// Copyright 2008 Dolphin Emulator Project // Licensed under GPLv2+ // Refer to the license.txt file included. #include "AudioCommon/Mixer.h" #include #include #include "AudioCommon/DPL2Decoder.h" #include "Common/ChunkFile.h" #include "Common/CommonTypes.h" #include "Common/Logging/Log.h" #include "Common/MathUtil.h" #include "Common/Swap.h" #include "Core/ConfigManager.h" Mixer::Mixer(unsigned int BackendSampleRate) : m_sampleRate(BackendSampleRate), m_stretcher(BackendSampleRate) { INFO_LOG(AUDIO_INTERFACE, "Mixer is initialized"); DPL2Reset(); } Mixer::~Mixer() { } void Mixer::DoState(PointerWrap& p) { m_dma_mixer.DoState(p); m_streaming_mixer.DoState(p); m_wiimote_speaker_mixer.DoState(p); } // Executed from sound stream thread unsigned int Mixer::MixerFifo::Mix(short* samples, unsigned int numSamples, bool consider_framelimit) { unsigned int currentSample = 0; // Cache access in non-volatile variable // This is the only function changing the read value, so it's safe to // cache it locally although it's written here. // The writing pointer will be modified outside, but it will only increase, // so we will just ignore new written data while interpolating. // Without this cache, the compiler wouldn't be allowed to optimize the // interpolation loop. u32 indexR = m_indexR.load(); u32 indexW = m_indexW.load(); // render numleft sample pairs to samples[] // advance indexR with sample position // remember fractional offset float emulationspeed = SConfig::GetInstance().m_EmulationSpeed; float aid_sample_rate = static_cast(m_input_sample_rate); if (consider_framelimit && emulationspeed > 0.0f) { float numLeft = static_cast(((indexW - indexR) & INDEX_MASK) / 2); u32 low_waterwark = m_input_sample_rate * SConfig::GetInstance().iTimingVariance / 1000; low_waterwark = std::min(low_waterwark, MAX_SAMPLES / 2); m_numLeftI = (numLeft + m_numLeftI * (CONTROL_AVG - 1)) / CONTROL_AVG; float offset = (m_numLeftI - low_waterwark) * CONTROL_FACTOR; if (offset > MAX_FREQ_SHIFT) offset = MAX_FREQ_SHIFT; if (offset < -MAX_FREQ_SHIFT) offset = -MAX_FREQ_SHIFT; aid_sample_rate = (aid_sample_rate + offset) * emulationspeed; } const u32 ratio = (u32)(65536.0f * aid_sample_rate / (float)m_mixer->m_sampleRate); s32 lvolume = m_LVolume.load(); s32 rvolume = m_RVolume.load(); // TODO: consider a higher-quality resampling algorithm. for (; currentSample < numSamples * 2 && ((indexW - indexR) & INDEX_MASK) > 2; currentSample += 2) { u32 indexR2 = indexR + 2; // next sample s16 l1 = Common::swap16(m_buffer[indexR & INDEX_MASK]); // current s16 l2 = Common::swap16(m_buffer[indexR2 & INDEX_MASK]); // next int sampleL = ((l1 << 16) + (l2 - l1) * (u16)m_frac) >> 16; sampleL = (sampleL * lvolume) >> 8; sampleL += samples[currentSample + 1]; samples[currentSample + 1] = MathUtil::Clamp(sampleL, -32767, 32767); s16 r1 = Common::swap16(m_buffer[(indexR + 1) & INDEX_MASK]); // current s16 r2 = Common::swap16(m_buffer[(indexR2 + 1) & INDEX_MASK]); // next int sampleR = ((r1 << 16) + (r2 - r1) * (u16)m_frac) >> 16; sampleR = (sampleR * rvolume) >> 8; sampleR += samples[currentSample]; samples[currentSample] = MathUtil::Clamp(sampleR, -32767, 32767); m_frac += ratio; indexR += 2 * (u16)(m_frac >> 16); m_frac &= 0xffff; } // Actual number of samples written to the buffer without padding. unsigned int actual_sample_count = currentSample / 2; // Padding short s[2]; s[0] = Common::swap16(m_buffer[(indexR - 1) & INDEX_MASK]); s[1] = Common::swap16(m_buffer[(indexR - 2) & INDEX_MASK]); s[0] = (s[0] * rvolume) >> 8; s[1] = (s[1] * lvolume) >> 8; for (; currentSample < numSamples * 2; currentSample += 2) { int sampleR = MathUtil::Clamp(s[0] + samples[currentSample + 0], -32767, 32767); int sampleL = MathUtil::Clamp(s[1] + samples[currentSample + 1], -32767, 32767); samples[currentSample + 0] = sampleR; samples[currentSample + 1] = sampleL; } // Flush cached variable m_indexR.store(indexR); return actual_sample_count; } unsigned int Mixer::Mix(short* samples, unsigned int num_samples) { if (!samples) return 0; memset(samples, 0, num_samples * 2 * sizeof(short)); if (SConfig::GetInstance().m_audio_stretch) { unsigned int available_samples = std::min(m_dma_mixer.AvailableSamples(), m_streaming_mixer.AvailableSamples()); m_scratch_buffer.fill(0); m_dma_mixer.Mix(m_scratch_buffer.data(), available_samples, false); m_streaming_mixer.Mix(m_scratch_buffer.data(), available_samples, false); m_wiimote_speaker_mixer.Mix(m_scratch_buffer.data(), available_samples, false); if (!m_is_stretching) { m_stretcher.Clear(); m_is_stretching = true; } m_stretcher.ProcessSamples(m_scratch_buffer.data(), available_samples, num_samples); m_stretcher.GetStretchedSamples(samples, num_samples); } else { m_dma_mixer.Mix(samples, num_samples, true); m_streaming_mixer.Mix(samples, num_samples, true); m_wiimote_speaker_mixer.Mix(samples, num_samples, true); m_is_stretching = false; } return num_samples; } unsigned int Mixer::MixSurround(float* samples, unsigned int num_samples) { if (!num_samples) return 0; memset(samples, 0, num_samples * 6 * sizeof(float)); // Mix() may also use m_scratch_buffer internally, but is safe because it alternates reads and // writes. unsigned int available_samples = Mix(m_scratch_buffer.data(), num_samples); for (size_t i = 0; i < static_cast(available_samples) * 2; ++i) { m_float_conversion_buffer[i] = m_scratch_buffer[i] / static_cast(std::numeric_limits::max()); } DPL2Decode(m_float_conversion_buffer.data(), available_samples, samples); return available_samples; } void Mixer::MixerFifo::PushSamples(const short* samples, unsigned int num_samples) { // Cache access in non-volatile variable // indexR isn't allowed to cache in the audio throttling loop as it // needs to get updates to not deadlock. u32 indexW = m_indexW.load(); // Check if we have enough free space // indexW == m_indexR results in empty buffer, so indexR must always be smaller than indexW if (num_samples * 2 + ((indexW - m_indexR.load()) & INDEX_MASK) >= MAX_SAMPLES * 2) return; // AyuanX: Actual re-sampling work has been moved to sound thread // to alleviate the workload on main thread // and we simply store raw data here to make fast mem copy int over_bytes = num_samples * 4 - (MAX_SAMPLES * 2 - (indexW & INDEX_MASK)) * sizeof(short); if (over_bytes > 0) { memcpy(&m_buffer[indexW & INDEX_MASK], samples, num_samples * 4 - over_bytes); memcpy(&m_buffer[0], samples + (num_samples * 4 - over_bytes) / sizeof(short), over_bytes); } else { memcpy(&m_buffer[indexW & INDEX_MASK], samples, num_samples * 4); } m_indexW.fetch_add(num_samples * 2); } void Mixer::PushSamples(const short* samples, unsigned int num_samples) { m_dma_mixer.PushSamples(samples, num_samples); int sample_rate = m_dma_mixer.GetInputSampleRate(); if (m_log_dsp_audio) m_wave_writer_dsp.AddStereoSamplesBE(samples, num_samples, sample_rate); } void Mixer::PushStreamingSamples(const short* samples, unsigned int num_samples) { m_streaming_mixer.PushSamples(samples, num_samples); int sample_rate = m_streaming_mixer.GetInputSampleRate(); if (m_log_dtk_audio) m_wave_writer_dtk.AddStereoSamplesBE(samples, num_samples, sample_rate); } void Mixer::PushWiimoteSpeakerSamples(const short* samples, unsigned int num_samples, unsigned int sample_rate) { short samples_stereo[MAX_SAMPLES * 2]; if (num_samples < MAX_SAMPLES) { m_wiimote_speaker_mixer.SetInputSampleRate(sample_rate); for (unsigned int i = 0; i < num_samples; ++i) { samples_stereo[i * 2] = Common::swap16(samples[i]); samples_stereo[i * 2 + 1] = Common::swap16(samples[i]); } m_wiimote_speaker_mixer.PushSamples(samples_stereo, num_samples); } } void Mixer::SetDMAInputSampleRate(unsigned int rate) { m_dma_mixer.SetInputSampleRate(rate); } void Mixer::SetStreamInputSampleRate(unsigned int rate) { m_streaming_mixer.SetInputSampleRate(rate); } void Mixer::SetStreamingVolume(unsigned int lvolume, unsigned int rvolume) { m_streaming_mixer.SetVolume(lvolume, rvolume); } void Mixer::SetWiimoteSpeakerVolume(unsigned int lvolume, unsigned int rvolume) { m_wiimote_speaker_mixer.SetVolume(lvolume, rvolume); } void Mixer::StartLogDTKAudio(const std::string& filename) { if (!m_log_dtk_audio) { bool success = m_wave_writer_dtk.Start(filename, m_streaming_mixer.GetInputSampleRate()); if (success) { m_log_dtk_audio = true; m_wave_writer_dtk.SetSkipSilence(false); NOTICE_LOG(AUDIO, "Starting DTK Audio logging"); } else { m_wave_writer_dtk.Stop(); NOTICE_LOG(AUDIO, "Unable to start DTK Audio logging"); } } else { WARN_LOG(AUDIO, "DTK Audio logging has already been started"); } } void Mixer::StopLogDTKAudio() { if (m_log_dtk_audio) { m_log_dtk_audio = false; m_wave_writer_dtk.Stop(); NOTICE_LOG(AUDIO, "Stopping DTK Audio logging"); } else { WARN_LOG(AUDIO, "DTK Audio logging has already been stopped"); } } void Mixer::StartLogDSPAudio(const std::string& filename) { if (!m_log_dsp_audio) { bool success = m_wave_writer_dsp.Start(filename, m_dma_mixer.GetInputSampleRate()); if (success) { m_log_dsp_audio = true; m_wave_writer_dsp.SetSkipSilence(false); NOTICE_LOG(AUDIO, "Starting DSP Audio logging"); } else { m_wave_writer_dsp.Stop(); NOTICE_LOG(AUDIO, "Unable to start DSP Audio logging"); } } else { WARN_LOG(AUDIO, "DSP Audio logging has already been started"); } } void Mixer::StopLogDSPAudio() { if (m_log_dsp_audio) { m_log_dsp_audio = false; m_wave_writer_dsp.Stop(); NOTICE_LOG(AUDIO, "Stopping DSP Audio logging"); } else { WARN_LOG(AUDIO, "DSP Audio logging has already been stopped"); } } void Mixer::MixerFifo::DoState(PointerWrap& p) { p.Do(m_input_sample_rate); p.Do(m_LVolume); p.Do(m_RVolume); } void Mixer::MixerFifo::SetInputSampleRate(unsigned int rate) { m_input_sample_rate = rate; } unsigned int Mixer::MixerFifo::GetInputSampleRate() const { return m_input_sample_rate; } void Mixer::MixerFifo::SetVolume(unsigned int lvolume, unsigned int rvolume) { m_LVolume.store(lvolume + (lvolume >> 7)); m_RVolume.store(rvolume + (rvolume >> 7)); } unsigned int Mixer::MixerFifo::AvailableSamples() const { unsigned int samples_in_fifo = ((m_indexW.load() - m_indexR.load()) & INDEX_MASK) / 2; if (samples_in_fifo <= 1) return 0; // Mixer::MixerFifo::Mix always keeps one sample in the buffer. return (samples_in_fifo - 1) * m_mixer->m_sampleRate / m_input_sample_rate; }