* move princ out of prestige.cpp (it should have never been put there) and into a new driver
fix graphic alignment on the salter gym machines, also promote htem both to working (the hang I saw before on cycle doesn't seem to happen now)
made a note in redclash.cpp about possible sets needing rearrangement
note, princ uses a F2MC-16L based CPU, I don't believe we have a core, but there are plenty of docs available should somebody want to write a disassembler at least.
* reparent the RedClash sets, it appears to be a Kaneko game (Cat logo in the corner etc.)
* change guess (nw)
--
Big Karnak (Modular System) [Recreativas.org, ArcadeHacker, ClawGrip, David Haywood]
as with other Modular System things, it's not really very close to original hw at all (and uses different boards in a different configuration to other modular system setups) so new driver
* rad_hnt3 misc improvements (nw)
* better support for alt modes used in rad_hnt3 and rad_foot
* tidy/comments (nw)
* test note (nw)
* actually not a special case (nw)
* document other test modes (nw)
* palette selection improvements (nw)
* switch according to test mode (nw)
* improved palette handling for rad_foot (7bpp mode)
* ramsize (nw)
* exploring the ram based layer (nw)
* ram tile layer in hnt3 is 2bpp, hardcode stuff for now until we've found the proper register bits
* slight refactor (nw)
* some palette fixes (nw)
* fix 2bpp tile colours (nw)
* rename rad_eu to elan_eu
* rework tile pri (nw)
* refactor (nw)
* note updates (nw)
* kludge (nw)
* some weird regs notes (nw)
* new NOT WORKING clones
---
Gals Panic (Modular System bootleg) [Juan Romero, Recreativas.org, ClawGrip, David Haywood]
these things are *ugly* from a hardware perspective (massive 6 board stack just for Gals Panic with many, many code hacks to work around hardware changes) so I felt it best to create a new driver with the background bits copy+pasted; the sprites + sound system specific to these bootlegs will need adding.
* bleah (nw)
* Bally pinball by35: Move pinball sound boards to a new file.
* Bally pinball by35: Move as8888 code to a proper device.
* Bally pinball by35: Add Cheap Squeak sound board.
* m6801: Fix bug where irq is never triggered.
* Bally pinball by35: Mark the AS888 games as non-skeleton.
* Bally pinball by35: Refactor state classes.
* Add support for pcnfrk2m - Percussion Freaks 2nd Mix (GE912 VER. KAA)
* WIP audio for k573dio
* WIP
* Move 3rd party library to 3rdparty folder
* Use MAME's BIT and bitswap
* Fix regression which caused songs to stutter/lag when they should have been read completely in one shot
* Replace gain_to_db switch with equivalent math
-newport: Unified command handling, should function better and faster as a result. [Ryan Holtz]
-hpc3: Added intstat register and DAC volume controls. [Ryan Holtz]
Added IBGR444 format to palette_device.
Minor consistency fix to laserbat.cpp. (nw).
New machines marked NOT_WORKING
-------------------------------
Star Rider
* Start fixing OS9 disk handling
* Got it working, now need to refine and test
* Almost complete. Doing more testing...
* Tested aginst a varient of sotware. Solved bug. Cleaned up tabs.
* Turned on sector interleaving in OS9_DSK and retested.
Eventually, the svg should be used instead of the pre-rendered ppm.
I'm a little afraid of the performance impact of the 3840 outputs
though, so one thing at a time...
- it's a newer SoC (with a lot more capabilities, eg rotate, zoom, twice the sound channels)
- it uses an updated unSP core (with some extra opcodes)
also made the modifications needed to allow for extension of the unSP + disassembler once we've worked out what the extra opcodes are.
Split video functions into video/raiden2.cpp, Cleanup ACCESSING_BITs, Fix naming, Reduce runtime tag lookups, Reduce unused, Add save state for sprite encryption values
Fix xsedae config because This game is running into modified Zero Team Hardware, And second OKI chip/surface are not exists.
raiden2.h : Use protected:/private:
r2dx_v33.cpp : Fix compile, Fix naming, Reduce runtime tag lookups, Reduce duplicates between raiden2.cpp
This effectively reverts b380514764 and
c24473ddff, restoring the state at
598cd52272.
Before pushing, please check that what you're about to push is sane.
Check your local commit log and ensure there isn't anything out-of-place
before pushing to mainline. When things like this happen, it wastes
everyone's time. I really don't need this in a week when real work™ is
busting my balls and I'm behind where I want to be with preparing for
MAME release.
- Fix typo'd constant in m68kmmu that prevented trapping user accesses to kernel space
- Remove need for intrusive m68k modifications
- Fix crash in 3c505 networking
- Fix Domain/OS booting in Normal mode
* code shuffle (nw)
* refactoring (nw)
* make it actually possible to control epo_guru. note, chase scenes seem to run in slow motion, while the timer runs at normal speed, making them impossible, need to fix that before promoting.
* (nw)
* 4 bits either way works better in practice
* promoted to WORKING
---
Gururin World (Japan) [David Haywood, Sean Riddle, Peter Wilhelmsen. ShouTime]
* tidy (nw)
* some more dirt rebel inputs (nw)
* shuffle some code around (nw)
* shuffle some code around (nw)
* fix controls in Popira 2
* put stuff in better place (nw)
* machines promoted to WORKING
---
Popira 2 (Japan) [David Haywood, Peter Wilhelmsen, Sean Riddle, ShouTime]
* remove old comment (nw)
-astrocde: Various changes. [Ryan Holtz]
* Added I/O access handling to expansion slot.
* Added INS8154 I/O functionality to Blue RAM boards (RAM not yet hooked up).
* Hooked up cassette saving and loading to Blue RAM boards.
- 80 column card with SDX in CP/M mode.
- ROM/RAM banking fixed for CP/M, and MTX500 now correctly detected.
- Support for Type 03 and Type 07 .mfloppy images.
- Added alternate MTX2 romset (German).
- Keyboard ROM now selected in Configuration.
- Quickload .RUN files.
-----------------------------------------
Advanced Pico BEENA: Fresh Pretty Cure [Team Europe, R. Belmont]
This is a little weird because it's a new system and we have a cartridge dump but not the BIOS.
* Disassembly names Monitor ROM entry points, I/O locations, and common zero-page locations
* Disassembly shows ProDOS calls with the call name and lets you step completely over them
* new WORKING machines
---
Winnie the Pooh - Piglet's Special Day (JAKKS Pacific TV Game, Game-Key Ready) [Sean Riddle, 21 external donators]
Spider-Man (JAKKS Pacific TV Game, Game-Key Ready) [Sean Riddle, 21 external donators]
Dora the Explorer - Race to Play Park (JAKKS Pacific TV Game, Game-Key Ready) [Sean Riddle, 21 external donators] (previous 'Race to Play Park' was renamed to 'Nursery Rhyme Adventure' last week)
new WORKING software list additions
---
jakks_gamekey_mv:bcatdoc Black Cat & Doc Ock [Sean Riddle, 21 external donators]
* notes (nw)
* actually demote jak_pooh for now, one of the minigames is very broken (nw)
* give jak_sdoo a menu button (nw)
* give default set of inputs a pause / menu button too (nw)
* describe problem better, half of the issue is a DRC bug (nw)
* new NOT WORKING
---
Excite Boxing (Japan) [Sean Riddle, Peter Wilhelmsen]
* new WORKING machines
---
Nicktoons (JAKKS Pacific TV Game, Game-Key Ready) [Sean Riddle, 22 external donators]
new WORKING software list entries
---
jakks_gamekey_nk:volbird Nicktoons Vollyball & Birdie Putt
new NOT WORKING machines
---
Dream Life [Sean Riddle]
One Piece - Virtual Punching Battle (Japan) [Sean Riddle, Peter Wilhelmsen]
* new machines marked as NOT WORKING
---
Challenge Ai-chan! Excite Ping Pong (Japan) [Sean Riddle, Peter Wilhelmsen]
probably just needs inputs mapping
* new NOT WORKING machines
---
Play TV Soccer [Sean Riddle, Peter Wilhelmsen]
again, needs inputs
* new WORKING software list addition
---
jakks_gamekey_nk:popsnow Spongebob Sponge Pop & Snowball Showdown (15 AUGUST 2005 D) [Sean Riddle, 22 external donators]
* xavix - support global tile flipping
* new NOT WORKING software list entries
---
monon_color:bigwolf Xǐyángyáng yǔ huītàiláng-juézhàn miē xīng [Peter Wilhelmsen, zhongtiao1]
* new NOT WORKING software list additions
---
sega_beena_cart:fpc Fresh Pretty Cure [Sean Riddle, Team Europe]
New WORKING machines
---
Ms. Pac-Man 5-in-1 (Ms. Pac-Man, Pole Position, Galaga, Xevious, Mappy) (JAKKS Pacific TV Game, Game-Key Ready) [Sean Riddle, Peter Wilhelmsen, 19 external donators]
Disney Princess (JAKKS Pacific TV Game, Game-Key Ready) [Sean Riddle, 20 external donators]
New WORKING Software List entries
---
jakks_gamekey_nm:nrxdig New Rally X & Dig Dug [Sean Riddle, Peter Wilhelmsen, 19 external donators]
note, Pole Position is not really very playable at the moment due to raster rendering glitches, the rest are, aside from some obvious sound issues (nw)
New machines marked as NOT WORKING
---
Wheel of Fortune (JAKKS Pacific TV Game, Game-Key Ready) [Sean Riddle, 20 external donators]
There is a video rendering glitch (lkely another off by x lines raster issue) causing the letter selection text to not render properly, it appears the letters scroll instead of the text scroller below, which doesn't. (nw)
-spg2xx: Make rowscroll offset configurable, can't find register to control it, but JAKKS games need 0, while the chinese stuff needs 15 (nw)
-jak_wof: Marked as working, analog wheel isn't emulated, but is optional (I don't see where / how it maps) (nw)
-jak_wof: Improved inputs (nw)
-gamekeys now save to the gamekey seeprom not the system one (nw)
* new WORKING Software List entries
---
gamate:fortress Fortress of Fierceness [Peter Wilhelmsen]
new NOT WORKING Software List entries
---
ekara_japan_a:a7 A-7 Pichi Pichi Pitch Pure Chapter 3 (Japan) [Peter Wilhelmsen, Sean Riddle]
ekara_japan_a:a5 A-5 Pichi Pichi Pitch Karaoke Party (Japan) [Peter Wilhelmsen, Sean Riddle]
ekara_japan_a:a4 A-4 Pichi Pichi Pitch Pure Chapter 1 (Japan) [Peter Wilhelmsen, Sean Riddle]
ekara_japan_a:a1 A-1 Pichi Pichi Pitch vol.1 (Japan) [Peter Wilhelmsen, Sean Riddle]
new NOT WORKING clones
---
Play 2000 (Super Slot & Gran Tesoro) (v7.0i) (Italy) [Peter Wilhelmsen, Morten Shearman Kirkegaard]
* new WORKING machines
---
Dragon Ball Z (JAKKS Pacific TV Game, Game-Key Ready) [Sean Riddle, 19 external donators]
* flag (nw)
* allow 'a7' to boot (nw)
* move XaviX2 sets to new files (nw)
* new machines marked as NOT WORKING
---
Let's TV Play Naruto [Peter Wilhelmsen, Sean Riddle]
This is another XaviX2 thing.
* new NOT WORKING machines
---
C2 Color [zhongtiao1]
35 in 1 Super Twins [Sean Riddle]
LeapPad [Sean Riddle]
My First LeapPad [Sean Riddle]
-leappad: Added software lists. [David Haywood]
-c2color: Added software lists. [David Haywood]
leappad note: Currently BIOS is not dumped for LeapPad, but some carts are, BIOS is dumped for My First LeapPad, but not carts. (nw)
c2color note: Again the internal ROM isn't dumped, but we need the placeholder driver for the software list hookup, 2 carts are dumped. (nw)
-vsmile: Added softlist loading for some of the trickier vsmile cases based on new dumps from Sean Riddle. Note, the Vsmile Motion game is 16MB so clearly needs some kind of banking. (nw)
----------------------------
V.Smile Baby (US) [Ryan Holtz]
New working clones
--------------------
V.Smile Baby (Sweden) [Ryan Holtz, Sean Ridde, Clawgrip]
-vsmileb: Split into a separate CPP file. Identified input codes and hooked up inputs. [Ryan Holtz, bmx]
* new NOT WORKING
----
Storio [Team Europe]
created this so that Clawgrip can add to it
* add seemingly pointless line to seemingly pointless file
* move info (nw)
* vtech (nw)
-vsmileb: Found enough port bits to show the VTech logo and V.Smile Baby intro. No game boots yet. [Ryan Holtz]
-spg2xx: Added separate logging for external interrupts and address mapping. [Ryan Holtz]
* new NOT WORKING --- Classic Arcade Pinball (JAKKS Pacific TV Game) [Sean Riddle, David Haywood]
* move to new driver instead (nw)
* minor note updates (nw)
* map inputs in matelcs (currently needs a hack to boot, so won't show anything yet) also removed a pointless bitswapping in a read function for some other stuff in the driver, and just correct the ports instead
* fix a typo (nw)
* note (nw)
* new NOT WORKING
---
Play TV Buckmasters Huntin' (NTSC) [Sean Riddle, Peter Wilhelmsen]
(gun needs mapping)
* new NOT WORKING
---
Track & Field Challenge [Sean Riddle, Clawgrip]
HELP! can't figure out what architecture this is, need to identify CPU type etc.
* rad_hnt digital controls (nw)
* more digital inputs (nw)
* change CPU type to G65816 based on feedback
* improve notes (nw)
- Add custom keyboard port and emulate most of the Expanded Typewriter Keyboard
- Add unidirectional printer port
- Use addressable latch devices to control various things, including disabling display during RAM test
- Hack to pass non-volatile memory test on uts10
AJR