PowerPC: Move MMU-specifics from PowerPC.h to MMU.h

PowerPC.h at this point is pretty much a general glob of stuff, and it's
unfortunate, since it means pulling in a lot of unrelated header
dependencies and a bunch of other things that don't need to be seen by
things that just want to read memory.

Breaking this out into its own header keeps all the MMU-related stuff
together and also limits the amount of header dependencies being
included (the primary motivation for this being the former reason).

Source/Core/Core/ActionReplay.cpp

@@ -39,7 +39,7 @@
 
 #include "Core/ARDecrypt.h"
 #include "Core/ConfigManager.h"
-#include "Core/PowerPC/PowerPC.h"
+#include "Core/PowerPC/MMU.h"
 
 namespace ActionReplay
 {

Source/Core/Core/Boot/Boot_BS2Emu.cpp

@@ -26,6 +26,7 @@
 #include "Core/IOS/FS/FileSystem.h"
 #include "Core/IOS/IOS.h"
 #include "Core/IOS/Uids.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PowerPC.h"
 
 #include "DiscIO/Enums.h"

Source/Core/Core/Core.vcxproj

@@ -524,6 +524,7 @@
     <ClInclude Include="PowerPC\SignatureDB\MEGASignatureDB.h" />
     <ClInclude Include="PowerPC\SignatureDB\SignatureDB.h" />
     <ClInclude Include="PowerPC\JitInterface.h" />
+    <ClInclude Include="PowerPC\MMU.h" />
     <ClInclude Include="PowerPC\PowerPC.h" />
     <ClInclude Include="PowerPC\PPCAnalyst.h" />
     <ClInclude Include="PowerPC\PPCCache.h" />

Source/Core/Core/Core.vcxproj.filters

@@ -1305,6 +1305,9 @@
     <ClInclude Include="PowerPC\JitInterface.h">
       <Filter>PowerPC</Filter>
     </ClInclude>
+    <ClInclude Include="PowerPC\MMU.h">
+      <Filter>PowerPC</Filter>
+    </ClInclude>
     <ClInclude Include="PowerPC\PowerPC.h">
       <Filter>PowerPC</Filter>
     </ClInclude>

Source/Core/Core/Debugger/Debugger_SymbolMap.cpp

@@ -12,7 +12,7 @@
 #include "Common/StringUtil.h"
 
 #include "Core/Core.h"
-#include "Core/HW/Memmap.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PPCAnalyst.h"
 #include "Core/PowerPC/PPCSymbolDB.h"
 #include "Core/PowerPC/PowerPC.h"

Source/Core/Core/Debugger/PPCDebugInterface.cpp

@@ -12,6 +12,7 @@
 
 #include "Core/Core.h"
 #include "Core/HW/DSP.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PPCSymbolDB.h"
 #include "Core/PowerPC/PowerPC.h"
 

Source/Core/Core/Debugger/RSO.cpp

@@ -12,8 +12,8 @@
 
 #include "Common/CommonFuncs.h"
 #include "Common/Logging/Log.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PPCSymbolDB.h"
-#include "Core/PowerPC/PowerPC.h"
 
 void RSOHeaderView::Load(u32 address)
 {

Source/Core/Core/FifoPlayer/FifoPlayer.cpp

@@ -22,6 +22,7 @@
 #include "Core/HW/SystemTimers.h"
 #include "Core/HW/VideoInterface.h"
 #include "Core/Host.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PowerPC.h"
 #include "VideoCommon/BPMemory.h"
 #include "VideoCommon/CommandProcessor.h"

Source/Core/Core/GeckoCode.cpp

@@ -12,10 +12,11 @@
 
 #include "Common/ChunkFile.h"
 #include "Common/CommonPaths.h"
+#include "Common/CommonTypes.h"
 #include "Common/FileUtil.h"
 
 #include "Core/ConfigManager.h"
-#include "Core/HW/Memmap.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PowerPC.h"
 
 namespace Gecko

Source/Core/Core/HLE/HLE_Misc.cpp

@@ -4,11 +4,12 @@
 
 #include "Core/HLE/HLE_Misc.h"
 
+#include "Common/Common.h"
 #include "Common/CommonTypes.h"
-#include "Common/Logging/Log.h"
 #include "Core/GeckoCode.h"
 #include "Core/HW/CPU.h"
 #include "Core/Host.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PowerPC.h"
 
 namespace HLE_Misc

Source/Core/Core/HLE/HLE_OS.cpp

@@ -12,6 +12,7 @@
 #include "Common/MsgHandler.h"
 #include "Common/StringUtil.h"
 #include "Core/HLE/HLE_VarArgs.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PowerPC.h"
 
 namespace HLE_OS

Source/Core/Core/HLE/HLE_VarArgs.h

@@ -7,7 +7,7 @@
 #include "Common/Align.h"
 #include "Common/CommonTypes.h"
 
-#include "Core/HW/Memmap.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PowerPC.h"
 
 #include <type_traits>

Source/Core/Core/HW/Memmap.h

@@ -10,7 +10,7 @@
 #include "Common/CommonTypes.h"
 #include "Common/MathUtil.h"
 #include "Common/Swap.h"
-#include "Core/PowerPC/PowerPC.h"
+#include "Core/PowerPC/MMU.h"
 
 // Global declarations
 class PointerWrap;

Source/Core/Core/PatchEngine.cpp

@@ -24,6 +24,7 @@
 #include "Core/ConfigManager.h"
 #include "Core/GeckoCode.h"
 #include "Core/GeckoCodeConfig.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PowerPC.h"
 
 namespace PatchEngine

Source/Core/Core/PowerPC/BreakPoints.cpp

@@ -15,7 +15,7 @@
 #include "Common/Logging/Log.h"
 #include "Core/Core.h"
 #include "Core/PowerPC/JitInterface.h"
-#include "Core/PowerPC/PowerPC.h"
+#include "Core/PowerPC/MMU.h"
 
 bool BreakPoints::IsAddressBreakPoint(u32 address) const
 {

Source/Core/Core/PowerPC/Interpreter/Interpreter.cpp

@@ -20,6 +20,7 @@
 #include "Core/HLE/HLE.h"
 #include "Core/HW/CPU.h"
 #include "Core/Host.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PPCTables.h"
 #include "Core/PowerPC/PowerPC.h"
 

Source/Core/Core/PowerPC/Interpreter/Interpreter_Branch.cpp

@@ -8,6 +8,7 @@
 #include "Core/CoreTiming.h"
 #include "Core/HLE/HLE.h"
 #include "Core/PowerPC/Interpreter/Interpreter.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PowerPC.h"
 
 void Interpreter::bx(UGeckoInstruction inst)

Source/Core/Core/PowerPC/Interpreter/Interpreter_LoadStore.cpp

@@ -12,6 +12,7 @@
 #include "Core/PowerPC/Interpreter/Interpreter.h"
 #include "Core/PowerPC/Interpreter/Interpreter_FPUtils.h"
 #include "Core/PowerPC/JitInterface.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PowerPC.h"
 
 bool Interpreter::m_reserve;

Source/Core/Core/PowerPC/Interpreter/Interpreter_LoadStorePaired.cpp

@@ -12,6 +12,7 @@
 #include "Common/MathUtil.h"
 #include "Core/PowerPC/Interpreter/Interpreter.h"
 #include "Core/PowerPC/Interpreter/Interpreter_FPUtils.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PowerPC.h"
 
 // dequantize table

Source/Core/Core/PowerPC/Interpreter/Interpreter_SystemRegisters.cpp

@@ -13,6 +13,7 @@
 #include "Core/HW/GPFifo.h"
 #include "Core/HW/SystemTimers.h"
 #include "Core/PowerPC/Interpreter/Interpreter_FPUtils.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PowerPC.h"
 
 /*

Source/Core/Core/PowerPC/Jit64/Jit.cpp

@@ -32,6 +32,7 @@
 #include "Core/PowerPC/Jit64Common/Jit64PowerPCState.h"
 #include "Core/PowerPC/Jit64Common/TrampolineCache.h"
 #include "Core/PowerPC/JitInterface.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PowerPC.h"
 #include "Core/PowerPC/Profiler.h"
 #if defined(_DEBUG) || defined(DEBUGFAST)

Source/Core/Core/PowerPC/Jit64Common/EmuCodeBlock.cpp

@@ -11,11 +11,13 @@
 #include "Common/CPUDetect.h"
 #include "Common/FloatUtils.h"
 #include "Common/Intrinsics.h"
+#include "Common/Swap.h"
 #include "Core/HW/MMIO.h"
 #include "Core/HW/Memmap.h"
 #include "Core/PowerPC/Gekko.h"
 #include "Core/PowerPC/Jit64Common/Jit64Base.h"
 #include "Core/PowerPC/Jit64Common/Jit64PowerPCState.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PowerPC.h"
 
 using namespace Gen;

Source/Core/Core/PowerPC/JitArm64/JitArm64_BackPatch.cpp

@@ -15,6 +15,7 @@
 #include "Core/HW/Memmap.h"
 #include "Core/PowerPC/JitArm64/Jit.h"
 #include "Core/PowerPC/JitArmCommon/BackPatch.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PowerPC.h"
 
 using namespace Arm64Gen;

Source/Core/Core/PowerPC/JitArm64/JitArm64_LoadStore.cpp

@@ -16,6 +16,7 @@
 #include "Core/PowerPC/JitArm64/JitArm64_RegCache.h"
 #include "Core/PowerPC/JitArm64/Jit_Util.h"
 #include "Core/PowerPC/JitInterface.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PPCTables.h"
 #include "Core/PowerPC/PowerPC.h"
 

Source/Core/Core/PowerPC/JitArm64/JitArm64_LoadStoreFloating.cpp

@@ -12,6 +12,7 @@
 #include "Core/CoreTiming.h"
 #include "Core/PowerPC/JitArm64/Jit.h"
 #include "Core/PowerPC/JitArm64/JitArm64_RegCache.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PPCTables.h"
 #include "Core/PowerPC/PowerPC.h"
 

Source/Core/Core/PowerPC/JitArm64/JitAsm.cpp

@@ -12,6 +12,7 @@
 #include "Core/PowerPC/JitArm64/Jit.h"
 #include "Core/PowerPC/JitCommon/JitAsmCommon.h"
 #include "Core/PowerPC/JitCommon/JitCache.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PowerPC.h"
 
 using namespace Arm64Gen;

Source/Core/Core/PowerPC/JitCommon/JitCache.cpp

@@ -22,6 +22,7 @@
 #include "Core/ConfigManager.h"
 #include "Core/Core.h"
 #include "Core/PowerPC/JitCommon/JitBase.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PPCSymbolDB.h"
 #include "Core/PowerPC/PowerPC.h"
 

Source/Core/Core/PowerPC/JitInterface.cpp

@@ -25,6 +25,7 @@
 #include "Core/PowerPC/CPUCoreBase.h"
 #include "Core/PowerPC/CachedInterpreter/CachedInterpreter.h"
 #include "Core/PowerPC/JitCommon/JitBase.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PPCSymbolDB.h"
 #include "Core/PowerPC/PowerPC.h"
 #include "Core/PowerPC/Profiler.h"

Source/Core/Core/PowerPC/MMU.cpp

@@ -2,11 +2,12 @@
 // Licensed under GPLv2+
 // Refer to the license.txt file included.
 
+#include "Core/PowerPC/MMU.h"
+
 #include <cstddef>
 #include <cstring>
 #include <string>
 
-#include "Common/Atomic.h"
 #include "Common/BitUtils.h"
 #include "Common/CommonTypes.h"
 

Source/Core/Core/PowerPC/MMU.h

@@ -0,0 +1,121 @@
+// Copyright 2018 Dolphin Emulator Project
+// Licensed under GPLv2+
+// Refer to the license.txt file included.
+
+#pragma once
+
+#include <array>
+#include <cstddef>
+#include <string>
+
+#include "Common/CommonTypes.h"
+
+namespace PowerPC
+{
+// Routines for debugger UI, cheats, etc. to access emulated memory from the
+// perspective of the CPU.  Not for use by core emulation routines.
+// Use "Host_" prefix.
+u8 HostRead_U8(u32 address);
+u16 HostRead_U16(u32 address);
+u32 HostRead_U32(u32 address);
+u64 HostRead_U64(u32 address);
+float HostRead_F32(u32 address);
+double HostRead_F64(u32 address);
+u32 HostRead_Instruction(u32 address);
+
+void HostWrite_U8(u8 var, u32 address);
+void HostWrite_U16(u16 var, u32 address);
+void HostWrite_U32(u32 var, u32 address);
+void HostWrite_U64(u64 var, u32 address);
+void HostWrite_F32(float var, u32 address);
+void HostWrite_F64(double var, u32 address);
+
+std::string HostGetString(u32 address, size_t size = 0);
+
+// Returns whether a read or write to the given address will resolve to a RAM
+// access given the current CPU state.
+bool HostIsRAMAddress(u32 address);
+
+// Same as HostIsRAMAddress, but uses IBAT instead of DBAT.
+bool HostIsInstructionRAMAddress(u32 address);
+
+// Routines for the CPU core to access memory.
+
+// Used by interpreter to read instructions, uses iCache
+u32 Read_Opcode(u32 address);
+struct TryReadInstResult
+{
+  bool valid;
+  bool from_bat;
+  u32 hex;
+  u32 physical_address;
+};
+TryReadInstResult TryReadInstruction(u32 address);
+
+u8 Read_U8(u32 address);
+u16 Read_U16(u32 address);
+u32 Read_U32(u32 address);
+u64 Read_U64(u32 address);
+
+// Useful helper functions, used by ARM JIT
+float Read_F32(u32 address);
+double Read_F64(u32 address);
+
+// used by JIT. Return zero-extended 32bit values
+u32 Read_U8_ZX(u32 address);
+u32 Read_U16_ZX(u32 address);
+
+void Write_U8(u8 var, u32 address);
+void Write_U16(u16 var, u32 address);
+void Write_U32(u32 var, u32 address);
+void Write_U64(u64 var, u32 address);
+
+void Write_U16_Swap(u16 var, u32 address);
+void Write_U32_Swap(u32 var, u32 address);
+void Write_U64_Swap(u64 var, u32 address);
+
+// Useful helper functions, used by ARM JIT
+void Write_F64(double var, u32 address);
+
+void DMA_LCToMemory(u32 mem_address, u32 cache_address, u32 num_blocks);
+void DMA_MemoryToLC(u32 cache_address, u32 mem_address, u32 num_blocks);
+void ClearCacheLine(u32 address);  // Zeroes 32 bytes; address should be 32-byte-aligned
+
+// TLB functions
+void SDRUpdated();
+void InvalidateTLBEntry(u32 address);
+void DBATUpdated();
+void IBATUpdated();
+
+// Result changes based on the BAT registers and MSR.DR.  Returns whether
+// it's safe to optimize a read or write to this address to an unguarded
+// memory access.  Does not consider page tables.
+bool IsOptimizableRAMAddress(u32 address);
+u32 IsOptimizableMMIOAccess(u32 address, u32 access_size);
+bool IsOptimizableGatherPipeWrite(u32 address);
+
+struct TranslateResult
+{
+  bool valid;
+  bool from_bat;
+  u32 address;
+};
+TranslateResult JitCache_TranslateAddress(u32 address);
+
+constexpr int BAT_INDEX_SHIFT = 17;
+constexpr u32 BAT_PAGE_SIZE = 1 << BAT_INDEX_SHIFT;
+constexpr u32 BAT_MAPPED_BIT = 0x1;
+constexpr u32 BAT_PHYSICAL_BIT = 0x2;
+constexpr u32 BAT_RESULT_MASK = UINT32_C(~0x3);
+using BatTable = std::array<u32, 1 << (32 - BAT_INDEX_SHIFT)>;  // 128 KB
+extern BatTable ibat_table;
+extern BatTable dbat_table;
+inline bool TranslateBatAddess(const BatTable& bat_table, u32* address)
+{
+  u32 bat_result = bat_table[*address >> BAT_INDEX_SHIFT];
+  if ((bat_result & BAT_MAPPED_BIT) == 0)
+    return false;
+  *address = (bat_result & BAT_RESULT_MASK) | (*address & (BAT_PAGE_SIZE - 1));
+  return true;
+}
+}  // namespace PowerPC

Source/Core/Core/PowerPC/PPCAnalyst.cpp

@@ -15,6 +15,7 @@
 #include "Common/Logging/Log.h"
 #include "Common/StringUtil.h"
 #include "Core/ConfigManager.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PPCSymbolDB.h"
 #include "Core/PowerPC/PPCTables.h"
 #include "Core/PowerPC/PowerPC.h"

Source/Core/Core/PowerPC/PPCSymbolDB.cpp

@@ -13,8 +13,8 @@
 #include "Common/CommonTypes.h"
 #include "Common/File.h"
 #include "Common/Logging/Log.h"
-#include "Common/MsgHandler.h"
 #include "Common/StringUtil.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PPCAnalyst.h"
 #include "Core/PowerPC/PowerPC.h"
 #include "Core/PowerPC/SignatureDB/SignatureDB.h"

Source/Core/Core/PowerPC/PowerPC.cpp

@@ -17,12 +17,12 @@
 #include "Core/ConfigManager.h"
 #include "Core/CoreTiming.h"
 #include "Core/HW/CPU.h"
-#include "Core/HW/Memmap.h"
 #include "Core/HW/SystemTimers.h"
 #include "Core/Host.h"
 #include "Core/PowerPC/CPUCoreBase.h"
 #include "Core/PowerPC/Interpreter/Interpreter.h"
 #include "Core/PowerPC/JitInterface.h"
+#include "Core/PowerPC/MMU.h"
 
 namespace PowerPC
 {

Source/Core/Core/PowerPC/PowerPC.h

@@ -210,112 +210,6 @@ void UpdatePerformanceMonitor(u32 cycles, u32 num_load_stores, u32 num_fp_inst);
 #define riPS0(i) (*(u64*)(&PowerPC::ppcState.ps[i][0]))
 #define riPS1(i) (*(u64*)(&PowerPC::ppcState.ps[i][1]))
 
-// Routines for debugger UI, cheats, etc. to access emulated memory from the
-// perspective of the CPU.  Not for use by core emulation routines.
-// Use "Host_" prefix.
-u8 HostRead_U8(u32 address);
-u16 HostRead_U16(u32 address);
-u32 HostRead_U32(u32 address);
-u64 HostRead_U64(u32 address);
-float HostRead_F32(u32 address);
-double HostRead_F64(u32 address);
-u32 HostRead_Instruction(u32 address);
-
-void HostWrite_U8(u8 var, u32 address);
-void HostWrite_U16(u16 var, u32 address);
-void HostWrite_U32(u32 var, u32 address);
-void HostWrite_U64(u64 var, u32 address);
-void HostWrite_F32(float var, u32 address);
-void HostWrite_F64(double var, u32 address);
-
-// Returns whether a read or write to the given address will resolve to a RAM
-// access given the current CPU state.
-bool HostIsRAMAddress(u32 address);
-// Same as HostIsRAMAddress, but uses IBAT instead of DBAT.
-bool HostIsInstructionRAMAddress(u32 address);
-
-std::string HostGetString(u32 em_address, size_t size = 0);
-
-// Routines for the CPU core to access memory.
-
-// Used by interpreter to read instructions, uses iCache
-u32 Read_Opcode(u32 address);
-struct TryReadInstResult
-{
-  bool valid;
-  bool from_bat;
-  u32 hex;
-  u32 physical_address;
-};
-TryReadInstResult TryReadInstruction(u32 address);
-
-u8 Read_U8(u32 address);
-u16 Read_U16(u32 address);
-u32 Read_U32(u32 address);
-u64 Read_U64(u32 address);
-
-// Useful helper functions, used by ARM JIT
-float Read_F32(u32 address);
-double Read_F64(u32 address);
-
-// used by JIT. Return zero-extended 32bit values
-u32 Read_U8_ZX(u32 address);
-u32 Read_U16_ZX(u32 address);
-
-void Write_U8(u8 var, u32 address);
-void Write_U16(u16 var, u32 address);
-void Write_U32(u32 var, u32 address);
-void Write_U64(u64 var, u32 address);
-
-void Write_U16_Swap(u16 var, u32 address);
-void Write_U32_Swap(u32 var, u32 address);
-void Write_U64_Swap(u64 var, u32 address);
-
-// Useful helper functions, used by ARM JIT
-void Write_F64(double var, u32 address);
-
-void DMA_LCToMemory(u32 memAddr, u32 cacheAddr, u32 numBlocks);
-void DMA_MemoryToLC(u32 cacheAddr, u32 memAddr, u32 numBlocks);
-void ClearCacheLine(u32 address);  // Zeroes 32 bytes; address should be 32-byte-aligned
-
-// TLB functions
-void SDRUpdated();
-void InvalidateTLBEntry(u32 address);
-void DBATUpdated();
-void IBATUpdated();
-
-// Result changes based on the BAT registers and MSR.DR.  Returns whether
-// it's safe to optimize a read or write to this address to an unguarded
-// memory access.  Does not consider page tables.
-bool IsOptimizableRAMAddress(u32 address);
-u32 IsOptimizableMMIOAccess(u32 address, u32 accessSize);
-bool IsOptimizableGatherPipeWrite(u32 address);
-
-struct TranslateResult
-{
-  bool valid;
-  bool from_bat;
-  u32 address;
-};
-TranslateResult JitCache_TranslateAddress(u32 address);
-
-constexpr int BAT_INDEX_SHIFT = 17;
-constexpr u32 BAT_PAGE_SIZE = 1 << BAT_INDEX_SHIFT;
-constexpr u32 BAT_MAPPED_BIT = 0x1;
-constexpr u32 BAT_PHYSICAL_BIT = 0x2;
-constexpr u32 BAT_RESULT_MASK = UINT32_C(~0x3);
-using BatTable = std::array<u32, 1 << (32 - BAT_INDEX_SHIFT)>;  // 128 KB
-extern BatTable ibat_table;
-extern BatTable dbat_table;
-inline bool TranslateBatAddess(const BatTable& bat_table, u32* address)
-{
-  u32 bat_result = bat_table[*address >> BAT_INDEX_SHIFT];
-  if ((bat_result & BAT_MAPPED_BIT) == 0)
-    return false;
-  *address = (bat_result & BAT_RESULT_MASK) | (*address & (BAT_PAGE_SIZE - 1));
-  return true;
-}
-
 enum CRBits
 {
   CR_SO = 1,

Source/Core/Core/PowerPC/SignatureDB/MEGASignatureDB.cpp

@@ -16,8 +16,8 @@
 #include "Common/Logging/Log.h"
 #include "Common/StringUtil.h"
 
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PPCSymbolDB.h"
-#include "Core/PowerPC/PowerPC.h"
 
 namespace
 {

Source/Core/Core/PowerPC/SignatureDB/SignatureDB.cpp

@@ -10,8 +10,8 @@
 #include "Common/CommonTypes.h"
 #include "Common/Logging/Log.h"
 #include "Common/StringUtil.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PPCSymbolDB.h"
-#include "Core/PowerPC/PowerPC.h"
 
 // Format Handlers
 #include "Core/PowerPC/SignatureDB/CSVSignatureDB.h"

Source/Core/DolphinQt2/CheatsManager.cpp

@@ -25,6 +25,7 @@
 #include "Core/Core.h"
 #include "Core/Debugger/PPCDebugInterface.h"
 #include "Core/HW/Memmap.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PowerPC.h"
 #include "UICommon/GameFile.h"
 

Source/Core/DolphinQt2/Debugger/CodeViewWidget.cpp

@@ -22,6 +22,7 @@
 #include "Common/StringUtil.h"
 #include "Core/Core.h"
 #include "Core/Debugger/PPCDebugInterface.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PPCAnalyst.h"
 #include "Core/PowerPC/PPCSymbolDB.h"
 #include "Core/PowerPC/PowerPC.h"

Source/Core/DolphinQt2/Debugger/CodeWidget.cpp

@@ -19,6 +19,7 @@
 #include "Core/Core.h"
 #include "Core/Debugger/Debugger_SymbolMap.h"
 #include "Core/HW/CPU.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PPCSymbolDB.h"
 #include "Core/PowerPC/PowerPC.h"
 #include "DolphinQt2/Host.h"

Source/Core/DolphinQt2/Debugger/MemoryViewWidget.cpp

@@ -10,10 +10,13 @@
 #include <QMenu>
 #include <QMouseEvent>
 #include <QScrollBar>
+
+#include <cctype>
 #include <cmath>
 
 #include "Core/Core.h"
 #include "Core/PowerPC/BreakPoints.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PowerPC.h"
 
 #include "DolphinQt2/QtUtils/ActionHelper.h"

Source/Core/DolphinQt2/Debugger/WatchWidget.cpp

@@ -8,6 +8,7 @@
 #include "Common/IniFile.h"
 #include "Core/ConfigManager.h"
 #include "Core/Core.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PowerPC.h"
 
 #include "DolphinQt2/QtUtils/ActionHelper.h"

Source/Core/DolphinQt2/MenuBar.cpp

@@ -28,12 +28,12 @@
 #include "Core/HLE/HLE.h"
 #include "Core/HW/WiiSave.h"
 #include "Core/HW/Wiimote.h"
-#include "Core/Host.h"
 #include "Core/IOS/ES/ES.h"
 #include "Core/IOS/IOS.h"
 #include "Core/IOS/USB/Bluetooth/BTEmu.h"
 #include "Core/Movie.h"
 #include "Core/PowerPC/JitInterface.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PPCAnalyst.h"
 #include "Core/PowerPC/PPCSymbolDB.h"
 #include "Core/PowerPC/PowerPC.h"

Source/Core/DolphinWX/Debugger/CodeView.cpp

@@ -26,8 +26,8 @@
 #include "Common/SymbolDB.h"
 #include "Core/Core.h"
 #include "Core/Host.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PPCAnalyst.h"
-#include "Core/PowerPC/PowerPC.h"
 #include "DolphinWX/Debugger/AssemblerEntryDialog.h"
 #include "DolphinWX/Debugger/CodeView.h"
 #include "DolphinWX/Debugger/DebuggerUIUtil.h"

Source/Core/DolphinWX/Debugger/CodeWindow.cpp

@@ -37,6 +37,7 @@
 #include "Core/PowerPC/BreakPoints.h"
 #include "Core/PowerPC/Gekko.h"
 #include "Core/PowerPC/JitInterface.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PPCSymbolDB.h"
 #include "Core/PowerPC/PPCTables.h"
 #include "Core/PowerPC/PowerPC.h"

Source/Core/DolphinWX/Debugger/MemoryView.cpp

@@ -24,8 +24,8 @@
 #include "Common/StringUtil.h"
 #include "Core/Core.h"
 #include "Core/HW/Memmap.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PPCSymbolDB.h"
-#include "Core/PowerPC/PowerPC.h"
 #include "DolphinWX/Debugger/CodeWindow.h"
 #include "DolphinWX/Debugger/DebuggerUIUtil.h"
 #include "DolphinWX/Debugger/WatchWindow.h"

Source/Core/DolphinWX/Debugger/WatchView.cpp

@@ -2,20 +2,19 @@
 // Licensed under GPLv2+
 // Refer to the license.txt file included.
 
-#include <wx/colour.h>
+#include "DolphinWX/Debugger/WatchView.h"
+
 #include <wx/grid.h>
 #include <wx/menu.h>
 
 #include "Common/GekkoDisassembler.h"
 #include "Core/Core.h"
-#include "Core/HW/Memmap.h"
+#include "Core/PowerPC/MMU.h"
 #include "Core/PowerPC/PowerPC.h"
 #include "DolphinWX/Debugger/BreakpointWindow.h"
 #include "DolphinWX/Debugger/CodeWindow.h"
 #include "DolphinWX/Debugger/DebuggerUIUtil.h"
 #include "DolphinWX/Debugger/MemoryWindow.h"
-#include "DolphinWX/Debugger/RegisterView.h"
-#include "DolphinWX/Debugger/WatchView.h"
 #include "DolphinWX/Debugger/WatchWindow.h"
 #include "DolphinWX/Frame.h"
 #include "DolphinWX/Main.h"