Previously we wouldn't indicate if saving or loading these files
happened to fail. In some cases we'd only print out to the logger, but
this is a pretty poor way to tell a user of the interface that something
went wrong in a direct way (the logging messages aren't able to be localized
either).
This packet is only used by the host to detect desyncs, and we don't really need to know the exact frame we desynced on (unless you're debugging, but you can just recompile for that), so it's perfectly fine to just send it less often. This makes it so the timebase packet is sent only every 60 frames, rather than every frame, which further cuts back on unnecessary bandwidth consumption.
PowerPCState's cr_val member is an array of u64s, so we can just use the
correct printf macro specifier within cinttypes. This also avoids
truncation on operating systems that use an LLP64 data model (like
Windows), where long is actually 32 bits in size, not 64-bit, which
could result in wonky values being printed, should Trace ever be used on
it.
define how many frames constitute a high or a low swing/shake when the
button is down. Also configurable is the number of frames to execute
the swing/shake after the button is released.
When disabled only inputs from TAS dialog are used.
When enabled inputs from TAS dialog are used, except when a change in
input is detected from a real controller, in this case the TAS value is
replaced with the real controller value.
Previously there was only one function under the NetPlay namespace,
which is kind of silly considering we have all of these other types
and functions existing outside of the namespace.
This moves the rest of them into the namespace.
This gets some general names, like Player, for example, out of the global namespace.
Works around a bug in QtCore that will cause crashes when
QFileSystemWatcher::addPath is called on a directory that is located on a
removable device (USB mass storage devices, etc.)
This should make the NetPlay dialog appear as a separate window in the taskbar on most systems, which makes more sense than a parented dialog as the user will leave it open for an extended period.
We want this setting to invalidate the cache because it may affect the appearance of textures in the rendered scene, therefore one would expect changing it while the game is running to have the expected effect immediately.
Initializing GraphicsWindow layout & children requires cooperation from
the graphics stack: on my system, for example, it causes a Vulkan
context to get created in order to get driver info. This is a slow
operation, and right now it is taking about 60-70% of the Dolphin
startup time on my system.
Move instead to a lazy-initialization model where the constructor
does nothing, instead offloading work to a separate Initialize() method
called before the window is shown.
I would expect this should be done for other larger parts of the UI,
especially the ones where creating widgets ends up triggering large IO
subsystems (I suspect controller configuration might be doing that).
(I'm not super happy with how this is implemented, but right now it's a
one-off, and it's a major complaint users have with the new UI. I
prioritized getting something working quickly...)
Now the detection heuristic has changed, the old value is no longer
valid.
Some example thresholds for known mipmap effects that should trigger:
SMG's lava has a mimimum difference of ~17.8, SMG2's clouds have a
minimum difference of ~14.8, and Wind Waker's foam has a minimum
difference of ~15
Non-triggering examples were tested and all had a calculated difference
lower than 3.
So a value of 14 should lean towards false-negatives instead of
positives, but this is clearly incomplete testing and may require
further tweaks later.
This no longer converts from sRGB to linear for the reference mip
downsample - even if the original mipmap creation tool used an sRGB
colorspace (which isn't really guaranteed, and may even change per
game), this is a "fast" heuristic that's only an estimate anyway.
The average diff is also now stored in a u64, avoiding floating point
calculations in the per-pixel hot loop.
This should speed up the detection significantly, hopefully fixing
jank when loading in new textures.
Normally, SI is polled at a rate defined by the game, and we have to send the pad state to other clients on every poll or else we'll desync. This can result in fairly high bandwidth usage, especially with multiple controllers, mostly due to UDP/IP overhead.
This change introduces an option to reduce the SI poll rate to once per frame, which may introduce up to one frame of additional latency, but will reduce bandwidth usage substantially, which is useful for users on very slow internet connections.
Polling SI less frequently than the game asked for did not seem to cause any problems in my testing, so this should be perfectly safe to do.
Given we now use a base class for the interface, we can make all member
functions, types and constants that aren't directly related to
instructions private.
HID2.LSQE is the Load/store quantize enable bit for non-indexed format
instructions (which are psq_l, psq_lu, psq_st, and psq_stu). If this bit
is not set and any of these instructions are attempted to be executed,
then a program exception is supposed to occur.
This register is defined as "optional reserved" within the aarch64 ABI.
Linux doesn't use it, but we must not modify it on ios or windows.
As we have plenty of registers on aarch64, let's just always skip this one.
This function was duplicated across all the opcode tables: the main info
tables, the interpreter tables, and the x86-64 JIT tables. However, we
can just make the type of the std::array parameter a template type and
get rid of this duplication.
const on a parameter being passed by value in a prototype doesn't actually signify
anything, these are only applicable in the definition, where they make
the opcode parameter immutable.
inline has external linkage, which doesn't really make sense here, given
the function is only used within this translation unit. So we can
replace inline with static.
While we're at it, the code within the function can also be compressed
to a single return statement.
Previously these were required to be built into the executable so that
the JIT portion of the DSP code would build properly, as the
x86-64-specifics were tightly coupled to the DSP common code. As this is
no longer the case, this is no longer necessary.
This adds a base class that is used to replace the concrete instance of
the x64 JIT pointer within DSPCore. This fully removes the direct use
(read: non-ifdefed) usage of x86-64-specifics within the main DSP code.
Said base can also be used for creating JITs for other architectures,
such as AArch64, etc.
This is one of the last things that needed to be done in order to
finally separate the x86-64-specific code from the rest of the common
DSP code. This splits the tables up similar to how it's currently done
for the PowerPC CPU tables.
Now, the tables are split up and within their own relevant source files,
so the main table within the common DSP code acts as the "info" table
that provides specifics about a particular instruction, while the other
tables contain the actual instruction.
With this out of the way, all that's left is to make a general base for
the emitters and we can then replace the x64 JIT pointer in DSPCore with
it, getting all x64 out of the common code once and for all.
While shuffling all the code around, the removal of the DSPEmitter
includes in some places uncovered indirect inclusions, so this also
fixes those as well.
Despite both being documented as read-only registers, only one of them
is truly read-only. An mtspr to HID1 will steamroll bits 0-4 with
bits 0-4 of whatever value is currently in the source register, the rest
of the bits are not modified as bits 5-31 are considered reserved, so
these ignore writes to them.
PVR on the other hand, is truly a read-only register. Attempts to write
to it don't modify the value within it, so we model this behavior.
This makes it much more straightforward to access WiimoteDevice
instances and also keeps the implementation details of accessing those
instances in one spot.
Given as all external accesses to the WiimoteDevice instances go through
this function, we can make the other two private.
Using reinterpret_cast (or a C-styled equivalent) to reinterpret
integers as floating-point values and vice-versa invokes undefined
behavior. Instead, use BitCast, which does this in a well-defined
manner.
According to PEM 3.3.6.1, if a division by zero occurs and FPSCR.ZE is
set, then the result of the instruction operation is unchanged (see
table 3-13). Similarly, if an invalid operation occurs and FPSCR.VE is
set, then the destination should also remain unchanged (see table 3-12).
Hardware also matches this behavior.
We were handling this for other relevant instructions, but we weren't
doing so for the arithmetic instructions. This corrects that.
This also alters our NI_* functions to return an FPResult type, which
allows us to see which kind of exception in particular is set in
exceptional cases. This is necessary for cases like the fdiv
instructions, which requires handling both ZE and VE being potentially
set.
These can be moved into the RegisterColumn constructor, which avoids
potential allocations in the case a std::function would otherwise need
to allocate to hold all of it's captured data.
Also tidy up the inclusion order while we're at it.
Previously the class was intermixing m_ prefixed variables and
non-prefixed ones, which can be misleading. Instead, we make the
prefixing consistent across the board.
Selecting Dummy or Memory Card would pass wrong values to EXI::ChangeDevice and not work as expected
Changing path had no effect until device was changed as it didn't call EXI::ChangeDevice at all
Makes the values strongly-typed and gets more identifiers out of the
global namespace.
We are forced to use anything that is not "None" to mean none, because
X11 is garbage in that it has:
\#define None 0L
Because clearly no one else will ever want to use that identifier for
anything in their own code (and is why you should prefix literally
any and all preprocessor macros you expose to library users in public
headers).
Makes the enum values strongly-typed and prevents the identifiers from
polluting the PowerPC namespace. This also cleans up the parameters of
some functions where we were accepting an ambiguous int type and
expecting the correct values to be passed in.
Now those parameters accept a PowerPC::CPUCore type only, making it
immediately obvious which values should be passed in. It also turns out
we were storing these core types into other structures as plain ints,
which have also been corrected.
As this type is used directly with the configuration code, we need to
provide our own overloaded insertion (<<) and extraction (>>) operators
in order to make it compatible with it. These are fairly trivial to
implement, so there's no issue here.
A minor adjustment to TryParse() was required, as our generic function
was doing the following:
N tmp = 0;
which is problematic, as custom types may not be able to have that
assignment performed (e.g. strongly-typed enums), so we change this to:
N tmp;
which is sufficient, as the value is attempted to be initialized
immediately under that statement.
This changes the identifier to represent the x86-64 DSP emitter. If any
other JITs for the DSP are added in the future, they all can't use the
same generic identifier.
In cases where we just want a random value for a primitive arithmetic
type, we can wrap this in a template to allow convenient direct
assignment instead of keeping declaration and initialization separate
(making it more difficult to use values uninitialized). This also allows
the use of Common::Random with functions such as std::generate, making
it more flexible in how random values can be generated.
This is only ever used internally. Also change the std::string name over
to a const char*, so that we don't need to potentially allocate anything
on the heap at immediate runtime.
Previously, a total of 114 std::string instances would need to construct
(allocating on the heap for larger strings that can't be stored with
small string optimizations). We can just use an array of const char*
strings instead, which allows us to avoid this.
Given JitBase shouldn't include platform specifics, we can generalize this
preprocessor define and allow any JIT to use it to indicate that generated code should be logged.
While we're at it, also move these defines beneath the includes with the
rest of the defines.
Rather than introduce this handling in every system instruction that modifies
the FPSCR directly, we can instead just handle it within the data structure
instead, which avoids duplicating mask handling across instructions.
This also allows handling proper masking from the debugger register
windows themselves without duplicating masking behavior there either.
ChunkFile doesn't use any of the file utilities, so we can drop these
headers to avoid pulling in unnecessary dependencies. This also
uncovered a few indirect inclusions.
This only queries internal state, it doesn't modify it. With minor
adjustments to BTEmu, this also allows us to make its usage instance a
constant reference.
The required version of MSVC already supports [[maybe_unused]], so we
can utilize this here. When GCC 7 and clang 3.9 become hard
requirements, we can eliminate this macro entirely and replace it with
[[maybe_unused]].
UNUSED is quite a generic macro name and has potential to clash with
other libraries, so rename it to DOLPHIN_UNUSED to prevent that, as well
as make its naming consistent with the force inline macro
This is much better as prefixed double underscores are reserved for the
implementation when it comes to identifiers. Another reason its better,
is that, on Windows, where __forceinline is a compiler built-in, with
the previous define, header inclusion software that detects unnecessary
includes will erroneously flag usages of Compiler.h as unnecessary
(despite being necessary on other platforms). So we define a macro
that's used by Windows and other platforms to ensure this doesn't
happen.
Instead of globbing things under an ambiguous Common.h header, move
compiler-specifics over to Compiler.h. This gives us a dedicated home
for anything related to compilers that we want to make functional across
all compilers that we support.
This moves us a little closer to eliminating Common.h entirely.
Rather than have a separate independent variable that we need to keep
track of in conjunction with the JIT code buffer size itself, amend the
analyst code to use the code buffer constant in JitBase.
Now if the size ever changes, then the analyst will automatically adjust
to handle it.
Given the code buffer is something truly common to all JIT
implementations, we can centralize it in the base class and avoid
duplicating it all over the place, while still allowing for differently
sized buffers.
Gets rid of an inclusion dependency with the DSP interpreter, as well as
a header-based dependency on the DSP opcode tables. This also uncovered
an indirect inclusion on the logger within DSPSymbols.cpp
As peculiar as this may be, decrementer exceptions by means of setting
the decrementer's zeroth bit from 0 to 1 is valid behavior by software
(and is defined in Programming Environments for 32-bit Microprocessors
in section 2.3.14.1 -- Decrementer operation). Given it's valid behavior,
it doesn't necessarily make sense to use a panic alert and halt, as this
isn't a condition where everything should be considered in a critical
state.
Instead, change it to an info log, so we still make note of it, but
without potentially tearing down state or halting emulation.
This fixes the The Last Story prototype that GerbilSoft was testing,
because the apploader is a bit more lenient with the max size of DOL
sections when it detects that you're using a devkit console.
Deduplicates code, and gets rid of some problems the old code had
(such as: bad performance when calling native functions, only one
disc showing up for multi-disc games, Wii banners being low-res,
unnecessarily much effort being needed for adding more metadata).
By making the jitted function a private static function of DSPEmitter,
we can allow access to data members within the context of the function
without making them public overall.
This finally makes all data members for the x64 DSP emitter private.
If we don't do this the prompt *may* appear behind the fullscreened window
and thus cause confusion. This happens both with exclusive fullscreen and
borderless fullscreen (e.g. for OpenGL).
This hardware behavior makes sense, as the FI bit is used to signify an
inexact result. An inexact result is a form of value that results during
the rounding phase of denormalization. If any bits of the significand
are lost during said rounding, then the result is considered to be
inexact.
However NaN and infinity are not classed as subnormals and therefore
don't undergo the denormalization step, making loss of precision not
possible (in NaN's case, numerically rounding something that is
literally Not a Number doesn't even make sense).
FR is set to indicate whether or not the last arithmetic or rounding and
conversion instruction that rounded the intermediate result incremented
the fractional portion of the result. Given neither input types would be
affected by this, this should also be unset.
This corrects more of the exceptional case handling for these values to
match hardware.
As suggested here: https://dolp.in/pr7059#pullrequestreview-125401778
More descriptive than having a std::tuple of FS::Mode, and lets us
give names to known triplets of modes (like in ES). Functions that
only forward mode arguments are slightly less verbose now too.
Prevents implicit conversions to types and requires explicitly
specifying them in order to construct instances of them. Given these are
used within emulation code directly, being explicit is always better
than implicit.
As explained within 179d73ac0d, the table
within the Programming Environments Manual for PowerPC lists the FI and
FR bits as cleared for invalid operation cases. So, we amend the
relevant cases here in order to be accurate to hardware.
As explained within commit a08ad82ace, if
an invalid exception occurs and VE is set, then the destination register
should remain unchanged. Ditto for when ZE is set and a zero divide
exception occurs.
This is only used internally, so we don't need to expose it in the
header. This also allows getting rid of inclusion of the byte swapping
utilities in the header as well.
Given they were only made public so that the callback could access class
state, we can simply make the callback a private static function of
CEXIMic, which allows access to members from the callback function
without making all of said members public.
In the PEM manual, within Table 3-12, which lists what should occur for
invalid operation exceptions, the FPSCR.FI and FPSCR.FR bits are listed
as "Cleared" for when FPSCR.VE is unset and set. So we clear these bits
as well to match hardware behavior.
In the PowerPC Microprocessor Family: The Programming Environments
Manual for 32 and 64-bit Microprocessors, in section 3.3.6.1, Table
3-12 lists what should occur if an invalid operation exception occurs in
situations where VE is set and when VE is not set. In the case where VE
is set, it lists the frD as "Unchanged". It also lists the FPRF flags as
"Unchanged".
Further down in Table 3-13, the listings for what should occur when zero
divide exceptions occur is listed, both for when ZE is set, and when it
isn't. When ZE is set, it lists frD as "Unchanged". It also lists the
FPRF flags as "Unchanged" as well.
This also alters the code so that we don't even calculate the result if
we don't need to compute it, making it a little bit less wasteful.
DataBinHeader is not used anywhere in the code other than via Header,
so let's merge them to reduce noise when accessing header fields
(currently we have to do header.hdr which looks silly).
It would make sense for 0x80 and 0xf0c0 to be respectively
sizeof(BkHeader) and sizeof(Header) as Nintendo is signing anything
that comes after the header, including the BkHeader.
The current WiiSave code is extremely messy, as it exposes all kinds of
implementation details in the header (including internal struct
definitions and magic numbers that don't have to be).
The read/write code is intermingled, so it's hard to tell which members
are used, or when/where they are set at all.
It also implicitly relies on some functions being called in a specific
order since it doesn't seek manually every time, which makes the code
even more fragile.
The logic is also hardcoded to only support bin->nand or nand->bin,
even though it would be useful to support nand->nand (for the
Movie save copying code, for example).
This commit attempts to solve these problems by getting rid of the
WiiSave class:
* Read/write code is moved to new Storage classes (NandStorage and
DataBinStorage) with small, clear functions that do one and only
one thing.
* The import/export logic was refactored into a generic Copy function
that takes two storages as parameters.
* The existing import and export functions are now just small wrappers
that call Copy with the appropriate storages.
This makes it easier to generate random numbers or fill a buffer with
random data in a cryptographically secure way.
This also replaces existing usages of RNG functions in the codebase:
* <random> is pretty hard to use correctly, and std::random_device does
not give enough guarantees about its results (it's
implementation-defined, non cryptographically secure and could be
deterministic on some platforms).
Doing things correctly is error prone and verbose.
* rand() is terrible and should not be used especially in crypto code.
Normalizes variable names to conform to our coding conventions.
Previously we were signifying some variables as externally linked
globals, which wasn't the case.
The definition of the function uses the ordering {mod, reg, rm}, which
is correct. Match the prototype to this, so that the parameter list
isn't misleading.
We can just use std::any_of here to collapse the checking code down to a
single assignment as opposed to a loop. This also slightly improves on
the existing code, as this won't continue to iterate through the cluster
metadata if an entry that's non-zero is encountered.
Pretty much all of the source files contain the following:
namespace IOS
{
namespace HLE
{
namespace <name>
{
// actual code here
} // namespace <name>
} // namespace HLE
} // namespace IOS
which is really verbose boilerplate, because most of the files inside
of Core/IOS are for IOS HLE.
This commit replaces that with a more concise `namespace IOS::HLE`
or `namespace IOS::HLE::(name)`.
This is just used as a means of carting around routines. It's not meant
to directly have functionality embedded within it--this is the job of
the inheriting data structure--so we can just make this a basic struct.
Particularly given all the data members were public to begin with.
Gets rid of the need to set up memcpy boilerplate to reinterpret between
floating-point and integers.
While we're at it, also do a minor bit of tidying.
Given this is what occurs in both constructors (as one just passes
through to another), we can just initialize the member directly.
While we're at it, amend the struct to follow the general ordering
convention of:
<new types>
<functions>
<variables>
Switching to blank NAND when emulation is running is an extremely bad
idea. It's akin to opening up a Wii and replacing the NAND chip while
you're playing a game on it.
Except we're not even replacing it with a NAND that has the same
contents. The blank NAND has nothing in it except the save file for
the current game, which is likely to result in the emulated software
getting inconsistent results and possibly even crashing depending on
how it caches title information.
An example of games that check the saves for other games is
Mario Kart Wii -- it checks the filesystem for Super Mario Galaxy saves
to decide whether to unlock characters. With this 'switch NAND
while emulation is active' misfeature, this will likely break.
And that's the main problem: it encourages sloppy emulation and no one
really knows how many things it can break.
Just don't let the user do horrible things like that during emulation.
If they want to use a blank NAND, they can do so by starting input
recording before launching a game. It's likely they will want to do
this if they plan to share their DTM anyway.
Another bit of behavior that we weren't performing correctly is the
unsetting of FPSCR.FI and FPSCR.FR when FPSCR.ZX is supposed to be set.
This is supported in PEM's section 3.3.6.1 where the following is
stated:
"
When a zero divide condition occurs, the following actions are taken:
- Zero divide exception condition bit is set FPSCR[ZX] = 1.
- FPSCR[FR, FI] are cleared.
"
And so, this fixes that behavior.
FPSCR[ZX] is the bit defined to represent the zero divide exception
condition bit, and is defined as (according to PowerPC Microprocessor
Family: The Programming Environments Manual for 32 and 64-bit
Microprocessors, which will be referred to as "PEM" for the rest of this
commit message) at section 3.3.6.1:
"
A zero divide exception condition occurs when a divide instructions is
executed with a zero divisor value and a finite, nonzero dividend value
or when a floating reciprocal estimate single (fres) or a floating
reciprocal square root estimate (frsqrte) instruction is executed with a
zero operand value.
"
Note that it states the divisor must be zero and the dividend must be
nonzero in order for ZX to be set. This means that the interpreter was
performing the wrong behavior for the case where 0/0 (with any sign on
the zeros) is performed. We would incorrectly set the ZX bit when only
the VXZDZ bit should be set.
It's also worth pointing out that N/0 (where N is any finite nonzero
value) and 0/0 are not within the same exception class. N/0 is a zero
divide exception case, while 0/0 is considered an invalid operation
exception case, which is also indicated in the PEM section 3.3.6.1 as
well where it lists the criteria for invalid operation exceptions.
Therefore we should only be setting the VXZDZ bit in the 0/0 case, not
VXZDZ and ZX. This was also verified via hardware tests to ensure that
this behavior indeed holds.
Fairly trivial to resolve, we just initialize the std::array with two
sets of braces (one set to create the array, the other to start and end the
aggregate data that we'll end up returning)
Given this is actually a part of the Host interface, this should be
placed with it.
While we're at it, turn it into an enum class so that we don't dump its
contained values into the surrounding scope. We can also make
Host_Message take the enum type itself directly instead of taking a
general int value.
After this, it'll be trivial to divide out the rest of Common.h and
remove the header from the repository entirely
If invalid operation exceptions are enabled and an invalid operation
occurs, then the destination value remains untouched. This fixes issues
that may arise when using these two instructions where the destination
gets steamrolled by an infinity or NaN value.
If a NaN of any type is passed as the operand to either of these
instructions, we shouldn't go down the regular code path, as we end up
potentially setting the wrong flags. For example, we wouldn't set the
FPSCR.VXCVI bit properly. We'd also set FPSCR.FI, when in actuality it
should be unset.
If an SNaN is passed as an operand, we also need to set the FPSCR.VXSNAN
bit as well.
The flag setting behavior for these can be found in Appendix C.4.2 in
PowerPC Microprocessor Family: The Programming Environments Manual for
32 and 64-bit Microprocessors.
fctiwz functions in the same manner as fctiw, with the difference being
that fctiwz always assumes the rounding mode being towards zero. Because
of this, we can implement fctiwz in terms of fctiw's code, but modify it
to accept a rounding mode, allowing us to preserve proper behavior for
both instructions.
We also move Helper_UpdateCR1 to a temporary home in
Interpreter_FPUtils.h for the time being. It would be more desirable to
move it to a new common header for all the helpers, so that even JITs
can use them if they so wish, however, this and the following changes
are intended to only touch the interpreter to keep changes minimal for
fixing instruction behavior.
JitCommon already duplicates the Helper_Mask function within
JitBase.cpp/.h, and the ARM JIT includes the Interpreter header in order
to call Helper_Carry. So a follow up is best suited here, as this
touches two other CPU backends.
We can just memcpy the data instead of pointer-casting data, which is
alignment-safe and doesn't run afoul of aliasing rules.
Previously it also made it seem as if data itself pointed to valid
usable data, but it doesn't, it simply functions as an out parameter
where we push data built up from the GetState() functions into it.
This was added in 4bdb4aa0d1 back in
2009-02-27. The only usage spot of this macro involves the same checks
that were used to define that preprocessor macro, so we can simply
remove the macro
If any operand is a signaling NaN, we need to signify this by setting
the VXSNAN bit.
Fixes NaN flag setting for fmsub, fmsubs, fnmsub, fnmsubs, ps_msub, and
ps_nmsub instructions.
If any operand is a signaling NaN, we need to signify this by setting
the VXSNAN bit.
Fixes NaN flag setting for fmadd, fmadds, fnmadd, fnmadds, ps_madd,
ps_nmadd, ps_madds0, and ps_madds1
If either operand is a signaling NaN, we need to signify this by setting
the VXSNAN bit.
This fixes NaN flag setting for fsub, fsubs, and ps_sub instructions.
If either operand is a signaling NaN, we need to signify that by setting
the VXSNAN bit.
This fixes NaN flag setting for fdiv, fdivs and ps_div instructions.
These aren't used to modify the data they point to, so make that
explicit. Also while we're at it, add const to any nearby variables that
can be made so.
This might happen if someone moves settings between e.g. a PC and
an Android device, or if someone was using JITIL and updates Dolphin.
I also made the panic alert a bit more explanatory.
It's not used anywhere other than in DolphinQt2, where the usage is
incorrect and stupid since we shouldn't be trying to stop the core
and 'restore config' that was changed by the core at app exit time,
but immediately when the core is being shut down.
Makes all of the naming consistent with our code style, and makes
parameters match their header equivalents.
Essentially just a clean-up of things that weren't migrated over
already.
If either of the operands are signaling NaNs, then an invalid operation
exception needs to be indicated within the FPSCR.
This corrects SNaN flag setting for fmul, fmuls, ps_mul, ps_muls0, and
ps_muls1.
In old GCC versions, capturing 'this' does not work for some lambdas.
The workaround is to not use auto for the parameter (even though the
type is obvious). This can be dropped once we require GCC 7.
If the input is a signaling NaN, then we need to signal that via setting
the FPSCR.VXSNAN bit. We also shouldn't update the FPRF flags if
FPSCR.VE is set.
If the FPSCR.VE bit is set and an invalid operand is passed in, then the FPRF
shouldn't be updated. Similarly this is also the case when the FPSCR.ZE bit
is set and negative or positive zero is passed in as the operand.
If FPSCR.ZE is set and a divide by zero exception is signaled, then the
FPRF shouldn't be updated with a result. Similarly, if the input is an
SNaN and FPSCR.VE is set, then the FPRF shouldn't be updated.
The VX bit is intended to be a summary bit indicating the occurrence of
any kind of invalid operation. Therefore, whenever an invalid operation
exception is set, also set VX.
This corrects our CR flag setting for multiple instructions in certain
scenarios. This corrects flag setting cases in fadd, fadds, fctiw, fctiwz, fdiv,
frsp, frsqrte, fsub, and fsubs (and technically every floating-point
instruction that we make more accurate in the future with regards to
flag setting).
Coherent mappings have a lower overhead and less GL codes.
So enables coherent mapping by default for all drivers.
Both Qualcomm and ARM performs very bad with explicit flushing, so this change helps them as well.
AFAIK there was one GPU generation which was slower on coherent mapping: nvidia tesla
So Geforce 200 and 300 series should be tested with this PR before merging.
As this was last tested many years ago, this issue might have been fixed as well.
Those GPUs are close to 10 years old and not supported any more by nvidia.
This ports the Wii filesystem root, Wii SD card path and dump path
settings to the new config system (OnionConfig).
My initial plan was to wait until DolphinWX was removed before porting
most of the Main (Core, DSP, General) settings to onion config, but
I've decided to submit a small part of those changes to fix
[issue 10566](https://bugs.dolphin-emu.org/issues/10566).
Removes the need to manually set the FileUtil path in the UI frontends
and gets rid of some more members that don't really belong in SConfig.
Also fixes a bug which would cause the dump path not to get created
after change.
Only invoke config changed callbacks from Config::Save, not
Layer::Save. The latter results in callbacks being called
once per layer, up to 7 times per save.
These disc images are only used on dev units and not retail units.
There are two important differences compared to normal Wii disc images:
- The data starts 0x8000 bytes into each partition instead of 0x20000
- The data of a partition is stored unencrypted and contains no hashes
Our old implementation was just guesswork and doesn't work at all.
According to testing by GerbilSoft, this commit's implementation
is able to read and extract files in the filesystem correctly,
but the tested game still isn't able to boot. (It's thanks to their
info about unencrypted disc images that I was able to make this commit.)
Initialising Wii filesystem contents should be done after Boot and
not in HW to ensure that we operate with the correct title context
and to make sure required title directories exist (so that Movie and
Netplay code can copy data from and to the temporary NAND).
Previously, given cases such as 0x80000000 / 0xFFFFFFFF we'd incorrectly
set the destination register value to zero. If the dividend is negative,
then the destination should be set to -1 (0xFFFFFFFF), however if the
dividend is positive, then the destination should be set to 0.
Note that the 750CL documents state that:
"If an attempt is made to perform either of the divisions --
0x80000000 / -1 or <anything> / 0, then the contents of rD are
undefined, as are the contents of the LT, GT, and EQ bits of the CR0
field (if Rc = 1). In this case, if OE = 1 then OV is set."
So this is a particular behavior of the hardware itself.
D3D11 cannot handle block compressed textures where the first mip level
is not a multiple of the block size. The simple fix for texture pack
authors: leave these textures uncompressed. You can still use a .dds
container.
Executing a supervisor-level instruction in user mode is supposed to
cause a program exception to occur.
The following supervisor instructions are present:
- dcbi
- mfmsr
- mfspr
- mfsr
- mfsrin
- mtmsr
- mtspr
- mtsr
- mtsrin
- rfi
- tlbie
- tlbsync
In 0337ca116a checks within mfspr and
mtspr were added. This change adds the trivial checks to the other
instructions.
Using 8-bit integer math here lead to precision loss for depth copies,
which broke various effects in games, e.g. lens flare in MK:DD.
It's unlikely the console implements this as a floating-point multiply
(fixed-point perhaps), but since we have the float round trip in our
EFB2RAM shaders anyway, it's not going to make things any worse. If we
do rewrite our shaders to use integer math completely, then it might be
worth switching this conversion back to integers.
However, the range of the values (format) should be known, or we should
expand all values out to 24-bits first.
Keeps signed values out of bit arithmetic (not that there's any issues
that could arise from it in these situations, but it does look more
consistent, and silences compiler warnings)
Also ensure that all members of the class are initialized on
construction as well. Previously the bool indicating if options are
dirty wouldn't be initialized, which could be read uninitialized if an
instance was constructed and then IsDirty() is called.
Keeps all of the interpreter-specific exception handling functions
together in a reusable way across translation units, similar to
FPUtils.h for reusable floating-point functions.
Given this is a base class, we should clearly state what the parameters
to the functions in its exposed interface actually mean or represent.
This avoids needing to hunt for the definition of the functions in cpp
files.
While we're at it, normalize said parameter names so they follow our
naming guidelines.
There's no reason to use int here as opposed to an unsigned value.
Video_AccessEFB() takes its arguments as u32 values, so we'd be doing
sign conversions for no reason here (along with causing avoidable
compiler warnings).
If a program executing in user mode tries to write to any SPRs other than
XER, LR, or CTR registers, then a program exception occurs. Similarly
this also applies for reading SPRs as well, however the upper and lower
timebase halves can also be read (but not written to).
If HID0.NOOPTI is set, then dcbt and dcbtst are no-oped globally. We
currently don't perform data cache emulation, but we put this in anyway
so this detail isn't forgotten about if data cache emulation is
introduced at some point in the future.
This implements ES_VerifySign which is notably used by the system menu
when importing saves.
Now *all* ES commands that are actually used by titles are implemented.
- Move all of the ec functions into the Common::ec namespace.
- Give the public functions better names and some usage information.
- Move all of the "elt" related functions into an "elt" class including
all of the arithmetic operations, so that the logic becomes clearer
and feels less like assembly.
This also makes it much more obvious what the parameters are, instead
of only using unsigned char* (which doesn't tell anything about what
the pointer is used for or the size).
- Similarly, add a new "Point" class and move point functions there.
Overload the arithmetic operators to make calculations easier to read
The loops relied on unsigned integer overflow, which is not immediately
obvious. Replace them with less clever variants that are clearer.
Also implement bn_compare using std::memcmp.
This function in both JITs is only ever called by passing the JIT's code
buffer into it. Given this is already accessible, since the functions
are part of the respective JIT class, we can just remove this parameter.
This also cleans up accesses with the new code buffer, as we don't need
to do janky looking dereference-then-index expressions.
This class effectively acted as a "discount vector", that would simply
allocate memory and then delete it in the destructor when it goes out of
scope.
We can just use a std::vector directly to reduce this boilerplate.
ImportTitleDone only checks if all required contents have been imported
for system titles.
This fixes the system menu not being able to recreate title directories
to copy a save back to the NAND by using title import functionality.
Given this is a bitmask, we should be using an unsigned type to store it
(especially given it's outside the range an int can represent properly
without being considered negative).
No behavior change is caused by this, it just silences a sign conversion
warning.
Because it wasn't parented properly, it would show briefly the widget in its own window when creating an ARCodeWidget or a GeckoCodeWidget which would occur when accessing the game properties page or when the state changes to pause/running.
PowerPC.h at this point is pretty much a general glob of stuff, and it's
unfortunate, since it means pulling in a lot of unrelated header
dependencies and a bunch of other things that don't need to be seen by
things that just want to read memory.
Breaking this out into its own header keeps all the MMU-related stuff
together and also limits the amount of header dependencies being
included (the primary motivation for this being the former reason).
This fixes 2 crashes with the pause function. One is when spamming the pause hotkey and the other is to press pause and step hotkeys at the same time. It does disable the screensaver getting disabled when the emulator is running, but paused, though, a better solution would have to be done without introducing these crashes.
Github didn't detect conflicts here, however, since the float handling
functions were moved into the Common namespace, this would cause a build
failure.
Ideally none of these macros would exist (long-term goal), however in
the meantime at least make sure expressions always evaluate correctly
(thankfully no current usages rely on this).
Given we're operating with flags and bit representations, lets avoid
signed values here. It lessens the amount of sign conversion warnings
and lessens the amount of things to think about screwing you over when
making changes to the interpreter among other things.
Hopefully this better matches the user's view of a texture - as large changes in
colour should be weighted higher than lots of very small changes
Note: This likely invalidates the current heuristic threshold default
These can be expressed in a slightly cleaner manner without so many
casts. While we're at it, also get rid of unnecessary indexing (we
already have the result nearby).
Extracts the self-contained code into its own function to clean up the
flow of Jit() a little more.
This also introduces a helper function to HLE.h that will be used to
reduce the boilerplate here and in the interpreter and Jit64 in the
following commits.
This function performs all of the preliminary checks required prior to
attempting to hook/replace a function at a given address. The function then
calls a provided object that satisfies the FunctionObject concept in the
C++ standard library. This can be a lambda, a regular function pointer,
an object with an overloaded function call operator, etc. The only
requirement is that the function return a bool, indicating whether or
not the function was replaced, and that it can take parameters in the
form: fn(u32 function, HLE::HookType type)
Gets rid of a second pair of ifdefs in the constructor. This also makes
sure the fd on Unix/BSD platforms is uniformly initialized. Previously
fd would be in an inconsistent state on FreeBSD or OpenBSD due to the
BSD OS checks not being present in the #elif within the constructor.
Previously, the entirety of CEXIETHERNET was exposed publically, which
wasn't necessary. We simply make the thread function part of the
internal interface, which gives it access to internal data members,
while keeping everything else outside of it.
Given these HLE classes inherit from a common base with a virtual
destructor, override is more appropriate here, as virtual propagates to
these destructors anyway.
This is also safer. If the base class' destructor is ever made
non-virtual, then these classes will cause a compilation error if they
aren't taken into account, as they'd be overriding a non-virtual
function (the destructor).
This is to avoid several issue with using 2 actions and switching between them. This commit will instead have one action get his property changed on pause and play.
Paired single (ps) instructions can call asm_routines that try to update
PowerPC::ppcState.pc. At the time the asm_routine is built, emulation has
not started and the PC is invalid (0). If the ps instruction causes an
exception (e.g. DSI), SRR0 gets clobbered with the invalid PC.
This change makes the relevant ps instructions store PC before calling out
to asm_routines, and prevents the asm_routine from trying to store PC
itself.
Moves the codebuffer access variables closer to their first use, and
gets rid of multiple indexing expressions. We already know which op
we're accessing in particular, so just make a reference to it and access
it instead of duplicating the expression all over the place.
A call like ReplaceAddress(address, 0) is pretty ambiguous; so is
ReplaceAddress(address, false), so use an enum class that tells people
straight-up what the replacer is.
This also gets rid of the really weird naming, where if 'blr' is true,
we'd be replacing the address with a NOP, rather than an actual BLR
instruction, so we invert that so it actually makes sense. There's no
actual bug fixed here though, considering the OnInsert functions
specified the correct values; it's literally just weird naming.
Without this macro, if any signals or slots were attempted to be used,
they wouldn't work; neither would various other features of the Qt
meta-object system. This can also lead to weird behavior in other
circumstances. Qt's documentation specifically states:
"Therefore, we strongly recommend that all subclasses of QObject use the
Q_OBJECT macro regardless of whether or not they actually use signals,
slots, and properties."
on its page for "The Meta-Object System", which can be seen here:
https://doc.qt.io/qt-5/metaobjects.html
Let's opt for "always do the right thing", and keep the code extensible
for the future and not have random things blow up on us.
Makes the enum strongly typed. A function for retrieving the string
representation of the enum is also added, which allows hiding the array
that contains all of the strings from view (i.e. we operate on the API,
not the exposed internals). This also allows us to bounds check any
querying for the strings.
Export and ExportAll now open a directory picker (that defaults to the
previous default directory, i.e. the Dolphin user dir).
Also removes the need to return the path in the export functions since
the user knows which path they chose.
This moves the result dialogs to DolphinQt2, since WiiSave should not
really be responsible for interacting with the user as a simple
Wii save importing/exporting class.
This also fixes Wii save import/export showing result dialogs twice,
once from WiiSave, and another time from DolphinQt2.
Move the import/export operation into separate functions, as it doesn't
really make sense for the constructor to do *everything*, including
printing success/failure message boxes.
The existing constructor was split into two: one that takes a path,
and another taking a title ID. This makes it more obvious what is
actually done when a path/TID is passed and also clarifies what
parameters should be passed. (No more magic 0 or "" value.)
It only needs to be updated when we changes the symbols, not every time the code widget updates and it does take a while to update them so this fixes some delay when updating the code window.
Putting the columns to resizeToContents causes way too much resizes per updates which can cause severe lags and even crashes. This only does one resize at the end of the columns.
One, which was also possible in Wx is to add an mbp after the core stopped which shouldn't be possible as it needs to add the memcheck on the core thread which wouldn't be running. The other fix is Qt specific where it doesn't clear the breakpoints on stop.
The items were editable while you cannot edit the breakpoints at the moment and the last breakpoint deleted would not cause the row count to change to 0.
This allows avoiding two copies of the executable data being created in
the following scenario (using pseudocode):
some_function()
{
std::vector<u8> data = ...;
DolReader reader{data};
...
}
In this scenario, if we only use the data for passing it to DolReader,
then we have to perform a copy, as the constructor takes the std::vector
as a constant reference -- you cannot move from a constant reference,
and so we copy data into the DolReader, and perform another copy in the
constructor itself when assigning the data to the m_bytes member
variable. However, we can do better.
Now, the following is allowable as well:
some_function()
{
std::vector<u8> data = ...;
DolReader reader{std::move(data)};
...
}
and now we perform no copy at any point in the reader's construction, as
we just std::move the data all the way through to m_bytes.
In the case where we *do* want to keep the executable data around after
constructing the reader, then we can just pass the vector without
std::move-ing it, and we only perform a copy once (as we'll std::move
said copy into m_bytes). Therefore, we get a more flexible interface
resource-wise out of it.
Not only it colors the entire row instead of just the address, but if the pc is the selected row, the pc color will overwrite the selection, this is done via a stylesheet.
This commit makes the colors hardcoded except when there is no symbols loaded, in which case, it uses the theme colors, except for the PC which is hardcoded to black on green. This makes a compromise between making use of the corespoinding theme color and the text being nicely readable on all themes.
This aligns the values to the right since It looks odd to be aligned to the left with any format other than hexadecimal. It also sets the font tot he debugger font and disallow selection as a previous commit made the selection pointless since it now relies on the current item.
It seemed impossible to SELECT an item, however, when right clicking, the CURRENT item is set to the appropriate cell, this commit makes the view use thta cell instead of the first selected one.
This makes it possible to use enums as the config type.
Default values are now clearer and there's no need for casts
when calling Config::Get/Set anymore.
In order to add support for enums, the common code was updated to
handle enums by using the underlying type when loading/saving settings.
A copy constructor is also provided for conversions from
`ConfigInfo<Enum>` to `ConfigInfo<underlying_type<Enum>>`
so that enum settings can still easily work with code that doesn't care
about the actual enum values (like Graphics{Choice,Radio} in DolphinQt2
which only treat the setting as an integer).
Dolphin doesn't use any of the WC24 files, so this can be done when
actually starting emulation in WiiRoot. The benefit of moving the
copy is that we don't need to handle temporary NANDs in a special way.
{Initialize,Shutdown}WiiRoot should only be responsible for setting the
SESSION_WII_ROOT or managing the temporary NAND directory.
Move all the content manipulation out of these functions to ensure
separation of concerns and call them after/before WiiRoot init/shutdown
to make sure they operate on the correct root.
If we don't flush the values, they persist in the register cache,
potentially resulting in the values being out of sync with PPCSTATE.
This was causing random crashes in games, mainly booting, when certain
JIT instructions were disabled, or forced to fall back to interpreter.
This excludes the second argument from template deduction.
Otherwise, it is required to manually cast the second argument to
the ConfigInfo type (because implicit conversions won't work).
e.g. to set the value for a ConfigInfo<std::string> from a string
literal, you'd need a ugly `std::string("yourstring")`.
This can be considered a hack, but it essentially neuter the bias applied on boot for both console on the RTC. This avoids having the time on boot be changes significantly while the user would want a specific RTC and it also avoids possible underflow of the RTC if it is near the epoch.
Lioncash