When we cleaned up the code to calculate the shm_position and total_mem
in one step, we sometimes skipped over certain views because they were
Wii-only. When looking at the total memory, we'd look at the last field,
whether or not it was skipped. Since Wii-only fields are the last view,
this meant that the shm_position was 0, since it was skipped, causing us
to map a 0-sized field. Fix this by explicitly returning the total size
from MemoryMap_InitializeViews.
Additionally, the shm_position was being calculated incorrectly because
it was adding up the shm_position *before* the mirror, rather than after
it. Fix this by adopting a scheme similar to what we had before.
The code to calculate the offsets into the SHM file wasn't properly
respecting the skip flags, causing it to calculate offsets beyond
the end of the SHM file.
This code was ported from out_ptr, which was a double-pointer, and
wanted to double-check that the proper arena was actually allocated.
When I ported it to store the pointer directly in the view regardless
of whether out_ptr was non-NULL, I got confused here and instead
caused the code to only free the arena if the first byte was non-zero.
This code originally tried to map the "low space" for the Gamecube's
memory layout, but since has expanded to mapping all of the easily
mappable memory on the system. Change the name to "GrabSHMSegment" to
indicate that we're looking for a shared memory segment we can map into
our process space.
These are effectively unused, since the memmap already maps them in one
place. For 32-bit, they might have some slight advantage, but we already
special-case the regular "high-mem" pointer for 32-bit, so just use the
one we already have...
This is a higher level, more concise wrapper for bitsets which supports
efficiently counting and iterating over set bits. It's similar to
std::bitset, but the latter does not support efficient iteration (and at
least in libc++, the count algorithm is subpar, not that it really
matters). The converted uses include both bitsets and, notably,
considerably less efficient regular arrays (for in/out registers in
PPCAnalyst).
Unfortunately, this may slightly pessimize unoptimized builds.
We weren't dropping a newline character from the string, we were cutting off the last character of the hardware name.
This fixes my TK1 being called 'lagun' when it's name is 'laguna'
GCC has optimized this using the exact same code since 4.7 or 4.8.
Android building falls back to the __linux__ route.
No need to keep these around anymore since we aren't building on an old GCC version.
Before this commit, the two were reversed ("cpu_string" had the brand, e.g. "AuthenticAMD"; and "brand_string" had the CPU type, e.g. "AMD Phenom II X4 925").
This is good hygiene, and also happens to be required to build Dolphin
using Clang modules.
(Under this setup, each header file becomes a module, and each #include
is automatically translated to a module import. Recursive includes
still leak through (by default), but modules are compiled independently,
and can't depend on defines or types having previously been set up. The
main reason to retrofit it onto Dolphin is compilation performance - no
more textual includes whatsoever, rather than putting a few blessed
common headers into a PCH. Unfortunately, I found multiple Clang bugs
while trying to build Dolphin this way, so it's not ready yet, but I can
start with this prerequisite.)
I found it via clang complaining about a useless null check on an array,
but I decided to get rid of the array in favor of dynamic allocation, as
there was no reason to assume a maximum length of 0x32 bytes. Plus, add
a CFString type check just in case, and switch to UTF-8 in the
off-chance it matters.
The result has not actually been tested, as I have no CD drive.
It only ever did anything on 32-bit OS X.
Anyway, it wasn't even on the right functions, and these days
ABI_PushRegistersAndAdjustStack should handle maintaining the ABI
correctly.
This helps us avoid accidentally clobbering flags between two instructions
when the flags are expected to be maintained. Dolphin will of course crash
immediately, but at least it will crash loudly and alert us of the mistake,
instead of forcing hours of bisecting to find the subtle way in which the JIT
has managed to sneak a flag-modifying instruction where there shouldn't be one.
This is inconsistent with how other containers are used (i.e. with Do()), but making std::array be used with Do() seems rather confusing when there's also a DoArray available.
To avoid FPRs being pushed unnecessarily, I checked the uses: DSPEmitter
doesn't use FPRs, and VertexLoader doesn't use anything but RAX, so I
specified the register list accordingly. The regular JIT, however, does
use FPRs, and as far as I can tell, it was incorrect not to save them in
the outer routine. Since the dispatcher loop is only exited when
pausing or stopping, this should have no noticeable performance impact.
- Factor common work into a helper function.
- Replace confusingly named "noProlog" with "rsp_alignment". Now that
x86 is not supported, we can just specify it explicitly as 8 for
clarity.
- Add the option to include more frame size, which I'll need later.
- Revert a change by magumagu in March which replaced MOVAPD with MOVUPD
on account of 32-bit Windows, since it's no longer supported. True,
apparently recent processors don't execute the former any faster if the
pointer is, in fact, aligned, but there's no point using MOVUPD for
something that's guaranteed to be aligned...
(I discovered that GenFrsqrte and GenFres were incorrectly passing false
to noProlog - they were, in fact, functions without prologs, the
original meaning of the parameter - which caused the previous change to
break. This is now fixed.)
This is the bare minimum required to run a few games on AArch64.
Was able to run starfield and Animal Crossing to the Nintendo logo.
QEmu emulation is literally the slowest thing in the world, it maxes out at around 12mhz on my Core i7-4930MX.
I've tested a few instruction encodings and am expecting most to work as long as one stays away from VFP/SIMD.
This implements mostly instructions to bring up an initial JIT with integer support.
This can be improved to allow ease of use functions in the future, dealing with the raw imms/immr encodings is probably the worst thing ever.
Uses are split into three categories:
- Arbitrary (except for size savings) - constants like RSCRATCH are
used.
- ABI (i.e. RAX as return value) - ABI_RETURN is used.
- Fixed by architecture (RCX shifts, RDX/RAX for some instructions) -
explicit register is kept.
In theory this allows the assignments to be modified easily. I verified
that I was able to run Melee with all the registers changed, although
there may be issues if RSCRATCH[2] and ABI_PARAM{1,2} conflict.
The special case is where the registers are actually to be swapped (i.e.
func(ABI_PARAM2, ABI_PARAM1); this was previously impossible but would
be ugly not to handle anyway.
Prior to this change, it was possible to cause an infinite loop by making the string to be replaced and the replacing string the same thing.
e.g.
std::string some_str = "test";
ReplaceAll(some_str, "test", "test");
This also changes the replacing in a way that doesn't require starting from the beginning of the string on each replacement iteration.
Decreases total Wii state save time (not counting compression) from
~570ms to ~18ms.
The compiler can't remove this check because of potential aliasing; this
might be fixable (e.g. by making mode const), but there is no reason to
have the code work in such a braindead way in the first place.
- DoVoid now uses memcpy.
- DoArray now uses DoVoid on the whole rather than Doing each element
(would fail for an array of STL structures, but we don't have any of
those).
- Do also now uses DoVoid. (In the previous version, it replicated
DoVoid's code in order to ensure each type gets its own implementation,
which for small types then becomes a simple load/store in any modern
compiler. Now DoVoid is __forceinline, which addresses that issue and
shouldn't make a big difference otherwise - perhaps a few extra copies
of the code inlined into DoArray or whatever.)
(1) Rename ABI_ALL_CALLEE_SAVED to ABI_ALL_CALLER_SAVED, because that's
what it was actually defined as (and used as). Derp.
(2) RegistersInUse is always used for the purpose of saving registers
before calling a C++ function in the middle of a JIT block (without
flushing). There is no need to save callee-saved registers in this
case. Change the name to CallerSavedRegistersInUse and mask with
ABI_ALL_CALLER_SAVED.
Nothing obvious broke when starting up a Melee game. (I added a test
for anything actually being masked out; it happens, but in this
particular case seemed to occur at most a few dozen times per second, so
the actual performance benefit is probably negligible.)
This class loads all the common PP shader configuration options and passes those options through to a inherited class that OpenGL or D3D will have.
Makes it so all the common code for PP shaders is in VideoCommon instead of duplicating the code across each backend.
This was actually never used as far as I can tell. There was no wx event handling done whatsoever for the global ID, So this is basically a dead function.
This moves the Gekko disassembler to Common where it should be. Having it in the Bochs disassembly Externals is incorrect.
Unlike the PowerPC disassembler prior however, this one is updated to have an API that is more fitting for C++. e.g. Not needing to specify a string buffer and size. It does all of this under the hood.
This modifies all the DebuggingInterfaces as necessary to handle this.
On error mmap returns MAP_FAILED(-1) not null.
FreeBSD was checking the return correctly, Linux was not.
This was noticed by triad attempting to run Dolphin under valgrind and not getting a memory space under the 2GB limit(Because -1 wraps around on
unsigned obviously)
Previously using the new "lower 8 bits" registers (SIL, SPL, ...) caused SETcc
to write to other registers (for example, SETcc SIL would generate SETcc DH).
It was only used for Windows XP and lower.
This also bumps the _WIN32_WINNT define in the stdafx precompiled headers to set the minimum version as Windows Vista.
A previous PR changed a whole lot of min/maxes to std::min/std::max
but made a mistake here and used a templated min which cast it's
arguments to unsigned instead of casting return value.
This resulted in glitchy artifacts in bright areas (See issue 7439)
I rewrote the code to use a proper clamping function so it's cleaner
to read.
This shouldn't really be exposed as a public function and should only be called through other Do class functions that take a container type as a parameter.
Sometimes (in particular when using non-typesafe functions) it can be convenient to have a getter method rather than performing a potentially lengthy explicit cast.
This allows for removal of the strcpy calls, also it's technically way more safe, though I doubt we'll ever have a log name larger than 128 characters or a short description larger than 32 characters.
Also moved these assignments into the constructor's initializer list.
If a CPU string was incapable of being found we would return a null pointer, which would crash with strncpy.
Also if we couldn't get a CPU implementer we would call free() to a null pointer.
In addition, detect 64bit ARM running.
MemoryUtil.cpp was incorrectly using the old __x86_64__ define when it should be using _M_X86_64.
It was also using _ARCH_64 when it shouldn't have which was causing an errant PanicAlert to come up in my development.
Some compilers we care about (mostly g++) do not support std::make_unique yet,
but we still want to use it in our codebase to make unique_ptr code more
readable. This commit introduces an implementation derivated from the libc++
code in the Dolphin codebase so we can use it right now everywhere.
Adapted from delroth's pull request.
Set the x87 precision, even on x64. Since we are using x87 instructions
in the JIT now, we can't guarantee that x87 precision will never
influence Dolphin on x64.
The new NOP emitter breaks when called with a negative count. As it
turns out, it did happen when deoptimizing 8 bit MOVs because they are
only 4 bytes long and need no BSWAP.
Fixes issue 6990.
This uses a bit of templating to remove the duplicate code that is the CodeBlocks in each emitter headers.
No actual functionality change in this.
When creating a Fixupbranch we were swapping the BL and B targets.
I think this was found by PPSSPP a while ago, but they never send PRs to merge their changes upstream.
Between C++11 and C++14, volatile types stopped being trivially
copyable. The serializer has no reason to care about this distinction,
so tack on remove_volatile.
The underlying storage type of a bitfield can be any intrinsic integer type,
but also any enumeration.
Custom storage types are supported if the following things are defined on the storage type:
- casting 0 to the storage type
- bit shift operators (in both directions)
- bitwise & operator
- bitwise ~ operator
- std::make_unsigned specialization
Previously he function was misbehaving because of a missing check for
whether an 8-bit operand was a register operand; it would therefore
emit unnecessary REX prefixes, incorrectly assert on 32-bit targets, and
could potentially emit wrong code in rare cases (like a memory to register
operation involving AH.)
Also, some cleanup while I was in the area to make the function easier to
read.
The workaround of using fixed underlying types produces lots of warnings
in GCC because now the bit-fields are too small for the value range used
for conversion semantics.
Breakpoints have one, but memchecks don't, despite being cleared directly in the breakpoint window.
Now DolphinWX should call the interface functions and not the direct functions of the breakpoints or memchecks for clearing.
Our defines were never clear between what meant 64bit or x86_64
This makes a clear cut between bitness and architecture.
This commit also has the side effect of bringing up aarch64 compiling support.
- remove unused variables
- reduce the scope where it makes sense
- correct limits (did you know that strcat()'s last parameter does not
include the \0 that is always added?)
- set some free()'d pointers to NULL
This breaks Linux stdout logging.
This reverts commit 7ac5b1f2f8, reversing
changes made to 9bc14012fc.
Revert "Merge pull request #77 from lioncash/remove-console"
This reverts commit 9bc14012fc, reversing
changes made to b18a33377d.
Conflicts:
Source/Core/Common/LogManager.cpp
Source/Core/DolphinWX/Frame.cpp
Source/Core/DolphinWX/FrameAui.cpp
Source/Core/DolphinWX/LogConfigWindow.cpp
Source/Core/DolphinWX/LogWindow.cpp
Note I do not mean the Logging window, but the console window.
It's literally rarely, if at all used, and offers less advantages over the built-in logging window (ie. it breaks on different locales: http://i.imgur.com/Cs92tQE.png)
This commit should remove all of the console logging.
Floating-point is complicated...
Some background: Denormals are floats that are too close to zero to be
stored in a normalized way (their exponent would need more bits). Since
they are stored unnormalized, they are hard to work with, even in
hardware. That's why both PowerPC and SSE can be configured to operate
in faster but non-standard-conpliant modes in which these numbers are
simply rounded ('flushed') to zero.
Internally, we do the same as the PowerPC CPU and store all floats in
double format. This means that for loading and storing singles we need a
conversion. The PowerPC CPU does this in hardware. We previously did
this using CVTSS2SD/CVTSD2SS. Unfortunately, these instructions are
considered arithmetic and therefore flush denormals to zero if non-IEEE
mode is active. This normally wouldn't be a problem since the next
arithmetic floating-point instruction would do the same anyway but as it
turns out some games actually use floating-point instructions for
copying arbitrary data.
My idea for fixing this problem was to use x87 instructions since the
x87 FPU never supported flush-to-zero and thus doesn't mangle denormals.
However, there is one more problem to deal with: SNaNs are automatically
converted to QNaNs (by setting the most-significant bit of the
fraction). I opted to fix this by manually resetting the QNaN bit of all
values with all-1s exponent.
I give up. Merging the ppc_fp branch has caused issues in numerous games
and I can't find the bug. I'm leaving this merged to enable easy
recompilation for people who would like to play games that benefit from
non-IEEE mode emulation (e.g. Starfox Assault).
MemArena mmaps the emulated memory from a file in order to get the same
mapping at multiple addresses. A file which, formerly, was located at a
static filename: it was unlinked after creation, but the open did not
use O_EXCL, so if two instances started up on the same system at just
the right time, they would get the same memory. Naturally, this caused
extremely mysterious crashes, but only in Netplay, where the game is
automatically started when the client receives a broadcast from the
server, so races are actually quite likely.
And switch to shm_open, because it fits the bill better and avoids any
issues with using /tmp.
bDAZ is now called bFlushToZero to better reflect what it's actually
used for.
I decided not to support any hardware-based flush-to-zero on systems
that don't support this for both inputs _and_ outputs. It makes the code
cleaner and the intersection of CPUs that support SSE2 but not DAZ
should be very small.
- Add support for std::set and std:pair.
- Switch from std::is_pod to std::is_trivially_copyable, to allow for
types that have constructors but trivial copy constructors. Easy,
except there are three different nonstandard versions of it required
on different platforms, in addition to the standard one.
* Currently there is no DEBUGFAST configuration. Defining DEBUGFAST as a preprocessor definition in Base.props (or a global header) enables it for now, pending a better method. This was done to make managing the build harder to screw up. However it may not even be an issue anymore with the new .props usage.
* D3DX11SaveTextureToFile usage is dropped and not replaced.
* If you have $(DXSDK_DIR) in your global property sheets (Microsoft.Cpp.$(PlatformName).user), you need to remove it. The build will error out with a message if it's configured incorrectly.
* If you are on Windows 8 or above, you no longer need the June 2010 DirectX SDK installed to build dolphin. If you are in this situation, it is still required if you want your built binaries to be able to use XAudio2 and XInput on previous Windows versions.
* GLew updated to 1.10.0
* compiler switches added: /volatile:iso, /d2Zi+
* LTCG available via msbuild property: DolphinRelease
* SDL updated to 2.0.0
* All Externals (excl. OpenAL and SDL) are built from source.
* Now uses STL version of std::{mutex,condition_variable,thread}
* Now uses Build as root directory for *all* intermediate files
* Binary directory is populated as post-build msbuild action
* .gitignore is simplified
* UnitTests project is no longer compiled
Note that before pushing those changes, they were initially tested in a branch, and passed the compilation testing. Sorry that I didn't catch this before.
This implements a partial JITIL based off of the JIT64IL. It's enough to run most games, albiet at a slow speed.
Implementing instructions for this IL is really simple since it basically is just enabling based on what is already in JIT64IL, and then enabling each individual IL instruction.
And fix some stuff up. It would probably be good to unify the stack
handling some more rather than having ABI_PushRegistersAndAdjustStack do
part of it and ABI_AlignStack the rest, causing unnecessary subtract
instructions on Linux x86 (only).
As part of that, change SafeLoadToEAX to SafeLoadToReg, and have JitIL
use that, which should fix fastmem on JitIL.
This should also fix a potential stack corruption issue with x86.
Also define _M_* in a common location, and clean up code that these
changes break (including DSPJit files that assume X86 yet are compiled
on ARM for some reason...)
- For GCC, use intrinsics that will work on ARM.
- Add AtomicExchangeAcquire.
- Make Atomic{Load,LoadAcquire,Store,StoreRelease} work for any suitable type.
- Call ABI_AlignStack even on x86-64.
- Have ABI_AlignStack respect the difference in current alignment
between the root JIT function, which has a prolog, and
ProtectFunction thunks, which do not. This was causing many games
to crash on start on OS X. Since this might otherwise mean changing
the stack pointer before every call...
- Have one prolog/epilog function rather than two (one of which
definitely did not do what it was thought to do), and make it
actually work like a normal one, so that the stack frame shows up
properly in the debugger. There should be no performance impact.
Changes a lot of parsing code which previously was not aware of the notion of
key/value, and operated only with raw lines. Now key/value is the default and
lines are handled as raw only if they do not contain =, or they start with $ or
+ (for Gecko/AR compatibility).
It isn't easily accessible with sigaction or Mach exceptions (well,
requires an additional system call in the latter), and isn't necessary.
(and get rid of the enum, because it's only used once, and the comments
are more expressive than enum names)
MSVC insisted on using a copy assignment where a move was intended and
ought to be used. This would have been caught, because the class in
question inherits from NonCopyable, which declares a move assignment
operator, which is supposed to delete the implicitly declared copy
assignment operator, but of course MSVC didn't do that either, causing a
class that should have been safe to be unsafe.
(Intertwined enough that's it's easier to do in one patch.)
(1) /dev/es did not support state save, which could cause crashes and
incorrect behavior after loading.
(2) NANDContentLoader tried to read all of a title's contents into
memory when it was first opened. Two issues:
- If any contents were missing, it bailed out. However, with DLC,
only some of the contents may be downloaded, as determined by the
permission bits in the ticket. Instead, return an appropriate error
when a content is accessed that doesn't exist on the filesystem
(don't bother checking the permission bits though).
- Everything was loaded into memory - even if it consisted of 3 GB of
songs, which caused Dolphin to lag out for quite a while (and would
fail on 32-bit). Instead, open content on demand.
This is required to be able to move objects that inherit from it.
(Note that this patch also #ifs out the class for the externals that
include it yet are compiled in pre-C++11 mode. It shouldn't matter,
since those externals don't use it.)
It's not enough to check for the CPUID bit to know if AVX is supported since
AVX requires OS support (new set of registers == more registers to be saved
when context switching). If the OS does not support, the cpuid bit will still
be set but using YMM registers will cause an illegal exception fault.
The MS INI parser and most other INI parsing libraries APIs only support
comments at the beginning of lines. Right now, some Game INI files use sections
like:
[OnFrame]#Add memory patches here
But these section headers are parsed separately, so this should not break
them.
This reverts commit 7aae9ccbc0.
Reasons:
- no test results have been provided to prove the usefulness of the patch
- broken coding style
- the author hasn't replied to any criticism
Also, some tab/space mismatches removed from VideoOGL, and some places I missed in VideoDX[number] projects.
Now, the Core is literally the only project with tab/space mismatches (on a large scale).
Probably better to keep that same-register-MOV assert useful. Also,
explicit type extension documents whats happening.
Internally, this boils down to the original MOV, but without the assert.
This commit mainly elaborates on some messages a little more. Also fixes some typos that slipped through the last commit.
A large change in text can be seen in EXI_DeviceMemoryCard.cpp. I added more info as to why a write to a memory card may fail. (This actually was a reason I was unable to write to a memcard recently).
Elaborations can be seen in WGL.cpp
I did change some comments in some files that I was correcting logging messages in, however this is only if I spot a typo or if an abbreviation is lower-cased. Even in that case, the amount of changes done to comments is very minimal.
# By Ryan Houdek (185) and others
# Via degasus (12) and others
* master: (625 commits)
Revert "Don't open/close file for every file operation." as it was crashing PokePark in Windows builds.
Array overrun fixed in VertexShaderCache for the DX11 plugin.
Fixed DSPTool build.
Windows build fix
Go back to assuming every HID device is a wiimote on Windows. Fixed issue 6117. Unfixed issue 6031.
VideoSoftware: Improve fog range adjustment by using less magic and more comments.
revert RasterFont for VideoSoftware
ogl: fix virtual xfb
Windows build fix from web interface...
Adjusted the audio loop criteria, using >= on the Wii and == on GC. This fixes the audio static that occurred in Wii games after hours of play.
Forced the exception check only for ARAM DMA transfers. Removed the Eternal Darkness boot hack and replaced it with an exception check.
VideoSoftware: Implement fog range adjustment, fixing issue 6147.
implement 4xSSAA for OGL
move ogl-only settings into backend
Fix description of disable fog, and move it to enhancements tab.
Reverted rd76ca5783743 as it was made obsolete by r1d550f4496e4.
Removed the tracking of the FIFO Writes as it was made obsolete by r1d550f4496e4.
Forced the external exception check to occur sooner by changing the downcount.
Mark the Direct3D9 backend deprecated.
Prefer D3D11 and OpenGL over D3D9 by default.
...
Conflicts:
CMakeLists.txt
Source/Core/Common/Common.vcxproj.filters
Source/Core/Common/Src/CommonPaths.h
Source/Core/Core/Core.vcxproj.filters
Source/Core/Core/Src/Core.cpp
Source/Core/Core/Src/IPC_HLE/WII_IPC_HLE_Device_FileIO.cpp
Source/VSProps/Dolphin.Win32.props
Source/VSProps/Dolphin.x64.props
Some cleanup throughout related code. (try to make logic in ISOFile understandable by a human)
Encode strings in UTF-8 rather than somehow trying to determine the encoding in the GUI code.
Non-windows OSes temporarily broken.
The real file was never kept open for longer than a single operation so there was no point in dealing with it in DoState.
Saving the real path in the savestate was also probably a bad idea. Savestates should be a bit more portable now.
* OpenAL:
Changed SoundTouch to use float samples, allowing SSE to be used. Made the DPL2 decoder disabled by default. Re-added the audio hack used by the Accurate VBeam emulation option.
Added a latency setting to the audio settings. Removed the Sample Rate setting. It is now hardcoded to 48000hz (accurate audio timing).
Skipped timestretching if the emulator is running below 10% speed to prevent buffer overflows.
Removed the synchronisation between the CPU thread and the audio thread. Added code to detect and resume from buffer underruns. Disabled the ability to change the DPL2 option after the game has started. Fixed a memory leak that occurred in the DPL2 decoder. Fixed the OSX build.
Build fix
Added a Dolby Pro Logic II (DPL2) decoder in the OpenAL backend. DPL2 audio is decoded to 5.1. Code adapted from ffdshow. Added an option in the DSP settings to disable the DPL2 decoder in case Dolphin incorrectly detects a 5.1 audio system. Updated the OpenAL files to OpenAL Soft 1.15.1 in the Windows build.
Removed the system timing hack which was activated when the Accurate VBeam option was enabled.
Fixed the include directories in Audio Common for the Windows 32bit build.
Fixed the include directories in Audio Common for the Windows build.
Messed up the static include line
Fix include paths and compiling in Linux. Externals soundtouch is 1.7.1, while Ubuntu 12.10 is 1.6.x. Externals soundtouch is compiled with integer samples, while ubuntu is compiled with float samples. Float samples is probably the more common route. If you're going to use soundtouch, you should probably use SAMPLETYPE instead of explicitly choosing short. This probably breaks the windows build since its includes aren't setup.
OSX: typedef signed char BOOL
OSX build fix
Build fix
Added audio time stretching by using the SoundTouch library.
Implemented correct audio timing.
OpenAL for Windows initial commit
Also changed the size parameter from DoVoid to size_t. As far as I know, that should never be negative.
Also changed the the count parameter of DoArray to size_t, this also should never be negative.
Got rid of some typecasts.
Depth calculations are always done in the pixel shader now.
Due to the unpredictability of our zcomploc hacks this commit probably changes the behavior of some games which use zcomploc.
- In icon retrieving I removed the "format check" as it shouldn't really matter to have mixed icon formats. Also removed the "Time splitters hack" as there's no reason for it since we are only checking the last 3 bits and I'm pretty sure having bits 1 and 2 set is the same as having them unset.
- Icon retrieving uses AnimSpeed as stop signal (every icon must have an speed set, the first speed that is 0 means there are no more icons)
- Also, in icon retrieving I added support for "blank frames"(Luigi's Mansion and Pikmin that I know of). With this the base for icon animation is complete.
- Fixed PSOIII savegame patch which was wrong before.
Signed-off-by: LPFaint99 <lpfaint99@gmail.com>
Reason:
- It's wrong, zcomploc can't be emulated perfectly in HW backends without severely impacting performance.
- It provides virtually no advantages over the previous hack while introducing lots of code.
- There is a better alternative: If people insist on having some sort of valid zcomploc emulation, I suggest rendering each primitive separately while using a _clean_ dual-pass approach to emulate zcomploc.
This reverts commit 0efd4e5c29.
This reverts commit b4ec836aca.
This reverts commit bb4c9e2205.
This reverts commit 146b02615c.
the intent is to replace the haphazard scheduling and finger-crossing associated with saving/loading with the correct and minimal necessary wait for each thread to reach a known safe location before commencing the savestate operation, and for any already-paused components to not need to be resumed to do so.
* misc-speedups:
fixed and reenabled and slightly optimized the JIT version of fcmpo/fcmpu.
slightly more precise speed percent display (this is really minor)
a small thread synchronization speedup for dual core mode. it's most noticeable in games where the CPU is running behind compared to the GPU.
Conflicts:
Source/Core/Core/Src/PowerPC/Jit64/Jit.cpp
The Fifo.cpp changes from rdaefb3b550e2 was not merged as there was no performance benefit.
please test for regressions, speed and for other issues fixed, as a example, the black color in water splash in super mario galaxy are fixed with this rev.
please as soon as yo find a bug let me know.
a little code cleaning to avoid duplicated execution of AlphaPreTest and a little correction to some comments from the previous commits.
this change must behave exactly like last revision, if something is broken please let me know
to marcosvitali.
Added an external exception check when the CPU writes to the FIFO. This allows
the CPU time to service FIFO overflows. Fixes random hangs caused by FIFO
overflows and desyncs like in "The Last Story" and "Battalion Wars 2". Thanks
to marcosvitali for the research.
Added some code to unlink invalidated blocks so that the recompiled block can be
linked (speed-up).
This release still fixed the hangs produced by fifo overflow without sacrifice
performance. For example you can test Tutorial moves at the beginning of The last history now
is fluid 30/60.
Fixed possibles random hangs in DC mode.
Fixed hangs in DC mode in (Simpsons, Monkey Island, Pokemon XD, etc)
Implemented accurate management of Pixel Engine Interrupts. Now the GPU loop
is stopped when a PE Interrupt needs to be managed and resumed when Pixel Engine
finish.
Fixed Metroid Prime 3 and 2 desync. And other games with desync because of
FIFO Reset. That happens because FIFO_RW_DISTANCE_HI must be written first, for checking
fifo.CPReadWriteDistance == 0, so some fifo resets was not managed in the right
way.
Fixed Super Monkey Ball in some cases when the game write the
WriteReadDistance need to be safe like the SafeCPRead.
Improved the CheckException for the GatherPipe writes in JIT, now only the
External Exceptions are processed.
Fixed definitely Pokemon XD in dual core mode. This game is doing something
not allowed. It attach to CPU the same fifo attached to the GPU in multibuffer
mode. I added a check to prevent overwrite the GPU FIFO with the CPU FIFO. If
the game do that on breakpoint the solution can fail.
Fixed ReadWriteDistance calc when CPRead > CPWrite.
Added Token and Finish cause to GP Jit checking.
Additional cleanup in CommandProcessor.
Fixes issue 5209
Fixes issue 5055
Fixes issue 4889
Fixes issue 4061
Fixes issue 4010
Fixes issue 3902
For example you can test Tutorial moves at the beginning of The last history now is fluid 30/60.
Shuffle2: I've delete the hacky line, I think is not necessary anymore. Additional some clean in CommandProcessor.
Please test The Last Story and others games affected in the previous commits and give me a feedback.
To use the native code handler, place the kenobiwii.bin file into the Sys directory. Dolphin will silently fall-back to the emulated code handler if the file is not there.
Fixes issue 4561.
Use the clobber list instead of the stack to save rbx when executing the cpuid
instruction with inline assembly. This avoids breaking GCC assumptions about
the stack pointer location.
more specifically: if the emulator stops unexpectedly, it is quite possible that one of the shader cache files will have some bytes near the end that never got their values filled in. this change adds an index number at the end of each entry as extra verification that the entry is valid, so that invalid entries can be ignored (and eventually overwritten) instead of causing crashes.
This should make it so if you try to load an incompatible save, it simply doesn't load, instead of crashing dolphin. (I can't guarantee no crash but it's much less likely now)
The code from 748be364e5 incorrectly accepted -0x100000000 on x86_64.
Also if ERANGE is returned by strtoul(), reject the parsed value regardless
of what that value is. This fixes invalid values being returned when compiling
with Visual C++. Thanks to "cotton" for testing this.
On x86-64, "unsigned long" is 64 bits wide, so it is possible for a number
to not trigger a range error on strtoul() but still not fit inside an u32.
An extra check is added to ensure that 32-bit and 64-bit builds will accept
the same numbers.
Passing MAP_FIXED to mmap causes already mapped pages in the requested
region to be replaced. On Mac OS X this caused pages for JIT-generatd
code to appear in the memory range previously auto-allocated for the RAM
of the emulated machine. This led to a hang at boot time. The same problem
can probably occur on FreeBSD, but not on Linux since MAP_32BIT is used
there instead of MAP_FIXED.
The solution is to not use MAP_FIXED, but instead rely on the OS honoring
the hinted address which is below 4 GB: we don't need an exact match,
just a low address.
hopefully this will be the last code change committed directly to master for a while... :/
next is cmake to replace scons on osx hopefully. pointers anyone? (soren?)
Also fix the wxMessageAlert called from non-gui threads in the WXGTK build to use the passed caption.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7678 8ced0084-cf51-0410-be5f-012b33b47a6e
This is mostly useful for removing SHLs by constant 1, 2, 3, which this
commit implements in one place.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7652 8ced0084-cf51-0410-be5f-012b33b47a6e
Removes the ugliness that was the portable file, and now creating a shortcut or file association is less of a pain
it is still necessary to modify the file association from ".../dolphin.exe" "%1" to ".../dolphin.exe" /e "%1"
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7593 8ced0084-cf51-0410-be5f-012b33b47a6e
when nand root is changed the current sysconf is saved,
and the sysconf in the new location is either loaded (if exists)
or the default sysconf is created
wii menu item is updated when the root changes
small fix to saving gamelist paths to .ini paths that are removed from the gui are now removed from the ini instead of simply changing the number of paths
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7555 8ced0084-cf51-0410-be5f-012b33b47a6e
add ticket to CNANDContentLoader
move wad installer to CNANDContentManager
system menu can now be launched from a wad file without being installed first, (return to system menu from another title will still only work if system menu is installed)
cdb.vff: flushed to disc immediately, creates if the file exists but is too small, moved creation to Boot_WiiWad
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7530 8ced0084-cf51-0410-be5f-012b33b47a6e
we already copy the file to memory here, now we also copy the file to
1/2/data/
This should really fix issue 4287.
Thanks to hosigumayuugi for finding the exact cause of the issue
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7521 8ced0084-cf51-0410-be5f-012b33b47a6e
- Removed recent ghanges about separate per-game Video Settings
- Added "One Window 3-State Support" (very close to full implementation)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7391 8ced0084-cf51-0410-be5f-012b33b47a6e
With wxWidgets 2.9.2 now in Externals, SCons was the only
external dependency other than Xcode and building just SCons
from Macports caused a fair mount of extra stuff to be built
unnecessarily, so just include a copy of scons-local.
Always build wxWidgets from Externals which allows us to get
rid of the home-grown autoconf machinery in SconsTests.
The main use case for args.cache was the wxconfig option,
which is no longer relevant after the above changes and
caching options has a lot of potential for confusion,
especially since other build systems don't tend to do this,
so we no longer do it now.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7381 8ced0084-cf51-0410-be5f-012b33b47a6e
+ minor GUI adjustements, CPUID Detect cleanup... video profile selection is disabled if a game is running
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7302 8ced0084-cf51-0410-be5f-012b33b47a6e
Second:
A experiment. implemented parallelization in texture decoding using openmp. is most a experiment to test the performance in different os/plataforms. in my system (windows x64 amd 1055t) give a speedup in large textures, but i tested in in intel dual core and gives a slowdown. o i limited the use for large textures and cpus with more than 3 cores.
please test an let me know if it improves or degrades the speed.
please for linux and osx user. to enable this you will have to enable your compiler support for openmp to test this code.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7284 8ced0084-cf51-0410-be5f-012b33b47a6e
Also change the for loops in SysConf to use iterators to placate godisgovernment and billiard. :P
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7283 8ced0084-cf51-0410-be5f-012b33b47a6e
in windows sleep(0) behaves more like what is defined in the yield instruction so use it instead. In my amd 6 core system brings a nice 8% speedup so please test I'm interested in knowing the behavior in different systems.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7261 8ced0084-cf51-0410-be5f-012b33b47a6e
some code additions for future use ;).
please gcc user test this as i don't have opportunity to test it myself i only use reference code to.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7247 8ced0084-cf51-0410-be5f-012b33b47a6e
on FreeBSD and Linux when building with clang.
I think it would be best to only use wxWidgets for localization.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7207 8ced0084-cf51-0410-be5f-012b33b47a6e
In addition protect against their use on 32 bit and the use of [ABCD]H
together with a REX prefix on 64 bit.
This assumes that the customOp parameter of WriteREX and operandReg of
OpArg always are registers, and thus needs to give something valid to
WriteREX when that is not the case (WriteShift).
In addition to the patch i sent to the ML, there are a few changes to the
error reporting(mostly whitespace).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7202 8ced0084-cf51-0410-be5f-012b33b47a6e
- ReImplementing Single Core Mode like Dual Core Mode Style.
- Stage 1: My goal is, we have the Fifo, CommandProccessor code the more clear, maintenible and documented possible. When I quit dolphin I want any developer can continue with the work only reading the code.
* Big Refactoring: A lot of functions was changed the names, and modularized.
Now the FifoLoop and CatchUpGPU does not exist, was replaced by RunGpu() and RunGpuLoop().
The general idea is modeling the code like the real HW. The fifo is only a buffer where the Write Gather Pipe write the commands and from the Graphic Processor read these.
* Big Clean UP a lot of obsolete code and comments was deleted, like DcFakeWachDog, "Fifo very soon hack", etc.
In the stage 2, I will refactoring more code doing emphasis in the division of CommandProcessor, Fifo, Gpu Emulation. Beside I will comment all functions and variables in the code (Don't worry I will ask for English help for this part ;) )
Please test a lot SC mode and DC mode :)
Thank you so much for testing always and the patience. I don't like broke your favorite game but... you must believe me this part is very sensible, I only try to contribute for have a better and stable dolphin emulator.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7185 8ced0084-cf51-0410-be5f-012b33b47a6e
Things break if both a shared and static libpng are linked
in, presumably because it has some global state. Several of
the gtk-ish libraries often, but not always, link in libpng
transitively, so it is important that we find it ourselves
first, even if it is not in the linker's search path.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7178 8ced0084-cf51-0410-be5f-012b33b47a6e
This allows ALL settings in the gfx configuration dialog to be adjusted _per game_ in a more user-friendly way than before.
Obsoletes the gfx related options in the ISO properties, but I kept those since the configuration profiles use different ini file keys (i.e. convert the game inis to the new naming, please!).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7167 8ced0084-cf51-0410-be5f-012b33b47a6e
- This game read the CPRead pointer when the GP is processing data and after detach the fifo and attach again an use this pointer for continue, so implement fifo.SafeCPReadPointer pointer.
- fifo.SafeCPReadPointer is updated when (FAKE_GetFifoEndPtr() - g_pVideoData) == 0) to have a pointer without GFX Commands Cut in the beginning of 32 block.
- Reset video buffer when the CPReadWriteDistance is written by the software.
- This commit is experimental please test a lot your games.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7165 8ced0084-cf51-0410-be5f-012b33b47a6e
- In the Command Processor Control Register when GPReadEnable is OFF, wait until the fifo lopp finish with thi actual 32 bytes block. This is necessary to have Safe Disabble GP Read in this way AbortFrame is performed by the software, beside this can help to have accurate GPReadEnable OFF.
Please test Metroid Prime 1/2, Guilty Gear XX, X men gc, SMG, and shuffle you can test Harry Potter Prince for WII. :)
PD: The fifo code need a clean very soon.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7158 8ced0084-cf51-0410-be5f-012b33b47a6e
Looks like compilers tend to use EBX for parameters if not told otherwise and
don't bother to update SP in leaf functions, so PUSH/POP kill local variables.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7151 8ced0084-cf51-0410-be5f-012b33b47a6e
I think that isFifoBusy bring better sync with VI (video interface) because the CPU emulated threads are waiting for DrawDone in BP Register. So, I do some modifications.
1) Rename "IsFifoBusy" by "isPossibleWaitingSetDrawDone"
2) Only activate isPossibleWaitingSetDrawDone when bFF_GPLinkEnable is true in fifo loop "Inmediate mode" that is because in theory this drawsync function is using in this mode.
3) Deactivate isPossibleWaitingSetDrawDone also in SetFinish in PixelEngine, beside when 32 block is finish.
Please regression in yours games thats can bring some FPS more above all with VPS frame limiter ON (Auto, 60, 50, etc).
- Fix waiting in AbortFrame(), please test mp1/mp2 is fixed again.
Good look!
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7123 8ced0084-cf51-0410-be5f-012b33b47a6e
buildfix
move much of the build settings to .props files
-please use them as much as possible in the future, instead of changing individual projects
NOTE: to avoid left over blobs, clean your builds *before* applying these changes.
TODO: add DebugFast target for projects that are lacking it. Lack of DebugFast targets cause the linker to use LTCG when we don't want it.
please test for regressions which could be caused by being too happy with compiler flags :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7109 8ced0084-cf51-0410-be5f-012b33b47a6e
- Added full ability to recognize true Intel HTT CPU capability (support to discriminate Intel Core 2 Duo...)
- Attempt to fix a register trashing (issue 4022 generally, linux and mac systems)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7097 8ced0084-cf51-0410-be5f-012b33b47a6e
problems, whole functions in .h files need to also be static in
case they are included in several .cpp files.
Also a few other minor LTO fixes.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7082 8ced0084-cf51-0410-be5f-012b33b47a6e
Changed non-hi-res textures to use MurmurHash3, which has better performance that the previous hash.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7080 8ced0084-cf51-0410-be5f-012b33b47a6e
Re-fixed custom textures higher than 1024x1024. (It must have accidentally got reverted somewhere during the video plugin merge)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7064 8ced0084-cf51-0410-be5f-012b33b47a6e
and just operate on lists of object files instead.
This helps with LTO since LLVM/clang LTO is completely broken
by static libraries. It also helps identify symbol clashes
between components like the former plugins.
Many linkers also expect static libraries to form a strict DAG
which turns out be a difficult rule to uphold in practice,
especially since some of our platforms aren't picky about this.
LTO builds currently appears to crash at runtime because of
the static wx libs.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7056 8ced0084-cf51-0410-be5f-012b33b47a6e
fix all build targets (they've all built here - you may have to manually delete the intermediate directories if you have conflicts after this commit).
set the debug path to $(TargetDir)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7022 8ced0084-cf51-0410-be5f-012b33b47a6e
Fix some debugger issues. Still need to get sound window working, but the invalid id panic alert is fixed.
Also, a ";" as a comment in an ini file is now only allowed at the beginning of a line. The debugger has settings strings with semicolons in them. That completely broke the debugger.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6989 8ced0084-cf51-0410-be5f-012b33b47a6e
- dislocating all sensible stuff related to "values per game/pattern" outside the sourcecode.
- giving more control to end-users across the user-friendly interface.
- deleting/cleaning some dead variables.
- updating all gameconfig.ini data to reflect new PHack concept (pending upload).
* Updated Italian translation
- Includes corrections, a better strings translating and suggestions directly by Google Code's people.
+ Minor old pending changes...
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6973 8ced0084-cf51-0410-be5f-012b33b47a6e
This makes the OS X build more robust and should help pave the
way for the integration of the video plugins as well as LTO.
There are now no more global class level namespace conflicts left,
as evidenced by the fact that Dolphin can be linked with -all_load,
not that you would want to.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6958 8ced0084-cf51-0410-be5f-012b33b47a6e
This WILL temporarily break the Linux and MacOSX builds but should be easy to fix.
Things left to do:
* The UI on the new Audio tab for the LLE/HLE choice is ugly
* At times the code still look "plugin-y" and needs cleanup
* The two plugins should be merged further. DSPHLE should use the emulated memory etc of DSPLLE as much as possible, so that simply saving the DSPLLE state is enough. This would also bring the possibility of savestate compatibility between the two plugins.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6947 8ced0084-cf51-0410-be5f-012b33b47a6e
some optimization for vertex color loading, please test for any change in game color, this is a optimization so nothing should change :)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6908 8ced0084-cf51-0410-be5f-012b33b47a6e
work around the limitations of the no longer maintained Xcode 3.1.4
for Leopard. Running a 10.6-built app on 10.5 works fine through
through the use of the 10.5 SDK.
std::locale() seems to be the generally safer way to specify the
default locale and works on Linux and OS X at least. Thanks to
dasmetzelmaennchen for the pointer.
Remove some obsolete SCons related svn:ignores.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6893 8ced0084-cf51-0410-be5f-012b33b47a6e
'#' is a fairly accepted comment character for .ini files along with
the more official ';', but '//' isn't.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6872 8ced0084-cf51-0410-be5f-012b33b47a6e
Set up an exit(3) task to shut down real wiimotes. This shouldn't
really be necessary, but we do currently handle a number of error
conditions by calling exit(3).
Retire the inputuicommon library.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6852 8ced0084-cf51-0410-be5f-012b33b47a6e
stacks), addition of a register cache(currently accumulators on 64bit only).
It feels a bit slower, but the numbers are about the same.
Caching accumulators doesn't change speed either.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6848 8ced0084-cf51-0410-be5f-012b33b47a6e
Fixes issue 3913.
The underlying problem, however, is that PanicAlert GUI popups
are broken on 32-bit Linux. I haven't looked into why that is.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6836 8ced0084-cf51-0410-be5f-012b33b47a6e
Add Hungarian translations by Delirious.
Update Italian translations by RebuMan.
Update German translations by JackyCola and LucasX.
Update Greek translations by Gpower2.
Update Frensh translations by Pascal.
Make sure the game list is refreshed when the GC language is changed.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6826 8ced0084-cf51-0410-be5f-012b33b47a6e
in the title bar. It is more usefully displayed using the overlay
and long pathnames are not suitable for title bars and probably not
even safe depending on the underlying windowing system.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6817 8ced0084-cf51-0410-be5f-012b33b47a6e
Placing the render window at position 0,0 makes it unmovable on OS X.
Use the conventional r1234 format for SVN revision numbers.
Delete mis-copied .svn directories from the application bundle.
Only warn about a failed low-memory allocation if one was requested.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6811 8ced0084-cf51-0410-be5f-012b33b47a6e
Make pthreads linkage precise for the nowx build. Fixes issue 3875.
Fall back to pkg-config for gtk+-2.0 if cmake is version 2.8.2. That version has a bug that doesn't detect gdk-pixbuf-2.0.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6810 8ced0084-cf51-0410-be5f-012b33b47a6e
- add support for precompiled headers with MSVC
- compile with _FILE_OFFSET_BITS=64 and _LARGEFILE_SOURCE only for our sources, some dependencies seem to have problems with it enabled...
- disable -Wall for MSVC too prevent warning flood
- rename aes_cbc.c and aes_core.c to cpp files since it makes stuff a lot easier and there's really no reason not to do it since they had been compiled as C++ before anyway
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6797 8ced0084-cf51-0410-be5f-012b33b47a6e
Even with LoadStorePaired accounted for, there are still some
niggling 64-bit cleanliness bugs left that are not practical
to weed out on a single platform. We should probably have an
option to use >2GB memory only on all platforms for debugging.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6792 8ced0084-cf51-0410-be5f-012b33b47a6e
please test for regressions and fixes.
some little changes to make pixel shader more dx9 sm2.0 friendly. the condition is not to use pixel lighting ( sorry no hardware support for the quantity of parameters needed).
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6777 8ced0084-cf51-0410-be5f-012b33b47a6e
the private SVN_REV_STR which relies on finicky build mechanics.
With SCons, kill the old svnrev.h in Source if still present.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6715 8ced0084-cf51-0410-be5f-012b33b47a6e
(acc and ax) and product register with one read/write.
Gives a minuscule speedup of not more than 4%. In exchange, breaks all
your out-of-tree changes to dsp. Tests are not building again, yet.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6680 8ced0084-cf51-0410-be5f-012b33b47a6e
assembler for JIT. Replace JIT ToMask() with a different variant. Remove
superfluous zeroWriteBackLog calls(added by me).
Core/Common: Don't bother creating a string and calling into a Logs trigger()
when there is noone listening. Change AtomicLoadAcquire for gcc to just
make the compiler not reorder memory accesses around it instead of doing
a full memory barrier, per the comment in the win32 variant.
Core/AudioCommon: Fix a use of uninitialized variable inside libalsa.
Microbenchmarking results for ToMask variants:(1 000 000 000 iterations):
cpu\variant| shifts | bit scan
intel mobile C2D@2.5GHz | 5.5s | 4.0s
amd athlon64x2@3GHz | 6.1s | 6.4s
(including some constant overhead identical to both variants)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6667 8ced0084-cf51-0410-be5f-012b33b47a6e
on OS X as on other Unices so OS X initial installs aren't so easily
broken by files being created in constructors.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6661 8ced0084-cf51-0410-be5f-012b33b47a6e
wiimote bd's are now read from (or added to if < 4 exist) SysConf
in theory you should be able to use any valid sysconf file now,
but i would advise against using a dolphin edited SysConf on a wii
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6646 8ced0084-cf51-0410-be5f-012b33b47a6e
* change File::GetSize to fetch the size directly from the open file instead
of stat'ing it when challed with a FILE*
* use changed File::GetSize(FILE *f) instead of calling with file name in two
places
* remove "seek_pos % file_size" hack for ZTP, so one can seek to the end of
file again. Please check Zelda: Twilight Princess for regressions
* return error codes when reading or writing from/to a file
A lot of those changes are from j4ck.fr0st, so kudos to him.
I did not change the file open mode for ISFS_OPEN_WRITE to "wb". While that
would probably be more correct, it says in the comment that it might affect
Mario Kart Wii. I would prefer somebody with that game try that change
locally first.
Please check your games for regressions (or even improvement). Some games that
may be affected are Zelda - Twilight Princess and Metroid Prime 3.
Fixes issue 1749
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6634 8ced0084-cf51-0410-be5f-012b33b47a6e
(probably nobody else cares, but I need at least one video plugin that actually works on this computer)
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6618 8ced0084-cf51-0410-be5f-012b33b47a6e
on any other, including "" when a different one is specified through the
POSIX locale environment variables.
This is not normally a problem since these variables are stripped out from
the environment when an application is launched by the Finder. This is not
the case when running the binary directly from the command line, such as
when debugging.
I have temporarily disabled the use of std::locale("") on OS X while I try
to come up with a better solution.
Fixes issue 3598.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6615 8ced0084-cf51-0410-be5f-012b33b47a6e
To do so I had to re-add the casting bloat removed in revision 6102. Also, for some odd reason the NVidia OpenCL drivers don't like 8 bit rotations, but are okay with 2, 4 bit rotations. These are apparently bugs in the NVidia drivers that are hopefully fixed in future versions.
Also, on linux make sure the TextureDecoder.cl file is copied from the shared data directory to the users directory.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6611 8ced0084-cf51-0410-be5f-012b33b47a6e
* More formats recognition for "Clear Screen" step. Improved the ability handling the alpha channel (% color translucency).
* Related to CPUID detecting:
- Added support displaying correct SysInfo for recent multicore Intel CPUs x86-64 with HT/SMT (Core i3/i5/i7 and Xeon) based on Nehalem architecture.
+ minor and passive changes.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6604 8ced0084-cf51-0410-be5f-012b33b47a6e
Ryan Houdek
