.cpp
* Include emu.h in some disassembler sources to use precompiled headers
* Remove debug message
The UniFLEX disk format is not compatible with the Flex format. Significantly it
does not use a mix of single density for booting on some double density disks
which makes it simpler - hardware required a new boot ROM to run UniFLEX.
Further, the UniFLEX sector size is 512 bytes versus 256 for Flex, and the
UniFLEX 'SIR' info sector record is completely different to the info on Flex
disk, and the file system format is also not at all compatible.
Thus the UniFlex format can rely largely on the WD17xx format, with an
overload to handle the sector numbering on the second side continuing from the
first side (one feature in common with the Flex format). This gives a quick
'save' capability and shares code.
Support for 8" disks is included as this was the initial distribution format
and the only one found so far.
* gdbstub: added new GDB stub debugger
This debugger can be used to connect to an external debugger that
communicates using the GDB Remote Serial Protocol, such as GDB itself
or many other GDB frontends.
Currently i386 (ct486), arm7 (gba), and ppc (pmac6100) are supported.
* gdbstub: enable GDB stub debugger in mac and windows builds
- Replace additional driver RAM with S-100 bus
- Convert Video Terminal Interface into a S-100 bus device
- Add skeleton S-100 bus device for SSSD disk controller
- dxsdk was missing from includes
- winmm was missing from libs
- narrowing warning was silenced for VS, but not from vsllvm, where it leads to an error in menu_video_options::handle()
* hp9845: fixed handling of optional ROMs (nw)
* z80sio: massive enhancement to Z80 SIO driven by HP98046 test sw
* hp9845: implemented the HP98046 serial I/O module
* smartfp generate an interrupt, add a palette (nw)
* video registers look a lot like the spg220 hw here (nw)
* getting ready to split into video (nw)
* code shuffle (nw)
* shuffle (nw)
* (nw)
* (nw)
* (nw)
* unsp refactoring / tv game work (nw)
* unsp refactoring / tv game work (nw)
* srcclean (nw)
* more ops (nw)
* (nw)
* (nw)
* guesses (nw)
* more guesses (nw)
* (nw)
* Start fixing OS9 disk handling
* Got it working, now need to refine and test
* Almost complete. Doing more testing...
* Tested aginst a varient of sotware. Solved bug. Cleaned up tabs.
* Turned on sector interleaving in OS9_DSK and retested.
On Linux, enable Xinput support by default. The Xinput lightgun driver is the
only reliable+accurate method to use lightguns on Linux, we should enable this
by default to reduce the friction for Linux Lightgun users. This should have no
effect on users of Windows/Mac etc.
- it's a newer SoC (with a lot more capabilities, eg rotate, zoom, twice the sound channels)
- it uses an updated unSP core (with some extra opcodes)
also made the modifications needed to allow for extension of the unSP + disassembler once we've worked out what the extra opcodes are.
* spg110: jak_capb misc guesses (nw)
* misc priority stuff (nw)
* tweaks (nw)
* more tweaks (nw)
* small spg2xx refactor (nw)
* some spg2xx refactoring (nw)
* (nw)
* tidy (nw)
* these have all been moved out into modules (nw)
* sprite work in progress (nw)
* (nw)
* spg110: shift some stuff around and split into files here too
* (nw)
* (nw)
* (nw)
* sprite improvements
This effectively reverts b380514764 and
c24473ddff, restoring the state at
598cd52272.
Before pushing, please check that what you're about to push is sane.
Check your local commit log and ensure there isn't anything out-of-place
before pushing to mainline. When things like this happen, it wastes
everyone's time. I really don't need this in a week when real work™ is
busting my balls and I'm behind where I want to be with preparing for
MAME release.
- added MOSFET model. Currently capacitances are not modelled.
This is a 3-pin model (Bulk connected to Source) with provisions to
extend it to 4-pin at a later stage.
- Add a capacitor generic model which is charge conserving.
Switch netlist to use this model instead of constant capacity model.
- Start putting constants into a central place.
Please expect minor timing differences due to a different numerical
path.
The cmos inverter example illustrates the analog implementation of a
cmos inverter gate. These were used a lot back in the 70s/80s to
generate sinus waves. The model should also be able to better emulate
4066 analog switches.
The addition of a relatively simple capacitor model is planned at a
later stage.
Expect everything from the MOSFET model at the current stage. Wrong
results as well as convergence issues and crashes.
.
A single 64K 2-way set associative cache
Used for both instructions and data
Enabled only for addresses in the first megabyte
Works always in writeback mode
.
It is needed by the nforce motherboard bios that uses it to simulate a
block of ram at address d0000 before ddr ram is configured
* SPG2XX - Make audio emulation a subdevice
(I need to reuse some of it for SPG110)
* these will end up in different places on spg110 so split the handler (nw)
* refactor a little for cleaner use later (nw)
* realign logging with function names (nw)
* (nw)
* (nw)
* recent change in audio_beat_tick appears to break "icanpian jjs" seems unintentional? (MG please verify)
also documented an existing suspicious use of 'channel' in code.
* use channel_bit here instead, seems more logical (nw)
* reorganize code here a bit too (nw)
- 80 column card with SDX in CP/M mode.
- ROM/RAM banking fixed for CP/M, and MTX500 now correctly detected.
- Support for Type 03 and Type 07 .mfloppy images.
- Added alternate MTX2 romset (German).
- Keyboard ROM now selected in Configuration.
- Quickload .RUN files.
* Document cross-compilation options
* Use lowercase for some libraries that are lowercase in system32 on Windows anyway
* Make USE_BUNDLED_LIB_SDL2=0 not use the bundled SDL
New WORKING machines
---
Ms. Pac-Man 5-in-1 (Ms. Pac-Man, Pole Position, Galaga, Xevious, Mappy) (JAKKS Pacific TV Game, Game-Key Ready) [Sean Riddle, Peter Wilhelmsen, 19 external donators]
Disney Princess (JAKKS Pacific TV Game, Game-Key Ready) [Sean Riddle, 20 external donators]
New WORKING Software List entries
---
jakks_gamekey_nm:nrxdig New Rally X & Dig Dug [Sean Riddle, Peter Wilhelmsen, 19 external donators]
note, Pole Position is not really very playable at the moment due to raster rendering glitches, the rest are, aside from some obvious sound issues (nw)
New machines marked as NOT WORKING
---
Wheel of Fortune (JAKKS Pacific TV Game, Game-Key Ready) [Sean Riddle, 20 external donators]
There is a video rendering glitch (lkely another off by x lines raster issue) causing the letter selection text to not render properly, it appears the letters scroll instead of the text scroller below, which doesn't. (nw)
-spg2xx: Make rowscroll offset configurable, can't find register to control it, but JAKKS games need 0, while the chinese stuff needs 15 (nw)
-jak_wof: Marked as working, analog wheel isn't emulated, but is optional (I don't see where / how it maps) (nw)
-jak_wof: Improved inputs (nw)
-gamekeys now save to the gamekey seeprom not the system one (nw)
WIP checkpoint: while I believe it's largely accurate (and very slow), neither jazz nor sgi systems can fully boot yet using this device, so it remains experimental.
This implementation should go away when it has helped identify the improvements required for mips3.
- Added Slogger Plus 2 Expansion, Acorn Tube Interface and P.R.E.S. Advanced Plus 5 cartridge devices.
- Use derived 16Mhz clock on expansion bus and cartridge slots.
- Removed MCFG and added devcb3 in expansion and cartridge devices.
* Split up the different parts of ICO loading in the menus (locating files, scaling, drawing, etc.)
* Added icon support to software selection menu
* Added support for more ICO file variants, including PNG-in-ICO (new DIB parser is overkill for ICO but I can factor it out for BMP loading at some point)
* Added favourites filter for software menus - includes software that's favourited on any system, so GBC includes DMG favourties and vice versa
* Eliminated unnecessary member variables and O(n) walks in software selection menu
* Made the menus' cached texture structures a bit more efficient
-vsmileb: Found enough port bits to show the VTech logo and V.Smile Baby intro. No game boots yet. [Ryan Holtz]
-spg2xx: Added separate logging for external interrupts and address mapping. [Ryan Holtz]
- 32K ROM slots in B+ and Master series.
- PALPROM carrier boards from Computer Concepts, Watford Electronics, etc.
- Real Time Clock ROM devices from Solidisk and PMS.
- UserRAM sideways RAM from Acorn User.
- MRM E00 DFS.
* new NOT WORKING --- Classic Arcade Pinball (JAKKS Pacific TV Game) [Sean Riddle, David Haywood]
* move to new driver instead (nw)
* minor note updates (nw)
* map inputs in matelcs (currently needs a hack to boot, so won't show anything yet) also removed a pointless bitswapping in a read function for some other stuff in the driver, and just correct the ports instead
* fix a typo (nw)
* note (nw)
- Add custom keyboard port and emulate most of the Expanded Typewriter Keyboard
- Add unidirectional printer port
- Use addressable latch devices to control various things, including disabling display during RAM test
- Hack to pass non-volatile memory test on uts10
* nes_vt: Add support for second APU and VT03 PCM
* nes_vt: Add support for VT3x PCM in DGUN2573, etc
* nes_vt_apu: Tidy up after rebase (nw)
Signed-off-by: David Shah <dave@ds0.me>
* nes_vt_apu: Add IRQ support
Signed-off-by: David Shah <dave@ds0.me>
* nes_vt_apu: Remove debug printing (nw)
* nes_vt_apu: Fix indentation (nw)
* XaviX work
new Software List items [Sean Riddle, David Haywood]
ekara_japan_d:dc0002 BAT Volume 6 (Japan) (DC0002-BAT)
ekara_japan_d:dc0005 TV Pop Volume 9 (Japan) (DC0005-TPJ)
ekara_japan_p:pc0001 BHT Volume 4 (Japan) (PC0001-BHT)
ekara_japan_p:pc0003 ENB Volume 1 (Japan) (PC0003-ENB)
ekara_japan_g:gc0001 BAT Volume 1 (Japan) (GC0001-BAT)
ekara_japan_g:gc0016 TV Pop Volume 5 (Japan) (GC0016-TPJ)
ekara_japan_web:ekaraweb12 e-kara Web cartridge 12M (blank) (Japan)
new clones
e-kara (US?, NTSC, set 2) [Sean Riddle]
enable support for 'p' type cartridges for use with ddrfammt [David Haywood]
various documentation improvements [Sean Riddle, David Haywood]
(there are also 3 bad dumps, currently commented out, will replace later)
* improved filenames (nw)
* for later (nw)
* checkpoint (nw)
* seeprom stuff (nw)
* (nw)
* correctly saves, does not correctly reload, also promote popira and ddrfammt to working
* new Software List entries [Sean Riddle, David Haywood]
ekara_japan:ec0001 J-Pop Mix Volume 1 (Japan) (EC0001-JPM)
ekara_japan:ec0032 ANM Volume 2 (Japan) (EC0032-ANM)
ekara_japan:ec0037 ENK Volume 4 (Japan) (EC0037-ENK)
ekara_japan:ec0046 J-Pop Mix Volume 20 (Japan) (EC0046-JPM)
ekara_japan:ec0005 J-Pop Mix Volume 5 (Japan) (EC0005-JPM)
ekara_japan:ec0007 1976-78 Volume 1 (Japan) (EC0007-G76)
ekara_japan:ec0079 ETZ (Japan) (EC0079-ETZ)
ekara_japan:ec0082 Matthew's Best Hit Selection (Japan) (EC0082-MBH)
ekara_japan:ec0009 ANM Volume 1 (Japan) (EC0009-ANM)
ekara_japan_en:en3 EN-3 (Japan)
ekara_japan_m:mc0013 KSM Mini Volume 5 (Japan) (MC0005-KSM)
ekara_japan_s:sc0012 SAI (series 3) Volume 3 (Japan) (SC0012-SAI)
ekara_japan_s:sc0004 SAI (series 1) Volume 1 (Japan) (SC0004-SAI)
ekara_japan_g:gc0002 BHT Volume 1 (Japan) (GC0002-BHT)
ekara_japan_g:gc0003 BAT Volume 2 (Japan) (GC0003-BAT)
ekara_japan_g:gc0004 BHT Volume 2 (Japan) (GC0004-BHT)
ekara_japan_p:pc0004 BHT Volume 7 (Japan) (PC0004-BHT)
* (nw)
* notes (nw)
* (nw)
* this register seems to be r/w (nw)
* fix crash in popira when pausing (requires register readback)
* save state stuff (nw)
* give excite fishing some inputs while I'm making misc minor changes (nw)
* also promote the Nostalgia games, and Card Night, as they have simple digital inputs and seem to work
* (nw)
* copy+paste modernization
* 2 more dumps (nw)
* doesn't seem to have an seeprom (nw)
* preliminary taikodp controls (nw)
* P4 uses SEEPROM (nw)
* rejig some bases (nw)
-sound/discrete, okim6295: Removed MCFG macros. [Ryan Holtz]
-norautp, osi, audio/mario: Removed MACHINE_CONFIG macros. [Ryan Holtz]
-vsmile: Split into its own driver from vii.cpp. [Ryan Holtz]
-vii: Fixed broken controller inputs. [Ryan Holtz]
-konamim2: Massive update. Most games work, but are still marked non-working due to rare MAME crashes in the PPC DRC. [Phil Bennett, Ryan Holtz]
Used in the high end HP9000/300 machines. Provides a resolution
of 1280x1024 @ 8bpp. It also provides two overlay planes and one
phantom plane. Each plane contains two window movers that are used
for copying characters and tiles on the screen. It also has a RUG
for line/vector drawing. The current state implements everything
that is required to have a working HP Visual user environment in
MAME.
Working:
- window mover
- pixel replacement rules
- window replacement rules
- f0 tripple replacement rule (copy src or keep destination depending on pattern register)
- VRAM bit access mode
- solid line drawing
Not implemented yet:
- drawing circles
- linetype vector/circles
- rectangles
- filling areas
- tripple replacement rules other than f0
-mips3.cpp: Various changes: [Ryan Holtz]
* Added an #ifdef to display DPRINTF calls from the SGI O2 PROM.
* Switched R4000BE/LE, R4400BE, R4600BE, and R5000BE to 64-bit data bus.
* Fixed a bug that caused a crash with 64-bit data bus and the DRC.
-indy_indigo2.cpp: Moved a number of devices into HPC3. [Ryan Holtz]
-hpc3.cpp: Fixed an oversight with IRQs. [Ryan Holtz]
-nscsi_cd.cpp: Added various new-SCSI CD-ROM devices which support 512-byte blocks by default. [Ryan Holtz]
-sgikbd.cpp: Added a rudimentary HLE SGI Indigo keyboard device. Still needs keys to be mapped. [Ryan Holtz]
-indigo.cpp: Various changes: [Ryan Holtz]
* Expanded logging.
* Enabled PIT8254 timer. Has the wrong clock value; the correct clock causes a hang.
* Improved RAM layout.
* Added stubs for DSP RAM and Entry-level graphics.
Two sample roms are missing, sad. Volume is not taken into account
yet (because the registers are not yet understood), pan is though.
Don't even think about reverb or effects :-)
Current code plays a scale in a loop. Comment the timer alloc in
machine_reset to kill that.
Demo song (missing lots of sounds, because roms): U then > until demo
then ENTER ENTER.
-change order of include files at top of i386.cpp
-move some routines between i386.cpp and i386priv.h
-move part of x87ops.hxx into new file x87priv.h
.
Now you only have to rename the hxx files to cpp and add the following
at the top of each one
.
#include "emu.h"
#include "i386.h"
#include "i386priv.h"
#include "x87priv.h"
#include "cycles.h"
#include "debugger.h"
#include "debug/debugcpu.h"
#undef i386
* [R9751] (Squashed) Early work on SMIOC emulation
commit 9b587be762abfd576e92792c612cd205c570924d
Author: Stephen Stair <sgstair@akkit.org>
Date: Tue Apr 10 19:41:55 2018 -0700
Connected SMIOC DMA to 68k
* SMIOC now reading bytes for serial from the 68k memory space successfully.
commit 0f801a05a3fa5b78768a1a2bcb9981466e8f2b0e
Author: Stephen Stair <sgstair@akkit.org>
Date: Tue Mar 27 18:31:32 2018 -0700
68k now running in lockstep with SMIOC for serial
* 68k now uses actual SMIOC as source of SMIOC status, so it waits for the SMIOC to complete commands before continuing.
* SMIOC DMA controllers now being asked to move bytes around
* "write character" (4100) commands to SMIOC are now completing and resulting in correct status being written and sent back to the 68k
* Every now and then the SMIOC stalls for a bit, it seems to be due to spending some time trying to communicate with the 8051 CPU (used to communicate with another cpu on the serial breakout box) that is not currently present in the emulated device.
Next Steps:
* We're going to move the terminal from the r9751 into the SMIOC, and hook it up to the DMA controllers as a hacky temporary solution.
* We need to emulate the 5xxxx memory range in SMIOC to proxy data to/from the 68k memory
* Then we'll start work on emulating the octal uart properly and hooking it up to RS232 channels.
commit ca91614fca3f43d87755d0c3439521276d7bfafb
Author: Stephen Stair <sgstair@akkit.org>
Date: Wed Mar 14 19:52:04 2018 -0700
Tinkering to get SMIOC further along
1) Enable 188 cpu to advance DMA immediatley if DRQ is held high when source synchronous DMA is started (It's not clear whether the DMA actually works this way yet)
2) Retrigger the DMA DRQ when a memory access is made to the DMA window (future work needed to proxy the reads/writes to the 68k's main memory) This is needed to support multibyte DMA reads/writes to the 68k window.
3) Reverse the bytes in the status register (based on current incomplete understanding of how this is encoded)
4) Connect the status register back to the r9751 on SMIOC status read
Current state: SMIOC's main board DMA state machine now completes the DMA transfer from the main board (With incorrect data), but we are still getting stuck.
Next steps: SMIOC is now hanging waiting on DMA to UART to complete, we need to implement some emulation of the UART and its connections to the surrounding 16 dma channels in order to make progress.
commit 62c1455c97a53ed970622e08cb03a225625914fd
Author: Stephen Stair <sgstair@akkit.org>
Date: Sun Mar 4 20:13:32 2018 -0800
Progress on emulating SMIOC
commit daee8498c5840417aee3ed9def0acfba5476335a
Author: Stephen Stair <sgstair@akkit.org>
Date: Sun Feb 25 20:02:32 2018 -0800
Working on bringing up SMIOC
Trying to get emulated SMIOC in lockstep with the main 68k.
commit 5a929fde90307040a0544682888f2f21a914b900
Author: Stephen Stair <sgstair@akkit.org>
Date: Wed Feb 21 20:06:27 2018 -0800
re-enable SMIOC, Logging improvements, first steps towards emulating on-board hardware.
commit f0c7a1665a18c99df5527ae45994f39f95223814
Author: Stephen Stair <sgstair@akkit.org>
Date: Sun Feb 11 16:26:31 2018 -0800
Emulation fix - Terminal now responds to input
commit ecff4035f3fdaa0329df46f99ccd516aa23ec8af
Author: Stephen Stair <sgstair@akkit.org>
Date: Tue Feb 6 19:00:35 2018 -0800
Hacky emulation of SMIOC
now successfully receiving serial characters!
commit 376bca90dff311d24e1f5014d8d6f0dc297bf671
Author: Stephen Stair <sgstair@akkit.org>
Date: Sun Jan 28 18:31:38 2018 -0800
Experimenting with SMIOC emulation
* Partial fixes for line state issues with persistent line values
When the AM9517 DMA controller mode is updated to change the polarity of DACK/DREQ, it doesn't update the DACK line values / request values (respectively).
This fixes this issue for one of the emulated devices in the file, but the other device has the same problem.
* Add skeleton of SCC2698B UART device
* Early progress on emulating SCC2698B Octal UART
Core structure for IO lines and writing registers is in place.
* Update address maps to new format.
* SCC2698b: Add tx/rx, baud rate generation
* Emulation improvements for scc2698b device
* MPP output pins emulated
* Improved logging for baud rate changes
* Channel configuration emulated
* Support for TX/RX Enable
* Started integrating new features into SMIOC
* Minor progress on the path to enabling new UART for SMIOC
* Resolved code issues related to upstream changes
* Working around an apparent problem with callbacks on sub-device devices
* Terminal added for serial port attached to SCC2698B UART.
* Things compile and seem to work.
* SMIOC: Serial is now outputting correctly through emulated SMIOC
Some glitches to work out, but this is nearly ready.
* AM9517a should not forget about input line status on master reset.
* Disable tracing
* SMIOC: Improving diagnostics and making some progress on the emulation
* Revised tracing in SMIOC and SCC2698B
* Improved tracing approach in r9751
* Minor progress towards working SMIOC emulation.
* [R9751] Update drivers to new code patterns after rebase
Rebased on latest mame, Fixed a few issues and updated the callback code patterns based on recent changes in devcb
* [R9751] Improve logging, fix interrupt race
Serial no longer drops output characters
* [R9751] Working on SMIOC emulation
Improved SMIOC emulation accuracy, Made some progress in getting through the disktool initialization sequence, but we are still hitting a problem - It looks like disktool should be resetting the SMIOC board when it starts, but the mechanism for this has not been found.
* [R9751] Improve tracing for system board registers
* [R9751] Improve SMIOC emulation
Still having some trouble with SMIOC but this seems to be an improvement.
SMIOC is now waiting for a status to be read before applying a new status, and mandatory parameter read logic is in place.
* [R9751] Incremental emulation improvements
the SMIOC failure was understood and fixed, and a new approach to getting the hardware to bootstrap correctly was implemented - Still having some problems with it though.
* [R9751] Fixed emulation issues
* Disktool now boots to the console
* UART receive only partly working, I don't think it's fully connected yet.
* [R9751] Further progress on SMIOC emulation
* Figured out the missing command parameter interface to the SMIOC board
* Still blocked because the SMIOC interface to the breakout board through an onboard 8051 is not emulated and the disktool software depends on properties coming from it.
* [R9751] Terminal is fully working for disktool
* Improved the emulation of the 80188 to 451 connection in order to reliably set a status bit disktool depends on.
* [R9751] Fix build after rebase
* [R9751] Cleanup, tracing improvements
* Remove second emulated terminal - SMIOC is now stable enough to run the terminal.
* Remove older and unnecessary emulation/tracing code
* r9751: Fix compile error and modify copyright holders
Zilog Z8038 FIO (FIFO Input/Output Interface Unit). Used to drive the parallel/printer port on the MIPS Rx2030. Passes basic diagnostic tests, but further work depends on progress in the mips.cpp driver.
On HP9000/300, these modules where always a logical unit connected to
the DIO bus. On some systems this was even a seperate DIO module. Lets
represent this in software. It also cleans up hp9k_3xx.cpp.
A skeleton for the Microsoft Jazz architecture, which was implemented in the MIPS Magnum 4000, Olivetti M700-10 and was the base/origin of several other MIPS ARC systems.
* added skeleton Inmos G300/G332/G364 device
* added skeleton NatSemi DP83932C SONIC device
* added skeleton MCT-ADR device
* Separate Microsoft 2-button mouse and Logitech 3-button Microsoft-compatible mouse
* Add Microsoft wheel mouse
* Make Mouse Systems mouse behave more realistically
* Add Mouse Systems "rotatable" mouse
* Simplify code and eliminate timers
(nw) X/Y translation and buttons works for all devices. The wheel on
the wheel mouse seems to be transmitting the right data, and CuteMouse
detects the wheel as being present, but no software seems to support it
properly. Software supporting the Mouse Systems "rotatable" mouse is
very rare - typically people just set the DIP switches on their M-1 for
"non-rotatable" mode. A standard mouse driver will see the "rotatable"
mouse moving two mickeys for each count, and move eratically on
rotation. The "rotable" mouse is poorly tested due to lack of software.
(nw) MAME doesn't have a proper input type for a mouse wheel, and it
doesn't seem to be possible to map the host mouse wheel to an axis when
configuring inputs. The default mapping ends up assigining the wheel or
rotation to one of the translation axes, which is very unhelpful.
Also add notes to Sun keyboard emulation.
There's a hack to make the 1200 Baud mouse actually run at 9600 Baud.
This is necessary because the SCC is incorrectly expecting 9600 Baud
rather than 1200 Baud. I don't have time to fix the SCC, so I'd
appreciate it if someone else would.
There's no way it should be expecting 9600 Baud on the mouse port.
Solaris 2.3 and later support 1200 Baud and 4800 Baud, and earlier
versions support 1200 Baud only. No version of Solaris works with a
9600 Baud mouse.
The workaround allows the mouse to be used in SunView on sun4_60 - I
haven't tested any other drivers.
* Add huc6230 Emulation
huc6272.cpp : Add ADPCM transfer, Add save states
PC-FXGA for PC-9801 C Bus is released in December 1995 in Japan, Correct metadata
* huc6272.cpp : Fix ADPCM address
* huc6230.cpp : Simpler interpolate
* huc6230.cpp : Fix clamp
huc6272.cpp : Fix ADPCM nibble
* huc6272.cpp : Fix data type
* Revert pcfxga year; PC-FXGA for PC9801 C-bus is not dumped?
* Implement Mitsumi Amiga 500, 600, and 2000/3000/4000/CDTV keyboards
* Add unlabeled keys to UK layout
* Restrict available keyboards depending on system type
* Note that C-A-A reset is now broken on "big box" Amigas as MAME doesn't implement it properly, and the hack providing a fake dedicated reset line has been removed
6502 MCU: fix execute loop
6500/1: implement as device with onboard peripherals
Fix some bogus comments
(nw) New keyboard only has U.S./Canada and UK variants for now. This keyboard doesn't
drive a dedicated reset line, instead using some sequence on the clock line detected by
the host chipset. MAME doesn't support this, so keyboard reset won't work. Also started
documenting the character labels on the keypad NumLock/ScrLock keys for language variants
but still need more pictures.
* taptun: add support for Windows
Looking for feedback only at this point, because it's the first time I've attempted any OSD stuff - be gentle.
This extends the existing taptun OSD module to support Windows through the TAP-Windows6 driver (https://github.com/OpenVPN/tap-windows6).
* TAP-Windows6 is GPLv2, however only the header file is required in MAME, and the driver itself is entirely optional.
* I've tried to minimise the size of the diff, rather than completely separate the Windows/non-Windows implementations - not sure which is preferable in this case.
* The license file has Mac(?) line-endings - unsure if they should be normalized or used verbatim.
* Uncertain about the non-Windows case (or the Windows SDL case) - existing code uses __linux__, but I'm not clear on how that works with OSX, for example?
* I can't claim this actually "works" yet, because I don't know enough to configure the tap end of it properly to get networking doing something useful, but I will get there and correct anything necessary in a subsequent real PR.
* minor fixes/improvements (nw)
* Use Unicode Windows APIs, and UTF-8 for MAME
* Deal with unterminated registry string values
* Cancel any pending I/O in destructor
* Eliminates the need for the horizontal/vertical/LCD/SVG layout files
* Screens can now have orientation and physical aspect ratio specified
* RASTER/VECTOR defaults to 4:3, LCD/SVG defaults to square pixels at config time
* System orientation is applied on top of screen orientation
Automatically generated single-screen views and orientation flags in XML
output now work correctly for systems with multiple screens in different
geometries/orientations, e.g. housemnq, rocnms, stepstag, or netmerc.
The "core rotation options" only interact with system orientation.
Allowing multi-screen systems to work well with one monitor per emulated
screen is a complex topic. System orientation also affects the GFX
viewer while screen orientation doesn't. The orientation displayed in
the system selection menu is from the system orientation.
Let me know if I've broken any systems or use cases.
Also, add save state support for std::array/C array nested to any depth.
* rewrote most of the execution for my tlcs870 core
* no longer the case (nw)
* note updates (nw)
* address concerns, const qualify more things where possible (nw)
* more const (nw)
* oops (nw)
* consistency (nw)
* hp9k_3xx: fix timer connection for /320 models
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* hp9k_3xx: add HP9122C floppy
Remove HP9895 from the default configuration. 3.5" where
standard on /300 and there's almost no software on it available.
If a user really needs 8" floppy drives on /300, he can do that via
commandline.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* add Intel i8291a GPIB Talker/Listener
Required for the HP 9122C floppy, and used in many other devices.
Basic functionality was implemented to make the HP 9122C work, a few
things are still missing and will be added later. Most of the missing
things where simply not used in the HP9122C so i cannot test them.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* Add HP 9122C floppy drive
These drives where common on HP9000/300 workstations. With the current
implementation TD0's from hpmuseum can be used to boot, and initializing,
reading and writing discs in HP basic works. Tested both high and double
density media. Supported Media formats are TD0 and MFI.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* Remove vram_rw and ctrl_rw wrapper functions
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* topcat: replace hardcoded display width by m_fb_width
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* topcat: prepare topcat for multi plane operation
framebuffer vram is only 1 bit wide.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* 98544: set single topcat plane
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* add nereid mapper used on HP98543/98545 graphic cards
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* prepare for multi-topcat operation
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* add HP 98543 4 plane graphics card
* hp9k_3xx: add hp98543 card
* topcat,nerid: disable VERBOSE
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* hp98543: use required_device_array
* 98543: use required_region_ptr
* 98544: use required_region_ptr
* topcat: add save state support
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* nereid: add save state support
* hp98544,hp98543,topcat: use shared memory space
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* nereid: remove redundant variable
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* topcat, nereid: remove trailing underscore from include guard
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* topcat,hp98543: code style fixes proposed in PR
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* softfloat3: do we like this better? (nw)
* softfloat3: it gets the hose again (nw)
* softfloat3: sonofa (nw)
* interpro: wip checkpoint (nw)
* added 6x00 models
* added EDGE graphics skeleton
* split bus/cards into two types
* various fixes/changes
* proposal: move z80daisy* to devices/machine
Seems to me this is a machine, not a CPU? Main reason was to stop the Z80 CPU from being dragged into systems that don't have one just because they use a Z80 family peripheral.
* missed this one (nw)
* missed a spot (nw)
* softfloat3: fix msvc build (nw)
Is this how we do these things? I assume we don't touch the library code itself, and have to "fix" any problems via this header instead?
* softfloat3: do we like this better? (nw)
* softfloat3: it gets the hose again (nw)
* softfloat3: sonofa (nw)
This is a pre-usage import so everyone can get things in line for various compilers. GCC/Clang should be OK on most targets as-is;
MSVC may need to edit 3rdparty/softfloat3/build/MAME/build.h to conform. Please report failure/success with various compilers.
* add topcat template
HP topcat was an ASIC used on HP900/300 graphics cards.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* hook up topcat asic to HP98544
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* topcat: add basic configuration macros for fb planes, height and width
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* hp98544: move logic to topcat video driver
Preparation to support multi plane graphic cards
like the HP98543/98545/98547.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* xtal: add 35.904MHz XTAL
* interpro: slotify mouse (nw)
Needed to make the mouse a slot device to enable it to be connected to graphics boards under development.
* add validity check (nw)
* bt45x: new devices
Basic implementation of various Brooktree RAMDAC devices. Two of these (bt457, bt458) are used by InterPro graphics boards currently under development, the others are unused/untested at this point.
* bt45x: tweak descriptions (nw)
* start looking at the extra opcodes in the SSD 2000 type XaviX chip (seems some undocumented 6502 opcodes are replaced with more custom ones)
* (nw)
* the xavix memory mapping gets stranger with each piece of new evidence (nw)
- Use device_resolve_objects to resolve callbacks in output_latch_device (nw)
Note that this renaming is not just for human convenience; genie seems to get confused by modifications to a header called latch.h and decides to recompile everything involving gen_latch.h as well.
The 98603A and 98603B cards have different base addresses and sizes
for the rom region. Split up the cards so that we can boot HP BASIC 4
and HP BASIC 5.1.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* Move around the debugger hooks to get a small but measurable performance increase
* Remove emucore from external tools
* Improve performance of DSP16 interpreter a little by generating six variants of execution loop
* remote488: work started
* remote488: fixed a crash when using socketed bitbangers on Linux machines
* remote488: added ieee-488 remotizer device
* remote488: added remotizer devices to ieee-488 buses of HP9845 & HP85
* remote488: added missing emu.h inclusion
* Revert "remote488: fixed a crash when using socketed bitbangers on Linux machines"
This reverts commit edfeb1768e.
* remote488: nudge..
* remote488: no longer use locale-dependent functions, added commas and
semicolons as msg separators, improved use of util::string_format
* Fixed building using system utf8proc
* Fixed building using system portaudio
* Allow using system-wide asio headers (1.11.0 or higher required).
* Allow using system-wide glm headers
* Allow using system-wide rapidjson headers
* create derived 6502 type for XaviX because it has at least one custom 4-byte opcode that doesn't fit any other type.
treating that opcode as NOP for now.
have a feeling it might be something to do with the other integrated hardware, might be 'execute co-processor code chain at this address' or something similar
It isn't a standard JSL (Jump Subroutine Long) like the SNES cpu opcode in the same place as this, it seems to point at some code-like structures tho)
could also be a secondary operation mode with different encoding like ARM's Thumb mode tho I guess.
We currently only have a single XaviX based dump (taitons1) but there are more on the way. I'm going to see if the code flow makes any sense at all with these missing, or if any of it gives a clue as to what they should actually do.
* xavix - let's call these callf and retf then
after further investigation these are some kind of extra 'long jump' subroutine / task handlers, the 0x80 also being a custom opcode was throwing me off trying to identify them before.
looks like they might have been hacking 65816 features into the regular 6502 core?
* prepare for extra address bits (nw)
* better program flow (nw)
- P.R.E.S. Advanced Plus 3/4
- Advanced Quarter Meg Ram
- Cumana Floppy Disk System
- Sound Expansion
- Sound Expansion v3
- Stop Press 64
- Solidisk EFS
New working software list additions
-----------------------------------
electron_cart: Solidisk EFS 2.1E
New NOT_WORKING software list additions
---------------------------------------
electron_cart: Stop Press 64
Software list items promoted to working
---------------------------------------
electron_cart: Advanced Plus 3, Advanced Quarter Meg RAM, Slogger Electron Disk System, Sound Expansion v3
* fix/tidy tvboy driver (nw)
* missed file (nw)
* framework for adding 'gamebooster' (need to figure out how it actually works / maps tho) (nw)
(code based on zx spectrum expansion port code)
* (nw)
* lost a line (nw)
* allow it to run (nw)
* continued work (nw)
* mame64 psj -parallel gamebooster -cart tetris now works
* rm outdated (nw)
* remove unneeded code (nw)
* limit accesses, log unexpected ones, might have custom banking (nw)
* write bytes in an order that keeps the gb code happier , sml boots (nw)
Revert "Removal of voltage_regulator_device (nw)"
This reverts commit 1af133752a.
Revert "New way to provide DAC reference inputs (nw)"
This reverts commit 1c6a7ab40c.
please people, remember to keep source UTF-8 and if you're committing on behalf of others, clean up indents to meet MAME conventions
anyone can run srcclean over a submission and see what will get hit
An implementation of the National Semiconductor DP8510 BITBLT Processing Unit. This is used on the InterPro GT family graphics boards, and this implementation seems to be correct enough to enable me to progress there, hence the PR. While I'd love to have another system to test against, I'm not aware of any other systems that ever used this device other than some NatSemi reference designs, which are not (yet) in MAME.
Disassemblers are now independant classes. Not only the code is
cleaner, but unidasm has access to all the cpu cores again. The
interface to the disassembly method has changed from byte buffers to
objects that give a result to read methods. This also adds support
for lfsr and/or paged PCs.
Implementation of 28F010 and family flash memory devices. These are not compatible with the JEDEC-standard flash command protocol implemented in intelfsh.
* Don't use device_serial_interface for transmit - it can't support sync modes, on-the-fly register updates, and other weirdness.
* Better modelling of 1-deep transmit queue.
* Better RTS/CTS behaviour.
* Completely overhauled interrupt logic - vectors should be correct for most async modes.
* Implemented different auto-reset receive errors in MPSC vs SIO.
* Implemented SDLC transmission including bit stuffing, transmit CRC, abort, and underrun/end-of-message behaviour.
Added an SDLC consumer device that logs SNA frame headers and data.
The analogue joystick is now emulated. Also fixed a few minor issues
with the memory map.
This also adds a generic Z80 dasisy chain device, for use in drivers
with non-Z80 peripherals.
Use "mame einstein -pipe tk02" to attach the 80 column device.
* Removed no longer needed einstei2 driver
* Added cursor rendering to the 80 column device
* Added support for the alternate character set (use dip switch to
change)
* Cleaned up and added save state support to the 80 column device
* added basic support for the system bus variously referred to as SR, SR bus, SRX and CBUS
* added an initial GT graphics card implementation, only supports the video ram and ramdac for now, but sufficient to boot the diagnostic monitor in graphics mode
* added a high-level emulation of the InterPro keyboard
protection handled etc. written from scratch based on notes from Kevtris and Peter
banking in the slot system seems somewhat archaic compared to proper modern banking, but this is how all other drivers I saw using slot roms did it.
* Emulate LC7535 based volume control for Dragon Gun board based games
* Add DSW3 and DIP locations to Captain Avenger
* Reorganize driver and start cleaning it up (in progress)
Specifically, this creates a call osd_get_command_line() that returns UTF-8 command line arguments as std::vector<std::string>. On non-Windows platforms, this does nothing more than build the vector. On Windows, this invokes GetCommandLineW() and CommandLineToArgvW(). This also attempts to unwind usage of wmain()/_tmain() on Windows, which is not standard.
Related to this, this fixes a bug in Imgtool; specifically, non-7 bit ASCII was not being handled correctly in Windows.
This is really an admission that the way that Windows handles Unicode and command line arguments sucks, and it is my belief that having a wmain() or _tmain() declaration specific for Windows is a worse solution. C'est la vie.
I'm very open to the idea that src/osd/osdcore.[cpp|h] is not the best place to do this. Let me know if I should move it.
* hp85: added support for optional ROM cartridges. Started optional ROM
sw list (not finished).
* hp85: refactored mapping of opt. ROMs according to cuavas' comments
* initial skelethon: ControlID X628 fingerprint reader
* first draft of an implementation of the NT7534 device (LCD controller)
* fix emulation of ControlID x628 + NT7534 LCD controller
* cidx628: fix LCD color palette on Control ID x628 driver
* Adding a header with details of the hardware. This is the first MAME driver with an LCD controlled by a NT7534 chip, so I wrote an initial implementation of that new device.
These humble 16-pin logic devices were commonly used in 8-bit arcade games to control coin counters/lockouts, IRQ flipflops, graphics banking, slave CPU reset lines, discrete audio triggers, screen flipping, serial EEPROMs and much else. Over 100 drivers and a few bus devices have been updated to use the new implementation, and a great deal of research has gone into documenting the physical location of these devices on actual PCBs in the source. Write handlers have been provided for both orthodox and somewhat less conventional memory mappings.
Incidental to this update, coin counters and/or lockouts have been added to Atari System 1 games, Basketball, Gauntlet, Gyruss, Hana Yayoi, Hole Land, Jr. Pac-Man, Mahjong Sisters, Pooyan, Roc'n Rope, Squash, Thunder Hoop, Time Limit, Time Pilot '84 and many others. This also cleans up coin counter behavior in Sauro and Rally Bike.
(nw) The purpose of committing this change, which has been several months in the making, early in the 0.189GIT cycle will be to allow time for fixing potential regressions; I've fixed a number of drivers that lost sound from this for various reasons (hnayayoi.cpp having missing or garbage ADPCM was particularly painful, since the three games in that driver all work slightly differently), but I can't test all affected drivers exhaustively. @Tafoid, don't bother running automated screen capture comparison tests on this, as many drivers are now expected to have the screen flipped for the first few seconds after reset.
* Fix save/load states in Emscripten build
* Simplified Emscripten integration points
* Moved standalone JS functions to be static member functions of running_machine
* Improved Emscripten main loop
* Use convenience functions for cleaner code
As an added bonus, this now allows for proper shutdown of the running machine when running in the Emscripten environment - previously, attempts to exit the program were just being ignored.
What works:
* HP85A machine with 16K of RAM
* Capricorn CPU works
* Keyboard works (with minor issues)
* CRT text / graphics modes work (correct speed is not emulated yet so service ROM complaints)
* BASIC is usable
What is missing (and I'll have hopefully working soon):
* HW timers
* Beeper
* Integral printer
* DC100 cassette drive
* Extension ROMs
* I/O modules (especially the HPIB interface so that we can hook up floppy drives)
* Other models in the family (e.g. HP86)
create a uPD78C11 derived CPU type for this purpose, with internal ROM map
use internal ROM map for other uPD78C10 chips as it's always present.
add missing NO_DUMP definitions to various games using C-Chips with correct size etc.
pump megablast through the device code as really all it ever does is bank the c-chip window and test the RAM.
* Implemented front panel mode switches/LEDs and reset switch
* Added skeleton bus for "universal" slots and connected control lines
(nw) Default keyboard mapping is annoying because left shift, Z and X
are used both for typing into the TTY and switching program bank. You're
better off changing the mapping to make it less annoying or using a
socket and talking to it with telnet.
* Renamed to MCS-40.
* Emulated 8-clock instruction cycle, interruptible at any point.
* Converted TEST input to an input line.
* Added SYNC and CM output lines.
* Added support for 4040 CY output, logical operations, extended registers, ROM banking and disassembly.
* Made I/O space mapping more flexible to support the variety of peripherals available.
* Notable missing features are 4040 interrupt and halt, and "program memory" space.
* This turns the current state save feature to a menu; one can still press 0-9, but you can also browse a menu when loading and saving state
* Fixed some issues requested by Vas Crabb
* Updated state menu to support arbitrary character slots
* WIP, transitioned 'entry_char' to std::string
Still need to address Joystick and FR keyboard concerns
* Reimplemented state save support with joystick buttons
* Changed the state menu to be "code driven" rather than "character driven"
When the menu is displayed, it will look at the filenames, and translate them to a visual representation as per the user's locale
* Vas feedback
* This turns the current state save feature to a menu; one can still press 0-9, but you can also browse a menu when loading and saving state
* Fixed some issues requested by Vas Crabb
* Updated state menu to support arbitrary character slots
sound board, completing the tromba circuit
(nw) I'm not sure whether the model works properly or not, but in the
circuit where it's used, I don't think it can work properly with the
current TTL output model. A capacitor is charged by the Q output of a
74LS74 flipflop (U3A) until the voltage passes the Schmitt trigger's
threshold, causing it to reset the flipflop. However, the positive
trigger voltage of the Schmitt trigger is 1.6V, but our TTL output model
has a high output voltage of 1.0V (see nl_base.cpp:89). I realise the
simplified model of TTL logic with high impedance inputs and outputs
behaving as though thery're loaded is convenient and fast to simulate,
but it's not detailed enough for applications like this where
7400-series chips are used in analog circuitry. This is what held me up
last time I tried adding a netlist for this sound board.
- OPENMP refactored. All OPENMP operations are now templatized in pomp.h
- We don't need thread-safe priority queue. Event code updating analog
outputs now runs outside the parallel code.
(nw)
* move rarely-used output and pty interfaces out of emu.h
* consolidate and de-duplicate forward declarations, also remove some obsolete ones
* clean up more #include guard macros
* scope down a few more things
(nw) Everyone, please keep forward declarations for src/emu in src/emu/emufwd.h -
this will make it far easier to keep them in sync with declarations than having
them scattered through all the other files.
The core changes are:
* Short name, full name and source file are no longer members of device_t, they are part of the device type
* MACHINE_COFIG_START no longer needs a driver class
* MACHINE_CONFIG_DERIVED_CLASS is no longer necessary
* Specify the state class you want in the GAME/COMP/CONS line
* The compiler will work out the base class where the driver init member is declared
* There is one static device type object per driver rather than one per machine configuration
Use DECLARE_DEVICE_TYPE or DECLARE_DEVICE_TYPE_NS to declare device type.
* DECLARE_DEVICE_TYPE forward-declares teh device type and class, and declares extern object finders.
* DECLARE_DEVICE_TYPE_NS is for devices classes in namespaces - it doesn't forward-declare the device type.
Use DEFINE_DEVICE_TYPE or DEFINE_DEVICE_TYPE_NS to define device types.
* These macros declare storage for the static data, and instantiate the device type and device finder templates.
The rest of the changes are mostly just moving stuff out of headers that shouldn't be there, renaming stuff for consistency, and scoping stuff down where appropriate.
Things I've actually messed with substantially:
* More descriptive names for a lot of devices
* Untangled the fantasy sound from the driver state, which necessitates breaking up sound/flip writes
* Changed DECO BSMT2000 ready callback into a device delegate
* Untangled Microprose 3D noise from driver state
* Used object finders for CoCo multipak, KC85 D002, and Irem sound subdevices
* Started to get TI-99 stuff out of the TI-990 directory and arrange bus devices properly
* Started to break out common parts of Samsung ARM SoC devices
* Turned some of FM, SID, SCSP DSP, EPIC12 and Voodoo cores into something resmbling C++
* Tried to make Z180 table allocation/setup a bit safer
* Converted generic keyboard/terminal to not use WRITE8 - space/offset aren't relevant
* Dynamically allocate generic terminal buffer so derived devices (e.g. teleprinter) can specify size
* Imporved encapsulation of Z80DART channels
* Refactored the SPC7110 bit table generator loop to make it more readable
* Added wrappers for SNES PPU operations so members can be made protected
* Factored out some boilerplate for YM chips with PSG
* toaplan2 gfx
* stic/intv resolution
* Video System video
* Out Run/Y-board sprite alignment
* GIC video hookup
* Amstrad CPC ROM box members
* IQ151 ROM cart region
* MSX cart IRQ callback resolution time
* SMS passthrough control devices starting subslots
I've smoke-tested several drivers, but I've probably missed something. Things I've missed will likely blow up spectacularly with failure to bind errors and the like. Let me know if there's more subtle breakage (could have happened in FM or Voodoo).
And can everyone please, please try to keep stuff clean. In particular, please stop polluting the global namespace. Keep things out of headers that don't need to be there, and use things that can be scoped down rather than macros.
It feels like an uphill battle trying to get this stuff under control while more of it's added.
- Create device_palette_interface, which takes over most functionality from palette_device except for the initialization/decoding routines and RAM interface.
- Update screen_device and device_gfx_interface to use a device_palette_interface object rather than a palette_device. This necessitates slight alterations to a few drivers and devices.
- Modify v9938 and v9958 to use the new device_palette_interface rather than a subdevice. This entails breaking a cyclic dependency between device_video_interface and screen_device for this case.
nes: Fix debug output when reading iNES headers. (nw)
nes/ppu2c0x: Improved PAL clone timings. (nw)
nes/n2a03: Refactored clock definitions [includes other drivers using the
N2A03] (nw)
nes: Improved refresh rates and timings to reflect nesdev (nw)
nes: Softlist improvements and corrections [koko, mkgoogoo and others] (nw)
nes: Verified koko in the softlist as a good dump (nw)
nes: Softlist additions [subor5, subor6, subor10, subor11, subor13, doolybld]
(nw)
New not working machines added: Subor SB-486, M82 Display Unit (PAL) (nw)
nes: Marked drpcjr as NOT WORKING due to missing hardware. (nw)
New working machines added: Micro Genius IQ-501, Micro Genius IQ-502, Dendy Classic 2 (nw)
nes: marked dendy as a clone of iq501 (nw)
* tee allows two peripherals to be connected in parallel
* glinkhle is an RS232 (9600 8N1) adaptor
* bitsock sends raw assert/release line signals to/from a bitbanger device
* monospkr is a speaker connected between tip/ring in parallel and sleeve
* stereospkr is two speakers: left across tip and sleeve, right across ring and sleeve
Use glinkhle to make emulated calculators talk with cooked sockets, e.g.
mame ti82 -linkport glinkhle -linkport:glinkhle:rs232 null_modem -bitb socket.127.0.0.1:2345
Use bitsock to make emulated calculators talk with cooked sockets, e.g.
mame ti82 -linkport bitsock -bitb socket.127.0.0.1:2345
You can use tee to do stuff like listen to data activity for debugging purposes, e.g.
mame ti82 -linkport tee -linkport:tee:a stereospkr -linkport:tee:b glinkhle -linkport:tee:b:glinkhle:rs232 null_modem -bitb socket.127.0.0.1:2345
* Make device_creator a variable template and get rid of the ampersands
* Remove screen.h and speaker.h from emu.h and add where necessary
* Centralise instantiations of screen and speaker finder templates
* Add/standardise #include guards in many hearers
* Remove many redundant #includes
* Order #includesr to help catch headers that can't be #included alone
(nw) This changes #include order to be prefix, unit header if applicable
then other stuff roughly in order from most dependent to least dependent
library. This helps catch headers that don't #include things that they
use.
- Moved 9312 and 74279 to ttl macro library.
- Renamed TTL_9312_* to DM9312. This is more appropriate.
- Fixed a number of warnings from latest ubuntu clang-5.0.
* Use size_t for sizes and <algorithm> for algorithms
* Fix up some files that were getting linked into multiple libs
* Add missing virtual method to sh2 peripheral class
* Put shortname in driver struct for locality
* Use shared pointers in config LRU cache for safety
Per Vas' request. If the compile fails for you (i'm thinking osx and
windows native debuggers here in particular), add '#include "emu.h"'
as first include of the cpp files that fail.
Due to our use of precompilation and forced inclusion, emu.h must be
included as the very first non-comment thing we do if we want to be
sure msvc compiles are identical to gcc/clang ones. Doing it directly
instead of through an include increases the correctness probability by
a magnitude.
- Created devices for the galaxy games carts (EEPROM + Flash + PIC) and the slot(s)
- Removed code patches and emulated the PIC communication and bank switching
- Converted the blitter to a device (cesblit.cpp)
- moved the Galaxy Games from tmaster.cpp to their own driver (galgames.cpp)
Provided the PIC code for all four StarPak cartridges [Keith M. Kolmos]
New working machines
--------------------
Galaxy Games StarPak 3
[Keith M. Kolmos, Rod_Wod, Sean Sutton, Soren Skou Nielsen, Russell Howard, Francis Ramirez,
Tourniquet, BrianT, coolmod, Smitdogg, The Dumping Union, Luca Elia]
* Put Amiga keyboard implementations in a namespace
* Factor out matrix keys to a common module shared by A500/A1200
* Make new German matrix based on US matrix with Alt-chars hooked up
* Remove outdated comment
* Added m146805 and m68hc05 to unidasm
* Made opcode tables configurable in m6805_base_device, provided tables for HMOS, CMOS and HC families
* Implemented MUL instruction, made unimplemented STOP and WAIT raise fatal error
* Added skeleton MC68HC05C4 with RAM and ROM in correct locations in memory map
Device implementations (all cpp files in netlist/devices) now should
only include nl_base.h.
Netlist implementation sources should only include "net_lib.h".
Refactored netlist.h and netlist.cpp to avoid namespace congestion in
netlist.h.
Fixed VC2015 build. (nw)
* should be #included after other headers and after optionally #defining VERBOSE
* usage samples in z80scc.cpp and m68705.cpp
68705: add lots of logging to help trace issues
- refactored reverse polish notation evaluator into own source files.
- added function parameter to current and voltage sources VS and CS.
You can now use those to e.g. produce a sine wave.
- Changed code to allow devices to optionally be treated as dynamic or
timestepping devices.
[Couriersud]
* Moved 68705 devices into their own file.
* Made P3, P5 and U3 variants and made them load bootstrap ROMs.
* Implemented EPROM control (write is stubbed out with a logerror).
* Implemented differences for open drain I/O ports.
(nw) Base device with peripherals should really derive from the 6805
device directly, not the 68705 devices, as I/O ports are present on mask
devices (e.g. 6805P2). All drivers and devices that were using
M68705_NEW have been changed to M68705P5 - someone who knows the drivers
better should fix them up.
into these files as well. The code uses <cfenv> which is part of c++11
standard. Non-standard glib extensions are currently only used on linux
and (i386 or x86_64). (nw)
in the mizar lib. This is suboptimal, but the code seems to
crossreference across object files and from the bus code into the driver
code.
At least the source now links again. (nw)
- Allow stringing multiple callbacks together recursively. Chained callbacks will be read or written in sequence, and each can be configured with its own type and mask/shift/XOR parameters.
- Chained input callbacks cannot have overlapping masks (there's no such thing as a free multiplex). Chained output callbacks have no such restriction.
- Remove the constant parameter for the LOGGER callback type: it makes no sense for output, was always zero in existing usage, and is now unnecessary with callback chaining.
- Change LOGGER behavior for writes to log the user-defined message only if the output as masked is nonzero. With callback chaining, this can be used to monitor when individual bits become active.
- Constant read callbacks can no longer have MCFG_DEVCB_XOR or MCFG_DEVCB_INVERT specified (makes no sense in this context).
- Add a MEMBANK callback type to allow output bits to be used for bank-switching.
- Add ASSERTLINE and CLEARLINE callback types that raise or lower an interrupt line if the selected bit of the written value is active. These are intended for where periodic or ready-pulse signals from devices are used to trigger IRQs that the CPU program will independently acknowledge.
- Add MCFG_DEVCB_BIT as shorthand for masking and shifting out an individual bit for a callback.
- Removed DEVCB_LINE_DISPATCH_<n>. Where we're going, we don't need line dispatcher devices.
The incompatibility of compilers with regard to post-C90 printf string formats is shockingly bad. There seems to be no easy way to format a 64-bit value and please both gcc and clang, let alone MSVC.
-netlist: Added new devices: [Ryan Holtz]
* Intel 2102A 1Kbit (1024 x 1) Static RAM
* 74365 Hex Bus Driver with 3-State Outputs
* Generic 2- and 3-terminal Tristate device
* Note: Tristate device and 74365 do not actually tristate, they are simply a way of combining multiple outputs + chip enables.
selmenu: use LRU cache so icons don't all need to be reloaded on scroll
uismall.bdf: set default character for missing glyphs
rendfont.cpp:
* encapsulate many BDF and BDC handling details
* make file I/O 64-bit clean, check for allocation errors
* more solid BDF parser with error messages and trace logging
* fix heap smash when building bitmaps for BDF fonts
* extend BDC format to support high planes and default character
* render default character if glyph not found for BDF/BDC
- Uses the standard 6840 PTM core for sound generation
- New MM583 Noise Generator device
- New DAC-76 DAC sound
- Use resistor network values for colors
- Use bankdev device for banking
Use standard uint64_t, uint32_t, uint16_t or uint8_t instead of UINT64, UINT32, UINT16 or UINT8
also use standard int64_t, int32_t, int16_t or int8_t instead of INT64, INT32, INT16 or INT8
ataxx: Fixed missing sound channel caused by one dac not being hooked up and one dac being hooked up to two addresses.
bestbest: Fixed high pitch screech caused by incorrect addressing (two dacs weren't hooked up and two were hooked up to two addresses).
cchasm: Fixed static noise generation caused by feeding the same bit to both dacs.
cheekyms: Slightly improved sound by implementing sound triggers as 8 x 1 bit dacs instead of 1 x 8 bit dac.
galeb: Fixed sound by implementing it according to http://www.deltasoft.com.hr/retro/galebemu.htm & implemented enough of LOAD/SAVE to stop it hanging.
hard drivin: (all games in driver) Improved 12 bit controls, although centre still goes out of sync.
mea8000: Converted to a sound device.
megaphx: Fixed noisy samples due to wrong format.
microvsn: Fixed sound pitch caused by incorrect usage of write_signed8().
seicross: Changed to a 4 bit dac as samples are packed nibble.
spaceg: Preliminary sound using space invaders samples.
suna8: Changed to a 4 bit dac as samples are packed nibble.
vcombat: Fixed static during machine gun fire due to incorrect dc offset removal.
vectrex: Fixed noisy samples due to wrong format.
wheelfir: Fixed sound, eeprom & analogue steering wheel and brake pedal.
AJR