bsnes/Core/apu.h

147 lines
4.4 KiB
C

#ifndef apu_h
#define apu_h
#include <stdbool.h>
#include <stdint.h>
#include "gb_struct_def.h"
#ifdef GB_INTERNAL
/* Divides nicely and never overflows with 4 channels and 8 volume levels */
#define MAX_CH_AMP 0x1FFE
#define CH_STEP (MAX_CH_AMP/0xF/7)
#endif
/* APU ticks are 2MHz, triggered by an internal APU clock. */
typedef struct
{
int16_t left;
int16_t right;
} GB_sample_t;
typedef struct
{
double left;
double right;
} GB_double_sample_t;
enum GB_CHANNELS {
GB_SQUARE_1,
GB_SQUARE_2,
GB_WAVE,
GB_NOISE,
GB_N_CHANNELS
};
typedef struct
{
bool global_enable;
uint8_t apu_cycles;
uint8_t samples[GB_N_CHANNELS];
bool is_active[GB_N_CHANNELS];
uint8_t div_divider; // The DIV register ticks the APU at 512Hz, but is then divided
// once more to generate 128Hz and 64Hz clocks
uint8_t lf_div; // The APU runs in 2MHz, but channels 1, 2 and 4 run in 1MHZ so we divide
// need to divide the signal.
uint8_t square_sweep_countdown; // In 128Hz
uint8_t square_sweep_calculate_countdown; // In 2 MHz
uint16_t new_sweep_sample_legnth;
uint16_t shadow_sweep_sample_legnth;
bool sweep_enabled;
bool sweep_decreasing;
struct {
uint16_t pulse_length; // Reloaded from NRX1 (xorred), in 256Hz DIV ticks
uint8_t current_volume; // Reloaded from NRX2
uint8_t volume_countdown; // Reloaded from NRX2
uint8_t current_sample_index;
uint16_t sample_countdown; // in APU ticks (Reloaded from sample_length, xorred $7FF)
uint16_t sample_length; // From NRX3, NRX4, in APU ticks
bool length_enabled; // NRX4
} square_channels[2];
struct {
bool enable; // NR30
uint16_t pulse_length; // Reloaded from NR31 (xorred), in 256Hz DIV ticks
uint8_t shift; // NR32
uint16_t sample_length; // NR33, NR34, in APU ticks
bool length_enabled; // NR34
uint16_t sample_countdown; // in APU ticks (Reloaded from sample_length, xorred $7FF)
uint8_t current_sample_index;
uint8_t current_sample; // Current sample before shifting.
int8_t wave_form[32];
bool wave_form_just_read;
} wave_channel;
struct {
uint16_t pulse_length; // Reloaded from NR41 (xorred), in 256Hz DIV ticks
uint8_t current_volume; // Reloaded from NR42
uint8_t volume_countdown; // Reloaded from NR42
uint16_t lfsr;
bool narrow;
uint16_t sample_countdown; // in APU ticks (Reloaded from sample_length)
uint16_t sample_length; // From NR43, in APU ticks
bool length_enabled; // NR44
uint8_t alignment; // If (NR43 & 7) != 0, samples are aligned to 512KHz clock instead of
// 1MHz. This variable keeps track of the alignment.
} noise_channel;
} GB_apu_t;
typedef enum {
GB_HIGHPASS_OFF, // Do not apply any filter, keep DC offset
GB_HIGHPASS_ACCURATE, // Apply a highpass filter similar to the one used on hardware
GB_HIGHPASS_REMOVE_DC_OFFSET, // Remove DC Offset without affecting the waveform
GB_HIGHPASS_MAX
} GB_highpass_mode_t;
typedef struct {
unsigned sample_rate;
GB_sample_t *buffer;
size_t buffer_size;
size_t buffer_position;
bool stream_started; /* detects first copy request to minimize lag */
volatile bool copy_in_progress;
volatile bool lock;
double sample_cycles;
// Samples are NOT normalized to MAX_CH_AMP * 4 at this stage!
unsigned cycles_since_render;
unsigned last_update[GB_N_CHANNELS];
GB_sample_t current_sample[GB_N_CHANNELS];
GB_sample_t summed_samples[GB_N_CHANNELS];
GB_highpass_mode_t highpass_mode;
double highpass_rate;
GB_double_sample_t highpass_diff;
} GB_apu_output_t;
void GB_set_sample_rate(GB_gameboy_t *gb, unsigned int sample_rate);
void GB_apu_copy_buffer(GB_gameboy_t *gb, GB_sample_t *dest, size_t count);
size_t GB_apu_get_current_buffer_length(GB_gameboy_t *gb);
void GB_set_highpass_filter_mode(GB_gameboy_t *gb, GB_highpass_mode_t mode);
#ifdef GB_INTERNAL
void GB_apu_write(GB_gameboy_t *gb, uint8_t reg, uint8_t value);
uint8_t GB_apu_read(GB_gameboy_t *gb, uint8_t reg);
void GB_apu_div_event(GB_gameboy_t *gb);
void GB_apu_init(GB_gameboy_t *gb);
void GB_apu_run(GB_gameboy_t *gb);
#endif
#endif /* apu_h */