Zilog Z8038 FIO (FIFO Input/Output Interface Unit). Used to drive the parallel/printer port on the MIPS Rx2030. Passes basic diagnostic tests, but further work depends on progress in the mips.cpp driver.
A driver for machines made by MIPS Computer Systems, which used MIPS R2000, R3000 and R6000 CPUs and ran RISC/os (a port of UNIX System V Release 3). Initial focus is the RC2030 headless workstation. As of this commit, it gets part-way through its I/O processor diagnostics with output to a serial terminal.
* naming changes (nw)
* move stub audio related functions to their own file (nw)
* addressing notes (nw)
* control sprite mode with sprite reg instead of value set in init (nw)
* refactor a bit (nw)
* sprite DMA connects directly to spriteram, not through the main bus (nw)
* minor changes (nw)
* fix multiplier unit use in rad_madf (nw)
* implement 'text array / memory emulator' (nw)
* some naming (nw)
* code treats this like another palette entry (bg pen maybe)
On HP9000/300, these modules where always a logical unit connected to
the DIO bus. On some systems this was even a seperate DIO module. Lets
represent this in software. It also cleans up hp9k_3xx.cpp.
* hphybrid: major overhaul to add the 09825-67907 variant
* hphybrid: adapted hp64k & hp9845 to revised hphybrid CPUs
* hp9825: first release of HP9825B emulator
* hphybrid: added 09825-67907 to unidasm
* hp9825: improved appearance of blinking cursor
* hphybrid: minor changes
* mwarr.cpp refactoring
* mwarr.cpp refactoring
* stlforce refactor (nw)
* use suggested syntax, unless there's something to actually modify instead of outright replace?
* ok, no need to signal that we're modifying a device at all, just modify it (nw)
* move includes as requested (nw)
* do stuff modern way (nw)
* namco checkpoint (including cam900 submission)
* move code into device (nw)
* start splitting DSP support code into devices (nw)
* fix crash (nw)
* prepare for further splitting (nw)
* move code for C67 based DSP PCB into it's own device (nw)
* survive F3 resets without crashing or breaking the 3D (nw)
* less magic numbers (nw)
* optional -> required
don't use fake bootstrap on older type, suspend CPU instead
* restore CPU yield hack for solvalou (nw)
* (nw)
* give galaxian3 some DSPs (nw)
* address hap's concern with a different workaround since MAME is awkward (nw)
* split namco21 driver into 3 drivers as the different configurations really are entirely different boardsets with similar components, not a real 'system'
emulated entire PCB set for driveyes ( http://www.tvspels-nostalgi.com/Bilder/PCB/Namco/driverseye_cage_inside.jpg ) although how the PCBs communicate is not yet known (C139 maybe, which might also be an MCU)
* remove empty file (nw)
* actually thinking about it, this is cleaner (nw)
* mark cybsledj as World instead, there's nothing about this set other than the CY1 code to indicate that it's a Japanese set, and I don't think the Namco codes represent region, just release order.
* newline (nw)
* newline (nw)
A skeleton for the Microsoft Jazz architecture, which was implemented in the MIPS Magnum 4000, Olivetti M700-10 and was the base/origin of several other MIPS ARC systems.
* added skeleton Inmos G300/G332/G364 device
* added skeleton NatSemi DP83932C SONIC device
* added skeleton MCT-ADR device
* Separate Microsoft 2-button mouse and Logitech 3-button Microsoft-compatible mouse
* Add Microsoft wheel mouse
* Make Mouse Systems mouse behave more realistically
* Add Mouse Systems "rotatable" mouse
* Simplify code and eliminate timers
(nw) X/Y translation and buttons works for all devices. The wheel on
the wheel mouse seems to be transmitting the right data, and CuteMouse
detects the wheel as being present, but no software seems to support it
properly. Software supporting the Mouse Systems "rotatable" mouse is
very rare - typically people just set the DIP switches on their M-1 for
"non-rotatable" mode. A standard mouse driver will see the "rotatable"
mouse moving two mickeys for each count, and move eratically on
rotation. The "rotable" mouse is poorly tested due to lack of software.
(nw) MAME doesn't have a proper input type for a mouse wheel, and it
doesn't seem to be possible to map the host mouse wheel to an axis when
configuring inputs. The default mapping ends up assigining the wheel or
rotation to one of the translation axes, which is very unhelpful.
Also add notes to Sun keyboard emulation.
There's a hack to make the 1200 Baud mouse actually run at 9600 Baud.
This is necessary because the SCC is incorrectly expecting 9600 Baud
rather than 1200 Baud. I don't have time to fix the SCC, so I'd
appreciate it if someone else would.
There's no way it should be expecting 9600 Baud on the mouse port.
Solaris 2.3 and later support 1200 Baud and 4800 Baud, and earlier
versions support 1200 Baud only. No version of Solaris works with a
9600 Baud mouse.
The workaround allows the mouse to be used in SunView on sun4_60 - I
haven't tested any other drivers.
* split namco c169 roz chip from namcos2 by making it a device (nw)
some reorganization still needed (eg move init stuff to config)
* push on this way, old non-device code was working by chance (nw)
* use std::fill instead of memset
* tidy (nw)
* split out the c355 sprites into a device too (nw)
* this isn't used (nw)
* also not used (nw)
* split out c123 tilemap chip
* modern here too (nw)
* namco system2 sprite chip is a device, move content of machine/namcoic.h to a text file in 'etc' as it's not really code at all, and the cpp file is no longer needed
* Namco System 2 ROZ is a device (so only gets created on games that have it, avoids a crash in old code in tilemap viewer)
* untangle namcofl from namcos2 now that things are devices
* untangle namconb1 from namcos2
* untangle gal3.cpp from namcos2
* untangle namcos2 and namcos21 - part 1 (ugly part)
* untangle system2 and system21, part 2
* use c68 for c68 based games in namcos21.cpp and some cleanup / notes / reorganization / default nvrams
* naming cleanups (nw)
* c123 - move init to device config
* c169 init -> device config
* c355 init -> device config
* new clones
Four Trax (Japan) [ShouTime, The Dumping Union]
note, one of the gfx roms in the MAME set has an 'fx2' label, it should be verified.
also replaced the ROMs for the fourtraxa set, the old ones had a 0x00 fill instead of a 0xff fill but were otherwise identical, it's a weird mod of the World set that hides most of the advertising banners, replacing them with generic ones, presumably for legal reasons?
- Add and identify some extra IOC firmware revisions (v1.3 from Bitsavers)
- More descriptive names for ROMs of latest IOC revision (from Bitsavers)
imds: Remove skeleton driver; ROMs preserved as v1.4 of imds2ioc
* Add huc6230 Emulation
huc6272.cpp : Add ADPCM transfer, Add save states
PC-FXGA for PC-9801 C Bus is released in December 1995 in Japan, Correct metadata
* huc6272.cpp : Fix ADPCM address
* huc6230.cpp : Simpler interpolate
* huc6230.cpp : Fix clamp
huc6272.cpp : Fix ADPCM nibble
* huc6272.cpp : Fix data type
* Revert pcfxga year; PC-FXGA for PC9801 C-bus is not dumped?
* Implement Mitsumi Amiga 500, 600, and 2000/3000/4000/CDTV keyboards
* Add unlabeled keys to UK layout
* Restrict available keyboards depending on system type
* Note that C-A-A reset is now broken on "big box" Amigas as MAME doesn't implement it properly, and the hack providing a fake dedicated reset line has been removed
6502 MCU: fix execute loop
6500/1: implement as device with onboard peripherals
Fix some bogus comments
(nw) New keyboard only has U.S./Canada and UK variants for now. This keyboard doesn't
drive a dedicated reset line, instead using some sequence on the clock line detected by
the host chipset. MAME doesn't support this, so keyboard reset won't work. Also started
documenting the character labels on the keypad NumLock/ScrLock keys for language variants
but still need more pictures.
* Allow <orientation> and <color> to work on group references
* Fix some corner cases where group bounds could be miscalculated
* Fix a corner case where MAME could incorrectly refuse to instantiate groups
* Add more checks to complay.py
* Document more of the layout format
* Clean up some corner cases in layouts with repeating blocks
* Make complay.py validate many more elements and attributes
* Make complay.py easier to use for just validating a layout
* Remove redundant view from Sega VMU layout
* Make buttons visually respond to input in whousetc.lay
* Add view with LED displays as well as terminal for aim65_40 and use repeats
* Clean up some outdated "game" terminology in clifront.cpp
* Initiaise a couple of members in tap/tun network module
* Start documenting layout format
* taptun: add support for Windows
Looking for feedback only at this point, because it's the first time I've attempted any OSD stuff - be gentle.
This extends the existing taptun OSD module to support Windows through the TAP-Windows6 driver (https://github.com/OpenVPN/tap-windows6).
* TAP-Windows6 is GPLv2, however only the header file is required in MAME, and the driver itself is entirely optional.
* I've tried to minimise the size of the diff, rather than completely separate the Windows/non-Windows implementations - not sure which is preferable in this case.
* The license file has Mac(?) line-endings - unsure if they should be normalized or used verbatim.
* Uncertain about the non-Windows case (or the Windows SDL case) - existing code uses __linux__, but I'm not clear on how that works with OSX, for example?
* I can't claim this actually "works" yet, because I don't know enough to configure the tap end of it properly to get networking doing something useful, but I will get there and correct anything necessary in a subsequent real PR.
* minor fixes/improvements (nw)
* Use Unicode Windows APIs, and UTF-8 for MAME
* Deal with unterminated registry string values
* Cancel any pending I/O in destructor
* Eliminates the need for the horizontal/vertical/LCD/SVG layout files
* Screens can now have orientation and physical aspect ratio specified
* RASTER/VECTOR defaults to 4:3, LCD/SVG defaults to square pixels at config time
* System orientation is applied on top of screen orientation
Automatically generated single-screen views and orientation flags in XML
output now work correctly for systems with multiple screens in different
geometries/orientations, e.g. housemnq, rocnms, stepstag, or netmerc.
The "core rotation options" only interact with system orientation.
Allowing multi-screen systems to work well with one monitor per emulated
screen is a complex topic. System orientation also affects the GFX
viewer while screen orientation doesn't. The orientation displayed in
the system selection menu is from the system orientation.
Let me know if I've broken any systems or use cases.
Also, add save state support for std::array/C array nested to any depth.
* rewrote most of the execution for my tlcs870 core
* no longer the case (nw)
* note updates (nw)
* address concerns, const qualify more things where possible (nw)
* more const (nw)
* oops (nw)
* consistency (nw)
- split into separate sources
- fixed paste
- added uart and rs232
- added baud rate clock or brg depending on hardware
- fixed uart status on sys80
- fixed cassette waveform
- lots of tidy up
Input and screen tags are now resolved relative to a layout's owner
device.
Easy way to demonstrate is with: mame64 intlc440 -tty ie15
Previously you'd only get the IE15 terminal's layout and you'd be unable
to use the INTELLEC 4/40 front panel. Now you'll get the choice of
layouts from both the system and the terminal device in video options.
- Added FDC card.
- Cursor now generated by 6845.
New working machines
--------------------
Acorn System 3 (6502 CPU)
Acorn System 5
New working clones
------------------
Acorn System 2
Acorn System 4
* Added ps2timer device to encapsulate Playstation 2 timers.
* Temporarily hacked R5900 core to always have scratchpad RAM mapped at 0x70000000.
* Added reference counting to divtlb so that it does not unmap pages that are still shared with other entries.
* Added a considerable amount of logging to ps2sony.cpp.
-mips3: Added basic Emotion Engine support. [Ryan Holtz]
* Added S bit to TLB mapping.
* Added support for VSUB, VIADD, VSQI, VISWR, VOR, LQ, SQ, MFSA, MTSA, MFHI1, MFLO1, MULT1, DIV1, DIVU1, PEXTLW, PADDUW, PMFHI,
PMFLO, PCPYLD, PCPYUD, SQC2, LQC2 opcodes. [Ryan Holtz]
* hp9k_3xx: fix timer connection for /320 models
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* hp9k_3xx: add HP9122C floppy
Remove HP9895 from the default configuration. 3.5" where
standard on /300 and there's almost no software on it available.
If a user really needs 8" floppy drives on /300, he can do that via
commandline.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* add Intel i8291a GPIB Talker/Listener
Required for the HP 9122C floppy, and used in many other devices.
Basic functionality was implemented to make the HP 9122C work, a few
things are still missing and will be added later. Most of the missing
things where simply not used in the HP9122C so i cannot test them.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* Add HP 9122C floppy drive
These drives where common on HP9000/300 workstations. With the current
implementation TD0's from hpmuseum can be used to boot, and initializing,
reading and writing discs in HP basic works. Tested both high and double
density media. Supported Media formats are TD0 and MFI.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* Remove vram_rw and ctrl_rw wrapper functions
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* topcat: replace hardcoded display width by m_fb_width
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* topcat: prepare topcat for multi plane operation
framebuffer vram is only 1 bit wide.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* 98544: set single topcat plane
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* add nereid mapper used on HP98543/98545 graphic cards
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* prepare for multi-topcat operation
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* add HP 98543 4 plane graphics card
* hp9k_3xx: add hp98543 card
* topcat,nerid: disable VERBOSE
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* hp98543: use required_device_array
* 98543: use required_region_ptr
* 98544: use required_region_ptr
* topcat: add save state support
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* nereid: add save state support
* hp98544,hp98543,topcat: use shared memory space
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* nereid: remove redundant variable
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* topcat, nereid: remove trailing underscore from include guard
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* topcat,hp98543: code style fixes proposed in PR
Signed-off-by: Sven Schnelle <svens@stackframe.org>
- Implemented banking and system/user mode switching.
- Added PolyBASIC 3.0, 3.1, and 3.4.
New clones marked as NOT_WORKING
--------------------------------
Poly 1 Educational Computer (early) [Nigel Barnes, Andrew Trotman]
Poly 2 Learning System [Nigel Barnes, Andrew Trotman]
Poly Development System [Nigel Barnes, Andrew Trotman]
Merged with strnskil.cpp, with modernization and cleanups. (nw)
Add MCFG_SCREEN_RAW_PARAMS. (nw)
Added coin counters to markham, strnskil, banbam and clones.
* softfloat3: do we like this better? (nw)
* softfloat3: it gets the hose again (nw)
* softfloat3: sonofa (nw)
* interpro: wip checkpoint (nw)
* added 6x00 models
* added EDGE graphics skeleton
* split bus/cards into two types
* various fixes/changes
* proposal: move z80daisy* to devices/machine
Seems to me this is a machine, not a CPU? Main reason was to stop the Z80 CPU from being dragged into systems that don't have one just because they use a Z80 family peripheral.
* missed this one (nw)
* missed a spot (nw)
* softfloat3: fix msvc build (nw)
Is this how we do these things? I assume we don't touch the library code itself, and have to "fix" any problems via this header instead?
* softfloat3: do we like this better? (nw)
* softfloat3: it gets the hose again (nw)
* softfloat3: sonofa (nw)
This is a pre-usage import so everyone can get things in line for various compilers. GCC/Clang should be OK on most targets as-is;
MSVC may need to edit 3rdparty/softfloat3/build/MAME/build.h to conform. Please report failure/success with various compilers.
* add topcat template
HP topcat was an ASIC used on HP900/300 graphics cards.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* hook up topcat asic to HP98544
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* topcat: add basic configuration macros for fb planes, height and width
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* hp98544: move logic to topcat video driver
Preparation to support multi plane graphic cards
like the HP98543/98545/98547.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* xtal: add 35.904MHz XTAL
* interpro: slotify mouse (nw)
Needed to make the mouse a slot device to enable it to be connected to graphics boards under development.
* add validity check (nw)
* bt45x: new devices
Basic implementation of various Brooktree RAMDAC devices. Two of these (bt457, bt458) are used by InterPro graphics boards currently under development, the others are unused/untested at this point.
* bt45x: tweak descriptions (nw)
Start replacing special device macros with additional constructors,
starting with ISA, INTELLEC 4 and RS-232 buses.
Allow an object finder to take on the target of another object finder.
(For a combination of the previous two things in action, see either the
INTELLEC 4 driver, or the Apple 2 PC Exporter card. Also check out
looping over a device finder array to instantiate devices in some
places. Lots of things no longer need to pass tags around.)
Start supplying default clocks for things that have a standard clock or
have all clocks internal.
Eliminate the separate DEV versions of the DEVCB_ macros. Previously,
the plain versions were a shortcut for DEVICE_SELF as the target. You
can now supply a string tag (relative to current device being
configured), an object finder (takes on the base and relative tag), or
a reference to a device/interface (only do this if you know the device
won't be replaced out from under it, but that's a safe assumption for
your subdevices). In almost all cases, you can get the effect you want
by supplying *this as the target.
Eliminate sound and CPU versions of macros. They serve no useful
purpose, provide no extra checks, make error messages longer, add
indirection, and mislead newbies into thinking there's a difference.
Remove a lot of now-unnecessary ":" prefixes binding things relative to
machine root.
Clean up some miscellaneous rot.
Examples of new functionality in use in (some more subtle than others):
* src/mame/drivers/intellec4.cpp
* src/mame/drivers/tranz330.cpp
* src/mame/drivers/osboren1.cpp
* src/mame/drivers/zorba.cpp
* src/mame/devices/smioc.cpp
* src/devices/bus/a2bus/pc_xporter.cpp
* src/devices/bus/isa/isa.h
* src/devices/bus/isa/isa.h
* src/devices/bus/intellec4/intellec4.h
* start looking at the extra opcodes in the SSD 2000 type XaviX chip (seems some undocumented 6502 opcodes are replaced with more custom ones)
* (nw)
* the xavix memory mapping gets stranger with each piece of new evidence (nw)
- High level emulation of serial keyboard (only sort of works; probably should be less sophisticated)
- Add double height and double width attributes
- Adjustable start of screen pointer (necessary for SET-UP mode)
- Reconfigure screen for 80/132-column and 50/60 Hz modes
dikeyboard: Add scan_complete callback (nw, sort of hacky but cit101 keyboard works worse without it)
- Use device_resolve_objects to resolve callbacks in output_latch_device (nw)
Note that this renaming is not just for human convenience; genie seems to get confused by modifications to a header called latch.h and decides to recompile everything involving gen_latch.h as well.
* xavix - tidy ups, reorganization, current notes etc.
* didn't mean to push a copy (nw)
* shift some common code around for palette handling (nw)
* lean less heavily on memory system (nw)
* revert 'shift some common code around for palette handling (nw)' to be revisited later.
* add missed include guards (nw)
* new machines marked as NOT WORKING
Skannerz TV [Sean RIddle, Peter Wilhelmsen]
This will need the communication protocol with the barcode scanner unit reverse engeering (the scanner unit has it's own MCU that isn't dumped and for which we have no method of dumping) this also probably means it will need improvements to the general vii.cpp handling of interrupts and serial ports (which Cricket needs too)
The 98603A and 98603B cards have different base addresses and sizes
for the rom region. Split up the cards so that we can boot HP BASIC 4
and HP BASIC 5.1.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
* Move around the debugger hooks to get a small but measurable performance increase
* Remove emucore from external tools
* Improve performance of DSP16 interpreter a little by generating six variants of execution loop
also made rainbow islands extra a parent, since it has it's own game code, own c-chip and is generally considered a semi-sequel rather than a bugfix / revision of the original game.
(best I can tell behavior matches the differences between original and extra that were present in the simulation at least, but obviously the real chip could be hiding more secrets)
* remote488: work started
* remote488: fixed a crash when using socketed bitbangers on Linux machines
* remote488: added ieee-488 remotizer device
* remote488: added remotizer devices to ieee-488 buses of HP9845 & HP85
* remote488: added missing emu.h inclusion
* Revert "remote488: fixed a crash when using socketed bitbangers on Linux machines"
This reverts commit edfeb1768e.
* remote488: nudge..
* remote488: no longer use locale-dependent functions, added commas and
semicolons as msg separators, improved use of util::string_format
* use real dumped c-chip for bonzeadv, remove simulation [Team Caps0ff]
this most likely fixes MT00377, MT00205
* typo (nw)
* missed a file (nw)
* no longer fights (nw)
* tidy here too (nw)
* c+p typo (nw)
* c-chip: use dumped c-chip for Volfied [Team Caps0ff]
interrupt source still needs to be verified, but I've tested this to the end and it works fine with the real dump.
* less static (nw)
* hook the coin counters back up (nw)
* tweaks (nw)
* was too close after tweak (nw)
* add support for dumped superman c-chip too, removed simulation [Team Caps0ff]
also made the 68k and upd7810 use different banked windows into the RAM, this seems to prevent the fighting I was seeing, and also superman suggests that it might be correct, as it puts response values in a bank for the 68k but then changes the window so the 68k can't see them. needs further testing tho (other c-chip dumps might tell us more later)
* use the 68k side handlers on megab too, even if it really doesn't care about anything (nw)
* remove debug structure (nw)
* Turn deprecated declataion warnings on by default and make them non-fatal
* Make output_finder iterable in algorithms and range-based for loops
* Replace a lot of set_something with output_finder
* Fixed building using system utf8proc
* Fixed building using system portaudio
* Allow using system-wide asio headers (1.11.0 or higher required).
* Allow using system-wide glm headers
* Allow using system-wide rapidjson headers
* Put all ext_includedir calls together
* Fixed build failure when SOURCES is defined
* Fixed building using system utf8proc
* Fixed building using system portaudio
* Allow using system-wide asio headers (1.11.0 or higher required).
* Allow using system-wide glm headers
* Allow using system-wide rapidjson headers
* Add 89 in 1 mini console
* Add mc_cb280, similar to sy889
* More VTxx ROMs
* Add more nes_vt systems
* Add SY888B
* Add support for VTxx systems with scrambled instructions (FC Pocket, DGUN2573)
* Add support for Family Pocket, and more FC Pocket games
* Small fixes and reclassifications (nw)
* Support for VTxx scrambled banking (thanks NewRisingSun for help)
* New palette code from NewRisingSun, etc
* Various VT03 fixes, several systems including ZDog now working
* nes_vt comment/status updates (nw)
* Refactor m6502_vtscr (nw)
* create derived 6502 type for XaviX because it has at least one custom 4-byte opcode that doesn't fit any other type.
treating that opcode as NOP for now.
have a feeling it might be something to do with the other integrated hardware, might be 'execute co-processor code chain at this address' or something similar
It isn't a standard JSL (Jump Subroutine Long) like the SNES cpu opcode in the same place as this, it seems to point at some code-like structures tho)
could also be a secondary operation mode with different encoding like ARM's Thumb mode tho I guess.
We currently only have a single XaviX based dump (taitons1) but there are more on the way. I'm going to see if the code flow makes any sense at all with these missing, or if any of it gives a clue as to what they should actually do.
* xavix - let's call these callf and retf then
after further investigation these are some kind of extra 'long jump' subroutine / task handlers, the 0x80 also being a custom opcode was throwing me off trying to identify them before.
looks like they might have been hacking 65816 features into the regular 6502 core?
* prepare for extra address bits (nw)
* better program flow (nw)
- P.R.E.S. Advanced Plus 3/4
- Advanced Quarter Meg Ram
- Cumana Floppy Disk System
- Sound Expansion
- Sound Expansion v3
- Stop Press 64
- Solidisk EFS
New working software list additions
-----------------------------------
electron_cart: Solidisk EFS 2.1E
New NOT_WORKING software list additions
---------------------------------------
electron_cart: Stop Press 64
Software list items promoted to working
---------------------------------------
electron_cart: Advanced Plus 3, Advanced Quarter Meg RAM, Slogger Electron Disk System, Sound Expansion v3
* fix/tidy tvboy driver (nw)
* missed file (nw)
* framework for adding 'gamebooster' (need to figure out how it actually works / maps tho) (nw)
(code based on zx spectrum expansion port code)
* (nw)
* lost a line (nw)
* allow it to run (nw)
* continued work (nw)
* mame64 psj -parallel gamebooster -cart tetris now works
* rm outdated (nw)
* remove unneeded code (nw)
* limit accesses, log unexpected ones, might have custom banking (nw)
* write bytes in an order that keeps the gb code happier , sml boots (nw)
* various reorganization of radica and vtech stuff
* missed this (nw)
* correct file (nw)
* newlines and stuff (nw)
* less c_str (nw)
* worse (IMHO) filenames (nw)
* format got messed up (nw)
* some bits for golden tee (nw)
* get us renderng something in rad_gtg (nw)
* some basic inputs (nw)
* further improvements to the Golden Tee Home Edition (radica eu3a14)
added Radica Sensible Soccer [Sean Riddle]
* tilebase handling (nw)
* golden tee home video improvements (nw)
Revert "Removal of voltage_regulator_device (nw)"
This reverts commit 1af133752a.
Revert "New way to provide DAC reference inputs (nw)"
This reverts commit 1c6a7ab40c.
* restored basic support for SANITIZE make option
* disabled some unwanted UBSAN checks / enabled nullability checks / enabled ASAN use-after-scope checks (nw)
* new NOT WORKING
Space Invaders (Radica, Arcade Legends TV Game) [Team Europe, Sean Riddle]
(not sure what this is really called, it's a 5-in-1, it probably contains a customized 6502 core, or there should be an internal bootstrap rom)
* typo (nw)
* based on a jump to e092 which looks like it should maybe skip an opcode this seems a more possible mapping (nw)
* actually vectors are right there (nw)
* memory map improvements (nw)
* various notes etc. (nw)
* various banking bits (nw)
* actually remember to hook up the read (nw)
* clearly inputs (nw)
* show that the game is actually running, even if we don't understand the video format, there's clearly some kind of tilemap structure in ram (nw)
* this is bitmap ram on qix (nw)
* didn't mean to change this (nw)
* gfx are stored more like texture pages?! (nw)
please people, remember to keep source UTF-8 and if you're committing on behalf of others, clean up indents to meet MAME conventions
anyone can run srcclean over a submission and see what will get hit
promoted China set of Oriental Legend 2 to working
promoted Knights of Valour 2 New Legend to working
as each game/region requires a valid default card in order to save said cards are part of romset.
(there's probably a cleaner way to do the device finder stuff but I forgot and can't find reference)
An implementation of the National Semiconductor DP8510 BITBLT Processing Unit. This is used on the InterPro GT family graphics boards, and this implementation seems to be correct enough to enable me to progress there, hence the PR. While I'd love to have another system to test against, I'm not aware of any other systems that ever used this device other than some NatSemi reference designs, which are not (yet) in MAME.
* hp9845 & hp64k: fixed breakage caused by c46e1007a8
* hp9845: HLE of internal printer added
* hp9845: fix to printer interrupt line
* hp9845: moved src/devices/machine/hp9845_printer.* to src/mame/machine
Disassemblers are now independant classes. Not only the code is
cleaner, but unidasm has access to all the cpu cores again. The
interface to the disassembly method has changed from byte buffers to
objects that give a result to read methods. This also adds support
for lfsr and/or paged PCs.
Implementation of 28F010 and family flash memory devices. These are not compatible with the JEDEC-standard flash command protocol implemented in intelfsh.
* Don't use device_serial_interface for transmit - it can't support sync modes, on-the-fly register updates, and other weirdness.
* Better modelling of 1-deep transmit queue.
* Better RTS/CTS behaviour.
* Completely overhauled interrupt logic - vectors should be correct for most async modes.
* Implemented different auto-reset receive errors in MPSC vs SIO.
* Implemented SDLC transmission including bit stuffing, transmit CRC, abort, and underrun/end-of-message behaviour.
Added an SDLC consumer device that logs SNA frame headers and data.
The analogue joystick is now emulated. Also fixed a few minor issues
with the memory map.
This also adds a generic Z80 dasisy chain device, for use in drivers
with non-Z80 peripherals.
Use "mame einstein -pipe tk02" to attach the 80 column device.
* Removed no longer needed einstei2 driver
* Added cursor rendering to the 80 column device
* Added support for the alternate character set (use dip switch to
change)
* Cleaned up and added save state support to the 80 column device
Many changes in this PR, including the following:
* added support for InterPro 20x0, 24x0 and 27x0 systems
* added support for SR bus/slot devices
* added support for Ethernet, graphics, keyboard and mouse
* added support for serial DMA
* improved timer, interrupt and DMA handling
* improved comments/documentation
Note: ioga is still a major work in progress, and most of the other *ga's don't do anything useful yet, however this build can do some new and useful things, and it's closer to OS boot than before, as well as cleaned up in some of the better known areas.
* added basic support for the system bus variously referred to as SR, SR bus, SRX and CBUS
* added an initial GT graphics card implementation, only supports the video ram and ramdac for now, but sufficient to boot the diagnostic monitor in graphics mode
* added a high-level emulation of the InterPro keyboard
protection handled etc. written from scratch based on notes from Kevtris and Peter
banking in the slot system seems somewhat archaic compared to proper modern banking, but this is how all other drivers I saw using slot roms did it.
---------------------
E-Touch Mahjong Series #6: Scandal Blue - Midara na Daishou [ShouTime, Team Japump, The Dumping Union]
E-Touch Mahjong Series #7: Trap Zone - Yokubou no Kaisoku Densha [ShouTime, Team Japump, The Dumping Union]
--------------------------------------
Ton Puu Mahjong [ShouTime, The Dumping Union]
This is only a skeleton driver. ShouTime will keep the PCB only for a few more days, so if someone has the time to have a look.. (nw)
* Remove duplicate code
* Screen raw parameters and XTAL values
* Added PAL dumps for supbtime [Luiskiko/jammarcade.net]
* Add dip switch locations to all games
* Emulate LC7535 based volume control for Dragon Gun board based games
* Add DSW3 and DIP locations to Captain Avenger
* Reorganize driver and start cleaning it up (in progress)
Specifically, this creates a call osd_get_command_line() that returns UTF-8 command line arguments as std::vector<std::string>. On non-Windows platforms, this does nothing more than build the vector. On Windows, this invokes GetCommandLineW() and CommandLineToArgvW(). This also attempts to unwind usage of wmain()/_tmain() on Windows, which is not standard.
Related to this, this fixes a bug in Imgtool; specifically, non-7 bit ASCII was not being handled correctly in Windows.
This is really an admission that the way that Windows handles Unicode and command line arguments sucks, and it is my belief that having a wmain() or _tmain() declaration specific for Windows is a worse solution. C'est la vie.
I'm very open to the idea that src/osd/osdcore.[cpp|h] is not the best place to do this. Let me know if I should move it.
------------------------------------------------------
Mephisto Modena [yoyo_chessboard, Sandro Ronco]
Mephisto Monte Carlo [Sandro Ronco]
Mephisto Monte Carlo IV LE [Sandro Ronco]
Mephisto Mega IV [Sandro Ronco]
Used by games in the cninja and deco32 drivers. This implies proper
VBlank IRQ ack for all games now. Also added and improved raw screen
parameters for various games.
* hp85: added support for optional ROM cartridges. Started optional ROM
sw list (not finished).
* hp85: refactored mapping of opt. ROMs according to cuavas' comments
* initial skelethon: ControlID X628 fingerprint reader
* first draft of an implementation of the NT7534 device (LCD controller)
* fix emulation of ControlID x628 + NT7534 LCD controller
* cidx628: fix LCD color palette on Control ID x628 driver
* Adding a header with details of the hardware. This is the first MAME driver with an LCD controlled by a NT7534 chip, so I wrote an initial implementation of that new device.
unkfr belongs in 4enraya (which was my guess when it was mentioned)
doesn't seem much point in having a complete non-working driver in the source for it when it boots as a romswap.
Basic system is done and it can boot from floppy, but there are still
many things to add, therefore marked as NOT_WORKING for now.
New machines added as MACHINE_NOT_WORKING
-----------------------------------------
Kontron PSI98 [Dirk Best, rfka01]
slots uncovered
(nw) It seems at some point someone didn't realise that choosing the
same option from a SLOT_INTERFACE in multiple slots creates multiple
instances of the same device type, and this got copy/pasted everywhere.
* Support serving static assets, use for stylesheet, script and images
* Better error pages, reject unsupported HTTP methods
* Replace lists with sortable tables with more detail (click headings to sort)
* Add pages for exploring source files, link from machine pages
- Can start from full source file list at http://localhost:8080/sourcefile/
(nw) JavaScript performance can drop when sorting really big tables,
e.g. the list of all source files, or the list of machines in some of
the fruit machine drivers. This update doesn't expose machine/device
information, just consolidating what's there. The wsgiref server is
adding headers to prevent caching, I'll look for a workaround.
output from -listxml verb. Compatible with Python 2.7 or Python 3.
Requires at least SQLite 3.6.19 for foreign key support.
This serves a few purposes:
* Demonstrating some things that can be done with -listxml output
* Providing a reference implementation for useful queries
* Helping ensure our XML output isn't completely useless
* Providing additional queries over MAME's auxiliary verbs
* Proper glob support unlike the broken implementation in MAME right now
Right now, it's a bit ugly to use. You can only load into a completely
clean database, and you need to manually create the schema. I'll
address this later. The default database filename is minimaws.sqlite3
(you can override this with --database before the verb on the command
line). Loading isn't particularly fast, but query performance is very
good.
Create a database first:
rm -f minimaws.sqlite3
sqlite3 minimaws.sqlite3 < scripts/minimaws/schema.sql
Now you can load it using a MAME binary or XML output (use one of these
options, not both):
python scripts/minimaws/minimaws.py load --executable ./mame
python scripts/minimaws/minimaws.py load --file mame0188.xml
Once that's done you can do queries:
python scripts/minimaws/minimaws.py listfull
python scripts/minimaws/minimaws.py listclones "*cmast*"
python scripts/minimaws/minimaws.py listsource "*mous*"
python scripts/minimaws/minimaws.py listbrothers "intl*"
These work much like the equivalent MAME verbs, but without the overhead
of loading MAME's static data. But there's one already query that you
can't easily do with MAME:
python scripts/minimaws/minimaws.py listaffected "src/devices/cpu/m6805/*" src/devices/sound/qsound.cpp
This will list all runnable systems that use a device defined in any
file under devices/cpu/m6805 or in devices/sound/qsound.cpp (you can
specify and arbitrary number of files or glob patterns). This may be
useful for planning regression tests.
Another thing this does (that gives rise to the name) is serving
information over HTTP. It's implemented as a WSGI, and it mainly uses
GET requests. This means it can run hosted in Apache mod_wsgi, or
cached by Apache mod_proxy, Squid, nginx, or something else. It can
also run out-of-the-box using wsgiref.simple_server components. The
default port is 8080 but this can be changed with the --port option.
Start the web server with the serve verb (stop it with keyboard
interrupt ^C or similar):
python scripts/minimaws/minimaws.py serve
Right now it's rather crude, and doesn't list devices for you. This
means you have to know the shortname of a machine to get a useful URL.
For example, you can look at a driver and see its parent set and the
devices it references:
http://localhost:8080/machine/kof2000n
Or you can look at a device, and see the devices it refereces, as well
as the devices/systems that reference it:
http://localhost:8080/machine/zac1b11142
The links between devices/systems are clickable. They might 404 on you
if you used a single-driver build with broken parent/clone
relationships, but they should all work in a full build that passes
validation.
There's still a lot to do. In particular I want to demonstrate how to
do live DIP switch preview and dynamic slot discovery. But I've already
discovered stuff in the -listxml output that's less than ideal with
this, so it's helping.
appropriate containers, remove misleading const qualifiers, reduce
repeated XML walking.
(nw) Groups aren't parameterised, so they aren't as useful as they could
be (yes, it's on my TODO list). However, it's already useful for
putting a common set of elements in multiple views, potentially at
different locations/scales. See intlc44.lay and intlc440.lay for
examples of the level of copypasta this can eliminate. Be aware that
groups with explicit bounds don't clip thair content, it's only used for
calucating the transform matrix.
These humble 16-pin logic devices were commonly used in 8-bit arcade games to control coin counters/lockouts, IRQ flipflops, graphics banking, slave CPU reset lines, discrete audio triggers, screen flipping, serial EEPROMs and much else. Over 100 drivers and a few bus devices have been updated to use the new implementation, and a great deal of research has gone into documenting the physical location of these devices on actual PCBs in the source. Write handlers have been provided for both orthodox and somewhat less conventional memory mappings.
Incidental to this update, coin counters and/or lockouts have been added to Atari System 1 games, Basketball, Gauntlet, Gyruss, Hana Yayoi, Hole Land, Jr. Pac-Man, Mahjong Sisters, Pooyan, Roc'n Rope, Squash, Thunder Hoop, Time Limit, Time Pilot '84 and many others. This also cleans up coin counter behavior in Sauro and Rally Bike.
(nw) The purpose of committing this change, which has been several months in the making, early in the 0.189GIT cycle will be to allow time for fixing potential regressions; I've fixed a number of drivers that lost sound from this for various reasons (hnayayoi.cpp having missing or garbage ADPCM was particularly painful, since the three games in that driver all work slightly differently), but I can't test all affected drivers exhaustively. @Tafoid, don't bother running automated screen capture comparison tests on this, as many drivers are now expected to have the screen flipped for the first few seconds after reset.
- made ds5002fp store internal ram and sfr registers to nvram as they're battery backed
- this includes the 'configuration' details which are actually programmable, so don't belong in the 'MACHINE_CONFIG' section but rather as part of the default NVRAM
- as the exact format of the NVRAM storage is not known, and as not to break compatibility with the 'wrally' set Gaelco offer these bytes are now configured in the ROM LOADING like default NVRAM. Slightly awkward, but probably the best way.
- made the SRAM (external to DS5002FP, but still powered by the same battery) also save content, some games actually use it to store scores etc. as well as the game code.
- cleaned up the Touch and Go Dallas dump, and added some preconfigured internal RAM so that it actually loads the score data from the SRAM properly
- prepared all other drivers for the adding of the SRAM dumps, removing old 'never going to work' simulation code in the process. To do this a wrapper / interface device for the Gaelco Dallas + SRAM box was created.
out of whatsnew
Alligator Hunt was dumped and works, but not yet added, want to verify on a 2nd PCB first as the process does corrupt some bytes and a couple had to be handfixed, so the only way to know for sure is multiple dumps.
* Fix save/load states in Emscripten build
* Simplified Emscripten integration points
* Moved standalone JS functions to be static member functions of running_machine
* Improved Emscripten main loop
* Use convenience functions for cleaner code
As an added bonus, this now allows for proper shutdown of the running machine when running in the Emscripten environment - previously, attempts to exit the program were just being ignored.
- Merge driver with goldnpkr.cpp source to get working sound (graphics and sound should be identical)
- Add version numbers to set names
- Promote megadpkrb to WORKING (with one caveat)
What works:
* HP85A machine with 16K of RAM
* Capricorn CPU works
* Keyboard works (with minor issues)
* CRT text / graphics modes work (correct speed is not emulated yet so service ROM complaints)
* BASIC is usable
What is missing (and I'll have hopefully working soon):
* HW timers
* Beeper
* Integral printer
* DC100 cassette drive
* Extension ROMs
* I/O modules (especially the HPIB interface so that we can hook up floppy drives)
* Other models in the family (e.g. HP86)
create a uPD78C11 derived CPU type for this purpose, with internal ROM map
use internal ROM map for other uPD78C10 chips as it's always present.
add missing NO_DUMP definitions to various games using C-Chips with correct size etc.
pump megablast through the device code as really all it ever does is bank the c-chip window and test the RAM.
* Implemented front panel mode switches/LEDs and reset switch
* Added skeleton bus for "universal" slots and connected control lines
(nw) Default keyboard mapping is annoying because left shift, Z and X
are used both for typing into the TTY and switching program bank. You're
better off changing the mapping to make it less annoying or using a
socket and talking to it with telnet.
* Renamed to MCS-40.
* Emulated 8-clock instruction cycle, interruptible at any point.
* Converted TEST input to an input line.
* Added SYNC and CM output lines.
* Added support for 4040 CY output, logical operations, extended registers, ROM banking and disassembly.
* Made I/O space mapping more flexible to support the variety of peripherals available.
* Notable missing features are 4040 interrupt and halt, and "program memory" space.
* This turns the current state save feature to a menu; one can still press 0-9, but you can also browse a menu when loading and saving state
* Fixed some issues requested by Vas Crabb
* Updated state menu to support arbitrary character slots
* WIP, transitioned 'entry_char' to std::string
Still need to address Joystick and FR keyboard concerns
* Reimplemented state save support with joystick buttons
* Changed the state menu to be "code driven" rather than "character driven"
When the menu is displayed, it will look at the filenames, and translate them to a visual representation as per the user's locale
* Vas feedback
------------------------------------
Spirit of 76 [PinMAME]
New not working clone
-----------------------------------
Black Knight 2000 (PF-1) [PinMAME]
* This turns the current state save feature to a menu; one can still press 0-9, but you can also browse a menu when loading and saving state
* Fixed some issues requested by Vas Crabb
* Updated state menu to support arbitrary character slots
sound board, completing the tromba circuit
(nw) I'm not sure whether the model works properly or not, but in the
circuit where it's used, I don't think it can work properly with the
current TTL output model. A capacitor is charged by the Q output of a
74LS74 flipflop (U3A) until the voltage passes the Schmitt trigger's
threshold, causing it to reset the flipflop. However, the positive
trigger voltage of the Schmitt trigger is 1.6V, but our TTL output model
has a high output voltage of 1.0V (see nl_base.cpp:89). I realise the
simplified model of TTL logic with high impedance inputs and outputs
behaving as though thery're loaded is convenient and fast to simulate,
but it's not detailed enough for applications like this where
7400-series chips are used in analog circuitry. This is what held me up
last time I tried adding a netlist for this sound board.
- OPENMP refactored. All OPENMP operations are now templatized in pomp.h
- We don't need thread-safe priority queue. Event code updating analog
outputs now runs outside the parallel code.
(nw)
* Tromba (trumpet) sound is not working - requires Schmitt trigger device
* Connecting cassa (bass drum) swamps other instruments so it's disconnected for now
* Mixing melody sound with speech/SFX is not done in netlist (should be)
* Relative levels of melody/speech/SFX are probably still wrong
(nw) A good test case for this is the Money Money driver (monymony).
There's a bit of buzzing on this one as well. The problem with the
cassa could be caused by running into non-ideal characteristics of opams
again (the LM3900 seems to ignore the V+ value supplied to it). When
the netlist library gets Schmitt trigger support, the tromba can be
completed. Unfortunately, the tromba is a key part of the
characteristic sound of these boards, so you really notice when it's
lacking.
(nw) It doesn't work quite right yet. The "Hammer" and "Pest" sounds
are generated by free-running 555/556 timers and gated with LM324
applifiers. For whatever reason, the netlist system produces a kind of
buzzing from the "Hammer" circuit when it's supposed to be suppressed,
and it doesn't think the pest sound should be suppressed completely so
you can always hear it at a low level in the background. The "Cheese"
circuit is a bit weird - either they're using the base-emitter junction
of a 2SC945 as a signal diode, or there's an error in the schematic
(collector is shown unconnected). Connecting this part of the circuit
causes the netlist system to hang, so R2/R3/C8/Q2 are not connected for
now.
* move rarely-used output and pty interfaces out of emu.h
* consolidate and de-duplicate forward declarations, also remove some obsolete ones
* clean up more #include guard macros
* scope down a few more things
(nw) Everyone, please keep forward declarations for src/emu in src/emu/emufwd.h -
this will make it far easier to keep them in sync with declarations than having
them scattered through all the other files.
The core changes are:
* Short name, full name and source file are no longer members of device_t, they are part of the device type
* MACHINE_COFIG_START no longer needs a driver class
* MACHINE_CONFIG_DERIVED_CLASS is no longer necessary
* Specify the state class you want in the GAME/COMP/CONS line
* The compiler will work out the base class where the driver init member is declared
* There is one static device type object per driver rather than one per machine configuration
Use DECLARE_DEVICE_TYPE or DECLARE_DEVICE_TYPE_NS to declare device type.
* DECLARE_DEVICE_TYPE forward-declares teh device type and class, and declares extern object finders.
* DECLARE_DEVICE_TYPE_NS is for devices classes in namespaces - it doesn't forward-declare the device type.
Use DEFINE_DEVICE_TYPE or DEFINE_DEVICE_TYPE_NS to define device types.
* These macros declare storage for the static data, and instantiate the device type and device finder templates.
The rest of the changes are mostly just moving stuff out of headers that shouldn't be there, renaming stuff for consistency, and scoping stuff down where appropriate.
Things I've actually messed with substantially:
* More descriptive names for a lot of devices
* Untangled the fantasy sound from the driver state, which necessitates breaking up sound/flip writes
* Changed DECO BSMT2000 ready callback into a device delegate
* Untangled Microprose 3D noise from driver state
* Used object finders for CoCo multipak, KC85 D002, and Irem sound subdevices
* Started to get TI-99 stuff out of the TI-990 directory and arrange bus devices properly
* Started to break out common parts of Samsung ARM SoC devices
* Turned some of FM, SID, SCSP DSP, EPIC12 and Voodoo cores into something resmbling C++
* Tried to make Z180 table allocation/setup a bit safer
* Converted generic keyboard/terminal to not use WRITE8 - space/offset aren't relevant
* Dynamically allocate generic terminal buffer so derived devices (e.g. teleprinter) can specify size
* Imporved encapsulation of Z80DART channels
* Refactored the SPC7110 bit table generator loop to make it more readable
* Added wrappers for SNES PPU operations so members can be made protected
* Factored out some boilerplate for YM chips with PSG
* toaplan2 gfx
* stic/intv resolution
* Video System video
* Out Run/Y-board sprite alignment
* GIC video hookup
* Amstrad CPC ROM box members
* IQ151 ROM cart region
* MSX cart IRQ callback resolution time
* SMS passthrough control devices starting subslots
I've smoke-tested several drivers, but I've probably missed something. Things I've missed will likely blow up spectacularly with failure to bind errors and the like. Let me know if there's more subtle breakage (could have happened in FM or Voodoo).
And can everyone please, please try to keep stuff clean. In particular, please stop polluting the global namespace. Keep things out of headers that don't need to be there, and use things that can be scoped down rather than macros.
It feels like an uphill battle trying to get this stuff under control while more of it's added.
-----------------------------------
Space Cyclone [David Haywood, Nicolas Francfort, Sean Sutton, Tourniquet, ShouTime, Anonymous Donator, ranger_lennier, David Stevens, Mr. Goodwraith, John Wilke, Paul Vining, Ryan Gatto, rtw, Jan Stuhler, Rod_Wod, Elliott Kipper, Greg Stout, *=/STARRIDER\=*, Ross Esposito, Paul Gaulton, Chris Heflin, Anonymous Donator from Switzerland, Fabien Marsaud, Surgeville, krick, B2K24, Anonymous Donator from Italy, David Jorge, Andrea Babich, Ciacchi Stefano, Mucci, gamez fan, Brian Troha, VFR750P, anonymous, Mr. Anonymous from Outer Space, InsertMoreCoins, Game Preservation Society, dax_PL, Russell Howard, Peter Wilhelmsen, Sébastien Monassa, f205v, Smitdogg, Gerald (COY), Brian Sutherland, The Dumping Union]
- Create device_palette_interface, which takes over most functionality from palette_device except for the initialization/decoding routines and RAM interface.
- Update screen_device and device_gfx_interface to use a device_palette_interface object rather than a palette_device. This necessitates slight alterations to a few drivers and devices.
- Modify v9938 and v9958 to use the new device_palette_interface rather than a subdevice. This entails breaking a cyclic dependency between device_video_interface and screen_device for this case.
-----------------------------------
Gaelco Championship Tuning Race [Mark F., Smitdogg, The Dumping Union]
Also renamed the driver from tokyocop.cpp to gaelcopc.cpp. Other game on this hardware is Ring Riders. (nw)
-----------
Unknown Poker Game by Chain Leisure [Gerald (COY), The Dumping Union]
My name as the copyright holder is a placeholder. Please remove as soon as someone fleshes this driver out. (nw)
nes: Fix debug output when reading iNES headers. (nw)
nes/ppu2c0x: Improved PAL clone timings. (nw)
nes/n2a03: Refactored clock definitions [includes other drivers using the
N2A03] (nw)
nes: Improved refresh rates and timings to reflect nesdev (nw)
nes: Softlist improvements and corrections [koko, mkgoogoo and others] (nw)
nes: Verified koko in the softlist as a good dump (nw)
nes: Softlist additions [subor5, subor6, subor10, subor11, subor13, doolybld]
(nw)
New not working machines added: Subor SB-486, M82 Display Unit (PAL) (nw)
nes: Marked drpcjr as NOT WORKING due to missing hardware. (nw)
New working machines added: Micro Genius IQ-501, Micro Genius IQ-502, Dendy Classic 2 (nw)
nes: marked dendy as a clone of iq501 (nw)
Patrick Mackinlay
