# Translation of dolphin-emu.pot to LANGUAGE # Copyright (C) 2003-2013 # This file is distributed under the same license as the Dolphin Emulator package. # # Translators: # naruga <1419694599@qq.com>, 2019 # EmpyreusX , 2018 # Yueyu , 2014 # Kazushim , 2017 # Yueyu , 2015-2016 # Ryan Zhou , 2013-2020 # Yueyu , 2015 # thegfw , 2011 # Yueyu , 2014-2016 # Yueyu , 2013-2014 # zhenchao zhang , 2016 # Ryan Zhou , 2013 # 天绝星 , 2015-2024 # 陈 依云 , 2023-2024 msgid "" msgstr "" "Project-Id-Version: Dolphin Emulator\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2024-02-01 21:47+0100\n" "PO-Revision-Date: 2013-01-23 13:48+0000\n" "Last-Translator: 天绝星 , 2015-2024\n" "Language-Team: Chinese (China) (http://app.transifex.com/delroth/dolphin-emu/" "language/zh_CN/)\n" "Language: zh_CN\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" #: Source/Core/DiscIO/VolumeVerifier.cpp:1456 msgid "" "\n" "\n" "Because GameCube disc images contain little verification data, there may be " "problems that Dolphin is unable to detect." msgstr "" "\n" "\n" "由于 GameCube 光盘镜像包含很少的验证数据，因此可能存在 Dolphin 无法检测到的问" "题。" #: Source/Core/DiscIO/VolumeVerifier.cpp:1462 msgid "" "\n" "\n" "Because this title is not for retail Wii consoles, Dolphin cannot ensure " "that it hasn't been tampered with, even if signatures appear valid." msgstr "" "\n" "\n" "由于此游戏不适用于 Wii 零售版主机，Dolphin 无法确保其未被篡改，即使签名看起来" "有效。" #: Source/Core/DolphinQt/GameList/GameListModel.cpp:102 msgid " (Disc %1)" msgstr " (光盘 %1)" #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:283 msgid "! Not" msgstr "! 非" #: Source/Core/Core/Boot/Boot.cpp:261 msgid "\"{0}\" is an invalid GCM/ISO file, or is not a GC/Wii ISO." msgstr "“{0}” 不是一个有效的 GCM/ISO 文件，或者不是一个 GC/Wii 镜像。" #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:295 msgid "$ User Variable" msgstr "$ 用户变量 " #. i18n: The symbol for percent. #. i18n: The percent symbol. #. i18n: Percentage symbol. #. i18n: The percent symbol. #. i18n: The symbol/abbreviation for percent. #. i18n: The percent symbol. #: Source/Core/Core/HW/WiimoteEmu/Extension/Drums.cpp:71 #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.cpp:293 #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.cpp:299 #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:352 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/AnalogStick.cpp:105 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/ControlGroup.cpp:45 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/IMUCursor.cpp:46 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/MixedTriggers.cpp:28 msgid "%" msgstr "%" #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:286 msgid "% Modulo" msgstr "% 模除" #: Source/Core/DolphinQt/DiscordJoinRequestDialog.cpp:58 msgid "" "%1\n" "wants to join your party." msgstr "" "%1\n" "想参加你的派对。" #: Source/Core/DolphinQt/Settings/AudioPane.cpp:73 msgid "%1 %" msgstr "%1 %" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:322 #: Source/Core/DolphinQt/CheatSearchWidget.cpp:348 msgid "%1 %2" msgstr "%1 %2" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:331 msgid "%1 %2 %3" msgstr "%1 %2 %3" #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:81 #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:171 msgid "%1 (%2)" msgstr "%1 (%2)" #. i18n: If there is a pre-defined patch with the name %1 and the user wants to edit it, #. a copy of it gets created with this name #: Source/Core/DolphinQt/Config/PatchesWidget.cpp:121 msgid "%1 (Copy)" msgstr "%1 (复制)" #: Source/Core/DolphinQt/Config/InfoWidget.cpp:98 msgid "%1 (Disc %2, Revision %3)" msgstr "%1 (光盘 %2, 修订版 %3)" #: Source/Core/DolphinQt/Config/InfoWidget.cpp:102 msgid "%1 (Revision %3)" msgstr "%1 (修订版 %3)" #. i18n: "Stock" refers to input profiles included with Dolphin #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:511 msgid "%1 (Stock)" msgstr "%1 (库)" #. i18n: %1 is the name of a compression method (e.g. Zstandard) #: Source/Core/DolphinQt/ConvertDialog.cpp:233 msgid "%1 (recommended)" msgstr "%1 (推荐)" #. i18n: %1 is the name of a compression method (e.g. LZMA) #: Source/Core/DolphinQt/ConvertDialog.cpp:215 msgid "%1 (slow)" msgstr "%1 (慢)" #. i18n: This asterisk is added to the title of an editor to indicate that it has unsaved #. changes #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:714 msgid "%1 *" msgstr "%1 *" #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:313 msgid "" "%1 FIFO bytes\n" "%2 memory bytes\n" "%3 frames" msgstr "" "%1 FIFO 字节\n" "%2 存储字节\n" "%3 帧" #: Source/Core/DolphinQt/Config/Graphics/GraphicsWindow.cpp:73 msgid "%1 Graphics Configuration" msgstr "%1 图形配置" #: Source/Core/DolphinQt/Settings/AdvancedPane.cpp:300 msgid "%1 MB (MEM1)" msgstr "%1 MB (内存1)" #: Source/Core/DolphinQt/Settings/AdvancedPane.cpp:314 msgid "%1 MB (MEM2)" msgstr "%1 MB (内存2)" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:141 msgid "%1 doesn't support this feature on your system." msgstr "%1 在你的系统上不支持此特性。" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:296 msgid "%1 doesn't support this feature." msgstr "%1 不支持此特性。" #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:293 msgid "" "%1 frame(s)\n" "%2 object(s)\n" "Current Frame: %3" msgstr "" "%1 帧\n" "%2 对象\n" "当前帧: %3" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:912 msgid "%1 has joined" msgstr "%1 已加入" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:917 msgid "%1 has left" msgstr "%1 已离开" #: Source/Core/DolphinQt/Achievements/AchievementHeaderWidget.cpp:166 msgid "" "%1 has unlocked %2/%3 achievements (%4 hardcore) worth %5/%6 points (%7 " "hardcore)" msgstr "" "%1 已解锁 %2/%3 项成就 (包括 %4 项硬核成就) 折合 %5/%6 成就点数 (包括 %7 硬核" "点数)" #: Source/Core/DolphinQt/Achievements/AchievementHeaderWidget.cpp:177 msgid "%1 has unlocked %2/%3 achievements worth %4/%5 points" msgstr "%1 已解锁 %2/%3 项成就，折合 %4/%5 成就点数" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:1115 msgid "%1 is not a valid ROM" msgstr "%1 不是有效的 ROM" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:1039 msgid "%1 is now golfing" msgstr "%1 控制中" #: Source/Core/DolphinQt/Achievements/AchievementHeaderWidget.cpp:129 msgid "%1 is playing %2" msgstr "%1 正在玩 %2" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:115 msgid "%1 memory ranges" msgstr "%1 内存范围" #: Source/Core/DolphinQt/Settings/AudioPane.cpp:251 #: Source/Core/DolphinQt/Settings/AudioPane.cpp:320 msgid "%1 ms" msgstr "%1 毫秒" #: Source/Core/DolphinQt/Achievements/AchievementHeaderWidget.cpp:148 #: Source/Core/DolphinQt/Achievements/AchievementProgressWidget.cpp:93 msgid "%1 points" msgstr "%1 成就点数" #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:265 msgid "%1 session found" msgstr "已找到 %1 个会话" #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:265 msgid "%1 sessions found" msgstr "已找到 %1 个会话" #: Source/Core/DolphinQt/Settings/AudioPane.cpp:405 msgid "%1%" msgstr "%1%" #: Source/Core/DolphinQt/Settings/AdvancedPane.cpp:283 msgid "%1% (%2 MHz)" msgstr "%1% (%2 MHz)" #: Source/Core/DolphinQt/Settings/GeneralPane.cpp:177 msgid "%1% (Normal Speed)" msgstr "%1%（正常速度）" #. i18n: One of the options shown below "Run until (ignoring breakpoints)" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:637 msgid "%1's value is changed" msgstr "%1 的值已更改" #. i18n: One of the options shown below "Run until (ignoring breakpoints)" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:631 msgid "%1's value is hit" msgstr "%1 的值被命中" #. i18n: One of the options shown below "Run until (ignoring breakpoints)" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:634 msgid "%1's value is used" msgstr "%1 的值已使用" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:174 msgid "%1, %2, %3, %4" msgstr "%1, %2, %3, %4" #: Source/Core/DolphinQt/GCMemcardManager.cpp:606 msgid "%1: %2" msgstr "%1: %2" #: Source/Core/DolphinQt/NetPlay/GameDigestDialog.cpp:141 msgid "%1[%2]: %3" msgstr "%1[%2]: %3" #: Source/Core/DolphinQt/NetPlay/GameDigestDialog.cpp:129 msgid "%1[%2]: %3 %" msgstr "%1[%2]: %3 %" #: Source/Core/DolphinQt/NetPlay/ChunkedProgressDialog.cpp:135 msgid "%1[%2]: %3/%4 MiB" msgstr "%1[%2]: %3/%4 MiB" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:332 #, c-format msgid "%1x MSAA" msgstr "%1x MSAA" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:98 msgid "%1x Native (%2x%3)" msgstr "%1x 原生 (%2x%3)" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:103 msgid "%1x Native (%2x%3) for %4" msgstr "%1x 原生 (%2x%3) 适合 %4" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:344 #, c-format msgid "%1x SSAA" msgstr "%1x SSAA" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:327 #: Source/Core/DolphinQt/CheatSearchWidget.cpp:345 #, c-format msgctxt "" msgid "%n address(es) could not be accessed in emulated memory." msgstr "%n 个地址无法在模拟内存中访问。" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:318 #, c-format msgctxt "" msgid "%n address(es) remain." msgstr "%n 个地址保留。" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:317 #, c-format msgctxt "" msgid "%n address(es) were removed." msgstr "%n 个地址已移除。" #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:291 msgid "& And" msgstr "& 与" #: Source/Core/DolphinQt/GBAWidget.cpp:433 msgid "&1x" msgstr "&1x" #: Source/Core/DolphinQt/GBAWidget.cpp:435 msgid "&2x" msgstr "&2x" #: Source/Core/DolphinQt/GBAWidget.cpp:437 msgid "&3x" msgstr "&3x" #: Source/Core/DolphinQt/GBAWidget.cpp:439 msgid "&4x" msgstr "&4x" #: Source/Core/DolphinQt/MenuBar.cpp:626 msgid "&About" msgstr "关于(&A)" #: Source/Core/DolphinQt/Debugger/WatchWidget.cpp:360 msgid "&Add Memory Breakpoint" msgstr "添加内存断点(&A)" #: Source/Core/DolphinQt/Config/ARCodeWidget.cpp:63 #: Source/Core/DolphinQt/Config/GeckoCodeWidget.cpp:88 msgid "&Add New Code..." msgstr "添加新代码...(&A)" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:595 msgid "&Add function" msgstr "添加函数(&A)" #: Source/Core/DolphinQt/Config/PatchesWidget.cpp:48 msgid "&Add..." msgstr "添加...(&A)" #: Source/Core/DolphinQt/MenuBar.cpp:514 msgid "&Assembler" msgstr "汇编器(&A)" #: Source/Core/DolphinQt/MenuBar.cpp:559 msgid "&Audio Settings" msgstr "音频设置(&A)" #: Source/Core/DolphinQt/Settings/GeneralPane.cpp:197 msgid "&Auto Update:" msgstr "自动更新(&A):" #: Source/Core/DolphinQt/GBAWidget.cpp:442 msgid "&Borderless Window" msgstr "无边框窗口(&B)" #: Source/Core/DolphinQt/MenuBar.cpp:483 msgid "&Breakpoints" msgstr "断点(&B)" #: Source/Core/DolphinQt/MenuBar.cpp:609 msgid "&Bug Tracker" msgstr "错误跟踪器(&B)" #: Source/Core/DolphinQt/WiiUpdate.cpp:105 msgid "&Cancel" msgstr "取消(&C)" #: Source/Core/DolphinQt/MenuBar.cpp:233 msgid "&Cheats Manager" msgstr "金手指管理器(&C)" #: Source/Core/DolphinQt/MenuBar.cpp:619 msgid "&Check for Updates..." msgstr "检查更新...(&C)" #: Source/Core/DolphinQt/MenuBar.cpp:991 msgid "&Clear Symbols" msgstr "清除符号(&C)" #: Source/Core/DolphinQt/Config/PatchesWidget.cpp:191 msgid "&Clone..." msgstr "克隆...(&C)" #: Source/Core/DolphinQt/MenuBar.cpp:448 msgid "&Code" msgstr "代码(&C)" #: Source/Core/DolphinQt/GBAWidget.cpp:387 msgid "&Connected" msgstr "连接(&C)" #: Source/Core/DolphinQt/MenuBar.cpp:561 msgid "&Controller Settings" msgstr "控制器设置(&C)" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:571 msgid "&Copy address" msgstr "复制地址(&C)" #: Source/Core/DolphinQt/GCMemcardManager.cpp:137 msgid "&Create..." msgstr "创建...(&C)" #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:582 #: Source/Core/DolphinQt/GCMemcardManager.cpp:113 msgid "&Delete" msgstr "删除(&D)" #. i18n: This kind of "watch" is used for watching emulated memory. #. It's not related to timekeeping devices. #: Source/Core/DolphinQt/Debugger/WatchWidget.cpp:359 msgid "&Delete Watch" msgstr "删除监视(&D)" #. i18n: This kind of "watch" is used for watching emulated memory. #. It's not related to timekeeping devices. #: Source/Core/DolphinQt/Debugger/WatchWidget.cpp:338 msgid "&Delete Watches" msgstr "删除监视(&D)" #: Source/Core/DolphinQt/Config/ARCodeWidget.cpp:64 #: Source/Core/DolphinQt/Config/ARCodeWidget.cpp:191 #: Source/Core/DolphinQt/Config/GeckoCodeWidget.cpp:89 msgid "&Edit Code..." msgstr "编辑代码...(&E)" #: Source/Core/DolphinQt/Config/PatchesWidget.cpp:191 msgid "&Edit..." msgstr "编辑...(&E)" #: Source/Core/DolphinQt/MenuBar.cpp:213 msgid "&Eject Disc" msgstr "弹出光盘(&E)" #: Source/Core/DolphinQt/MenuBar.cpp:326 msgid "&Emulation" msgstr "模拟(&E)" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:257 msgid "&Export" msgstr "导出(&E)" #: Source/Core/DolphinQt/GBAWidget.cpp:414 msgid "&Export Save Game..." msgstr "导出游戏存档...(&E)" #: Source/Core/DolphinQt/GBAWidget.cpp:422 msgid "&Export State..." msgstr "导出状态...(&E)" #: Source/Core/DolphinQt/GCMemcardManager.cpp:117 msgid "&Export as .gci..." msgstr "导出为 .gci...(&E)" #: Source/Core/DolphinQt/MenuBar.cpp:203 msgid "&File" msgstr "文件(&F)" #: Source/Core/DolphinQt/MenuBar.cpp:581 msgid "&Font..." msgstr "字体...(&F)" #: Source/Core/DolphinQt/MenuBar.cpp:332 msgid "&Frame Advance" msgstr "逐帧播放(&F)" #: Source/Core/DolphinQt/MenuBar.cpp:563 msgid "&Free Look Settings" msgstr "自由视点设置(&F)" #: Source/Core/DolphinQt/MenuBar.cpp:993 msgid "&Generate Symbols From" msgstr "生成符号来自(&G)" #: Source/Core/DolphinQt/MenuBar.cpp:605 msgid "&GitHub Repository" msgstr "GitHub 资源库(&G)" #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:580 msgid "&Go to start of function" msgstr "转到函数起始位置(&G)" #: Source/Core/DolphinQt/MenuBar.cpp:558 msgid "&Graphics Settings" msgstr "图形设置(&G)" #: Source/Core/DolphinQt/MenuBar.cpp:596 msgid "&Help" msgstr "帮助(&H)" #: Source/Core/DolphinQt/MenuBar.cpp:562 msgid "&Hotkey Settings" msgstr "热键设置(&H)" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:252 msgid "&Import" msgstr "导入(&I)" #: Source/Core/DolphinQt/GBAWidget.cpp:411 msgid "&Import Save Game..." msgstr "导入游戏存档...(&I)" #: Source/Core/DolphinQt/GBAWidget.cpp:419 msgid "&Import State..." msgstr "导入状态...(&I)" #: Source/Core/DolphinQt/GCMemcardManager.cpp:127 msgid "&Import..." msgstr "导入...(&I)" #: Source/Core/DolphinQt/MenuBar.cpp:239 msgid "&Infinity Base" msgstr "Infinity 底座(&I)" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:597 msgid "&Insert blr" msgstr "插入 blr (&I)" #: Source/Core/DolphinQt/GBAWidget.cpp:452 msgid "&Interframe Blending" msgstr "帧间混合(&I)" #: Source/Core/DolphinQt/MenuBar.cpp:508 msgid "&JIT" msgstr "即时编译器(&J)" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:119 msgid "&Language:" msgstr "语言(&L):" #: Source/Core/DolphinQt/MenuBar.cpp:349 msgid "&Load State" msgstr "载入状态(&L)" #: Source/Core/DolphinQt/MenuBar.cpp:999 msgid "&Load Symbol Map" msgstr "载入符号映射(&L)" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:253 msgid "&Load file to current address" msgstr "将文件加载到当前地址(&L)" #. i18n: This kind of "watch" is used for watching emulated memory. #. It's not related to timekeeping devices. #: Source/Core/DolphinQt/Debugger/WatchWidget.cpp:341 msgid "&Lock Watches" msgstr "锁定监视(&L)" #: Source/Core/DolphinQt/MenuBar.cpp:440 msgid "&Lock Widgets In Place" msgstr "锁定部件位置(&L)" #: Source/Core/DolphinQt/MenuBar.cpp:492 msgid "&Memory" msgstr "内存(&M)" #: Source/Core/DolphinQt/MenuBar.cpp:755 msgid "&Movie" msgstr "影片(&M)" #: Source/Core/DolphinQt/GBAWidget.cpp:425 msgid "&Mute" msgstr "静音(&M)" #: Source/Core/DolphinQt/MenuBar.cpp:500 msgid "&Network" msgstr "网络(&N)" #: qtbase/src/gui/kernel/qplatformtheme.cpp:720 msgid "&No" msgstr "否(&N)" #: Source/Core/DolphinQt/GCMemcardManager.cpp:136 #: Source/Core/DolphinQt/MenuBar.cpp:205 Source/Core/DolphinQt/MenuBar.cpp:207 msgid "&Open..." msgstr "打开...(&O)" #: Source/Core/DolphinQt/MenuBar.cpp:549 msgid "&Options" msgstr "选项(&O)" #: Source/Core/DolphinQt/MenuBar.cpp:1019 msgid "&Patch HLE Functions" msgstr "修补 HLE 功能函数(&P)" #: Source/Core/DolphinQt/MenuBar.cpp:328 msgid "&Pause" msgstr "暂停游戏(&P)" #: Source/Core/DolphinQt/MenuBar.cpp:327 msgid "&Play" msgstr "开始游戏(&P)" #: Source/Core/DolphinQt/GameList/GameList.cpp:401 msgid "&Properties" msgstr "属性(&P)" #: Source/Core/DolphinQt/MenuBar.cpp:770 msgid "&Read-Only Mode" msgstr "只读模式(&R)" #: Source/Core/DolphinQt/Config/GraphicsModListWidget.cpp:67 msgid "&Refresh List" msgstr "刷新列表(&R)" #: Source/Core/DolphinQt/MenuBar.cpp:456 msgid "&Registers" msgstr "寄存器(&R)" #: Source/Core/DolphinQt/Config/PatchesWidget.cpp:50 msgid "&Remove" msgstr "移除(&R)" #: Source/Core/DolphinQt/Config/ARCodeWidget.cpp:65 #: Source/Core/DolphinQt/Config/GeckoCodeWidget.cpp:90 msgid "&Remove Code" msgstr "移除代码(&R)" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:586 msgid "&Rename symbol" msgstr "重命名符号(&R)" #: Source/Core/DolphinQt/GBAWidget.cpp:405 #: Source/Core/DolphinQt/MenuBar.cpp:330 msgid "&Reset" msgstr "重置游戏(&R)" #: Source/Core/DolphinQt/MenuBar.cpp:230 msgid "&Resource Pack Manager" msgstr "资源包管理器(&R)" #: Source/Core/DolphinQt/MenuBar.cpp:1000 msgid "&Save Symbol Map" msgstr "保存符号映射(&S)" #: Source/Core/DolphinQt/GBAWidget.cpp:401 msgid "&Scan e-Reader Card(s)..." msgstr "扫描 e-Reader 卡...(&S)" #: Source/Core/DolphinQt/MenuBar.cpp:238 msgid "&Skylanders Portal" msgstr "Skylanders 传送门(&S)" #: Source/Core/DolphinQt/Settings/GeneralPane.cpp:182 msgid "&Speed Limit:" msgstr "速度限制(&S):" #: Source/Core/DolphinQt/MenuBar.cpp:329 msgid "&Stop" msgstr "停止游戏(&S)" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:123 msgid "&Theme:" msgstr "主题(&T):" #: Source/Core/DolphinQt/MenuBar.cpp:465 msgid "&Threads" msgstr "线程(&T)" #: Source/Core/DolphinQt/MenuBar.cpp:228 msgid "&Tools" msgstr "工具(&T)" #: Source/Core/DolphinQt/GBAWidget.cpp:397 msgid "&Unload ROM" msgstr "卸载 ROM (&U)" #. i18n: This kind of "watch" is used for watching emulated memory. #. It's not related to timekeeping devices. #: Source/Core/DolphinQt/Debugger/WatchWidget.cpp:344 msgid "&Unlock Watches" msgstr "解锁监视(&U)" #: Source/Core/DolphinQt/MenuBar.cpp:414 msgid "&View" msgstr "视图(&V)" #. i18n: This kind of "watch" is used for watching emulated memory. #. It's not related to timekeeping devices. #: Source/Core/DolphinQt/MenuBar.cpp:475 msgid "&Watch" msgstr "监视(&W)" #: Source/Core/DolphinQt/MenuBar.cpp:598 msgid "&Website" msgstr "网站(&W)" #: Source/Core/DolphinQt/GameList/GameList.cpp:404 msgid "&Wiki" msgstr "百科(&W)" #: qtbase/src/gui/kernel/qplatformtheme.cpp:716 msgid "&Yes" msgstr "是(&Y)" #: Source/Core/DolphinQt/MenuBar.cpp:1302 msgid "'%1' not found, no symbol names generated" msgstr "找不到 '%1'，未生成符号名" #: Source/Core/DolphinQt/MenuBar.cpp:1524 msgid "'%1' not found, scanning for common functions instead" msgstr "找不到 '%1'，改为扫描常用函数" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:146 msgid "(Dark)" msgstr "(深色)" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:145 msgid "(Light)" msgstr "(浅色)" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:141 msgid "(System)" msgstr "(系统)" #: Source/Core/DolphinQt/Debugger/JITWidget.cpp:142 msgid "(host)" msgstr "(主机)" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:270 msgid "(off)" msgstr "(关)" #: Source/Core/DolphinQt/Debugger/JITWidget.cpp:141 msgid "(ppc)" msgstr "(ppc)" #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:284 msgid "* Multiply" msgstr "* 乘" #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:287 msgid "+ Add" msgstr "+ 加" #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:298 msgid ", Comma" msgstr ", 逗号" #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:288 msgid "- Subtract" msgstr "- 减" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:375 msgid "--> %1" msgstr "--> %1" #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:217 msgid "--Unknown--" msgstr "--未知--" #: Source/Core/DolphinQt/Config/Mapping/MappingWidget.cpp:323 #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:716 #: Source/Core/DolphinQt/RiivolutionBootWidget.cpp:185 #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:102 msgid "..." msgstr "..." #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:285 msgid "/ Divide" msgstr "/ 除" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:590 #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:591 msgid "0" msgstr "0" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:80 msgid "1 GiB" msgstr "1 GiB" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:77 msgid "1080p" msgstr "1080p" #: Source/Core/DolphinQt/GCMemcardCreateNewDialog.cpp:31 msgid "128 Mbit (2043 blocks)" msgstr "128 Mbit (2043 区块)" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:77 msgid "128 MiB" msgstr "128 MiB" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:77 msgid "1440p" msgstr "1440p" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:209 msgid "16 Bytes" msgstr "16 字节" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:84 msgid "16 GiB (SDHC)" msgstr "16 GiB (SDHC)" #: Source/Core/DolphinQt/GCMemcardCreateNewDialog.cpp:28 msgid "16 Mbit (251 blocks)" msgstr "16 Mbit (251 区块)" #: Source/Core/DolphinQt/Config/NewPatchDialog.cpp:132 msgid "16-bit" msgstr "16位" #: Source/Core/DolphinQt/CheatSearchFactoryWidget.cpp:103 #: Source/Core/DolphinQt/CheatSearchWidget.cpp:155 msgid "16-bit Signed Integer" msgstr "16 位有符号整数" #: Source/Core/DolphinQt/CheatSearchFactoryWidget.cpp:95 #: Source/Core/DolphinQt/CheatSearchWidget.cpp:143 msgid "16-bit Unsigned Integer" msgstr "16 位无符号整数" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:164 msgid "16:9" msgstr "16:9" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:117 msgid "16x Anisotropic" msgstr "16x 各向异性" #: Source/Core/Core/HotkeyManager.cpp:193 msgid "1x" msgstr "1x" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:81 msgid "2 GiB" msgstr "2 GiB" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:78 msgid "256 MiB" msgstr "256 MiB" #: Source/Core/Core/HotkeyManager.cpp:194 msgid "2x" msgstr "2x" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:114 msgid "2x Anisotropic" msgstr "2x 各向异性" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:85 msgid "32 GiB (SDHC)" msgstr "32 GiB (SDHC)" #: Source/Core/DolphinQt/GCMemcardCreateNewDialog.cpp:29 msgid "32 Mbit (507 blocks)" msgstr "32 Mbit (507 区块)" #: Source/Core/DolphinQt/Config/NewPatchDialog.cpp:133 msgid "32-bit" msgstr "32位" #: Source/Core/DolphinQt/CheatSearchFactoryWidget.cpp:109 #: Source/Core/DolphinQt/CheatSearchWidget.cpp:164 msgid "32-bit Float" msgstr "32 位浮点数" #: Source/Core/DolphinQt/CheatSearchFactoryWidget.cpp:105 #: Source/Core/DolphinQt/CheatSearchWidget.cpp:158 msgid "32-bit Signed Integer" msgstr "32 位有符号整数" #: Source/Core/DolphinQt/CheatSearchFactoryWidget.cpp:97 #: Source/Core/DolphinQt/CheatSearchWidget.cpp:146 msgid "32-bit Unsigned Integer" msgstr "32 位无符号整数" #. i18n: Stereoscopic 3D #: Source/Core/Core/HotkeyManager.cpp:350 #: Source/Core/DolphinQt/Config/Mapping/Hotkey3D.cpp:22 #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:458 msgid "3D" msgstr "3D" #. i18n: Stereoscopic 3D #: Source/Core/Core/HotkeyManager.cpp:352 #: Source/Core/DolphinQt/Config/Mapping/Hotkey3D.cpp:25 msgid "3D Depth" msgstr "3D 深度" #: Source/Core/Core/HotkeyManager.cpp:195 msgid "3x" msgstr "3x" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:207 msgid "4 Bytes" msgstr "4 字节" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:82 msgid "4 GiB (SDHC)" msgstr "4 GiB (SDHC)" #: Source/Core/DolphinQt/GCMemcardCreateNewDialog.cpp:26 msgid "4 Mbit (59 blocks)" msgstr "4 Mbit (59 区块)" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:163 msgid "4:3" msgstr "4:3" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:78 msgid "4K" msgstr "4K" #: Source/Core/Core/HotkeyManager.cpp:196 msgid "4x" msgstr "4x" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:115 msgid "4x Anisotropic" msgstr "4x 各向异性" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:79 msgid "512 MiB" msgstr "512 MiB" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:78 msgid "5K" msgstr "5K" #: Source/Core/DolphinQt/GCMemcardCreateNewDialog.cpp:30 msgid "64 Mbit (1019 blocks)" msgstr "64 Mbit (1019 区块)" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:76 msgid "64 MiB" msgstr "64 MiB" #: Source/Core/DolphinQt/CheatSearchFactoryWidget.cpp:110 #: Source/Core/DolphinQt/CheatSearchWidget.cpp:167 msgid "64-bit Float" msgstr "64 位浮点数" #: Source/Core/DolphinQt/CheatSearchFactoryWidget.cpp:107 #: Source/Core/DolphinQt/CheatSearchWidget.cpp:161 msgid "64-bit Signed Integer" msgstr "64 位有符号整数" #: Source/Core/DolphinQt/CheatSearchFactoryWidget.cpp:99 #: Source/Core/DolphinQt/CheatSearchWidget.cpp:149 msgid "64-bit Unsigned Integer" msgstr "64 位无符号整数" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:77 msgid "720p" msgstr "720p" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:208 msgid "8 Bytes" msgstr "8 字节" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:83 msgid "8 GiB (SDHC)" msgstr "8 GiB (SDHC)" #: Source/Core/DolphinQt/GCMemcardCreateNewDialog.cpp:27 msgid "8 Mbit (123 blocks)" msgstr "8 Mbit (123 区块)" #: Source/Core/DolphinQt/Config/NewPatchDialog.cpp:131 msgid "8-bit" msgstr "8位" #: Source/Core/DolphinQt/CheatSearchFactoryWidget.cpp:101 #: Source/Core/DolphinQt/CheatSearchWidget.cpp:152 msgid "8-bit Signed Integer" msgstr "8 位有符号整数" #: Source/Core/DolphinQt/CheatSearchFactoryWidget.cpp:93 #: Source/Core/DolphinQt/CheatSearchWidget.cpp:140 msgid "8-bit Unsigned Integer" msgstr "8 位无符号整数" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:79 msgid "8K" msgstr "8K" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:116 msgid "8x Anisotropic" msgstr "8x 各向异性" #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:290 msgid "< Less-than" msgstr "< 小于" #: Source/Core/Core/HW/EXI/EXI_Device.h:131 msgid "" msgstr "" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:72 msgid "" msgstr "<系统语言>" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:264 msgid "Disabled in Hardcore Mode." msgstr "在硬核模式下禁用。" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:411 msgid "If unsure, leave this unchecked." msgstr "如无法确定，请不要选中此项。" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:705 #: Source/Core/DolphinQt/Debugger/RegisterWidget.cpp:294 msgid "" "AutoStepping timed out. Current instruction is " "irrelevant." msgstr "自动步进超时。当前指令与其不相关。" #: Source/Core/DolphinQt/Updater.cpp:64 msgid "" "

A new version of Dolphin is available!

Dolphin %1 is available for " "download. You are running %2.
Would you like to update?

Release " "Notes:

" msgstr "" "

有新版的 Dolphin 可用

现在可以下载 Dolphin %1。你正在运行 %2。
是" "否更新？

发布说明：

" #: Source/Core/DolphinQt/Debugger/AssembleInstructionDialog.cpp:20 #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:51 msgid "" "Error on line %1 col %2" msgstr "" "错误第 %1 行第 %2 列" #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:528 msgid "" "Warning invalid base address, " "defaulting to 0" msgstr "警告无效的基地址，默认为 0" #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:289 msgid "> Greater-than" msgstr "> 大于" #: Source/Core/DolphinQt/MainWindow.cpp:1542 #: Source/Core/DolphinQt/MainWindow.cpp:1609 msgid "A NetPlay Session is already in progress!" msgstr "已经有一个联机会话正在进行！" #: Source/Core/Core/WiiUtils.cpp:172 msgid "" "A different version of this title is already installed on the NAND.\n" "\n" "Installed version: {0}\n" "WAD version: {1}\n" "\n" "Installing this WAD will replace it irreversibly. Continue?" msgstr "" "NAND 上已经安装了该游戏的不同版本。\n" "\n" "已安装版本：{0}\n" "WAD 版本：{1}\n" "\n" "安装此 WAD 替换是不可逆转的。是否继续？" #: Source/Core/Core/HW/DVD/DVDInterface.cpp:470 msgid "A disc is already about to be inserted." msgstr "光盘已可插入。" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:547 msgid "" "A group of features to make the colors more accurate, matching the color " "space Wii and GC games were meant for." msgstr "一些使颜色更准确的功能，使其与 Wii 和 GC 游戏的色彩空间相匹配。" #: Source/Core/DolphinQt/Main.cpp:228 msgid "A save state cannot be loaded without specifying a game to launch." msgstr "载入保存状态必须指定要启动的游戏" #: Source/Core/DolphinQt/MainWindow.cpp:952 msgid "" "A shutdown is already in progress. Unsaved data may be lost if you stop the " "current emulation before it completes. Force stop?" msgstr "" "关闭命令已在进行中。如果在程序完成前停止当前模拟则未保存的数据会丢失。强制停" "止？" #: Source/Core/DolphinQt/Config/WiimoteControllersWidget.cpp:161 msgid "" "A supported Bluetooth device could not be found.\n" "You must manually connect your Wii Remote." msgstr "" "未能找到支持的蓝牙设备。\n" "你需要手动连接 Wii 遥控器。" #: Source/Core/DolphinQt/Config/WiimoteControllersWidget.cpp:234 msgid "A sync can only be triggered when a Wii game is running." msgstr "只有在 Wii 游戏运行时同步才能触发。" #. i18n: A mysterious debugging/diagnostics peripheral for the GameCube. #: Source/Core/Core/HW/EXI/EXI_Device.h:98 msgid "AD16" msgstr "AD16" #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:114 msgid "" "ALERT:\n" "\n" "All players must use the same Dolphin version.\n" "If enabled, SD cards must be identical between players.\n" "If DSP LLE is used, DSP ROMs must be identical between players.\n" "If a game is hanging on boot, it may not support Dual Core Netplay. Disable " "Dual Core.\n" "If connecting directly, the host must have the chosen UDP port open/" "forwarded!\n" "\n" "Wii Remote support in netplay is experimental and may not work correctly.\n" "Use at your own risk.\n" msgstr "" "警告:\n" "\n" "所有玩家都必须使用相同的 Dolphin 版本。\n" "所有玩家的 SD 卡必须一致或禁用。\n" "如果使用 DSP LLE，所有玩家的 DSP ROM 必须相同。\n" "如果游戏在启动时卡死，可能是不支持双核联机，禁用双核即可。\n" "如果使用直连，主机必须将所选的 UDP 端口打开/转发！\n" "\n" "Wii 遥控器的联机还在实验阶段，可能不会正常工作。\n" "使用需自担风险。\n" #: Source/Core/DolphinQt/CheatsManager.cpp:138 #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:410 msgid "AR Code" msgstr "AR 代码" #: Source/Core/DolphinQt/Config/PropertiesDialog.cpp:71 msgid "AR Codes" msgstr "AR 代码" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:137 #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:197 msgid "ASCII" msgstr "ASCII" #: Source/Core/DolphinQt/ConvertDialog.cpp:434 #: qtbase/src/gui/kernel/qplatformtheme.cpp:724 msgid "Abort" msgstr "终止" #: Source/Core/DolphinQt/AboutDialog.cpp:17 msgid "About Dolphin" msgstr "关于 Dolphin" #: Source/Core/Core/HW/WiimoteEmu/Extension/Nunchuk.cpp:62 #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.cpp:254 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtensionMotionInput.cpp:51 msgid "Accelerometer" msgstr "加速度计" #. i18n: Percentage value of accelerometer data (complementary filter coefficient). #: Source/Core/InputCommon/ControllerEmu/ControlGroup/IMUCursor.cpp:44 msgid "Accelerometer Influence" msgstr "加速度器影响" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:78 msgid "Accuracy:" msgstr "精确度：" #: Source/Core/DolphinQt/Config/HardcoreWarningWidget.cpp:39 msgid "Achievement Settings" msgstr "成就设置" #: Source/Core/DolphinQt/Achievements/AchievementsWindow.cpp:25 #: Source/Core/DolphinQt/MenuBar.cpp:252 msgid "Achievements" msgstr "成就" #: Source/Core/DolphinQt/Achievements/AchievementHeaderWidget.cpp:31 msgid "" "Achievements have been disabled.
Please close all running games to re-" "enable achievements." msgstr "成就功能已被禁用。
请关闭所有运行的游戏以重新启用成就功能。" #: Source/Core/DolphinQt/Debugger/BreakpointDialog.cpp:172 msgid "Action" msgstr "操作" #: Source/Core/Core/ARDecrypt.cpp:474 msgid "" "Action Replay Code Decryption Error:\n" "Parity Check Failed\n" "\n" "Culprit Code:\n" "{0}" msgstr "" "Action Replay 代码解密错误:\n" "奇偶校验失败\n" "\n" "错误代码:\n" "{0}" #: Source/Core/Core/ActionReplay.cpp:536 msgid "" "Action Replay Error: Invalid size ({0:08x} : address = {1:08x}) in Add Code " "({2})" msgstr "" "Action Replay 错误: 无效大小 ({0:08x} : 地址 = {1:08x}) 于 添加代码 ({2})" #: Source/Core/Core/ActionReplay.cpp:628 msgid "" "Action Replay Error: Invalid size ({0:08x} : address = {1:08x}) in Fill and " "Slide ({2})" msgstr "" "Action Replay 错误: 无效大小 ({0:08x} : 地址 = {1:08x}) 于 填充和滑动 ({2})" #: Source/Core/Core/ActionReplay.cpp:409 msgid "" "Action Replay Error: Invalid size ({0:08x} : address = {1:08x}) in Ram Write " "And Fill ({2})" msgstr "" "Action Replay 错误: 无效大小 ({0:08x} : 地址 = {1:08x}) 于 内存写入和填充 " "({2})" #: Source/Core/Core/ActionReplay.cpp:470 msgid "" "Action Replay Error: Invalid size ({0:08x} : address = {1:08x}) in Write To " "Pointer ({2})" msgstr "" "Action Replay 错误: 无效大小 ({0:08x} : 地址 = {1:08x}) 于 写入到指针 ({2})" #: Source/Core/Core/ActionReplay.cpp:687 msgid "Action Replay Error: Invalid value ({0:08x}) in Memory Copy ({1})" msgstr "Action Replay 错误: 无效数值 ({0:08x}) 于 内存复制 ({1})" #: Source/Core/Core/ActionReplay.cpp:551 msgid "" "Action Replay Error: Master Code and Write To CCXXXXXX not implemented " "({0})\n" "Master codes are not needed. Do not use master codes." msgstr "" "Action Replay 错误: 主代码与写入到 CCXXXXXX 尚未实现 ({0})\n" "不需要主代码。请不要使用主代码。" #: Source/Core/Core/ActionReplay.cpp:225 msgid "Action Replay Error: invalid AR code line: {0}" msgstr "Action Replay 错误: 无效 AR 代码行: {0}" #: Source/Core/Core/ActionReplay.cpp:799 msgid "Action Replay: Conditional Code: Invalid Size {0:08x} ({1})" msgstr "Action Replay: 条件代码: 无效大小 {0:08x} ({1})" #: Source/Core/Core/ActionReplay.cpp:766 msgid "Action Replay: Invalid Normal Code Type {0:08x} ({1})" msgstr "Action Replay: 无效正常代码类型 {0:08x} ({1})" #: Source/Core/Core/ActionReplay.cpp:724 msgid "Action Replay: Normal Code 0: Invalid Subtype {0:08x} ({1})" msgstr "Action Replay: 正常代码 0: 无效子类型 {0:08x} ({1})" #: Source/Core/Core/ActionReplay.cpp:823 msgid "Action Replay: Normal Code {0}: Invalid subtype {1:08x} ({2})" msgstr "Action Replay: 正常代码 {0}: 无效子类型 {1:08x} ({2})" #: Source/Core/Core/HotkeyManager.cpp:39 msgid "Activate NetPlay Chat" msgstr "激活联机聊天" #: Source/Core/DolphinQt/Debugger/BreakpointWidget.cpp:167 msgid "Active" msgstr "激活" #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:75 msgid "Active Infinity Figures:" msgstr "正在使用的 Infinity 角色：" #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:161 msgid "Active thread queue" msgstr "活动线程队列" #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:176 msgid "Active threads" msgstr "活动线程" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:302 msgid "Adapter" msgstr "适配器" #: Source/Core/DolphinQt/Config/Mapping/GCPadWiiUConfigDialog.cpp:71 msgid "Adapter Detected" msgstr "检测到适配器" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:87 msgid "Adapter:" msgstr "适配器：" #: Source/Core/DolphinQt/Config/ControllerInterface/DualShockUDPClientAddServerDialog.cpp:56 #: Source/Core/DolphinQt/Config/NewPatchDialog.cpp:74 #: Source/Core/DolphinQt/Settings/USBDeviceAddToWhitelistDialog.cpp:49 msgid "Add" msgstr "添加" #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:122 msgid "Add &breakpoint" msgstr "添加断点(&B)" #: Source/Core/DolphinQt/Config/ControllerInterface/DualShockUDPClientAddServerDialog.cpp:31 msgid "Add New DSU Server" msgstr "添加新的 DSU 服务器" #: Source/Core/DolphinQt/Settings/USBDeviceAddToWhitelistDialog.cpp:45 msgid "Add New USB Device" msgstr "添加新的 USB 设备" #: Source/Core/DolphinQt/GameList/GameList.cpp:491 #: Source/Core/DolphinQt/GameList/GameList.cpp:494 msgid "Add Shortcut to Desktop" msgstr "添加快捷方式到桌面" #: Source/Core/Core/HotkeyManager.cpp:77 msgid "Add a Breakpoint" msgstr "添加一个断点" #: Source/Core/Core/HotkeyManager.cpp:78 msgid "Add a Memory Breakpoint" msgstr "添加内存断点" #: Source/Core/DolphinQt/Debugger/RegisterWidget.cpp:137 msgid "Add memory &breakpoint" msgstr "添加内存断点(&B)" #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:123 msgid "Add memory breakpoint" msgstr "添加内存断点" #. i18n: This kind of "watch" is used for watching emulated memory. #. It's not related to timekeeping devices. #: Source/Core/DolphinQt/Debugger/RegisterWidget.cpp:132 #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:125 msgid "Add to &watch" msgstr "添加到监视(&W)" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:501 #: Source/Core/DolphinQt/Debugger/MemoryViewWidget.cpp:901 msgid "Add to watch" msgstr "添加到监视" #: Source/Core/DolphinQt/Config/ControllerInterface/DualShockUDPClientWidget.cpp:37 #: Source/Core/DolphinQt/Settings/PathPane.cpp:141 #: Source/Core/DolphinQt/Settings/WiiPane.cpp:327 msgid "Add..." msgstr "添加..." #: Source/Core/DolphinQt/CheatSearchWidget.cpp:590 #: Source/Core/DolphinQt/Debugger/BreakpointDialog.cpp:123 #: Source/Core/DolphinQt/Debugger/BreakpointDialog.cpp:288 #: Source/Core/DolphinQt/Debugger/BreakpointDialog.cpp:300 #: Source/Core/DolphinQt/Debugger/BreakpointWidget.cpp:167 #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:90 #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:264 #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:498 #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:156 #: Source/Core/DolphinQt/Debugger/JITWidget.cpp:82 #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:181 #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:233 #: Source/Core/DolphinQt/Debugger/WatchWidget.cpp:91 #: Source/Core/DolphinQt/MenuBar.cpp:994 msgid "Address" msgstr "地址" #: Source/Core/DolphinQt/CheatSearchFactoryWidget.cpp:44 #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:162 msgid "Address Space" msgstr "地址空间" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:123 msgid "Address space by CPU state" msgstr "按 CPU 状态划分的地址空间" #: Source/Core/DolphinQt/Config/NewPatchDialog.cpp:155 #: Source/Core/DolphinQt/Debugger/BreakpointDialog.cpp:108 #: Source/Core/DolphinQt/Debugger/BreakpointDialog.cpp:249 msgid "Address:" msgstr "地址：" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:509 msgid "" "Adjust the texture filtering. Anisotropic filtering enhances the visual " "quality of textures that are at oblique viewing angles. Force Nearest and " "Force Linear override the texture scaling filter selected by the game." "

Any option except 'Default' will alter the look of the game's " "textures and might cause issues in a small number of games.

This " "option is incompatible with Manual Texture Sampling." "

If unsure, select 'Default'." msgstr "" "调整纹理过滤。各向异性过滤增强了倾斜视角下纹理的视觉质量。强制邻近和强制线性" "会覆盖游戏自身选定的纹理缩放滤镜。

除“默认”之外的任何选项都会改变游戏" "纹理的外观，并可能导致少数游戏出现问题。

此选项与手动纹理采样不兼容。" "

如无法确定，请选择“默认”。" #. i18n: Refers to plastic shell of game controller (stick gate) that limits stick movements. #: Source/Core/InputCommon/ControllerEmu/ControlGroup/AnalogStick.cpp:107 msgid "Adjusts target radius of simulated stick gate." msgstr "调整模拟摇杆洞口的目标半径。" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:246 msgid "" "Adjusts the accuracy at which the GPU receives texture updates from RAM." "

The \"Safe\" setting eliminates the likelihood of the GPU missing " "texture updates from RAM. Lower accuracies cause in-game text to appear " "garbled in certain games.

If unsure, select the " "rightmost value." msgstr "" "调整 GPU 接收内存中的纹理更新的精确度。

选择“安全”能防止 GPU 错过内存" "中纹理更新。较低的精确度将导致一些游戏中文字出现错乱。" "

如无法确定，请将滑块拖动至最右端。" #: Source/Core/DolphinQt/Settings/AdvancedPane.cpp:151 msgid "" "Adjusts the amount of RAM in the emulated console.\n" "\n" "WARNING: Enabling this will completely break many games. Only a small number " "of games can benefit from this." msgstr "" "调整模拟主机的内存大小。\n" "\n" "警告：启用此功能会使很多游戏彻底奔溃。只有少数游戏可以从中受益。" #: Source/Core/DolphinQt/Settings/AdvancedPane.cpp:110 msgid "" "Adjusts the emulated CPU's clock rate.\n" "\n" "Higher values may make variable-framerate games run at a higher framerate, " "at the expense of performance. Lower values may activate a game's internal " "frameskip, potentially improving performance.\n" "\n" "WARNING: Changing this from the default (100%) can and will break games and " "cause glitches. Do so at your own risk. Please do not report bugs that occur " "with a non-default clock." msgstr "" "调整模拟 CPU 的时钟频率。\n" "\n" "较高的数值也许会使可变帧率游戏运行在更高的帧数，但会增加性能负载。\n" "较低的数值可能会激活游戏的内部跳帧，或许可潜在性的提升性能。\n" "\n" "警告：改动默认值 (100%) 可能会破坏游戏而导致故障。\n" "如要这样做风险自负。请不要提交非默认时钟频率下出现的错误。" #: Source/Core/Core/HW/EXI/EXI_Device.h:104 msgid "Advance Game Port" msgstr "GBA 游戏端口" #: Source/Core/DolphinQt/Config/Graphics/GraphicsWindow.cpp:63 #: Source/Core/DolphinQt/Config/Mapping/MappingWidget.cpp:160 #: Source/Core/DolphinQt/Config/SettingsWindow.cpp:43 msgid "Advanced" msgstr "高级" #: Source/Core/DolphinQt/Config/Mapping/MappingWidget.cpp:233 msgid "Advanced Settings" msgstr "高级设置" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:516 msgid "" "Affects how the game output is scaled to the window resolution.
The " "performance mostly depends on the number of samples each method uses." "
Compared to SSAA, resampling is useful in case the output " "window
resolution isn't a multiplier of the native emulation resolution." "

Default - [fastest]
Internal GPU bilinear sampler which is " "not gamma corrected.
This setting might be ignored if gamma correction is " "forced on.

Bilinear - [4 samples]
Gamma corrected linear " "interpolation between pixels.

Bicubic - [16 samples]
Gamma " "corrected cubic interpolation between pixels.
Good when rescaling between " "close resolutions. i.e 1080p and 1440p.
Comes in various flavors:
B-" "Spline: Blurry, but avoids all lobing artifacts
Mitchell-" "Netravali: Good middle ground between blurry and lobing
Catmull-" "Rom: Sharper, but can cause lobing artifacts

Sharp Bilinear - [1-4 samples]
Similarly to \"Nearest Neighbor\", it maintains a " "sharp look,
but also does some blending to avoid shimmering.
Works " "best with 2D games at low resolutions.

Area Sampling - [up to " "324 samples]
Weights pixels by the percentage of area they occupy. Gamma " "corrected.
Best for down scaling by more than 2x." "

If unsure, select 'Default'." msgstr "" "影响游戏画面缩放到窗口分辨率的方式。
性能主要取决于每个方式使用的样本数。" "
与 SSAA 相比，如果输出窗口
分辨率不是模拟分辨率的倍数，重采样将非常有" "用。

默认 - [最快]
使用未进行伽玛校正的 GPU 内部双线性采样" "器。
如果强制启用伽玛校正，则可能忽略此设置。

双线性 - [4 样" "本数]
经过伽玛校正后像素间的线性插值。

双三次插值 - [16 样本" "数]
经过伽玛校正后像素间的三次插值。
在接近目的分辨率时缩放效果良好。" "如 1080p 和 1440p。
其他方式：
B样条曲线：模糊，但能避免伪影" "
Mitchell-Netravali 过滤：在模糊与伪影间取得良好平衡
Catmull-" "Rom 插值：画面更锐利，但可能导致伪影

锐利双线性 - [1-4 样本" "数]
与近邻取样类似，保持清晰锐利的画面，
但进行了一些混合以避免闪烁。" "
适用于低分辨率下的 2D 游戏。

区域取样 - [最高 324 样本" "数]
按像素所占面积的百分比对像素进行加权。经伽玛校正。
适用于缩放倍数" "在 2 倍以上的场合。

如无法确定，请选择“默认”。" #: Source/Core/UICommon/NetPlayIndex.cpp:251 msgid "Africa" msgstr "非洲" #. i18n: One of the elements in the Skylanders games. Japanese: 風. For official translations #. in other languages, check the SuperChargers manual at https://support.activision.com/manuals #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:358 msgid "Air" msgstr "风" #: Source/Core/DolphinQt/CheatSearchFactoryWidget.cpp:115 msgid "Aligned to data type length" msgstr "与数据类型长度对齐" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:336 #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:414 msgid "All" msgstr "全部" #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:585 msgid "All Assembly files" msgstr "所有汇编文件" #. i18n: A double precision floating point number #: Source/Core/DolphinQt/Debugger/RegisterWidget.cpp:169 msgid "All Double" msgstr "所有双精度" #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:586 #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:771 #: Source/Core/DolphinQt/GCMemcardManager.cpp:363 #: Source/Core/DolphinQt/GCMemcardManager.cpp:440 #: Source/Core/DolphinQt/GCMemcardManager.cpp:591 #: Source/Core/DolphinQt/MainWindow.cpp:781 #: Source/Core/DolphinQt/RiivolutionBootWidget.cpp:139 #: Source/Core/DolphinQt/RiivolutionBootWidget.cpp:345 #: Source/Core/DolphinQt/Settings/PathPane.cpp:51 msgid "All Files" msgstr "所有文件" #: Source/Core/DolphinQt/GCMemcardCreateNewDialog.cpp:75 #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:664 msgid "All Files (*)" msgstr "所有文件 (*)" #. i18n: A floating point number #: Source/Core/DolphinQt/Debugger/RegisterWidget.cpp:166 msgid "All Float" msgstr "所有浮点数" #: Source/Core/DolphinQt/MainWindow.cpp:780 #: Source/Core/DolphinQt/Settings/PathPane.cpp:50 msgid "All GC/Wii files" msgstr "所有 GC/Wii 文件" #: Source/Core/DolphinQt/Debugger/RegisterWidget.cpp:159 msgid "All Hexadecimal" msgstr "全十六进制" #: Source/Core/DolphinQt/MainWindow.cpp:1409 #: Source/Core/DolphinQt/MainWindow.cpp:1418 msgid "All Save States (*.sav *.s##);; All Files (*)" msgstr "所有状态存档 (*.sav *.s##);; 所有文件 (*)" #: Source/Core/DolphinQt/Debugger/RegisterWidget.cpp:161 msgid "All Signed Integer" msgstr "全部有符号整数" #: Source/Core/DolphinQt/Debugger/RegisterWidget.cpp:163 msgid "All Unsigned Integer" msgstr "全部无符号整数" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:694 msgid "All files (*)" msgstr "所有文件 (*)" #: Source/Core/Core/NetPlayServer.cpp:1210 msgid "All players' codes synchronized." msgstr "所有玩家代码已同步。" #: Source/Core/Core/NetPlayServer.cpp:1152 msgid "All players' saves synchronized." msgstr "所有玩家存档已同步。" #: Source/Core/DolphinQt/Settings/GeneralPane.cpp:152 msgid "Allow Mismatched Region Settings" msgstr "允许不匹配的区域设置" #: Source/Core/DolphinQt/Main.cpp:262 msgid "Allow Usage Statistics Reporting" msgstr "允许使用情况统计报告" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:218 msgid "Allow Writes to SD Card" msgstr "允许写入 SD 卡" #: Source/Core/DolphinQt/Config/FreeLookWidget.cpp:39 msgid "" "Allows manipulation of the in-game camera.

If " "unsure, leave this unchecked." msgstr "" "允许操纵游戏中的镜头。

如无法确定，请不要选中此项。" "" #: Source/Core/DolphinQt/Config/CommonControllersWidget.cpp:37 #: Source/Core/DolphinQt/Config/ControllerInterface/ControllerInterfaceWindow.cpp:19 #: Source/Core/DolphinQt/Config/Mapping/FreeLookRotation.cpp:30 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtensionMotionInput.cpp:39 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuMotionControlIMU.cpp:37 msgid "Alternate Input Sources" msgstr "其他输入源" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:194 msgid "Always" msgstr "总是" #. i18n: Treat a controller as always being connected regardless of what #. devices the user actually has plugged in #: Source/Core/Core/HW/GCPadEmu.cpp:87 msgid "Always Connected" msgstr "始终连接" #: Source/Core/DolphinQt/GBAWidget.cpp:447 msgid "Always on &Top" msgstr "总在最前(&T)" #: Source/Core/Core/HW/DVD/DVDThread.cpp:115 msgid "An inserted disc was expected but not found." msgstr "光盘预计已插入但无法找到。" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:210 msgid "Anaglyph" msgstr "色差" #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:168 msgid "Analyze" msgstr "分析" #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Force.cpp:59 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Tilt.cpp:28 msgid "Angle" msgstr "角度" #. i18n: Refers to the dead-zone setting of gyroscope input. #: Source/Core/InputCommon/ControllerEmu/ControlGroup/IMUGyroscope.cpp:41 msgid "Angular velocity to ignore and remap." msgstr "要忽略并重新映射的角速度。" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:621 msgid "Anti-Aliasing" msgstr "抗锯齿" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:168 msgid "Anti-Aliasing:" msgstr "抗锯齿：" #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:76 msgid "Any Region" msgstr "任意区域" #: Source/Core/DolphinQt/MenuBar.cpp:1673 msgid "Append signature to" msgstr "附加签名到" #: Source/Core/DolphinQt/MenuBar.cpp:1012 msgid "Append to &Existing Signature File..." msgstr "附加到现有签名文件...(&E)" #: Source/Core/DolphinQt/MenuBar.cpp:1016 msgid "Appl&y Signature File..." msgstr "应用签名文件...(&Y)" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:550 msgid "" "Applies a post-processing effect after rendering a frame.

If unsure, select (off)." msgstr "" "在渲染完一帧后应用后处理效果。

如无法确定，请选" "择“关闭”。" #: Source/Core/DolphinQt/Config/InfoWidget.cpp:127 msgid "Apploader Date:" msgstr "应用载入器时间：" #: qtbase/src/gui/kernel/qplatformtheme.cpp:738 msgid "Apply" msgstr "应用" #: Source/Core/DolphinQt/MenuBar.cpp:1696 msgid "Apply signature file" msgstr "应用签名文件" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:159 msgid "Arbitrary Mipmap Detection" msgstr "特殊多级纹理检测" #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:266 msgid "Are you sure that you want to delete '%1'?" msgstr "确定要删除 '%1' 吗?" #: Source/Core/DolphinQt/GameList/GameList.cpp:834 msgid "Are you sure you want to delete this file?" msgstr "确定要删除该文件吗?" #: Source/Core/DolphinQt/ResourcePackManager.cpp:241 msgid "Are you sure you want to delete this pack?" msgstr "确定要删除这个包吗？" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:499 msgid "Are you sure you want to quit NetPlay?" msgstr "确定要退出联机吗？" #: Source/Core/DolphinQt/ConvertDialog.cpp:284 msgid "Are you sure?" msgstr "确定?" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:142 msgid "Area Sampling" msgstr "区域取样" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:304 msgid "Aspect Ratio" msgstr "长宽比" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:90 #: Source/Core/DolphinQt/Settings/WiiPane.cpp:161 msgid "Aspect Ratio:" msgstr "长宽比：" #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:366 msgid "Assemble" msgstr "汇编" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:602 msgid "Assemble instruction" msgstr "汇编指令" #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:234 msgid "Assembler" msgstr "汇编器" #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:770 msgid "Assembly File" msgstr "汇编文件" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:295 msgid "Assign Controller Ports" msgstr "指定控制器端口" #: Source/Core/DolphinQt/NetPlay/PadMappingDialog.cpp:21 msgid "Assign Controllers" msgstr "指定控制器" #: Source/Core/DolphinQt/GCMemcardManager.cpp:536 msgid "" "At least two of the selected save files have the same internal filename." msgstr "至少有两个选定的存档文件具有相同的内部文件名。" #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.cpp:281 msgid "Attach MotionPlus" msgstr "附带 MotionPlus" #: Source/Core/DolphinQt/Config/SettingsWindow.cpp:39 msgid "Audio" msgstr "音频" #: Source/Core/DolphinQt/Settings/AudioPane.cpp:81 msgid "Audio Backend:" msgstr "音频后端：" #: Source/Core/DolphinQt/Settings/AudioPane.cpp:140 msgid "Audio Stretching Settings" msgstr "音频伸缩设置" #: Source/Core/DiscIO/Enums.cpp:33 msgid "Australia" msgstr "澳大利亚" #: Source/Core/DolphinQt/ResourcePackManager.cpp:92 msgid "Author" msgstr "作者" #: Source/Core/DolphinQt/AboutDialog.cpp:68 msgid "Authors" msgstr "作者" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:59 #: Source/Core/DolphinQt/Settings/WiiPane.cpp:75 msgid "Auto" msgstr "自动" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:69 msgid "Auto (Multiple of 640x528)" msgstr "自动（640x528 的倍数）" #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:101 msgid "Auto Save" msgstr "自动保存" #: Source/Core/DolphinQt/Settings/GeneralPane.cpp:187 msgid "Auto Update Settings" msgstr "自动更新设置" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:480 msgid "" "Auto internal resolution is not allowed in strict sync mode, as it depends " "on window size.\n" "\n" "Please select a specific internal resolution." msgstr "" "严格同步模式下不允许自动内部分辨率，因为它取决于窗口大小。\n" "\n" "请选择特定的内部分辨率。" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:106 msgid "Auto-Adjust Window Size" msgstr "自动调整窗口大小" #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Cursor.cpp:63 msgid "Auto-Hide" msgstr "自动隐藏" #: Source/Core/DolphinQt/MenuBar.cpp:1312 msgid "Auto-detect RSO modules?" msgstr "自动检测 RSO 模块？" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:238 msgid "Automatically Sync with Folder" msgstr "自动与文件夹同步" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:244 msgid "" "Automatically adjusts the window size to the internal resolution." "

If unsure, leave this unchecked." msgstr "" "自动将窗口大小调整为内部分辨率。

如无法确定，请不要" "选中此项。" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:242 msgid "Automatically update Current Values" msgstr "自动更新当前数值" #. i18n: One of the options shown below "Address Space". "Auxiliary" is the address space of ARAM #. (Auxiliary RAM). #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:171 msgid "Auxiliary" msgstr "副内存" #. i18n: The symbol for the unit "bytes" #: Source/Core/UICommon/UICommon.cpp:545 msgid "B" msgstr "B" #: Source/Core/Core/HW/GCMemcard/GCMemcardDirectory.cpp:602 msgid "BAT incorrect. Dolphin will now exit" msgstr "BAT 错误，模拟器即将退出" #: Source/Core/Core/HW/EXI/EXI_DeviceEthernet.cpp:73 msgid "" "BBA MAC address {0} invalid for XLink Kai. A valid Nintendo GameCube MAC " "address must be used. Generate a new MAC address starting with 00:09:bf or " "00:17:ab." msgstr "" "BBA MAC 地址 {0} 对于 XLink Kai 无效。必须使用有效的任天堂 GameCube MAC 地" "址。 生成一个以 00:09:bf 或 00:17:ab 开头的新 MAC 地址。" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:210 msgid "BIOS:" msgstr "BIOS:" #: Source/Core/DolphinQt/FIFO/FIFOAnalyzer.cpp:537 msgid "BP register " msgstr "BP 寄存器" #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:233 msgid "Back Chain" msgstr "后链" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:299 msgid "Backend" msgstr "后端" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:162 msgid "Backend Multithreading" msgstr "后端多线程" #: Source/Core/DolphinQt/Settings/AudioPane.cpp:78 msgid "Backend Settings" msgstr "后端设置" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:84 msgid "Backend:" msgstr "后端：" #: Source/Core/DolphinQt/Config/CommonControllersWidget.cpp:35 #: Source/Core/DolphinQt/Config/FreeLookWidget.cpp:71 msgid "Background Input" msgstr "后台输入" #: Source/Core/Core/FreeLookManager.cpp:93 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Force.cpp:25 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/IMUAccelerometer.cpp:23 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Tilt.cpp:21 msgid "Backward" msgstr "后" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:822 msgid "Bad Value Given" msgstr "给定值错误" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:637 #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:683 #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:808 msgid "Bad address provided." msgstr "地址格式不正确。" #: Source/Core/DiscIO/VolumeVerifier.cpp:355 msgid "Bad dump" msgstr "错误的转储" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:643 #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:689 #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:814 msgid "Bad offset provided." msgstr "提交的偏移量不正确。" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:652 msgid "Bad value provided." msgstr "值格式不正确。" #: Source/Core/DolphinQt/GameList/GameList.cpp:1001 #: Source/Core/DolphinQt/GameList/GameListModel.cpp:218 #: Source/Core/DolphinQt/GCMemcardManager.cpp:152 #: Source/Core/DolphinQt/MenuBar.cpp:653 msgid "Banner" msgstr "标图" #: Source/Core/DolphinQt/Config/InfoWidget.cpp:146 msgid "Banner Details" msgstr "标图详细信息" #: Source/Core/DolphinQt/Config/InfoWidget.cpp:170 msgid "Banner:" msgstr "标图：" #: Source/Core/Core/HW/WiimoteEmu/Extension/Guitar.cpp:94 msgid "Bar" msgstr "摇把" #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:417 msgid "Base Address" msgstr "基地址" #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:185 msgid "Base priority" msgstr "基本优先级" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:54 msgid "Basic" msgstr "基本" #: Source/Core/DolphinQt/Settings/GeneralPane.cpp:141 msgid "Basic Settings" msgstr "基本设置" #: Source/Core/Core/HW/WiimoteEmu/Extension/Drums.cpp:39 msgid "Bass" msgstr "低音" #: Source/Core/DolphinQt/Main.cpp:235 msgid "Batch mode cannot be used without specifying a game to launch." msgstr "使用批处理模式必须指定要启动的游戏" #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.cpp:297 msgid "Battery" msgstr "电池" #: Source/Core/DolphinQt/Settings/GeneralPane.cpp:200 msgid "Beta (once a month)" msgstr "体验版（每月一次）" #: Source/Core/DolphinQt/Config/ControllerInterface/DualShockUDPClientAddServerDialog.cpp:37 msgid "BetterJoy, DS4Windows, etc" msgstr "BetterJoy，DS4Windows，等" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:134 msgid "Bicubic: B-Spline" msgstr "双三次插值：B样条曲线" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:138 msgid "Bicubic: Catmull-Rom" msgstr "双三次插值：Catmull-Rom 插值" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:136 msgid "Bicubic: Mitchell-Netravali" msgstr "双三次插值：Mitchell-Netravali 过滤" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:132 msgid "Bilinear" msgstr "双线性" #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:426 msgid "Binary SSL" msgstr "二进制 SSL" #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:427 msgid "Binary SSL (read)" msgstr "二进制 SSL (读取)" #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:428 msgid "Binary SSL (write)" msgstr "二进制 SSL (写入)" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:147 msgid "Bitrate (kbps):" msgstr "比特率 (kbps):" #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:292 msgid "" "Blank figure creation failed at:\n" "%1, try again with a different character" msgstr "" "创建空白角色失败于：\n" "%1 ，请使用其他字符重试" #: Source/Core/DolphinQt/GameList/GameList.cpp:1011 #: Source/Core/DolphinQt/GameList/GameListModel.cpp:232 #: Source/Core/DolphinQt/MenuBar.cpp:663 msgid "Block Size" msgstr "区块大小" #: Source/Core/DolphinQt/Config/InfoWidget.cpp:75 #: Source/Core/DolphinQt/ConvertDialog.cpp:64 msgid "Block Size:" msgstr "区块大小：" #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:330 msgid "Blocking" msgstr "屏蔽" #: Source/Core/DolphinQt/GCMemcardManager.cpp:158 msgid "Blocks" msgstr "区块" #: Source/Core/Core/HW/WiimoteEmu/Extension/Drums.cpp:36 #: Source/Core/Core/HW/WiimoteEmu/Extension/Guitar.cpp:52 msgid "Blue" msgstr "蓝" #: Source/Core/Core/HW/WiimoteEmu/Extension/Turntable.cpp:43 msgid "Blue Left" msgstr "蓝 左" #: Source/Core/Core/HW/WiimoteEmu/Extension/Turntable.cpp:46 msgid "Blue Right" msgstr "蓝 右" #: Source/Core/Core/IOS/USB/Bluetooth/BTStub.cpp:14 msgid "" "Bluetooth passthrough mode is enabled, but Dolphin was built without libusb. " "Passthrough mode cannot be used." msgstr "" "蓝牙直通模式已启用，但 Dolphin 构建没有加入 libusb 驱动。无法使用直通模式。" #: Source/Core/DolphinQt/MenuBar.cpp:568 msgid "Boot to Pause" msgstr "引导后暂停" #: Source/Core/DolphinQt/MainWindow.cpp:1804 msgid "BootMii NAND backup file (*.bin);;All Files (*)" msgstr "BootMii NAND 备份文件 (*.bin);; 所有文件 (*)" #: Source/Core/DolphinQt/MainWindow.cpp:1830 msgid "BootMii keys file (*.bin);;All Files (*)" msgstr "BootMii 密钥文件 (*.bin);; 所有文件 (*)" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:175 msgid "Borderless Fullscreen" msgstr "无边框全屏" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:357 msgid "Bottom" msgstr "底部" #. i18n: "Branch" means the version control term, not a literal tree branch. #: Source/Core/DolphinQt/AboutDialog.cpp:53 msgid "Branch: %1" msgstr "分支: %1" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:160 msgid "Branches" msgstr "分支" #. i18n: This is a selectable action when adding a breakpoint #: Source/Core/DolphinQt/Debugger/BreakpointDialog.cpp:143 msgid "Break" msgstr "中断" #: Source/Core/Core/HotkeyManager.cpp:340 #: Source/Core/DolphinQt/Config/Mapping/HotkeyDebugging.cpp:26 msgid "Breakpoint" msgstr "断点" #: Source/Core/DolphinQt/Debugger/CodeWidget.cpp:566 msgid "Breakpoint encountered! Step out aborted." msgstr "遇到断点！跳出已中止。" #: Source/Core/DolphinQt/Debugger/BreakpointWidget.cpp:42 msgid "Breakpoints" msgstr "断点" #: Source/Core/Core/HW/EXI/EXI_Device.h:107 msgid "Broadband Adapter (HLE)" msgstr "宽带适配器 (HLE)" #: Source/Core/Core/HW/EXI/EXI_Device.h:100 msgid "Broadband Adapter (TAP)" msgstr "宽带适配器 (TAP)" #: Source/Core/Core/HW/EXI/EXI_Device.h:105 msgid "Broadband Adapter (XLink Kai)" msgstr "宽带适配器 (XLink Kai)" #: Source/Core/Core/HW/EXI/EXI_Device.h:106 msgid "Broadband Adapter (tapserver)" msgstr "宽带适配器（tap 服务器）" #: Source/Core/DolphinQt/Settings/BroadbandAdapterSettingsDialog.cpp:57 msgid "Broadband Adapter DNS setting" msgstr "宽带适配器 DNS 设置" #: Source/Core/DolphinQt/Settings/BroadbandAdapterSettingsDialog.cpp:108 msgid "Broadband Adapter Error" msgstr "宽带适配器错误" #. i18n: MAC stands for Media Access Control. A MAC address uniquely identifies a network #. interface (physical) like a serial number. "MAC" should be kept in translations. #: Source/Core/DolphinQt/Settings/BroadbandAdapterSettingsDialog.cpp:48 msgid "Broadband Adapter MAC Address" msgstr "宽带适配器 MAC 地址" #: Source/Core/DolphinQt/MenuBar.cpp:245 msgid "Browse &NetPlay Sessions...." msgstr "浏览联机会话...(&N)" #: Source/Core/DolphinQt/Settings/AudioPane.cpp:145 msgid "Buffer Size:" msgstr "缓冲区大小:" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:927 msgid "Buffer size changed to %1" msgstr "缓冲区大小更改为 %1" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:133 #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:958 msgid "Buffer:" msgstr "缓冲区：" #: Source/Core/VideoBackends/OGL/OGLConfig.cpp:266 msgid "" "Buggy GPU driver detected.\n" "Please either install the closed-source GPU driver or update your Mesa 3D " "version." msgstr "" "检测到错误的 GPU 驱动程序。\n" "请安装闭源 GPU 驱动程序或更新 Mesa 3D 版本。" #: Source/Core/Core/HW/GCPadEmu.cpp:75 msgid "Button" msgstr "按键" #: Source/Core/Core/HW/GBAPadEmu.h:38 Source/Core/Core/HW/GCPadEmu.h:56 #: Source/Core/Core/HW/WiimoteEmu/Extension/Classic.h:219 #: Source/Core/Core/HW/WiimoteEmu/Extension/Drums.cpp:75 #: Source/Core/Core/HW/WiimoteEmu/Extension/Guitar.cpp:83 #: Source/Core/Core/HW/WiimoteEmu/Extension/Nunchuk.h:175 #: Source/Core/Core/HW/WiimoteEmu/Extension/Shinkansen.cpp:33 #: Source/Core/Core/HW/WiimoteEmu/Extension/Turntable.cpp:54 #: Source/Core/Core/HW/WiimoteEmu/Extension/UDrawTablet.cpp:40 #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.h:119 #: Source/Core/DolphinQt/Config/Mapping/GBAPadEmu.cpp:26 #: Source/Core/DolphinQt/Config/Mapping/GCPadEmu.cpp:24 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:48 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:82 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:110 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:136 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:156 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:188 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:237 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuGeneral.cpp:34 #: Source/Core/DolphinQt/TAS/GBATASInputWindow.cpp:67 #: Source/Core/DolphinQt/TAS/GCTASInputWindow.cpp:96 msgid "Buttons" msgstr "按键" #: Source/Core/DolphinQt/Config/GraphicsModListWidget.cpp:213 msgid "By: %1" msgstr "作者：%1" #: Source/Core/Core/HW/GCPadEmu.cpp:57 #: Source/Core/DolphinQt/Config/Mapping/GCPadEmu.cpp:31 #: Source/Core/DolphinQt/TAS/GCTASInputWindow.cpp:31 msgid "C Stick" msgstr "C 摇杆" #: Source/Core/DolphinQt/MenuBar.cpp:1011 msgid "C&reate Signature File..." msgstr "创建签名文件...(&R)" #: Source/Core/DolphinQt/FIFO/FIFOAnalyzer.cpp:554 msgid "CP register " msgstr "CP 寄存器" #: Source/Core/DolphinQt/Settings/AdvancedPane.cpp:63 msgid "CPU Emulation Engine:" msgstr "CPU 模拟引擎:" #: Source/Core/DolphinQt/Settings/AdvancedPane.cpp:52 msgid "CPU Options" msgstr "CPU 选项" #: Source/Core/DolphinQt/Config/VerifyWidget.cpp:74 msgid "CRC32:" msgstr "CRC32:" #: Source/Core/DolphinQt/Settings/AdvancedPane.cpp:32 msgid "Cached Interpreter (slower)" msgstr "缓存解释器（较慢）" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:325 msgid "" "Caches custom textures to system RAM on startup.

This can require " "exponentially more RAM but fixes possible stuttering." "

If unsure, leave this unchecked." msgstr "" "在启动时将自定义纹理缓存到系统内存。

这将导致内存需求指数级增加但会修" "正可能的卡顿。

如无法确定，请不要选中此项。" #: Source/Core/DolphinQt/Config/VerifyWidget.cpp:108 msgid "Calculate" msgstr "计算" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:558 msgid "" "Calculates lighting of 3D objects per-pixel rather than per-vertex, " "smoothing out the appearance of lit polygons and making individual triangles " "less noticeable.

Rarely causes slowdowns or graphical issues." "

If unsure, leave this unchecked." msgstr "" "逐个像素而非逐个顶点地计算 3D 物体的光照，这将使被照明多边形外观更平滑，单个" "三角面更不明显。

很少造成速度降低或图像问题。" "

如无法确定，请不要选中此项。" #: Source/Core/DolphinQt/Config/Mapping/MappingIndicator.cpp:897 msgid "Calibrate" msgstr "校准" #: Source/Core/DolphinQt/Config/Mapping/MappingIndicator.cpp:889 msgid "Calibration" msgstr "校准" #: Source/Core/InputCommon/ControllerEmu/ControlGroup/IMUGyroscope.cpp:45 msgid "Calibration Period" msgstr "校准周期" #: Source/Core/DolphinQt/FIFO/FIFOAnalyzer.cpp:291 msgid "Call display list at %1 with size %2" msgstr "调用位于 %1 大小为 %2 的显示列表" #: Source/Core/DolphinQt/Debugger/CodeWidget.cpp:144 msgid "Callers" msgstr "调用方" #: Source/Core/DolphinQt/Debugger/CodeWidget.cpp:140 msgid "Calls" msgstr "调用" #: Source/Core/DolphinQt/Debugger/CodeWidget.cpp:132 msgid "Callstack" msgstr "调用堆栈" #: Source/Core/DolphinQt/Config/FreeLookWidget.cpp:75 msgid "Camera 1" msgstr "镜头 1" #. i18n: Refers to emulated wii remote camera properties. #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.cpp:242 #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.cpp:250 msgid "Camera field of view (affects sensitivity of pointing)." msgstr "镜头视野（影响指向的灵敏度）。" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:550 msgid "Can only generate AR code for values in virtual memory." msgstr "只能为虚拟内存中的数值生成 AR 代码。" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:99 msgid "Can't be modified yet!" msgstr "现在还不能进行修改！" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:291 msgid "Can't edit villains for this trophy!" msgstr "无法对此奖杯编辑反派角色！" #: Source/Core/Core/IOS/USB/Bluetooth/BTEmu.cpp:1828 msgid "Can't find Wii Remote by connection handle {0:02x}" msgstr "不能按照连接句柄 {0:02x} 找到 Wii 遥控器" #: Source/Core/DolphinQt/MainWindow.cpp:1535 #: Source/Core/DolphinQt/MainWindow.cpp:1602 msgid "Can't start a NetPlay Session while a game is still running!" msgstr "游戏运行时无法启动联机会话！" #: Source/Core/DolphinQt/Config/ControllerInterface/DualShockUDPClientAddServerDialog.cpp:57 #: Source/Core/DolphinQt/Config/VerifyWidget.cpp:158 #: Source/Core/DolphinQt/MenuBar.cpp:1344 #: Source/Core/DolphinQt/NKitWarningDialog.cpp:62 #: Source/Core/DolphinQt/Settings/USBDeviceAddToWhitelistDialog.cpp:50 #: Source/Core/DolphinQt/Settings/WiiPane.cpp:279 #: Source/Core/DolphinQt/Settings/WiiPane.cpp:304 #: qtbase/src/gui/kernel/qplatformtheme.cpp:732 msgid "Cancel" msgstr "取消" #: Source/Core/DolphinQt/Config/Mapping/MappingIndicator.cpp:937 msgid "Cancel Calibration" msgstr "取消校准" #: Source/Core/Core/FifoPlayer/FifoPlayer.cpp:247 msgid "Cannot SingleStep the FIFO. Use Frame Advance instead." msgstr "无法单步执行 FIFO，使用帧步进代替。" #: Source/Core/Core/Boot/Boot_WiiWAD.cpp:39 msgid "Cannot boot this WAD because it could not be installed to the NAND." msgstr "无法启动此 WAD，因为无法将其安装到 NAND 中。" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:286 msgid "Cannot compare against last value on first search." msgstr "无法与首次搜索的上个值进行比较。" #: Source/Core/Core/Boot/Boot.cpp:634 msgid "Cannot find the GC IPL." msgstr "找不到 GC IPL。" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:553 msgid "Cannot generate AR code for this address." msgstr "无法为此地址生成 AR 代码。" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:438 msgid "Cannot refresh without results." msgstr "没有结果下无法刷新。" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:535 msgid "Cannot set GCI folder to an empty path." msgstr "无法将 GCI 文件夹设置为空路径。" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:433 msgid "Cannot set memory card to an empty path." msgstr "无法将存储卡设置为空路径。" #: Source/Core/Core/Boot/Boot.cpp:632 msgid "Cannot start the game, because the GC IPL could not be found." msgstr "找不到 GC IPL，无法启动游戏。" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:312 msgid "Captured villain %1:" msgstr "已捕获的反派 %1:" #: Source/Core/DolphinQt/GCMemcardCreateNewDialog.cpp:41 msgid "Card Size" msgstr "卡大小" #. i18n: Refers to the "center" of a TaTaCon drum. #: Source/Core/Core/HW/WiimoteEmu/Extension/TaTaCon.cpp:45 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:222 msgid "Center" msgstr "中心" #: Source/Core/Core/HotkeyManager.cpp:38 msgid "Center Mouse" msgstr "鼠标中键" #: Source/Core/DolphinQt/Config/Mapping/MappingIndicator.cpp:898 msgid "Center and Calibrate" msgstr "中心和校准" #: Source/Core/DolphinQt/GameList/GameList.cpp:421 msgid "Change &Disc" msgstr "切换光盘(&D)" #: Source/Core/DolphinQt/MenuBar.cpp:212 msgid "Change &Disc..." msgstr "切换光盘...(&D)" #: Source/Core/Core/HotkeyManager.cpp:28 msgid "Change Disc" msgstr "切换光盘" #: Source/Core/DolphinQt/Settings/GeneralPane.cpp:155 msgid "Change Discs Automatically" msgstr "自动切换光盘" #: Source/Core/Core/Movie.cpp:1261 msgid "Change the disc to {0}" msgstr "切换光盘至 {0}" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:278 msgid "" "Changes the color of the FPS counter depending on emulation speed." "

If unsure, leave this checked." msgstr "" "根据模拟速度改变 FPS 计数器的颜色。

如无法确定，请选" "中此项。" #: Source/Core/DolphinQt/Config/FreeLookWidget.cpp:51 msgid "" "Changes the in-game camera type during Free Look.

Six Axis: Offers " "full camera control on all axes, akin to moving a spacecraft in zero " "gravity. This is the most powerful Free Look option but is the most " "challenging to use.

First Person: Controls the free camera similarly " "to a first person video game. The camera can rotate and travel, but roll is " "impossible. Easy to use, but limiting.

Orbital: Rotates the free " "camera around the original camera. Has no lateral movement, only rotation " "and you may zoom up to the camera's origin point." msgstr "" "在自由视点下更改游戏中的镜头类型。

六轴：在所有轴上提供完整的镜头控" "制，类似于在零重力下移动航天器。这是功能最强大的自由视点选项，但使用起来最具" "挑战性。

第一人称视角：控制自由镜头类似于第一人称视角游戏。镜头可以旋" "转和移动，但无法滚动。易于使用，但有局限性。

轨道：将自由镜头围绕原始" "镜头旋转。没有横向移动，只能旋转，可以放大视角到镜头的原点。" #: Source/Core/DolphinQt/Config/CheatWarningWidget.cpp:66 msgid "Changing cheats will only take effect when the game is restarted." msgstr "游戏重启后更改的金手指才会生效。" #: Source/Core/DolphinQt/Config/FilesystemWidget.cpp:151 msgid "Channel Partition (%1)" msgstr "通道分区 (%1)" #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:262 msgid "Character entered is invalid!" msgstr "输入的字符无效！" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:266 msgid "Chat" msgstr "聊天" #: Source/Core/DolphinQt/Config/CheatCodeEditor.cpp:25 msgid "Cheat Code Editor" msgstr "金手指编辑器" #: Source/Core/DolphinQt/CheatsManager.cpp:173 msgid "Cheat Search" msgstr "金手指搜索" #: Source/Core/DolphinQt/CheatsManager.cpp:29 msgid "Cheats Manager" msgstr "金手指管理器" #: Source/Core/DolphinQt/MenuBar.cpp:277 msgid "Check NAND..." msgstr "校验 NAND..." #: Source/Core/DolphinQt/Settings/PathPane.cpp:149 msgid "Check for Game List Changes in the Background" msgstr "在后台检查游戏列表变更" #: Source/Core/DolphinQt/AboutDialog.cpp:58 msgid "Check for updates" msgstr "检查更新" #: Source/Core/DolphinQt/GameList/GameList.cpp:860 msgid "" "Check whether you have the permissions required to delete the file or " "whether it's still in use." msgstr "请检查您是否有删除该文件的权限以及其是否仍在使用。" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:210 msgid "Checksum" msgstr "校验" #: Source/Core/UICommon/NetPlayIndex.cpp:249 msgid "China" msgstr "中国" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:231 msgid "Choose" msgstr "选择" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:630 msgid "Choose a file to open" msgstr "选择要打开的文件" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:421 msgid "Choose a file to open or create" msgstr "选择要打开或创建的文件" #: Source/Core/DolphinQt/MenuBar.cpp:1718 msgid "Choose priority input file" msgstr "选择优先输入文件" #: Source/Core/DolphinQt/MenuBar.cpp:1723 msgid "Choose secondary input file" msgstr "选择次要输入文件" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:524 msgid "Choose the GCI base folder" msgstr "选择 GCI 基础文件夹" #: Source/Core/DolphinQt/Config/FilesystemWidget.cpp:217 msgid "Choose the folder to extract to" msgstr "选择提取目标文件夹" #. i18n: Refers to emulated wii remote movements. #: Source/Core/InputCommon/ControllerEmu/ControlGroup/IMUCursor.cpp:39 msgid "Clamping of rotation about the yaw axis." msgstr "围绕偏转轴的旋转夹角。" #: Source/Core/DolphinQt/TAS/WiiTASInputWindow.cpp:334 msgid "Classic Buttons" msgstr "传统按键" #: Source/Core/Core/HW/WiimoteEmu/Extension/Classic.cpp:54 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:45 msgid "Classic Controller" msgstr "传统控制器" #: Source/Core/DolphinQt/Config/LogWidget.cpp:136 #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:265 #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:154 #: Source/Core/DolphinQt/Debugger/BreakpointWidget.cpp:113 #: Source/Core/DolphinQt/Debugger/WatchWidget.cpp:103 #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:107 msgid "Clear" msgstr "清除" #: Source/Core/DolphinQt/MenuBar.cpp:884 msgid "Clear Cache" msgstr "清除缓存" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:127 msgid "Clear Slot" msgstr "清除插槽" #: Source/Core/DolphinQt/Settings/AdvancedPane.cpp:90 msgid "Clock Override" msgstr "时钟频率覆盖" #: Source/Core/DolphinQt/Config/ARCodeWidget.cpp:191 msgid "Clone and &Edit Code..." msgstr "复制并编辑代码...(&E)" #: Source/Core/DolphinQt/SearchBar.cpp:27 #: qtbase/src/gui/kernel/qplatformtheme.cpp:730 msgid "Close" msgstr "关闭" #: Source/Core/DolphinQt/MenuBar.cpp:551 Source/Core/DolphinQt/MenuBar.cpp:554 msgid "Co&nfiguration" msgstr "程序设置(&N)" #: Source/Core/DolphinQt/Debugger/CodeWidget.cpp:40 msgid "Code" msgstr "代码" #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:47 #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:163 #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:177 #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:202 #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:210 #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:223 #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:301 #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:311 msgid "Code Diff Tool" msgstr "代码差异工具" #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:537 #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:558 msgid "Code Diff Tool Help" msgstr "代码差异工具帮助" #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:67 msgid "Code did not get executed" msgstr "代码未执行" #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:68 msgid "Code has been executed" msgstr "代码已执行" #: Source/Core/DolphinQt/Config/CheatCodeEditor.cpp:93 msgid "Code:" msgstr "代码：" #: Source/Core/Core/NetPlayClient.cpp:1865 msgid "Codes received!" msgstr "代码已接收！" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:630 msgid "Color Correction" msgstr "色彩校正" #: Source/Core/DolphinQt/Config/Graphics/ColorCorrectionConfigWindow.cpp:24 msgid "Color Correction Configuration" msgstr "色彩校正配置" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:180 msgid "Color Correction:" msgstr "色彩校正：" #: Source/Core/DolphinQt/Config/Graphics/ColorCorrectionConfigWindow.cpp:58 msgid "Color Space" msgstr "色彩空间" #: Source/Core/DolphinQt/MenuBar.cpp:1014 msgid "Combine &Two Signature Files..." msgstr "合并两个签名文件...(&T)" #. i18n: This is "common" as in "shared", not the opposite of "uncommon" #: Source/Core/DolphinQt/Config/CommonControllersWidget.cpp:33 msgid "Common" msgstr "通用" #: Source/Core/DolphinQt/Config/NewPatchDialog.cpp:151 msgid "Comparand:" msgstr "被比较字：" #: Source/Core/DiscIO/VolumeVerifier.cpp:1430 msgid "" "Compared to the Wii disc release of the game, problems of low severity were " "found. Despite this, it's possible that this is a good dump compared to the " "Wii U eShop release of the game. Dolphin can't verify this." msgstr "" "与游戏的 Wii 光盘发布版本相比，发现了严重程度较低的问题。尽管如此，与游戏的 " "Wii U eShop 版本比较的话这可能是一个正确的转储。Dolphin 无法验证这一点。" #: Source/Core/DiscIO/VolumeVerifier.cpp:1394 msgid "" "Compared to the Wii disc release of the game, this is a bad dump. Despite " "this, it's possible that this is a good dump compared to the Wii U eShop " "release of the game. Dolphin can't verify this." msgstr "" "与游戏的 Wii 光盘发布版本相比，这是错误的转储。尽管如此，与游戏的 Wii U " "eShop 版本比较的话这可能是一个正确的转储。Dolphin 无法验证这一点。" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:135 msgid "Compile Shaders Before Starting" msgstr "在开始前编译着色器" #: Source/Core/VideoCommon/ShaderCache.cpp:174 msgid "Compiling Shaders" msgstr "正在编译着色器" #: Source/Core/DolphinQt/GameList/GameList.cpp:1012 #: Source/Core/DolphinQt/GameList/GameListModel.cpp:234 #: Source/Core/DolphinQt/MenuBar.cpp:664 msgid "Compression" msgstr "压缩" #: Source/Core/DolphinQt/ConvertDialog.cpp:72 msgid "Compression Level:" msgstr "压缩级别：" #: Source/Core/DolphinQt/Config/InfoWidget.cpp:70 #: Source/Core/DolphinQt/ConvertDialog.cpp:68 msgid "Compression:" msgstr "压缩：" #. i18n: If a condition is set for a breakpoint, the condition becoming true is a prerequisite for #. triggering the breakpoint. #. i18n: If a condition is set for a breakpoint, the condition becoming true is a prerequisite #. for triggering the breakpoint. #: Source/Core/DolphinQt/Debugger/BreakpointDialog.cpp:159 #: Source/Core/DolphinQt/Debugger/BreakpointDialog.cpp:278 #: Source/Core/DolphinQt/Debugger/BreakpointWidget.cpp:167 msgid "Condition" msgstr "条件" #. i18n: If a condition is set for a breakpoint, the condition becoming true is a prerequisite for #. triggering the breakpoint. #: Source/Core/DolphinQt/Debugger/BreakpointDialog.cpp:178 msgid "Condition:" msgstr "条件：" #: Source/Core/DolphinQt/Config/NewPatchDialog.cpp:150 msgid "Conditional" msgstr "条件" #. i18n: The title for a dialog that shows help for how to use conditions. If a condition is set #. for a breakpoint, the condition becoming true is a prerequisite for triggering the breakpoint. #: Source/Core/DolphinQt/Debugger/BreakpointDialog.cpp:368 msgid "Conditional help" msgstr "附带条件帮助" #: Source/Core/DolphinQt/Debugger/BreakpointDialog.cpp:327 msgid "" "Conditions:\n" "Sets an expression that is evaluated when a breakpoint is hit. If the " "expression is false or 0, the breakpoint is ignored until hit again. " "Statements should be separated by a comma. Only the last statement will be " "used to determine what to do.\n" "\n" "Registers that can be referenced:\n" "GPRs : r0..r31\n" "FPRs : f0..f31\n" " LR, CTR, PC\n" "\n" "Functions:\n" "Set a register: r1 = 8\n" "Casts: s8(0xff). Available: s8, u8, s16, u16, s32, u32\n" "Callstack: callstack(0x80123456), callstack(\"anim\")\n" "Compare Strings: streq(r3, \"abc\"). Both parameters can be addresses or " "string constants.\n" "Read Memory: read_u32(0x80000000). Available: u8, s8, u16, s16, u32, s32, " "f32, f64\n" "Write Memory: write_u32(r3, 0x80000000). Available: u8, u16, u32, f32, f64\n" "*currently writing will always be triggered\n" "\n" "Operations:\n" "Unary: -u, !u, ~u\n" "Math: * / + -, power: **, remainder: %, shift: <<, >>\n" "Compare: <, <=, >, >=, ==, !=, &&, ||\n" "Bitwise: &, |, ^\n" "\n" "Examples:\n" "r4 == 1\n" "f0 == 1.0 && f2 < 10.0\n" "r26 <= r0 && ((r5 + 3) & -4) * ((r6 + 3) & -4)* 4 > r0\n" "p = r3 + 0x8, p == 0x8003510 && read_u32(p) != 0\n" "Write and break: r4 = 8, 1\n" "Write and continue: f3 = f1 + f2, 0\n" "The condition must always be last\n" "\n" "Strings should only be used in callstack() or streq() and \"quoted\". Do not " "assign strings to a variable.\n" "All variables will be printed in the Memory Interface log, if there's a hit " "or a NaN result. To check for issues, assign a variable to your equation, so " "it can be printed.\n" "\n" "Note: All values are internally converted to Doubles for calculations. It's " "possible for them to go out of range or to become NaN. A warning will be " "given if NaN is returned, and the var that became NaN will be logged." msgstr "" "状况：\n" "设置命中断点时计算的表达式。如果表达式为 false 或 0，则忽略断点，直到再次命中" "断点。语句应该用逗号间隔。只有最后一个语句将用于确定要做什么。\n" "\n" "可以参考的寄存器：\n" "GPRs : r0..r31\n" "FPRs : f0..f31\n" "LR, CTR, PC\n" "\n" "函数：\n" "设置寄存器：r1 = 8\n" "转换：s8(0xff). 可用：s8, u8, s16, u16, s32, u32\n" "调用堆栈：callstack(0x80123456), callstack(\"anim\")\n" "比较字符串：streq(r3, \"abc\"). 两个参数都可以是地址或字符串常量。\n" "读取内存：read_u32(0x80000000). 可用：u8, s8, u16, s16, u32, s32, f32, f64\n" "写入内存：write_u32(r3, 0x80000000). 可用：u8, u16, u32, f32, f64\n" "*当前写入会一直触发\n" "\n" "操作：\n" "一元：-u, !u, ~u\n" "数学：* / + -, power: **, remainder: %, shift: <<, >>\n" "比较：<, <=, >, >=, ==, !=, &&, ||\n" "按位：&, |, ^\n" "\n" "示例：\n" "r4 == 1\n" "f0 == 1.0 && f2 < 10.0\n" "r26 <= r0 && ((r5 + 3) & -4) * ((r6 + 3) & -4)* 4 > r0\n" "p = r3 + 0x8, p == 0x8003510 && read_u32(p) != 0\n" "写入并中断：r4 = 8, 1\n" "写入并继续：f3 = f1 + f2, 0\n" "条件必须始终是最后一个\n" "\n" "字符串只能在 callstack() 或 streq() 中使用并且“引用”。不要将字符串分配给变" "量。\n" "如果有命中或 NaN 结果，所有变量都将打印在内存接口日志中。要检查问题，请为方程" "分配一个变量，以便可以打印显示。\n" "\n" "注意：所有值都会在内部转换为双精度数以进行计算。它们有可能超出范围或变为 " "NaN。如果返回 NaN 将给出警告，并且将变为 NaN 的值记录下来。" #: Source/Core/DolphinQt/ToolBar.cpp:129 msgid "Config" msgstr "设置" #: Source/Core/DolphinQt/Config/GamecubeControllersWidget.cpp:86 #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:145 #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:148 #: Source/Core/DolphinQt/Config/WiimoteControllersWidget.cpp:141 msgid "Configure" msgstr "配置" #: Source/Core/DolphinQt/Config/FreeLookWidget.cpp:45 msgid "Configure Controller" msgstr "配置控制器" #: Source/Core/DolphinQt/Config/CheatWarningWidget.cpp:43 #: Source/Core/DolphinQt/Config/GraphicsModWarningWidget.cpp:35 msgid "Configure Dolphin" msgstr "Dolphin 配置" #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:242 msgid "Configure Input" msgstr "配置输入" #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:242 msgid "Configure Output" msgstr "配置输出" #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:265 #: Source/Core/DolphinQt/ConvertDialog.cpp:283 #: Source/Core/DolphinQt/ConvertDialog.cpp:407 #: Source/Core/DolphinQt/GameList/GameList.cpp:647 #: Source/Core/DolphinQt/GameList/GameList.cpp:833 #: Source/Core/DolphinQt/MainWindow.cpp:951 #: Source/Core/DolphinQt/MainWindow.cpp:1740 #: Source/Core/DolphinQt/WiiUpdate.cpp:142 msgid "Confirm" msgstr "确定" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:198 msgid "Confirm backend change" msgstr "确认改变后端" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:178 msgid "Confirm on Stop" msgstr "停止游戏时确认" #: Source/Core/DolphinQt/MenuBar.cpp:1257 #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:498 #: Source/Core/DolphinQt/ResourcePackManager.cpp:240 msgid "Confirmation" msgstr "确认" #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:105 #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:205 msgid "Connect" msgstr "连接" #: Source/Core/Core/HotkeyManager.cpp:85 Source/Core/DolphinQt/MenuBar.cpp:320 msgid "Connect Balance Board" msgstr "连接平衡板" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:159 msgid "Connect USB Keyboard" msgstr "连接 USB 键盘" #: Source/Core/DolphinQt/MenuBar.cpp:312 msgid "Connect Wii Remote %1" msgstr "连接 Wii 遥控器 %1" #: Source/Core/Core/HotkeyManager.cpp:81 msgid "Connect Wii Remote 1" msgstr "连接 Wii 遥控器 1" #: Source/Core/Core/HotkeyManager.cpp:82 msgid "Connect Wii Remote 2" msgstr "连接 Wii 遥控器 2" #: Source/Core/Core/HotkeyManager.cpp:83 msgid "Connect Wii Remote 3" msgstr "连接 Wii 遥控器 3" #: Source/Core/Core/HotkeyManager.cpp:84 msgid "Connect Wii Remote 4" msgstr "连接 Wii 遥控器 4" #: Source/Core/DolphinQt/MenuBar.cpp:305 msgid "Connect Wii Remotes" msgstr "连接 Wii 遥控器" #: Source/Core/DolphinQt/Config/WiimoteControllersWidget.cpp:116 msgid "Connect Wii Remotes for Emulated Controllers" msgstr "作为模拟控制器来连接 Wii 遥控器" #: Source/Core/DolphinQt/WiiUpdate.cpp:143 msgid "Connect to the Internet and perform an online system update?" msgstr "是否连接到互联网并执行在线系统更新？" #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:89 msgid "Connected" msgstr "已连接" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:714 msgid "Connecting" msgstr "正在连接" #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:196 msgid "Connection Type:" msgstr "连接类型：" #: Source/Core/DiscIO/VolumeVerifier.cpp:1234 msgid "Content {0:08x} is corrupt." msgstr "内容 {0:08x} 已损坏。" #: Source/Core/DolphinQt/Config/WiimoteControllersWidget.cpp:113 msgid "Continuous Scanning" msgstr "持续扫描" #: Source/Core/Core/HotkeyManager.cpp:40 msgid "Control NetPlay Golf Mode" msgstr "控制联机高尔夫模式" #: Source/Core/Core/HW/GCPadEmu.cpp:55 #: Source/Core/DolphinQt/Config/Mapping/GCPadEmu.cpp:29 msgid "Control Stick" msgstr "控制摇杆" #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:454 msgid "Controller Profile" msgstr "控制器预设" #: Source/Core/Core/HotkeyManager.cpp:342 msgid "Controller Profile 1" msgstr "控制器预设 1" #: Source/Core/Core/HotkeyManager.cpp:343 msgid "Controller Profile 2" msgstr "控制器预设 2" #: Source/Core/Core/HotkeyManager.cpp:344 msgid "Controller Profile 3" msgstr "控制器预设 3" #: Source/Core/Core/HotkeyManager.cpp:345 msgid "Controller Profile 4" msgstr "控制器预设 4" #: Source/Core/DolphinQt/Config/ControllersWindow.cpp:16 msgid "Controller Settings" msgstr "控制器设置" #: Source/Core/DolphinQt/ToolBar.cpp:131 msgid "Controllers" msgstr "控制器" #: Source/Core/DolphinQt/Config/Graphics/ColorCorrectionConfigWindow.cpp:51 msgid "" "Controls the base luminance of a paper white surface in nits. Useful for " "adjusting to different environmental lighting conditions when using a HDR " "display.

HDR output is required for this setting to take effect." "

If unsure, leave this at 203." msgstr "" "控制 HDR 白色基本亮度（单位：尼特）。用于在使用 HDR 显示器时根据不同的环境照" "明条件进行亮度调整。

此设置需要 HDR 输出才能生效。" "

如无法确定，请将其保持为 203。" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:585 msgid "" "Controls the distance of the convergence plane. This is the distance at " "which virtual objects will appear to be in front of the screen.

A " "higher value creates stronger out-of-screen effects while a lower value is " "more comfortable." msgstr "" "控制会聚平面的距离。即虚拟物体看起来出现在屏幕前方的距离。

数值越高凸" "出屏幕效果越强，而数值越低观感会越舒适。" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:496 msgid "" "Controls the rendering resolution.

A high resolution greatly improves " "visual quality, but also greatly increases GPU load and can cause issues in " "certain games. Generally speaking, the lower the internal resolution, the " "better performance will be.

If unsure, select " "Native." msgstr "" "控制渲染的分辨率。

选择较高的分辨率将显著提高图像质量，但也将显著增加 " "GPU 负荷且可能在一些游戏中引起故障。一般而言，内部分辨率越低，性能将越高。" "

如无法确定，请选择“原生”。" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:582 msgid "" "Controls the separation distance between the virtual cameras.

A " "higher value creates a stronger feeling of depth while a lower value is more " "comfortable." msgstr "" "控制虚拟摄像机之间的分开距离。

数值越高则深度感会越强，而数值越低观感" "会越舒适。" #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:36 msgid "" "Controls whether or not Dual Core should be enabled. Can improve performance " "but can also cause issues. Defaults to True" msgstr "" "控制是否应启用双核心。可以提高性能但也可能造成问题。默认值为 True" #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:44 msgid "" "Controls whether or not the Memory Management Unit should be emulated fully. " "Few games require it." msgstr "控制是否应完整模拟内存管理单元。仅少数游戏需要。" #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:49 msgid "" "Controls whether to use high or low-level DSP emulation. Defaults to " "True" msgstr "控制使用高级还是低级 DSP 模拟。默认值为 True" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:658 msgid "Convergence" msgstr "会聚" #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:145 #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:222 msgid "Convergence:" msgstr "会聚：" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:291 #: Source/Core/DolphinQt/Settings/WiiPane.cpp:316 msgid "Conversion failed." msgstr "转换失败。" #: Source/Core/DolphinQt/ConvertDialog.cpp:44 msgid "Convert" msgstr "转换" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:268 #: Source/Core/DolphinQt/Settings/WiiPane.cpp:296 #: Source/Core/DolphinQt/Settings/WiiPane.cpp:316 msgid "Convert File to Folder Now" msgstr "立即将文件转换为文件夹" #: Source/Core/DolphinQt/GameList/GameList.cpp:419 msgid "Convert File..." msgstr "转换文件..." #: Source/Core/DolphinQt/Settings/WiiPane.cpp:267 #: Source/Core/DolphinQt/Settings/WiiPane.cpp:271 #: Source/Core/DolphinQt/Settings/WiiPane.cpp:291 msgid "Convert Folder to File Now" msgstr "立即将文件夹转换为文件" #: Source/Core/DolphinQt/GameList/GameList.cpp:383 msgid "Convert Selected Files..." msgstr "转换所选文件..." #: Source/Core/DolphinQt/ConvertDialog.cpp:79 msgid "Convert..." msgstr "转换..." #: Source/Core/DolphinQt/ConvertDialog.cpp:316 msgid "" "Converting Wii disc images to GCZ without removing junk data does not save " "any noticeable amount of space compared to converting to ISO. Do you want to " "continue anyway?" msgstr "" "与转换为 ISO 格式相比，在不移除垃圾数据的情况下将 Wii 光盘镜像转换为 GCZ 格式" "不会节省任何更明显的空间。是否仍要继续？" #: Source/Core/DolphinQt/ConvertDialog.cpp:434 #: Source/Core/DolphinQt/Settings/WiiPane.cpp:279 #: Source/Core/DolphinQt/Settings/WiiPane.cpp:304 msgid "Converting..." msgstr "正在转换..." #: Source/Core/DolphinQt/ConvertDialog.cpp:442 msgid "" "Converting...\n" "%1" msgstr "" "正在转换...\n" "%1" #: Source/Core/DolphinQt/Config/Graphics/ColorCorrectionConfigWindow.cpp:34 msgid "" "Converts the colors from the color spaces that GC/Wii were meant to work " "with to sRGB/Rec.709.

There's no way of knowing what exact color " "space games were meant for, given there were multiple standards and most " "games didn't acknowledge them, so it's not correct to assume a format from " "the game disc region. Just pick the one that looks more natural to you, or " "match it with the region the game was developed in.

HDR output is " "required to show all the colors from the PAL and NTSC-J color spaces." "

If unsure, leave this unchecked." msgstr "" "将颜色转换为 GC/Wii 所能使用的 sRGB/Rec.709 色彩空间。

考虑到存在多种" "标准并且大多数游戏不认可，因此无法知道游戏的确切色彩空间是什么 ，所以从游戏光" "盘区域假设一种格式是不正确的。只需选择对您来说更自然的格式，或将其与游戏开发" "地的区域相匹配。

需要 HDR 输出才能显示 PAL 和 NTSC-J 色彩空间的所有颜" "色。

如无法确定，请不要选中此项。" #: Source/Core/DolphinQt/Config/Graphics/ColorCorrectionConfigWindow.cpp:47 msgid "" "Converts the gamma from what the game targeted to what your current SDR " "display targets.
Monitors often target sRGB. TVs often target 2.2." "

If unsure, leave this unchecked." msgstr "" "将伽玛值从游戏标准转换为当前 SDR 显示标准。
显示器通常以 sRGB 为标准。电视" "通常以 2.2 为标准。

如无法确定，请不要选中此项。" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:292 #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:706 #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:735 #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:763 msgid "Copy" msgstr "复制" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:573 msgid "Copy &function" msgstr "复制函数(&F)" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:576 msgid "Copy &hex" msgstr "复制十六进制(&H)" #: Source/Core/DolphinQt/Debugger/MemoryViewWidget.cpp:885 msgid "Copy Address" msgstr "复制地址" #: Source/Core/DolphinQt/GCMemcardManager.cpp:641 msgid "Copy Failed" msgstr "复制失败" #: Source/Core/DolphinQt/Debugger/MemoryViewWidget.cpp:887 msgid "Copy Hex" msgstr "复制十六进制" #: Source/Core/DolphinQt/Debugger/MemoryViewWidget.cpp:890 msgid "Copy Value" msgstr "复制数值" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:575 msgid "Copy code &line" msgstr "复制代码行(&L)" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:582 msgid "Copy tar&get address" msgstr "复制目标地址(&G)" #: Source/Core/DolphinQt/GCMemcardManager.cpp:244 msgid "Copy to A" msgstr "复制到 A" #: Source/Core/DolphinQt/GCMemcardManager.cpp:244 msgid "Copy to B" msgstr "复制到 B" #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:208 #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:83 #: Source/Core/DolphinQt/Config/Mapping/HotkeyGBA.cpp:21 msgid "Core" msgstr "核心" #: Source/Core/DolphinQt/Config/Graphics/ColorCorrectionConfigWindow.cpp:64 msgid "Correct Color Space" msgstr "校正色彩空间" #: Source/Core/DolphinQt/Config/Graphics/ColorCorrectionConfigWindow.cpp:93 msgid "Correct SDR Gamma" msgstr "校正 SDR 伽玛" #. i18n: Performance cost, not monetary cost #: Source/Core/DolphinQt/Debugger/JITWidget.cpp:91 msgid "Cost" msgstr "开销" #: Source/Core/Core/NetPlayClient.cpp:176 #: Source/Core/Core/NetPlayClient.cpp:240 msgid "Could not communicate with host." msgstr "无法与主机通信。" #: Source/Core/Core/NetPlayClient.cpp:142 msgid "Could not create client." msgstr "无法创建客户端。" #: Source/Core/Core/NetPlayClient.cpp:156 msgid "Could not create peer." msgstr "无法创建对等点。" #: Source/Core/DolphinQt/WiiUpdate.cpp:49 msgid "" "Could not download update files from Nintendo. Please check your Internet " "connection and try again." msgstr "无法从任天堂下载更新文件。请检查你的互联网连接然后重试。" #: Source/Core/DolphinQt/WiiUpdate.cpp:44 msgid "" "Could not download update information from Nintendo. Please check your " "Internet connection and try again." msgstr "无法从任天堂下载更新信息。请检查你的互联网连接然后重试。" #: Source/Core/Core/IOS/USB/Bluetooth/BTReal.cpp:169 msgid "" "Could not find any usable Bluetooth USB adapter for Bluetooth Passthrough.\n" "\n" "The emulated console will now stop." msgstr "" "无法找到任何用于蓝牙直通的蓝牙 USB 适配器。\n" "\n" "模拟主机即将停止运行。" #: Source/Core/Core/IOS/USB/Bluetooth/BTReal.cpp:175 msgid "" "Could not find any usable Bluetooth USB adapter for Bluetooth Passthrough.\n" "The following error occurred when Dolphin tried to use an adapter:\n" "{0}\n" "\n" "The emulated console will now stop." msgstr "" "无法找到任何用于蓝牙直通的蓝牙 USB 适配器。\n" "当 Dolphin 尝试使用适配器时发生以下错误：\n" "{0}\n" "\n" "模拟主机即将停止运行。" #: Source/Core/DolphinQt/WiiUpdate.cpp:54 msgid "" "Could not install an update to the Wii system memory. Please refer to logs " "for more information." msgstr "无法安装更新到 Wii 系统存储。请参考日志获取更多信息。" #: Source/Core/Core/IOS/ES/ES.cpp:381 msgid "" "Could not launch IOS {0:016x} because it is missing from the NAND.\n" "The emulated software will likely hang now." msgstr "" "无法启动 IOS {0:016x} 因为 NAND 中没有该数据。\n" "已模拟运行的软件将可能挂起。" #: Source/Core/Core/IOS/ES/ES.cpp:416 msgid "" "Could not launch the Wii Menu because it is missing from the NAND.\n" "The emulated software will likely hang now." msgstr "" "无法启动 Wii 菜单，因为 NAND 中没有该内容。\n" "已模拟运行的软件将可能挂起。" #: Source/Core/Core/IOS/ES/ES.cpp:421 msgid "" "Could not launch title {0:016x} because it is missing from the NAND.\n" "The emulated software will likely hang now." msgstr "" "无法启动游戏 {0:016x} 因为 NAND 中没有该软件。\n" "已模拟运行的软件将可能挂起。" #: Source/Core/Core/Boot/Boot.cpp:283 Source/Core/Core/Boot/Boot.cpp:300 msgid "Could not recognize file {0}" msgstr "无法识别文件 {0}" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:273 msgid "Could not save your changes!" msgstr "无法保存您所做的更改！" #: Source/Core/UICommon/AutoUpdate.cpp:303 #: Source/Core/UICommon/AutoUpdate.cpp:309 msgid "Could not start updater process: {0}" msgstr "无法启动更新程序进程：{0}" #: Source/Core/Core/HW/GCMemcard/GCMemcardRaw.cpp:139 msgid "" "Could not write memory card file {0}.\n" "\n" "Are you running Dolphin from a CD/DVD, or is the save file maybe write " "protected?\n" "\n" "Are you receiving this after moving the emulator directory?\n" "If so, then you may need to re-specify your memory card location in the " "options." msgstr "" "无法写入存储卡文件 {0}。\n" "\n" "您是否正在从 CD/DVD 上运行 Dolphin，或者存档文件是否写保护?\n" "\n" "您是否是在移动模拟器目录后收到这个消息?\n" "如果是这样，您可能需要在选项中重新指定您的存储卡位置。" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:993 msgid "Couldn't look up central server" msgstr "无法查找中心服务器" #: Source/Core/DolphinQt/GCMemcardManager.cpp:829 msgid "Couldn't open file." msgstr "无法打开文件。" #: Source/Core/DolphinQt/GCMemcardManager.cpp:832 msgid "Couldn't read file." msgstr "无法读取文件。" #: Source/Core/DolphinQt/Config/InfoWidget.cpp:123 msgid "Country:" msgstr "国家：" #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:108 #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:244 #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:602 msgid "Create" msgstr "创建" #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:281 msgid "Create Infinity File" msgstr "创建 Infinity 文件" #: Source/Core/DolphinQt/GCMemcardCreateNewDialog.cpp:62 #: Source/Core/DolphinQt/GCMemcardCreateNewDialog.cpp:74 msgid "Create New Memory Card" msgstr "创建新存储卡" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:534 #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:637 msgid "Create Skylander File" msgstr "创建 Skylander 文件" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:83 msgid "Create Skylander Folder" msgstr "创建 Skylander 文件夹" #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:110 msgid "Create mappings for other devices" msgstr "为其他设备创建映射" #: Source/Core/DolphinQt/GCMemcardCreateNewDialog.cpp:45 msgid "Create..." msgstr "创建..." #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:342 msgid "" "Creates frame dumps and screenshots at the internal resolution of the " "renderer, rather than the size of the window it is displayed within." "

If the aspect ratio is widescreen, the output image will be scaled " "horizontally to preserve the vertical resolution." "

If unsure, leave this unchecked." msgstr "" "以渲染器的内部分辨率创建帧转储和屏幕截图，而不是其在窗口中显示的大小。" "

如果长宽比是宽屏，输出图像将会水平缩放以保持垂直分辨率。" "

如无法确定，请不要选中此项。" #: Source/Core/DolphinQt/Config/CheatCodeEditor.cpp:82 #: Source/Core/DolphinQt/Config/GeckoCodeWidget.cpp:117 msgid "Creator:" msgstr "创建者：" #: Source/Core/Common/MsgHandler.cpp:62 msgid "Critical" msgstr "错误" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:159 msgid "Crop" msgstr "裁切" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:362 msgid "" "Crops the picture from its native aspect ratio (which rarely exactly matches " "4:3 or 16:9), to the specific user target aspect ratio (e.g. 4:3 or 16:9)." "

If unsure, leave this unchecked." msgstr "" "将图像由原生长宽比（很少情况下与 4:3 或 16:9 完全匹配）裁切为用户特定的目标长" "宽比（例如 4:3 或 16:9）。

如无法确定，请不要选中此" "项。" #: Source/Core/Core/HW/WiimoteEmu/Extension/Turntable.cpp:82 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:175 msgid "Crossfade" msgstr "混音" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:166 msgid "Cull Vertices on the CPU" msgstr "清除 CPU 顶点" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:380 msgid "" "Cull vertices on the CPU to reduce the number of draw calls required. May " "affect performance and draw statistics.

If unsure, " "leave this unchecked." msgstr "" "清除 CPU 上的顶点以减少所需的绘制调用数。可能影响性能和绘制统计数据。" "

如无法确定，请不要选中此项。" #: Source/Core/DolphinQt/MenuBar.cpp:287 msgid "Current Region" msgstr "当前区域" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:590 msgid "Current Value" msgstr "当前值" #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:146 msgid "Current context" msgstr "当前上下文" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:211 msgid "Current game" msgstr "当前游戏" #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:149 msgid "Current thread" msgstr "当前线程" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:59 msgid "Custom" msgstr "自定义" #: Source/Core/DolphinQt/CheatSearchFactoryWidget.cpp:50 msgid "Custom Address Space" msgstr "自定义地址空间" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:308 msgid "Custom Aspect Ratio Height" msgstr "自定义长宽比宽度" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:307 msgid "Custom Aspect Ratio Width" msgstr "自定义长宽比长度" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:61 msgid "Custom Aspect Ratio:" msgstr "自定义长宽比：" #: Source/Core/DolphinQt/Settings/AdvancedPane.cpp:158 msgid "Custom RTC Options" msgstr "自定义 RTC 选项" #: Source/Core/DolphinQt/Config/Graphics/ColorCorrectionConfigWindow.cpp:102 msgid "Custom:" msgstr "自定义：" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:125 msgid "Customize" msgstr "自定义" #: Source/Core/Core/HW/GBAPadEmu.h:39 Source/Core/Core/HW/GCPadEmu.h:59 #: Source/Core/Core/HW/WiimoteEmu/Extension/Classic.h:223 #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.h:120 #: Source/Core/DolphinQt/Config/Mapping/GBAPadEmu.cpp:23 #: Source/Core/DolphinQt/Config/Mapping/GCPadEmu.cpp:26 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:51 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuGeneral.cpp:37 msgid "D-Pad" msgstr "十字键" #: Source/Core/Core/FifoPlayer/FifoDataFile.cpp:229 msgid "DFF file magic number is incorrect: got {0:08x}, expected {1:08x}" msgstr "DFF 文件幻数不正确：获取为 {0:08x}，应为 {1:08x}" #: Source/Core/Core/FifoPlayer/FifoDataFile.cpp:219 msgid "DFF file size is 0; corrupt/incomplete file?" msgstr "DFF 文件大小为 0；损坏或不完整的文件？" #: Source/Core/Core/HW/WiimoteEmu/Extension/Turntable.cpp:49 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:149 msgid "DJ Turntable" msgstr "打碟机" #: Source/Core/DolphinQt/Config/GamecubeControllersWidget.cpp:40 msgid "DK Bongos" msgstr "DK 小对鼓" #: Source/Core/DolphinQt/Settings/AudioPane.cpp:48 msgid "DSP Emulation Engine" msgstr "音频模拟引擎" #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:92 msgid "DSP HLE (fast)" msgstr "音频 HLE (较快)" #: Source/Core/DolphinQt/Settings/AudioPane.cpp:52 msgid "DSP HLE (recommended)" msgstr "音频 HLE （推荐）" #: Source/Core/DolphinQt/Settings/AudioPane.cpp:54 msgid "DSP LLE Interpreter (very slow)" msgstr "音频 LLE 解释器（很慢）" #: Source/Core/DolphinQt/Settings/AudioPane.cpp:53 msgid "DSP LLE Recompiler (slow)" msgstr "音频 LLE 重编译器（较慢）" #: Source/Core/DolphinQt/Config/ControllerInterface/ControllerInterfaceWindow.cpp:31 msgid "DSU Client" msgstr "DSU 客户端" #: Source/Core/DolphinQt/Config/ControllerInterface/DualShockUDPClientWidget.cpp:51 msgid "" "DSU protocol enables the use of input and motion data from compatible " "sources, like PlayStation, Nintendo Switch and Steam controllers.

For " "setup instructions, refer to this page." msgstr "" "通过 DSU 协议，可以使用相应来源如 PlayStation, Nintendo Switch 和 Steam 控制" "器的输入与体感数据。

配置方法参见此页。" #: Source/Core/DolphinQt/Config/GamecubeControllersWidget.cpp:39 msgid "Dance Mat" msgstr "跳舞毯" #. i18n: One of the elements in the Skylanders games. For official translations #. in other languages, check the SuperChargers manual at https://support.activision.com/manuals #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:365 msgid "Dark" msgstr "暗" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:138 msgid "Data" msgstr "数据" #: Source/Core/DolphinQt/Config/FilesystemWidget.cpp:145 msgid "Data Partition (%1)" msgstr "数据分区 (%1)" #: Source/Core/DolphinQt/NetPlay/ChunkedProgressDialog.cpp:46 msgid "Data Transfer" msgstr "数据传输" #: Source/Core/DolphinQt/CheatSearchFactoryWidget.cpp:88 msgid "Data Type" msgstr "数据类型" #: Source/Core/DolphinQt/GCMemcardManager.cpp:850 msgid "Data in area of file that should be unused." msgstr "文件中本应未被使用的区域存在数据。" #: Source/Core/DolphinQt/GCMemcardManager.cpp:867 msgid "Data in unrecognized format or corrupted." msgstr "数据格式无法识别或损坏。" #: Source/Core/DolphinQt/GCMemcardManager.cpp:378 msgid "Data inconsistency in GCMemcardManager, aborting action." msgstr "GC 存储卡管理器中的数据不一致，正在中止操作。" #: Source/Core/Core/NetPlayClient.cpp:1823 msgid "Data received!" msgstr "数据已接收！" #: Source/Core/DolphinQt/GCMemcardManager.cpp:403 msgid "Datel MaxDrive/Pro files" msgstr "Datel MaxDrive/Pro 文件" #: Source/Core/InputCommon/ControllerEmu/ControlGroup/ControlGroup.cpp:43 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/IMUGyroscope.cpp:37 msgid "Dead Zone" msgstr "死区" #: Source/Core/DolphinQt/Config/LogConfigWidget.cpp:49 msgid "Debug" msgstr "调试" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:81 #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:451 msgid "Debugging" msgstr "调试" #. i18n: The base 10 numeral system. Not related to non-integer numbers #: Source/Core/DolphinQt/Debugger/WatchWidget.cpp:93 msgid "Decimal" msgstr "十进制" #: Source/Core/DolphinQt/Settings/AudioPane.cpp:101 msgid "Decoding Quality:" msgstr "解码质量:" #: Source/Core/Core/FreeLookManager.cpp:97 msgid "Decrease" msgstr "减小" #: Source/Core/Core/HotkeyManager.cpp:128 msgid "Decrease Convergence" msgstr "减小会聚" #: Source/Core/Core/HotkeyManager.cpp:126 msgid "Decrease Depth" msgstr "减小深度" #: Source/Core/Core/HotkeyManager.cpp:46 msgid "Decrease Emulation Speed" msgstr "减小模拟速度" #. i18n: IR stands for internal resolution #: Source/Core/Core/HotkeyManager.cpp:119 msgid "Decrease IR" msgstr "减小内部分辨率" #: Source/Core/Core/HotkeyManager.cpp:183 msgid "Decrease Selected State Slot" msgstr "减少选定的状态插槽" #: Source/Core/Core/FreeLookManager.cpp:108 msgid "Decrease X" msgstr "减小 X" #: Source/Core/Core/FreeLookManager.cpp:110 msgid "Decrease Y" msgstr "减小 Y" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:113 #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:130 #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:155 msgid "Default" msgstr "默认" #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:176 msgid "Default Config (Read Only)" msgstr "默认配置 (只读)" #: Source/Core/DolphinQt/Settings/AudioPane.cpp:366 msgid "Default Device" msgstr "默认设备" #: Source/Core/DolphinQt/Config/LogWidget.cpp:138 msgid "Default Font" msgstr "默认字体" #: Source/Core/DolphinQt/Settings/PathPane.cpp:185 msgid "Default ISO:" msgstr "默认镜像：" #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:152 msgid "Default thread" msgstr "默认线程" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:186 msgid "Defer EFB Cache Invalidation" msgstr "推迟 EFB 缓存失效" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:55 msgid "Defer EFB Copies to RAM" msgstr "推迟 EFB 副本到内存" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:384 msgid "" "Defers invalidation of the EFB access cache until a GPU synchronization " "command is executed. If disabled, the cache will be invalidated with every " "draw call.

May improve performance in some games which rely on CPU " "EFB Access at the cost of stability.

If unsure, " "leave this unchecked." msgstr "" "将 EFB 访问缓存失效推迟至 GPU 同步指令执行时。如果禁用，每次绘制调用都将令缓" "存失效。

可能提高一些依靠 CPU EFB 访问游戏的性能，但会牺牲稳定性。" "

如无法确定，请不要选中此项。" #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:133 #: Source/Core/DolphinQt/Debugger/BreakpointWidget.cpp:112 #: Source/Core/DolphinQt/Debugger/WatchWidget.cpp:102 msgid "Delete" msgstr "删除" #: Source/Core/DolphinQt/GameList/GameList.cpp:489 msgid "Delete File..." msgstr "删除文件..." #: Source/Core/DolphinQt/GameList/GameList.cpp:394 msgid "Delete Selected Files..." msgstr "删除所选文件..." #: Source/Core/AudioCommon/WaveFile.cpp:38 #: Source/Core/VideoCommon/FrameDumpFFMpeg.cpp:140 msgid "Delete the existing file '{0}'?" msgstr "删除已经存在的文件 ‘{0}’ 吗?" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:655 msgid "Depth" msgstr "深度" #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:143 msgid "Depth Percentage:" msgstr "深度百分比:" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:220 msgid "Depth:" msgstr "深度：" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:590 #: Source/Core/DolphinQt/Config/ControllerInterface/DualShockUDPClientAddServerDialog.cpp:48 #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:233 #: Source/Core/DolphinQt/GameList/GameList.cpp:1003 #: Source/Core/DolphinQt/GameList/GameListModel.cpp:220 #: Source/Core/DolphinQt/MenuBar.cpp:655 #: Source/Core/DolphinQt/ResourcePackManager.cpp:92 msgid "Description" msgstr "说明" #: Source/Core/DolphinQt/Config/GeckoCodeWidget.cpp:118 #: Source/Core/DolphinQt/Config/InfoWidget.cpp:158 msgid "Description:" msgstr "说明：" #: Source/Core/DolphinQt/Config/GraphicsModListWidget.cpp:220 msgid "Description: %1" msgstr "说明：%1" #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:183 msgid "Detached" msgstr "分离的" #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:262 msgid "Detect" msgstr "检测" #: Source/Core/DolphinQt/MenuBar.cpp:1345 msgid "Detecting RSO Modules" msgstr "正在检测 RSO 模块" #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:118 msgid "Deterministic dual core:" msgstr "确定性双核:" #: Source/Core/DolphinQt/Settings/GeneralPane.cpp:200 msgid "Dev (multiple times a day)" msgstr "开发版（一天多次）" #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:100 msgid "Device" msgstr "设备" #. i18n: PID means Product ID (in the context of a USB device), not Process ID #: Source/Core/DolphinQt/Settings/USBDeviceAddToWhitelistDialog.cpp:102 msgid "Device PID (e.g., 0305)" msgstr "设备 PID (例如: 0305)" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:94 msgid "Device Settings" msgstr "设备设置" #. i18n: VID means Vendor ID (in the context of a USB device) #: Source/Core/DolphinQt/Settings/USBDeviceAddToWhitelistDialog.cpp:100 msgid "Device VID (e.g., 057e)" msgstr "设备 VID (例如: 057e)" #: Source/Core/DolphinQt/Settings/AudioPane.cpp:129 msgid "Device:" msgstr "设备:" #: Source/Core/DolphinQt/RiivolutionBootWidget.cpp:151 msgid "Did not recognize %1 as a valid Riivolution XML file." msgstr "无法将 %1 识别为有效的 Riivolution XML 文件。" #: Source/Core/DolphinQt/Debugger/CodeWidget.cpp:108 msgid "Diff" msgstr "差异" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:188 msgid "Dims the screen after five minutes of inactivity." msgstr "五分钟非活动状态后变暗屏幕。" #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:193 msgid "Direct Connection" msgstr "直接连接" #: Source/Core/VideoBackends/D3D/D3DMain.cpp:38 msgid "Direct3D 11" msgstr "Direct3D 11" #: Source/Core/DolphinQt/GBAWidget.cpp:387 msgid "Dis&connected" msgstr "断开连接(&C)" #: Source/Core/DolphinQt/Debugger/BreakpointWidget.cpp:406 #: Source/Core/DolphinQt/Debugger/BreakpointWidget.cpp:423 msgid "Disable" msgstr "禁用" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:109 msgid "Disable Bounding Box" msgstr "禁用边界框" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:158 msgid "Disable Copy Filter" msgstr "禁用复制过滤" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:108 msgid "Disable EFB VRAM Copies" msgstr "禁用 EFB VRAM 副本" #: Source/Core/Core/HotkeyManager.cpp:48 msgid "Disable Emulation Speed Limit" msgstr "禁用模拟速度限制" #: Source/Core/DolphinQt/MenuBar.cpp:864 msgid "Disable Fastmem" msgstr "禁用快速内存" #: Source/Core/DolphinQt/MenuBar.cpp:870 msgid "Disable Fastmem Arena" msgstr "禁用快速内存区" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:154 msgid "Disable Fog" msgstr "禁用雾化" #: Source/Core/DolphinQt/MenuBar.cpp:856 msgid "Disable JIT Cache" msgstr "禁用 JIT 缓存" #: Source/Core/DolphinQt/MenuBar.cpp:876 msgid "Disable Large Entry Points Map" msgstr "禁用超大入口端点映射" #: Source/Core/DolphinQt/RiivolutionBootWidget.cpp:214 msgid "Disabled" msgstr "禁用" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:278 msgid "" "Disables bounding box emulation.

This may improve GPU performance " "significantly, but some games will break.

If " "unsure, leave this checked." msgstr "" "禁用边界框模拟。

这可能显著提高 GPU 性能，但是一些游戏可能会停止运行。" "

如无法确定，请选中此项。" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:335 msgid "" "Disables the VRAM copy of the EFB, forcing a round-trip to RAM. Inhibits all " "upscaling.

If unsure, leave this unchecked." msgstr "" "禁用 VRAM 中的 EFB 副本，而强制从 RAM 中读取。所有放大将不可用。" "

如无法确定，请不要选中此项。" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:597 msgid "" "Disables the blending of adjacent rows when copying the EFB. This is known " "in some games as \"deflickering\" or \"smoothing\".

Disabling the " "filter has no effect on performance, but may result in a sharper image. " "Causes few graphical issues.

If unsure, leave this " "checked." msgstr "" "禁用复制 EFB 时相邻行间的混合。一些游戏称之为“抗闪烁”或“平滑”。

禁用此" "过滤器对性能没有影响，但会使图像更锐利，且很少导致图像问题。" "

如无法确定，请选中此项。" #: Source/Core/DolphinQt/Config/FilesystemWidget.cpp:97 msgid "Disc" msgstr "光盘" #: qtbase/src/gui/kernel/qplatformtheme.cpp:734 msgid "Discard" msgstr "丢弃" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:182 msgid "Display Type" msgstr "显示类型" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:236 msgid "Display values in Hex" msgstr "以十六进制显示值" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:257 msgid "" "Displays XFB copies as soon as they are created, instead of waiting for " "scanout.

Can cause graphical defects in some games if the game " "doesn't expect all XFB copies to be displayed. However, turning this setting " "on reduces latency.

If unsure, leave this unchecked." "" msgstr "" "在 XFB 副本创建后立即将其显示，而不是等待扫描输出。

在一些不将所有 " "XFB 副本用于显示的游戏中会导致图像瑕疵。然而开启此项可以降低延迟。" "

如无法确定，请不要选中此项。" #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Force.cpp:28 msgid "Distance" msgstr "距离" #. i18n: Refering to emulated wii remote swing movement. #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Force.cpp:32 msgid "Distance of travel from neutral position." msgstr "从中间位置移动的距离。" #: Source/Core/DolphinQt/Main.cpp:264 msgid "Do you authorize Dolphin to report information to Dolphin's developers?" msgstr "是否授权 Dolphin 向开发者报告信息?" #: Source/Core/DolphinQt/MainWindow.cpp:1741 msgid "Do you want to add \"%1\" to the list of Game Paths?" msgstr "是否要添加 \"%1\" 到游戏路径列表?" #: Source/Core/DolphinQt/MenuBar.cpp:1258 msgid "Do you want to clear the list of symbol names?" msgstr "你是否要清除符号名称列表？" #: Source/Core/DolphinQt/GCMemcardManager.cpp:659 #, c-format msgctxt "" msgid "Do you want to delete the %n selected save file(s)?" msgstr "是否要删除 %n 已选定的存档文件？" #: Source/Core/DolphinQt/MainWindow.cpp:955 msgid "Do you want to stop the current emulation?" msgstr "您确定是否停止当前模拟?" #: Source/Core/DolphinQt/NANDRepairDialog.cpp:86 msgid "Do you want to try to repair the NAND?" msgstr "你要尝试修复 NAND 吗？" #: Source/Core/DolphinQt/Settings/AudioPane.cpp:83 msgid "Dolby Pro Logic II Decoder" msgstr "杜比定向逻辑II解码器" #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:217 #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:228 msgid "Dolphin FIFO Log (*.dff)" msgstr "Dolphin FIFO 日志 (*.dff)" #: Source/Core/DolphinQt/RiivolutionBootWidget.cpp:344 msgid "Dolphin Game Mod Preset" msgstr "Dolphin 游戏模组预设" #: Source/Core/DolphinQt/MenuBar.cpp:1554 #: Source/Core/DolphinQt/MenuBar.cpp:1571 #: Source/Core/DolphinQt/MenuBar.cpp:1590 msgid "Dolphin Map File (*.map)" msgstr "Dolphin 映射文件 (*.map)" #: Source/Core/DolphinQt/MenuBar.cpp:75 msgid "Dolphin Signature CSV File" msgstr "Dolphin 签名 CSV 文件" #: Source/Core/DolphinQt/MenuBar.cpp:75 msgid "Dolphin Signature File" msgstr "Dolphin 签名文件" #: Source/Core/DolphinQt/MainWindow.cpp:1852 #: Source/Core/DolphinQt/MainWindow.cpp:1928 msgid "Dolphin TAS Movies (*.dtm)" msgstr "Dolphin TAS 电影 (*.dtm)" #: Source/Core/DolphinQt/ConvertDialog.cpp:327 msgid "" "Dolphin can't convert NKit files to non-NKit files. Converting an NKit file " "in Dolphin will result in another NKit file.\n" "\n" "If you want to convert an NKit file to a non-NKit file, you can use the same " "program as you originally used when converting the file to the NKit format.\n" "\n" "Do you want to continue anyway?" msgstr "" "Dolphin 无法将 NKit 文件转换为非 NKit 文件。在 Dolphin 中转换的 NKit 文件将生" "成为另一个 NKit 文件。\n" "\n" "如果要将 NKit 文件转换为非 NKit 文件，可以使用与最初将文件转换为 NKit 格式时" "所用的相同程序。\n" "\n" "无论如何还是要继续吗？" #: Source/Core/DolphinQt/GameList/GameList.cpp:281 msgid "" "Dolphin could not find any GameCube/Wii ISOs or WADs.\n" "Double-click here to set a games directory..." msgstr "" "Dolphin 无法找到任何 GameCube/Wii 镜像或 WAD 文件。\n" "双击这里设置一个游戏目录……" #: Source/Core/DolphinQt/ConvertDialog.cpp:529 msgid "Dolphin failed to complete the requested action." msgstr "Dolphin 未能完成请求的操作。" #. i18n: The word "free" in the standard phrase "free and open source" #. is "free" as in "freedom" - it refers to certain properties of the #. software's license, not the software's price. (It is true that Dolphin #. can be downloaded at no cost, but that's not what this message says.) #: Source/Core/DolphinQt/AboutDialog.cpp:64 msgid "Dolphin is a free and open-source GameCube and Wii emulator." msgstr "Dolphin 是一个免费开源的 GameCube/Wii 模拟器。" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:998 msgid "Dolphin is too old for traversal server" msgstr "Dolphin 版本太旧，穿透服务器不支持" #: Source/Core/DiscIO/VolumeVerifier.cpp:1383 msgid "" "Dolphin is unable to verify typical TGC files properly, since they are not " "dumps of actual discs." msgstr "Dolphin 无法正确验证典型的 TGC 文件，因为其不是真实光盘的转储。" #: Source/Core/DiscIO/VolumeVerifier.cpp:1376 msgid "Dolphin is unable to verify unlicensed discs." msgstr "Dolphin 无法验证未经授权的光盘。" #: Source/Core/DolphinQt/Settings/GeneralPane.cpp:223 msgid "" "Dolphin will use this for titles whose region cannot be determined " "automatically." msgstr "Dolphin 会将其用于无法自动确定区域的游戏。" #: Source/Core/DolphinQt/Config/CheatWarningWidget.cpp:73 msgid "Dolphin's cheat system is currently disabled." msgstr "Dolphin 的金手指系统当前已禁用。" #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:330 #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:352 msgid "Domain" msgstr "域名" #: Source/Core/DolphinQt/Settings/GeneralPane.cpp:200 msgid "Don't Update" msgstr "不更新" #: Source/Core/DolphinQt/NKitWarningDialog.cpp:56 msgid "Don't show this again" msgstr "不再显示" #: Source/Core/DiscIO/CompressedBlob.cpp:374 msgid "Done compressing disc image." msgstr "光盘镜像已压缩完成。" #. i18n: A light on the Shinkansen controller that lights up when the train doors are locked. #. Labeled 戸じめ (in Japanese) on the actual controller. #: Source/Core/Core/HW/WiimoteEmu/Extension/Shinkansen.cpp:55 msgid "Doors Locked" msgstr "门已锁上" #. i18n: A double precision floating point number #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:139 #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:199 #: Source/Core/DolphinQt/Debugger/RegisterWidget.cpp:155 msgid "Double" msgstr "双精度" #: Source/Core/Core/FreeLookManager.cpp:89 #: Source/Core/Core/HW/WiimoteEmu/Extension/Guitar.cpp:80 #: Source/Core/Core/HW/WiimoteEmu/Extension/Shinkansen.cpp:35 #: Source/Core/DolphinQt/ResourcePackManager.cpp:44 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Force.cpp:21 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/IMUAccelerometer.cpp:19 #: Source/Core/InputCommon/ControllerEmu/ControllerEmu.h:25 msgid "Down" msgstr "下" #: Source/Core/DolphinQt/Config/GeckoCodeWidget.cpp:91 msgid "Download Codes" msgstr "下载代码" #: Source/Core/DolphinQt/Config/GeckoCodeWidget.cpp:93 msgid "Download Codes from the WiiRD Database" msgstr "从 WiiRD 数据库中下载代码" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:158 msgid "Download Game Covers from GameTDB.com for Use in Grid Mode" msgstr "从 GameTDB.com 下载游戏封面以便在网格模式下使用" #: Source/Core/DolphinQt/Config/GeckoCodeWidget.cpp:384 msgid "Download complete" msgstr "下载完成" #: Source/Core/DolphinQt/Config/GeckoCodeWidget.cpp:385 msgid "Downloaded %1 codes. (added %2)" msgstr "已下载 %1 代码。(已添加 %2)" #. i18n: The "Drawsome" (combination of "Draw" and "Awesome") tablet wiimote extension by Ubisoft. #: Source/Core/Core/HW/WiimoteEmu/Extension/DrawsomeTablet.cpp:25 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:203 msgid "Drawsome Tablet" msgstr "Drawsome 绘图板" #: Source/Core/Core/HW/WiimoteEmu/Extension/Drums.cpp:56 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:73 msgid "Drum Kit" msgstr "架子鼓" #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:210 msgid "Dual Core" msgstr "双核" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:212 msgid "Dual View" msgstr "双视图" #: Source/Core/Core/HW/EXI/EXI_Device.h:94 msgid "Dummy" msgstr "虚设" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:260 msgid "Dump &ARAM" msgstr "转储副内存(&A)" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:259 msgid "Dump &ExRAM" msgstr "转储扩展内存(&E)" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:261 msgid "Dump &FakeVMEM" msgstr "转储伪显存(&F)" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:258 msgid "Dump &MRAM" msgstr "转储主内存(&M)" #: Source/Core/DolphinQt/MenuBar.cpp:825 msgid "Dump Audio" msgstr "转储音频" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:125 msgid "Dump Base Textures" msgstr "转储基本纹理" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:105 msgid "Dump EFB Target" msgstr "转储 EFB 目标" #: Source/Core/DolphinQt/MenuBar.cpp:819 msgid "Dump Frames" msgstr "转储帧" #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:380 msgid "Dump GameCube BBA traffic" msgstr "转储 GameCube BBA 流量" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:126 msgid "Dump Mip Maps" msgstr "转储 Mip 映射" #: Source/Core/DolphinQt/Settings/PathPane.cpp:202 msgid "Dump Path:" msgstr "转储路径:" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:106 msgid "Dump XFB Target" msgstr "转储 XFB 目标" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:138 msgid "Dump at Internal Resolution" msgstr "以内部分辨率转储" #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:375 msgid "Dump decrypted SSL reads" msgstr "转储解密的 SSL 读取" #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:376 msgid "Dump decrypted SSL writes" msgstr "转储解密的 SSL 写入" #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:369 msgid "Dump options" msgstr "转储选项" #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:379 msgid "Dump peer certificates" msgstr "转储对等证书" #. i18n: CA stands for certificate authority #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:378 msgid "Dump root CA certificates" msgstr "转储根 CA 证书" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:307 msgid "" "Dumps decoded game textures based on the other flags to User/Dump/Textures/" "<game_id>/.

If unsure, leave this unchecked." msgstr "" "根据其他标记将解码的游戏纹理转储到 User/Dump/Textures/<game_id>/ 目录" "中。

如无法确定，请不要选中此项。" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:329 msgid "" "Dumps the contents of EFB copies to User/Dump/Textures/." "

If unsure, leave this unchecked." msgstr "" "将 EFB 副本的内容转储到 User/Dump/Textures/ 目录中。" "

如无法确定，请不要选中此项。" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:332 msgid "" "Dumps the contents of XFB copies to User/Dump/Textures/." "

If unsure, leave this unchecked." msgstr "" "将 XFB 副本的内容转储到 User/Dump/Textures/ 目录中。" "

如无法确定，请不要选中此项。" #: Source/Core/DolphinQt/TAS/TASInputWindow.cpp:58 msgid "Duration of Turbo Button Press (frames):" msgstr "连发按键的按下持续时间（帧）：" #: Source/Core/DolphinQt/TAS/TASInputWindow.cpp:64 msgid "Duration of Turbo Button Release (frames):" msgstr "连发按键的松开持续时间（帧）：" #: Source/Core/DiscIO/Enums.cpp:95 #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:88 #: Source/Core/DolphinQt/Settings/WiiPane.cpp:174 msgid "Dutch" msgstr "荷兰语" #: Source/Core/DolphinQt/MenuBar.cpp:222 msgid "E&xit" msgstr "退出模拟(&X)" #: Source/Core/DolphinQt/FIFO/FIFOAnalyzer.cpp:178 msgid "EFB copy %1" msgstr "EFB 复制 %1" #: Source/Core/Core/HW/EXI/BBA/TAP_Win32.cpp:216 msgid "" "ERROR: This version of Dolphin requires a TAP-Win32 driver that is at least " "version {0}.{1} -- If you recently upgraded your Dolphin distribution, a " "reboot is probably required at this point to get Windows to see the new " "driver." msgstr "" "错误：此版本的 Dolphin 需要 {0}.{1} 或更高版本的 TAP-Win32 驱动——如果您最近升" "级您的 Dolphin 发行版，可能现在需要重新启动计算机以使 Windows 识别新驱动。" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:186 msgid "" "Each player sends their own inputs to the game, with equal buffer size for " "all players, configured by the host.\n" "Suitable for competitive games where fairness and minimal latency are most " "important." msgstr "" "每个玩家将自己的输入发送到游戏，并且所有玩家的缓冲区大小相同，由主机配置。\n" "适用于对公平性和低延迟最注重的竞技型游戏。" #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:124 msgid "Early Memory Updates" msgstr "内存提前更新" #. i18n: One of the elements in the Skylanders games. Japanese: 土. For official translations #. in other languages, check the SuperChargers manual at https://support.activision.com/manuals #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:352 msgid "Earth" msgstr "土" #: Source/Core/UICommon/NetPlayIndex.cpp:249 msgid "East Asia" msgstr "东亚" #: Source/Core/DolphinQt/Debugger/BreakpointDialog.cpp:40 #: Source/Core/DolphinQt/Debugger/BreakpointDialog.cpp:60 msgid "Edit Breakpoint" msgstr "编辑断点" #: Source/Core/DolphinQt/Debugger/BreakpointWidget.cpp:430 msgid "Edit..." msgstr "编辑..." #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:200 #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:201 msgid "Editor" msgstr "编辑器" #: Source/Core/Core/HW/WiimoteEmu/Extension/Turntable.cpp:79 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:160 msgid "Effect" msgstr "效果" #. i18n: One of the options shown below "Address Space". "Effective" addresses are the addresses #. used directly by the CPU and may be subject to translation via the MMU to physical addresses. #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:168 msgid "Effective" msgstr "有效" #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:185 msgid "Effective priority" msgstr "有效优先级" #: Source/Core/UICommon/UICommon.cpp:546 msgid "EiB" msgstr "EiB" #: Source/Core/Core/HotkeyManager.cpp:29 msgid "Eject Disc" msgstr "弹出光盘" #. i18n: Elements are a trait of Skylanders figures. For official translations of this term, #. check the Skylanders SuperChargers manual at https://support.activision.com/manuals #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:300 msgid "Element" msgstr "元素" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:45 msgid "Embedded Frame Buffer (EFB)" msgstr "内置帧缓冲 (EFB)" #: Source/Core/Core/State.cpp:633 msgid "Empty" msgstr "空" #: Source/Core/Core/Core.cpp:246 msgid "Emu Thread already running" msgstr "模拟线程已经在运行" #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:91 msgid "Emulate Disc Speed" msgstr "模拟光盘速度" #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:61 msgid "Emulate Infinity Base" msgstr "模拟 Infinity 底座" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:157 msgid "Emulate Skylander Portal" msgstr "模拟 Skylander 传送门" #: Source/Core/DolphinQt/Config/WiimoteControllersWidget.cpp:112 msgid "Emulate the Wii's Bluetooth adapter" msgstr "模拟 Wii 的蓝牙适配器" #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:41 msgid "" "Emulate the disc speed of real hardware. Disabling can cause instability. " "Defaults to True" msgstr "模拟实机的光盘速度。禁用可能会导致不稳定。默认启用" #: Source/Core/DolphinQt/MenuBar.cpp:237 msgid "Emulated USB Devices" msgstr "模拟 USB 设备" #: Source/Core/DolphinQt/Config/WiimoteControllersWidget.cpp:143 msgid "Emulated Wii Remote" msgstr "模拟 Wii 遥控器" #: Source/Core/Core/FifoPlayer/FifoDataFile.cpp:277 msgid "" "Emulated memory size mismatch!\n" "Current: MEM1 {0:08X} ({1} MiB), MEM2 {2:08X} ({3} MiB)\n" "DFF: MEM1 {4:08X} ({5} MiB), MEM2 {6:08X} ({7} MiB)" msgstr "" "模拟内存大小不匹配！\n" "当前: 内存 1 {0:08X} ({1} MiB)，内存 2 {2:08X} ({3} MiB)\n" "差异: 内存 1 {4:08X} ({5} MiB)，内存 2 {6:08X} ({7} MiB)" #: Source/Core/Core/HotkeyManager.cpp:335 #: Source/Core/DolphinQt/Config/Mapping/HotkeyGeneral.cpp:26 msgid "Emulation Speed" msgstr "模拟速度" #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:203 msgid "Emulation must be started before loading a file." msgstr "必须要开始模拟之后才能载入文件。" #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:164 msgid "Emulation must be started before saving a file." msgstr "必须要开始模拟之后才能保存文件。" #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:302 msgid "Emulation must be started to record." msgstr "必须要开始模拟才能录制。" #: Source/Core/DolphinQt/Config/ControllerInterface/DualShockUDPClientWidget.cpp:30 #: Source/Core/DolphinQt/Config/FreeLookWidget.cpp:36 #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:124 #: Source/Core/DolphinQt/Config/Mapping/MappingWidget.cpp:133 #: Source/Core/DolphinQt/Debugger/BreakpointWidget.cpp:406 #: Source/Core/DolphinQt/Debugger/BreakpointWidget.cpp:423 msgid "Enable" msgstr "启用" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:90 msgid "Enable API Validation Layers" msgstr "启用 API 验证层" #: Source/Core/DolphinQt/Achievements/AchievementSettingsWidget.cpp:101 msgid "Enable Achievement Badges" msgstr "启用成就徽章" #: Source/Core/DolphinQt/Achievements/AchievementSettingsWidget.cpp:64 msgid "Enable Achievements" msgstr "启用成就" #: Source/Core/DolphinQt/Settings/AudioPane.cpp:142 msgid "Enable Audio Stretching" msgstr "启用音频伸缩" #: Source/Core/DolphinQt/Settings/GeneralPane.cpp:149 msgid "Enable Cheats" msgstr "启用金手指" #: Source/Core/DolphinQt/TAS/TASInputWindow.cpp:53 msgid "Enable Controller Inpu&t" msgstr "启用控制器输入(&T)" #: Source/Core/DolphinQt/Settings/AdvancedPane.cpp:162 msgid "Enable Custom RTC" msgstr "启用自定义 RTC" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:159 msgid "Enable Debugging UI" msgstr "启用调试页面" #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:87 msgid "Enable Dual Core" msgstr "启用双核心" #: Source/Core/DolphinQt/Settings/GeneralPane.cpp:146 msgid "Enable Dual Core (speedup)" msgstr "启用双核心（加速）" #: Source/Core/DolphinQt/Settings/AdvancedPane.cpp:95 msgid "Enable Emulated CPU Clock Override" msgstr "启用模拟 CPU 频率覆盖" #: Source/Core/DolphinQt/Settings/AdvancedPane.cpp:125 msgid "Enable Emulated Memory Size Override" msgstr "启用模拟内存大小覆盖" #: Source/Core/DolphinQt/Achievements/AchievementSettingsWidget.cpp:106 msgid "Enable Encore Achievements" msgstr "启用硬核成就" #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:89 msgid "Enable FPRF" msgstr "启用 FPRF" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:109 msgid "Enable Graphics Mods" msgstr "启用图形模组" #: Source/Core/DolphinQt/Achievements/AchievementSettingsWidget.cpp:82 msgid "Enable Hardcore Mode" msgstr "启用硬核模式" #: Source/Core/DolphinQt/Achievements/AchievementSettingsWidget.cpp:84 msgid "" "Enable Hardcore Mode on RetroAchievements.

Hardcore Mode is intended " "to provide an experience as close to gaming on the original hardware as " "possible. RetroAchievements rankings are primarily oriented towards Hardcore " "points (Softcore points are tracked but not as heavily emphasized) and " "leaderboards require Hardcore Mode to be on.

To ensure this " "experience, the following features will be disabled, as they give emulator " "players an advantage over console players:
- Loading states
-- Saving " "states is allowed
- Emulator speeds below 100%
-- Frame advance is " "disabled
-- Turbo is allowed
- Cheats
- Memory patches
-- File " "patches are allowed
- Debug UI
- " "Freelook

This cannot be turned on while a game is " "playing.
Close your current game before enabling." "
Be aware that turning Hardcore Mode off while a game is running requires " "the game to be closed before re-enabling." msgstr "" "在 RetroAchievements 上启用硬核模式。

硬核模式旨在提供尽可能接近原始硬" "件的游戏体验。 RetroAchievements 排名主要面向硬核分数（会追踪休闲分数，但不那" "么强调），并且排行榜需要打开硬核模式。

为了确保这种体验，将禁用以下功" "能，因为会使模拟器玩家比主机玩家更具优势：
- 加载状态
-- 允许保存状态" "
- 模拟器速度低于 100%
-- 禁用帧步进
-- 允许加速
-- 金手指
-- " "内存补丁
-- 允许文件补丁
- 调试界面
- 自由视角" "

游戏运行时不能打开此功能。
启" "用前请关闭当前游戏。
请注意，在游戏运行时关闭硬核模式需要先关闭游戏，然后" "才能重新启用。" #: Source/Core/DolphinQt/Achievements/AchievementSettingsWidget.cpp:66 msgid "Enable Leaderboards" msgstr "启用排行榜" #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:88 #: Source/Core/DolphinQt/Settings/AdvancedPane.cpp:69 msgid "Enable MMU" msgstr "启用 MMU" #: Source/Core/DolphinQt/Achievements/AchievementSettingsWidget.cpp:96 msgid "Enable Progress Notifications" msgstr "启用成就进度通知" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:160 msgid "Enable Progressive Scan" msgstr "启用逐行扫描" #: Source/Core/DolphinQt/Achievements/AchievementSettingsWidget.cpp:49 msgid "Enable RetroAchievements.org Integration" msgstr "启用 RetroAchievements.org 集成" #: Source/Core/DolphinQt/Achievements/AchievementSettingsWidget.cpp:70 msgid "Enable Rich Presence" msgstr "启用详细状态信息" #: Source/Core/DolphinQt/Config/Mapping/GCPadWiiUConfigDialog.cpp:39 #: Source/Core/DolphinQt/Settings/WiiPane.cpp:352 msgid "Enable Rumble" msgstr "启用震动" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:157 msgid "Enable Screen Saver" msgstr "允许屏幕保护程序" #: Source/Core/DolphinQt/Config/WiimoteControllersWidget.cpp:115 msgid "Enable Speaker Data" msgstr "启用扬声器" #: Source/Core/DolphinQt/Achievements/AchievementSettingsWidget.cpp:76 msgid "Enable Unofficial Achievements" msgstr "启用非官方成就" #: Source/Core/DolphinQt/Settings/GeneralPane.cpp:237 msgid "Enable Usage Statistics Reporting" msgstr "启用使用情况统计报告" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:158 msgid "Enable WiiConnect24 via WiiLink" msgstr "通过 WiiLink 启用 WiiConnect24" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:85 msgid "Enable Wireframe" msgstr "启用线框" #: Source/Core/DolphinQt/Settings/AdvancedPane.cpp:83 msgid "Enable Write-Back Cache (slow)" msgstr "使用回写缓存 (慢速)" #: Source/Core/DolphinQt/Achievements/AchievementSettingsWidget.cpp:103 msgid "" "Enable achievement badges.

Displays icons for the player, game, and " "achievements. Simple visual option, but will require a small amount of extra " "memory and time to download the images." msgstr "" "启用成就徽章。

显示玩家、游戏和成就的图标。需要少量额外内存和时间来下" "载图像。" #: Source/Core/DolphinQt/Achievements/AchievementSettingsWidget.cpp:68 msgid "" "Enable competing in RetroAchievements leaderboards.

Hardcore Mode " "must be enabled to use." msgstr "" "允许在 RetroAchievements 排行榜中竞争。

必须启用硬核模式才能使用。" #: Source/Core/DolphinQt/Achievements/AchievementSettingsWidget.cpp:72 msgid "" "Enable detailed rich presence on the RetroAchievements website.

This " "provides a detailed description of what the player is doing in game to the " "website. If this is disabled, the website will only report what game is " "being played.

This has no bearing on Discord rich presence." msgstr "" "在 RetroAchievements 网站上启用详细的状态展示。

这向网站提供了玩家在游" "戏中所做操作的详细描述。如果禁用此功能，网站将仅报告正在玩的游戏。

这" "对 Discord 的详细状态没有影响。" #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:107 msgid "" "Enable emulated disc speed. Disabling this can cause crashes and other " "problems in some games. (ON = Compatible, OFF = Unlocked)" msgstr "" "启用模拟光盘速度。禁用此功能可能导致某些游戏出现崩溃和其他问题。(ON = 兼容，" "OFF = 未锁定)" #: Source/Core/DolphinQt/Achievements/AchievementSettingsWidget.cpp:51 msgid "" "Enable integration with RetroAchievements for earning achievements and " "competing in leaderboards.

Must log in with a RetroAchievements " "account to use. Dolphin does not save your password locally and uses an API " "token to maintain login." msgstr "" "启用集成 RetroAchievements，以获取成就并参与排行榜竞争。

必须使用 " "RetroAchievements 帐户登录才能使用。Dolphin 不会在本地保存您的密码，而是使用 " "API 令牌来维持登录。" #: Source/Core/DolphinQt/Achievements/AchievementSettingsWidget.cpp:98 msgid "" "Enable progress notifications on achievements.

Displays a brief popup " "message whenever the player makes progress on an achievement that tracks an " "accumulated value, such as 60 out of 120 stars." msgstr "" "启用成就进度通知。

每当玩家在需要累积值的成就上取得进展时，显示一条简" "短的弹出消息，例如已获得 120 颗星中的 60 颗星。" #: Source/Core/DolphinQt/Achievements/AchievementSettingsWidget.cpp:108 msgid "" "Enable unlocking achievements in Encore Mode.

Encore Mode re-enables " "achievements the player has already unlocked on the site so that the player " "will be notified if they meet the unlock conditions again, useful for custom " "speedrun criteria or simply for fun." msgstr "" "在硬核模式中启用解锁成就。

硬核模式会重新启用玩家已在网站上解锁的成" "就，以便玩家再次满足解锁条件时会收到通知，这对于自定义速通标准很有用或者只是" "为了好玩。" #: Source/Core/DolphinQt/Achievements/AchievementSettingsWidget.cpp:65 msgid "Enable unlocking achievements.
" msgstr "启用解锁成就。
" #: Source/Core/DolphinQt/Achievements/AchievementSettingsWidget.cpp:78 msgid "" "Enable unlocking unofficial achievements as well as official achievements." "

Unofficial achievements may be optional or unfinished achievements " "that have not been deemed official by RetroAchievements and may be useful " "for testing or simply for fun." msgstr "" "允许像官方成就一样解锁非官方成就。

非官方成就可能是可选的或未完成的成" "就，尚未被 RetroAchievements 视为官方成就，可能对测试有用或只是为了好玩。" #: Source/Core/DolphinQt/Settings/AudioPane.cpp:97 msgid "" "Enables Dolby Pro Logic II emulation using 5.1 surround. Certain backends " "only." msgstr "启用杜比定向逻辑II模拟5.1环绕声。仅适用于某些后端。" #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:102 msgid "" "Enables Floating Point Result Flag calculation, needed for a few games. (ON " "= Compatible, OFF = Fast)" msgstr "启用浮点结果标记运算，一些游戏需要。（开 = 兼容，关 = 快速）" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:603 msgid "" "Enables detection of arbitrary mipmaps, which some games use for special " "distance-based effects.

May have false positives that result in " "blurry textures at increased internal resolution, such as in games that use " "very low resolution mipmaps. Disabling this can also reduce stutter in games " "that frequently load new textures. This feature is not compatible with GPU " "Texture Decoding.

If unsure, leave this unchecked." msgstr "" "启用对非常规多级纹理的检测。一些游戏使用这一技术实现基于距离的特殊效果。" "

可能存在误判而导致高内部分辨率下的纹理模糊，例如在使用很低分辨率的多" "级纹理的游戏中。禁用此功能还可以在频繁加载新纹理的游戏中减少卡顿。此功能与 " "GPU 纹理解码不兼容。

如无法确定，请不要选中此项。" #: Source/Core/DolphinQt/Settings/AdvancedPane.cpp:85 msgid "" "Enables emulation of the CPU write-back cache.
Enabling will have a " "significant impact on performance.
This should be left disabled unless " "absolutely needed.

If unsure, leave this unchecked." "" msgstr "" "启用 CPU 回写缓存的模拟。
启用后将对性能产生重大影响。
如非必要，请保持" "禁用。

如无法确定，请不要选中此项。" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:370 msgid "" "Enables multithreaded command submission in backends where supported. " "Enabling this option may result in a performance improvement on systems with " "more than two CPU cores. Currently, this is limited to the Vulkan backend." "

If unsure, leave this checked." msgstr "" "在支持的后端中启用多线程指令提交。启用此选项可能会在两个以上 CPU 核心的系统中" "有性能提升。目前仅限于 Vulkan 后端。

如无法确定，请" "选中此项。" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:366 msgid "" "Enables progressive scan if supported by the emulated software. Most games " "don't have any issue with this.

If unsure, leave " "this unchecked." msgstr "" "启用逐行扫描模拟支持该特性的软件。对多数游戏无任何影响。" "

如无法确定，请不要选中此项。" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:611 msgid "" "Enables scRGB HDR output (if supported by your graphics backend and " "monitor). Fullscreen might be required.

This gives post process " "shaders more room for accuracy, allows \"AutoHDR\" post-process shaders to " "work, and allows to fully display the PAL and NTSC-J color spaces." "

Note that games still render in SDR internally." "

If unsure, leave this unchecked." msgstr "" "启用 scRGB HDR 输出（如果您的图形后端和显示器支持）。可能需要全屏。

这" "为后处理着色器提供了更多的准确性空间，允许“AutoHDR”后处理着色器工作，并允许完" "全显示 PAL 和 NTSC-J 色彩空间。

请注意，游戏仍然在内部以 SDR 渲染。" "

如无法确定，请不要选中此项。" #: Source/Core/DolphinQt/Settings/AudioPane.cpp:151 msgid "Enables stretching of the audio to match emulation speed." msgstr "对音频进行伸缩以匹配模拟速度" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:269 msgid "" "Enables texture decoding using the GPU instead of the CPU.

This may " "result in performance gains in some scenarios, or on systems where the CPU " "is the bottleneck.

This option is incompatible with Arbitrary Mipmap " "Detection.

If unsure, leave this unchecked." msgstr "" "启用 GPU 而非 CPU 进行纹理解码。

这将在某些场景下，或 CPU 成为瓶颈的系" "统中带来性能提升。

此选项与特殊多级纹理检测不兼容。" "

如无法确定，请不要选中此项。" #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:100 msgid "" "Enables the Memory Management Unit, needed for some games. (ON = Compatible, " "OFF = Fast)" msgstr "启用内存管理单元。一些游戏需要（开 = 兼容，关 = 快速）" #: Source/Core/DolphinQt/Settings/AdvancedPane.cpp:71 msgid "" "Enables the Memory Management Unit, needed for some games. (ON = Compatible, " "OFF = Fast)

If unsure, leave this unchecked." msgstr "" "启用内存管理单元，某些游戏需要启用此项。(开 = 兼容，关 = 快" "速)

如无法确定，请不要选中此项。" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:190 msgid "" "Enables the WiiLink service for WiiConnect24 channels.\n" "WiiLink is an alternate provider for the discontinued WiiConnect24 Channels " "such as the Forecast and Nintendo Channels\n" "Read the Terms of Service at: https://www.wiilink24.com/tos" msgstr "" "启用 WiiConnect24 频道的 WiiLink 服务。\n" "WiiLink 是已停服的 WiiConnect24 频道（例如 Forecast 和 Nintendo 频道）的替代" "提供商\n" "请阅读服务条款：https://www.wiilink24.com/tos" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:302 msgid "" "Enables validation of API calls made by the video backend, which may assist " "in debugging graphical issues. On the Vulkan and D3D backends, this also " "enables debug symbols for the compiled shaders.

If " "unsure, leave this unchecked." msgstr "" "启用由视频后端调用的 API 验证，这可以帮助调试图形问题。在 Vulkan 和 D3D 后" "端，这也为已编译的着色器启用调试符号。

如无法确定，" "请不要选中此项。" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:348 msgid "" "Encodes frame dumps using the FFV1 codec.

If " "unsure, leave this unchecked." msgstr "" "使用 FFV1 编解码器编码转储的帧。

如无法确定，请不要" "选中此项。" #. i18n: Character encoding #: Source/Core/DolphinQt/GCMemcardCreateNewDialog.cpp:43 msgid "Encoding" msgstr "编码" #: Source/Core/DolphinQt/GCMemcardManager.cpp:616 msgid "" "Encountered the following errors while opening save files:\n" "%1\n" "\n" "Aborting import." msgstr "" "打开存档文件时遇到以下错误：\n" " %1\n" "\n" " 正在中止导入。 " #: Source/Core/Core/NetPlayServer.cpp:126 msgid "Enet Didn't Initialize" msgstr "Enet 没有初始化" #: Source/Core/DiscIO/Enums.cpp:80 #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:86 #: Source/Core/DolphinQt/Settings/WiiPane.cpp:169 msgid "English" msgstr "英语" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:65 #: Source/Core/DolphinQt/Config/Graphics/GraphicsWindow.cpp:61 msgid "Enhancements" msgstr "增强" #: Source/Core/DolphinQt/Settings/BroadbandAdapterSettingsDialog.cpp:61 msgid "Enter IP address of device running the XLink Kai Client:" msgstr "输入正在运行 XLink Kai 客户端的设备 IP 地址：" #: Source/Core/DolphinQt/Settings/USBDeviceAddToWhitelistDialog.cpp:59 msgid "Enter USB device ID" msgstr "输入 USB 设备 ID" #: Source/Core/DolphinQt/Debugger/WatchWidget.cpp:275 msgid "Enter address to watch:" msgstr "输入要监视的地址：" #. i18n: MAC stands for Media Access Control. A MAC address uniquely identifies a network #. interface (physical) like a serial number. "MAC" should be kept in translations. #: Source/Core/DolphinQt/Settings/BroadbandAdapterSettingsDialog.cpp:39 msgid "Enter new Broadband Adapter MAC address:" msgstr "输入新宽带适配器 MAC 地址:" #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:301 msgid "Enter password" msgstr "输入密码" #: Source/Core/DolphinQt/Settings/BroadbandAdapterSettingsDialog.cpp:52 msgid "Enter the DNS server to use:" msgstr "输入要使用的 DNS 服务器：" #: Source/Core/DolphinQt/MenuBar.cpp:1317 msgid "Enter the RSO module address:" msgstr "请输入 RSO 模块地址:" #: Source/Core/DolphinQt/Config/CheatCodeEditor.cpp:194 #: Source/Core/DolphinQt/Config/CheatCodeEditor.cpp:250 #: Source/Core/DolphinQt/Config/FilesystemWidget.cpp:262 #: Source/Core/DolphinQt/Config/FilesystemWidget.cpp:386 #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:265 #: Source/Core/DolphinQt/Config/GeckoCodeWidget.cpp:357 #: Source/Core/DolphinQt/Config/GeckoCodeWidget.cpp:363 #: Source/Core/DolphinQt/Config/LogConfigWidget.cpp:46 #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:539 #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:255 #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:296 #: Source/Core/DolphinQt/Config/NewPatchDialog.cpp:229 #: Source/Core/DolphinQt/Config/NewPatchDialog.cpp:256 #: Source/Core/DolphinQt/ConvertDialog.cpp:426 #: Source/Core/DolphinQt/ConvertDialog.cpp:473 #: Source/Core/DolphinQt/ConvertDialog.cpp:528 #: Source/Core/DolphinQt/Debugger/AssembleInstructionDialog.cpp:105 #: Source/Core/DolphinQt/Debugger/BreakpointDialog.cpp:255 #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:637 #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:643 #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:652 #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:664 #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:683 #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:689 #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:704 #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:712 #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:736 #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:743 #: Source/Core/DolphinQt/Debugger/RegisterColumn.cpp:86 #: Source/Core/DolphinQt/Debugger/WatchWidget.cpp:282 #: Source/Core/DolphinQt/Debugger/WatchWidget.cpp:431 #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:239 #: Source/Core/DolphinQt/GBAWidget.cpp:578 #: Source/Core/DolphinQt/GCMemcardManager.cpp:347 #: Source/Core/DolphinQt/GCMemcardManager.cpp:377 #: Source/Core/DolphinQt/Main.cpp:211 Source/Core/DolphinQt/Main.cpp:227 #: Source/Core/DolphinQt/Main.cpp:234 Source/Core/DolphinQt/MainWindow.cpp:304 #: Source/Core/DolphinQt/MainWindow.cpp:312 #: Source/Core/DolphinQt/MainWindow.cpp:1131 #: Source/Core/DolphinQt/MainWindow.cpp:1534 #: Source/Core/DolphinQt/MainWindow.cpp:1541 #: Source/Core/DolphinQt/MainWindow.cpp:1601 #: Source/Core/DolphinQt/MainWindow.cpp:1608 #: Source/Core/DolphinQt/MainWindow.cpp:1719 #: Source/Core/DolphinQt/MenuBar.cpp:1220 #: Source/Core/DolphinQt/MenuBar.cpp:1301 #: Source/Core/DolphinQt/MenuBar.cpp:1324 #: Source/Core/DolphinQt/MenuBar.cpp:1338 #: Source/Core/DolphinQt/MenuBar.cpp:1370 #: Source/Core/DolphinQt/MenuBar.cpp:1394 #: Source/Core/DolphinQt/MenuBar.cpp:1615 #: Source/Core/DolphinQt/MenuBar.cpp:1626 #: Source/Core/DolphinQt/MenuBar.cpp:1638 #: Source/Core/DolphinQt/MenuBar.cpp:1660 #: Source/Core/DolphinQt/MenuBar.cpp:1686 #: Source/Core/DolphinQt/MenuBar.cpp:1740 #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:316 #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:479 #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:740 #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:982 #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:1105 #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:1115 #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:336 #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:342 #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:349 #: Source/Core/DolphinQt/RenderWidget.cpp:123 #: Source/Core/DolphinQt/ResourcePackManager.cpp:204 #: Source/Core/DolphinQt/ResourcePackManager.cpp:225 #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:433 #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:449 #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:470 #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:491 #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:535 #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:572 #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:595 #: Source/Core/DolphinQt/Translation.cpp:322 msgid "Error" msgstr "错误" #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:456 msgid "Error Log" msgstr "错误日志" #: Source/Core/DolphinQt/Config/Mapping/GCPadWiiUConfigDialog.cpp:75 msgid "Error Opening Adapter: %1" msgstr "打开适配器时出错: %1" #: Source/Core/Core/NetPlayServer.cpp:1503 msgid "Error collecting save data!" msgstr "收集存档数据时出错！" #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:262 #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:612 #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:619 msgid "Error converting value" msgstr "转换值时出错" #: Source/Core/DolphinQt/Translation.cpp:323 msgid "Error loading selected language. Falling back to system default." msgstr "加载选定语言错误。正在退回系统默认。" #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:210 msgid "Error obtaining session list: %1" msgstr "获取会话列表时出错: %1" #: Source/Core/DolphinQt/MainWindow.cpp:305 msgid "Error occurred while loading some texture packs" msgstr "加载一些纹理包时发生错误" #: Source/Core/Core/NetPlayClient.cpp:1852 msgid "Error processing codes." msgstr "处理代码时出错。" #: Source/Core/Core/NetPlayClient.cpp:1824 msgid "Error processing data." msgstr "处理数据时出错。" #: Source/Core/Core/NetPlayCommon.cpp:60 msgid "Error reading file: {0}" msgstr "读取文件时出错：{0}" #: Source/Core/Core/NetPlayServer.cpp:1539 msgid "Error synchronizing cheat codes!" msgstr "同步保存金手指代码时出错！" #: Source/Core/Core/NetPlayServer.cpp:1525 msgid "Error synchronizing save data!" msgstr "同步存档数据时出错！" #: Source/Core/Core/NetPlayCommon.cpp:214 msgid "Error writing file: {0}" msgstr "写入文件时出错：{0}" #: Source/Core/Common/ChunkFile.h:310 msgid "" "Error: After \"{0}\", found {1} ({2:#x}) instead of save marker {3} ({4:" "#x}). Aborting savestate load..." msgstr "" "错误：在 “{0}” 之后，发现了 {1} ({2:#x}) 而非存档标记 {3} ({4:#x})。正在中止" "加载即时存档..." #: Source/Core/Core/HW/GBACore.cpp:192 msgid "Error: GBA{0} failed to create core" msgstr "错误： GBA{0} 创建核心失败" #: Source/Core/Core/HW/GBACore.cpp:347 msgid "Error: GBA{0} failed to load the BIOS in {1}" msgstr "错误： GBA{0} 在 {1} 中加载 BIOS 失败" #: Source/Core/Core/HW/GBACore.cpp:212 msgid "Error: GBA{0} failed to load the ROM in {1}" msgstr "错误： GBA{0} 在 {1} 中加载 ROM 失败" #: Source/Core/Core/HW/GBACore.cpp:366 msgid "Error: GBA{0} failed to load the save in {1}" msgstr "错误： GBA{0} 在 {1} 中加载存档失败" #: Source/Core/Core/HW/GBACore.cpp:341 msgid "Error: GBA{0} failed to open the BIOS in {1}" msgstr "错误： GBA{0} 在 {1} 中打开 BIOS 失败" #: Source/Core/Core/HW/GBACore.cpp:182 msgid "Error: GBA{0} failed to open the ROM in {1}" msgstr "错误： GBA{0} 在 {1} 中打开 ROM 失败" #: Source/Core/Core/HW/GBACore.cpp:360 msgid "Error: GBA{0} failed to open the save in {1}" msgstr "错误： GBA{0} 在 {1} 中打开存档失败" #: Source/Core/Core/HW/SI/SI_Device.cpp:201 msgid "Error: This build does not support emulated GBA controllers" msgstr "错误：此版本不支持模拟 GBA 控制器" #: Source/Core/Core/HW/EXI/EXI_DeviceIPL.cpp:341 msgid "" "Error: Trying to access Shift JIS fonts but they are not loaded. Games may " "not show fonts correctly, or crash." msgstr "" "错误: 正在试图访问 Shift JIS 字体，但它们没有加载。游戏可能无法正确显示字体，" "或者崩溃。" #: Source/Core/Core/HW/EXI/EXI_DeviceIPL.cpp:336 msgid "" "Error: Trying to access Windows-1252 fonts but they are not loaded. Games " "may not show fonts correctly, or crash." msgstr "" "错误: 正在试图访问 Windows-1252 字体，但它们没有加载。游戏可能无法正确显示字" "体，或者崩溃。" #: Source/Core/DiscIO/VolumeVerifier.cpp:1332 msgid "Errors were found in {0} blocks in the {1} partition." msgstr "在 {1} 分区的 {0} 区块中发现错误。" #: Source/Core/DiscIO/VolumeVerifier.cpp:1343 msgid "Errors were found in {0} unused blocks in the {1} partition." msgstr "在 {1} 分区未使用的 {0} 区块中发现错误。" #. i18n: This button name refers to a gameplay element in DJ Hero #: Source/Core/Core/HW/WiimoteEmu/Extension/Turntable.cpp:64 msgid "Euphoria" msgstr "Euphoria" #: Source/Core/DiscIO/Enums.cpp:24 Source/Core/DolphinQt/MenuBar.cpp:289 #: Source/Core/UICommon/NetPlayIndex.cpp:249 msgid "Europe" msgstr "欧洲" #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:559 msgid "" "Example:\n" "You want to find a function that runs when HP is modified.\n" "1. Start recording and play the game without letting HP be modified, then " "press 'Code did not get executed'.\n" "2. Immediately gain/lose HP and press 'Code has been executed'.\n" "3. Repeat 1 or 2 to narrow down the results.\n" "Includes (Code has been executed) should have short recordings focusing on " "what you want.\n" "\n" "Pressing 'Code has been executed' twice will only keep functions that ran " "for both recordings. Hits will update to reflect the last recording's number " "of Hits. Total Hits will reflect the total number of times a function has " "been executed until the lists are cleared with Reset.\n" "\n" "Right click -> 'Set blr' will place a blr at the top of the symbol.\n" msgstr "" "例子：\n" "你想找到一个在修改 HP 时运行的函数。\n" "1. 在不修改 HP 的情况下开始录制并运行游戏，然后点“代码未执行”。\n" "2. 立即增加或减少 HP 并点“代码已执行”。\n" "3. 重复 1 或 2 以缩小结果范围。\n" "应该会（代码已执行后）出现较短的录制，这里面有你想要的。\n" "\n" "如点两次“代码已执行”将仅保留对两个录制运行的函数。命中数将更新以反映最后一个" "录制的命中数量。总命中数将反映一个函数执行的总次数，直到使用重置命令清除列" "表。\n" "\n" "右键单击 -> “设置 blr” 将在符号顶部放置一个 blr。\n" #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:266 #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:526 msgid "Excluded: %1" msgstr "已排除: %1" #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:81 msgid "Excluded: 0" msgstr "已排除: 0" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:124 msgid "Exclusive Ubershaders" msgstr "专用超着色器" #: Source/Core/Core/HotkeyManager.cpp:36 msgid "Exit" msgstr "退出" #: Source/Core/InputCommon/ControlReference/ExpressionParser.cpp:938 msgid "Expected + or closing paren." msgstr "建议用 + 号或右圆括号。" #: Source/Core/InputCommon/ControlReference/ExpressionParser.cpp:774 msgid "Expected arguments: " msgstr "建议参数：" #: Source/Core/InputCommon/ControlReference/ExpressionParser.cpp:905 msgid "Expected closing paren." msgstr "建议用右圆括号。" #: Source/Core/InputCommon/ControlReference/ExpressionParser.cpp:761 msgid "Expected comma." msgstr "建议用逗号。" #: Source/Core/InputCommon/ControlReference/ExpressionParser.cpp:693 msgid "Expected end of expression." msgstr "建议用表达式结束符。" #: Source/Core/InputCommon/ControlReference/ExpressionParser.cpp:924 msgid "Expected name of input." msgstr "建议使用的输入名称。" #: Source/Core/InputCommon/ControlReference/ExpressionParser.cpp:915 msgid "Expected opening paren." msgstr "建议用左圆括号。" #: Source/Core/InputCommon/ControlReference/ExpressionParser.cpp:835 msgid "Expected start of expression." msgstr "建议用表达式开始符。" #: Source/Core/InputCommon/ControlReference/ExpressionParser.cpp:815 msgid "Expected variable name." msgstr "建议使用的变量名称。" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:181 msgid "Experimental" msgstr "实验性" #: Source/Core/DolphinQt/MenuBar.cpp:303 msgid "Export All Wii Saves" msgstr "导出所有 Wii 存档" #: Source/Core/DolphinQt/GCMemcardManager.cpp:423 #: Source/Core/DolphinQt/GCMemcardManager.cpp:448 #: Source/Core/DolphinQt/GCMemcardManager.cpp:493 #: Source/Core/DolphinQt/GCMemcardManager.cpp:500 msgid "Export Failed" msgstr "导出失败" #: Source/Core/Core/HotkeyManager.cpp:57 msgid "Export Recording" msgstr "导出录制" #: Source/Core/DolphinQt/MenuBar.cpp:763 msgid "Export Recording..." msgstr "导出录制..." #: Source/Core/DolphinQt/GCMemcardManager.cpp:438 msgid "Export Save File" msgstr "导出存档文件" #: Source/Core/DolphinQt/GCMemcardManager.cpp:455 msgid "Export Save Files" msgstr "导出存档文件" #: Source/Core/DolphinQt/GameList/GameList.cpp:474 msgid "Export Wii Save" msgstr "导出 Wii 存档" #: Source/Core/DolphinQt/GameList/GameList.cpp:390 msgid "Export Wii Saves" msgstr "导出 Wii 存档" #: Source/Core/DolphinQt/GCMemcardManager.cpp:118 msgid "Export as .&gcs..." msgstr "导出为 .gcs...(&G)" #: Source/Core/DolphinQt/GCMemcardManager.cpp:119 msgid "Export as .&sav..." msgstr "导出为 .sav...(&S)" #: Source/Core/DolphinQt/MenuBar.cpp:1145 #, c-format msgctxt "" msgid "Exported %n save(s)" msgstr "已导出 %n 个存档" #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.cpp:269 #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:434 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuGeneral.cpp:47 msgid "Extension" msgstr "扩展" #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.h:121 msgid "Extension Motion Input" msgstr "扩展体感输入" #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.h:122 msgid "Extension Motion Simulation" msgstr "扩展体感模拟" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:522 msgid "External" msgstr "外部" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:87 msgid "External Frame Buffer (XFB)" msgstr "外部帧缓冲 (XFB)" #: Source/Core/DolphinQt/MenuBar.cpp:278 msgid "Extract Certificates from NAND" msgstr "从 NAND 中提取证书" #: Source/Core/DolphinQt/Config/FilesystemWidget.cpp:269 msgid "Extract Entire Disc..." msgstr "提取整个光盘..." #: Source/Core/DolphinQt/Config/FilesystemWidget.cpp:293 msgid "Extract Entire Partition..." msgstr "提取整个分区..." #: Source/Core/DolphinQt/Config/FilesystemWidget.cpp:300 msgid "Extract File..." msgstr "提取文件..." #: Source/Core/DolphinQt/Config/FilesystemWidget.cpp:242 msgid "Extract Files..." msgstr "提取文件..." #: Source/Core/DolphinQt/Config/FilesystemWidget.cpp:252 msgid "Extract System Data..." msgstr "提取系统数据" #: Source/Core/DolphinQt/Config/FilesystemWidget.cpp:356 msgid "Extracting All Files..." msgstr "正在提取所有文件..." #: Source/Core/DolphinQt/Config/FilesystemWidget.cpp:357 msgid "Extracting Directory..." msgstr "正在提取目录..." #. i18n: FD stands for file descriptor (and in this case refers to sockets, not regular files) #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:330 msgid "FD" msgstr "文件描述符" #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:39 #: Source/Core/DolphinQt/MenuBar.cpp:235 msgid "FIFO Player" msgstr "FIFO 回放器" #: Source/Core/DolphinQt/RiivolutionBootWidget.cpp:150 msgid "Failed loading XML." msgstr "加载 XML 文件失败。" #: Source/Core/DolphinQt/GCMemcardManager.cpp:348 msgid "" "Failed opening memory card:\n" "%1" msgstr "" "打开存储卡失败：\n" "%1" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:456 msgid "Failed to add this session to the NetPlay index: %1" msgstr "无法将此会话添加到联机索引: %1" #: Source/Core/DolphinQt/MenuBar.cpp:1687 msgid "Failed to append to signature file '%1'" msgstr "附加到签名文件 '%1' 失败" #: Source/Core/Core/IOS/USB/Bluetooth/BTReal.cpp:669 msgid "Failed to claim interface for BT passthrough: {0}" msgstr "申请蓝牙直通接口失败: {0}" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:675 msgid "Failed to clear Skylander!" msgstr "清除 Skylander 失败！" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:676 msgid "Failed to clear the Skylander from slot(%1)!" msgstr "清除插槽 (%1) 的 Skylander 失败！" #: Source/Core/DiscIO/VolumeVerifier.cpp:108 msgid "Failed to connect to Redump.org" msgstr "连接 Redump.org 失败" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:983 msgid "Failed to connect to server: %1" msgstr "连接服务器失败: %1" #: Source/Core/VideoBackends/D3D/D3DMain.cpp:154 #: Source/Core/VideoBackends/D3D12/VideoBackend.cpp:129 msgid "Failed to create D3D swap chain" msgstr "创建 D3D 交换链失败" #: Source/Core/VideoBackends/D3D12/VideoBackend.cpp:111 msgid "Failed to create D3D12 context" msgstr "创建 D3D12 上下文失败" #: Source/Core/VideoBackends/D3D12/VideoBackend.cpp:120 msgid "Failed to create D3D12 global resources" msgstr "创建 D3D12 全局资源失败" #: Source/Core/VideoBackends/D3D/D3DBase.cpp:60 msgid "Failed to create DXGI factory" msgstr "创建 DXGI 工厂失败" #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:291 msgid "Failed to create Infinity file" msgstr "创建 Infinity 文件失败" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:797 msgid "Failed to create Skylander file!" msgstr "创建 Skylander 文件失败！" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:798 msgid "" "Failed to create Skylander file:\n" "%1\n" "(Skylander may already be on the portal)" msgstr "" "创建 Skylander 文件失败：\n" "%1\n" "（此 Skylander 可能已在传送门上）" #: Source/Core/Core/NetPlayClient.cpp:1292 msgid "" "Failed to delete NetPlay GBA{0} save file. Verify your write permissions." msgstr "删除联机 GBA{0} 存档文件失败。请验证你的写入权限。" #: Source/Core/Core/NetPlayClient.cpp:1082 msgid "Failed to delete NetPlay memory card. Verify your write permissions." msgstr "删除联机存储卡失败。请验证你的写入权限。" #: Source/Core/DolphinQt/GameList/GameList.cpp:859 msgid "Failed to delete the selected file." msgstr "无法删除所选文件。" #: Source/Core/Core/IOS/USB/Bluetooth/BTReal.cpp:662 msgid "Failed to detach kernel driver for BT passthrough: {0}" msgstr "分离蓝牙直通内核驱动失败: {0}" #: Source/Core/DolphinQt/Config/GeckoCodeWidget.cpp:357 msgid "Failed to download codes." msgstr "下载代码失败。" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:737 msgid "Failed to dump %1: Can't open file" msgstr "转储 %1 失败：无法打开文件" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:744 msgid "Failed to dump %1: Failed to write to file" msgstr "转储 %1 失败：无法写入文件" #: Source/Core/DolphinQt/GCMemcardManager.cpp:489 msgctxt "" msgid "Failed to export %n out of %1 save file(s)." msgstr "在 %1 个存档文件中 %n 个导出失败。" #: Source/Core/DolphinQt/GameList/GameList.cpp:589 msgid "Failed to export the following save files:" msgstr "导出以下存档文件失败：" #: Source/Core/DolphinQt/MenuBar.cpp:1220 msgid "Failed to extract certificates from NAND" msgstr "从 NAND 中提取证书失败" #: Source/Core/DolphinQt/Config/FilesystemWidget.cpp:386 msgid "Failed to extract file." msgstr "提取文件失败。" #: Source/Core/DolphinQt/Config/FilesystemWidget.cpp:262 msgid "Failed to extract system data." msgstr "提取系统数据失败。" #: Source/Core/Core/HW/GCMemcard/GCMemcardDirectory.cpp:655 msgid "" "Failed to find new filename.\n" "{0}\n" " will be overwritten" msgstr "" "查找新的文件名失败。 \n" "{0} \n" "将会被覆盖" #: Source/Core/VideoBackends/D3DCommon/D3DCommon.cpp:55 msgid "Failed to find one or more D3D symbols" msgstr "无法找到一个或多个 D3D 符号" #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:224 msgid "Failed to find or open file: %1" msgstr "查找或打开文件失败：%1" #: Source/Core/DolphinQt/GCMemcardManager.cpp:566 msgid "Failed to import \"%1\"." msgstr "导入 \"%1\" 失败。" #: Source/Core/DolphinQt/MenuBar.cpp:1121 msgid "" "Failed to import save file. Please launch the game once, then try again." msgstr "导入存档文件失败。请运行一次游戏，然后重试。" #: Source/Core/DolphinQt/MenuBar.cpp:1115 msgid "" "Failed to import save file. The given file appears to be corrupted or is not " "a valid Wii save." msgstr "导入存档文件失败。给定的文件似乎已损坏或不是有效的 Wii 存档。" #: Source/Core/DolphinQt/MenuBar.cpp:1128 msgid "" "Failed to import save file. Your NAND may be corrupt, or something is " "preventing access to files within it. Try repairing your NAND (Tools -> " "Manage NAND -> Check NAND...), then import the save again." msgstr "" "导入存档文件失败。您的 NAND 可能已损坏，或某些因素阻止访问里面的文件。请尝试" "修复 NAND（工具 -> 管理 NAND -> 校验 NAND...），然后再次导入存档。" #: Source/Core/DolphinQt/MainWindow.cpp:1131 msgid "Failed to init core" msgstr "初始化核心失败" #: Source/Core/VideoBackends/D3D/D3DBase.cpp:117 msgid "" "Failed to initialize Direct3D.\n" "Make sure your video card supports at least D3D 10.0\n" "{0}" msgstr "" "初始化 Direct3D 失败。\n" "请确保你的显卡至少支持 D3D 10.0\n" "{0}" #: Source/Core/VideoCommon/VideoBackendBase.cpp:375 msgid "Failed to initialize renderer classes" msgstr "初始化渲染器类失败" #: Source/Core/DolphinQt/ResourcePackManager.cpp:205 msgid "Failed to install pack: %1" msgstr "安装包失败: %1" #: Source/Core/DolphinQt/GameList/GameList.cpp:633 #: Source/Core/DolphinQt/MenuBar.cpp:1086 msgid "Failed to install this title to the NAND." msgstr "无法将该游戏安装到 NAND。" #: Source/Core/DolphinQt/MainWindow.cpp:1636 msgid "" "Failed to listen on port %1. Is another instance of the NetPlay server " "running?" msgstr "监听端口 %1 失败。是否有另一个联机服务器的实例正在运行？" #: Source/Core/DolphinQt/MenuBar.cpp:1338 #: Source/Core/DolphinQt/MenuBar.cpp:1394 msgid "Failed to load RSO module at %1" msgstr "无法在 %1 处加载 RSO 模块" #: Source/Core/VideoBackends/D3D/D3DBase.cpp:46 msgid "Failed to load d3d11.dll" msgstr "载入 d3d11.dll 失败" #: Source/Core/VideoBackends/D3DCommon/D3DCommon.cpp:38 msgid "Failed to load dxgi.dll" msgstr "载入 dxgi.dll 失败" #: Source/Core/DolphinQt/MenuBar.cpp:1626 msgid "Failed to load map file '%1'" msgstr "载入映射文件 '%1' 失败" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:841 msgid "Failed to load the Skylander file!" msgstr "载入 Skylander 文件失败！" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:842 msgid "Failed to load the Skylander file(%1)!\n" msgstr "载入 Skylander 文件 (%1) 失败！\n" #: Source/Core/Core/Boot/Boot.cpp:590 msgid "Failed to load the executable to memory." msgstr "加载可执行文件到内存失败。" #: Source/Core/VideoBackends/D3DCommon/D3DCommon.cpp:44 msgid "" "Failed to load {0}. If you are using Windows 7, try installing the KB4019990 " "update package." msgstr "加载 {0} 失败。如果你使用的是 Windows 7，请尝试安装 KB4019990 更新包。" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:662 msgid "Failed to modify Skylander!" msgstr "修改 Skylander 失败！" #: Source/Core/DolphinQt/GBAWidget.cpp:578 #: Source/Core/DolphinQt/MainWindow.cpp:1719 #: Source/Core/DolphinQt/RenderWidget.cpp:123 msgid "Failed to open '%1'" msgstr "无法打开 '%1'" #: Source/Core/Core/IOS/USB/Bluetooth/BTReal.cpp:647 msgid "Failed to open Bluetooth device: {0}" msgstr "打开蓝牙设备失败: {0} " #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:124 msgid "Failed to open config file!" msgstr "打开配置文件失败！" #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:731 msgid "Failed to open file" msgstr "打开文件失败" #: Source/Core/Core/NetPlayCommon.cpp:26 msgid "Failed to open file \"{0}\"." msgstr "打开文件 “{0}” 失败。" #: Source/Core/Core/NetPlayCommon.cpp:184 msgid "Failed to open file \"{0}\". Verify your write permissions." msgstr "打开文件 “{0}” 失败。请验证你的写入权限。" #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:266 msgid "" "Failed to open file in external editor.\n" "Make sure there's an application assigned to open INI files." msgstr "" "无法在外部编辑器中打开文件。\n" "请确保已关联了应用程序来打开 INI 文件。" #: Source/Core/DolphinQt/GCMemcardManager.cpp:863 msgid "Failed to open file." msgstr "打开文件失败。" #: Source/Core/DolphinQt/MainWindow.cpp:1635 msgid "Failed to open server" msgstr "打开服务器失败" #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:166 msgid "Failed to open the Infinity file!" msgstr "打开 Infinity 文件失败！" #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:167 msgid "" "Failed to open the Infinity file(%1)!\n" "File may already be in use on the base." msgstr "" "打开 Infinity 文件 (%1) 失败！\n" "此 Skylander 可能已在传送门上。" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:817 msgid "Failed to open the Skylander file!" msgstr "打开 Skylander 文件失败！" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:818 msgid "" "Failed to open the Skylander file(%1)!\n" "File may already be in use on the portal." msgstr "" "打开 Skylander 文件 (%1) 失败！\n" "此 Skylander 可能已在传送门上。" #: Source/Core/DolphinQt/ConvertDialog.cpp:474 msgid "Failed to open the input file \"%1\"." msgstr "打开输入文件 \"%1\" 失败。" #: Source/Core/DiscIO/CompressedBlob.cpp:287 Source/Core/DiscIO/FileBlob.cpp:58 #: Source/Core/DiscIO/WIABlob.cpp:2043 msgid "" "Failed to open the output file \"{0}\".\n" "Check that you have permissions to write the target folder and that the " "media can be written." msgstr "" "无法打开输出文件 “{0}”。\n" "请检查是否有权限写入目标文件夹并且该媒体能够被写入。" #: Source/Core/DiscIO/VolumeVerifier.cpp:220 #: Source/Core/DiscIO/VolumeVerifier.cpp:319 msgid "Failed to parse Redump.org data" msgstr "解析 Redump.org 数据失败" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:299 msgid "Failed to parse given value into target data type." msgstr "将给定值解析为目标数据类型失败。" #: Source/Core/Core/FifoPlayer/FifoDataFile.cpp:213 msgid "Failed to read DFF file." msgstr "读取 DFF 文件失败。" #: Source/Core/DolphinQt/GCMemcardManager.cpp:865 msgid "Failed to read from file." msgstr "从文件读取失败。" #: Source/Core/DiscIO/CompressedBlob.cpp:378 Source/Core/DiscIO/FileBlob.cpp:98 #: Source/Core/DiscIO/WIABlob.cpp:2058 msgid "Failed to read from the input file \"{0}\"." msgstr "从输入文件 “{0}” 读取失败。" #: Source/Core/DolphinQt/GCMemcardManager.cpp:424 #: Source/Core/DolphinQt/GCMemcardManager.cpp:642 msgid "Failed to read selected savefile(s) from memory card." msgstr "从存储卡读取所选的存档文件失败。" #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:175 msgid "Failed to read the Infinity file!" msgstr "读取 Infinity 文件失败！" #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:176 msgid "" "Failed to read the Infinity file(%1)!\n" "File was too small." msgstr "" "读取 Infinity 文件 (%1) 失败！\n" "文件过小。" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:827 msgid "Failed to read the Skylander file!" msgstr "读取 Skylander 文件失败！" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:828 msgid "" "Failed to read the Skylander file(%1)!\n" "File was too small." msgstr "" "读取 Skylander 文件 (%1) 失败！\n" "文件过小。" #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:732 msgid "" "Failed to read the contents of file\n" "\n" "\"%1\"" msgstr "" "读取文件内容失败\n" "\n" "\"%1\"" #: Source/Core/Core/Movie.cpp:1015 msgid "Failed to read {0}" msgstr "读取 {0} 失败" #: Source/Core/DolphinQt/GCMemcardManager.cpp:669 msgid "Failed to remove file." msgstr "移除文件失败。" #: Source/Core/DolphinQt/ConvertDialog.cpp:455 msgid "" "Failed to remove junk data from file \"%1\".\n" "\n" "Would you like to convert it without removing junk data?" msgstr "" "从文件 \"%1\" 中移除垃圾数据失败。\n" "\n" "是否要在不移除垃圾数据的情况下进行转换？" #: Source/Core/DolphinQt/GameList/GameList.cpp:663 msgid "Failed to remove this title from the NAND." msgstr "将该游戏从 NAND 中移除失败。" #: Source/Core/Core/NetPlayClient.cpp:1106 msgid "Failed to reset NetPlay GCI folder. Verify your write permissions." msgstr "重置联机 GCI 文件夹失败。请验证你的写入权限。" #: Source/Core/Core/NetPlayClient.cpp:1137 msgid "Failed to reset NetPlay NAND folder. Verify your write permissions." msgstr "重置联机 NAND 文件夹失败。请验证你的写入权限。" #: Source/Core/Core/NetPlayClient.cpp:1143 msgid "Failed to reset NetPlay redirect folder. Verify your write permissions." msgstr "重置联机重定向文件夹失败。请验证你的写入权限。" #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:239 msgid "Failed to save FIFO log." msgstr "保存 FIFO 日志失败。" #: Source/Core/DolphinQt/MenuBar.cpp:1616 msgid "Failed to save code map to path '%1'" msgstr "保存代码映射到路径 '%1' 失败" #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:178 msgid "Failed to save file to: %1" msgstr "保存文件失败：%1" #: Source/Core/DolphinQt/MenuBar.cpp:1660 msgid "Failed to save signature file '%1'" msgstr "保存签名文件 '%1' 失败" #: Source/Core/DolphinQt/MenuBar.cpp:1639 msgid "Failed to save symbol map to path '%1'" msgstr "保存符号映射到路径 '%1' 失败" #: Source/Core/DolphinQt/MenuBar.cpp:1741 msgid "Failed to save to signature file '%1'" msgstr "保存到签名文件 '%1' 失败" #: Source/Core/Core/Core.cpp:538 msgid "" "Failed to sync SD card with folder. All changes made this session will be " "discarded on next boot if you do not manually re-issue a resync in Config > " "Wii > SD Card Settings > Convert File to Folder Now!" msgstr "" "无法将 SD 卡与文件夹同步。如果您不在“设置 > Wii > SD 卡设置 > 立即将文件转换" "为文件夹”中手动重新发起同步，在下次启动时，此会话的所有更改都将被丢弃！" #: Source/Core/DolphinQt/ResourcePackManager.cpp:226 msgid "Failed to uninstall pack: %1" msgstr "卸载包失败: %1" #: Source/Core/Core/IOS/USB/Bluetooth/BTEmu.cpp:78 msgid "Failed to write BT.DINF to SYSCONF" msgstr "无法将 BT.DINF 写入 SYSCONF" #: Source/Core/Core/NetPlayClient.cpp:1173 msgid "Failed to write Mii data." msgstr "写入 Mii 数据失败。" #: Source/Core/Core/NetPlayClient.cpp:1258 msgid "Failed to write Wii save." msgstr "写入 Wii 存档失败。" #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:131 msgid "Failed to write config file!" msgstr "写入配置文件失败!" #: Source/Core/DolphinQt/GCMemcardManager.cpp:574 #: Source/Core/DolphinQt/GCMemcardManager.cpp:677 #: Source/Core/DolphinQt/GCMemcardManager.cpp:692 msgid "Failed to write modified memory card to disk." msgstr "修改过的存储卡写入磁盘失败。" #: Source/Core/Core/NetPlayClient.cpp:1271 msgid "Failed to write redirected save." msgstr "写入重定向存档失败。" #: Source/Core/DolphinQt/GCMemcardManager.cpp:448 msgid "Failed to write savefile to disk." msgstr "存档文件写入磁盘失败。" #: Source/Core/DiscIO/CompressedBlob.cpp:382 #: Source/Core/DiscIO/FileBlob.cpp:104 Source/Core/DiscIO/WIABlob.cpp:2062 msgid "" "Failed to write the output file \"{0}\".\n" "Check that you have enough space available on the target drive." msgstr "" "无法写入输出文件 “{0}”。\n" "请检查目标驱动器是否有足够多的可用空间。" #: Source/Core/DolphinQt/GameList/GameList.cpp:631 #: Source/Core/DolphinQt/GameList/GameList.cpp:661 #: Source/Core/DolphinQt/GameList/GameList.cpp:858 #: Source/Core/DolphinQt/MenuBar.cpp:1086 msgid "Failure" msgstr "失败" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:184 msgid "Fair Input Delay" msgstr "公平输入延迟" #: Source/Core/DolphinQt/Settings/GeneralPane.cpp:206 msgid "Fallback Region" msgstr "备用区域" #: Source/Core/DolphinQt/Settings/GeneralPane.cpp:217 msgid "Fallback Region:" msgstr "备用区域：" #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:232 #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:83 msgid "Fast" msgstr "快速" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:107 msgid "Fast Depth Calculation" msgstr "快速深度计算" #: Source/Core/Core/Movie.cpp:1300 msgid "" "Fatal desync. Aborting playback. (Error in PlayWiimote: {0} != {1}, byte " "{2}.){3}" msgstr "" "致命的不同步。回放中止。(在 PlayWiimote 中发生错误: {0} != {1}, byte {2}.){3}" #: Source/Core/Core/FreeLookManager.cpp:105 #: Source/Core/DolphinQt/Config/Mapping/FreeLookGeneral.cpp:25 msgid "Field of View" msgstr "视野" #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:235 msgid "Figure Number:" msgstr "角色编号：" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:380 msgid "Figure type" msgstr "角色类型" #: Source/Core/DolphinQt/Config/InfoWidget.cpp:46 msgid "File Details" msgstr "文件详细信息" #: Source/Core/DolphinQt/GameList/GameList.cpp:1010 #: Source/Core/DolphinQt/GameList/GameListModel.cpp:230 #: Source/Core/DolphinQt/MenuBar.cpp:662 msgid "File Format" msgstr "文件格式" #: Source/Core/DolphinQt/Config/InfoWidget.cpp:65 msgid "File Format:" msgstr "文件格式：" #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:82 msgid "File Info" msgstr "文件信息" #: Source/Core/DolphinQt/GameList/GameList.cpp:1005 #: Source/Core/DolphinQt/GameList/GameListModel.cpp:224 #: Source/Core/DolphinQt/MenuBar.cpp:657 msgid "File Name" msgstr "文件名" #: Source/Core/DolphinQt/GameList/GameList.cpp:1006 #: Source/Core/DolphinQt/GameList/GameListModel.cpp:226 #: Source/Core/DolphinQt/MenuBar.cpp:658 msgid "File Path" msgstr "文件路径" #: Source/Core/DolphinQt/GameList/GameList.cpp:1009 #: Source/Core/DolphinQt/MenuBar.cpp:661 msgid "File Size" msgstr "文件大小" #: Source/Core/DolphinQt/Config/InfoWidget.cpp:58 msgid "File Size:" msgstr "文件大小:" #: Source/Core/DolphinQt/Config/GeckoCodeWidget.cpp:363 msgid "File contained no codes." msgstr "文件未包含代码。" #: Source/Core/DolphinQt/GCMemcardManager.cpp:150 msgid "Filename" msgstr "文件名" #: Source/Core/DiscIO/CompressedBlob.cpp:294 msgid "Files opened, ready to compress." msgstr "文件已打开，准备压缩。" #: Source/Core/Core/Boot/Boot.cpp:92 msgid "" "Files specified in the M3U file \"{0}\" were not found:\n" "{1}" msgstr "" "找不到 M3U 文件 “{0}” 中指定的下列文件:\n" "{1}" #: Source/Core/DolphinQt/GCMemcardManager.cpp:835 msgid "Filesize does not match any known GameCube Memory Card size." msgstr "文件大小与任何已知的 GameCube 存储卡大小都不匹配。" #: Source/Core/DolphinQt/GCMemcardManager.cpp:838 msgid "Filesize in header mismatches actual card size." msgstr "标头中的文件大小与实际卡大小不匹配。" #: Source/Core/DolphinQt/Config/PropertiesDialog.cpp:91 msgid "Filesystem" msgstr "文件系统" #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:103 msgid "Filters" msgstr "过滤" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:152 msgid "Find &Next" msgstr "查找下一个(&N)" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:153 msgid "Find &Previous" msgstr "查找上一个(&P)" #: Source/Core/DolphinQt/Config/Mapping/MappingIndicator.cpp:922 msgid "Finish Calibration" msgstr "完成校准" #: Source/Core/DolphinQt/WiiUpdate.cpp:110 msgid "" "Finishing the update...\n" "This can take a while." msgstr "" "正在完成更新...\n" "这可能需要一段时间。" #. i18n: One of the elements in the Skylanders games. Japanese: 火. For official translations #. in other languages, check the SuperChargers manual at https://support.activision.com/manuals #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:349 msgid "Fire" msgstr "火" #: Source/Core/DolphinQt/Config/FreeLookWidget.cpp:47 msgid "First Person" msgstr "第一人称" #: Source/Core/DolphinQt/GCMemcardManager.cpp:128 msgid "Fix Checksums" msgstr "修正校验和" #: Source/Core/DolphinQt/GCMemcardManager.cpp:691 msgid "Fix Checksums Failed" msgstr "修正校验和失败" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:202 msgid "Fixed Alignment" msgstr "固定对齐" #. i18n: These are the kinds of flags that a CPU uses (e.g. carry), #. not the kinds of flags that represent e.g. countries #: Source/Core/DolphinQt/Debugger/BreakpointWidget.cpp:167 #: Source/Core/DolphinQt/Debugger/JITWidget.cpp:87 msgid "Flags" msgstr "标记" #. i18n: A floating point number #. i18n: Floating-point (non-integer) number #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:138 #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:198 #: Source/Core/DolphinQt/Debugger/RegisterWidget.cpp:153 #: Source/Core/DolphinQt/Debugger/WatchWidget.cpp:97 msgid "Float" msgstr "浮点" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:567 msgid "Follow &branch" msgstr "跟随分支(&B)" #: Source/Core/DolphinQt/Config/Mapping/MappingIndicator.cpp:890 msgid "For best results please slowly move your input to all possible regions." msgstr "为获得最佳效果，请将输入标志缓慢移至所有可能的区域。" #: Source/Core/DolphinQt/Settings/BroadbandAdapterSettingsDialog.cpp:42 msgid "" "For setup instructions, refer to this page." msgstr "" "有关设置说明，请参阅此页面。" #: Source/Core/DolphinQt/Settings/BroadbandAdapterSettingsDialog.cpp:65 msgid "" "For setup instructions, refer to this page." msgstr "" "有关设置说明，请参阅此页" "面。" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:59 msgid "Force 16:9" msgstr "强制 16:9" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:156 msgid "Force 24-Bit Color" msgstr "强制 24 位色" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:59 msgid "Force 4:3" msgstr "强制 4:3" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:119 msgid "Force Linear" msgstr "强制线性" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:126 msgid "Force Linear and 16x Anisotropic" msgstr "强制线性和 16x 各向异性" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:120 msgid "Force Linear and 2x Anisotropic" msgstr "强制线性和 2x 各向异性" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:122 msgid "Force Linear and 4x Anisotropic" msgstr "强制线性和 4x 各向异性" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:124 msgid "Force Linear and 8x Anisotropic" msgstr "强制线性和 8x 各向异性" #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:139 msgid "Force Listen Port:" msgstr "强制监听端口:" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:118 msgid "Force Nearest" msgstr "强制邻近" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:449 msgid "Forced off because %1 doesn't support VS expansion." msgstr "已强制关闭，因为 %1 不支持顶点着色器扩展。" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:446 msgid "Forced on because %1 doesn't support geometry shaders." msgstr "已强制打开，因为 %1 不支持几何着色器。" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:564 msgid "" "Forces the game to output graphics at any aspect ratio by expanding the view " "frustum without stretching the image.
This is a hack, and its results " "will vary widely game to game (it often causes the UI to stretch).
Game-" "specific AR/Gecko-code aspect ratio patches are preferable over this if " "available.

If unsure, leave this unchecked." msgstr "" "通过不拉伸图像扩展视锥体，强制游戏以任意长宽比输出图形。
这是一种破坏性修" "改，其结果会因游戏而异（通常会导致 UI 拉伸）。
游戏特定的 AR/Gecko 码长宽" "比补丁如有效则推荐用长宽比补丁。

如无法确定，请不要" "选中此选项。" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:592 msgid "" "Forces the game to render the RGB color channels in 24-bit, thereby " "increasing quality by reducing color banding.

Has no impact on " "performance and causes few graphical issues.

If " "unsure, leave this checked." msgstr "" "强制游戏渲染 24 位的 RGB 颜色通道，从而通过减少渐变色带来提高质量。

对" "性能没有影响，并且几乎没有图形问题。

如无法确定，请" "选中此项。" #: Source/Core/DolphinQt/ConvertDialog.cpp:60 msgid "Format:" msgstr "格式:" #: Source/Core/Core/FreeLookManager.cpp:92 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Force.cpp:24 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/IMUAccelerometer.cpp:22 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Tilt.cpp:20 msgid "Forward" msgstr "前" #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:149 msgid "Forward port (UPnP)" msgstr "转发端口(UPnP)" #: Source/Core/DolphinQt/FIFO/FIFOAnalyzer.cpp:470 msgid "Found %1 results for \"%2\"" msgstr "已找到 \"%2\" 的 %1 个结果 " #: Source/Core/DolphinQt/CheatSearchWidget.cpp:336 #, c-format msgctxt "" msgid "Found %n address(es)." msgstr "找到 %n 个地址。" #: Source/Core/DolphinQt/FIFO/FIFOAnalyzer.cpp:157 msgid "Frame %1" msgstr "帧 %1" #: Source/Core/Core/HotkeyManager.cpp:50 Source/Core/Core/HotkeyManager.cpp:336 #: Source/Core/DolphinQt/Config/Mapping/HotkeyTAS.cpp:21 msgid "Frame Advance" msgstr "逐帧播放" #: Source/Core/Core/HotkeyManager.cpp:51 msgid "Frame Advance Decrease Speed" msgstr "逐帧播放减小速度" #: Source/Core/Core/HotkeyManager.cpp:52 msgid "Frame Advance Increase Speed" msgstr "逐帧播放增加速度" #: Source/Core/Core/HotkeyManager.cpp:53 msgid "Frame Advance Reset Speed" msgstr "逐帧播放重置速度" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:134 msgid "Frame Dumping" msgstr "转储帧" #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:107 msgid "Frame Range" msgstr "帧范围" #: Source/Core/VideoCommon/FrameDumper.cpp:325 msgid "Frame dump image(s) '{0}' already exists. Overwrite?" msgstr "帧转储图像 ‘{0}’ 已经存在。是否覆盖？" #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:137 msgid "Frames to Record:" msgstr "录制帧数：" #: Source/Core/DiscIO/Enums.cpp:36 msgid "France" msgstr "法国" #: Source/Core/DolphinQt/GCMemcardManager.cpp:312 msgid "Free Blocks: %1" msgstr "空闲区块数: %1" #: Source/Core/DolphinQt/GCMemcardManager.cpp:313 msgid "Free Files: %1" msgstr "空闲文件数: %1" #: Source/Core/DolphinQt/Config/FreeLookWidget.cpp:49 msgid "Free Look Control Type" msgstr "自由视点控制类型" #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:470 msgid "Free Look Controller %1" msgstr "自由视点控制器 %1" #: Source/Core/DolphinQt/Config/FreeLookWindow.cpp:19 msgid "Free Look Settings" msgstr "自由视点设置" #: Source/Core/DolphinQt/Config/FreeLookWidget.cpp:61 msgid "" "Free Look allows for manipulation of the in-game camera. Different camera " "types are available from the dropdown.

For detailed instructions, refer to " "this page." msgstr "" "自由视点允许操纵游戏中的镜头。下拉菜单提供不同的镜头类型。

有关详细说" "明，请参阅" "此页面。" #: Source/Core/Core/FreeLookManager.cpp:315 #: Source/Core/DolphinQt/Config/Mapping/HotkeyGraphics.cpp:25 msgid "FreeLook" msgstr "自由视点" #: Source/Core/Core/HotkeyManager.cpp:348 msgid "Freelook" msgstr "自由视点" #: Source/Core/Core/HotkeyManager.cpp:121 msgid "Freelook Toggle" msgstr "自由视点切换" #: Source/Core/DiscIO/Enums.cpp:86 #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:87 #: Source/Core/DolphinQt/Settings/WiiPane.cpp:171 msgid "French" msgstr "法语" #. i18n: Refers to a number of actions per second in Hz. #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Force.cpp:151 msgid "Frequency" msgstr "频率" #: Source/Core/Core/HW/WiimoteEmu/Extension/Guitar.cpp:71 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:131 msgid "Frets" msgstr "品键" #: Source/Core/DolphinQt/Debugger/BreakpointDialog.cpp:300 msgid "From" msgstr "从" #: Source/Core/DolphinQt/Debugger/BreakpointDialog.cpp:249 #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:96 #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:111 msgid "From:" msgstr "从：" #: Source/Core/DolphinQt/ToolBar.cpp:124 msgid "FullScr" msgstr "全屏" #: Source/Core/DolphinQt/Debugger/BreakpointWidget.cpp:167 msgid "Function" msgstr "函数" #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:302 msgid "Functions" msgstr "函数" #: Source/Core/DolphinQt/Config/GamecubeControllersWidget.cpp:42 msgid "GBA (Integrated)" msgstr "GBA (集成)" #: Source/Core/DolphinQt/Config/GamecubeControllersWidget.cpp:44 msgid "GBA (TCP)" msgstr "GBA (TCP)" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:115 msgid "GBA Cartridge Path:" msgstr "GBA 卡带路径：" #: Source/Core/Core/HotkeyManager.cpp:358 msgid "GBA Core" msgstr "GBA 核心" #: Source/Core/DolphinQt/NetPlay/PadMappingDialog.cpp:35 msgid "GBA Port %1" msgstr "GBA 端口 %1" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:199 msgid "GBA Settings" msgstr "GBA 设置" #: Source/Core/DolphinQt/TAS/GBATASInputWindow.cpp:27 msgid "GBA TAS Input %1" msgstr "GBA TAS 输入 %1" #: Source/Core/Core/HotkeyManager.cpp:359 msgid "GBA Volume" msgstr "GBA 音量" #: Source/Core/Core/HotkeyManager.cpp:360 msgid "GBA Window Size" msgstr "GBA 窗口大小" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:835 msgid "GBA%1 ROM changed to \"%2\"" msgstr "GBA%1 ROM 更改为 \"%2\"" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:840 msgid "GBA%1 ROM disabled" msgstr "GBA%1 ROM 已禁用" #: Source/Core/DolphinQt/NetPlay/PadMappingDialog.cpp:38 msgid "GC Port %1" msgstr "GC 端口 %1" #: Source/Core/Core/HW/EXI/EXI_Device.h:103 msgid "GCI Folder" msgstr "GCI 文件夹" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:121 msgid "GCI Folder Path:" msgstr "GCI 文件夹路径：" #: Source/Core/Core/HW/GCMemcard/GCMemcardDirectory.cpp:428 msgid "GCMemcardDirectory: ClearBlock called with invalid block address" msgstr "GCMemcardDirectory: ClearBlock 被用于无效的区块地址" #: Source/Core/DolphinQt/ConvertDialog.cpp:349 msgid "GCZ GC/Wii images (*.gcz)" msgstr "GCZ GC/Wii 镜像 (*.gcz)" #: Source/Core/VideoCommon/CommandProcessor.cpp:720 msgid "" "GFX FIFO: Unknown Opcode ({0:#04x} @ {1}, preprocess={2}).\n" "\n" "{3}\n" "\n" "Further errors will be sent to the Video Backend log and Dolphin will now " "likely crash or hang." msgstr "" "GFX FIFO: 未知 Opcode ({0:#04x} @ {1}, preprocess={2}).\n" "\n" "{3}\n" "\n" "更多错误将被发送到视频后端日志，Dolphin 现在可能会崩溃或挂起。" #: Source/Core/VideoBackends/OGL/OGLMain.cpp:181 msgid "GL_MAX_TEXTURE_SIZE is {0} - must be at least 1024." msgstr "GL_最大_纹理_大小 是 {0} - 必须至少 1024 。" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:73 msgid "GPU Texture Decoding" msgstr "GPU 纹理解码" #: Source/Core/VideoBackends/OGL/OGLConfig.cpp:232 msgid "" "GPU: ERROR: Need GL_ARB_framebuffer_object for multiple render targets.\n" "GPU: Does your video card support OpenGL 3.0?" msgstr "" "GPU：错误：需要 GL_ARB_framebuffer_object 来多重渲染目标。\n" "GPU：您的显卡是否支持 OpenGL 3.0？" #: Source/Core/VideoBackends/OGL/OGLMain.cpp:96 msgid "GPU: OGL ERROR: Does your video card support OpenGL 2.0?" msgstr "GPU： OGL 错误：您的显卡是否支持 OpenGL 2.0？" #: Source/Core/VideoBackends/OGL/OGLConfig.cpp:250 msgid "" "GPU: OGL ERROR: Need GL_ARB_map_buffer_range.\n" "GPU: Does your video card support OpenGL 3.0?" msgstr "" "GPU：错误：需要 GL_ARB_map_buffer_range。\n" "GPU：您的显卡是否支持 OpenGL 3.0？" #: Source/Core/VideoBackends/OGL/OGLConfig.cpp:275 msgid "" "GPU: OGL ERROR: Need GL_ARB_sampler_objects.\n" "GPU: Does your video card support OpenGL 3.3?" msgstr "" "GPU：OGL 错误：需要 GL_ARB_sampler_objects。\n" "GPU：您的显卡是否支持 OpenGL 3.3？" #: Source/Core/VideoBackends/OGL/OGLConfig.cpp:259 msgid "" "GPU: OGL ERROR: Need GL_ARB_uniform_buffer_object.\n" "GPU: Does your video card support OpenGL 3.1?" msgstr "" "GPU：OGL 错误：需要 GL_ARB_uniform_buffer_object。\n" "GPU：您的显卡是否支持 OpenGL 3.1？" #: Source/Core/VideoBackends/OGL/OGLConfig.cpp:241 msgid "" "GPU: OGL ERROR: Need GL_ARB_vertex_array_object.\n" "GPU: Does your video card support OpenGL 3.0?" msgstr "" "GPU：OGL 错误：需要 GL_ARB_vertex_array_object。\n" "GPU：您的显卡是否支持 OpenGL 3.0？" #: Source/Core/VideoBackends/OGL/OGLMain.cpp:103 msgid "" "GPU: OGL ERROR: Need OpenGL version 3.\n" "GPU: Does your video card support OpenGL 3?" msgstr "" "GPU：OGL 错误：需要 OpenGL 版本 3 。\n" "GPU：您的显卡是否支持 OpenGL 3？" #: Source/Core/VideoBackends/OGL/OGLConfig.cpp:467 msgid "" "GPU: OGL ERROR: Need at least GLSL 1.30\n" "GPU: Does your video card support OpenGL 3.0?\n" "GPU: Your driver supports GLSL {0}" msgstr "" "Gpu： Ogl 错误：至少需要 Glsl 1.30\n" "GPU：您的显卡是否支持 OpenGL 3.0？\n" "GPU：您的驱动程序支持 GLSL {0}" #: Source/Core/VideoBackends/OGL/OGLMain.cpp:169 msgid "" "GPU: OGL ERROR: Number of attributes {0} not enough.\n" "GPU: Does your video card support OpenGL 2.x?" msgstr "" "GPU：OGL 错误：{0} 属性数量不足。\n" "GPU：您的显卡是否支持 OpenGL 2.x？" #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:224 #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:256 msgid "Game" msgstr "游戏" #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:403 #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:461 msgid "Game Boy Advance" msgstr "Game Boy Advance" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:631 msgid "Game Boy Advance Carts (*.gba)" msgstr "GBA 游戏卡带 (*.gba)" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:817 msgid "" "Game Boy Advance ROMs (*.gba *.gbc *.gb *.7z *.zip *.agb *.mb *.rom *.bin);;" "All Files (*)" msgstr "" "Game Boy Advance ROMs (*.gba *.gbc *.gb *.7z *.zip *.agb *.mb *.rom *.bin);;" "所有文件 (*)" #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:402 msgid "Game Boy Advance at Port %1" msgstr "GameBoy Advance 连至端口 %1" #: Source/Core/DolphinQt/Config/Graphics/ColorCorrectionConfigWindow.cpp:73 msgid "Game Color Space:" msgstr "游戏色彩空间：" #: Source/Core/DolphinQt/Config/PropertiesDialog.cpp:69 msgid "Game Config" msgstr "游戏配置" #: Source/Core/DolphinQt/Config/InfoWidget.cpp:87 msgid "Game Details" msgstr "游戏详细信息" #: Source/Core/DolphinQt/Settings/PathPane.cpp:120 msgid "Game Folders" msgstr "游戏文件夹" #: Source/Core/DolphinQt/Config/Graphics/ColorCorrectionConfigWindow.cpp:88 msgid "Game Gamma" msgstr "游戏伽玛" #: Source/Core/DolphinQt/Config/Graphics/ColorCorrectionConfigWindow.cpp:86 msgid "Game Gamma:" msgstr "游戏伽玛：" #: Source/Core/DolphinQt/GameList/GameList.cpp:1007 #: Source/Core/DolphinQt/MenuBar.cpp:659 msgid "Game ID" msgstr "游戏 ID" #: Source/Core/DolphinQt/Config/InfoWidget.cpp:122 #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:111 msgid "Game ID:" msgstr "游戏 ID：" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:635 msgid "Game Status" msgstr "游戏状态" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:827 msgid "Game changed to \"%1\"" msgstr "游戏更改为 \"%1\"" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:643 msgid "" "Game file has a different hash; right-click it, select Properties, switch to " "the Verify tab, and select Verify Integrity to check the hash" msgstr "" "游戏文件具有不同的哈希值；右键单击文件，选择属性，切换到验证选项卡，然后选择" "验证完整性以检查哈希值" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:646 msgid "Game has a different disc number" msgstr "游戏具有不同的光盘编号" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:648 msgid "Game has a different revision" msgstr "游戏具有不同的修订版" #: Source/Core/Core/NetPlayClient.cpp:1749 msgid "Game is already running!" msgstr "游戏已经运行!" #: Source/Core/Core/HW/GCMemcard/GCMemcardDirectory.cpp:499 msgid "" "Game overwrote with another games save. Data corruption ahead {0:#x}, {1:#x}" msgstr "游戏覆盖了其他的游戏存档，将会破坏数据 {0:#x}, {1:#x}" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:650 msgid "Game region does not match" msgstr "游戏区域不匹配" #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:149 msgid "Game-Specific Settings" msgstr "特定游戏设置" #: Source/Core/DolphinQt/Config/SettingsWindow.cpp:41 msgid "GameCube" msgstr "GameCube" #: Source/Core/DolphinQt/Config/GamecubeControllersWidget.cpp:37 msgid "GameCube Adapter for Wii U" msgstr "Wii U GameCube 适配器" #: Source/Core/DolphinQt/Config/Mapping/GCPadWiiUConfigDialog.cpp:35 msgid "GameCube Adapter for Wii U at Port %1" msgstr "端口 %1 的 Wii U GameCube 适配器" #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:416 msgid "GameCube Controller" msgstr "GameCube 控制器" #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:415 msgid "GameCube Controller at Port %1" msgstr "端口 %1 的 GameCube 控制器" #: Source/Core/DolphinQt/Config/GamecubeControllersWidget.cpp:77 msgid "GameCube Controllers" msgstr "GameCube 控制器" #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:408 msgid "GameCube Keyboard" msgstr "GameCube 键盘" #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:407 msgid "GameCube Keyboard at Port %1" msgstr "端口 %1 的 GameCube 键盘" #: Source/Core/DolphinQt/GCMemcardManager.cpp:100 msgid "GameCube Memory Card Manager" msgstr "GameCube 存储卡管理器" #: Source/Core/DolphinQt/GCMemcardManager.cpp:363 msgid "GameCube Memory Cards" msgstr "GameCube 存储卡" #: Source/Core/DolphinQt/GCMemcardCreateNewDialog.cpp:75 #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:423 msgid "GameCube Memory Cards (*.raw *.gcp)" msgstr "GameCube 存储卡 (*.raw *.gcp)" #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:420 msgid "GameCube Microphone Slot %1" msgstr "GameCube 麦克风插槽 %1" #: Source/Core/DolphinQt/TAS/GCTASInputWindow.cpp:27 msgid "GameCube TAS Input %1" msgstr "GameCube TAS 输入 %1" #: Source/Core/DolphinQt/Config/Graphics/ColorCorrectionConfigWindow.cpp:80 msgid "Gamma" msgstr "伽玛" #: Source/Core/InputCommon/ControllerEmu/ControlGroup/AnalogStick.cpp:103 msgid "Gate Size" msgstr "洞口大小" #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:411 msgid "Gecko (04)" msgstr "Gecko (04)" #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:412 msgid "Gecko (C0)" msgstr "Gecko (C0)" #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:413 msgid "Gecko (C2)" msgstr "Gecko (C2)" #: Source/Core/DolphinQt/CheatsManager.cpp:139 #: Source/Core/DolphinQt/Config/PropertiesDialog.cpp:73 msgid "Gecko Codes" msgstr "Gecko 代码" #: Source/Core/Core/HotkeyManager.cpp:333 #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:200 #: Source/Core/DolphinQt/Config/Graphics/GraphicsWindow.cpp:60 #: Source/Core/DolphinQt/Config/Graphics/PostProcessingConfigWindow.cpp:120 #: Source/Core/DolphinQt/Config/Mapping/HotkeyGeneral.cpp:21 #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:446 #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:468 #: Source/Core/DolphinQt/Config/SettingsWindow.cpp:37 msgid "General" msgstr "常规" #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:431 msgid "General and Options" msgstr "常规和选项" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:505 msgid "Generate Action Replay Code" msgstr "生成 Action Replay 代码" #: Source/Core/DolphinQt/Settings/GeneralPane.cpp:239 msgid "Generate a New Statistics Identity" msgstr "生成一个新的统计标识" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:543 msgid "Generated AR code." msgstr "已生成 AR 代码。" #: Source/Core/DolphinQt/MenuBar.cpp:1295 msgid "Generated symbol names from '%1'" msgstr "从 '%1' 中生成符号名" #: Source/Core/DiscIO/Enums.cpp:83 #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:86 #: Source/Core/DolphinQt/Settings/WiiPane.cpp:170 msgid "German" msgstr "德语" #: Source/Core/DiscIO/Enums.cpp:39 msgid "Germany" msgstr "德国" #: Source/Core/Core/IOS/USB/Bluetooth/BTReal.cpp:161 msgid "GetDeviceList failed: {0}" msgstr "获取设备列表失败: {0}" #: Source/Core/UICommon/UICommon.cpp:545 msgid "GiB" msgstr "GiB" #. i18n: One of the figure types in the Skylanders games. #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:418 msgid "Giant" msgstr "巨人" #. i18n: Figures for the game Skylanders: Giants. The game has the same title in all countries #. it was released in. It was not released in Japan. #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:278 msgid "Giants" msgstr "巨人" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:196 msgid "Golf Mode" msgstr "高尔夫模式" #: Source/Core/DiscIO/VolumeVerifier.cpp:345 msgid "Good dump" msgstr "正确的转储" #: Source/Core/DolphinQt/Config/Graphics/GraphicsWindow.cpp:31 #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:455 #: Source/Core/DolphinQt/ToolBar.cpp:130 msgid "Graphics" msgstr "图形" #: Source/Core/DolphinQt/Config/PropertiesDialog.cpp:75 msgid "Graphics Mods" msgstr "图形模组" #: Source/Core/Core/HotkeyManager.cpp:346 #: Source/Core/DolphinQt/Config/Mapping/HotkeyGraphics.cpp:20 msgid "Graphics Toggles" msgstr "图形切换" #: Source/Core/DolphinQt/Config/GraphicsModWarningWidget.cpp:59 msgid "Graphics mods are currently disabled." msgstr "图形模组当前已禁用。" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:553 msgid "" "Greatly increases the quality of textures generated using render-to-texture " "effects.

Slightly increases GPU load and causes relatively few " "graphical issues. Raising the internal resolution will improve the effect of " "this setting.

If unsure, leave this checked." msgstr "" "显著提高渲染到纹理效果所生成纹理的质量。

轻微提升 GPU 占用率，较少产生" "图像问题。提高内部分辨率将增强此选项的效果。

如无法" "确定，请选中此项。" #: Source/Core/Core/HW/WiimoteEmu/Extension/Drums.cpp:38 #: Source/Core/Core/HW/WiimoteEmu/Extension/Guitar.cpp:49 msgid "Green" msgstr "绿" #: Source/Core/Core/HW/WiimoteEmu/Extension/Turntable.cpp:41 msgid "Green Left" msgstr "绿 左" #: Source/Core/Core/HW/WiimoteEmu/Extension/Turntable.cpp:44 msgid "Green Right" msgstr "绿 右" #: Source/Core/DolphinQt/MenuBar.cpp:634 msgid "Grid View" msgstr "网格视图" #: Source/Core/Core/HW/WiimoteEmu/Extension/Guitar.cpp:66 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:120 msgid "Guitar" msgstr "吉他" #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.cpp:256 msgid "Gyroscope" msgstr "陀螺仪" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:211 msgid "HDMI 3D" msgstr "HDMI 3D" #: Source/Core/DolphinQt/Config/Graphics/ColorCorrectionConfigWindow.cpp:130 msgid "HDR" msgstr "HDR" #: Source/Core/DolphinQt/Config/Graphics/ColorCorrectionConfigWindow.cpp:139 msgid "HDR Paper White Nits" msgstr "HDR 白色亮度尼特数" #: Source/Core/DolphinQt/Config/Graphics/ColorCorrectionConfigWindow.cpp:137 msgid "HDR Paper White Nits:" msgstr "HDR 白色亮度尼特数：" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:161 msgid "HDR Post-Processing" msgstr "HDR 后处理" #: Source/Core/DolphinQt/Config/Graphics/GraphicsWindow.cpp:62 msgid "Hacks" msgstr "修正" #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:164 msgid "Head" msgstr "头" #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:110 #: qtbase/src/gui/kernel/qplatformtheme.cpp:736 msgid "Help" msgstr "帮助" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:128 msgid "Hero level:" msgstr "英雄等级：" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:120 msgid "Hex" msgstr "十六进制" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:189 msgid "Hex 16" msgstr "十六进制 16" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:190 msgid "Hex 32" msgstr "十六进制 32" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:188 msgid "Hex 8" msgstr "十六进制 8" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:136 msgid "Hex Byte String" msgstr "十六进制字节字符串" #: Source/Core/DolphinQt/Debugger/RegisterWidget.cpp:149 #: Source/Core/DolphinQt/Debugger/WatchWidget.cpp:91 msgid "Hexadecimal" msgstr "十六进制" #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Cursor.cpp:30 msgid "Hide" msgstr "隐藏" #: Source/Core/DolphinQt/MenuBar.cpp:729 msgid "Hide All" msgstr "隐藏全部" #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:93 msgid "Hide In-Game Sessions" msgstr "隐藏正在游戏的会话" #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:92 msgid "Hide Incompatible Sessions" msgstr "隐藏不兼容的会话" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:233 msgid "Hide Remote GBAs" msgstr "隐藏远程 GBA" #: Source/Core/DolphinQt/Config/VerifyWidget.cpp:208 #: Source/Core/DolphinQt/Settings/AudioPane.cpp:426 msgid "High" msgstr "高" #: Source/Core/DolphinQt/Settings/AudioPane.cpp:424 msgid "Highest" msgstr "最高" #. i18n: Refers to how hard emulated drum pads are struck. #: Source/Core/Core/HW/WiimoteEmu/Extension/Drums.cpp:69 msgid "Hit Strength" msgstr "敲击力度" #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:90 #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:264 #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:498 msgid "Hits" msgstr "命中数" #. i18n: FOV stands for "Field of view". #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.cpp:238 msgid "Horizontal FOV" msgstr "水平视野" #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:152 #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:206 msgid "Host" msgstr "主机" #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:311 msgid "Host Code:" msgstr "主机代码 :" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:190 msgid "Host Input Authority" msgstr "主机输入优先权" #: Source/Core/DolphinQt/Debugger/JITWidget.cpp:82 msgid "Host Size" msgstr "主机大小" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:192 msgid "" "Host has control of sending all inputs to the game, as received from other " "players, giving the host zero latency but increasing latency for others.\n" "Suitable for casual games with 3+ players, possibly on unstable or high " "latency connections." msgstr "" "主机拥有发送所有输入到游戏的控制权，从其他玩家接收输入，给予主机零延迟，但会" "增加其他人的延迟。\n" "适合 3 人以上的休闲游戏，在连接不稳定或高延迟下或许也能运作。" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:936 msgid "Host input authority disabled" msgstr "主机输入优先权已禁用" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:936 msgid "Host input authority enabled" msgstr "主机输入优先权已启用" #: Source/Core/DolphinQt/GameList/GameList.cpp:527 msgid "Host with NetPlay" msgstr "建主机联网游戏" #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:352 msgid "Hostname" msgstr "主机名" #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:462 msgid "Hotkey Settings" msgstr "热键设置" #: Source/Core/Core/HotkeyManager.cpp:210 #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.cpp:259 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuGeneral.cpp:41 msgid "Hotkeys" msgstr "热键" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:160 msgid "Hotkeys Require Window Focus" msgstr "热键需要窗口是活动状态" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:125 msgid "Hybrid Ubershaders" msgstr "混合超着色器" #. i18n: The symbol/abbreviation for hertz (cycles per second). #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Force.cpp:153 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Tilt.cpp:38 msgid "Hz" msgstr "Hz" #: Source/Core/DolphinQt/NKitWarningDialog.cpp:53 msgid "I am aware of the risks and want to continue" msgstr "我已知道风险并希望继续" #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:352 #: Source/Core/DolphinQt/GameList/GameListModel.cpp:216 msgid "ID" msgstr "ID" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:612 msgid "ID entered is invalid!" msgstr "输入的 ID 无效！" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:588 msgid "ID:" msgstr "ID：" #: Source/Core/DolphinQt/Config/InfoWidget.cpp:136 msgid "IOS Version:" msgstr "IOS 版本：" #: Source/Core/Core/IOS/Network/SSL.cpp:181 msgid "" "IOS: A file required for SSL services ({0}) is invalid. Please refer to " "https://dolphin-emu.org/docs/guides/wii-network-guide/ for instructions on " "setting up Wii networking." msgstr "" "IOS: SSL 服务所必需的一个文件 ({0}) 无效。请参阅 https://dolphin-emu.org/" "docs/guides/wii-network-guide/ 了解如何设置 Wii 联网。" #: Source/Core/Core/IOS/Network/SSL.cpp:166 msgid "" "IOS: Could not read a file required for SSL services ({0}). Please refer to " "https://dolphin-emu.org/docs/guides/wii-network-guide/ for instructions on " "setting up Wii networking." msgstr "" "IOS: 无法读取 SSL 服务所必需的一个文件 ({0})。请参阅 https://dolphin-emu.org/" "docs/guides/wii-network-guide/ 了解如何设置 Wii 联网。" #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:311 msgid "IP Address:" msgstr "IP 地址 :" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:69 msgid "IPL Settings" msgstr "IPL 设置" #: Source/Core/DolphinQt/TAS/WiiTASInputWindow.cpp:49 msgid "IR" msgstr "红外线" #. i18n: IR stands for infrared and refers to the pointer functionality of Wii Remotes #: Source/Core/DolphinQt/Settings/WiiPane.cpp:361 msgid "IR Sensitivity:" msgstr "红外灵敏度：" #: Source/Core/DolphinQt/ConvertDialog.cpp:88 msgid "" "ISO: A simple and robust format which is supported by many programs. It " "takes up more space than any other format.\n" "\n" "GCZ: A basic compressed format which is compatible with most versions of " "Dolphin and some other programs. It can't efficiently compress junk data " "(unless removed) or encrypted Wii data.\n" "\n" "WIA: An advanced compressed format which is compatible with Dolphin " "5.0-12188 and later, and a few other programs. It can efficiently compress " "encrypted Wii data, but not junk data (unless removed).\n" "\n" "RVZ: An advanced compressed format which is compatible with Dolphin " "5.0-12188 and later. It can efficiently compress both junk data and " "encrypted Wii data." msgstr "" "ISO：一种简单而强大的格式，许多程序都支持该格式。比任何其他格式占用更多的空" "间。\n" "\n" "GCZ：一种基本的压缩格式，与大多数版本的 Dolphin 和某些其他程序兼容。无法有效" "地压缩垃圾数据（除非移除）或加密的 Wii 数据。\n" "\n" "WIA：一种高级压缩格式，与 Dolphin 5.0-12188 及更高版本以及其他一些程序兼容。" "可以有效地压缩加密的 Wii 数据，但不能压缩垃圾数据（除非移除）。\n" "\n" "RVZ：一种高级压缩格式，与 Dolphin 5.0-12188 及更高版本兼容。可以有效地压缩垃" "圾数据和加密的 Wii 数据。" #: Source/Core/DolphinQt/GCMemcardManager.cpp:156 msgid "Icon" msgstr "图标" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:198 msgid "" "Identical to Host Input Authority, except the \"Host\" (who has zero " "latency) can be switched at any time.\n" "Suitable for turn-based games with timing-sensitive controls, such as golf." msgstr "" "与主机输入权限相同，除“主机”（零延迟）之外，其他可以随时切换。\n" "适用于需要时间敏感控制的回合制游戏，如高尔夫球。" #: Source/Core/DolphinQt/Settings/GeneralPane.cpp:378 msgid "Identity Generation" msgstr "身份标识生成" #: Source/Core/DolphinQt/Main.cpp:266 msgid "" "If authorized, Dolphin can collect data on its performance, feature usage, " "and configuration, as well as data on your system's hardware and operating " "system.\n" "\n" "No private data is ever collected. This data helps us understand how people " "and emulated games use Dolphin and prioritize our efforts. It also helps us " "identify rare configurations that are causing bugs, performance and " "stability issues.\n" "This authorization can be revoked at any time through Dolphin's settings." msgstr "" "如果得到您的授权，Dolphin 将收集关于其性能表现、功能使用、程序设置，以及您的" "系统硬件和操作系统的数据。\n" "\n" "我们不会收集您的隐私数据。这些数据能帮助我们了解用户与被模拟的游戏怎样使用 " "Dolphin 以确定我们的工作重点。它们还将帮助我们发现导致故障、性能问题与稳定性" "问题的罕见程序设置。\n" "您可以随时通过 Dolphin 的程序设置取消本授权。" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:167 msgid "" "If checked, all Wii saves will be used instead of only the save of the game " "being started. Useful when switching games mid-session. Has no effect if No " "Save Data is selected." msgstr "" "如果选中，将使用所有 Wii 存档，而不是仅正在启动的游戏中存档。在会话中切换游戏" "时很有用。如果选择无存档数据则无效。" #: Source/Core/Core/HW/GCPadEmu.cpp:88 msgid "" "If checked, the emulated controller is always connected.\n" "If unchecked, the connection state of the emulated controller is linked\n" "to the connection state of the real default device (if there is one)." msgstr "" "如果选中，则始终连接模拟控制器。\n" "如果未选中，则模拟控制器的连接状态关联到\n" "真实默认设备（如果存在）的连接状态。 " #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:202 msgid "" "If enabled, then all memory updates happen at once before the first frame." "

Causes issues with many fifologs, but can be useful for testing." "

If unsure, leave this unchecked." msgstr "" "如果启用，则所有内存刷新都会在第一帧之前立即发生。

会导致问题并出现大" "量 fifo 日志，但对测试很有帮助。

如无法确定，请不要" "选中此项。" #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:206 msgid "" "If unchecked, then playback of the fifolog stops after the final frame." "

This is generally only useful when a frame-dumping option is enabled." "

If unsure, leave this checked." msgstr "" "如果未选中，则 fifo 日志 的回放将在最后一帧后停止。

这通常仅在启用帧转" "储选项时有用。

如无法确定，请选中此项。" #: Source/Core/DolphinQt/DiscordJoinRequestDialog.cpp:55 #: qtbase/src/gui/kernel/qplatformtheme.cpp:728 msgid "Ignore" msgstr "忽略" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:50 msgid "Ignore Format Changes" msgstr "忽略格式变化" #: Source/Core/DolphinQt/Main.cpp:76 msgid "Ignore for this session" msgstr "本次会话期间忽略" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:228 msgid "" "Ignores any changes to the EFB format.

Improves performance in many " "games without any negative effect. Causes graphical defects in a small " "number of other games.

If unsure, leave this " "checked." msgstr "" "忽略 EFB 格式的任何变化。

在许多游戏中会提高性能且无负面作用。但在其余" "一小部分游戏中也会导致图像瑕疵。

如无法确定，请选中" "此项。" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:223 msgid "" "Ignores any requests from the CPU to read from or write to the EFB. " "

Improves performance in some games, but will disable all EFB-based " "graphical effects or gameplay-related features.

If " "unsure, leave this unchecked." msgstr "" "忽略 CPU 对 EFB 的任何读写请求。

在一些游戏中可提高性能，但会禁用所有" "基于 EFB 的图形效果或与游戏相关的特性。

如无法确定，" "请不要选中此项。" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:93 msgid "Immediately Present XFB" msgstr "立即呈现 XFB" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:403 msgid "" "Implements fullscreen mode with a borderless window spanning the whole " "screen instead of using exclusive mode. Allows for faster transitions " "between fullscreen and windowed mode, but slightly increases input latency, " "makes movement less smooth and slightly decreases performance." "

If unsure, leave this unchecked." msgstr "" "使用一个覆盖整个屏幕的无边框窗口来实现全屏模式，而非使用独占模式。开启后在全" "屏模式与窗口模式之间切换会更快，但是输入延迟将略有增加，影响操作流畅性并且性" "能也会略微降低。

如无法确定，请不要选中此项。" #: Source/Core/DolphinQt/MenuBar.cpp:275 msgid "Import BootMii NAND Backup..." msgstr "导入 BootMii NAND 备份..." #: Source/Core/DolphinQt/GCMemcardManager.cpp:551 #: Source/Core/DolphinQt/GCMemcardManager.cpp:565 #: Source/Core/DolphinQt/GCMemcardManager.cpp:573 #: Source/Core/DolphinQt/GCMemcardManager.cpp:615 msgid "Import Failed" msgstr "导入失败" #: Source/Core/DolphinQt/GCMemcardManager.cpp:587 msgid "Import Save File(s)" msgstr "导入存档文件" #: Source/Core/DolphinQt/MenuBar.cpp:301 msgid "Import Wii Save..." msgstr "导入 Wii 存档..." #: Source/Core/DolphinQt/MainWindow.cpp:1813 msgid "Importing NAND backup" msgstr "正在导入 NAND 备份" #: Source/Core/DolphinQt/MainWindow.cpp:1823 #, c-format msgid "" "Importing NAND backup\n" " Time elapsed: %1s" msgstr "" "正在导入 NAND 备份\n" " 已用时间: %1s" #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:224 msgid "In-Game?" msgstr "游戏中？" #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:267 #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:527 msgid "Included: %1" msgstr "已包含: %1" #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:82 msgid "Included: 0" msgstr "已包含: 0" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:282 msgid "" "Includes the contents of the embedded frame buffer (EFB) and upscaled EFB " "copies in save states. Fixes missing and/or non-upscaled textures/objects " "when loading states at the cost of additional save/load time." "

If unsure, leave this checked." msgstr "" "在即时存档中包含内置帧缓冲 (EFB) 和放大的 EFB 副本内容。可解决读取即时存档时" "纹理与物体缺失或模糊的问题，但会加长存/读档时间。

如" "无法确定，请选中此项。" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:218 msgid "Incorrect hero level value!" msgstr "错误的英雄等级！" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:241 msgid "Incorrect last placed time!" msgstr "上次放置的时间不正确！" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:235 msgid "Incorrect last reset time!" msgstr "上次重置的时间不正确！" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:212 msgid "Incorrect money value!" msgstr "金钱数量不正确！" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:224 msgid "Incorrect nickname!" msgstr "昵称错误！" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:230 msgid "Incorrect playtime value!" msgstr "错误的游玩时间！" #: Source/Core/Core/FreeLookManager.cpp:98 msgid "Increase" msgstr "增加" #: Source/Core/Core/HotkeyManager.cpp:129 msgid "Increase Convergence" msgstr "增加会聚" #: Source/Core/Core/HotkeyManager.cpp:127 msgid "Increase Depth" msgstr "增加深度" #: Source/Core/Core/HotkeyManager.cpp:47 msgid "Increase Emulation Speed" msgstr "增加模拟速度" #. i18n: IR stands for internal resolution #: Source/Core/Core/HotkeyManager.cpp:117 msgid "Increase IR" msgstr "增加内部分辨率" #: Source/Core/Core/HotkeyManager.cpp:182 msgid "Increase Selected State Slot" msgstr "增加选定的状态插槽" #: Source/Core/Core/FreeLookManager.cpp:107 msgid "Increase X" msgstr "增加 X" #: Source/Core/Core/FreeLookManager.cpp:109 msgid "Increase Y" msgstr "增加 Y" #: Source/Core/Core/FreeLookManager.cpp:113 msgid "Incremental Rotation" msgstr "增量旋转" #: Source/Core/DolphinQt/Config/Mapping/FreeLookRotation.cpp:43 msgid "Incremental Rotation (rad/sec)" msgstr "增量旋转（度/秒）" #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:190 msgid "Infinity Figure Creator" msgstr "Infinity 角色创建器" #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:38 msgid "Infinity Manager" msgstr "Infinity 管理器" #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:282 msgid "Infinity Object (*.bin);;" msgstr "Infinity 文件 (*.bin);;" #. i18n: Refers to a setting controling the influence of accelerometer data. #: Source/Core/InputCommon/ControllerEmu/ControlGroup/IMUCursor.cpp:48 msgid "" "Influence of accelerometer data on pitch and roll. Higher values will reduce " "drift at the cost of noise. Consider values between 1% and 3%." msgstr "" "加速度器数据对俯仰和翻滚的影响。较高的值将以噪声为代价减少漂移。建议为 1% 到 " "3% 之间的值。" #: Source/Core/DolphinQt/Config/LogConfigWidget.cpp:48 #: Source/Core/DolphinQt/Config/PropertiesDialog.cpp:76 #: Source/Core/DolphinQt/ConvertDialog.cpp:102 msgid "Info" msgstr "信息" #: Source/Core/Common/MsgHandler.cpp:59 #: Source/Core/DolphinQt/GameList/GameList.cpp:717 #: Source/Core/DolphinQt/GameList/GameList.cpp:779 #: Source/Core/DolphinQt/MenuBar.cpp:1294 #: Source/Core/DolphinQt/MenuBar.cpp:1534 msgid "Information" msgstr "信息" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:161 msgid "Inhibit Screensaver During Emulation" msgstr "在模拟过程中禁止屏幕保护程序" #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:370 msgid "Inject" msgstr "注入" #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:438 #: Source/Core/DolphinQt/Debugger/WatchWidget.cpp:275 #: Source/Core/DolphinQt/MenuBar.cpp:1317 #: Source/Core/DolphinQt/MenuBar.cpp:1376 #: Source/Core/DolphinQt/MenuBar.cpp:1645 #: Source/Core/DolphinQt/MenuBar.cpp:1670 msgid "Input" msgstr "输入" #. i18n: Refers to the "threshold" setting for pressure sensitive gamepad inputs. #: Source/Core/InputCommon/ControllerEmu/ControlGroup/MixedTriggers.cpp:30 msgid "Input strength required for activation." msgstr "激活所需要的输入力度。" #. i18n: Refers to the dead-zone setting of gamepad inputs. #: Source/Core/InputCommon/ControllerEmu/ControlGroup/ControlGroup.cpp:47 msgid "Input strength to ignore and remap." msgstr "要忽略并重新映射的输入力度。" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:598 msgid "Insert &nop" msgstr "插入 nop (&N)" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:216 msgid "Insert SD Card" msgstr "插入 SD 卡" #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:90 #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:264 #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:498 msgid "Inspected" msgstr "已检查" #: Source/Core/DolphinQt/ResourcePackManager.cpp:40 #: Source/Core/DolphinQt/ResourcePackManager.cpp:321 msgid "Install" msgstr "安装" #: Source/Core/DolphinQt/Config/FilesystemWidget.cpp:154 msgid "Install Partition (%1)" msgstr "安装分区 (%1)" #: Source/Core/DolphinQt/Updater.cpp:86 msgid "Install Update" msgstr "安装更新" #: Source/Core/DolphinQt/MenuBar.cpp:273 msgid "Install WAD..." msgstr "安装 WAD..." #: Source/Core/DolphinQt/GameList/GameList.cpp:444 msgid "Install to the NAND" msgstr "安装至 NAND" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:157 msgid "Instr." msgstr "指令。" #: Source/Core/DolphinQt/Debugger/AssembleInstructionDialog.cpp:46 #: Source/Core/DolphinQt/Debugger/PatchInstructionDialog.cpp:19 msgid "Instruction" msgstr "指令" #: Source/Core/DolphinQt/Debugger/BreakpointDialog.cpp:101 msgid "Instruction Breakpoint" msgstr "指令断点" #: Source/Core/DolphinQt/MenuBar.cpp:1768 msgid "Instruction:" msgstr "指令:" #: Source/Core/DolphinQt/Debugger/AssembleInstructionDialog.cpp:123 #: Source/Core/DolphinQt/Debugger/PatchInstructionDialog.cpp:59 msgid "Instruction: %1" msgstr "指令: %1" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:735 msgid "" "Instructions executed: %1\n" "Value contained in:\n" "Registers: %2\n" "Memory: %3" msgstr "" "执行的指令： %1\n" "值包含在：\n" "寄存器： %2\n" "内存： %3" #. i18n: Refers to the intensity of shaking an emulated wiimote. #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Force.cpp:141 msgid "Intensity" msgstr "强度" #: Source/Core/DolphinQt/Config/SettingsWindow.cpp:38 msgid "Interface" msgstr "界面" #: Source/Core/Core/State.cpp:669 msgid "Internal LZ4 Error - Tried decompressing {0} bytes" msgstr "内部 LZ4 错误 - 已尝试解压缩 {0} 字节" #: Source/Core/Core/State.cpp:334 msgid "Internal LZ4 Error - compression failed" msgstr "内部 LZ4 错误 - 压缩失败" #: Source/Core/Core/State.cpp:689 msgid "Internal LZ4 Error - decompression failed ({0}, {1}, {2})" msgstr "内部 LZ4 错误 - 解压失败 ({0}, {1}, {2})" #: Source/Core/Core/State.cpp:702 msgid "Internal LZ4 Error - payload size mismatch ({0} / {1}))" msgstr "内部 LZ4 错误 - 有效载荷大小不匹配 ({0} / {1}))" #: Source/Core/Core/NetPlayCommon.cpp:67 Source/Core/Core/NetPlayCommon.cpp:151 msgid "Internal LZO Error - compression failed" msgstr "内部 LZO 错误 - 压缩失败" #: Source/Core/Core/NetPlayCommon.cpp:208 #: Source/Core/Core/NetPlayCommon.cpp:291 msgid "Internal LZO Error - decompression failed" msgstr "内部 LZO 错误 - 解压失败" #: Source/Core/Core/State.cpp:533 msgid "" "Internal LZO Error - decompression failed ({0}) ({1}) \n" "Unable to retrieve outdated savestate version info." msgstr "" "内部 LZO 错误 - 解压失败 ({0}) ({1}) \n" "无法检索过时的存储状态版本信息。" #: Source/Core/Core/State.cpp:546 msgid "" "Internal LZO Error - failed to parse decompressed version cookie and version " "string length ({0})" msgstr "内部 LZO 错误 - 无法解析解压缩的版本 cookie 和版本字符串长度 ({0})" #: Source/Core/Core/State.cpp:563 msgid "" "Internal LZO Error - failed to parse decompressed version string ({0} / {1})" msgstr "内部 LZO 错误 - 无法解析解压缩的版本字符串 ({0} / {1})" #: Source/Core/Core/HotkeyManager.cpp:347 #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:618 #: Source/Core/DolphinQt/Config/Mapping/HotkeyGraphics.cpp:27 msgid "Internal Resolution" msgstr "内部分辨率" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:164 msgid "Internal Resolution:" msgstr "内部分辨率：" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:556 msgid "Internal error while generating AR code." msgstr "生成 AR 代码时出现内部错误。" #: Source/Core/DolphinQt/Settings/AdvancedPane.cpp:31 msgid "Interpreter (slowest)" msgstr "解释器（最慢）" #: Source/Core/DolphinQt/MenuBar.cpp:836 msgid "Interpreter Core" msgstr "解释器核心" #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:707 msgid "Invalid Expression." msgstr "无效表达式。" #: Source/Core/UICommon/AutoUpdate.cpp:214 msgid "Invalid JSON received from auto-update service : {0}" msgstr "从自动更新服务接收到无效的 JSON 数据：{0}" #: Source/Core/DolphinQt/Config/CheatCodeEditor.cpp:166 msgid "Invalid Mixed Code" msgstr "无效混合代码" #: Source/Core/DolphinQt/MainWindow.cpp:313 msgid "Invalid Pack %1 provided: %2" msgstr "包 %1 无效: %2" #: Source/Core/DolphinQt/NetPlay/ChunkedProgressDialog.cpp:26 #: Source/Core/DolphinQt/NetPlay/GameDigestDialog.cpp:23 msgid "Invalid Player ID" msgstr "无效玩家 ID" #: Source/Core/DolphinQt/MenuBar.cpp:1324 msgid "Invalid RSO module address: %1" msgstr "无效 RSO 模块地址: %1" #: Source/Core/DolphinQt/Debugger/CodeWidget.cpp:352 msgid "Invalid callstack" msgstr "无效调用堆栈" #: Source/Core/DolphinQt/GCMemcardManager.cpp:841 msgid "Invalid checksums." msgstr "无效校验和。" #: Source/Core/DolphinQt/RiivolutionBootWidget.cpp:158 msgid "Invalid game." msgstr "无效游戏。" #: Source/Core/Core/NetPlayClient.cpp:1984 msgid "Invalid host" msgstr "无效主机" #: Source/Core/DolphinQt/Debugger/BreakpointDialog.cpp:256 msgid "Invalid input for the field \"%1\"" msgstr "字段 \"%1\" 的输入无效" #: Source/Core/DolphinQt/Debugger/RegisterColumn.cpp:86 #: Source/Core/DolphinQt/Debugger/WatchWidget.cpp:431 msgid "Invalid input provided" msgstr "提供的输入无效" #: Source/Core/InputCommon/ControlReference/ExpressionParser.cpp:457 msgid "Invalid literal." msgstr "无效字面。" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:372 msgid "Invalid parameters given to search." msgstr "提供的搜索参数无效。" #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:316 msgid "Invalid password provided." msgstr "提交的密码无效。" #: Source/Core/Core/Movie.cpp:937 msgid "Invalid recording file" msgstr "无效录制文件" #: Source/Core/DolphinQt/FIFO/FIFOAnalyzer.cpp:397 msgid "Invalid search parameters (no object selected)" msgstr "无效的搜索参数（没有选择对象）" #: Source/Core/DolphinQt/FIFO/FIFOAnalyzer.cpp:424 msgid "Invalid search string (couldn't convert to number)" msgstr "无效的搜索字符串（无法转换成数字）" #: Source/Core/DolphinQt/FIFO/FIFOAnalyzer.cpp:407 msgid "Invalid search string (only even string lengths supported)" msgstr "无效的搜索字符串（仅支持相等长度的字符串）" #: Source/Core/DolphinQt/Main.cpp:211 msgid "Invalid title ID." msgstr "无效游戏 ID" #: Source/Core/DolphinQt/Debugger/WatchWidget.cpp:282 msgid "Invalid watch address: %1" msgstr "无效监视地址： %1" #: Source/Core/DiscIO/Enums.cpp:92 #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:88 #: Source/Core/DolphinQt/Settings/WiiPane.cpp:173 msgid "Italian" msgstr "意大利语" #: Source/Core/DiscIO/Enums.cpp:42 msgid "Italy" msgstr "意大利" #. i18n: One of the figure types in the Skylanders games. #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:426 msgid "Item" msgstr "物品" #: Source/Core/DolphinQt/MenuBar.cpp:834 msgid "JIT" msgstr "JIT" #: Source/Core/DolphinQt/MenuBar.cpp:848 msgid "JIT Block Linking Off" msgstr "关闭 JIT 区块链接" #: Source/Core/DolphinQt/Debugger/JITWidget.cpp:24 msgid "JIT Blocks" msgstr "JIT 区块" #: Source/Core/DolphinQt/MenuBar.cpp:972 msgid "JIT Branch Off" msgstr "关闭 JIT 分支" #: Source/Core/DolphinQt/MenuBar.cpp:944 msgid "JIT FloatingPoint Off" msgstr "关闭 JIT 浮点" #: Source/Core/DolphinQt/MenuBar.cpp:951 msgid "JIT Integer Off" msgstr "关闭 JIT 整数" #: Source/Core/DolphinQt/MenuBar.cpp:929 msgid "JIT LoadStore Floating Off" msgstr "关闭 JIT 加载存储浮动" #: Source/Core/DolphinQt/MenuBar.cpp:901 msgid "JIT LoadStore Off" msgstr "关闭 JIT 加载存储" #: Source/Core/DolphinQt/MenuBar.cpp:937 msgid "JIT LoadStore Paired Off" msgstr "关闭 JIT 加载存储配对" #: Source/Core/DolphinQt/MenuBar.cpp:915 msgid "JIT LoadStore lXz Off" msgstr "关闭 JIT 加载存储 IXz" #: Source/Core/DolphinQt/MenuBar.cpp:908 msgid "JIT LoadStore lbzx Off" msgstr "关闭 JIT 加载存储 Ibzx" #: Source/Core/DolphinQt/MenuBar.cpp:922 msgid "JIT LoadStore lwz Off" msgstr "关闭 JIT 加载存储 Iwz" #: Source/Core/DolphinQt/MenuBar.cpp:895 msgid "JIT Off (JIT Core)" msgstr "关闭 JIT (JIT 核心)" #: Source/Core/DolphinQt/MenuBar.cpp:958 msgid "JIT Paired Off" msgstr "关闭 JIT 配对" #: Source/Core/DolphinQt/Settings/AdvancedPane.cpp:34 msgid "JIT Recompiler for ARM64 (recommended)" msgstr "适用于 ARM64 的 JIT 重编译器（推荐）" #: Source/Core/DolphinQt/Settings/AdvancedPane.cpp:33 msgid "JIT Recompiler for x86-64 (recommended)" msgstr "适用于 x86-64 的 JIT 重编译器（推荐）" #: Source/Core/DolphinQt/MenuBar.cpp:979 msgid "JIT Register Cache Off" msgstr "关闭 JIT 寄存器缓存" #: Source/Core/DolphinQt/MenuBar.cpp:965 msgid "JIT SystemRegisters Off" msgstr "关闭 JIT 系统寄存器" #: Source/Core/Core/PowerPC/Jit64/Jit.cpp:851 #: Source/Core/Core/PowerPC/JitArm64/Jit.cpp:1007 msgid "" "JIT failed to find code space after a cache clear. This should never happen. " "Please report this incident on the bug tracker. Dolphin will now exit." msgstr "" "清除缓存后，JIT 无法找到代码空间。这应该从不会出现。请在错误跟踪器中上报此事" "件。 Dolphin 即将退出。" #: Source/Core/DiscIO/Enums.cpp:27 Source/Core/DolphinQt/MenuBar.cpp:291 msgid "Japan" msgstr "日本" #: Source/Core/DiscIO/Enums.cpp:77 #: Source/Core/DolphinQt/Settings/WiiPane.cpp:168 msgid "Japanese" msgstr "日语" #. i18n: The translation of this string should be consistent with the translation of the #. string "Western (Windows-1252)". Because of this, you may want to parse "Japanese" as #. "a character encoding which is from Japan / used in Japan" rather than "the Japanese language". #: Source/Core/DolphinQt/GCMemcardCreateNewDialog.cpp:38 msgid "Japanese (Shift-JIS)" msgstr "日本 (Shift-JIS)" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:292 msgid "" "Kaos is the only villain for this trophy and is always unlocked. No need to " "edit anything!" msgstr "Kaos 是这个奖杯的唯一反派，且一直是解锁状态。无需编辑任何内容！" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:676 #: Source/Core/DolphinQt/Debugger/RegisterWidget.cpp:296 msgid "Keep Running" msgstr "保持运行" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:177 msgid "Keep Window on Top" msgstr "窗口置顶" #. i18n: This label is followed by a dropdown where the user can select things like "is equal to" #. or "is less than or equal to", followed by another dropdown where the user can select "any #. value", "last value", or "this value:". These three UI elements are intended to form a sentence #. together. Because the UI elements can't be reordered by a translation, you may have to give #. up on the idea of having them form a sentence depending on the grammar of your target language. #: Source/Core/DolphinQt/CheatSearchWidget.cpp:182 msgid "Keep addresses where value in memory" msgstr "在内存中值的保留地址" #: Source/Core/Core/HW/GCKeyboard.cpp:20 msgid "Keyboard" msgstr "键盘" #: Source/Core/DolphinQt/Config/GamecubeControllersWidget.cpp:45 msgid "Keyboard Controller" msgstr "键盘控制器" #: Source/Core/Core/HW/GCKeyboardEmu.cpp:60 #: Source/Core/Core/HW/GCKeyboardEmu.cpp:64 #: Source/Core/Core/HW/GCKeyboardEmu.cpp:68 #: Source/Core/Core/HW/GCKeyboardEmu.cpp:72 #: Source/Core/Core/HW/GCKeyboardEmu.cpp:76 #: Source/Core/Core/HW/GCKeyboardEmu.cpp:80 msgid "Keys" msgstr "按键" #: Source/Core/UICommon/UICommon.cpp:545 msgid "KiB" msgstr "KiB" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:294 msgid "Kick Player" msgstr "踢除玩家" #: Source/Core/DiscIO/Enums.cpp:45 Source/Core/DolphinQt/MenuBar.cpp:293 msgid "Korea" msgstr "韩国" #: Source/Core/DiscIO/Enums.cpp:104 #: Source/Core/DolphinQt/Settings/WiiPane.cpp:177 msgid "Korean" msgstr "韩语" #. i18n: The left trigger button (labeled L on real controllers) #: Source/Core/Core/HW/GCPadEmu.h:73 #: Source/Core/Core/HW/WiimoteEmu/Extension/Classic.h:236 #: Source/Core/Core/HW/WiimoteEmu/Extension/Shinkansen.cpp:48 msgid "L" msgstr "L" #: Source/Core/DolphinQt/GBAWidget.cpp:393 msgid "L&oad ROM..." msgstr "载入 ROM...(&O)" #. i18n: The left trigger button (labeled L on real controllers) used as an analog input #: Source/Core/Core/HW/GCPadEmu.h:77 #: Source/Core/Core/HW/WiimoteEmu/Extension/Classic.h:240 msgid "L-Analog" msgstr "L-模拟" #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:233 msgid "LR Save" msgstr "LR 保存" #: Source/Core/DolphinQt/Debugger/WatchWidget.cpp:91 msgid "Label" msgstr "标签" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:590 msgid "Last Value" msgstr "上个值" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:153 msgid "Last placed:" msgstr "上次放置：" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:144 msgid "Last reset:" msgstr "上次重置：" #: Source/Core/DolphinQt/Settings/AudioPane.cpp:87 msgid "Latency:" msgstr "延迟:" #: Source/Core/DolphinQt/Settings/AudioPane.cpp:435 msgid "Latency: ~10 ms" msgstr "延迟: ~10 毫秒" #: Source/Core/DolphinQt/Settings/AudioPane.cpp:437 msgid "Latency: ~20 ms" msgstr "延迟: ~20 毫秒" #: Source/Core/DolphinQt/Settings/AudioPane.cpp:441 msgid "Latency: ~40 ms" msgstr "延迟: ~40 毫秒" #: Source/Core/DolphinQt/Settings/AudioPane.cpp:439 msgid "Latency: ~80 ms" msgstr "延迟: ~80 毫秒" #: Source/Core/DolphinQt/NANDRepairDialog.cpp:81 msgid "Launching these titles may also fix the issues." msgstr "运行这些游戏也许可以解决问题。" #: Source/Core/DolphinQt/Achievements/AchievementsWindow.cpp:56 msgid "Leaderboards" msgstr "排行榜" #: Source/Core/Core/FreeLookManager.cpp:90 #: Source/Core/Core/HW/WiimoteEmu/Extension/Shinkansen.cpp:36 #: Source/Core/Core/HW/WiimoteEmu/Extension/TaTaCon.cpp:35 #: Source/Core/DolphinQt/TAS/GCTASInputWindow.cpp:41 #: Source/Core/DolphinQt/TAS/WiiTASInputWindow.cpp:214 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Force.cpp:22 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/IMUAccelerometer.cpp:20 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Slider.cpp:21 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Tilt.cpp:22 #: Source/Core/InputCommon/ControllerEmu/ControllerEmu.h:26 msgid "Left" msgstr "左" #: Source/Core/Core/HW/WiimoteEmu/Extension/Classic.h:220 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:55 #: Source/Core/DolphinQt/TAS/WiiTASInputWindow.cpp:94 msgid "Left Stick" msgstr "左摇杆" #. i18n: "Table" refers to a turntable #: Source/Core/Core/HW/WiimoteEmu/Extension/Turntable.cpp:68 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:166 msgid "Left Table" msgstr "左碟片" #: Source/Core/DolphinQt/TAS/IRWidget.cpp:19 msgid "" "Left click to set the IR value.\n" "Right click to re-center it." msgstr "" "左键单击设置 IR 值。\n" "右键单击重新居中。" #: Source/Core/DolphinQt/TAS/StickWidget.cpp:20 msgid "" "Left click to set the stick value.\n" "Right click to re-center it." msgstr "" "左键单击设置摇杆值。\n" "右键单击重新居中。" #: Source/Core/DolphinQt/Config/Mapping/MappingButton.cpp:82 msgid "" "Left-click to detect input.\n" "Middle-click to clear.\n" "Right-click for more options." msgstr "" "左键单击检测输入。\n" "中键单击清除。\n" "右键单击得到更多选项。" #: Source/Core/DolphinQt/Config/Mapping/MappingButton.cpp:86 msgid "" "Left/Right-click to configure output.\n" "Middle-click to clear." msgstr "" "左/右键单击配置输出。\n" "中键单击清除。" #: Source/Core/Core/HW/WiimoteEmu/Extension/Shinkansen.cpp:47 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:235 msgid "Levers" msgstr "控制杆" #: Source/Core/DolphinQt/AboutDialog.cpp:67 msgid "License" msgstr "许可" #. i18n: One of the elements in the Skylanders games. Japanese: ライフ. For official translations #. in other languages, check the SuperChargers manual at https://support.activision.com/manuals #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:355 msgid "Life" msgstr "生命" #: Source/Core/Core/HW/WiimoteEmu/Extension/DrawsomeTablet.cpp:35 #: Source/Core/Core/HW/WiimoteEmu/Extension/UDrawTablet.cpp:53 msgid "Lift" msgstr "举起" #. i18n: Noun. This is used as a label for a control group that represents lights on controllers. #. i18n: One of the elements in the Skylanders games. For official translations #. in other languages, check the SuperChargers manual at https://support.activision.com/manuals #: Source/Core/Core/HW/WiimoteEmu/Extension/Shinkansen.cpp:52 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:239 #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:368 msgid "Light" msgstr "光" #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:141 msgid "Limit Chunked Upload Speed:" msgstr "限制数据块上传速度:" #: Source/Core/DolphinQt/MenuBar.cpp:668 msgid "List Columns" msgstr "表单列" #: Source/Core/DolphinQt/MenuBar.cpp:631 msgid "List View" msgstr "列表视图" #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:96 msgid "Listening" msgstr "正在监听" #: Source/Core/DolphinQt/Config/Mapping/HotkeyStates.cpp:23 #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:131 #: Source/Core/DolphinQt/Debugger/BreakpointWidget.cpp:115 #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:105 #: Source/Core/DolphinQt/Debugger/WatchWidget.cpp:104 #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:109 msgid "Load" msgstr "载入" #: Source/Core/DolphinQt/MenuBar.cpp:1004 msgid "Load &Bad Map File..." msgstr "载入损坏映射文件(&B)..." #: Source/Core/DolphinQt/MenuBar.cpp:1003 msgid "Load &Other Map File..." msgstr "载入其他映射文件(&O)..." #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:102 msgid "Load Custom Textures" msgstr "加载自定义纹理" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:126 msgid "Load File" msgstr "载入文件" #: Source/Core/DolphinQt/MenuBar.cpp:258 msgid "Load GameCube Main Menu" msgstr "载入 GameCube 主菜单" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:146 msgid "Load Host's Save Data Only" msgstr "仅加载主机的存档数据" #: Source/Core/Core/HotkeyManager.cpp:356 #: Source/Core/DolphinQt/Config/Mapping/HotkeyStatesOther.cpp:22 msgid "Load Last State" msgstr "载入最近状态" #: Source/Core/DolphinQt/Settings/PathPane.cpp:211 msgid "Load Path:" msgstr "加载路径:" #: Source/Core/Core/HotkeyManager.cpp:185 msgid "Load ROM" msgstr "载入 ROM" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:128 msgid "Load Slot" msgstr "载入插槽" #: Source/Core/Core/HotkeyManager.cpp:181 #: Source/Core/Core/HotkeyManager.cpp:353 msgid "Load State" msgstr "载入状态" #: Source/Core/Core/HotkeyManager.cpp:166 msgid "Load State Last 1" msgstr "载入最近状态 1" #: Source/Core/Core/HotkeyManager.cpp:175 msgid "Load State Last 10" msgstr "载入最近状态 10" #: Source/Core/Core/HotkeyManager.cpp:167 msgid "Load State Last 2" msgstr "载入最近状态 2" #: Source/Core/Core/HotkeyManager.cpp:168 msgid "Load State Last 3" msgstr "载入最近状态 3" #: Source/Core/Core/HotkeyManager.cpp:169 msgid "Load State Last 4" msgstr "载入最近状态 4" #: Source/Core/Core/HotkeyManager.cpp:170 msgid "Load State Last 5" msgstr "载入最近状态 5" #: Source/Core/Core/HotkeyManager.cpp:171 msgid "Load State Last 6" msgstr "载入最近状态 6" #: Source/Core/Core/HotkeyManager.cpp:172 msgid "Load State Last 7" msgstr "载入最近状态 7" #: Source/Core/Core/HotkeyManager.cpp:173 msgid "Load State Last 8" msgstr "载入最近状态 8" #: Source/Core/Core/HotkeyManager.cpp:174 msgid "Load State Last 9" msgstr "载入最近状态 9" #: Source/Core/Core/HotkeyManager.cpp:131 msgid "Load State Slot 1" msgstr "载入状态 1" #: Source/Core/Core/HotkeyManager.cpp:140 msgid "Load State Slot 10" msgstr "载入状态 10" #: Source/Core/Core/HotkeyManager.cpp:132 msgid "Load State Slot 2" msgstr "载入状态 2" #: Source/Core/Core/HotkeyManager.cpp:133 msgid "Load State Slot 3" msgstr "载入状态 3" #: Source/Core/Core/HotkeyManager.cpp:134 msgid "Load State Slot 4" msgstr "载入状态 4" #: Source/Core/Core/HotkeyManager.cpp:135 msgid "Load State Slot 5" msgstr "载入状态 5" #: Source/Core/Core/HotkeyManager.cpp:136 msgid "Load State Slot 6" msgstr "载入状态 6" #: Source/Core/Core/HotkeyManager.cpp:137 msgid "Load State Slot 7" msgstr "载入状态 7" #: Source/Core/Core/HotkeyManager.cpp:138 msgid "Load State Slot 8" msgstr "载入状态 8" #: Source/Core/Core/HotkeyManager.cpp:139 msgid "Load State Slot 9" msgstr "载入状态 9" #: Source/Core/DolphinQt/MenuBar.cpp:350 msgid "Load State from File" msgstr "从文件中载入状态" #: Source/Core/DolphinQt/MenuBar.cpp:351 msgid "Load State from Selected Slot" msgstr "从选择的插槽中加载状态" #: Source/Core/DolphinQt/MenuBar.cpp:352 msgid "Load State from Slot" msgstr "从插槽中载入状态" #: Source/Core/DolphinQt/MenuBar.cpp:1046 msgid "Load Wii System Menu %1" msgstr "加载 Wii 系统菜单 %1" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:151 msgid "Load and Write Host's Save Data" msgstr "加载和写入主机的存档数据" #: Source/Core/Core/HotkeyManager.cpp:141 msgid "Load from Selected Slot" msgstr "从选择的插槽中加载" #: Source/Core/DolphinQt/MenuBar.cpp:406 msgid "Load from Slot %1 - %2" msgstr "从插槽 %1 - %2 载入" #: Source/Core/DolphinQt/MenuBar.cpp:1553 #: Source/Core/DolphinQt/MenuBar.cpp:1570 msgid "Load map file" msgstr "载入映射文件" #: Source/Core/DolphinQt/MenuBar.cpp:1045 msgid "Load vWii System Menu %1" msgstr "加载 vWii 系统菜单 %1" #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:150 msgid "Load..." msgstr "载入..." #: Source/Core/DolphinQt/MenuBar.cpp:1535 msgid "Loaded symbols from '%1'" msgstr "已从 '%1' 中加载符号" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:321 msgid "" "Loads custom textures from User/Load/Textures/<game_id>/ and User/Load/" "DynamicInputTextures/<game_id>/.

If unsure, " "leave this unchecked." msgstr "" "加载 User/Load/Textures/<game_id>/ 和 User/Load/DynamicInputTextures/" "<game_id>/ 目录中的自定义纹理。

如无法确定，请" "不要选中此项。" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:339 msgid "" "Loads graphics mods from User/Load/GraphicsMods/." "

If unsure, leave this unchecked." msgstr "" "从 User/Load/GraphicsMods/ 加载图形模组。

如无法确" "定，请不要选中此项。" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:527 msgid "Local" msgstr "本地" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:202 msgid "Lock Mouse Cursor" msgstr "锁定鼠标光标" #: Source/Core/DolphinQt/Achievements/AchievementProgressWidget.cpp:156 #: Source/Core/DolphinQt/Debugger/WatchWidget.cpp:97 msgid "Locked" msgstr "已锁定" #: Source/Core/DolphinQt/Config/LogWidget.cpp:34 #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:236 msgid "Log" msgstr "日志" #: Source/Core/DolphinQt/Config/LogConfigWidget.cpp:22 msgid "Log Configuration" msgstr "日志设置" #: Source/Core/DolphinQt/Achievements/AchievementSettingsWidget.cpp:59 msgid "Log In" msgstr "登录" #: Source/Core/DolphinQt/MenuBar.cpp:889 msgid "Log JIT Instruction Coverage" msgstr "记录 JIT 指令范围" #: Source/Core/DolphinQt/Achievements/AchievementSettingsWidget.cpp:60 msgid "Log Out" msgstr "注销" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:67 msgid "Log Render Time to File" msgstr "记录渲染时间到文件" #: Source/Core/DolphinQt/Config/LogConfigWidget.cpp:59 msgid "Log Types" msgstr "日志类型" #: Source/Core/DolphinQt/Config/LogConfigWidget.cpp:52 msgid "Logger Outputs" msgstr "日志输出" #: Source/Core/DolphinQt/Achievements/AchievementSettingsWidget.cpp:61 msgid "Login Failed" msgstr "登录失败" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:288 msgid "" "Logs the render time of every frame to User/Logs/render_time.txt.

Use " "this feature to measure Dolphin's performance.

If " "unsure, leave this unchecked." msgstr "" "将每帧的渲染时间记录于 User/Logs/render_time.txt 文件。

启用此功能可衡" "量 Dolphin 的性能。

如无法确定，请不要选中此项。" #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:125 msgid "Loop" msgstr "循环" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:976 msgid "Lost connection to NetPlay server..." msgstr "丢失联机服务器连接..." #: Source/Core/DolphinQt/Config/VerifyWidget.cpp:202 #: Source/Core/DolphinQt/Settings/AudioPane.cpp:422 msgid "Low" msgstr "低" #: Source/Core/DolphinQt/Settings/AudioPane.cpp:420 msgid "Lowest" msgstr "最低" #: Source/Core/DolphinQt/Config/VerifyWidget.cpp:75 msgid "MD5:" msgstr "MD5:" #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:212 msgid "MMU" msgstr "MMU" #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:289 msgid "MORIBUND" msgstr "即将结束" #: Source/Core/DolphinQt/GCMemcardManager.cpp:401 msgid "MadCatz Gameshark files" msgstr "MadCatz Gameshark 文件" #. i18n: One of the elements in the Skylanders games. Japanese: まほう. For official translations #. in other languages, check the SuperChargers manual at https://support.activision.com/manuals #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:340 msgid "Magic" msgstr "魔法" #: Source/Core/DolphinQt/TAS/GCTASInputWindow.cpp:29 msgid "Main Stick" msgstr "主摇杆" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:219 msgid "Make sure that the hero level value is between 0 and 100!" msgstr "请确保英雄等级在 0 至 100 之间！" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:242 msgid "Make sure that the last placed datetime value is valid!" msgstr "请确保上次放置的时间是有效的！" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:236 msgid "Make sure that the last reset datetime value is valid!" msgstr "请确保上次重置的时间是有效的！" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:213 msgid "Make sure that the money value is between 0 and 65000!" msgstr "请确保金钱数量在 0 至 65000 之间！" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:225 msgid "Make sure that the nickname is between 0 and 15 characters long!" msgstr "请确保昵称长度为 0 至 15 个字符！" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:231 msgid "Make sure that the playtime value is valid!" msgstr "请确保游玩时间是有效的！" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:663 msgid "Make sure there is a Skylander in slot %1!" msgstr "请确保 Skylander 已位于插槽 %1 中！" #: Source/Core/DolphinQt/GameList/GameList.cpp:1004 #: Source/Core/DolphinQt/GameList/GameListModel.cpp:222 #: Source/Core/DolphinQt/MenuBar.cpp:656 msgid "Maker" msgstr "制作者" #: Source/Core/DolphinQt/Config/InfoWidget.cpp:124 #: Source/Core/DolphinQt/Config/InfoWidget.cpp:157 msgid "Maker:" msgstr "制作者：" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:570 msgid "" "Makes distant objects more visible by removing fog, thus increasing the " "overall detail.

Disabling fog will break some games which rely on " "proper fog emulation.

If unsure, leave this " "unchecked." msgstr "" "通过移除雾提升远处对象的可见性，进而增加整体细节。

有些游戏依赖正确的" "雾模拟，禁用雾将破坏其游戏性。

如无法确定，请不要选" "中此项。" #: Source/Core/DolphinQt/MenuBar.cpp:274 msgid "Manage NAND" msgstr "管理 NAND" #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:93 #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:188 msgid "Manual Texture Sampling" msgstr "手动纹理采样" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:635 msgid "Mapping" msgstr "映射" #: Source/Core/Core/HW/EXI/EXI_Device.h:96 msgid "Mask ROM" msgstr "伪装 ROM" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:844 msgid "Match Found" msgstr "找到匹配" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:958 msgid "Max Buffer:" msgstr "最大缓冲区:" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:926 msgid "Max buffer size changed to %1" msgstr "最大缓冲区大小更改为 %1" #. i18n: Refers to tilting an emulated Wii Remote. #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Tilt.cpp:32 msgid "Maximum tilt angle." msgstr "最大倾斜角度。" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:194 msgid "May cause slow down in Wii Menu and some games." msgstr "这会导致 Wii 菜单和一些游戏减速。" #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:228 #: Source/Core/DolphinQt/Config/VerifyWidget.cpp:205 msgid "Medium" msgstr "中等" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:45 msgid "Memory" msgstr "内存" #: Source/Core/DolphinQt/Debugger/BreakpointDialog.cpp:119 msgid "Memory Breakpoint" msgstr "内存断点" #: Source/Core/Core/HW/EXI/EXI_Device.h:95 msgid "Memory Card" msgstr "存储卡" #: Source/Core/DolphinQt/MenuBar.cpp:267 msgid "Memory Card Manager" msgstr "存储卡管理器" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:109 msgid "Memory Card Path:" msgstr "存储卡路径：" #: Source/Core/DolphinQt/Settings/AdvancedPane.cpp:120 msgid "Memory Override" msgstr "内存覆盖" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:220 msgid "Memory breakpoint options" msgstr "内存断点选项" #: Source/Core/Core/HW/GCMemcard/GCMemcardRaw.cpp:203 msgid "MemoryCard: ClearBlock called on invalid address ({0:#x})" msgstr "MemoryCard: ClearBlock 在无效地址 ({0:#x}) 中调用" #: Source/Core/Core/HW/GCMemcard/GCMemcardRaw.cpp:174 msgid "MemoryCard: Read called with invalid source address ({0:#x})" msgstr "MemoryCard: 在无效源地址 ({0:#x}) 中读取调用" #: Source/Core/Core/HW/GCMemcard/GCMemcardRaw.cpp:186 msgid "MemoryCard: Write called with invalid destination address ({0:#x})" msgstr "MemoryCard: 在无效目标地址 ({0:#x}) 中写入调用" #: Source/Core/DolphinQt/MainWindow.cpp:1794 msgid "" "Merging a new NAND over your currently selected NAND will overwrite any " "channels and savegames that already exist. This process is not reversible, " "so it is recommended that you keep backups of both NANDs. Are you sure you " "want to continue?" msgstr "" "将新 NAND 合并入当前 NAND 将会覆盖所有现有的频道与存档。此过程不可逆，建议您" "对两份 NAND 都进行备份。确定继续？" #: Source/Core/UICommon/UICommon.cpp:545 msgid "MiB" msgstr "MiB" #: Source/Core/Core/HW/EXI/EXI_Device.h:99 Source/Core/Core/HW/GCPadEmu.h:62 #: Source/Core/DolphinQt/Config/Mapping/GCMicrophone.cpp:26 #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:422 msgid "Microphone" msgstr "麦克风" #. i18n: One of the figure types in the Skylanders games. #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:424 msgid "Mini" msgstr "迷你" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:155 msgid "Misc" msgstr "其它" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:152 msgid "Misc Settings" msgstr "其它设置" #: Source/Core/DolphinQt/GCMemcardManager.cpp:844 msgid "Mismatch between free block count in header and actually unused blocks." msgstr "标头中的空闲区块数与实际未使用的区块不匹配。" #: Source/Core/DolphinQt/GCMemcardManager.cpp:847 msgid "Mismatch between internal data structures." msgstr "内部数据结构不匹配。" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:1107 msgid "" "Mismatched ROMs\n" "Selected: {0}\n" "- Title: {1}\n" "- Hash: {2:02X}\n" "Expected:\n" "- Title: {3}\n" "- Hash: {4:02X}" msgstr "" "不匹配的 ROM\n" "已选择： {0}\n" "- 标题： {1}\n" "- 校验： {2:02X}\n" "应为：\n" "- 标题： {3}\n" "- 校验： {4:02X}" #: Source/Core/InputCommon/ControllerEmu/ControlGroup/AnalogStick.cpp:32 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Tilt.cpp:25 msgid "Modifier" msgstr "修饰键" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:298 msgid "" "Modifies textures to show the format they're encoded in.

May require " "an emulation reset to apply.

If unsure, leave this " "unchecked." msgstr "" "修改纹理以显示以其编码格式。

可能需要重置模拟才能生效。" "

如无法确定，请不要选中此项。" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:129 msgid "Modify Slot" msgstr "修改插槽" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:60 msgid "Modifying Skylander: %1" msgstr "修改 Skylander: %1" #: Source/Core/DolphinQt/MenuBar.cpp:1344 #: Source/Core/DolphinQt/MenuBar.cpp:1494 msgid "Modules found: %1" msgstr "已找到模块: %1" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:124 msgid "Money:" msgstr "金钱：" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:181 msgid "Mono" msgstr "单声道" #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:134 msgid "Monoscopic Shadows" msgstr "单视场阴影" #: Source/Core/DolphinQt/Config/LogWidget.cpp:138 msgid "Monospaced Font" msgstr "等宽字体" #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:433 msgid "Motion Input" msgstr "体感输入" #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:432 msgid "Motion Simulation" msgstr "体感模拟" #: Source/Core/Core/HW/GCPadEmu.cpp:79 #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.cpp:285 msgid "Motor" msgstr "马达" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:184 msgid "Mouse Cursor Visibility" msgstr "鼠标光标可见" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:190 msgid "" "Mouse Cursor hides after inactivity and returns upon Mouse Cursor movement." msgstr "鼠标光标在不活动后隐藏并在光标移动时可见。" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:195 msgid "Mouse Cursor will always be visible." msgstr "鼠标光标将始终可见。" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:193 msgid "Mouse Cursor will never be visible while a game is running." msgstr "游戏运行时鼠标光标将一直不可见。" #: Source/Core/Core/FreeLookManager.cpp:86 #: Source/Core/DolphinQt/Config/Mapping/FreeLookGeneral.cpp:22 msgid "Move" msgstr "移动" #: Source/Core/Core/HotkeyManager.cpp:337 #: Source/Core/DolphinQt/Config/Mapping/HotkeyTAS.cpp:23 msgid "Movie" msgstr "影片" #: Source/Core/Core/Movie.cpp:978 msgid "" "Movie {0} indicates that it starts from a savestate, but {1} doesn't exist. " "The movie will likely not sync!" msgstr "影片 {0} 表示从一个保存状态开始播放，但 {1} 不存在。电影可能无法同步！" #. i18n: Controller input values are multiplied by this percentage value. #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:342 msgid "Multiplier" msgstr "多重分插器" #: qtbase/src/gui/kernel/qplatformtheme.cpp:722 msgid "N&o to All" msgstr "全部选否(&O)" #: Source/Core/DolphinQt/MenuBar.cpp:1175 #: Source/Core/DolphinQt/MenuBar.cpp:1184 #: Source/Core/DolphinQt/MenuBar.cpp:1202 #: Source/Core/DolphinQt/MenuBar.cpp:1206 #: Source/Core/DolphinQt/NANDRepairDialog.cpp:29 msgid "NAND Check" msgstr "NAND 校验" #: Source/Core/DolphinQt/NKitWarningDialog.cpp:32 msgid "NKit Warning" msgstr "NKit 警告" #: Source/Core/DiscIO/Enums.cpp:121 Source/Core/DolphinQt/MenuBar.cpp:260 #: Source/Core/DolphinQt/Settings/GeneralPane.cpp:219 msgid "NTSC-J" msgstr "NTSC-J" #: Source/Core/DolphinQt/Config/Graphics/ColorCorrectionConfigWindow.cpp:69 msgid "NTSC-J (ARIB TR-B9)" msgstr "NTSC-J (ARIB TR-B9)" #: Source/Core/DiscIO/Enums.cpp:130 #: Source/Core/DolphinQt/Settings/GeneralPane.cpp:219 msgid "NTSC-K" msgstr "NTSC-K" #: Source/Core/DolphinQt/Config/Graphics/ColorCorrectionConfigWindow.cpp:69 msgid "NTSC-M (SMPTE 170M)" msgstr "NTSC-M (SMPTE 170M)" #: Source/Core/DolphinQt/Config/Graphics/ColorCorrectionConfigWindow.cpp:42 msgid "" "NTSC-M and NTSC-J target gamma ~2.2. PAL targets gamma ~2.8.
None of the " "two were necessarily followed by games or TVs.
2.35 is a good generic " "value for all regions.

If a game allows you to chose a gamma value, " "match it here.

If unsure, leave this at 2.35." msgstr "" "NTSC-M 和 NTSC-J 标准伽玛值约为 2.2。PAL 的标准伽玛值约为 2.8。
游戏或电视" "不一定遵循这两者。
2.35 是一个很好的通用值。

如果游戏允许您选择伽玛" "值，请在此处进行设置。

如无法确定，请保持为 2.35。" #: Source/Core/DiscIO/Enums.cpp:124 Source/Core/DolphinQt/MenuBar.cpp:262 #: Source/Core/DolphinQt/Settings/GeneralPane.cpp:219 msgid "NTSC-U" msgstr "NTSC-U" #: Source/Core/DolphinQt/Config/FilesystemWidget.cpp:61 #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:330 #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:352 #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:223 #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:164 #: Source/Core/DolphinQt/ResourcePackManager.cpp:92 msgid "Name" msgstr "名称" #: Source/Core/DolphinQt/GameList/GameList.cpp:1123 msgid "Name for a new tag:" msgstr "命名一个新标签:" #: Source/Core/DolphinQt/GameList/GameList.cpp:1135 msgid "Name of the tag to remove:" msgstr "要移除的标签名:" #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:163 msgid "Name of your session shown in the server browser" msgstr "在服务器浏览器中所显示的会话名称" #: Source/Core/DolphinQt/Config/CheatCodeEditor.cpp:87 #: Source/Core/DolphinQt/Config/GeckoCodeWidget.cpp:116 #: Source/Core/DolphinQt/Config/InfoWidget.cpp:121 #: Source/Core/DolphinQt/Config/InfoWidget.cpp:156 #: Source/Core/DolphinQt/Config/InfoWidget.cpp:163 #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:109 msgid "Name:" msgstr "名称：" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:69 msgid "Native (640x528)" msgstr "原生 (640x528)" #: Source/Core/DolphinQt/GCMemcardManager.cpp:399 #: Source/Core/DolphinQt/GCMemcardManager.cpp:406 msgid "Native GCI File" msgstr "内部 GCI 文件" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:99 msgid "NetPlay" msgstr "联机" #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:34 msgid "NetPlay Session Browser" msgstr "联机会话浏览器" #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:34 msgid "NetPlay Setup" msgstr "联机设定" #: Source/Core/DiscIO/Enums.cpp:48 msgid "Netherlands" msgstr "荷兰" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:153 msgid "" "Netplay will start using the Host's save data, and any save data created or " "modified during the Netplay session will remain in the Host's local saves." msgstr "" "联机将开始使用主机的存档数据，并且在联机会话期间创建或修改的任何存档数据都将" "保留在主机的本地存档中。" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:148 msgid "" "Netplay will start using the Host's save data, but any save data created or " "modified during the Netplay session will be discarded at the end of the " "session." msgstr "" "联机将开始使用主机的存档数据，但在联机会话期间创建或修改的任何存档数据都将在" "会话结束时被丢弃。" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:143 msgid "" "Netplay will start without any save data, and any created save data will be " "discarded at the end of the Netplay session." msgstr "" "联机将在没有任何存档数据的情况下开始，并且任何创建的存档数据都将在联机会话结" "束时被丢弃。" #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:147 #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:182 msgid "Network" msgstr "网络" #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:384 msgid "Network dump format:" msgstr "网络转储格式：" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:191 msgid "Never" msgstr "从不" #: Source/Core/DolphinQt/Updater.cpp:84 msgid "Never Auto-Update" msgstr "不要自动更新" #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:365 #: Source/Core/DolphinQt/Debugger/BreakpointWidget.cpp:111 #: Source/Core/DolphinQt/Debugger/WatchWidget.cpp:101 msgid "New" msgstr "新" #: Source/Core/DolphinQt/Debugger/BreakpointDialog.cpp:28 msgid "New Breakpoint" msgstr "新断点" #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:706 msgid "New File" msgstr "新建文件" #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:708 msgid "New File (%1)" msgstr "新建文件 (%1)" #: Source/Core/DolphinQt/CheatSearchFactoryWidget.cpp:122 msgid "New Search" msgstr "新建搜索" #: Source/Core/DolphinQt/GameList/GameList.cpp:522 msgid "New Tag..." msgstr "新标签..." #: Source/Core/DolphinQt/Settings/GeneralPane.cpp:379 msgid "New identity generated." msgstr "已生成新的标识。" #: Source/Core/DolphinQt/Debugger/PatchInstructionDialog.cpp:35 msgid "New instruction:" msgstr "新指令:" #: Source/Core/DolphinQt/GameList/GameList.cpp:1123 msgid "New tag" msgstr "新标签" #: Source/Core/Core/HotkeyManager.cpp:91 Source/Core/Core/HotkeyManager.cpp:95 #: Source/Core/Core/HotkeyManager.cpp:99 Source/Core/Core/HotkeyManager.cpp:103 msgid "Next Game Profile" msgstr "下一个游戏预设" #: Source/Core/DolphinQt/FIFO/FIFOAnalyzer.cpp:87 msgid "Next Match" msgstr "匹配下一个" #: Source/Core/Core/HotkeyManager.cpp:89 Source/Core/Core/HotkeyManager.cpp:93 #: Source/Core/Core/HotkeyManager.cpp:97 Source/Core/Core/HotkeyManager.cpp:101 msgid "Next Profile" msgstr "下一个预设" #: Source/Core/Core/NetPlayClient.cpp:293 msgid "Nickname is too long." msgstr "昵称太长。" #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:199 #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:134 msgid "Nickname:" msgstr "昵称：" #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:105 #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:244 #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:245 msgid "No" msgstr "否" #: Source/Core/DolphinQt/Config/Mapping/GCPadWiiUConfigDialog.cpp:79 msgid "No Adapter Detected" msgstr "未检测到适配器" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:204 msgid "No Alignment" msgstr "未对齐" #: Source/Core/Core/Config/MainSettings.h:17 msgid "No Audio Output" msgstr "无音频输出" #: Source/Core/DolphinQt/Config/InfoWidget.cpp:69 #: Source/Core/DolphinQt/ConvertDialog.cpp:217 #: Source/Core/DolphinQt/GameList/GameListModel.cpp:187 msgid "No Compression" msgstr "不压缩" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:856 msgid "No Match" msgstr "无匹配" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:141 msgid "No Save Data" msgstr "无存档数据" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:82 msgid "No data to modify!" msgstr "没有可修改的数据！" #: Source/Core/DolphinQt/FIFO/FIFOAnalyzer.cpp:542 #: Source/Core/DolphinQt/FIFO/FIFOAnalyzer.cpp:559 #: Source/Core/DolphinQt/FIFO/FIFOAnalyzer.cpp:574 #: Source/Core/DolphinQt/FIFO/FIFOAnalyzer.cpp:726 #: Source/Core/DolphinQt/FIFO/FIFOAnalyzer.cpp:729 #: Source/Core/DolphinQt/FIFO/FIFOAnalyzer.cpp:732 msgid "No description available" msgstr "没有可用的说明" #: Source/Core/DolphinQt/GCMemcardManager.cpp:853 msgid "No errors." msgstr "没有错误。" #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:93 msgid "No extension selected." msgstr "未选择扩展。" #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:325 msgid "No file loaded / recorded." msgstr "文件未加载 / 录制" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:369 msgid "No game is running." msgstr "没有游戏在运行。" #: Source/Core/DolphinQt/CheatSearchFactoryWidget.cpp:164 msgid "No game running." msgstr "没有游戏运行。" #: Source/Core/DolphinQt/Config/GraphicsModListWidget.cpp:196 msgid "No graphics mod selected" msgstr "未选择图形模组" #: Source/Core/DolphinQt/Debugger/AssembleInstructionDialog.cpp:59 #: Source/Core/DolphinQt/Debugger/AssembleInstructionDialog.cpp:107 msgid "No input" msgstr "无输入" #: Source/Core/DolphinQt/MenuBar.cpp:1186 msgid "No issues have been detected." msgstr "没有发现问题。" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:652 msgid "No matching game was found" msgstr "未找到匹配的游戏" #: Source/Core/Core/Boot/Boot.cpp:98 msgid "No paths found in the M3U file \"{0}\"" msgstr "在 M3U 文件 “{0}” 中找不到路径" #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:523 msgid "No possible functions left. Reset." msgstr "未发现可能的函数，重置。" #: Source/Core/DiscIO/VolumeVerifier.cpp:1423 msgid "No problems were found." msgstr "未发现任何问题。" #: Source/Core/DiscIO/VolumeVerifier.cpp:1417 msgid "" "No problems were found. This does not guarantee that this is a good dump, " "but since Wii titles contain a lot of verification data, it does mean that " "there most likely are no problems that will affect emulation." msgstr "" "未发现任何问题。虽然不能保证这是一个正确的转储，但由于 Wii 游戏包含大量的验证" "数据，这表明几乎不会出现影响模拟的问题。" #: Source/Core/InputCommon/InputConfig.cpp:78 msgid "No profiles found for game setting '{0}'" msgstr "没有找到游戏设置 ‘{0}’ 的预设" #: Source/Core/DolphinQt/FIFO/FIFOAnalyzer.cpp:143 msgid "No recording loaded." msgstr "没有录制被载入。" #: Source/Core/DolphinQt/GameList/GameList.cpp:717 #: Source/Core/DolphinQt/GameList/GameList.cpp:779 msgid "No save data found." msgstr "没有找到存档数据。" #: Source/Core/Core/State.cpp:1024 msgid "No undo.dtm found, aborting undo load state to prevent movie desyncs" msgstr "未找到 undo.dtm 文件，为防止影片出现不同步撤销载入状态操作被取消。" #: Source/Core/DolphinQt/Config/GamecubeControllersWidget.cpp:35 #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:330 #: Source/Core/DolphinQt/Config/WiimoteControllersWidget.cpp:143 #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:423 #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:112 #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:130 #: Source/Core/DolphinQt/NetPlay/PadMappingDialog.cpp:80 #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:870 msgid "None" msgstr "无" #: Source/Core/UICommon/NetPlayIndex.cpp:250 msgid "North America" msgstr "北美" #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:96 msgid "Not Set" msgstr "未设置" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:472 msgid "Not all players have the game. Do you really want to start?" msgstr "并不是所有玩家都有该游戏。你真的要开始吗？" #: Source/Core/DolphinQt/GCMemcardManager.cpp:529 #, c-format msgctxt "" msgid "" "Not enough free blocks on the target memory card. At least %n free block(s) " "required." msgstr "目标存储卡上没有足够的空闲区块。至少需要 %n 个区块。 " #: Source/Core/DolphinQt/GCMemcardManager.cpp:522 #, c-format msgctxt "" msgid "" "Not enough free files on the target memory card. At least %n free file(s) " "required." msgstr "目标存储卡上没有足够的空闲文件数。至少需要 %n 个文件数。 " #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:652 msgid "Not found" msgstr "未找到" #: Source/Core/DolphinQt/Config/Mapping/FreeLookRotation.cpp:28 msgid "" "Note: motion input may require configuring alternate input sources before " "use." msgstr "注意：体感输入可能需要在使用前配置备用输入源。" #: Source/Core/DolphinQt/Config/CheatCodeEditor.cpp:83 msgid "Notes:" msgstr "说明：" #: Source/Core/DolphinQt/Config/ControllerInterface/ControllerInterfaceWindow.cpp:41 msgid "Nothing to configure" msgstr "没有需要配置的项目" #: Source/Core/DolphinQt/Config/LogConfigWidget.cpp:45 msgid "Notice" msgstr "提示" #. i18n: Null is referring to the null video backend, which renders nothing #: Source/Core/VideoBackends/Null/NullBackend.cpp:87 msgid "Null" msgstr "空" #. i18n: The number of times a code block has been executed #: Source/Core/DolphinQt/Debugger/JITWidget.cpp:89 msgid "NumExec" msgstr "执行次数" #. i18n: Refering to emulated wii remote movement. #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Force.cpp:155 msgid "Number of shakes per second." msgstr "每秒摇晃次数。" #: Source/Core/Core/HW/WiimoteEmu/Extension/Nunchuk.cpp:37 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:104 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtensionMotionInput.cpp:31 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtensionMotionSimulation.cpp:27 msgid "Nunchuk" msgstr "双节棍控制器" #: Source/Core/DolphinQt/TAS/WiiTASInputWindow.cpp:185 msgid "Nunchuk Accelerometer" msgstr "双节棍控制器加速度计" #: Source/Core/DolphinQt/TAS/WiiTASInputWindow.cpp:278 msgid "Nunchuk Buttons" msgstr "双节棍按键" #: Source/Core/DolphinQt/TAS/WiiTASInputWindow.cpp:90 msgid "Nunchuk Stick" msgstr "双节棍摇杆" #: Source/Core/DolphinQt/Debugger/AssembleInstructionDialog.cpp:121 #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:640 #: Source/Core/DolphinQt/NKitWarningDialog.cpp:60 #: qtbase/src/gui/kernel/qplatformtheme.cpp:708 msgid "OK" msgstr "确定" #: Source/Core/DolphinQt/FIFO/FIFOAnalyzer.cpp:176 msgid "Object %1" msgstr "对象 %1" #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:92 msgid "Object Range" msgstr "对象范围" #: Source/Core/UICommon/NetPlayIndex.cpp:250 msgid "Oceania" msgstr "大洋洲" #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:157 #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:210 msgid "Off" msgstr "关" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:110 msgid "Offset" msgstr "偏移量" #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:155 msgid "On" msgstr "开" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:188 msgid "On Movement" msgstr "活动时" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:375 msgid "" "On backends that support both using the geometry shader and the vertex " "shader for expanding points and lines, selects the vertex shader for the " "job. May affect performance.

%1" msgstr "" "在同时支持使用几何着色器和顶点着色器来扩展点和线的后端上，为任务选择顶点着色" "器。可能会影响性能。

%1" #: Source/Core/DolphinQt/MenuBar.cpp:601 msgid "Online &Documentation" msgstr "在线文档(&D)" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:50 msgid "Only Show Collection" msgstr "只显示合集" #: Source/Core/DolphinQt/MenuBar.cpp:1670 msgid "" "Only append symbols with prefix:\n" "(Blank for all symbols)" msgstr "" "仅附加有此前缀的符号:\n" "(留空表示全部)" #: Source/Core/DolphinQt/MenuBar.cpp:1645 msgid "" "Only export symbols with prefix:\n" "(Blank for all symbols)" msgstr "" "只导出有前缀的符号：\n" "(对应所有符号的区块)" #: Source/Core/Core/HotkeyManager.cpp:27 #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:364 #: Source/Core/DolphinQt/ToolBar.cpp:115 #: qtbase/src/gui/kernel/qplatformtheme.cpp:714 msgid "Open" msgstr "打开" #: Source/Core/DolphinQt/GameList/GameList.cpp:488 msgid "Open &Containing Folder" msgstr "打开所在目录(&C)" #: Source/Core/DolphinQt/MenuBar.cpp:218 msgid "Open &User Folder" msgstr "打开用户目录(&U)" #: Source/Core/DolphinQt/Config/GraphicsModListWidget.cpp:66 #: Source/Core/DolphinQt/ResourcePackManager.cpp:39 msgid "Open Directory..." msgstr "打开目录..." #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:216 msgid "Open FIFO log" msgstr "打开 FIFO 日志" #: Source/Core/DolphinQt/GameList/GameList.cpp:484 msgid "Open GameCube &Save Folder" msgstr "打开 GameCube 存档目录(&S)" #: Source/Core/DolphinQt/RiivolutionBootWidget.cpp:65 msgid "Open Riivolution XML..." msgstr "打开 Riivolutione XML..." #: Source/Core/DolphinQt/GameList/GameList.cpp:472 msgid "Open Wii &Save Folder" msgstr "打开 Wii 存档目录(&S)" #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:381 msgid "Open dump folder" msgstr "打开转储目录" #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:203 msgid "Open in External Editor" msgstr "在外部编辑器中打开" #: Source/Core/AudioCommon/OpenALStream.cpp:117 msgid "OpenAL: can't create context for device {0}" msgstr "OpenAL: 不能创建设备 {0} 上下文" #: Source/Core/AudioCommon/OpenALStream.cpp:99 msgid "OpenAL: can't find sound devices" msgstr "OpenAL: 不能找到音频设备" #: Source/Core/AudioCommon/OpenALStream.cpp:109 msgid "OpenAL: can't open device {0}" msgstr "OpenAL: 不能打开设备 {0}" #: Source/Core/VideoBackends/OGL/OGLMain.cpp:74 msgid "OpenGL" msgstr "OpenGL" #: Source/Core/VideoBackends/OGL/OGLMain.cpp:72 msgid "OpenGL ES" msgstr "OpenGL ES" #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:279 msgid "Operators" msgstr "运算符" #: Source/Core/Core/HW/GCPadEmu.h:63 #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.cpp:288 #: Source/Core/DolphinQt/Config/Mapping/GCPadEmu.cpp:37 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuGeneral.cpp:70 #: Source/Core/DolphinQt/ConvertDialog.cpp:84 #: Source/Core/DolphinQt/GBAWidget.cpp:430 msgid "Options" msgstr "选项" #: Source/Core/Core/HW/WiimoteEmu/Extension/Drums.cpp:37 #: Source/Core/Core/HW/WiimoteEmu/Extension/Guitar.cpp:53 msgid "Orange" msgstr "橙" #: Source/Core/DolphinQt/Config/FreeLookWidget.cpp:47 msgid "Orbital" msgstr "轨道式" #: Source/Core/Core/FreeLookManager.cpp:101 #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:101 #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:102 #: Source/Core/DolphinQt/Config/Mapping/FreeLookGeneral.cpp:29 #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:228 #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:369 #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:444 msgid "Other" msgstr "其他" #: Source/Core/DolphinQt/Config/FilesystemWidget.cpp:158 msgid "Other Partition (%1)" msgstr "其他分区 (%1)" #: Source/Core/Core/HotkeyManager.cpp:357 #: Source/Core/DolphinQt/Config/Mapping/HotkeyStatesOther.cpp:25 msgid "Other State Hotkeys" msgstr "其他状态热键" #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:460 msgid "Other State Management" msgstr "其他状态管理" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:214 msgid "Other game..." msgstr "其他游戏..." #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:446 msgid "Output" msgstr "输出" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:627 msgid "Output Resampling" msgstr "输出重采样" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:176 msgid "Output Resampling:" msgstr "输出重采样：" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:695 msgid "Overwritten" msgstr "覆盖" #: Source/Core/DolphinQt/MenuBar.cpp:759 msgid "P&lay Input Recording..." msgstr "播放录制...(&L)" #: Source/Core/DiscIO/Enums.cpp:127 Source/Core/DolphinQt/MenuBar.cpp:265 #: Source/Core/DolphinQt/Settings/GeneralPane.cpp:219 msgid "PAL" msgstr "PAL" #: Source/Core/DolphinQt/Config/Graphics/ColorCorrectionConfigWindow.cpp:70 msgid "PAL (EBU)" msgstr "PAL (EBU)" #. i18n: PCAP is a file format #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:425 msgid "PCAP" msgstr "PCAP 格式" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:151 msgid "PNG Compression Level" msgstr "PNG 压缩级别" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:150 msgid "PNG Compression Level:" msgstr "PNG 压缩级别：" #: Source/Core/DolphinQt/Config/InfoWidget.cpp:195 msgid "PNG image file (*.png);; All Files (*)" msgstr "PNG 图像文件 (*.png);; 所有文件 (*)" #: Source/Core/DolphinQt/Debugger/JITWidget.cpp:82 msgid "PPC Size" msgstr "PPC 大小" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:596 msgid "PPC vs Host" msgstr "PPC 对 Host" #: Source/Core/Core/HW/GBAPad.cpp:13 Source/Core/Core/HW/GCPad.cpp:17 msgid "Pad" msgstr "手柄" #: Source/Core/Core/HW/WiimoteEmu/Extension/Drums.cpp:61 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:80 msgid "Pads" msgstr "鼓垫" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:158 msgid "Parameters" msgstr "参数" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:213 msgid "Parse as Hex" msgstr "解析为十六进制" #: Source/Core/DolphinQt/Config/CheatCodeEditor.cpp:149 #: Source/Core/DolphinQt/Config/CheatCodeEditor.cpp:236 msgid "Parsing Error" msgstr "解析错误" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:211 msgid "Passive" msgstr "被动" #: Source/Core/DolphinQt/Config/WiimoteControllersWidget.cpp:106 msgid "Passthrough a Bluetooth adapter" msgstr "直通蓝牙适配器" #: Source/Core/DolphinQt/Achievements/AchievementSettingsWidget.cpp:56 #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:166 msgid "Password" msgstr "密码" #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:165 msgid "Password for joining your game (leave empty for none)" msgstr "加入你游戏需要的密码（留空则无密码）" #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:223 msgid "Password?" msgstr "密码？" #: Source/Core/DolphinQt/Config/NewPatchDialog.cpp:40 msgid "Patch Editor" msgstr "补丁编辑器" #: Source/Core/DolphinQt/Config/NewPatchDialog.cpp:63 msgid "Patch name" msgstr "补丁名称" #: Source/Core/DolphinQt/Config/PropertiesDialog.cpp:70 msgid "Patches" msgstr "补丁" #: Source/Core/DolphinQt/Config/InfoWidget.cpp:52 msgid "Path:" msgstr "路径：" #: Source/Core/DolphinQt/Config/SettingsWindow.cpp:40 #: Source/Core/DolphinQt/Settings/PathPane.cpp:27 msgid "Paths" msgstr "路径" #: Source/Core/DolphinQt/ToolBar.cpp:158 msgid "Pause" msgstr "暂停" #: Source/Core/DolphinQt/MenuBar.cpp:780 msgid "Pause at End of Movie" msgstr "在影片末尾暂停" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:182 msgid "Pause on Focus Loss" msgstr "窗口非活动时暂停" #: Source/Core/DolphinQt/Settings/AdvancedPane.cpp:75 msgid "Pause on Panic" msgstr "宕机时暂停" #: Source/Core/DolphinQt/Settings/AdvancedPane.cpp:77 msgid "" "Pauses the emulation if a Read/Write or Unknown Instruction panic occurs." "
Enabling will affect performance.
The performance impact is the same " "as having Enable MMU on.

If unsure, leave this " "unchecked." msgstr "" "如果发生读/写或未知指令宕机，则暂停模拟。
启用会影响性能。
性能影响与启" "用 MMU 时相同。

如无法确定，请不要选中此项。" #. i18n: Refers to tilting an emulated Wii Remote. #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Tilt.cpp:40 msgid "Peak angular velocity (measured in turns per second)." msgstr "角速度峰值（以每秒转数为单位）。" #. i18n: Refering to emulated wii remote swing movement. #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Force.cpp:55 msgid "Peak velocity of movements to neutral position." msgstr "移动到中间位置的峰值速度。" #. i18n: Refering to emulated wii remote swing movement. #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Force.cpp:46 msgid "Peak velocity of outward swing movements." msgstr "向外挥舞的峰值速度。" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:151 msgid "Per-Pixel Lighting" msgstr "逐像素光照" #: Source/Core/DolphinQt/MenuBar.cpp:285 msgid "Perform Online System Update" msgstr "执行在线系统更新" #: Source/Core/DolphinQt/GameList/GameList.cpp:432 msgid "Perform System Update" msgstr "执行系统更新" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:65 msgid "Performance Sample Window (ms)" msgstr "性能采样窗口(毫秒)：" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:75 msgid "Performance Sample Window (ms):" msgstr "性能采样窗口（毫秒）：" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:53 msgid "Performance Statistics" msgstr "性能统计" #. i18n: One of the options shown below "Address Space". "Physical" is the address space that #. reflects how devices (e.g. RAM) is physically wired up. #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:174 msgid "Physical" msgstr "物理" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:126 msgid "Physical address space" msgstr "物理地址空间" #: Source/Core/UICommon/UICommon.cpp:546 msgid "PiB" msgstr "PiB" #: Source/Core/DolphinQt/MenuBar.cpp:1249 msgid "Pick a debug font" msgstr "选择调试字体" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:635 msgid "Ping" msgstr "延迟" #: Source/Core/InputCommon/ControllerEmu/ControlGroup/IMUGyroscope.cpp:30 msgid "Pitch Down" msgstr "下俯" #: Source/Core/InputCommon/ControllerEmu/ControlGroup/IMUGyroscope.cpp:29 msgid "Pitch Up" msgstr "上仰" #: Source/Core/DolphinQt/GameList/GameList.cpp:1000 #: Source/Core/DolphinQt/MenuBar.cpp:652 msgid "Platform" msgstr "平台" #: Source/Core/DolphinQt/ToolBar.cpp:121 Source/Core/DolphinQt/ToolBar.cpp:165 msgid "Play" msgstr "开始" #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:167 msgid "Play / Record" msgstr "播放/录制" #: Source/Core/Core/HotkeyManager.cpp:56 msgid "Play Recording" msgstr "播放录制" #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:79 msgid "Play Set/Power Disc" msgstr "玩具组合/动力飞盘" #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:122 msgid "Playback Options" msgstr "回放选项" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:635 msgid "Player" msgstr "玩家" #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:81 msgid "Player One" msgstr "玩家 1" #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:83 msgid "Player One Ability One" msgstr "玩家 1 的第 1 项能力" #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:85 msgid "Player One Ability Two" msgstr "玩家 1 的第 2 项能力" #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:87 msgid "Player Two" msgstr "玩家 2" #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:89 msgid "Player Two Ability One" msgstr "玩家 2 的第 1 项能力" #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:91 msgid "Player Two Ability Two" msgstr "玩家 2 的第 2 项能力" #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:224 #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:289 msgid "Players" msgstr "玩家" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:139 msgid "Playtime:" msgstr "游玩时间：" #. i18n: Please leave SyncOnSkipIdle and True untranslated. #. The user needs to enter these terms as-is in an INI file. #: Source/Core/VideoCommon/CommandProcessor.cpp:701 msgid "" "Please change the \"SyncOnSkipIdle\" setting to \"True\"! It's currently " "disabled, which makes this problem very likely to happen." msgstr "" "请将“SyncOnSkipIdle”设置更改为“True”！当前已被禁用，使得很可能发生这个问题。" #: Source/Core/DolphinQt/CheatSearchFactoryWidget.cpp:165 msgid "" "Please start a game before starting a search with standard memory regions." msgstr "在以标准内存区域开始搜索前，请先运行游戏。" #. i18n: "Point" refers to the action of pointing a Wii Remote. #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.cpp:228 #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.cpp:233 msgid "Point" msgstr "指向" #: Source/Core/DolphinQt/Config/GamecubeControllersWidget.cpp:84 #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:67 msgid "Port %1" msgstr "端口 %1" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:219 msgid "Port %1 ROM:" msgstr "端口 %1 ROM:" #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:103 #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:137 msgid "Port:" msgstr "端口 :" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:174 msgid "Portal Slots" msgstr "传送门插槽" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:969 msgid "Possible desync detected: %1 might have desynced at frame %2" msgstr "检测到可能的非同步异常: %1 或许已在帧 %2 处不同步 " #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:633 msgid "Post-Processing Effect" msgstr "后处理效果" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:184 msgid "Post-Processing Effect:" msgstr "后处理效果：" #: Source/Core/DolphinQt/Config/Graphics/PostProcessingConfigWindow.cpp:44 msgid "Post-Processing Shader Configuration" msgstr "后处理着色器配置" #. i18n: VS is short for vertex shaders. #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:165 msgid "Prefer VS for Point/Line Expansion" msgstr "点/线扩展首选顶点着色器" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:104 msgid "Prefetch Custom Textures" msgstr "预读取自定义纹理" #: Source/Core/Core/Movie.cpp:1196 msgid "Premature movie end in PlayController. {0} + {1} > {2}" msgstr "在 PlayController 中提前结束影片。{0} + {1} > {2}" #: Source/Core/Core/Movie.cpp:1314 msgid "Premature movie end in PlayWiimote. {0} + {1} > {2}" msgstr "在 PlayWiimote 中提前结束影片。{0} + {1} > {2}" #: Source/Core/Core/Movie.cpp:1288 msgid "Premature movie end in PlayWiimote. {0} > {1}" msgstr "在PlayWiimote 中提前结束影片。{0} > {1}" #: Source/Core/DolphinQt/WiiUpdate.cpp:97 msgid "" "Preparing to update...\n" "This can take a while." msgstr "" "正在准备更新...\n" "这可能需要一段时间。" #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:89 msgid "Presets" msgstr "预设" #: Source/Core/Core/HotkeyManager.cpp:80 msgid "Press Sync Button" msgstr "按下同步按钮" #: Source/Core/Core/HW/WiimoteEmu/Extension/DrawsomeTablet.cpp:34 #: Source/Core/Core/HW/WiimoteEmu/Extension/UDrawTablet.cpp:52 msgid "Pressure" msgstr "压感" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:287 msgid "" "Prevents shader compilation stuttering by not rendering waiting objects. Can " "work in scenarios where Ubershaders doesn't, at the cost of introducing " "visual glitches and broken effects.

Not " "recommended, only use if the other options give poor results." msgstr "" "通过不渲染等待中的对象来避免着色器编译卡顿。在超着色器不适用的场景下也有效，" "但会导致图像瑕疵并破坏效果。

不推荐，仅在其他选项效" "果不好时使用。" #: Source/Core/Core/HotkeyManager.cpp:92 Source/Core/Core/HotkeyManager.cpp:96 #: Source/Core/Core/HotkeyManager.cpp:100 #: Source/Core/Core/HotkeyManager.cpp:104 msgid "Previous Game Profile" msgstr "上一个游戏预设" #: Source/Core/DolphinQt/FIFO/FIFOAnalyzer.cpp:88 msgid "Previous Match" msgstr "匹配上一个" #: Source/Core/Core/HotkeyManager.cpp:90 Source/Core/Core/HotkeyManager.cpp:94 #: Source/Core/Core/HotkeyManager.cpp:98 Source/Core/Core/HotkeyManager.cpp:102 msgid "Previous Profile" msgstr "上一个预设" #. i18n: In this context, a primitive means a point, line, triangle or rectangle. #. Do not translate the word primitive as if it was an adjective. #: Source/Core/DolphinQt/FIFO/FIFOAnalyzer.cpp:617 msgid "Primitive %1" msgstr "图元 %1" #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:98 msgid "Private" msgstr "私密" #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:97 msgid "Private and Public" msgstr "私密和公开" #: Source/Core/DolphinQt/Config/VerifyWidget.cpp:63 msgid "Problem" msgstr "问题" #: Source/Core/DiscIO/VolumeVerifier.cpp:1448 msgid "" "Problems with high severity were found. The game will most likely not work " "at all." msgstr "发现高严重性问题。游戏很可能根本无法运作。" #: Source/Core/DiscIO/VolumeVerifier.cpp:1437 msgid "" "Problems with low severity were found. They will most likely not prevent the " "game from running." msgstr "发现低严重性问题。这些问题很可能不会影响游戏运行。" #: Source/Core/DiscIO/VolumeVerifier.cpp:1443 msgid "" "Problems with medium severity were found. The whole game or certain parts of " "the game might not work correctly." msgstr "发现中等严重性问题。游戏整体或特定部分可能无法正确运行。" #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:129 msgid "Profile" msgstr "预设" #: Source/Core/Core/HotkeyManager.cpp:339 #: Source/Core/DolphinQt/Config/Mapping/HotkeyDebugging.cpp:24 msgid "Program Counter" msgstr "程序计数器" #: Source/Core/DolphinQt/Achievements/AchievementsWindow.cpp:54 #: Source/Core/DolphinQt/Config/FilesystemWidget.cpp:345 #: Source/Core/DolphinQt/ConvertDialog.cpp:436 #: Source/Core/DolphinQt/Settings/WiiPane.cpp:281 #: Source/Core/DolphinQt/Settings/WiiPane.cpp:306 msgid "Progress" msgstr "进度" #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:99 msgid "Public" msgstr "公开" #: Source/Core/DolphinQt/MenuBar.cpp:533 msgid "Purge Game List Cache" msgstr "清除游戏列表缓存" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:722 msgid "Put IPL ROMs in User/GC/." msgstr "将 IPL ROM 放至 User/GC/。" #: qtbase/src/gui/kernel/qguiapplication.cpp:234 msgctxt "" "Translate this string to the string 'LTR' in left-to-right languages or to " "'RTL' in right-to-left languages (such as Hebrew and Arabic) to get proper " "widget layout." msgid "QT_LAYOUT_DIRECTION" msgstr "LTR" #: Source/Core/Core/NetPlayClient.cpp:1600 msgid "Quality of Service (QoS) couldn't be enabled." msgstr "无法启用服务质量 (QoS)。" #: Source/Core/Core/NetPlayClient.cpp:1596 msgid "Quality of Service (QoS) was successfully enabled." msgstr "已成功启用服务质量 (QoS)。" #: Source/Core/DolphinQt/Settings/AudioPane.cpp:109 msgid "Quality of the DPLII decoder. Audio latency increases with quality." msgstr "DPLII 解码器的质量。质量越高音频延迟越大。" #: Source/Core/Common/MsgHandler.cpp:60 #: Source/Core/DolphinQt/ConvertDialog.cpp:454 #: Source/Core/DolphinQt/GCMemcardManager.cpp:661 #: Source/Core/DolphinQt/MainWindow.cpp:1793 msgid "Question" msgstr "询问" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:134 msgid "Quit" msgstr "退出" #. i18n: The right trigger button (labeled R on real controllers) #: Source/Core/Core/HW/GCPadEmu.h:75 #: Source/Core/Core/HW/WiimoteEmu/Extension/Classic.h:238 #: Source/Core/Core/HW/WiimoteEmu/Extension/Shinkansen.cpp:49 msgid "R" msgstr "R" #. i18n: The right trigger button (labeled R on real controllers) used as an analog input #: Source/Core/Core/HW/GCPadEmu.h:79 #: Source/Core/Core/HW/WiimoteEmu/Extension/Classic.h:242 msgid "R-Analog" msgstr "R-模拟" #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:280 msgid "READY" msgstr "就绪" #: Source/Core/DolphinQt/MenuBar.cpp:996 msgid "RSO Modules" msgstr "RSO 模块" #: Source/Core/DolphinQt/MenuBar.cpp:1312 msgid "RSO auto-detection" msgstr "RSO 自动检测" #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:283 msgid "RUNNING" msgstr "运行" #: Source/Core/DolphinQt/ConvertDialog.cpp:357 msgid "RVZ GC/Wii images (*.rvz)" msgstr "RVZ GC/Wii 镜像 (*.rvz)" #. i18n: A range of memory addresses #: Source/Core/DolphinQt/Debugger/BreakpointDialog.cpp:127 msgid "Range" msgstr "范围" #: Source/Core/DolphinQt/CheatSearchFactoryWidget.cpp:74 msgid "Range End: " msgstr "结束范围：" #: Source/Core/DolphinQt/CheatSearchFactoryWidget.cpp:72 msgid "Range Start: " msgstr "开始范围：" #: Source/Core/DolphinQt/Achievements/AchievementLeaderboardWidget.cpp:95 msgid "Rank %1" msgstr "排名 %1" #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:409 msgid "Raw" msgstr "Raw" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:600 msgid "Re&place instruction" msgstr "替换指令(&P)" #. i18n: This is a selectable condition when adding a breakpoint #: Source/Core/DolphinQt/Debugger/BreakpointDialog.cpp:134 msgid "Read" msgstr "读取" #. i18n: This string is used for a radio button that represents the type of #. memory breakpoint that gets triggered when a read operation or write operation occurs. #. The string is not a command to read and write something or to allow reading and writing. #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:227 msgid "Read and write" msgstr "读取和写入" #. i18n: This string is used for a radio button that represents the type of #. memory breakpoint that gets triggered when a read operation occurs. #. The string does not mean "read-only" in the sense that something cannot be written to. #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:231 msgid "Read only" msgstr "只读" #. i18n: This is a selectable condition when adding a breakpoint #: Source/Core/DolphinQt/Debugger/BreakpointDialog.cpp:138 msgid "Read or Write" msgstr "读取或写入" #: Source/Core/Core/HotkeyManager.cpp:58 msgid "Read-Only Mode" msgstr "只读模式" #: Source/Core/DolphinQt/Config/WiimoteControllersWidget.cpp:114 msgid "Real Balance Board" msgstr "真实平衡板" #: Source/Core/DolphinQt/Config/WiimoteControllersWidget.cpp:143 msgid "Real Wii Remote" msgstr "真实 Wii 遥控器" #: Source/Core/Core/IOS/USB/Bluetooth/BTEmu.cpp:387 msgid "Received invalid Wii Remote data from Netplay." msgstr "从联机中接收到无效的 Wii 遥控器数据。" #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Cursor.cpp:31 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/IMUCursor.cpp:29 msgid "Recenter" msgstr "回到中心" #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:152 msgid "Record" msgstr "录制" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:229 msgid "Record Inputs" msgstr "录制输入" #: Source/Core/DolphinQt/FIFO/FIFOAnalyzer.cpp:147 msgid "Recording" msgstr "正在录制" #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:134 msgid "Recording Options" msgstr "录制选项" #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:321 msgid "Recording..." msgstr "正在录制..." #: Source/Core/Core/HW/WiimoteEmu/Extension/Drums.cpp:34 #: Source/Core/Core/HW/WiimoteEmu/Extension/Guitar.cpp:50 msgid "Red" msgstr "红" #: Source/Core/Core/HW/WiimoteEmu/Extension/Turntable.cpp:42 msgid "Red Left" msgstr "红 左" #: Source/Core/Core/HW/WiimoteEmu/Extension/Turntable.cpp:45 msgid "Red Right" msgstr "红 右" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:502 msgid "" "Reduces the amount of aliasing caused by rasterizing 3D graphics, resulting " "in smoother edges on objects. Increases GPU load and sometimes causes " "graphical issues.

SSAA is significantly more demanding than MSAA, but " "provides top quality geometry anti-aliasing and also applies anti-aliasing " "to lighting, shader effects, and textures.

If " "unsure, select None." msgstr "" "减轻栅格化 3D 图像产生的图形失真。 可使物体边缘变得平滑。会增加 GPU 负载且有" "时导致图形问题。

SSAA 的性能需求明显高于MSAA，但能提供顶级的几何图形抗" "锯齿并且还可将抗锯齿应用于光源、着色器效果与纹理。

" "如无法确定，选择“无”。" #: Source/Core/DolphinQt/Config/VerifyWidget.cpp:87 msgid "Redump.org Status:" msgstr "Redump.org 状态：" #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:202 #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:80 #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:107 #: Source/Core/DolphinQt/Config/WiimoteControllersWidget.cpp:109 #: Source/Core/DolphinQt/Debugger/JITWidget.cpp:99 #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:89 #: Source/Core/DolphinQt/ResourcePackManager.cpp:42 #: Source/Core/DolphinQt/ToolBar.cpp:116 msgid "Refresh" msgstr "刷新" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:224 msgid "Refresh Current Values" msgstr "刷新当前值" #: Source/Core/Core/HotkeyManager.cpp:30 msgid "Refresh Game List" msgstr "刷新游戏列表" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:398 msgid "Refresh failed. Please run the game for a bit and try again." msgstr "刷新失败。请运行一会儿游戏，然后重试。" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:412 msgid "Refreshed current values." msgstr "已刷新当前值。" #: Source/Core/DolphinQt/GameList/GameList.cpp:280 #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:198 msgid "Refreshing..." msgstr "正在刷新..." #: Source/Core/DolphinQt/GameList/GameList.cpp:1008 #: Source/Core/DolphinQt/MenuBar.cpp:660 #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:223 msgid "Region" msgstr "地区" #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:107 msgid "Region:" msgstr "地区:" #: Source/Core/DolphinQt/Debugger/RegisterWidget.cpp:27 msgid "Registers" msgstr "寄存器" #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Cursor.cpp:62 msgid "Relative Input" msgstr "相对输入" #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Cursor.cpp:33 msgid "Relative Input Hold" msgstr "保持相对输入" #: Source/Core/DolphinQt/Updater.cpp:85 msgid "Remind Me Later" msgstr "以后提醒我" #: Source/Core/DolphinQt/Config/ControllerInterface/DualShockUDPClientWidget.cpp:40 #: Source/Core/DolphinQt/Config/NewPatchDialog.cpp:129 #: Source/Core/DolphinQt/ResourcePackManager.cpp:41 #: Source/Core/DolphinQt/Settings/PathPane.cpp:142 #: Source/Core/DolphinQt/Settings/WiiPane.cpp:328 msgid "Remove" msgstr "移除" #: Source/Core/DolphinQt/GCMemcardManager.cpp:669 #: Source/Core/DolphinQt/GCMemcardManager.cpp:676 msgid "Remove Failed" msgstr "移除失败" #: Source/Core/DolphinQt/ConvertDialog.cpp:76 msgid "Remove Junk Data (Irreversible):" msgstr "移除垃圾数据(不可逆)：" #: Source/Core/DolphinQt/GameList/GameList.cpp:523 msgid "Remove Tag..." msgstr "移除标签..." #: Source/Core/DolphinQt/GameList/GameList.cpp:1135 msgid "Remove tag" msgstr "移除标签" #: Source/Core/DolphinQt/ConvertDialog.cpp:303 msgid "" "Removing junk data does not save any space when converting to ISO (unless " "you package the ISO file in a compressed file format such as ZIP " "afterwards). Do you want to continue anyway?" msgstr "" "转换为 ISO 格式时，移除垃圾数据不会节省任何空间（除非以后将 ISO 文件打包为压" "缩文件格式，例如 ZIP 文件）。是否仍要继续？" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:925 #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:960 msgid "Rename symbol" msgstr "重命名符号" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:172 msgid "Render Window" msgstr "渲染窗口" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:108 msgid "Render to Main Window" msgstr "渲染到主窗口" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:292 msgid "" "Renders the scene as a wireframe.

If unsure, leave " "this unchecked." msgstr "" "将场景以线框样式渲染。

如无法确定，请不要选中此项。" "" #: Source/Core/Core/HW/GCMemcard/GCMemcardDirectory.cpp:408 msgid "Report: GCIFolder Writing to unallocated block {0:#x}" msgstr "报告: GCIFolder 正在写入未分配的区块 {0:#x}" #: Source/Core/DolphinQt/DiscordJoinRequestDialog.cpp:23 msgid "Request to Join Your Party" msgstr "请求加入你的派对" #: Source/Core/Core/FreeLookManager.cpp:99 #: Source/Core/Core/HotkeyManager.cpp:33 Source/Core/Core/HotkeyManager.cpp:187 #: Source/Core/DolphinQt/Config/Mapping/MappingIndicator.cpp:899 #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:153 #: Source/Core/DolphinQt/Config/WiimoteControllersWidget.cpp:108 #: qtbase/src/gui/kernel/qplatformtheme.cpp:740 msgid "Reset" msgstr "重置" #: Source/Core/DolphinQt/Config/Mapping/MappingWidget.cpp:239 #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:108 msgid "Reset All" msgstr "全部重置" #: Source/Core/DolphinQt/MenuBar.cpp:575 msgid "Reset Ignore Panic Handler" msgstr "重置忽略警告程序" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:226 msgid "Reset Results" msgstr "重置结果" #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:391 msgid "Reset Traversal Server" msgstr "重置穿透服务器" #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:392 msgid "Reset Traversal Server to %1:%2" msgstr "重置穿透服务器到 %1:%2" #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:91 msgid "Reset Traversal Settings" msgstr "重置穿透设置" #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:333 msgid "Reset Values" msgstr "重置值" #: Source/Core/Core/FreeLookManager.cpp:103 msgid "Reset View" msgstr "重置视图" #: Source/Core/DolphinQt/Config/WiimoteControllersWidget.cpp:111 msgid "Reset all saved Wii Remote pairings" msgstr "重置所有保存的 Wii 遥控器配对" #: Source/Core/DolphinQt/ResourcePackManager.cpp:26 msgid "Resource Pack Manager" msgstr "资源包管理器" #: Source/Core/DolphinQt/Settings/PathPane.cpp:222 msgid "Resource Pack Path:" msgstr "资源包路径:" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:341 msgid "Restart Required" msgstr "需要重启" #: qtbase/src/gui/kernel/qplatformtheme.cpp:742 msgid "Restore Defaults" msgstr "恢复默认值" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:604 msgid "Restore instruction" msgstr "恢复指令" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:741 #: qtbase/src/gui/kernel/qplatformtheme.cpp:726 msgid "Retry" msgstr "重试" #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Force.cpp:51 msgid "Return Speed" msgstr "返回速度" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:635 msgid "Revision" msgstr "修订版" #: Source/Core/DolphinQt/AboutDialog.cpp:55 msgid "Revision: %1" msgstr "修订版: %1" #: Source/Core/Core/FreeLookManager.cpp:91 #: Source/Core/Core/HW/WiimoteEmu/Extension/Shinkansen.cpp:37 #: Source/Core/Core/HW/WiimoteEmu/Extension/TaTaCon.cpp:36 #: Source/Core/DolphinQt/TAS/GCTASInputWindow.cpp:45 #: Source/Core/DolphinQt/TAS/WiiTASInputWindow.cpp:217 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Force.cpp:23 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/IMUAccelerometer.cpp:21 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Slider.cpp:22 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Tilt.cpp:23 #: Source/Core/InputCommon/ControllerEmu/ControllerEmu.h:27 msgid "Right" msgstr "右" #: Source/Core/Core/HW/WiimoteEmu/Extension/Classic.h:221 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:59 #: Source/Core/DolphinQt/TAS/WiiTASInputWindow.cpp:98 msgid "Right Stick" msgstr "右摇杆" #. i18n: "Table" refers to a turntable #: Source/Core/Core/HW/WiimoteEmu/Extension/Turntable.cpp:71 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:171 msgid "Right Table" msgstr "右碟片" #: Source/Core/DolphinQt/RiivolutionBootWidget.cpp:139 msgid "Riivolution XML files" msgstr "Riivolution XML 文件" #. i18n: Refers to the "rim" of a TaTaCon drum. #: Source/Core/Core/HW/WiimoteEmu/Extension/TaTaCon.cpp:50 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:224 msgid "Rim" msgstr "边缘" #: Source/Core/Core/HW/WiimoteEmu/Extension/UDrawTablet.cpp:32 msgid "Rocker Down" msgstr "下" #: Source/Core/Core/HW/WiimoteEmu/Extension/UDrawTablet.cpp:31 msgid "Rocker Up" msgstr "上" #: Source/Core/InputCommon/ControllerEmu/ControlGroup/IMUGyroscope.cpp:31 msgid "Roll Left" msgstr "左倾" #: Source/Core/InputCommon/ControllerEmu/ControlGroup/IMUGyroscope.cpp:32 msgid "Roll Right" msgstr "右倾" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:521 msgid "Room ID" msgstr "房间 ID" #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:469 msgid "Rotation" msgstr "旋转" #. i18n: Refering to emulated wii remote swing movement. #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Force.cpp:63 msgid "Rotation applied at extremities of swing." msgstr "挥舞到极限时的旋转角度。" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:287 msgid "" "Rounds 2D vertices to whole pixels and rounds the viewport size to a whole " "number.

Fixes graphical problems in some games at higher internal " "resolutions. This setting has no effect when native internal resolution is " "used.

If unsure, leave this unchecked." msgstr "" "将 2D 顶点舍入为整数像素并将视口大小舍入为整数。

修正部分游戏在较高内" "部分辨率下的图像问题。该选项在使用原生内部分辨率时没有效果。" "

如无法确定，请不要选中此项。" #: Source/Core/Core/HW/GCPadEmu.h:61 #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.cpp:284 #: Source/Core/DolphinQt/Config/Mapping/GCPadEmu.cpp:35 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuGeneral.cpp:65 msgid "Rumble" msgstr "震动" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:593 msgid "Run &To Here" msgstr "运行到此处(&T)" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:204 msgid "Run GBA Cores in Dedicated Threads" msgstr "在独占线程中运行 GBA 内核" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:675 msgid "Run until" msgstr "运行直到" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:629 msgid "Run until (ignoring breakpoints)" msgstr "运行直到（忽略断点）" #: Source/Core/DolphinQt/Debugger/RegisterWidget.cpp:178 msgid "Run until hit (ignoring breakpoints)" msgstr "运行直到命中（忽略断点）" #: Source/Core/DiscIO/Enums.cpp:51 msgid "Russia" msgstr "俄罗斯" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:223 msgid "SD Card" msgstr "SD 卡" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:263 msgid "SD Card File Size:" msgstr "SD 卡文件大小：" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:506 msgid "SD Card Image (*.raw);;All Files (*)" msgstr "SD 卡镜像 (*.raw);;所有文件 (*)" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:230 msgid "SD Card Path:" msgstr "SD 卡路径:" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:210 msgid "SD Card Settings" msgstr "SD 卡设置" #: Source/Core/DolphinQt/RiivolutionBootWidget.cpp:186 msgid "SD Root:" msgstr "SD 根目录：" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:252 msgid "SD Sync Folder:" msgstr "SD 同步文件夹：" #: Source/Core/DolphinQt/Config/Graphics/ColorCorrectionConfigWindow.cpp:97 msgid "SDR Display Gamma Target" msgstr "SDR 显示目标伽玛值" #: Source/Core/Core/HW/GBAPadEmu.h:45 #: Source/Core/Core/HW/WiimoteEmu/Extension/Shinkansen.cpp:42 msgid "SELECT" msgstr "选择" #: Source/Core/DolphinQt/Config/VerifyWidget.cpp:76 msgid "SHA-1:" msgstr "SHA-1:" #: Source/Core/DolphinQt/NetPlay/GameDigestDialog.cpp:43 msgid "SHA1 Digest" msgstr "SHA1 摘要" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:192 msgid "SP1:" msgstr "SP1:" #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:347 msgid "SSL context" msgstr "SSL 上下文" #. i18n: The START/PAUSE button on GameCube controllers #: Source/Core/Core/HW/GBAPadEmu.h:46 Source/Core/Core/HW/GCPadEmu.cpp:51 #: Source/Core/Core/HW/WiimoteEmu/Extension/Shinkansen.cpp:43 msgid "START" msgstr "START" #: Source/Core/DolphinQt/MenuBar.cpp:1008 msgid "Sa&ve Code" msgstr "保存代码(&V)" #: Source/Core/DolphinQt/MenuBar.cpp:365 msgid "Sa&ve State" msgstr "保存状态(&V)" #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:224 #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:75 msgid "Safe" msgstr "安全" #: Source/Core/DolphinQt/Config/Mapping/HotkeyStates.cpp:21 #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:132 #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:371 #: Source/Core/DolphinQt/Debugger/BreakpointWidget.cpp:116 #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:102 #: Source/Core/DolphinQt/Debugger/WatchWidget.cpp:105 #: qtbase/src/gui/kernel/qplatformtheme.cpp:710 msgid "Save" msgstr "保存" #: qtbase/src/gui/kernel/qplatformtheme.cpp:712 msgid "Save All" msgstr "保存全部" #: Source/Core/DolphinQt/GameList/GameList.cpp:588 #: Source/Core/DolphinQt/GameList/GameList.cpp:593 #: Source/Core/DolphinQt/MenuBar.cpp:1144 msgid "Save Export" msgstr "存档导出" #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:227 msgid "Save FIFO log" msgstr "保存 FIFO 日志" #: Source/Core/DolphinQt/Config/FilesystemWidget.cpp:302 #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:775 msgid "Save File to" msgstr "保存文件到" #. i18n: Noun (i.e. the data saved by the game) #: Source/Core/DolphinQt/GBAWidget.cpp:410 msgid "Save Game" msgstr "游戏存档" #: Source/Core/DolphinQt/GBAWidget.cpp:246 msgid "Save Game Files (*.sav);;All Files (*)" msgstr "游戏存档文件 (*.sav);;所有文件 (*)" #: Source/Core/DolphinQt/MenuBar.cpp:1102 #: Source/Core/DolphinQt/MenuBar.cpp:1111 #: Source/Core/DolphinQt/MenuBar.cpp:1114 #: Source/Core/DolphinQt/MenuBar.cpp:1120 #: Source/Core/DolphinQt/MenuBar.cpp:1127 msgid "Save Import" msgstr "存档导入" #: Source/Core/Core/HotkeyManager.cpp:177 msgid "Save Oldest State" msgstr "保存到最早状态存档" #: Source/Core/DolphinQt/RiivolutionBootWidget.cpp:342 msgid "Save Preset" msgstr "保存预设" #: Source/Core/DolphinQt/MainWindow.cpp:1928 msgid "Save Recording File As" msgstr "录制文件另存为" #: Source/Core/Core/HotkeyManager.cpp:180 #: Source/Core/Core/HotkeyManager.cpp:354 #: Source/Core/DolphinQt/GBAWidget.cpp:418 msgid "Save State" msgstr "保存状态" #: Source/Core/Core/HotkeyManager.cpp:143 msgid "Save State Slot 1" msgstr "保存状态 1" #: Source/Core/Core/HotkeyManager.cpp:152 msgid "Save State Slot 10" msgstr "保存状态 10" #: Source/Core/Core/HotkeyManager.cpp:144 msgid "Save State Slot 2" msgstr "保存状态 2" #: Source/Core/Core/HotkeyManager.cpp:145 msgid "Save State Slot 3" msgstr "保存状态 3" #: Source/Core/Core/HotkeyManager.cpp:146 msgid "Save State Slot 4" msgstr "保存状态 4" #: Source/Core/Core/HotkeyManager.cpp:147 msgid "Save State Slot 5" msgstr "保存状态 5" #: Source/Core/Core/HotkeyManager.cpp:148 msgid "Save State Slot 6" msgstr "保存状态 6" #: Source/Core/Core/HotkeyManager.cpp:149 msgid "Save State Slot 7" msgstr "保存状态 7" #: Source/Core/Core/HotkeyManager.cpp:150 msgid "Save State Slot 8" msgstr "保存状态 8" #: Source/Core/Core/HotkeyManager.cpp:151 msgid "Save State Slot 9" msgstr "保存状态 9" #: Source/Core/DolphinQt/MenuBar.cpp:366 msgid "Save State to File" msgstr "保存状态到文件" #: Source/Core/DolphinQt/MenuBar.cpp:368 msgid "Save State to Oldest Slot" msgstr "保存状态到最早的插槽" #: Source/Core/DolphinQt/MenuBar.cpp:367 msgid "Save State to Selected Slot" msgstr "向选中的插槽保存状态" #: Source/Core/DolphinQt/MenuBar.cpp:369 msgid "Save State to Slot" msgstr "保存状态到插槽" #: Source/Core/DolphinQt/MenuBar.cpp:1005 msgid "Save Symbol Map &As..." msgstr "保存符号映射为...(&A)" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:112 msgid "Save Texture Cache to State" msgstr "保存纹理缓存到状态" #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:459 msgid "Save and Load State" msgstr "保存和载入状态" #: Source/Core/DolphinQt/RiivolutionBootWidget.cpp:68 msgid "Save as Preset..." msgstr "另存为预设..." #: Source/Core/DolphinQt/Config/InfoWidget.cpp:183 msgid "Save as..." msgstr "另存为..." #: Source/Core/DolphinQt/MenuBar.cpp:1728 msgid "Save combined output file as" msgstr "将组合输出文件另存为" #: Source/Core/DolphinQt/MenuBar.cpp:1103 msgid "" "Save data for this title already exists in the NAND. Consider backing up the " "current data before overwriting.\n" "Overwrite now?" msgstr "" "此游戏的存档数据已存在于 NAND 中。 建议在覆盖之前备份当前数据。\n" "是否现在覆盖？ " #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:225 msgid "Save in Same Directory as the ROM" msgstr "保存在与 ROM 相同的目录中" #: Source/Core/DolphinQt/MenuBar.cpp:1588 msgid "Save map file" msgstr "保存映射文件" #: Source/Core/DolphinQt/MenuBar.cpp:1648 msgid "Save signature file" msgstr "保存签名文件" #: Source/Core/Core/HotkeyManager.cpp:153 msgid "Save to Selected Slot" msgstr "保存至所选插槽" #: Source/Core/DolphinQt/MenuBar.cpp:407 msgid "Save to Slot %1 - %2" msgstr "保存到插槽 %1 - %2" #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:151 msgid "Save..." msgstr "保存..." #: Source/Core/DolphinQt/Config/WiimoteControllersWidget.cpp:218 msgid "Saved Wii Remote pairings can only be reset when a Wii game is running." msgstr "只有在 Wii 游戏运行时保存的 Wii 遥控器配对才能重置。" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:231 msgid "Saves:" msgstr "存档：" #: Source/Core/Core/Movie.cpp:1024 msgid "Savestate movie {0} is corrupted, movie recording stopping..." msgstr "即时存档影片 {0} 被破坏，影片录制停止……" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:149 msgid "Scaled EFB Copy" msgstr "缩放 EFB 副本" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:312 msgid "Scan succeeded." msgstr "扫描成功。" #: Source/Core/DolphinQt/ToolBar.cpp:125 msgid "ScrShot" msgstr "截图" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:148 #: Source/Core/DolphinQt/FIFO/FIFOAnalyzer.cpp:86 #: Source/Core/DolphinQt/MenuBar.cpp:541 Source/Core/DolphinQt/MenuBar.cpp:543 msgid "Search" msgstr "搜索" #: Source/Core/DolphinQt/Debugger/CodeWidget.cpp:111 #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:109 msgid "Search Address" msgstr "搜索地址" #: Source/Core/DolphinQt/FIFO/FIFOAnalyzer.cpp:84 msgid "Search Current Object" msgstr "搜索当前对象" #: Source/Core/DolphinQt/Settings/PathPane.cpp:146 msgid "Search Subfolders" msgstr "搜索子目录" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:222 msgid "Search and Filter" msgstr "搜索与过滤" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:376 msgid "" "Search currently not possible in virtual address space. Please run the game " "for a bit and try again." msgstr "当前无法在虚拟地址空间中进行搜索。请运行一会儿游戏，然后重试。" #: Source/Core/DolphinQt/MenuBar.cpp:891 msgid "Search for an Instruction" msgstr "搜索一个指令" #: Source/Core/DolphinQt/SearchBar.cpp:29 msgid "Search games..." msgstr "搜索游戏..." #: Source/Core/DolphinQt/MenuBar.cpp:1768 msgid "Search instruction" msgstr "搜索指令" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:247 msgid "Search:" msgstr "搜索：" #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:59 msgid "Section that contains all Action Replay cheat codes." msgstr "包含所有 Action Replay 金手指的部分。" #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:56 msgid "Section that contains all Gecko cheat codes." msgstr "包含所有 Gecko 金手指的部分。" #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:62 msgid "Section that contains all graphics related settings." msgstr "包含所有图像相关设置的部分。" #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:34 msgid "Section that contains most CPU and Hardware related settings." msgstr "包含大部分 CPU 与硬件相关设置的部分。" #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:408 msgid "Security options" msgstr "安全选项" #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:261 msgid "Select" msgstr "选择" #: Source/Core/DolphinQt/Settings/PathPane.cpp:71 msgid "Select Dump Path" msgstr "选择转储路径" #: Source/Core/DolphinQt/GameList/GameList.cpp:568 #: Source/Core/DolphinQt/MenuBar.cpp:1138 msgid "Select Export Directory" msgstr "选择导出目录" #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:138 msgid "Select Figure File" msgstr "选择角色文件" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:663 msgid "Select GBA BIOS" msgstr "选择 GBA BIOS" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:811 msgid "Select GBA ROM" msgstr "选择 GBA ROM" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:692 msgid "Select GBA Saves Path" msgstr "选择 GBA 存档路径" #: Source/Core/DolphinQt/Config/Mapping/HotkeyStatesOther.cpp:21 msgid "Select Last State" msgstr "选择最近状态" #: Source/Core/DolphinQt/Settings/PathPane.cpp:82 msgid "Select Load Path" msgstr "选择加载路径" #: Source/Core/DolphinQt/Settings/PathPane.cpp:93 msgid "Select Resource Pack Path" msgstr "选择资源包路径" #: Source/Core/DolphinQt/RiivolutionBootWidget.cpp:138 msgid "Select Riivolution XML file" msgstr "选择 Riivolutione XML 文件" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:497 msgid "Select Skylander Collection" msgstr "选择 Skylander 合集" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:568 msgid "Select Skylander File" msgstr "选择 Skylander 文件" #: Source/Core/DolphinQt/MenuBar.cpp:408 msgid "Select Slot %1 - %2" msgstr "选择插槽 %1 - %2" #: Source/Core/Core/HotkeyManager.cpp:355 msgid "Select State" msgstr "选择状态" #: Source/Core/DolphinQt/MenuBar.cpp:382 msgid "Select State Slot" msgstr "选择状态插槽" #: Source/Core/Core/HotkeyManager.cpp:155 msgid "Select State Slot 1" msgstr "选择状态 1" #: Source/Core/Core/HotkeyManager.cpp:164 msgid "Select State Slot 10" msgstr "选择状态 10" #: Source/Core/Core/HotkeyManager.cpp:156 msgid "Select State Slot 2" msgstr "选择状态 2" #: Source/Core/Core/HotkeyManager.cpp:157 msgid "Select State Slot 3" msgstr "选择状态 3" #: Source/Core/Core/HotkeyManager.cpp:158 msgid "Select State Slot 4" msgstr "选择状态 4" #: Source/Core/Core/HotkeyManager.cpp:159 msgid "Select State Slot 5" msgstr "选择状态 5" #: Source/Core/Core/HotkeyManager.cpp:160 msgid "Select State Slot 6" msgstr "选择状态 6" #: Source/Core/Core/HotkeyManager.cpp:161 msgid "Select State Slot 7" msgstr "选择状态 7" #: Source/Core/Core/HotkeyManager.cpp:162 msgid "Select State Slot 8" msgstr "选择状态 8" #: Source/Core/Core/HotkeyManager.cpp:163 msgid "Select State Slot 9" msgstr "选择状态 9" #: Source/Core/DolphinQt/Settings/PathPane.cpp:105 msgid "Select WFS Path" msgstr "选择 WFS 路径" #: Source/Core/DolphinQt/Settings/PathPane.cpp:60 msgid "Select Wii NAND Root" msgstr "选择 Wii NAND 根目录" #: Source/Core/DolphinQt/GameList/GameList.cpp:293 #: Source/Core/DolphinQt/Settings/PathPane.cpp:39 msgid "Select a Directory" msgstr "选择目录" #: Source/Core/DolphinQt/Config/InfoWidget.cpp:194 #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:583 #: Source/Core/DolphinQt/GBAWidget.cpp:214 #: Source/Core/DolphinQt/GBAWidget.cpp:245 #: Source/Core/DolphinQt/MainWindow.cpp:776 #: Source/Core/DolphinQt/MainWindow.cpp:1408 #: Source/Core/DolphinQt/MainWindow.cpp:1417 msgid "Select a File" msgstr "选择文件" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:521 msgid "Select a Folder to sync with the SD Card Image" msgstr "选择要与 SD 卡镜像同步的文件夹" #: Source/Core/DolphinQt/Settings/PathPane.cpp:47 msgid "Select a Game" msgstr "选择游戏" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:504 msgid "Select a SD Card Image" msgstr "选择 SD 卡镜像" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:693 msgid "Select a file" msgstr "选择文件" #: Source/Core/DolphinQt/NetPlay/GameListDialog.cpp:18 msgid "Select a game" msgstr "选择游戏" #: Source/Core/DolphinQt/MenuBar.cpp:1073 msgid "Select a title to install to NAND" msgstr "选择要安装到 NAND 的软件" #: Source/Core/DolphinQt/GBAWidget.cpp:192 msgid "Select e-Reader Cards" msgstr "选择 e-Reader 卡" #: Source/Core/DolphinQt/MenuBar.cpp:1376 msgid "Select the RSO module address:" msgstr "选择 RSO 模块地址:" #: Source/Core/DolphinQt/MainWindow.cpp:1852 msgid "Select the Recording File to Play" msgstr "选择要播放的录制文件" #: Source/Core/DolphinQt/RiivolutionBootWidget.cpp:192 msgid "Select the Virtual SD Card Root" msgstr "选择虚拟 SD 卡根目录" #: Source/Core/DolphinQt/MainWindow.cpp:1829 msgid "Select the keys file (OTP/SEEPROM dump)" msgstr "选择密钥文件 (OTP/SEEPROM 转储)" #: Source/Core/DolphinQt/MainWindow.cpp:1803 #: Source/Core/DolphinQt/MenuBar.cpp:1093 msgid "Select the save file" msgstr "选择一个存档文件" #: Source/Core/DolphinQt/ConvertDialog.cpp:379 msgid "Select where you want to save the converted image" msgstr "选择要保存转换镜像的位置" #: Source/Core/DolphinQt/ConvertDialog.cpp:370 msgid "Select where you want to save the converted images" msgstr "选择要保存多个转换镜像的位置" #: Source/Core/DolphinQt/Config/LogWidget.cpp:138 msgid "Selected Font" msgstr "所选字体" #: Source/Core/Core/ConfigLoaders/GameConfigLoader.cpp:233 msgid "Selected controller profile does not exist" msgstr "所选控制器预设不存在" #: Source/Core/Core/NetPlayServer.cpp:1341 #: Source/Core/Core/NetPlayServer.cpp:1715 #: Source/Core/Core/NetPlayServer.cpp:2043 #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:488 #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:890 msgid "Selected game doesn't exist in game list!" msgstr "所选游戏在游戏列表中不存在！" #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:228 msgid "Selected thread callstack" msgstr "选定的线程调用栈" #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:206 msgid "Selected thread context" msgstr "选定的线程上下文" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:355 msgid "" "Selects a hardware adapter to use.

%1 doesn't " "support this feature." msgstr "" "选择要使用的硬件适配器。

%1 不支持此功能。" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:352 msgid "" "Selects a hardware adapter to use.

If unsure, " "select the first one." msgstr "" "选择要使用的硬件适配器。

如无法确定，请选择第一个。" "" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:575 msgid "" "Selects the stereoscopic 3D mode. Stereoscopy allows a better feeling of " "depth if the necessary hardware is present. Heavily decreases emulation " "speed and sometimes causes issues.

Side-by-Side and Top-and-Bottom " "are used by most 3D TVs.
Anaglyph is used for Red-Cyan colored glasses." "
HDMI 3D is used when the monitor supports 3D display resolutions." "
Passive is another type of 3D used by some TVs." "

If unsure, select Off." msgstr "" "选择立体 3D 显示模式。如果硬件支持，开启此功能可产生更强的立体感。严重降低模" "拟速度，有时会造成问题。

多数 3D 电视采用左右或上下模式。
色差模式" "配合红青眼镜使用。
显示器支持 3D 显示分辨率时可使用 HDMI 3D 模式。
还有" "一部分电视采用被动模式。

如无法确定，请选择“关”。" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:251 msgid "" "Selects which aspect ratio to use when rendering.
Each game can have a " "slightly different native aspect ratio.

Auto: Uses the native aspect " "ratio
Force 16:9: Mimics an analog TV with a widescreen aspect ratio." "
Force 4:3: Mimics a standard 4:3 analog TV.
Stretch to Window: " "Stretches the picture to the window size.
Custom: For games running with " "specific custom aspect ratio cheats.

If unsure, " "select Auto." msgstr "" "选择渲染时使用哪种长宽比。
每个游戏的原生长宽比可能略有不同。
“自动”：" "使用原生长宽比。
“强制 16:9”：模仿一个宽屏长宽比的模拟电视。
“强制 " "4:3”：模仿一个标准的 4:3 模拟电视。
“拉伸到窗口”：将图像拉伸至窗口大小。" "
“自定义”：对应使用特定长宽比金手指运行的游戏

如" "无法确定，请选择“自动”。" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:233 msgid "" "Selects which graphics API to use internally.

The software renderer " "is extremely slow and only useful for debugging, so any of the other " "backends are recommended. Different games and different GPUs will behave " "differently on each backend, so for the best emulation experience it is " "recommended to try each and select the backend that is least problematic." "

If unsure, select OpenGL." msgstr "" "选择在内部使用的图形接口。

软件渲染器非常慢，仅用于调试，所以推荐其他" "任一后端。各后端具体表现因游戏与 GPU 而异，因此建议逐个尝试一下并选择问题最少" "的一个以达到最好的模拟效果。

如无法确定，请选" "择“OpenGL”。" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:269 msgid "Send" msgstr "发送" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:354 msgid "Sensor Bar Position:" msgstr "感应条位置：" #: Source/Core/DiscIO/VolumeVerifier.cpp:315 msgid "" "Serial and/or version data is missing from {0}\n" "Please append \"{1}\" (without the quotes) to the datfile URL when " "downloading\n" "Example: {2}" msgstr "" "{0} 缺少序列号和/或版本数据\n" "下载时请在 dat 文件网址后附加 “{0}”（不带引号）\n" "例如：{2}" #: Source/Core/DolphinQt/Config/ControllerInterface/DualShockUDPClientAddServerDialog.cpp:50 msgid "Server IP Address" msgstr "服务器 IP 地址" #: Source/Core/DolphinQt/Config/ControllerInterface/DualShockUDPClientAddServerDialog.cpp:52 msgid "Server Port" msgstr "服务器端口" #: Source/Core/Core/NetPlayClient.cpp:1981 msgid "Server rejected traversal attempt" msgstr "穿透尝试被服务器拒绝" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:121 msgid "Set &Value" msgstr "设置值(&V)" #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:581 msgid "Set &blr" msgstr "设置 blr (&B)" #. i18n: Here, PC is an acronym for program counter, not personal computer. #: Source/Core/Core/HotkeyManager.cpp:74 Source/Core/DolphinQt/ToolBar.cpp:113 msgid "Set PC" msgstr "设置 PC" #: Source/Core/DolphinQt/GameList/GameList.cpp:416 msgid "Set as &Default ISO" msgstr "设置为默认镜像(&D)" #: Source/Core/DolphinQt/GCMemcardManager.cpp:359 msgid "Set memory card file for Slot A" msgstr "给插槽 A 设置存储卡文件" #: Source/Core/DolphinQt/GCMemcardManager.cpp:360 msgid "Set memory card file for Slot B" msgstr "给插槽 B 设置存储卡文件" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:590 msgid "Set symbol &end address" msgstr "设置符号终止地址(&E)" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:588 msgid "Set symbol &size" msgstr "设置符号大小(&S)" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:985 msgid "Set symbol end address" msgstr "设置符号终止地址" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:961 msgid "Set symbol size (%1):" msgstr "设置符号大小 (%1):" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:186 msgid "" "Sets the Wii display mode to 60Hz (480i) instead of 50Hz (576i) for PAL " "games.\n" "May not work for all games." msgstr "" "将 PAL 制式 Wii 游戏的显示模式由 50Hz (576i) 改为 60Hz (480i)。\n" "可能并不适用于所有游戏。" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:193 msgid "Sets the Wii system language." msgstr "设置 Wii 的系统语言。" #: Source/Core/DolphinQt/Settings/AudioPane.cpp:92 msgid "" "Sets the latency in milliseconds. Higher values may reduce audio crackling. " "Certain backends only." msgstr "以毫秒为单位设置延迟。较高的值可能会减少音频噪声。仅限某些后端。" #: Source/Core/DolphinQt/CheatSearchFactoryWidget.cpp:53 msgid "" "Sets up the search using standard MEM1 and (on Wii) MEM2 mappings in virtual " "address space. This will work for the vast majority of games." msgstr "" "设置搜索在虚拟地址空间中使用标准内存 1 和（在 Wii 上）内存 2 映射。这将适用于" "绝大多数游戏。" #: Source/Core/DolphinQt/Achievements/AchievementsWindow.cpp:53 #: Source/Core/DolphinQt/Config/SettingsWindow.cpp:27 #: Source/Core/DolphinQt/TAS/TASInputWindow.cpp:70 msgid "Settings" msgstr "设置" #: Source/Core/Core/Boot/Boot_BS2Emu.cpp:432 msgid "SetupWiiMemory: Can't create setting.txt file" msgstr "SetupWiiMemory: 无法创建 setting.txt 文件" #: Source/Core/DolphinQt/Config/VerifyWidget.cpp:63 msgid "Severity" msgstr "严重性" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:119 msgid "Shader Compilation" msgstr "着色器编译" #: Source/Core/Core/HW/WiimoteEmu/Extension/Nunchuk.cpp:52 #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.cpp:229 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtensionMotionSimulation.cpp:29 msgid "Shake" msgstr "摇晃" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:140 msgid "Sharp Bilinear" msgstr "锐利双线性" #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:232 msgid "Shinkansen" msgstr "新干线" #: Source/Core/Core/HW/WiimoteEmu/Extension/Shinkansen.cpp:23 msgid "Shinkansen Controller" msgstr "新干线控制器" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:62 #, c-format msgid "Show % Speed" msgstr "显示百分比速度" #: Source/Core/DolphinQt/MenuBar.cpp:415 msgid "Show &Log" msgstr "显示日志(&L)" #: Source/Core/DolphinQt/MenuBar.cpp:428 msgid "Show &Toolbar" msgstr "显示工具栏(&T)" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:181 msgid "Show Active Title in Window Title" msgstr "在标题栏显示当前游戏名" #: Source/Core/DolphinQt/MenuBar.cpp:728 msgid "Show All" msgstr "显示全部" #: Source/Core/DolphinQt/MenuBar.cpp:715 msgid "Show Australia" msgstr "显示澳大利亚" #: Source/Core/DolphinQt/Settings/GeneralPane.cpp:159 msgid "Show Current Game on Discord" msgstr "在 Discord 软件中显示当前游戏" #: Source/Core/DolphinQt/Config/ARCodeWidget.cpp:130 #: Source/Core/DolphinQt/Config/GeckoCodeWidget.cpp:276 msgid "Show Disabled Codes First" msgstr "优先显示禁用的代码" #: Source/Core/DolphinQt/MenuBar.cpp:690 msgid "Show ELF/DOL" msgstr "显示 ELF/DOL" #: Source/Core/DolphinQt/Config/ARCodeWidget.cpp:129 #: Source/Core/DolphinQt/Config/GeckoCodeWidget.cpp:275 msgid "Show Enabled Codes First" msgstr "优先显示启用的代码" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:57 msgid "Show FPS" msgstr "显示 FPS" #: Source/Core/DolphinQt/MenuBar.cpp:798 msgid "Show Frame Counter" msgstr "显示帧计数器" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:58 msgid "Show Frame Times" msgstr "显示帧生成时间" #: Source/Core/DolphinQt/MenuBar.cpp:716 msgid "Show France" msgstr "显示法国" #: Source/Core/DolphinQt/MenuBar.cpp:688 msgid "Show GameCube" msgstr "显示 GameCube" #: Source/Core/DolphinQt/MenuBar.cpp:717 msgid "Show Germany" msgstr "显示德国" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:231 msgid "Show Golf Mode Overlay" msgstr "叠加显示高尔夫模式" #: Source/Core/Core/HotkeyManager.cpp:199 msgid "Show Infinity Base" msgstr "显示 Infinity 底座" #: Source/Core/DolphinQt/MenuBar.cpp:804 msgid "Show Input Display" msgstr "显示输入回显" #: Source/Core/DolphinQt/MenuBar.cpp:718 msgid "Show Italy" msgstr "显示意大利" #: Source/Core/DolphinQt/MenuBar.cpp:712 msgid "Show JPN" msgstr "显示日本" #: Source/Core/DolphinQt/MenuBar.cpp:719 msgid "Show Korea" msgstr "显示韩国" #: Source/Core/DolphinQt/MenuBar.cpp:792 msgid "Show Lag Counter" msgstr "显示延迟计数器" #: Source/Core/DolphinQt/Config/InfoWidget.cpp:152 msgid "Show Language:" msgstr "显示语言：" #: Source/Core/DolphinQt/MenuBar.cpp:421 msgid "Show Log &Configuration" msgstr "显示日志设置(&C)" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:107 msgid "Show NetPlay Messages" msgstr "显示联机信息" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:104 msgid "Show NetPlay Ping" msgstr "显示联机延迟" #: Source/Core/DolphinQt/MenuBar.cpp:720 msgid "Show Netherlands" msgstr "显示荷兰" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:180 msgid "Show On-Screen Display Messages" msgstr "显示屏显消息" #: Source/Core/DolphinQt/MenuBar.cpp:713 msgid "Show PAL" msgstr "显示 PAL" #. i18n: Here, PC is an acronym for program counter, not personal computer. #: Source/Core/Core/HotkeyManager.cpp:72 Source/Core/DolphinQt/ToolBar.cpp:111 msgid "Show PC" msgstr "显示 PC" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:61 msgid "Show Performance Graphs" msgstr "显示性能图表" #: Source/Core/DolphinQt/MenuBar.cpp:693 msgid "Show Platforms" msgstr "显示平台" #: Source/Core/DolphinQt/MenuBar.cpp:727 msgid "Show Regions" msgstr "显示地区" #: Source/Core/DolphinQt/MenuBar.cpp:786 msgid "Show Rerecord Counter" msgstr "显示重录计数器" #: Source/Core/DolphinQt/MenuBar.cpp:721 msgid "Show Russia" msgstr "显示俄罗斯" #: Source/Core/Core/HotkeyManager.cpp:198 msgid "Show Skylanders Portal" msgstr "显示 Skylanders 传送门" #: Source/Core/DolphinQt/MenuBar.cpp:722 msgid "Show Spain" msgstr "显示西班牙" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:63 msgid "Show Speed Colors" msgstr "显示速度颜色" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:86 msgid "Show Statistics" msgstr "显示统计数据" #: Source/Core/DolphinQt/MenuBar.cpp:811 msgid "Show System Clock" msgstr "显示系统频率" #: Source/Core/DolphinQt/MenuBar.cpp:723 msgid "Show Taiwan" msgstr "显示台湾" #: Source/Core/DolphinQt/MenuBar.cpp:714 msgid "Show USA" msgstr "显示美国" #: Source/Core/DolphinQt/MenuBar.cpp:725 msgid "Show Unknown" msgstr "显示未知" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:60 msgid "Show VBlank Times" msgstr "显示垂直消隐时间" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:59 msgid "Show VPS" msgstr "显示 VPS" #: Source/Core/DolphinQt/MenuBar.cpp:689 msgid "Show WAD" msgstr "显示 WAD" #: Source/Core/DolphinQt/MenuBar.cpp:687 msgid "Show Wii" msgstr "显示 Wii" #: Source/Core/DolphinQt/MenuBar.cpp:724 msgid "Show World" msgstr "显示全球" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:578 msgid "Show in &memory" msgstr "在内存中显示(&M)" #: Source/Core/DolphinQt/Debugger/BreakpointWidget.cpp:405 msgid "Show in Code" msgstr "在代码中显示" #: Source/Core/DolphinQt/Debugger/BreakpointWidget.cpp:422 #: Source/Core/DolphinQt/Debugger/WatchWidget.cpp:356 msgid "Show in Memory" msgstr "在内存中显示" #: Source/Core/DolphinQt/Debugger/MemoryViewWidget.cpp:897 msgid "Show in code" msgstr "在代码中显示" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:500 msgid "Show in memory" msgstr "在内存中显示" #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:143 msgid "Show in server browser" msgstr "在服务器浏览器中显示" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:580 msgid "Show target in memor&y" msgstr "在内存中显示目标(&Y)" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:268 msgid "" "Shows chat messages, buffer changes, and desync alerts while playing NetPlay." "

If unsure, leave this unchecked." msgstr "" "在联机游戏时显示聊天消息、缓冲变化和未同步警告。

如" "无法确定，请不要选中此项。" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:270 msgid "" "Shows frametime graph along with statistics as a representation of emulation " "performance.

If unsure, leave this unchecked." msgstr "" "显示帧时间图以及统计数据来展现模拟性能。

如无法确" "定，请不要选中此项。" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:274 #, c-format msgid "" "Shows the % speed of emulation compared to full speed." "

If unsure, leave this unchecked." msgstr "" "显示与全速相对的百分比模拟速度。

如无法确定，请不要" "选中此项。" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:258 msgid "" "Shows the average time in ms between each distinct rendered frame alongside " "the standard deviation.

If unsure, leave this " "unchecked." msgstr "" "以毫秒显示每个不同渲染帧与标准差之间的平均时间。

如" "无法确定，请不要选中此项。" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:266 msgid "" "Shows the average time in ms between each rendered frame alongside the " "standard deviation.

If unsure, leave this unchecked." "" msgstr "" "以毫秒显示每个渲染帧与标准差之间的平均时间。

如无法" "确定，请不要选中此项。" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:254 msgid "" "Shows the number of distinct frames rendered per second as a measure of " "visual smoothness.

If unsure, leave this unchecked." "" msgstr "" "显示每秒呈现的不同帧数以衡量视觉平滑度。

如无法确" "定，请不要选中此项。" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:262 msgid "" "Shows the number of frames rendered per second as a measure of emulation " "speed.

If unsure, leave this unchecked." msgstr "" "显示每秒渲染的帧数以衡量模拟速度。

如无法确定，请不" "要选中此项。" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:265 msgid "" "Shows the player's maximum ping while playing on NetPlay." "

If unsure, leave this unchecked." msgstr "" "在联机游戏时显示玩家的最大延迟。

如无法确定，请不要" "选中此项。" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:295 msgid "" "Shows various rendering statistics.

If unsure, " "leave this unchecked." msgstr "" "显示各种渲染统计数据。

如无法确定，请不要选中此项。" "" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:210 msgid "Side-by-Side" msgstr "左右" #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.cpp:265 msgid "Sideways Hold" msgstr "保持横握" #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.cpp:262 msgid "Sideways Toggle" msgstr "切换横握" #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.cpp:308 msgid "Sideways Wii Remote" msgstr "横握 Wii 遥控器" #: Source/Core/DolphinQt/MenuBar.cpp:995 msgid "Signature Database" msgstr "签名数据库" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:144 #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:195 msgid "Signed 16" msgstr "有符号 16" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:145 #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:196 msgid "Signed 32" msgstr "有符号 32" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:143 #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:194 msgid "Signed 8" msgstr "有符号 8" #: Source/Core/DolphinQt/Debugger/RegisterWidget.cpp:150 msgid "Signed Integer" msgstr "有符号整数" #: Source/Core/DiscIO/Enums.cpp:98 #: Source/Core/DolphinQt/Settings/WiiPane.cpp:175 msgid "Simplified Chinese" msgstr "简体中文" #: Source/Core/DolphinQt/Config/Mapping/GCPadWiiUConfigDialog.cpp:40 msgid "Simulate DK Bongos" msgstr "模仿 DK 小对鼓" #: Source/Core/DolphinQt/Config/FreeLookWidget.cpp:47 msgid "Six Axis" msgstr "六轴" #: Source/Core/DolphinQt/Config/FilesystemWidget.cpp:61 #: Source/Core/DolphinQt/GameList/GameListModel.cpp:228 msgid "Size" msgstr "大小" #: Source/Core/DolphinQt/Settings/AudioPane.cpp:152 msgid "" "Size of stretch buffer in milliseconds. Values too low may cause audio " "crackling." msgstr "伸缩缓冲区的大小，以毫秒计。数值过低可能导致噼啪声。" #: Source/Core/Core/HotkeyManager.cpp:69 Source/Core/DolphinQt/ToolBar.cpp:109 msgid "Skip" msgstr "跳过" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:126 msgid "Skip Drawing" msgstr "跳过绘制" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:49 msgid "Skip EFB Access from CPU" msgstr "跳过 CPU 对 EFB 访问" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:73 msgid "Skip Main Menu" msgstr "跳过主菜单" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:95 msgid "Skip Presenting Duplicate Frames" msgstr "跳过重复出现的帧" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:292 msgid "" "Skips Vertical Blank Interrupts when lag is detected, allowing for smooth " "audio playback when emulation speed is not 100%. " "

WARNING: Can cause freezes and compatibility " "issues.

If unsure, leave this " "unchecked." msgstr "" "检测到延迟时跳过垂直消隐中断，从而在模拟速度不是 100% 时平滑地播放音频。" "

警告：可能导致卡死和兼容性问题。

如无法确定，请不要选中此项。" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:262 msgid "" "Skips presentation of duplicate frames (XFB copies) in 25fps/30fps games. " "This may improve performance on low-end devices, while making frame pacing " "less consistent.

Disable this option as well as enabling V-Sync for " "optimal frame pacing.

If unsure, leave this checked." "" msgstr "" "在 25fps/30fps 游戏中跳过重复帧（XFB 副本）的显示。这可以提高低端设备的性能，" "同时会降低帧定步的一致性。

可禁用此选项并启用 “垂直同步” 来获得最佳" "的帧定步。

如无法确定，请选中此项。" #. i18n: One of the figure types in the Skylanders games. #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:416 msgid "Skylander" msgstr "Skylander" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:188 msgid "Skylander %1" msgstr "Skylander %1" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:569 #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:637 msgid "Skylander (*.sky);;All Files (*)" msgstr "Skylander (*.sky);;所有文件 (*)" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:228 msgid "Skylander Collection Path:" msgstr "Skylander 合集路径：" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:535 msgid "Skylander not found in this collection. Create new file?" msgstr "在此合集中未找到 Skylander。是否创建新文件？" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:45 msgid "Skylanders Manager" msgstr "Skylander 管理器" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:84 msgid "Skylanders folder not found for this user. Create new folder?" msgstr "未找到该用户的 Skylanders 文件夹。是否创建新文件夹？" #: Source/Core/Core/HW/WiimoteEmu/Extension/Guitar.cpp:97 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:140 msgid "Slider Bar" msgstr "滑品板" #: Source/Core/DolphinQt/GCMemcardManager.cpp:134 msgid "Slot A" msgstr "插槽 A" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:164 msgid "Slot A:" msgstr "插槽 A:" #: Source/Core/DolphinQt/GCMemcardManager.cpp:134 msgid "Slot B" msgstr "插槽 B" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:178 msgid "Slot B:" msgstr "插槽 B:" #: Source/Core/InputCommon/ControllerEmu/ControlGroup/ControlGroup.cpp:35 msgid "Snap the thumbstick position to the nearest octagonal axis." msgstr "捕获挨着最近八边形轴的拇指摇杆位置" #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:324 msgid "Socket table" msgstr "套接字表" #: Source/Core/VideoBackends/Software/SWmain.cpp:55 msgid "Software Renderer" msgstr "软件渲染器" #: Source/Core/DiscIO/VolumeVerifier.cpp:1322 msgid "Some of the data could not be read." msgstr "一些数据无法读取。" #: Source/Core/DiscIO/VolumeVerifier.cpp:1048 msgid "" "Some padding data that should be zero is not zero. This can make the game " "freeze at certain points." msgstr "一些应为零的填充数据没有为零。这会使游戏在某些节点处卡死。" #: Source/Core/DolphinQt/Config/NewPatchDialog.cpp:257 msgid "" "Some values you provided are invalid.\n" "Please check the highlighted values." msgstr "" "您提供的某些值无效。\n" "请检查高亮显示的值。" #: Source/Core/DolphinQt/Config/ARCodeWidget.cpp:128 #: Source/Core/DolphinQt/Config/GeckoCodeWidget.cpp:274 msgid "Sort Alphabetically" msgstr "按字母排序" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:179 msgid "Sound:" msgstr "声音：" #: Source/Core/UICommon/NetPlayIndex.cpp:250 msgid "South America" msgstr "南美" #: Source/Core/DiscIO/Enums.cpp:54 msgid "Spain" msgstr "西班牙" #: Source/Core/DiscIO/Enums.cpp:89 #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:87 #: Source/Core/DolphinQt/Settings/WiiPane.cpp:172 msgid "Spanish" msgstr "西班牙语" #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.cpp:291 msgid "Speaker Pan" msgstr "扬声器声像" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:368 msgid "Speaker Volume:" msgstr "扬声器音量：" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:123 msgid "Specialized (Default)" msgstr "专门化（默认）" #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:188 msgid "Specific" msgstr "特定" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:352 msgid "" "Specifies the zlib compression level to use when saving PNG images (both for " "screenshots and framedumping).

Since PNG uses lossless compression, " "this does not affect the image quality; instead, it is a trade-off between " "file size and compression time.

A value of 0 uses no compression at " "all. A value of 1 uses very little compression, while the maximum value of " "9 applies a lot of compression. However, for PNG files, levels between 3 " "and 6 are generally about as good as level 9 but finish in significantly " "less time.

If unsure, leave this at 6." msgstr "" "指定保存 PNG 图像时使用的 zlib 压缩级别（用于屏幕截图和帧转储）。

由" "于 PNG 使用无损压缩，因此不会影响图像质量；是文件大小和压缩时长的均衡。" "

值为 0 时不使用压缩。值为 1 压缩程度较小，而最大值 9 则使用高强度压" "缩。对于 PNG 文件，在 3 和 9 之间的压缩程度通常与级别 9 相仿，但完成时间要短" "得多。

如无法确定，请将其保留为 6。" #: Source/Core/Core/FreeLookManager.cpp:95 #: Source/Core/DolphinQt/Config/Mapping/FreeLookGeneral.cpp:24 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Force.cpp:42 msgid "Speed" msgstr "速度" #. i18n: Figures for the game Skylanders: Spyro's Adventure. The game has the same title in all #. countries it was released in, except Japan, where it's named スカイランダーズ スパイロの大冒険. #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:275 msgid "Spyro's Adventure" msgstr "小龙斯派罗的大冒险" #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:186 msgid "Stack end" msgstr "堆栈结束" #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:186 msgid "Stack start" msgstr "堆栈开始" #: Source/Core/DolphinQt/Config/GamecubeControllersWidget.cpp:36 msgid "Standard Controller" msgstr "标准控制器" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:131 #: Source/Core/DolphinQt/RiivolutionBootWidget.cpp:66 msgid "Start" msgstr "开始" #: Source/Core/DolphinQt/MenuBar.cpp:244 msgid "Start &NetPlay..." msgstr "开始联机...(&N)" #: Source/Core/DolphinQt/CheatsManager.cpp:160 msgid "Start New Cheat Search" msgstr "开始新的金手指搜索" #: Source/Core/DolphinQt/MenuBar.cpp:757 msgid "Start Re&cording Input" msgstr "开始录制输入(&C)" #: Source/Core/Core/HotkeyManager.cpp:55 #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:69 #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:333 msgid "Start Recording" msgstr "开始录制" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:74 msgid "Start in Fullscreen" msgstr "以全屏启动" #: Source/Core/DolphinQt/RiivolutionBootWidget.cpp:48 msgid "Start with Riivolution Patches" msgstr "启动时附带 Riivolution 补丁" #: Source/Core/DolphinQt/GameList/GameList.cpp:411 msgid "Start with Riivolution Patches..." msgstr "启动时附带 Riivolution 补丁..." #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:872 msgid "Started game" msgstr "游戏已启动" #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:330 #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:352 #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:72 #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:182 msgid "State" msgstr "状态" #: Source/Core/DolphinQt/Config/GamecubeControllersWidget.cpp:38 msgid "Steering Wheel" msgstr "方向盘" #. i18n: Here, "Step" is a verb. This feature is used for #. going through code step by step. #: Source/Core/DolphinQt/ToolBar.cpp:102 msgid "Step" msgstr "单步" #. i18n: Here, "Step" is a verb. This feature is used for #. going through code step by step. #: Source/Core/Core/HotkeyManager.cpp:62 msgid "Step Into" msgstr "跳入" #. i18n: Here, "Step" is a verb. This feature is used for #. going through code step by step. #: Source/Core/Core/HotkeyManager.cpp:68 Source/Core/DolphinQt/ToolBar.cpp:108 msgid "Step Out" msgstr "单步跳出" #. i18n: Here, "Step" is a verb. This feature is used for #. going through code step by step. #: Source/Core/Core/HotkeyManager.cpp:65 Source/Core/DolphinQt/ToolBar.cpp:105 msgid "Step Over" msgstr "单步跳过" #: Source/Core/DolphinQt/Debugger/CodeWidget.cpp:570 msgid "Step out successful!" msgstr "跳出成功！" #: Source/Core/DolphinQt/Debugger/CodeWidget.cpp:568 msgid "Step out timed out!" msgstr "跳出超时！" #: Source/Core/DolphinQt/Debugger/CodeWidget.cpp:487 msgid "Step over in progress..." msgstr "跳过正在处理..." #: Source/Core/DolphinQt/Debugger/CodeWidget.cpp:465 msgid "Step successful!" msgstr "单步成功！" #: Source/Core/Core/HotkeyManager.cpp:338 #: Source/Core/DolphinQt/Config/Mapping/HotkeyDebugging.cpp:21 msgid "Stepping" msgstr "步进" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:182 msgid "Stereo" msgstr "立体声" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:652 msgid "Stereoscopic 3D Mode" msgstr "立体 3D 模式" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:218 msgid "Stereoscopic 3D Mode:" msgstr "立体 3D 模式：" #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:122 #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:206 msgid "Stereoscopy" msgstr "立体 3D" #: Source/Core/Core/HW/WiimoteEmu/Extension/Drums.cpp:81 #: Source/Core/Core/HW/WiimoteEmu/Extension/Guitar.cpp:90 #: Source/Core/Core/HW/WiimoteEmu/Extension/Nunchuk.h:176 #: Source/Core/Core/HW/WiimoteEmu/Extension/Turntable.cpp:76 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:76 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:106 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:124 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:151 msgid "Stick" msgstr "摇杆" #: Source/Core/Core/HotkeyManager.cpp:32 #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:153 #: Source/Core/DolphinQt/ToolBar.cpp:123 msgid "Stop" msgstr "停止" #: Source/Core/DolphinQt/MenuBar.cpp:760 msgid "Stop Playing/Recording Input" msgstr "停止播放/录制输入" #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:325 msgid "Stop Recording" msgstr "停止录制" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:409 msgid "Stopped game" msgstr "游戏已停止" #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:216 #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:53 msgid "Store EFB Copies to Texture Only" msgstr "仅存储 EFB 副本为纹理" #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:219 #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:92 msgid "Store XFB Copies to Texture Only" msgstr "仅存储 XFB 副本为纹理" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:233 msgid "" "Stores EFB copies exclusively on the GPU, bypassing system memory. Causes " "graphical defects in a small number of games.

Enabled = EFB Copies to " "Texture
Disabled = EFB Copies to RAM (and " "Texture)

If unsure, leave this checked." msgstr "" "绕过系统内存而仅在 GPU 中存储 EFB 副本。会在少数游戏中导致图形缺陷。

" "开启 = EFB 副本为纹理
关闭 = EFB 副本为内存（和纹理）" "

如无法确定，请选中此项。" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:252 msgid "" "Stores XFB copies exclusively on the GPU, bypassing system memory. Causes " "graphical defects in a small number of games.

Enabled = XFB Copies to " "Texture
Disabled = XFB Copies to RAM (and " "Texture)

If unsure, leave this checked." msgstr "" "绕过系统内存而仅在 GPU 中存储 XFB 副本。会在少数游戏中导致图形缺陷。

" "开启 = XFB 副本为纹理
关闭 = XFB 副本为内存（和纹理）" "

如无法确定，请选中此项。" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:59 msgid "Stretch to Window" msgstr "拉伸到窗口大小" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:175 msgid "Strict Settings Sync" msgstr "严格设置同步" #. i18n: Data type used in computing #: Source/Core/DolphinQt/Debugger/WatchWidget.cpp:95 msgid "String" msgstr "字符串" #: Source/Core/Core/HW/WiimoteEmu/Extension/Guitar.cpp:78 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:129 msgid "Strum" msgstr "拨弦" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:136 msgid "Style:" msgstr "样式：" #: Source/Core/Core/HW/WiimoteEmu/Extension/DrawsomeTablet.cpp:29 #: Source/Core/Core/HW/WiimoteEmu/Extension/UDrawTablet.cpp:48 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:192 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:206 msgid "Stylus" msgstr "手写笔" #: Source/Core/DolphinQt/Config/FilesystemWidget.cpp:259 #: Source/Core/DolphinQt/Config/FilesystemWidget.cpp:384 #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:284 #: Source/Core/DolphinQt/ConvertDialog.cpp:537 #: Source/Core/DolphinQt/GameList/GameList.cpp:631 #: Source/Core/DolphinQt/GameList/GameList.cpp:661 #: Source/Core/DolphinQt/MenuBar.cpp:1081 #: Source/Core/DolphinQt/MenuBar.cpp:1215 msgid "Success" msgstr "成功" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:455 msgid "Successfully added to the NetPlay index" msgstr "已成功加入联机索引" #: Source/Core/DolphinQt/ConvertDialog.cpp:538 #, c-format msgctxt "" msgid "Successfully converted %n image(s)." msgstr "成功转换 %n 个镜像。" #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:285 msgid "Successfully deleted '%1'." msgstr "成功删除 '%1'。" #: Source/Core/DolphinQt/GCMemcardManager.cpp:497 msgctxt "" msgid "Successfully exported %n out of %1 save file(s)." msgstr "在 %1 个存档文件中 %n 个导出成功。" #: Source/Core/DolphinQt/GameList/GameList.cpp:593 msgid "Successfully exported save files" msgstr "成功导出存档文件" #: Source/Core/DolphinQt/MenuBar.cpp:1216 msgid "Successfully extracted certificates from NAND" msgstr "已成功从 NAND 中提取证书" #: Source/Core/DolphinQt/Config/FilesystemWidget.cpp:384 msgid "Successfully extracted file." msgstr "提取文件成功。" #: Source/Core/DolphinQt/Config/FilesystemWidget.cpp:260 msgid "Successfully extracted system data." msgstr "提取系统数据成功。" #: Source/Core/DolphinQt/MenuBar.cpp:1111 msgid "Successfully imported save file." msgstr "导入存档文件成功。" #: Source/Core/DolphinQt/GameList/GameList.cpp:632 #: Source/Core/DolphinQt/MenuBar.cpp:1082 msgid "Successfully installed this title to the NAND." msgstr "成功将此软件安装到 NAND。" #: Source/Core/DolphinQt/GameList/GameList.cpp:662 msgid "Successfully removed this title from the NAND." msgstr "成功将此软件从 NAND 中移除。" #. i18n: Figures for the games Skylanders: SuperChargers (not available for the Wii) and #. Skylanders: SuperChargers Racing (available for the Wii). The games have the same titles in #. all countries they were released in. They were not released in Japan. #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:288 msgid "SuperChargers" msgstr "超级充能者" #: Source/Core/DolphinQt/AboutDialog.cpp:69 msgid "Support" msgstr "支持" #: Source/Core/DolphinQt/GCMemcardManager.cpp:589 msgid "Supported file formats" msgstr "支持的文件格式" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:217 msgid "Supports SD and SDHC. Default size is 128 MB." msgstr "支持 SD 和 SDHC 格式。默认大小为 128 MB。" #. i18n: Surround audio (Dolby Pro Logic II) #: Source/Core/DolphinQt/Settings/WiiPane.cpp:184 msgid "Surround" msgstr "环绕" #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:184 msgid "Suspended" msgstr "已暂停" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:216 msgid "Swap Eyes" msgstr "交换双眼" #. i18n: Figures for the game Skylanders: Swap Force. The game has the same title in all countries #. it was released in. It was not released in Japan. #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:281 msgid "Swap Force" msgstr "交换力量" #. i18n: One of the figure types in the Skylanders games. #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:420 msgid "Swapper" msgstr "交换者" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:589 msgid "" "Swaps the left and right eye. Most useful in side-by-side stereoscopy mode." "

If unsure, leave this unchecked." msgstr "" "交换左右眼图像。通常用于左右并排立体模式。

如无法确" "定，请不要选中此项。" #: Source/Core/Core/HW/WiimoteEmu/Extension/Nunchuk.cpp:58 #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.cpp:231 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtensionMotionSimulation.cpp:35 msgid "Swing" msgstr "挥舞" #: Source/Core/DolphinQt/GCMemcardManager.cpp:243 msgid "Switch to A" msgstr "转换到 A" #: Source/Core/DolphinQt/GCMemcardManager.cpp:243 msgid "Switch to B" msgstr "转换到 B" #. i18n: The symbolic name of a code block #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:90 #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:264 #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:498 #: Source/Core/DolphinQt/Debugger/JITWidget.cpp:84 msgid "Symbol" msgstr "符号" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:986 msgid "Symbol (%1) end address:" msgstr "符号 (%1) 终止地址:" #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:211 #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:312 msgid "" "Symbol map not found.\n" "\n" "If one does not exist, you can generate one from the Menu bar:\n" "Symbols -> Generate Symbols From ->\n" "\tAddress | Signature Database | RSO Modules" msgstr "" "未找到符号映射。\n" "\n" "如果不存在，你可以从菜单栏生成一个：\n" "符号 -> 生成符号自 ->\n" "\t地址 | 签名数据库 | RSO 模块" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:925 msgid "Symbol name:" msgstr "符号名:" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:159 #: Source/Core/DolphinQt/Debugger/CodeWidget.cpp:136 #: Source/Core/DolphinQt/MenuBar.cpp:989 msgid "Symbols" msgstr "符号" #: Source/Core/DolphinQt/Config/WiimoteControllersWidget.cpp:107 msgid "Sync" msgstr "同步" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:173 msgid "Sync AR/Gecko Codes" msgstr "同步 AR/Gecko 代码" #: Source/Core/DolphinQt/Config/WiimoteControllersWidget.cpp:110 msgid "Sync real Wii Remotes and pair them" msgstr "同步并配对真实 Wii 遥控器" #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:90 msgid "Synchronize GPU thread" msgstr "同步 GPU 线程" #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:104 msgid "" "Synchronizes the GPU and CPU threads to help prevent random freezes in Dual " "core mode. (ON = Compatible, OFF = Fast)" msgstr "" "同步 GPU 与 CPU 线程以帮助防止双核模式下的随机卡死。（开=兼容，关=快速）" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:240 msgid "" "Synchronizes the SD Card with the SD Sync Folder when starting and ending " "emulation." msgstr "在开始和结束模拟时将 SD 卡与 SD 同步文件夹同步。" #: Source/Core/Core/NetPlayClient.cpp:1434 msgid "Synchronizing AR codes..." msgstr "正在同步 AR 代码..." #: Source/Core/Core/NetPlayClient.cpp:1367 msgid "Synchronizing Gecko codes..." msgstr "正在同步 Gecko 代码..." #: Source/Core/Core/NetPlayClient.cpp:1050 msgid "Synchronizing save data..." msgstr "正在同步存档数据..." #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:83 #: Source/Core/DolphinQt/Settings/WiiPane.cpp:166 msgid "System Language:" msgstr "系统语言：" #: Source/Core/DolphinQt/MenuBar.cpp:776 msgid "TAS Input" msgstr "TAS 输入" #. i18n: TAS is short for tool-assisted speedrun. Read http://tasvideos.org/ for details. #. Frame advance is an example of a typical TAS tool. #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:449 msgid "TAS Tools" msgstr "TAS 工具" #: Source/Core/DolphinQt/GameList/GameList.cpp:502 #: Source/Core/DolphinQt/GameList/GameList.cpp:1013 #: Source/Core/DolphinQt/GameList/GameListModel.cpp:236 #: Source/Core/DolphinQt/MenuBar.cpp:665 msgid "Tags" msgstr "标签" #. i18n: The drum controller used in "Taiko no Tatsujin" games. Also known as a "TaTaCon". #: Source/Core/Core/HW/WiimoteEmu/Extension/TaTaCon.cpp:40 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:219 msgid "Taiko Drum" msgstr "太鼓" #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:167 msgid "Tail" msgstr "尾" #: Source/Core/DiscIO/Enums.cpp:57 msgid "Taiwan" msgstr "台湾" #: Source/Core/Core/HotkeyManager.cpp:35 Source/Core/DolphinQt/MenuBar.cpp:334 msgid "Take Screenshot" msgstr "屏幕截图" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:664 msgid "Target address range is invalid." msgstr "目标地址范围无效。" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:696 msgid "" "Target value was overwritten by current instruction.\n" "Instructions executed: %1" msgstr "" "目标值被当前指令覆盖。\n" "执行的指令： %1" #. i18n: One of the elements in the Skylanders games. Japanese: マシン. For official translations #. in other languages, check the SuperChargers manual at https://support.activision.com/manuals #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:346 msgid "Tech" msgstr "科技" #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:263 msgid "Test" msgstr "测试" #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:223 #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:63 msgid "Texture Cache" msgstr "纹理缓存" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:302 msgid "Texture Cache Accuracy" msgstr "纹理缓存精度" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:121 msgid "Texture Dumping" msgstr "转储纹理" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:624 msgid "Texture Filtering" msgstr "纹理过滤" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:172 msgid "Texture Filtering:" msgstr "纹理过滤：" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:88 msgid "Texture Format Overlay" msgstr "显示纹理格式" #: Source/Core/Core/FifoPlayer/FifoDataFile.cpp:237 msgid "" "The DFF's minimum loader version ({0}) exceeds the version of this FIFO " "Player ({1})" msgstr "DFF 的最低加载程序版本 ({0}) 超过此 FIFO 播放器的版本 ({1})" #: Source/Core/VideoBackends/D3D/D3DMain.cpp:57 msgid "" "The Direct3D 11 renderer requires support for features not supported by your " "system configuration. You may still use this backend, but you will encounter " "graphical artifacts in certain games.\n" "\n" "Do you really want to switch to Direct3D 11? If unsure, select 'No'." msgstr "" "Direct3D 11 渲染器需要某些您的系统配置所不支持的特性。您仍然可以使用此后端，" "但您可能会在某些游戏中遇到图像错误。\n" "\n" "您真的想要切换到 Direct3D 11 吗？如无法确定，请选择“否”。" #: Source/Core/DiscIO/VolumeVerifier.cpp:601 msgid "The H3 hash table for the {0} partition is not correct." msgstr "分区 {0} 的 H3 哈希表不正确。" #: Source/Core/Core/Boot/Boot.cpp:435 msgid "The IPL file is not a known good dump. (CRC32: {0:x})" msgstr "此 IPL 文件不是已知的正确转储。(CRC32: {0:x})" #. i18n: This string is referring to a game mode in Super Smash Bros. Brawl called Masterpieces #. where you play demos of NES/SNES/N64 games. Official translations: #. 名作トライアル (Japanese), Masterpieces (English), Meisterstücke (German), Chefs-d'œuvre #. (French), Clásicos (Spanish), Capolavori (Italian), 클래식 게임 체험판 (Korean). #. If your language is not one of the languages above, consider leaving the string untranslated #. so that people will recognize it as the name of the game mode. #: Source/Core/DiscIO/VolumeVerifier.cpp:484 msgid "The Masterpiece partitions are missing." msgstr "缺少杰作分区。" #: Source/Core/DolphinQt/MenuBar.cpp:1207 msgid "" "The NAND could not be repaired. It is recommended to back up your current " "data and start over with a fresh NAND." msgstr "该 NAND 无法修复。建议备份您当前的数据并使用新的 NAND 启动。" #: Source/Core/DolphinQt/MenuBar.cpp:1202 msgid "The NAND has been repaired." msgstr "NAND 已修复。" #: Source/Core/DiscIO/VolumeVerifier.cpp:1003 msgid "" "The TMD is not correctly signed. If you move or copy this title to the SD " "Card, the Wii System Menu will not launch it anymore and will also refuse to " "copy or move it back to the NAND." msgstr "" "TMD 文件未正确签名。如果你将此游戏移动或复制到 SD 卡，Wii 系统菜单将不再运行" "该游戏，并且也会拒绝将其复制或移动回 NAND。" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:170 msgid "The amount of money this skylander should have. Between 0 and 65000" msgstr "此 Skylander 拥有的金钱数量。介于 0 至 65000 之间" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:282 msgid "" "The amount of time the FPS and VPS counters will sample over.

The " "higher the value, the more stable the FPS/VPS counter will be, but the " "slower it will be to update.

If unsure, leave this " "at 1000ms." msgstr "" "FPS 和 VPS 计数器采样的时间量。

值越高，FPS/VPS 计数器越稳定，但其更新" "速度也越慢。

如无法确定，请将其保留为 1000 毫秒。" #: Source/Core/DiscIO/VolumeVerifier.cpp:467 msgid "The channel partition is missing." msgstr "缺少通道分区。" #: Source/Core/DiscIO/VolumeVerifier.cpp:462 msgid "The data partition is missing." msgstr "缺少数据分区。" #: Source/Core/DiscIO/VolumeVerifier.cpp:501 msgid "" "The data partition is not at its normal position. This will affect the " "emulated loading times. You will be unable to share input recordings and use " "NetPlay with anyone who is using a good dump." msgstr "" "数据分区不在正常位置。这会影响模拟的加载时间。你将无法与正在使用正确转储的其" "他人共享输入录制和使用联机功能。" #: Source/Core/DiscIO/VolumeVerifier.cpp:614 msgid "" "The data size for the {0} partition is not evenly divisible by the block " "size." msgstr "分区 {0} 的数据大小无法用区块大小平均分配。" #: Source/Android/jni/WiiUtils.cpp:114 msgid "The decryption keys need to be appended to the NAND backup file." msgstr "解密密钥需要附加到 NAND 备份文件中。" #: Source/Core/DolphinQt/ConvertDialog.cpp:427 msgid "" "The destination file cannot be the same as the source file\n" "\n" "Please select another destination path for \"%1\"" msgstr "" "目标文件不能与源文件相同\n" "\n" "请为“ %1 ”选择另一个目标路径" #: Source/Core/Core/Movie.cpp:362 msgid "" "The disc change to \"{0}\" could not be saved in the .dtm file.\n" "The filename of the disc image must not be longer than 40 characters." msgstr "" "光盘切换为 “{0}” 无法保存至 .dtm 文件中。\n" "光盘镜像的文件名不能超过 40 个字符。" #: Source/Core/Core/HW/DVD/DVDThread.cpp:310 msgid "The disc could not be read (at {0:#x} - {1:#x})." msgstr "无法读取此光盘 (at {0:#x} - {1:#x})。" #: Source/Core/Core/HW/DVD/DVDInterface.cpp:438 msgid "The disc that was about to be inserted couldn't be found." msgstr "无法找到已可插入的光盘。" #: Source/Core/DolphinQt/NANDRepairDialog.cpp:36 msgid "" "The emulated NAND is damaged. System titles such as the Wii Menu and the Wii " "Shop Channel may not work correctly." msgstr "" "模拟的 NAND 已损坏。系统软件如 Wii 菜单和 Wii 商店频道可能无法正常工作。" #: Source/Core/DolphinQt/WiiUpdate.cpp:34 msgid "The emulated Wii console has been updated." msgstr "模拟的 Wii 主机已更新。" #: Source/Core/DolphinQt/WiiUpdate.cpp:39 msgid "The emulated Wii console is already up-to-date." msgstr "模拟的 Wii 主机已经是最新的。" #. i18n: MAC stands for Media Access Control. A MAC address uniquely identifies a network #. interface (physical) like a serial number. "MAC" should be kept in translations. #: Source/Core/DolphinQt/Settings/BroadbandAdapterSettingsDialog.cpp:111 msgid "The entered MAC address is invalid." msgstr "输入的 MAC 地址无效。" #. i18n: Here, PID means Product ID (for a USB device). #: Source/Core/DolphinQt/Settings/USBDeviceAddToWhitelistDialog.cpp:140 msgid "The entered PID is invalid." msgstr "输入的 PID 无效。" #. i18n: Here, VID means Vendor ID (for a USB device). #: Source/Core/DolphinQt/Settings/USBDeviceAddToWhitelistDialog.cpp:133 msgid "The entered VID is invalid." msgstr "输入的 VID 无效。" #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:539 msgid "The expression contains a syntax error." msgstr "此表达式含有语法错误。" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:471 msgid "" "The file\n" "%1\n" "is either corrupted or not a GameCube memory card file.\n" "%2" msgstr "" "此文件\n" "%1\n" "已损坏或不是 GameCube 存储卡文件。\n" "%2" #: Source/Core/DolphinQt/ConvertDialog.cpp:408 msgid "" "The file %1 already exists.\n" "Do you wish to replace it?" msgstr "" "文件 %1 已经存在。\n" "是否替换?" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:274 msgid "" "The file associated to this file was closed! Did you clear the slot before " "saving?" msgstr "与此文件关联的文件已关闭！可能是保存之前插槽已被清空？" #: Source/Core/AudioCommon/WaveFile.cpp:60 msgid "" "The file {0} could not be opened for writing. Please check if it's already " "opened by another program." msgstr "文件 {0} 无法以写入形式打开。请检查该文件是否已经被另一程序打开。" #: Source/Core/AudioCommon/WaveFile.cpp:52 msgid "The file {0} was already open, the file header will not be written." msgstr "文件 {0} 已经打开，文件头不会被写入。" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:450 msgid "" "The filename %1 does not conform to Dolphin's region code format for memory " "cards. Please rename this file to either %2, %3, or %4, matching the region " "of the save files that are on it." msgstr "" "文件名 %1 不符合 Dolphin 的存储卡区域代码格式。请将此文件重命名为 %2、%3 或 " "%4，以匹配其存档文件的区域。" #: Source/Core/DiscIO/VolumeVerifier.cpp:431 msgid "The filesystem is invalid or could not be read." msgstr "文件系统无效或无法读取。" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:573 msgid "" "The folder %1 does not conform to Dolphin's region code format for GCI " "folders. Please rename this folder to either %2, %3, or %4, matching the " "region of the save files that are in it." msgstr "" "文件夹 %1 不符合 Dolphin 的 GCI 文件夹区域代码格式。请将此文件夹重命名为 " "%2、%3 或 %4，以匹配其存档文件的区域。" #: Source/Core/DiscIO/VolumeVerifier.cpp:781 msgid "" "The format that the disc image is saved in does not store the size of the " "disc image." msgstr "此光盘镜像的保存格式不存储光盘镜像的大小。" #: Source/Core/DiscIO/VolumeVerifier.cpp:887 msgid "The game ID is inconsistent." msgstr "游戏 ID 不一致。" #: Source/Core/DiscIO/VolumeVerifier.cpp:898 msgid "The game ID is unusually short." msgstr "游戏 ID 异常短。" #: Source/Core/DiscIO/VolumeVerifier.cpp:879 msgid "The game ID is {0} but should be {1}." msgstr "游戏 ID 是 {0} ，但应该为 {1} 。" #: Source/Core/DolphinQt/WiiUpdate.cpp:73 msgid "The game disc does not contain any usable update information." msgstr "此游戏光盘未包含任何可用的更新信息。" #: Source/Core/Core/NetPlayClient.cpp:290 msgid "The game is currently running." msgstr "游戏当前正在运行。" #: Source/Core/DolphinQt/WiiUpdate.cpp:66 msgid "" "The game's region does not match your console's. To avoid issues with the " "system menu, it is not possible to update the emulated console using this " "disc." msgstr "" "该游戏区域与你的主机不匹配。为避免系统菜单出现问题，现无法使用此光盘更新模拟" "主机。" #: Source/Core/VideoBackends/OGL/OGLConfig.cpp:715 msgid "" "The graphics driver is forcibly enabling anti-aliasing for Dolphin. You need " "to turn this off in the graphics driver's settings in order for Dolphin to " "work.\n" "\n" "(MSAA with {0} samples found on default framebuffer)" msgstr "" "图形驱动程序强制启用 Dolphin 的抗锯齿功能。你需要在图形驱动程序的设置中将其关" "闭，以使 Dolphin 正常工作。\n" "\n" "（在默认帧缓冲区上发现 MSAA 的 {0} 个样本）" #: Source/Core/DolphinQt/NetPlay/GameDigestDialog.cpp:155 msgid "The hashes do not match!" msgstr "哈希值不匹配！" #: Source/Core/DolphinQt/NetPlay/GameDigestDialog.cpp:151 msgid "The hashes match!" msgstr "哈希值匹配！" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:171 msgid "" "The hero level of this skylander. Only seen in Skylanders: Spyro's " "Adventures. Between 0 and 100" msgstr "" "此 Skylander 的英雄等级。仅在《小龙斯派罗大冒险》中出场。介于 0 至 100 之间" #: Source/Core/Core/NetPlayClient.cpp:184 msgid "" "The host code is too long.\n" "Please recheck that you have the correct code." msgstr "" "主机代码太长。\n" "请重新检查你是否有正确的代码。" #: Source/Core/DiscIO/VolumeVerifier.cpp:472 msgid "The install partition is missing." msgstr "缺少安装分区。" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:178 msgid "The last time the figure has been placed on a portal" msgstr "最近一次将角色放置在传送门上的时间" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:176 msgid "" "The last time the figure has been reset. If the figure has never been reset, " "the first time the figure was placed on a portal" msgstr "" "最近一次重置角色的时间。如果角色从未重置过，则为角色第一次放置在传送门上的时" "间" #: Source/Core/Core/HW/EXI/EXI.cpp:50 msgid "" "The movie indicates that a memory card should be inserted into {0:n}, but " "one is not currently inserted (instead, {1} is inserted). For the movie to " "sync properly, please change the selected device to Memory Card or GCI " "Folder." msgstr "" "影片指示应将存储卡插入 {0:n}，但当前未插入存储卡（而是插入了 {1}）。为使影片" "正确同步，请将所选设备更改为存储卡或 GCI 文件夹。" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:173 msgid "The nickname for this skylander. Limited to 15 characters" msgstr "Skylander 的昵称。不能超过 15 个字符" #: Source/Core/DolphinQt/RiivolutionBootWidget.cpp:159 msgid "The patches in %1 are not for the selected game or game revision." msgstr "此 %1 中的补丁不适用于选定的游戏或游戏修订版。" #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:256 #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:297 msgid "The profile '%1' does not exist" msgstr "配置文件 '%1' 不存在" #: Source/Core/Core/Movie.cpp:219 msgid "The recorded game ({0}) is not the same as the selected game ({1})" msgstr "被录制的游戏 ({0}) 与所选游戏 ({1}) 不一致" #: Source/Core/DiscIO/VolumeVerifier.cpp:916 msgid "" "The region code does not match the game ID. If this is because the region " "code has been modified, the game might run at the wrong speed, graphical " "elements might be offset, or the game might not run at all." msgstr "" "区域代码与游戏 ID 不匹配。如果这是因为区域代码已被修改，那游戏可能以错误的速" "度运行、图形元素可能会被偏移或者游戏可能根本无法运行。" #: Source/Core/DolphinQt/Config/CheatCodeEditor.cpp:195 msgid "The resulting decrypted AR code doesn't contain any lines." msgstr "产生的已解密 AR 代码不包含任何行。" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:492 msgid "" "The same file can't be used in multiple slots; it is already used by %1." msgstr "同一文件不能在多个插槽中使用；其已被 %1 占用。" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:596 msgid "" "The same folder can't be used in multiple slots; it is already used by %1." msgstr "同一文件夹不能在多个插槽中使用；其已被 %1 占用。" #: Source/Core/Core/NetPlayClient.cpp:287 msgid "The server and client's NetPlay versions are incompatible." msgstr "服务器与客户端的联机版本不兼容。" #: Source/Core/Core/NetPlayClient.cpp:283 msgid "The server is full." msgstr "服务器已满。" #: Source/Core/Core/NetPlayClient.cpp:296 msgid "The server sent an unknown error message." msgstr "服务器发送了一个未知错误消息。" #: Source/Core/VideoBackends/Software/SWmain.cpp:60 msgid "" "The software renderer is significantly slower than other backends and is " "only recommended for debugging purposes.\n" "\n" "Do you really want to enable software rendering? If unsure, select 'No'." msgstr "" "软件渲染比其他后端要慢一个数量级，仅推荐用于调试目的。\n" "\n" "您真的想要启用软件渲染吗？如无法确定，请选择“否”。" #. i18n: This is "common" as in "shared", not the opposite of "uncommon" #: Source/Core/DiscIO/VolumeVerifier.cpp:976 msgid "The specified common key index is {0} but should be {1}." msgstr "指定的公用密钥索引是 {0} ，但应该为 {1} 。" #: Source/Core/Core/Boot/Boot.cpp:201 msgid "The specified file \"{0}\" does not exist" msgstr "指定的文件 “{0}” 不存在" #: Source/Core/DolphinQt/MenuBar.cpp:1165 msgid "" "The system-reserved part of your NAND contains %1 blocks (%2 KiB) of data, " "out of an allowed maximum of %3 blocks (%4 KiB)." msgstr "" "NAND 中的系统保留分区包含 %1 个数据块(%2 KiB)，而允许的最大数据块数为 %3 (%4 " "KiB)。" #: Source/Core/DolphinQt/GCMemcardManager.cpp:544 msgid "The target memory card already contains a file \"%1\"." msgstr "目标存储卡已包含文件 “%1”。" #. i18n: "Ticket" here is a kind of digital authorization to use a certain title (e.g. a game) #: Source/Core/DiscIO/VolumeVerifier.cpp:994 msgid "The ticket is not correctly signed." msgstr "ticket 文件未正确签名。" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:175 msgid "The total time this figure has been used inside a game in seconds" msgstr "在游戏中使用此角色的总时间（以秒为单位）" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:169 msgid "The toy code for this figure. Only available for real figures." msgstr "此角色的玩具代码。仅适用于真实存在的角色玩具。" #: Source/Core/DiscIO/VolumeVerifier.cpp:523 msgid "The type of a partition could not be read." msgstr "无法读取的分区类型。" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:83 msgid "The type of this Skylander does not have any data that can be modified!" msgstr "此 Skylander 类型没有任何数据可供修改！" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:90 msgid "The type of this Skylander is unknown!" msgstr "此 Skylander 的类型未知！" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:97 msgid "" "The type of this Skylander is unknown, or can't be modified at this time!" msgstr "此 Skylander 的类型未知，或当前还无法修改。" #: Source/Core/DolphinQt/WiiUpdate.cpp:60 msgid "" "The update has been cancelled. It is strongly recommended to finish it in " "order to avoid inconsistent system software versions." msgstr "更新已被取消。强烈建议你完成更新，以避免不一致的系统软件版本。" #: Source/Core/DiscIO/VolumeVerifier.cpp:684 msgid "The update partition does not contain the IOS used by this title." msgstr "更新分区未包含此游戏使用的 IOS。" #: Source/Core/DiscIO/VolumeVerifier.cpp:457 msgid "The update partition is missing." msgstr "缺少更新分区。" #: Source/Core/DiscIO/VolumeVerifier.cpp:492 msgid "The update partition is not at its normal position." msgstr "更新分区未处于正常位置。" #: Source/Core/DolphinQt/MenuBar.cpp:1157 msgid "" "The user-accessible part of your NAND contains %1 blocks (%2 KiB) of data, " "out of an allowed maximum of %3 blocks (%4 KiB)." msgstr "" "NAND 中用户可访问分区包含 %1 个数据块(%2 KiB)，而允许的最大数据块数为 %3 (%4 " "KiB)。" #: Source/Core/DiscIO/VolumeVerifier.cpp:643 msgid "The {0} partition does not have a valid file system." msgstr "分区 {0} 无有效的文件系统。" #: Source/Core/DiscIO/VolumeVerifier.cpp:572 msgid "The {0} partition does not seem to contain valid data." msgstr "分区 {0} 似乎未包含有效数据。" #: Source/Core/DiscIO/VolumeVerifier.cpp:594 msgid "The {0} partition is not correctly signed." msgstr "分区 {0} 未正确签名。" #: Source/Core/DiscIO/VolumeVerifier.cpp:539 msgid "The {0} partition is not properly aligned." msgstr "分区 {0} 未正确对齐。" #: Source/Core/DiscIO/VolumeVerifier.cpp:445 msgid "There are too many partitions in the first partition table." msgstr "第一个分区表中的分区太多。" #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:808 msgid "" "There are unsaved changes in \"%1\".\n" "\n" "Do you want to save before closing?" msgstr "" "\"%1\" 中有未保存的更改。\n" "\n" "您要在关闭前保存吗？" #: Source/Core/Core/State.cpp:1034 msgid "There is nothing to undo!" msgstr "没有需要撤销的操作。" #: Source/Core/DolphinQt/GameList/GameList.cpp:495 msgid "There was an issue adding a shortcut to the desktop" msgstr "向桌面添加快捷方式时出现问题" #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:154 msgid "" "These settings override core Dolphin settings.\n" "Undetermined means the game uses Dolphin's setting." msgstr "" "这些设置将覆盖核心 Dolphin 设置。\n" "未决设置将使用 Dolphin 的设置。" #: Source/Core/DolphinQt/Config/CheatCodeEditor.cpp:167 msgid "" "This Action Replay code contains both encrypted and unencrypted lines; you " "should check that you have entered it correctly.\n" "\n" "Do you want to discard all unencrypted lines?" msgstr "" "此 Action Replay 代码同时含有加密和未加密的行；你应该检查是否已正确输入。\n" "\n" "你是否要丢弃所有未加密的行？" #: Source/Core/DolphinQt/Config/CheatCodeEditor.cpp:250 msgid "This Gecko code doesn't contain any lines." msgstr "此 Gecko 代码不包含任何行。" #. i18n: You may want to leave the term "ERROR #002" untranslated, #. since the emulated software always displays it in English. #: Source/Core/DiscIO/VolumeVerifier.cpp:941 msgid "" "This Korean title is set to use an IOS that typically isn't used on Korean " "consoles. This is likely to lead to ERROR #002." msgstr "" "此韩语游戏设置为使用通常不在韩版主机上用到的 IOS。 这很可能导致错误 #002。" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:100 msgid "This Skylander type can't be modified yet!" msgstr "此 Skylander 类型现在还无法修改！" #: Source/Core/DolphinQt/Settings/USBDeviceAddToWhitelistDialog.cpp:152 msgid "This USB device is already whitelisted." msgstr "此 USB 设备已列入白名单。" #: Source/Core/Core/ConfigManager.cpp:286 msgid "This WAD is not bootable." msgstr "无法启动该 WAD" #: Source/Core/Core/ConfigManager.cpp:281 msgid "This WAD is not valid." msgstr "此 WAD 无效。" #: Source/Core/Core/ActionReplay.cpp:908 msgid "" "This action replay simulator does not support codes that modify Action " "Replay itself." msgstr "此Action Replay模拟器不支持修改Action Replay本身的代码。" #: Source/Core/Common/x64CPUDetect.cpp:83 msgid "" "This build of Dolphin is not natively compiled for your CPU.\n" "Please run the ARM64 build of Dolphin for a better experience." msgstr "" "此 Dolphin 构建版本没有对你的 CPU 原生编译。\n" "请运行 Dolphin 的 ARM64 版本以获得更好的体验。" #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:267 #: Source/Core/DolphinQt/GameList/GameList.cpp:835 msgid "This cannot be undone!" msgstr "不能被撤销！" #: Source/Core/DiscIO/VolumeVerifier.cpp:828 msgid "This debug disc image has the size of a retail disc image." msgstr "此调试版光盘镜像和零售版光盘镜像大小一样。" #: Source/Core/DiscIO/VolumeVerifier.cpp:851 msgid "This disc image has an unusual size." msgstr "此光盘镜像大小异常。" #: Source/Core/DiscIO/VolumeVerifier.cpp:845 msgid "" "This disc image has an unusual size. This will likely make the emulated " "loading times longer. You will likely be unable to share input recordings " "and use NetPlay with anyone who is using a good dump." msgstr "" "此光盘镜像大小异常。这可能会使模拟的加载时间更长。你将无法与正在使用正确转储" "的其他人共享输入录制和使用联机功能。" #: Source/Core/DiscIO/VolumeVerifier.cpp:1013 msgid "" "This disc image is in the NKit format. It is not a good dump in its current " "form, but it might become a good dump if converted back. The CRC32 of this " "file might match the CRC32 of a good dump even though the files are not " "identical." msgstr "" "此光盘镜像采用 NKit 格式。这种格式并不是一个正确的转储，但如果转换回去可能会" "变成正确转储。即使文件不相同，此文件的 CRC32 也可能与正确转储的 CRC32 匹配。" #: Source/Core/DiscIO/VolumeVerifier.cpp:801 msgid "" "This disc image is too small and lacks some data. If your dumping program " "saved the disc image as several parts, you need to merge them into one file." msgstr "" "此光盘镜像太小并且缺少一些数据。如果你的转储程序将光盘镜像保存为多个部分，则" "需要将其合并为一个文件。" #: Source/Core/DiscIO/VolumeVerifier.cpp:798 msgid "" "This disc image is too small and lacks some data. The problem is most likely " "that this is a dual-layer disc that has been dumped as a single-layer disc." msgstr "" "此光盘镜像太小并且缺少一些数据。问题原因很可能这是一个双层光盘但被转储为单层" "光盘。" #: Source/Core/VideoCommon/CommandProcessor.cpp:715 msgid "" "This error is usually caused by the emulated GPU desyncing with the emulated " "CPU, but your current settings make this unlikely to happen. If this error " "is stopping the game from working, please report it to the developers." msgstr "" "此错误通常是由模拟 GPU 与模拟 CPU 不同步引起的，但您当前的设置使这种情况不太" "可能发生。如果此错误导致游戏无法运行，请向开发人员报告。" #: Source/Core/VideoCommon/CommandProcessor.cpp:708 msgid "" "This error is usually caused by the emulated GPU desyncing with the emulated " "CPU. Turn off the \"Dual Core\" setting to avoid this." msgstr "" "此错误通常是由于模拟 GPU 与模拟 CPU 不同步引起的。关闭“双核”设置以避免这种情" "况。" #: Source/Core/DolphinQt/Config/HardcoreWarningWidget.cpp:38 msgid "This feature is disabled in hardcore mode." msgstr "此功能在硬核模式下被禁用。" #: Source/Core/DiscIO/NANDImporter.cpp:116 msgid "This file does not contain a valid Wii filesystem." msgstr "此文件未包含有效的 Wii 文件系统。" #: Source/Core/DiscIO/NANDImporter.cpp:55 msgid "This file does not look like a BootMii NAND backup." msgstr "此文件似乎不是一个 BootMii NAND 备份。" #: Source/Core/DiscIO/VolumeVerifier.cpp:773 msgid "" "This game has been hacked to fit on a single-layer DVD. Some content such as " "pre-rendered videos, extra languages or entire game modes will be broken. " "This problem generally only exists in illegal copies of games." msgstr "" "此游戏已被篡改为适合单层 DVD。某些内容如预渲染视频、其他语言或整个游戏模式都" "会被破坏。这个问题通常只存在于非法的游戏副本中。" #: Source/Core/VideoCommon/VideoBackendBase.cpp:195 msgid "" "This game requires bounding box emulation to run properly but your graphics " "card or its drivers do not support it. As a result you will experience bugs " "or freezes while running this game." msgstr "" "这个游戏需要边框模拟才能正常运行，但你的显卡或其驱动程序不支持。 因此在运行此" "游戏时将会发生错误或画面冻结。" #: Source/Core/DiscIO/VolumeVerifier.cpp:1408 msgid "This is a bad dump." msgstr "这是一个错误的转储。" #: Source/Core/DiscIO/VolumeVerifier.cpp:1401 msgid "" "This is a bad dump. This doesn't necessarily mean that the game won't run " "correctly." msgstr "这是一个错误的转储。但并不一定表示游戏无法正常运行。" #: Source/Core/DiscIO/VolumeVerifier.cpp:1368 msgid "" "This is a good dump according to Redump.org, but Dolphin has found problems. " "This might be a bug in Dolphin." msgstr "" "依据 Redump.org，这是一个正确的转储，但 Dolphin 发现了问题。这可能是 Dolphin " "中的错误。" #: Source/Core/DiscIO/VolumeVerifier.cpp:1363 msgid "This is a good dump." msgstr "这是一个正确的转储。" #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:302 msgid "This session requires a password:" msgstr "此会话需要密码：" #: Source/Core/DolphinQt/Settings/AdvancedPane.cpp:184 msgid "" "This setting allows you to set a custom real time clock (RTC) separate from " "your current system time.\n" "\n" "If unsure, leave this unchecked." msgstr "" "该设定可以让你设置一个与当前系统时间隔离的自定义实时时钟(RTC)。\n" "\n" "如无法确定，请不要选中此项。" #: Source/Core/DolphinQt/AboutDialog.cpp:66 msgid "This software should not be used to play games you do not legally own." msgstr "该软件不能用于运行你非法持有的游戏。" #: Source/Core/Core/ConfigManager.cpp:304 msgid "This title cannot be booted." msgstr "无法启动该软件。" #: Source/Core/DiscIO/VolumeVerifier.cpp:949 msgid "This title is set to use an invalid IOS." msgstr "此游戏设置为使用无效的 IOS。" #. i18n: This is "common" as in "shared", not the opposite of "uncommon" #: Source/Core/DiscIO/VolumeVerifier.cpp:963 msgid "This title is set to use an invalid common key." msgstr "此游戏设置为使用无效的公用密钥。" #: Source/Core/Core/HW/DSPHLE/UCodes/UCodes.cpp:322 msgid "" "This title might be incompatible with DSP HLE emulation. Try using LLE if " "this is homebrew.\n" "\n" "DSPHLE: Unknown ucode (CRC = {0:08x}) - forcing AX." msgstr "" "该游戏可能与 DSP HLE 模拟不兼容，如果这是自制软件请尝试使用 LLE。\n" "\n" "DSP HLE: 未知 Ucode (CRC = {0:08x}) - 强制 AX." #: Source/Core/Core/HW/DSPHLE/UCodes/UCodes.cpp:313 msgid "" "This title might be incompatible with DSP HLE emulation. Try using LLE if " "this is homebrew.\n" "\n" "Unknown ucode (CRC = {0:08x}) - forcing AXWii." msgstr "" "该游戏可能与 DSP HLE 模拟不兼容，如果这是自制软件请尝试使用 LLE。\n" "\n" "未知 Ucode (CRC = {0:08x}) - 强制 AXWii." #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:139 msgid "" "This value is added to the convergence value set in the graphics " "configuration." msgstr "该数值将与图像设置中设定的会聚值相加。" #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:137 msgid "" "This value is multiplied with the depth set in the graphics configuration." msgstr "该数值将与图像设置中设定的深度值相乘。" #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:161 msgid "" "This will limit the speed of chunked uploading per client, which is used for " "save sync." msgstr "这将限制每个客户端用于存档同步的数据块上传速度。" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:177 msgid "" "This will sync additional graphics settings, and force everyone to the same " "internal resolution.\n" "May prevent desync in some games that use EFB reads. Please ensure everyone " "uses the same video backend." msgstr "" "这将同步附加的图形设置，并强制所有人使用相同的内部分辨率。\n" "可以防止在某些使用 EFB 读取的游戏中出现不同步。请确保所有人都使用相同的视频后" "端。" #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:143 msgid "Thread context" msgstr "线程上下文" #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:24 msgid "Threads" msgstr "线程" #: Source/Core/InputCommon/ControllerEmu/ControlGroup/MixedTriggers.cpp:26 msgid "Threshold" msgstr "阈值" #: Source/Core/UICommon/UICommon.cpp:546 msgid "TiB" msgstr "TiB" #: Source/Core/Core/HW/WiimoteEmu/Extension/Nunchuk.cpp:55 #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.cpp:230 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtensionMotionSimulation.cpp:32 msgid "Tilt" msgstr "倾斜" #. i18n: Refers to the "Calibration" setting of gyroscope input. #: Source/Core/InputCommon/ControllerEmu/ControlGroup/IMUGyroscope.cpp:49 msgid "Time period of stable input to trigger calibration. (zero to disable)" msgstr "触发校准的稳定输入时间段。(0 为禁用)" #: Source/Core/DolphinQt/Debugger/RegisterWidget.cpp:293 msgid "Timed Out" msgstr "超时" #: Source/Core/DolphinQt/GameList/GameList.cpp:1002 #: Source/Core/DolphinQt/GameList/GameListModel.cpp:214 #: Source/Core/DolphinQt/GCMemcardManager.cpp:154 #: Source/Core/DolphinQt/MenuBar.cpp:654 msgid "Title" msgstr "标题" #: Source/Core/DolphinQt/Debugger/BreakpointDialog.cpp:309 msgid "To" msgstr "至" #: Source/Core/DolphinQt/Debugger/BreakpointDialog.cpp:132 #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:98 #: Source/Core/DolphinQt/FIFO/FIFOPlayerWindow.cpp:113 msgid "To:" msgstr "至：" #: Source/Core/DolphinQt/MenuBar.cpp:331 msgid "Toggle &Fullscreen" msgstr "切换全屏(&F)" #: Source/Core/Core/HotkeyManager.cpp:125 msgid "Toggle 3D Anaglyph" msgstr "切换色差 3D" #: Source/Core/Core/HotkeyManager.cpp:123 msgid "Toggle 3D Side-by-Side" msgstr "切换左右 3D" #: Source/Core/Core/HotkeyManager.cpp:124 msgid "Toggle 3D Top-Bottom" msgstr "切换上下 3D" #: Source/Core/DolphinQt/Config/LogConfigWidget.cpp:62 msgid "Toggle All Log Types" msgstr "全选/反选所有日志类型" #: Source/Core/Core/HotkeyManager.cpp:107 msgid "Toggle Aspect Ratio" msgstr "切换长宽比" #: Source/Core/Core/HotkeyManager.cpp:76 #: Source/Core/DolphinQt/Debugger/MemoryViewWidget.cpp:906 msgid "Toggle Breakpoint" msgstr "切换断点" #: Source/Core/Core/HotkeyManager.cpp:106 msgid "Toggle Crop" msgstr "切换画面边界" #: Source/Core/Core/HotkeyManager.cpp:114 msgid "Toggle Custom Textures" msgstr "切换自定义纹理" #: Source/Core/Core/HotkeyManager.cpp:109 msgid "Toggle EFB Copies" msgstr "切换 EFB 副本" #: Source/Core/Core/HotkeyManager.cpp:112 msgid "Toggle Fog" msgstr "切换雾" #: Source/Core/Core/HotkeyManager.cpp:34 msgid "Toggle Fullscreen" msgstr "切换全屏" #: Source/Core/Core/HotkeyManager.cpp:31 msgid "Toggle Pause" msgstr "切换暂停" #: Source/Core/Core/HotkeyManager.cpp:86 msgid "Toggle SD Card" msgstr "切换 SD 卡" #: Source/Core/Core/HotkeyManager.cpp:108 msgid "Toggle Skip EFB Access" msgstr "切换跳过 EFB 访问" #: Source/Core/Core/HotkeyManager.cpp:113 msgid "Toggle Texture Dumping" msgstr "切换纹理转储" #: Source/Core/Core/HotkeyManager.cpp:87 msgid "Toggle USB Keyboard" msgstr "切换 USB 键盘" #: Source/Core/Core/HotkeyManager.cpp:110 msgid "Toggle XFB Copies" msgstr "切换 XFB 副本" #: Source/Core/Core/HotkeyManager.cpp:111 msgid "Toggle XFB Immediate Mode" msgstr "切换 XFB 立即模式" #: Source/Core/InputCommon/ControlReference/ExpressionParser.cpp:958 msgid "Tokenizing failed." msgstr "标记化失败。" #: Source/Core/DolphinQt/ToolBar.cpp:28 msgid "Toolbar" msgstr "工具栏" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:356 msgid "Top" msgstr "顶部" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:210 msgid "Top-and-Bottom" msgstr "上下" #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:90 #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:264 #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:498 msgid "Total Hits" msgstr "总命中数" #. i18n: Refers to an amount of rotational movement about the "pitch" axis. #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Cursor.cpp:55 msgid "Total Pitch" msgstr "总俯仰" #. i18n: Refers to an amount of rotational movement about the "yaw" axis. #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Cursor.cpp:46 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/IMUCursor.cpp:35 msgid "Total Yaw" msgstr "总偏转" #. i18n: Refers to emulated wii remote movements. #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Cursor.cpp:59 msgid "Total rotation about the pitch axis." msgstr "围绕俯仰轴的总旋转量。" #. i18n: Refers to emulated wii remote movements. #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Cursor.cpp:50 msgid "Total rotation about the yaw axis." msgstr "围绕偏转轴的总旋转量。" #. i18n: Refering to emulated wii remote movement. #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Force.cpp:145 msgid "Total travel distance." msgstr "总共移动距离。" #: Source/Core/Core/HW/WiimoteEmu/Extension/DrawsomeTablet.cpp:32 #: Source/Core/Core/HW/WiimoteEmu/Extension/UDrawTablet.cpp:51 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:195 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:210 msgid "Touch" msgstr "接触" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:119 msgid "Toy code:" msgstr "玩具代码：" #: Source/Core/DiscIO/Enums.cpp:101 #: Source/Core/DolphinQt/Settings/WiiPane.cpp:176 msgid "Traditional Chinese" msgstr "繁体中文" #. i18n: One of the figure types in the Skylanders games. #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:433 msgid "Trap" msgstr "陷阱" #. i18n: One of the figure types in the Skylanders games. #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:422 msgid "Trap Master" msgstr "陷阱大师" #. i18n: Figures for the game Skylanders: Trap Team. The game has the same title in all countries #. it was released in. It was not released in Japan. #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:284 msgid "Trap Team" msgstr "陷阱小队" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:993 #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:997 msgid "Traversal Error" msgstr "穿透错误" #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:194 msgid "Traversal Server" msgstr "穿透服务器" #: Source/Core/Core/NetPlayClient.cpp:1978 msgid "Traversal server timed out connecting to the host" msgstr "穿透服务器与主机连接超时" #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:53 msgid "" "Tries to translate branches ahead of time, improving performance in most " "cases. Defaults to True" msgstr "尝试提前翻译分支，多数情况下可提高性能。默认值为 True" #: Source/Core/Core/HW/EXI/EXI_Device.h:101 msgid "Triforce AM Baseboard" msgstr "Triforce AM 基板" #: Source/Core/Core/HW/GCPadEmu.h:60 #: Source/Core/Core/HW/WiimoteEmu/Extension/Classic.h:222 #: Source/Core/DolphinQt/Config/Mapping/GCPadEmu.cpp:33 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:63 #: Source/Core/DolphinQt/TAS/GCTASInputWindow.cpp:38 #: Source/Core/DolphinQt/TAS/WiiTASInputWindow.cpp:212 msgid "Triggers" msgstr "扳机" #. i18n: One of the figure types in the Skylanders games. #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:428 msgid "Trophy" msgstr "奖杯" #: Source/Core/DolphinQt/Config/NewPatchDialog.cpp:127 #: Source/Core/DolphinQt/Debugger/BreakpointWidget.cpp:167 #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:330 #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:352 msgid "Type" msgstr "类型" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:203 msgid "Type-based Alignment" msgstr "基于类型对齐" #: Source/Core/DolphinQt/CheatSearchFactoryWidget.cpp:48 msgid "Typical GameCube/Wii Address Space" msgstr "典型 GameCube/Wii 地址空间" #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:292 msgid "UNKNOWN" msgstr "未知" #: Source/Core/DiscIO/Enums.cpp:30 msgid "USA" msgstr "美国" #: Source/Core/DolphinQt/Config/Mapping/HotkeyUSBEmu.cpp:21 msgid "USB Device Emulation" msgstr "USB 设备模拟" #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:456 msgid "USB Emulation" msgstr "USB 模拟" #: Source/Core/Core/HotkeyManager.cpp:361 msgid "USB Emulation Devices" msgstr "USB 模拟设备" #: Source/Core/Core/HW/EXI/EXI_Device.h:102 msgid "USB Gecko" msgstr "USB Gecko" #: Source/Core/DolphinQt/Settings/USBDeviceAddToWhitelistDialog.cpp:131 #: Source/Core/DolphinQt/Settings/USBDeviceAddToWhitelistDialog.cpp:138 #: Source/Core/DolphinQt/Settings/USBDeviceAddToWhitelistDialog.cpp:151 msgid "USB Whitelist Error" msgstr "USB 白名单错误" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:272 msgid "" "Ubershaders are never used. Stuttering will occur during shader compilation, " "but GPU demands are low.

Recommended for low-end hardware. " "

If unsure, select this mode." msgstr "" "不使用超着色器。在着色器编译期间将产生卡顿，但对 GPU 要求低。

推荐用于" "低端硬件。

如无法确定，请选择此模式。" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:277 msgid "" "Ubershaders will always be used. Provides a near stutter-free experience at " "the cost of very high GPU performance requirements." "

Don't use this unless you encountered stuttering " "with Hybrid Ubershaders and have a very powerful GPU." msgstr "" "一直使用超着色器。以极高 GPU 性能需求为代价提供近乎无卡顿的体验。" "

除非使用混合超着色器遇到卡顿并且拥有非常强大的 " "GPU，否则不要使用此选项。" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:282 msgid "" "Ubershaders will be used to prevent stuttering during shader compilation, " "but specialized shaders will be used when they will not cause stuttering." "

In the best case it eliminates shader compilation stuttering while " "having minimal performance impact, but results depend on video driver " "behavior." msgstr "" "在着色器编译期间使用超着色器以避免卡顿，当不会产生卡顿时使用专用着色器。" "

在理想情况下将在消除着色器编译卡顿的同时尽可能减小性能影响，但效果因" "视频驱动的行为而异。" #: Source/Core/DolphinQt/MenuBar.cpp:1370 msgid "Unable to auto-detect RSO module" msgstr "无法自动检测 RSO 模块" #: Source/Core/UICommon/AutoUpdate.cpp:204 msgid "Unable to contact update server." msgstr "无法连接更新服务器。" #: Source/Core/UICommon/AutoUpdate.cpp:276 msgid "Unable to create updater copy." msgstr "无法创建更新程序副本。" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:96 msgid "Unable to modify Skylander!" msgstr "无法修改 Skylander！" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:704 msgid "Unable to open file." msgstr "无法打开文件。" #: Source/Core/DolphinQt/Config/CheatCodeEditor.cpp:150 msgid "" "Unable to parse line %1 of the entered AR code as a valid encrypted or " "decrypted code. Make sure you typed it correctly.\n" "\n" "Would you like to ignore this line and continue parsing?" msgstr "" "不能将所输入 AR 代码的第 %1 行作为有效的加密或解密代码进行分析。请确保代码输" "入正确。\n" "\n" "是否要忽略此行继续分析？" #: Source/Core/DolphinQt/Config/CheatCodeEditor.cpp:237 msgid "" "Unable to parse line %1 of the entered Gecko code as a valid code. Make sure " "you typed it correctly.\n" "\n" "Would you like to ignore this line and continue parsing?" msgstr "" "不能将所输入 AR 代码的第 %1 行作为有效代码进行分析。请确保代码输入正确。\n" "\n" "是否要忽略此行继续分析？" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:712 msgid "Unable to read file." msgstr "无法读取文件。" #: Source/Core/UICommon/AutoUpdate.cpp:281 msgid "Unable to set permissions on updater copy." msgstr "无法设置更新程序副本的权限。" #: Source/Core/DiscIO/NANDImporter.cpp:297 msgid "Unable to write to file {0}" msgstr "无法写入文件 {0}" #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:97 msgid "Unbound" msgstr "未绑定" #: Source/Core/DolphinQt/ConvertDialog.cpp:345 msgid "Uncompressed GC/Wii images (*.iso *.gcm)" msgstr "未压缩的 GC/Wii 镜像 (*.iso *.gcm)" #. i18n: One of the elements in the Skylanders games. Japanese: アンデッド. For official #. translations in other languages, check the SuperChargers manual at #. https://support.activision.com/manuals #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:362 msgid "Undead" msgstr "亡灵" #: Source/Core/Core/HotkeyManager.cpp:178 Source/Core/DolphinQt/MenuBar.cpp:353 msgid "Undo Load State" msgstr "撤销载入状态" #: Source/Core/Core/HotkeyManager.cpp:179 Source/Core/DolphinQt/MenuBar.cpp:370 msgid "Undo Save State" msgstr "撤销保存状态" #: Source/Core/DolphinQt/ResourcePackManager.cpp:320 msgid "Uninstall" msgstr "卸载" #: Source/Core/DolphinQt/GameList/GameList.cpp:445 msgid "Uninstall from the NAND" msgstr "从 NAND 中卸载" #: Source/Core/DolphinQt/GameList/GameList.cpp:648 msgid "" "Uninstalling the WAD will remove the currently installed version of this " "title from the NAND without deleting its save data. Continue?" msgstr "" "卸载 WAD 会将该游戏的当前已安装版本从 NAND 中移除，而不会删除其存档。是否继" "续？" #: Source/Core/DolphinQt/MenuBar.cpp:295 msgid "United States" msgstr "美国" #: Source/Core/Core/State.cpp:637 Source/Core/DiscIO/Enums.cpp:63 #: Source/Core/DiscIO/Enums.cpp:107 Source/Core/DiscIO/Enums.cpp:133 #: Source/Core/DolphinQt/Config/InfoWidget.cpp:85 #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:45 #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:68 #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:126 #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:130 #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:759 msgid "Unknown" msgstr "未知" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:56 #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:865 msgid "Unknown (Id:%1 Var:%2)" msgstr "未知 (Id:%1 Var:%2)" #: Source/Core/Core/HW/DVD/DVDInterface.cpp:1175 msgid "Unknown DVD command {0:08x} - fatal error" msgstr "未知 DVD 命令 {0:08x} - 致命错误" #: Source/Core/Core/NetPlayClient.cpp:1334 msgid "Unknown SYNC_CODES message received with id: {0}" msgstr "收到未知的 同步_代码 消息，ID：{0}" #: Source/Core/Core/NetPlayServer.cpp:1239 msgid "" "Unknown SYNC_GECKO_CODES message with id:{0} received from player:{1} " "Kicking player!" msgstr "收到未知的 同步_GECKO_代码 消息，ID：{0} 来自玩家：{1} 剔除玩家！" #: Source/Core/Core/NetPlayClient.cpp:1035 msgid "Unknown SYNC_SAVE_DATA message received with id: {0}" msgstr "收到未知的 同步_存档_数据 消息，ID：{0}" #: Source/Core/Core/NetPlayServer.cpp:1182 msgid "" "Unknown SYNC_SAVE_DATA message with id:{0} received from player:{1} Kicking " "player!" msgstr "收到未知的 同步_存档_数据 消息，ID：{0} 来自玩家：{1} 剔除玩家！" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderModifyDialog.cpp:89 msgid "Unknown Skylander type!" msgstr "未知的 Skylander 类型！" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:132 msgid "Unknown address space" msgstr "未知地址空间" #: Source/Core/DolphinQt/ResourcePackManager.cpp:120 msgid "Unknown author" msgstr "未知作者" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:170 msgid "Unknown data type" msgstr "未知数据类型" #: Source/Core/DiscIO/VolumeVerifier.cpp:357 msgid "Unknown disc" msgstr "未知光盘" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:380 msgid "Unknown error occurred." msgstr "发生未知错误。" #: Source/Core/Core/NetPlayClient.cpp:1987 msgid "Unknown error {0:x}" msgstr "未知错误 {0:x}" #: Source/Core/DolphinQt/GCMemcardManager.cpp:869 msgid "Unknown error." msgstr "未知错误。" #: Source/Core/Core/NetPlayClient.cpp:480 msgid "Unknown message received with id : {0}" msgstr "收到未知的消息，ID：{0}" #: Source/Core/Core/NetPlayServer.cpp:1247 msgid "Unknown message with id:{0} received from player:{1} Kicking player!" msgstr "收到未知的消息，ID：{0} 来自玩家：{1} 剔除玩家！" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:549 #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:632 msgid "Unknown(%1 %2).sky" msgstr "Unknown(%1 %2).sky" #: Source/Core/DolphinQt/InfinityBase/InfinityBaseWindow.cpp:277 msgid "Unknown(%1).bin" msgstr "Unknown(%1).bin" #: Source/Core/DolphinQt/Settings/GeneralPane.cpp:170 msgid "Unlimited" msgstr "无限制" #: Source/Core/Core/HotkeyManager.cpp:186 msgid "Unload ROM" msgstr "卸载 ROM" #: Source/Core/Core/HotkeyManager.cpp:37 msgid "Unlock Cursor" msgstr "解锁光标" #: Source/Core/DolphinQt/Achievements/AchievementProgressWidget.cpp:160 msgid "Unlocked" msgstr "已解锁" #: Source/Core/DolphinQt/Achievements/AchievementProgressWidget.cpp:149 msgid "Unlocked %1 times this session" msgstr "本次会话期间解锁 %1 次" #: Source/Core/DolphinQt/Achievements/AchievementProgressWidget.cpp:158 msgid "Unlocked (Casual)" msgstr "已解锁 (临时)" #: Source/Core/DolphinQt/Achievements/AchievementProgressWidget.cpp:151 msgid "Unlocked this session" msgstr "本次会话期间解锁" #: Source/Core/DiscIO/FileBlob.cpp:87 msgid "Unpacking" msgstr "正在解包" #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:309 #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:807 msgid "Unsaved Changes" msgstr "未保存的更改" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:141 #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:192 msgid "Unsigned 16" msgstr "无符号 16" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:142 #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:193 msgid "Unsigned 32" msgstr "无符号 32" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:140 #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:191 msgid "Unsigned 8" msgstr "无符号 8" #: Source/Core/DolphinQt/Debugger/RegisterWidget.cpp:151 msgid "Unsigned Integer" msgstr "无符号整数" #: Source/Core/Core/FreeLookManager.cpp:88 #: Source/Core/Core/HW/WiimoteEmu/Extension/Guitar.cpp:79 #: Source/Core/Core/HW/WiimoteEmu/Extension/Shinkansen.cpp:34 #: Source/Core/DolphinQt/ResourcePackManager.cpp:43 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Force.cpp:20 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/IMUAccelerometer.cpp:18 #: Source/Core/InputCommon/ControllerEmu/ControllerEmu.h:24 msgid "Up" msgstr "上" #: Source/Core/DolphinQt/Debugger/RegisterWidget.cpp:282 #: Source/Core/DolphinQt/Debugger/WatchWidget.cpp:369 msgid "Update" msgstr "更新" #: Source/Core/DolphinQt/Config/FilesystemWidget.cpp:148 msgid "Update Partition (%1)" msgstr "更新分区 (%1)" #: Source/Core/DolphinQt/Updater.cpp:77 msgid "Update after closing Dolphin" msgstr "关闭 Dolphin 后更新" #: Source/Core/DolphinQt/Updater.cpp:60 msgid "Update available" msgstr "更新可用" #: Source/Core/DolphinQt/WiiUpdate.cpp:59 msgid "Update cancelled" msgstr "更新已取消" #: Source/Core/DolphinQt/WiiUpdate.cpp:33 #: Source/Core/DolphinQt/WiiUpdate.cpp:38 msgid "Update completed" msgstr "更新已完成" #: Source/Core/DolphinQt/WiiUpdate.cpp:43 #: Source/Core/DolphinQt/WiiUpdate.cpp:48 #: Source/Core/DolphinQt/WiiUpdate.cpp:53 #: Source/Core/DolphinQt/WiiUpdate.cpp:65 #: Source/Core/DolphinQt/WiiUpdate.cpp:72 msgid "Update failed" msgstr "更新失败" #: Source/Core/DolphinQt/WiiUpdate.cpp:98 msgid "Updating" msgstr "正在更新" #: Source/Core/DolphinQt/WiiUpdate.cpp:124 msgid "" "Updating title %1...\n" "This can take a while." msgstr "" "正在更新软件 %1...\n" "这可能需要一段时间。" #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.cpp:266 msgid "Upright Hold" msgstr "保持竖握" #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.cpp:263 msgid "Upright Toggle" msgstr "切换竖握" #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.cpp:305 msgid "Upright Wii Remote" msgstr "竖握 Wii 遥控器" #: Source/Core/DolphinQt/Settings/GeneralPane.cpp:232 msgid "Usage Statistics Reporting Settings" msgstr "使用情况统计报告设置" #: Source/Core/DolphinQt/Settings/BroadbandAdapterSettingsDialog.cpp:55 msgid "Use 8.8.8.8 for normal DNS, else enter your custom one" msgstr "使用 8.8.8.8 作为通用 DNS，或输入你的自定义设置" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:165 msgid "Use All Wii Save Data" msgstr "使用所有 Wii 存档数据" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:156 msgid "Use Built-In Database of Game Names" msgstr "使用内建数据库游戏名称" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:140 msgid "Use Lossless Codec (FFV1)" msgstr "使用无损编解码器 (FFV1)" #: Source/Core/DolphinQt/Config/Mapping/MappingWidget.cpp:168 msgid "Use Mouse Controlled Pointing" msgstr "使用鼠标控制指针" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:156 msgid "Use PAL60 Mode (EuRGB60)" msgstr "使用 PAL60 模式 (EuRGB60)" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:179 msgid "Use Panic Handlers" msgstr "使用警告程序" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:390 msgid "" "Use a manual implementation of texture sampling instead of the graphics " "backend's built-in functionality.

This setting can fix graphical " "issues in some games on certain GPUs, most commonly vertical lines on FMVs. " "In addition to this, enabling Manual Texture Sampling will allow for correct " "emulation of texture wrapping special cases (at 1x IR or when scaled EFB is " "disabled, and with custom textures disabled) and better emulates Level of " "Detail calculation.

This comes at the cost of potentially worse " "performance, especially at higher internal resolutions; additionally, " "Anisotropic Filtering is currently incompatible with Manual Texture Sampling." "

If unsure, leave this unchecked." msgstr "" "手动进行纹理采样而不是用图形后端的内置功能。

此设置可以修复部分 GPU 上" "一些游戏中的图形问题，最常见的是 FMV 视频中的垂直线。除此之外，启用手动纹理采" "样将允许在特殊情况下正确模拟纹理打包（在 1x 内部分辨率或禁用缩放 EFB 时，并禁" "用自定义纹理）并更好地模拟细节级别计算。

代价是性能消耗可能会更大，尤" "其是在更高的内部分辨率下；此外，各向异性过滤目前与手动纹理采样不兼容。" "

如无法确定，请不要选中此项。" #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:141 msgid "Use a single depth buffer for both eyes. Needed for a few games." msgstr "双眼使用同一个深度缓冲，部分游戏需要。" #: Source/Core/DolphinQt/CheatSearchFactoryWidget.cpp:64 msgid "Use memory mapper configuration at time of scan" msgstr "在扫描时使用内存映射器配置" #: Source/Core/DolphinQt/CheatSearchFactoryWidget.cpp:62 msgid "Use physical addresses" msgstr "使用物理地址" #: Source/Core/DolphinQt/CheatSearchFactoryWidget.cpp:60 msgid "Use virtual addresses when possible" msgstr "如可能则使用虚拟地址" #: Source/Core/DolphinQt/Debugger/CodeDiffDialog.cpp:538 msgid "" "Used to find functions based on when they should be running.\n" "Similar to Cheat Engine Ultimap.\n" "A symbol map must be loaded prior to use.\n" "Include/Exclude lists will persist on ending/restarting emulation.\n" "These lists will not persist on Dolphin close.\n" "\n" "'Start Recording': keeps track of what functions run.\n" "'Stop Recording': erases current recording without any change to the lists.\n" "'Code did not get executed': click while recording, will add recorded " "functions to an exclude list, then reset the recording list.\n" "'Code has been executed': click while recording, will add recorded function " "to an include list, then reset the recording list.\n" "\n" "After you use both exclude and include once, the exclude list will be " "subtracted from the include list and any includes left over will be " "displayed.\n" "You can continue to use 'Code did not get executed'/'Code has been executed' " "to narrow down the results.\n" "\n" "Saving will store the current list in Dolphin's Log folder (File -> Open " "User Folder)" msgstr "" "用于根据应该运行的时间来查找函数。\n" "类似于 Cheat Engine 终极映射。\n" "使用前必须加载符号映射。\n" "包含/排除列表将在结束/重启模拟时持续存在。\n" "这些列表在 Dolphin 关闭时不会保留。\n" "\n" "“开始录制”：跟踪运行的函数。\n" "“停止录制”：擦除当前录制内容但不更改到列表。\n" "“代码未执行”：录制时点击，则将录制的函数添加到排除列表，然后重置录制列表。\n" "“代码已执行”：录制时点击，则将录制的函数添加到包含列表，然后重置录制列表。\n" "\n" "在你同时使用排除和包含一次后，将从包含列表中减去排除列表，并显示任意剩余的包" "含数。\n" "你可以继续使用“代码未执行”/“代码已执行”来缩小结果范围。\n" "\n" "使用保存将当前列表存储到 Dolphin 的日志文件夹中 （文件 -> 打开用户文件夹）" #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:183 msgid "User Config" msgstr "用户配置" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:107 msgid "User Interface" msgstr "用户界面" #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:328 msgid "User Variables" msgstr "用户变量" #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:330 msgid "" "User defined variables usable in the control expression.\n" "You can use them to save or retrieve values between\n" "inputs and outputs of the same parent controller." msgstr "" "在控制表达式中使用的用户定义变量。\n" "你可以使用其来保存或检索同一个\n" "父控制器输入和输出之间的值。" #: Source/Core/DolphinQt/Achievements/AchievementSettingsWidget.cpp:54 msgid "Username" msgstr "用户名" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:274 msgid "" "Uses a less accurate algorithm to calculate depth values.

Causes " "issues in a few games, but can result in a decent speed increase depending " "on the game and/or GPU.

If unsure, leave this " "checked." msgstr "" "使用精确度较低的算法计算深度值。

在一些游戏中将导致问题但可能带来可观" "的提速，取决于游戏和/或 GPU。

如无法确定，请选中此" "项。" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:240 msgid "" "Uses the entire screen for rendering.

If disabled, a render window " "will be created instead.

If unsure, leave this " "unchecked." msgstr "" "使用整个屏幕进行渲染。

如果禁用，则会创建一个渲染窗口。" "

如无法确定，请不要选中此项。" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:247 msgid "" "Uses the main Dolphin window for rendering rather than a separate render " "window.

If unsure, leave this unchecked." msgstr "" "使用 Dolphin 主窗口而非单独的渲染窗口进行渲染。

如无" "法确定，请不要选中此项。" #: Source/Core/DolphinQt/AboutDialog.cpp:57 msgid "Using Qt %1" msgstr "使用 Qt %1" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:1044 msgid "Using TTL %1 for probe packet" msgstr "使用 TTL %1 探测数据包" #: Source/Core/DolphinQt/FIFO/FIFOAnalyzer.cpp:601 msgid "Usually used for light objects" msgstr "通常用于轻量对象" #. i18n: A normal matrix is a matrix used for transforming normal vectors. The word "normal" #. does not have its usual meaning here, but rather the meaning of "perpendicular to a #. surface". #: Source/Core/DolphinQt/FIFO/FIFOAnalyzer.cpp:594 msgid "Usually used for normal matrices" msgstr "通常用于法线矩阵" #: Source/Core/DolphinQt/FIFO/FIFOAnalyzer.cpp:588 msgid "Usually used for position matrices" msgstr "通常用于位置矩阵" #. i18n: Tex coord is short for texture coordinate #: Source/Core/DolphinQt/FIFO/FIFOAnalyzer.cpp:598 msgid "Usually used for tex coord matrices" msgstr "通常用于纹理坐标矩阵" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:98 msgid "Utility" msgstr "实用功能" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:73 msgid "V-Sync" msgstr "垂直同步" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:113 msgid "VBI Skip" msgstr "跳过垂直消隐中断" #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:125 msgid "Value" msgstr "值" #: Source/Core/DolphinQt/Debugger/CodeViewWidget.cpp:709 msgid "Value tracked to current instruction." msgstr "值跟踪到当前指令。" #: Source/Core/DolphinQt/Config/NewPatchDialog.cpp:157 msgid "Value:" msgstr "值：" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:619 msgid "Variant entered is invalid!" msgstr "输入的变量无效！" #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:589 msgid "Variant:" msgstr "变量：" #. i18n: One of the figure types in the Skylanders games. For official translations #. in other languages, check the SuperChargers manual at https://support.activision.com/manuals #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:431 msgid "Vehicle" msgstr "载具" #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Tilt.cpp:36 msgid "Velocity" msgstr "速度" #: Source/Core/DolphinQt/Config/LogConfigWidget.cpp:42 msgid "Verbosity" msgstr "详细" #: Source/Core/DolphinQt/Config/PropertiesDialog.cpp:85 msgid "Verify" msgstr "验证" #: Source/Core/DolphinQt/Config/VerifyWidget.cpp:101 msgid "Verify Integrity" msgstr "验证完整性" #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:412 msgid "Verify certificates" msgstr "验证证书" #: Source/Core/DolphinQt/Config/VerifyWidget.cpp:158 #: Source/Core/DolphinQt/Config/VerifyWidget.cpp:160 msgid "Verifying" msgstr "正在验证" #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:225 #: Source/Core/DolphinQt/ResourcePackManager.cpp:92 msgid "Version" msgstr "版本" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:110 msgid "Vertex Rounding" msgstr "顶点取整" #. i18n: FOV stands for "Field of view". #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.cpp:246 msgid "Vertical FOV" msgstr "垂直视野" #. i18n: Refers to a positional offset applied to an emulated wiimote. #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Cursor.cpp:39 msgid "Vertical Offset" msgstr "垂直偏移" #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:214 msgid "Video" msgstr "视频" #: Source/Core/DolphinQt/Debugger/RegisterWidget.cpp:141 #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:128 msgid "View &code" msgstr "查看代码(&C)" #: Source/Core/DolphinQt/Debugger/RegisterWidget.cpp:139 #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:127 msgid "View &memory" msgstr "查看内存(&M)" #: Source/Core/InputCommon/ControllerEmu/ControlGroup/ControlGroup.cpp:33 msgid "Virtual Notches" msgstr "虚拟接口" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:129 msgid "Virtual address space" msgstr "虚拟地址空间" #: Source/Core/Core/HotkeyManager.cpp:334 #: Source/Core/DolphinQt/Config/Mapping/HotkeyGBA.cpp:23 #: Source/Core/DolphinQt/Config/Mapping/HotkeyGeneral.cpp:24 #: Source/Core/DolphinQt/Settings/AudioPane.cpp:62 msgid "Volume" msgstr "音量" #: Source/Core/Core/HotkeyManager.cpp:42 Source/Core/Core/HotkeyManager.cpp:189 msgid "Volume Down" msgstr "减小音量" #: Source/Core/Core/HotkeyManager.cpp:44 Source/Core/Core/HotkeyManager.cpp:191 msgid "Volume Toggle Mute" msgstr "静音切换" #: Source/Core/Core/HotkeyManager.cpp:43 Source/Core/Core/HotkeyManager.cpp:190 msgid "Volume Up" msgstr "增大音量" #: Source/Core/VideoBackends/Vulkan/VideoBackend.h:18 msgid "Vulkan" msgstr "Vulkan" #: Source/Core/DolphinQt/MenuBar.cpp:1073 msgid "WAD files (*.wad)" msgstr "WAD 文件 (*.wad)" #: Source/Core/Core/WiiUtils.cpp:137 msgid "WAD installation failed: Could not create Wii Shop log files." msgstr "WAD 安装失败：无法创建 Wii 商店日志文件。" #: Source/Core/Core/WiiUtils.cpp:105 msgid "WAD installation failed: Could not finalise title import." msgstr "WAD 安装失败: 无法完成游戏导入。" #: Source/Core/Core/WiiUtils.cpp:95 msgid "WAD installation failed: Could not import content {0:08x}." msgstr "WAD 安装失败：无法导入内容 {0:08x}。" #: Source/Core/Core/WiiUtils.cpp:79 msgid "WAD installation failed: Could not initialise title import (error {0})." msgstr "WAD 安装失败：无法初始化游戏导入（错误 {0}）。" #: Source/Core/Core/WiiUtils.cpp:57 msgid "WAD installation failed: The selected file is not a valid WAD." msgstr "WAD 安装失败: 所选文件不是有效的 WAD。" #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:286 msgid "WAITING" msgstr "等待" #: Source/Core/DolphinQt/NANDRepairDialog.cpp:44 msgid "" "WARNING: Fixing this NAND requires the deletion of titles that have " "incomplete data on the NAND, including all associated save data. By " "continuing, the following title(s) will be removed:" msgstr "" "警告：修复此 NAND 需要删除 NAND 中数据不完整的游戏，包括所有相关的存档数据。" "若继续，以下游戏将被移除：" #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuMotionControlIMU.cpp:32 msgid "" "WARNING: The controls under Accelerometer and Gyroscope are designed to " "interface directly with motion sensor hardware. They are not intended for " "mapping traditional buttons, triggers or axes. You might need to configure " "alternate input sources before using these controls." msgstr "" "警告: 加速度计与陀螺仪组内的各控制项用于直接对接体感硬件，而非映射至传统按" "键、扳机或轴。使用这些控制项前可能需要先进行其他输入源的配置。" #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtensionMotionInput.cpp:35 msgid "" "WARNING: These controls are designed to interface directly with motion " "sensor hardware. They are not intended for mapping traditional buttons, " "triggers or axes. You might need to configure alternate input sources before " "using these controls." msgstr "" "警告: 这些控制项用于直接对接体感硬件，而非映射至传统按键、扳机或轴。使用这些" "控制项前可能需要先进行其他输入源的配置。" #: Source/Core/Core/Config/MainSettings.h:23 msgid "WASAPI (Exclusive Mode)" msgstr "WASAPI （独占模式）" #: Source/Core/DolphinQt/Settings/PathPane.cpp:231 msgid "WFS Path:" msgstr "WFS 路径：" #: Source/Core/DolphinQt/ConvertDialog.cpp:353 msgid "WIA GC/Wii images (*.wia)" msgstr "WIA GC/Wii 镜像 (*.wia)" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:232 #: Source/Core/DolphinQt/CheatSearchWidget.cpp:457 msgid "Waiting for first scan..." msgstr "等待第一次扫描..." #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:292 msgid "" "Waits for all shaders to finish compiling before starting a game. Enabling " "this option may reduce stuttering or hitching for a short time after the " "game is started, at the cost of a longer delay before the game starts. For " "systems with two or fewer cores, it is recommended to enable this option, as " "a large shader queue may reduce frame rates." "

Otherwise, if unsure, leave this unchecked." msgstr "" "等到所有着色器编译完成再开始游戏。启用此选项将会减少游戏开始后短时间的卡顿，" "但游戏开始前会有更长的延迟。对于有两个或以下核心的系统，较大的着色器队列将降" "低帧率，因而建议启用此选项。

其他情况下，如无法确" "定，请不要选中此项。" #: Source/Core/DolphinQt/Config/Graphics/GeneralWidget.cpp:260 msgid "" "Waits for vertical blanks in order to prevent tearing.

Decreases " "performance if emulation speed is below 100%.

If " "unsure, leave this unchecked." msgstr "" "等待场消隐期以防止撕裂。

模拟速度低于 100% 时会降低性能。" "

如无法确定，请不要选中此项。" #: Source/Core/DolphinQt/Config/Graphics/HacksWidget.cpp:239 msgid "" "Waits until the game synchronizes with the emulated GPU before writing the " "contents of EFB copies to RAM.

Reduces the overhead of EFB RAM " "copies, providing a performance boost in many games, at the risk of breaking " "those which do not safely synchronize with the emulated GPU." "

If unsure, leave this checked." msgstr "" "在将 EFB 副本的内容写入内存之前等待，直到游戏与模拟 GPU 同步。

可减少 " "EFB 内存副本占用，在许多游戏中有性能提升，但有可能导致某些无法与模拟 GPU 安全" "同步的风险。

如无法确定，请选中此项。" #: Source/Core/Common/MsgHandler.cpp:61 #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:124 #: Source/Core/DolphinQt/Config/GameConfigEdit.cpp:131 #: Source/Core/DolphinQt/Config/LogConfigWidget.cpp:47 #: Source/Core/DolphinQt/Config/WiimoteControllersWidget.cpp:217 #: Source/Core/DolphinQt/Config/WiimoteControllersWidget.cpp:233 #: Source/Core/DolphinQt/MenuBar.cpp:1523 #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:471 msgid "Warning" msgstr "警告" #: Source/Core/DolphinQt/Settings/GameCubePane.cpp:123 msgid "" "Warning: A GCI folder override path is currently configured for this slot. " "Adjusting the GCI path here will have no effect." msgstr "" "警告：当前为此插槽配置了 GCI 文件夹覆盖路径。在这里调整 GCI 路径不会有任何效" "果。" #: Source/Core/DolphinQt/TAS/TASInputWindow.cpp:54 msgid "" "Warning: Analog inputs may reset to controller values at random. In some " "cases this can be fixed by adding a deadzone." msgstr "" "警告：模拟输入可能会随机重置控制器值。在某些情况下可以通过添加死区来解决此问" "题。" #: Source/Core/Core/HW/GCMemcard/GCMemcardDirectory.cpp:612 msgid "" "Warning: Number of blocks indicated by the BAT ({0}) does not match that of " "the loaded file header ({1})" msgstr "警告：BAT 所标示的区块数 ({0}) 与已载入文件头中的 ({1}) 不匹配" #: Source/Core/Core/Movie.cpp:1073 msgid "" "Warning: You loaded a save that's after the end of the current movie. (byte " "{0} > {1}) (input {2} > {3}). You should load another save before " "continuing, or load this state with read-only mode off." msgstr "" "警告：您读取的存档在当前影片结束之后。(字节 {0} > {1}) (输入 {2} > {3}) 。您" "需要读取另一个存档方可继续，或关闭只读模式再读取此状态存档。" #: Source/Core/Core/Movie.cpp:1048 msgid "" "Warning: You loaded a save whose movie ends before the current frame in the " "save (byte {0} < {1}) (frame {2} < {3}). You should load another save before " "continuing." msgstr "" "警告：您读取的存档影片已结束在存档的当前帧之前 (字节 {0} < {1}) (帧 {2} < " "{3})。您需要读取另一个存档方可继续。" #: Source/Core/Core/Movie.cpp:1099 msgid "" "Warning: You loaded a save whose movie mismatches on byte {0} ({1:#x}). You " "should load another save before continuing, or load this state with read-" "only mode off. Otherwise you'll probably get a desync." msgstr "" "警告：您读取的存档在 {0} ({1:#x}) 字节处与影片不匹配。您需要读取另一个存档方" "可继续，或关闭只读模式再读取此状态存档。否则将可能发生不同步。" #: Source/Core/Core/Movie.cpp:1115 msgid "" "Warning: You loaded a save whose movie mismatches on frame {0}. You should " "load another save before continuing, or load this state with read-only mode " "off. Otherwise you'll probably get a desync.\n" "\n" "More information: The current movie is {1} frames long and the savestate's " "movie is {2} frames long.\n" "\n" "On frame {3}, the current movie presses:\n" "Start={4}, A={5}, B={6}, X={7}, Y={8}, Z={9}, DUp={10}, DDown={11}, " "DLeft={12}, DRight={13}, L={14}, R={15}, LT={16}, RT={17}, AnalogX={18}, " "AnalogY={19}, CX={20}, CY={21}, Connected={22}\n" "\n" "On frame {23}, the savestate's movie presses:\n" "Start={24}, A={25}, B={26}, X={27}, Y={28}, Z={29}, DUp={30}, DDown={31}, " "DLeft={32}, DRight={33}, L={34}, R={35}, LT={36}, RT={37}, AnalogX={38}, " "AnalogY={39}, CX={40}, CY={41}, Connected={42}" msgstr "" "警告：您所读取存档的第 {0} 帧与影片不匹配。您需要读取另一个存档方可继续，或关" "闭只读模式再读取此状态存档。否则将可能发生不同步。\n" "\n" "更多信息：当前影片长度为 {1} 帧而状态存档的影片长度为 {2} 帧。\n" "\n" "在第 {3} 帧，当前影片按下了：\n" "Start={4}, A={5}, B={6}, X={7}, Y={8}, Z={9}, DUp={10}, DDown={11}, " "DLeft={12}, DRight={13}, L={14}, R={15}, LT={16}, RT={17}, AnalogX={18}, " "AnalogY={19}, CX={20}, CY={21}, Connected={22}\n" "\n" "在第 {23} 帧，状态存档的影片按下了：\n" "Start={24}, A={25}, B={26}, X={27}, Y={28}, Z={29}, DUp={30}, DDown={31}, " "DLeft={32}, DRight={33}, L={34}, R={35}, LT={36}, RT={37}, AnalogX={38}, " "AnalogY={39}, CX={40}, CY={41}, Connected={42}" #. i18n: This kind of "watch" is used for watching emulated memory. #. It's not related to timekeeping devices. #: Source/Core/DolphinQt/Debugger/WatchWidget.cpp:31 msgid "Watch" msgstr "监视" #. i18n: One of the elements in the Skylanders games. Japanese: 水. For official translations #. in other languages, check the SuperChargers manual at https://support.activision.com/manuals #: Source/Core/DolphinQt/SkylanderPortal/SkylanderPortalWindow.cpp:343 msgid "Water" msgstr "水" #: Source/Core/DolphinQt/ResourcePackManager.cpp:92 msgid "Website" msgstr "网站" #: Source/Core/DolphinQt/GCMemcardCreateNewDialog.cpp:34 msgid "Western (Windows-1252)" msgstr "西方 (Windows-1252)" #: Source/Core/Core/HW/WiimoteEmu/Extension/Guitar.cpp:93 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:138 msgid "Whammy" msgstr "颤音" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:316 msgid "" "Whether to dump base game textures to User/Dump/Textures/<game_id>/. " "This includes arbitrary base textures if 'Arbitrary Mipmap Detection' is " "enabled in Enhancements.

If unsure, leave this " "checked." msgstr "" "是否将基本游戏纹理转储到 User/Dump/Textures/<game_id>/。如果在增强选项" "卡中启用了“特殊多级纹理检测”，则特殊基本纹理也会被转储。" "

如无法确定，请选中此项。" #: Source/Core/DolphinQt/Config/Graphics/AdvancedWidget.cpp:311 msgid "" "Whether to dump mipmapped game textures to User/Dump/Textures/<" "game_id>/. This includes arbitrary mipmapped textures if 'Arbitrary " "Mipmap Detection' is enabled in Enhancements.

If " "unsure, leave this checked." msgstr "" "是否将多级纹理的游戏材质转储到 User/Dump/Textures/<game_id>/。如果在增" "强选项卡中启用了“特殊多级纹理检测”，则特殊多级纹理也会被转储。" "

如无法确定，请选中此项。" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:340 msgid "Whitelisted USB Passthrough Devices" msgstr "USB 直通设备白名单" #: Source/Core/DolphinQt/Config/Graphics/EnhancementsWidget.cpp:153 msgid "Widescreen Hack" msgstr "宽屏修正" #: Source/Core/Core/HotkeyManager.cpp:341 #: Source/Core/DolphinQt/Config/Mapping/HotkeyWii.cpp:20 #: Source/Core/DolphinQt/Config/SettingsWindow.cpp:42 msgid "Wii" msgstr "Wii" #. i18n: "Wii Menu" (or System Menu) refers to the Wii's main menu, #. which is (usually) the first thing users see when a Wii console starts. #: Source/Core/Core/TitleDatabase.cpp:86 msgid "Wii Menu" msgstr "Wii 菜单" #: Source/Core/DolphinQt/Settings/PathPane.cpp:193 msgid "Wii NAND Root:" msgstr "Wii NAND 根目录：" #: Source/Core/Core/HW/Wiimote.cpp:100 msgid "Wii Remote" msgstr "Wii 遥控器" #: Source/Core/DolphinQt/Config/Mapping/HotkeyControllerProfile.cpp:21 #: Source/Core/DolphinQt/Config/Mapping/HotkeyControllerProfile.cpp:26 #: Source/Core/DolphinQt/Config/Mapping/HotkeyControllerProfile.cpp:31 #: Source/Core/DolphinQt/Config/Mapping/HotkeyControllerProfile.cpp:36 #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:430 #: Source/Core/DolphinQt/Config/WiimoteControllersWidget.cpp:139 #: Source/Core/DolphinQt/NetPlay/PadMappingDialog.cpp:43 msgid "Wii Remote %1" msgstr "Wii 遥控器 %1" #: Source/Core/DolphinQt/TAS/WiiTASInputWindow.cpp:112 msgid "Wii Remote Accelerometer" msgstr "Wii 遥控器加速度计" #: Source/Core/DolphinQt/TAS/WiiTASInputWindow.cpp:270 msgid "Wii Remote Buttons" msgstr "Wii 遥控器按键" #: Source/Core/DolphinQt/TAS/WiiTASInputWindow.cpp:145 msgid "Wii Remote Gyroscope" msgstr "Wii 遥控器陀螺仪" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:348 msgid "Wii Remote Settings" msgstr "Wii 遥控器设置" #: Source/Core/DolphinQt/Config/WiimoteControllersWidget.cpp:103 msgid "Wii Remotes" msgstr "Wii 遥控器" #: Source/Core/DolphinQt/TAS/WiiTASInputWindow.cpp:419 msgid "Wii TAS Input %1 - Classic Controller" msgstr "Wii TAS 输入 %1 - 传统控制器" #: Source/Core/DolphinQt/TAS/WiiTASInputWindow.cpp:438 msgid "Wii TAS Input %1 - Wii Remote" msgstr "Wii TAS 输入 %1 - Wii 遥控器" #: Source/Core/DolphinQt/TAS/WiiTASInputWindow.cpp:398 msgid "Wii TAS Input %1 - Wii Remote + Nunchuk" msgstr "Wii TAS 输入 %1 - Wii 遥控器 + 双节棍" #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:453 msgid "Wii and Wii Remote" msgstr "Wii 和 Wii 遥控器" #: Source/Core/DiscIO/VolumeVerifier.cpp:103 msgid "Wii data is not public yet" msgstr "Wii 数据尚未公开" #: Source/Core/DolphinQt/MenuBar.cpp:1094 msgid "Wii save files (*.bin);;All Files (*)" msgstr "Wii 存档文件 (*.bin);; 所有文件 (*)" #: Source/Core/DolphinQt/MenuBar.cpp:76 msgid "WiiTools Signature MEGA File" msgstr "WiiTools 签名 MEGA 文件" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:203 msgid "" "Will lock the Mouse Cursor to the Render Widget as long as it has focus. You " "can set a hotkey to unlock it." msgstr "只要有活动窗口就把鼠标光标锁定到渲染部件。你可以设置一个热键来解锁。 " #: Source/Core/DolphinQt/Config/Mapping/HotkeyGBA.cpp:25 #: Source/Core/DolphinQt/GBAWidget.cpp:432 msgid "Window Size" msgstr "窗口大小" #: Source/Core/DolphinQt/Config/LogWidget.cpp:134 msgid "Word Wrap" msgstr "自动换行" #: Source/Core/DiscIO/Enums.cpp:60 msgid "World" msgstr "全球" #. i18n: This is a selectable condition when adding a breakpoint #: Source/Core/DolphinQt/Debugger/BreakpointDialog.cpp:136 msgid "Write" msgstr "写入" #. i18n: This string is used for a radio button that represents the type of #. memory breakpoint that gets triggered when a write operation occurs. #. The string does not mean "write-only" in the sense that something cannot be read from. #: Source/Core/DolphinQt/Debugger/MemoryWidget.cpp:235 msgid "Write only" msgstr "只写" #: Source/Core/DolphinQt/Config/LogConfigWidget.cpp:56 msgid "Write to Console" msgstr "写入到控制台" #: Source/Core/DolphinQt/Config/LogConfigWidget.cpp:55 msgid "Write to File" msgstr "写入到文件" #. i18n: This is a selectable action when adding a breakpoint #: Source/Core/DolphinQt/Debugger/BreakpointDialog.cpp:141 msgid "Write to Log" msgstr "写入到日志" #. i18n: This is a selectable action when adding a breakpoint #: Source/Core/DolphinQt/Debugger/BreakpointDialog.cpp:145 msgid "Write to Log and Break" msgstr "写入到日志并中断" #: Source/Core/DolphinQt/Config/LogConfigWidget.cpp:57 msgid "Write to Window" msgstr "写入到窗口" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:646 msgid "Wrong disc number" msgstr "光盘编号错误" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:642 msgid "Wrong hash" msgstr "哈希值错误" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:650 msgid "Wrong region" msgstr "区域错误" #: Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp:648 msgid "Wrong revision" msgstr "错误修订版" #. i18n: Refers to a 3D axis (used when mapping motion controls) #: Source/Core/DolphinQt/TAS/WiiTASInputWindow.cpp:122 #: Source/Core/DolphinQt/TAS/WiiTASInputWindow.cpp:162 #: Source/Core/DolphinQt/TAS/WiiTASInputWindow.cpp:189 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Force.cpp:129 msgid "X" msgstr "X" #: Source/Core/DolphinQt/FIFO/FIFOAnalyzer.cpp:569 msgid "XF register " msgstr "XF 寄存器" #: Source/Core/DolphinQt/Settings/BroadbandAdapterSettingsDialog.cpp:67 msgid "XLink Kai BBA Destination Address" msgstr "XLink Kai BBA 目标地址" #. i18n: Refers to a 3D axis (used when mapping motion controls) #: Source/Core/DolphinQt/TAS/WiiTASInputWindow.cpp:128 #: Source/Core/DolphinQt/TAS/WiiTASInputWindow.cpp:168 #: Source/Core/DolphinQt/TAS/WiiTASInputWindow.cpp:195 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Force.cpp:131 msgid "Y" msgstr "Y" #: Source/Core/InputCommon/ControllerEmu/ControlGroup/IMUGyroscope.cpp:33 msgid "Yaw Left" msgstr "左转" #: Source/Core/InputCommon/ControllerEmu/ControlGroup/IMUGyroscope.cpp:34 msgid "Yaw Right" msgstr "右转" #: Source/Core/Core/HW/WiimoteEmu/Extension/Drums.cpp:35 #: Source/Core/Core/HW/WiimoteEmu/Extension/Guitar.cpp:51 msgid "Yellow" msgstr "黄" #: Source/Core/DolphinQt/Debugger/NetworkWidget.cpp:105 #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:244 #: Source/Core/DolphinQt/NetPlay/NetPlayBrowser.cpp:245 msgid "Yes" msgstr "是" #: qtbase/src/gui/kernel/qplatformtheme.cpp:718 msgid "Yes to &All" msgstr "全部选是(&A)" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:297 msgid "" "You are about to convert the content of the file at %2 into the folder at " "%1. All current content of the folder will be deleted. Are you sure you want " "to continue?" msgstr "" "即将把 %2 的文件内容转换到 %1 的文件夹中。文件夹的所有当前内容将被删除。请确" "定是否要继续？" #: Source/Core/DolphinQt/Settings/WiiPane.cpp:272 msgid "" "You are about to convert the content of the folder at %1 into the file at " "%2. All current content of the file will be deleted. Are you sure you want " "to continue?" msgstr "" "即将把 %1 的文件夹内容转换到 %2 的文件中。文件的所有当前内容将被删除。请确定" "是否要继续？" #: Source/Core/DolphinQt/NKitWarningDialog.cpp:39 msgid "" "You are about to run an NKit disc image. NKit disc images cause problems " "that don't happen with normal disc images. These problems include:\n" "\n" "• The emulated loading times are longer\n" "• You can't use NetPlay with people who have normal disc images\n" "• Input recordings are not compatible between NKit disc images and normal " "disc images\n" "• Savestates are not compatible between NKit disc images and normal disc " "images\n" "• Some games can crash, such as Super Paper Mario and Metal Gear Solid: The " "Twin Snakes\n" "• Wii games don't work at all in older versions of Dolphin and in many other " "programs\n" "\n" "Are you sure you want to continue anyway?" msgstr "" "您将要运行 NKit 光盘镜像。NKit 光盘镜像会出现一些正常光盘镜像不会发生的问题。" "这些问题包括：\n" "\n" "• 模拟的加载时间更长\n" "• 不能与具有正常光盘镜像的人一起联机\n" "• NKit 光盘镜像和正常光盘镜像之间的输入记录不兼容\n" "• NKit 光盘镜像和正常光盘镜像之间的保存状态不兼容\n" "• 一些游戏会崩溃，例如超级纸片马里奥和合金装备：孪蛇\n" "• Wii 游戏无法在旧版 Dolphin 和很多其他程序中运作\n" "\n" "您确定要继续吗？" #: Source/Core/DolphinQt/Config/Mapping/GCKeyboardEmu.cpp:36 msgid "" "You are configuring a \"Keyboard Controller\". This device is exclusively " "for \"Phantasy Star Online Episode I & II\". If you are unsure, turn back " "now and configure a \"Standard Controller\"." msgstr "" "你正在配置“键盘控制器”。此设备为《梦幻之星 Online Episode I & II》专用。如无" "法确定，请返回并配置“标准控制器”。" #: Source/Core/UICommon/AutoUpdate.cpp:222 msgid "You are running the latest version available on this update track." msgstr "您正在运行此更新通道上提供的最新版本。" #: Source/Core/Core/DSP/DSPCore.cpp:89 msgid "" "You are using an old free DSP ROM made by the Dolphin Team.\n" "Due to emulation accuracy improvements, this ROM no longer works correctly.\n" "\n" "Delete the dsp_rom.bin and dsp_coef.bin files in the GC folder in the User " "folder to use the most recent free DSP ROM, or replace them with good dumps " "from a real GameCube/Wii.\n" "\n" "Would you like to stop now to fix the problem?\n" "If you select \"No\", audio might be garbled." msgstr "" "您正在使用 Dolphin 小组制作的老旧免费 DSP ROM。\n" "由于模拟精度的提高，此 ROM 不再正常运作。\n" "\n" "删除 User 目录中 GC 文件夹中的 dsp_rom.bin 和 dsp_coef.bin 文件，以使用最新的" "免费 DSP ROM，或者将其替换为来自真实 GameCube/Wii 主机的正确转储。\n" "\n" "您想现在停下来修复此问题吗？\n" "如果选择“否”，音频可能会嘈杂混乱。" #: Source/Core/Core/IOS/ES/ES.cpp:337 msgid "" "You cannot use the Wii Shop Channel without using your own device " "credentials.\n" "Please refer to the NAND usage guide for setup instructions: https://dolphin-" "emu.org/docs/guides/nand-usage-guide/" msgstr "" "你不能在没有自己的设备证书情况下使用 Wii 商店频道。\n" "请参考 NAND 使用指南了解设置说明： https://dolphin-emu.org/docs/guides/nand-" "usage-guide/" #: Source/Core/DolphinQt/Debugger/AssemblerWidget.cpp:310 msgid "" "You have %1 unsaved assembly tabs open\n" "\n" "Do you want to save all and exit?" msgstr "" "有 %1 个打开的未保存汇编选项卡\n" "\n" "您要全部保存并退出吗？" #: Source/Core/DolphinQt/Config/NewPatchDialog.cpp:229 msgid "You have to enter a name." msgstr "您必须输入一个名称。" #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:342 msgid "You must provide a name for your session!" msgstr "你必须为会话提供一个名称！" #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:350 msgid "You must provide a region for your session!" msgstr "你必须为会话提供一个区域！" #: Source/Core/DolphinQt/Settings/InterfacePane.cpp:342 msgid "You must restart Dolphin in order for the change to take effect." msgstr "您必须重新启动 Dolphin 以使改动生效。" #: Source/Core/DolphinQt/NetPlay/NetPlaySetupDialog.cpp:336 msgid "You must select a game to host!" msgstr "你必须选择一个游戏来建主机！" #: Source/Core/Core/DSP/DSPCore.cpp:75 msgid "" "Your DSP ROMs have incorrect hashes.\n" "\n" "Delete the dsp_rom.bin and dsp_coef.bin files in the GC folder in the User " "folder to use the free DSP ROM, or replace them with good dumps from a real " "GameCube/Wii.\n" "\n" "Would you like to stop now to fix the problem?\n" "If you select \"No\", audio might be garbled." msgstr "" "您的 DSP ROM 哈希值不正确。\n" "\n" "删除 User 目录中 GC 文件夹中的 dsp_rom.bin 和 dsp_coef.bin 文件，以使用最新的" "免费 DSP ROM，或者将其替换为来自真实 GameCube/Wii 主机的正确转储。\n" "\n" "您想现在停下来修复此问题吗？\n" "如果选择“否”，音频可能会嘈杂混乱。" #: Source/Core/DolphinQt/MenuBar.cpp:1177 msgid "" "Your NAND contains more data than allowed. Wii software may behave " "incorrectly or not allow saving." msgstr "" "您的 NAND 包含的数据超过了允许的数量。Wii 软件可能出现异常或不允许保存。" #. i18n: Refers to a 3D axis (used when mapping motion controls) #: Source/Core/DolphinQt/TAS/WiiTASInputWindow.cpp:134 #: Source/Core/DolphinQt/TAS/WiiTASInputWindow.cpp:174 #: Source/Core/DolphinQt/TAS/WiiTASInputWindow.cpp:201 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Force.cpp:133 msgid "Z" msgstr "Z" #: Source/Core/Core/ActionReplay.cpp:941 msgid "Zero 3 code not supported" msgstr "Zero 3 代码不支持" #: Source/Core/Core/ActionReplay.cpp:961 msgid "Zero code unknown to Dolphin: {0:08x}" msgstr "Dophin 未知的零代码：{0:08x}" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:97 msgid "[%1, %2]" msgstr "[%1, %2]" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:107 msgid "[%1, %2] and [%3, %4]" msgstr "[%1, %2] 和 [%3, %4]" #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:292 msgid "^ Xor" msgstr "^ 异或" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:173 msgid "aligned" msgstr "已对齐" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:205 msgid "any value" msgstr "任意值" #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:96 msgid "auto" msgstr "自动" #. i18n: The symbol/abbreviation for centimeters. #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Cursor.cpp:41 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Force.cpp:30 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Force.cpp:143 msgid "cm" msgstr "厘米" #: Source/Core/VideoBackends/D3D12/DX12Context.cpp:108 msgid "d3d12.dll could not be loaded." msgstr "无法加载 d3d12.dll。" #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:635 #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:655 msgid "default" msgstr "默认" #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:657 #: Source/Core/DolphinQt/Config/Mapping/MappingWindow.cpp:387 msgid "disconnected" msgstr "连接已断开" #: Source/Core/DolphinQt/GBAWidget.cpp:192 msgid "e-Reader Cards (*.raw);;All Files (*)" msgstr "e-Reader 卡 (*.raw);;所有文件 (*)" #: Source/Core/DolphinQt/Debugger/ThreadWidget.cpp:187 msgid "errno" msgstr "errno" #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:96 msgid "fake-completion" msgstr "伪完成" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:186 msgid "is equal to" msgstr "等于" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:194 msgid "is greater than" msgstr "大于" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:196 msgid "is greater than or equal to" msgstr "大于或等于" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:190 msgid "is less than" msgstr "小于" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:192 msgid "is less than or equal to" msgstr "小于或等于" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:188 msgid "is not equal to" msgstr "不等于" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:204 msgid "last value" msgstr "上个值" #. i18n: The symbol/abbreviation for meters per second. #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Force.cpp:44 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Force.cpp:53 msgid "m/s" msgstr "米/秒" #: Source/Core/DolphinQt/GBAWidget.cpp:215 msgid "" "mGBA Save States (*.ss0 *.ss1 *.ss2 *.ss3 *.ss4 *.ss5 *.ss6 *.ss7 *.ss8 *." "ss9);;All Files (*)" msgstr "" "mGBA 即时存档 (*.ss0 *.ss1 *.ss2 *.ss3 *.ss4 *.ss5 *.ss6 *.ss7 *.ss8 *.ss9);;" "所有文件 (*)" #: Source/Core/DolphinQt/Config/GameConfigWidget.cpp:96 msgid "none" msgstr "无" #: Source/Core/DolphinQt/Debugger/BreakpointWidget.cpp:187 #: Source/Core/DolphinQt/Debugger/BreakpointWidget.cpp:229 msgid "off" msgstr "关" #: Source/Core/DolphinQt/Debugger/BreakpointWidget.cpp:187 #: Source/Core/DolphinQt/Debugger/BreakpointWidget.cpp:229 msgid "on" msgstr "开" #: Source/Core/DolphinQt/Settings/USBDeviceAddToWhitelistDialog.cpp:81 msgid "or select a device" msgstr "或选择一个设备" #. i18n: "s" is the symbol for seconds. #: Source/Core/InputCommon/ControllerEmu/ControlGroup/IMUGyroscope.cpp:47 msgid "s" msgstr "秒" #: Source/Core/DolphinQt/Config/Graphics/ColorCorrectionConfigWindow.cpp:101 msgid "sRGB" msgstr "sRGB" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:202 msgid "this value:" msgstr "这个值：" #: Source/Core/Core/HW/WiimoteEmu/Extension/UDrawTablet.cpp:35 #: Source/Core/DolphinQt/Config/Mapping/WiimoteEmuExtension.cpp:185 msgid "uDraw GameTablet" msgstr "uDraw 绘图板" #: Source/Core/DolphinQt/CheatSearchWidget.cpp:173 msgid "unaligned" msgstr "未对齐" #. i18n: This string is referring to a game mode in Super Smash Bros. Brawl called Masterpieces #. where you play demos of NES/SNES/N64 games. This string is referring to a specific such demo #. rather than the game mode as a whole, so please use the singular form. Official translations: #. 名作トライアル (Japanese), Masterpieces (English), Meisterstücke (German), Chefs-d'œuvre #. (French), Clásicos (Spanish), Capolavori (Italian), 클래식 게임 체험판 (Korean). #. If your language is not one of the languages above, consider leaving the string untranslated #. so that people will recognize it as the name of the game mode. #: Source/Core/DiscIO/VolumeVerifier.cpp:706 msgid "{0} (Masterpiece)" msgstr "{0} (Masterpiece)" #: Source/Core/UICommon/GameFile.cpp:771 msgid "{0} (NKit)" msgstr "{0} (NKit)" #: Source/Core/Core/Boot/Boot.cpp:442 msgid "{0} IPL found in {1} directory. The disc might not be recognized" msgstr "{0} IPL 位于 {1} 目录中。光盘可能无法识别" #: Source/Core/Core/NetPlayServer.cpp:1231 msgid "{0} failed to synchronize codes." msgstr "{0} 同步代码失败。" #: Source/Core/Core/NetPlayServer.cpp:1173 msgid "{0} failed to synchronize." msgstr "{0} 同步失败。" #: Source/Core/Core/HW/EXI/EXI_DeviceMemoryCard.cpp:209 msgid "" "{0} is not a directory, failed to move to *.original.\n" " Verify your write permissions or move the file outside of Dolphin" msgstr "" "{0} 不是一个目录，移动至 *.original 失败。\n" "请验证你的写入权限或者将文件移动至 Dolphin 之外" #: Source/Core/DiscIO/CompressedBlob.cpp:265 #: Source/Core/DiscIO/WIABlob.cpp:1703 msgid "{0} of {1} blocks. Compression ratio {2}%" msgstr "区块 {0} ，共 {1} 。压缩率 {2}%" #: Source/Core/Core/HW/EXI/EXI_DeviceMemoryCard.cpp:200 msgid "{0} was not a directory, moved to *.original" msgstr "{0} 不是一个目录，已移动至 *.original" #: Source/Core/DolphinQt/Config/Mapping/IOWindow.cpp:294 msgid "| Or" msgstr "| 或" #. i18n: This message uses curly quotes in English. If you want to use curly quotes #. in your translation, please use the type of curly quotes that's appropriate for #. your language. If you aren't sure which type is appropriate, see #. https://en.wikipedia.org/wiki/Quotation_mark#Specific_language_features #: Source/Core/DolphinQt/AboutDialog.cpp:82 msgid "" "© 2003-2015+ Dolphin Team. “GameCube” and “Wii” are trademarks of Nintendo. " "Dolphin is not affiliated with Nintendo in any way." msgstr "" "© 2003-2015+ Dolphin 团队。“GameCube” 和 “Wii” 是任天堂的商标。Dolphin 与任天" "堂没有任何形式的关联。" #. i18n: The symbol/abbreviation for degrees (unit of angular measure). #. i18n: The degrees symbol. #. i18n: The symbol/abbreviation for degrees (unit of angular measure). #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.cpp:240 #: Source/Core/Core/HW/WiimoteEmu/WiimoteEmu.cpp:248 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/ControlGroup.cpp:35 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Cursor.cpp:48 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Cursor.cpp:57 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Force.cpp:61 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/IMUCursor.cpp:37 #: Source/Core/InputCommon/ControllerEmu/ControlGroup/Tilt.cpp:30 msgid "°" msgstr "°" #. i18n: "°/s" is the symbol for degrees (angular measurement) divided by seconds. #: Source/Core/InputCommon/ControllerEmu/ControlGroup/IMUGyroscope.cpp:39 msgid "°/s" msgstr "度/秒" #: Source/Core/DolphinQt/DiscordJoinRequestDialog.cpp:53 msgid "✔ Invite" msgstr "✔ 邀请" #: Source/Core/DolphinQt/DiscordJoinRequestDialog.cpp:54 msgid "✖ Decline" msgstr "✖ 拒绝"