dolphin/Source/DSPSpy/tests/if_test2.ds

; This is the trojan program we send to the DSP from DSPSpy to figure it out.

; A lot of constant definitions.
DSCR:	equ 0xffc9	; DSP DMA Control Reg
DSBL:	equ 0xffcb	; DSP DMA Block Length
DSPA:	equ 0xffcd	; DSP DMA DMEM Address
DSMAH:	equ	0xffce	; DSP DMA Mem Address H
DSMAL:	equ 0xffcf	; DSP DMA Mem Address L

ACSAH:	equ 0xffd4
ACSAL:	equ	0xffd5
ACEAH:	equ	0xffd6
ACEAL:	equ	0xffd7
ACCAH:	equ	0xffd8
ACCAL:	equ	0xffd9
AMDM:	equ	0xffef	; ARAM DMA Request Mask

DIRQ:	equ	0xfffb	; DSP Irq Request
DMBH:	equ	0xfffc	; DSP Mailbox H
DMBL:	equ	0xfffd	; DSP Mailbox L
CMBH:	equ	0xfffe	; CPU Mailbox H
CMBL:	equ 0xffff	; CPU Mailbox L

R00:	equ	0x00
R01:	equ	0x01
R02:	equ	0x02
R03:	equ	0x03
R04:	equ	0x04
R05:	equ	0x05
R06:	equ	0x06
R07:	equ	0x07
R08:	equ	0x08
R09:	equ	0x09
R0A:	equ	0x0a
R0B:	equ	0x0b
R0C:	equ	0x0c
R0D:	equ	0x0d
R0E:	equ	0x0e
R0F:	equ	0x0f
R10:	equ	0x10
R11:	equ	0x11
R12:	equ	0x12
R13:	equ	0x13
R14:	equ	0x14
R15:	equ	0x15
R16:	equ	0x16
R17:	equ	0x17
R18:	equ	0x18
R19:	equ	0x19
R1A:	equ	0x1a
R1B:	equ	0x1b
R1C:	equ	0x1c
R1D:	equ	0x1d
R1E:	equ	0x1e
R1F:	equ	0x1f

ACH0:	equ	0x10
ACH1:	equ	0x11
ACL0:	equ	0x1e
ACL1:	equ	0x1f

DSP_CR_IMEM:	equ		2
DSP_CR_TO_CPU:	equ		1


REGS_BASE:	equ		0x0f80
MEM_HI:			equ		0x0f7E
MEM_LO:			equ		0x0f7F

; CODE STARTS HERE.

; Interrupt vectors 8 vectors, 2 opcodes each

	jmp		irq0
	jmp		irq1
	jmp		irq2
	jmp		irq3
	jmp		irq4
	jmp		irq5
	jmp		irq6
	jmp		irq7
	
; Main code at 0x10
	sbset       #0x02
	sbset       #0x03
	sbclr       #0x04
	sbset       #0x05
	sbset       #0x06

	set16
	lri		$CR, #0x00ff

; Why do we have a main label here?	
main:

	clr         $ACC1
	clr         $ACC0

; get address of memory dump and copy it to DRAM

	call	wait_for_dsp_mbox
	si		@DMBH, #0x8888
	si		@DMBL, #0xdead
	si		@DIRQ, #0x0001

	call	wait_for_cpu_mbox
	lrs		$ACL0, @CMBL
	andi	$acl1, #0x7fff

	sr		@MEM_HI, $ACL1
	sr		@MEM_LO, $ACL0

	lri		$r18, #0
	lri		$r19, #0		;(DSP_CR_IMEM | DSP_CR_TO_CPU)
	lri		$r1a, #0x2000
	lr		$r1c, @MEM_HI
	lr		$r1e, @MEM_LO
	call	do_dma


; get address of registers and DMA them to ram

	call	wait_for_dsp_mbox
	si		@DMBH, #0x8888
	si		@DMBL, #0xbeef
	si		@DIRQ, #0x0001

	call	wait_for_cpu_mbox
	lrs		$ACL0, @CMBL
	andi	$acl1, #0x7fff

	sr		@MEM_HI, $ACL1
	sr		@MEM_LO, $ACL0

	lri		$r18, #REGS_BASE
	lri		$r19, #0		;(DSP_CR_IMEM | DSP_CR_TO_CPU)
	lri		$r1a, #0x80
	lr		$r1c, @MEM_HI
	lr		$r1e, @MEM_LO
	call	do_dma

; Read in all the registers from RAM

	lri		$r00, #REGS_BASE+1
	lrri	$r01, @$r00
	lrri	$r02, @$r00
	lrri	$r03, @$r00
	lrri	$r04, @$r00
	lrri	$r05, @$r00
	lrri	$r06, @$r00
	lrri	$r07, @$r00
	lrri	$r08, @$r00
	lrri	$r09, @$r00
	lrri	$r0a, @$r00
	lrri	$r0b, @$r00
	lrri	$r0c, @$r00
	lrri	$r0d, @$r00
	lrri	$r0e, @$r00
	lrri	$r0f, @$r00
	lrri	$r10, @$r00
	lrri	$r11, @$r00
	lrri	$r12, @$r00
	lrri	$r13, @$r00
	lrri	$r14, @$r00
	lrri	$r15, @$r00
	lrri	$r16, @$r00
	lrri	$r17, @$r00
	lrri	$r18, @$r00
	lrri	$r19, @$r00
	lrri	$r1a, @$r00
	lrri	$r1b, @$r00
	lrri	$r1c, @$r00
	lrri	$r1d, @$r00
	lrri	$r1e, @$r00
	lrri	$r1f, @$r00
	lr		$r00, @REGS_BASE

;  Right here we are at a specific predetermined state.
;  Ideal environment to try instructions.

;  We can call send_back at any time to send data back to the PowerPC.

;  Calling set40 here seemed to crash the dsp tester in strange ways
;  until I added set16 in send_back. Seems clear that it affects something important.

	lri $R04, #0x0000
	lri $R13, #0x0001

	ifg
	lri $R04, #0x1337	
	call send_back

	ifle
	lri $R04, #0x1338	
	call send_back

	lri $R04, #0x0000	
    lri $R13, #0x0002

	ifg
	lri $R04, #0x1337	
	call send_back

	ifle
	lri $R04, #0x1338	
	call send_back

	lri $R04, #0x0000
	lri $R13, #0x0004

	ifg
	lri $R04, #0x1337	
	call send_back

	ifle
	lri $R04, #0x1338	
	call send_back

	lri $R04, #0x0000
	lri $R13, #0x0008

	ifg
	lri $R04, #0x1337	
	call send_back

	ifle
	lri $R04, #0x1338	
	call send_back

	lri $R04, #0x0000
	lri $R13, #0x000a

	ifg
	lri $R04, #0x1337	
	call send_back

	ifle
	lri $R04, #0x1338	
	call send_back	
; We're done - currently we only test one opcode, in this case 0x8600.
; It's possible to test many more in one go - just call send_back after each one.

	jmp ende

; Below here is tons of random leftover test code from whoever last experimented with this.

;	call dump_memory
;	call send_back

    cw 0x00de 
    cw 0x03f1 
    call	send_back
    
    cw 0x0200 
    cw 0x0a60 
    call	send_back
    
    cw 0x1c7e 
    call	send_back
    
    cw 0x8100 
    call	send_back
    
    cw 0x8900 
    call	send_back
    
    cw 0x009f    
    cw 0x00a0 
    call	send_back
    
    cw 0x00de 
    cw 0x03f1 
    call	send_back
    
    cw 0x5d00 
    call	send_back
    
    cw 0x0e50 
    call	send_back
    
    cw 0x0750 
    call	send_back
    
    cw 0x0270 
    call	send_back
    
    cw 0x5d00 
    call	send_back
    
    cw 0x00da    
    cw 0x03f2 
    call	send_back
        
    cw 0x8600 
    call	send_back
     
    JNS g_0c4d
;		cw 0x0290 
;   cw 0x0c4d 
;   call	send_back    JX0
    
    cw 0x00de 
    cw 0x03f3 
    call	send_back
    
    cw 0x5c00 
    call	send_back
 
 		JLE g_0c38  
;   cw 0x0293 
;   cw 0x0c38 				JX3
;		call	send_back
    
    JMP g_0c52
    
;    cw 0x029f 
;    cw 0x0c52 
;		call	send_back    

g_0c38:
    cw 0x00db 
    cw 0x03f7 
    call	send_back
        
    cw 0x009e 
    cw 0x8000 
    call	send_back
    
    cw 0x4600 
    call	send_back
    
    JMP g_0c44
;    cw 0x029f 
;		 cw 0x0c44 
;    call	send_back
    
g_0c3f:    
    cw 0x00db 
    cw 0x03f7 
    call	send_back
    
    cw 0x009e 
    cw 0x8000 
    call	send_back
    
    cw 0x5600 
    call	send_back
    
g_0c44:    
    cw 0x00fe    
    cw 0x03f5 
    call	send_back
    
    cw 0x1fda 
    call	send_back
    
    cw 0x7c00 
    call	send_back
    
    cw 0x1f5e 
    call	send_back
    
    cw 0x00fe 
    cw 0x03f2 
    call	send_back
 
 	JMP g_0c52   
;    cw 0x029f 
;    cw 0x0c52 
;    call	send_back

g_0c4d:
    
    cw 0x00de 
    cw 0x03f4 
    call	send_back
    
    cw 0x5d00 
    call	send_back
 
 	JLE g_0c3f   
;    cw 0x0293 
;    cw 0x0c3f 
;    call	send_back
    
g_0c52:    
    cw 0x8900 
    call	send_back
    
    cw 0x00dd     
    cw 0x03f5 
    call	send_back
        
    cw 0x1501 
    call	send_back
    
    cw 0x8100 
    call	send_back
    
    cw 0x00dc 
    cw 0x03f6 
    call	send_back
    
    cw 0x008b 
    cw 0x009f 
    call	send_back
    
    cw 0x0080 
    cw 0x0a00 
    call	send_back
    
    cw 0x0900 
    call	send_back
    
    BLOOPI #0x50, g_0c65
;    cw 0x1150 
;    cw 0x0c65 
;		call	send_back


    cw 0x1878 
    call	send_back
    
    cw 0x4c00 
    call	send_back
    
    cw 0x1cfe 
    call	send_back
    
    cw 0x001f 
    call	send_back
    
    cw 0x1fd9 
    call	send_back
g_0c65:
    cw 0x1b18 
    call	send_back
    
    cw 0x009f     
    cw 0x0a60 
    call	send_back
    
    cw 0x1fc3 
    call	send_back
    
    cw 0x5c00 
    call	send_back
    
    cw 0x00fe 
    cw 0x03f1 
    call	send_back
    
    cw 0x00fc 
    cw 0x03f6 
    call	send_back
    
    cw 0x008b 
    cw 0xffff 
    call	send_back
    
	
; This is where we jump when we're done testing, see above. 
ende:

	nop
	nop
	nop
	nop
	nop
	nop
	nop
	
; We just fall into a loop, playing dead until someone resets the DSP.	
dead_loop:
	jmp		dead_loop

; Utility function to do DMA.
; r1c:r1e - external address.
; r18     - address in DSP
do_dma:
	sr		@DSMAH, $r1c
	sr		@DSMAL, $r1e
	sr		@DSPA, $r18
	sr		@DSCR, $r19
	sr		@DSBL, $r1a  ; This kicks off the DMA.

; Waits for said DMA to complete by watching a bit in DSCR.
wait_dma:
	LRS		$ACL1, @DSCR
	andcf	$acl1, #0x0004
	JLZ		wait_dma
	RET

; This waits for a mail to arrive in the DSP in-mailbox.
wait_for_dsp_mbox:
	lrs		$ACL1, @DMBH
	andcf	$acl1, #0x8000
	jlz		wait_for_dsp_mbox
	ret

; This waits for the CPU to grab a mail that we just sent from the DSP.
wait_for_cpu_mbox:
	lrs		$ACL1, @cmbh
	andcf	$acl1, #0x8000
	jlnz	wait_for_cpu_mbox
	ret

; IRQ handlers. Not entirely sure what good they do currently.
irq0:
	lri		$acl0, #0x0000
	jmp		irq
irq1:
	lri		$acl0, #0x0001
	jmp		irq
irq2:
	lri		$acl0, #0x0002
	jmp		irq
irq3:
	lri		$acl0, #0x0003
	jmp		irq
irq4:
	lri		$acl0, #0x0004
	jmp		irq
irq5:
; No idea what this code is doing.
	set16
	mrr		$r0d, $r1c
	mrr		$r0d, $r1e
	clr		$acc0
	mrr		$r1e, $r0d
	mrr		$r1c, $r0d
	nop     ; Or why there's a nop sled here.
	nop
	nop
	nop
	nop
	nop
	rti
	
	lri		$acl0, #0x0005
	jmp		irq
irq6:
	lri		$acl0, #0x0006
	jmp		irq
irq7:
	lri		$acl0, #0x0007
	jmp		irq

irq:
	lrs		$ACL1, @DMBH
	andcf	$acl1, #0x8000
	jlz		irq
	si		@DMBH, #0x8BAD
	sr		@DMBL, $r0b
;sr		@DMBL, $acl0	
	si		@DIRQ, #0x0001
	halt
	
; DMA:s the current state of the registers back to the PowerPC. To do this,
; it must write the contents of all regs to DRAM.
send_back:
	; make state safe.
	set16
	; store registers to reg table
	sr		@REGS_BASE,  $r00
	lri		$r00, #(REGS_BASE + 1)
	srri	@$r00, $r01
	srri	@$r00, $r02
	srri	@$r00, $r03
	srri	@$r00, $r04
	srri	@$r00, $r05
	srri	@$r00, $r06
	srri	@$r00, $r07
	srri	@$r00, $r08
	srri	@$r00, $r09
	srri	@$r00, $r0a
	srri	@$r00, $r0b
	srri	@$r00, $r0c
	srri	@$r00, $r0d
	srri	@$r00, $r0e
	srri	@$r00, $r0f
	srri	@$r00, $r10
	srri	@$r00, $r11
	srri	@$r00, $r12
	srri	@$r00, $r13
	srri	@$r00, $r14
	srri	@$r00, $r15
	srri	@$r00, $r16
	srri	@$r00, $r17
	srri	@$r00, $r18
	srri	@$r00, $r19
	srri	@$r00, $r1a
	srri	@$r00, $r1b
	srri	@$r00, $r1c
	srri	@$r00, $r1d
	srri	@$r00, $r1e
	srri	@$r00, $r1f

; Regs are stored. Prepare DMA.
	lri		$r18, #0x0000
	lri		$r19, #1		;(DSP_CR_IMEM | DSP_CR_TO_CPU)
	lri		$r1a, #0x200
	lr		$r1c, @MEM_HI
	lr		$r1e, @MEM_LO

	lri		$r01, #8+8

; Now, why are we looping here?
	bloop	$r01, dma_copy
	call	do_dma
	addi	$r1e, #0x200
	mrr		$r1f, $r18
	addi	$r1f, #0x100
	mrr		$r18, $r1f
	nop

dma_copy:
	nop

; Wait for the CPU to send us a mail.	
	call	wait_for_dsp_mbox
	si		@DMBH, #0x8888
	si		@DMBL, #0xfeeb
	si		@DIRQ, #0x0001
	
; wait for the CPU to recieve our response before we execute the next op	
	call	wait_for_cpu_mbox
	lrs		$ACL0, @CMBL
	andi	$acl1, #0x7fff

; Restore all regs again so we're ready to execute another op.
	lri		$r00, #REGS_BASE+1
	lrri	$r01, @$r00
	lrri	$r02, @$r00
	lrri	$r03, @$r00
	lrri	$r04, @$r00
	lrri	$r05, @$r00
	lrri	$r06, @$r00
	lrri	$r07, @$r00
	lrri	$r08, @$r00
	lrri	$r09, @$r00
	lrri	$r0a, @$r00
	lrri	$r0b, @$r00
	lrri	$r0c, @$r00
	lrri	$r0d, @$r00
	lrri	$r0e, @$r00
	lrri	$r0f, @$r00
	lrri	$r10, @$r00
	lrri	$r11, @$r00
	lrri	$r12, @$r00
	lrri	$r13, @$r00
	lrri	$r14, @$r00
	lrri	$r15, @$r00
	lrri	$r16, @$r00
	lrri	$r17, @$r00
	lrri	$r18, @$r00
	lrri	$r19, @$r00
	lrri	$r1a, @$r00
	lrri	$r1b, @$r00
	lrri	$r1c, @$r00
	lrri	$r1d, @$r00
	lrri	$r1e, @$r00
	lrri	$r1f, @$r00
	lr		$r00, @REGS_BASE
	
	ret   ; from send_back
	
; If you are in set40 mode, use this instead of send_back if you want to stay
; in set40 mode.
send_back_40:
	set16
	call	send_back	
	set40
	ret

; This one's odd. Doesn't look like it should work since it uses acl0 but 
; increments acm0... (acc0)	
dump_memory:
	lri		$r02, #0x0000
	lri		$acl0, #0x1000
	
	lri		$r01, #0x1000		
	bloop	$r01, _fill_loop2			
	
	mrr $r03, $acl0
	nx'ld   : $AX0.H, $AX1.H, @$AR0
	
	mrr $r1f, $r00
	mrr $r00, $r02
	srri @$r00, $r1b
	mrr $r02, $r00
	mrr $r00, $r1f
	
	addis $acc0, #0x1

_fill_loop2:
	nop
	ret   ; from dump_memory