[This WIP was made after byuu's forum closed, so byuu only gave a one-line
description -Ed.]
byuu says:
This splits ColecoVision, SG-1000/SC-3000 away from Master System/Game Gear.
Was getting too crowded in there.
byuu says:
Changelog:
- higan: readded support for soft-reset to Famicom, Super Famicom,
Mega Drive cores (work in progress)
- handhelds lack soft reset obviously
- the PC Engine also lacks a physical reset button
- the Master System's reset button acts like a gamepad button, so
can't show up in the menu
- Mega Drive: power cycle wasn't initializing CPU (M68K) or APU (Z80)
RAM
- Super Famicom: fix SPC700 opcode 0x3b regression; fixes Majuu Ou
[Jonas Quinn]
- Super Famicom: fix SharpRTC save regression; fixes Dai Kaijuu
Monogatari II's real-time clock [Talarubi]
- Super Famicom: fix EpsonRTC save regression; fixes Tengai Makyou
Zero's real-time clock [Talarubi]
- Super Famicom: removed `*::init()` functions, as they were never used
- Super Famicom: removed all but two `*::load()` functions, as they
were not used
- higan: added option to auto-save backup RAM every five seconds
(enabled by default)
- this is in case the emulator crashes, or there's a power outage;
turn it off under advanced settings if you want
- libco: updated license from public domain to ISC, for consistency
with nall, ruby, hiro
- nall: Linux compiler defaults to g++; override with g++-version if
g++ is <= 4.8
- FreeBSD compiler default is going to remain g++49 until my dev
box OS ships with g++ >= 4.9
Errata: I have weird RAM initialization constants, thanks to hex_usr
and onethirdxcubed for both finding this:
http://wiki.nesdev.com/w/index.php?title=CPU_power_up_state&diff=11711&oldid=11184
I'll remove this in the next WIP.
Added LICENSE.txt and GPLv3.txt. Also updated libco documentation.
After discussion with byuu, libco gets a more specific ISC license
to match nall, ruby and hiro. higan, as clarified in LICENSE.txt,
continues to be GPL version 3 only (no "or later" clause).
byuu says:
Changelog:
- I caved on the `samples[] = {0.0}` thing, but I'm very unhappy about it
- if it's really invalid C++, then GCC needs to stop accepting it
in strict `-std=c++14` mode
- Emulator::Interface::Information::resettable is gone
- Emulator::Interface::reset() is gone
- FC, SFC, MD cores updated to remove soft reset behavior
- split GameBoy::Interface into GameBoyInterface,
GameBoyColorInterface
- split WonderSwan::Interface into WonderSwanInterface,
WonderSwanColorInterface
- PCE: fixed off-by-one scanline error [hex_usr]
- PCE: temporary hack to prevent crashing when VDS is set to < 2
- hiro: Cocoa: removed (u)int(#) constants; converted (u)int(#)
types to (u)int_(#)t types
- icarus: replaced usage of unique with strip instead (so we don't
mess up frameworks on macOS)
- libco: added macOS-specific section marker [Ryphecha]
So ... the major news this time is the removal of the soft reset
behavior. This is a major!! change that results in a 100KiB diff file,
and it's very prone to accidental mistakes!! If anyone is up for
testing, or even better -- looking over the code changes between v102r01
and v102r02 and looking for any issues, please do so. Ideally we'll want
to test every NES mapper type and every SNES coprocessor type by loading
said games and power cycling to make sure the games are all cleanly
resetting. It's too big of a change for me to cover there not being any
issues on my own, but this is truly critical code, so yeah ... please
help if you can.
We technically lose a bit of hardware documentation here. The soft reset
events do all kinds of interesting things in all kinds of different
chips -- or at least they do on the SNES. This is obviously not ideal.
But in the process of removing these portions of code, I found a few
mistakes I had made previously. It simplifies resetting the system state
a lot when not trying to have all the power() functions call the reset()
functions to share partial functionality.
In the future, the goal will be to come up with a way to add back in the
soft reset behavior via keyboard binding as with the Master System core.
What's going to have to happen is that the key binding will have to send
a "reset pulse" to every emulated chip, and those chips are going to
have to act independently to power() instead of reusing functionality.
We'll get there eventually, but there's many things of vastly greater
importance to work on right now, so it'll be a while. The information
isn't lost ... we'll just have to pull it out of v102 when we are ready.
Note that I left the SNES reset vector simulation code in, even though
it's not possible to trigger, for the time being.
Also ... the Super Game Boy core is still disconnected. To be honest, it
totally slipped my mind when I released v102 that it wasn't connected
again yet. This one's going to be pretty tricky to be honest. I'm
thinking about making a third GameBoy::Interface class just for SGB, and
coming up with some way of bypassing platform-> calls when in this
mode.
byuu says:
Changelog:
- added 30 new PAL games to icarus (courtesy of Mikerochip)
- new version of libco no longer requires mprotect nor W|X permissions
- nall: default C compiler to -std=c11 instead of -std=c99
- nall: use `-fno-strict-aliasing` during compilation
- updated nall/certificates (hopefully for the last time)
- updated nall/http to newer coding conventions
- nall: improve handling of range() function
I didn't really work on higan at all, this is mostly just a release
because lots of other things have changed.
The most interesting is `-fno-strict-aliasing` ... basically, it joins
`-fwrapv` as being "stop the GCC developers from doing *really* evil
shit that could lead to security vulnerabilities or instabilities."
For the most part, it's a ~2% speed penalty for higan. Except for the
Sega Genesis, where it's a ~10% speedup. I have no idea how that's
possible, but clearly something's going very wrong with strict aliasing
on the Genesis core.
So ... it is what it is. If you need the performance for the non-Genesis
cores, you can turn it off in your builds. But I'm getting quite sick of
C++'s "surprises" and clever compiler developers, so I'm keeping it on
in all of my software going forward.
byuu says:
Note: for Windows users, please go to nall/intrinsics.hpp line 60 and
correct the typo from "DISPLAY_WINDOW" to "DISPLAY_WINDOWS" before
compiling, otherwise things won't work at all.
This will be a really major WIP for the core SNES emulation, so please
test as thoroughly as possible.
I rewrote the 65816 CPU core's dispatcher from a jump table to a switch
table. This was so that I could pass class variables as parameters to
opcodes without crazy theatrics.
With that, I killed the regs.r[N] stuff, the flag_t operator|=, &=, ^=
stuff, and all of the template versions of opcodes.
I also removed some stupid pointless flag tests in xcn and pflag that
would always be true.
I sure hope that AWJ is happy with this; because this change was so that
my flag assignments and branch tests won't need to build regs.P into
a full 8-bit variable anymore.
It does of course incur a slight performance hit when you pass in
variables by-value to functions, but it should help with binary size
(and thus cache) by reducing a lot of extra functions. (I know I could
have used template parameters for some things even with a switch table,
but chose not to for the aforementioned reasons.)
Overall, it's about a ~1% speedup from the previous build. The CPU core
instructions were never a bottleneck, but I did want to fix the P flag
building stuff because that really was a dumb mistake v_v'
byuu says:
This release marks a major step forward, offering full low-level
emulation of all four DSP coprocessors based on the NEC uPD77C25
processor core. Many people were responsible for this milestone: Dr.
Decapitator for the actual decapping and extraction; Lord Nightmare for
the cartridges and some special analysis tools; myself, Jonas Quinn and
Cydrak for the uPD77C25 emulation; and all of the donors who raised the
necessary $1,000 for the necessary hardware and equipment needed to pull
this all off. To say thanks to the donors, I am releasing the uPD77C25
emulation core to the public domain, so that everyone can benefit from
it.
All four DSP emulations will be improved by this by way of having
realistic timing; the DSP-4 will benefit further as the high-level
emulation was incomplete and somewhat buggy; and the DSP-3 will benefit
the most as the high-levle emulation there was not complete enough to be
playable. As a result, most notably, this means bsnes v073 is the first
emulator to fully be able to play SD Gundam GX (J)!
As bsnes' primary goal is accuracy, the LLE DSP support renders the old
HLE DSP support obsolete. Ergo, I have removed the 166KB of HLE source
code, and replaced it with the uPD77C25 core, which comprises a mere
20KB of source code. As this LLE module supports save states, this also
means that for the first time, DSP-3 and DSP-4 games have save state
support.
On the other hand, this also means that to run any DSP game, you will
need the appropriate program ROM. As these are copyrighted, I cannot
distribute them nor tell you where to get them. All I can do is provide
you with the necessary filenames and hashes.
Changelog (since v072 release):
* added NEC uPD77C25 emulation core
* added low-level emulation of the DSP-1, DSP-1B, DSP-2, DSP-3, DSP-4
coprocessors
* removed high-level emulation of the DSP-n coprocessors
* added blargg's libco::ppc.c module, which is far more portable, even
running on the PS3
* added software filter support via binary plugins
* added debugger (currently Linux-only); but it is as yet unstable
* added pause shortcut
* updated mightymo's cheat code database
This release greatly polishes the user interface, adds a new cheat code search utility, adds the snesfilter library, and adds Qt-based GUI support to both snesfilter and snesreader. snesfilter gains 2xSaI, Super 2xSaI and Super Eagle support, plus full configuration for both the NTSC and scanline filters; and snesreader gains support support for multi-file ROM archives (eg GoodMerge sets.)
Statically linking Qt to bsnes, snesfilter and snesreader would be too prohibitive size-wise (~10MB or so.) I have to link dynamically so that all three can share the same Qt runtime, which gets all of bsnes and its modules to ~1MB (including the debugger build); and Qt itself to about ~2.5MB.
However, there is some bad news. There's a serious bug in MinGW 4.4+, where it is not generating profile-guided input files (*.gcno files.) There is also a serious bug in Qt 4.5.2/Windows when using dynamic linking: the library is hanging indefinitely, forcing me to manually terminate the process upon exit. This prevents the creation of profile-guided output files (*.gcda files.) It would be tough enough to work around one, but facing both of these issues at once is too much.
I'm afraid I have no choice but to disable profile-guided optimizations until these issues can be addressed. I did not know about these bugs until trying to build the official v053 release, so it's too late to revert to an all-in-one binary now. And I'm simply not willing to stop releasing new builds because of bugs in third-party software. As soon as I can work around this, I'll post a new optimized binary. In the mean time, despite the fact that this release is actually more optimized, please understand that the Windows binary will run approximately ~10% slower than previous releases. I recommend keeping v052 for now if you need the performance. Linux and OS X users are unaffected.
Changelog:
- save RAM is initialized to 0xff again to work around Ken Griffey Jr Baseball issue
- libco adds assembly-optimized targets for Win64 and PPC-ELF [the latter courtesy of Kernigh]
- libco/x86 and libco/amd64 use pre-assembled blocks now, obviates need for custom compilation flags
- added a new cheat code search utility to the tools menu
- separated filters from main bsnes binary to libsnesfilter / snesfilter.dll
- added 2xSaI, Super 2xSaI and Super Eagle filters [kode54]
- added full configuration settings for NTSC and scanline filters (12+ new options)
- further optimized HQ2x filter [blargg]
- added Vsync support to the Mac OS X OpenGL driver
- added folder creation button to custom file load dialog
- fixed a few oddities with loading of "game folders" (see older news for an explanation on what this is)
- updated to blargg's file_extractor v1.0.0
- added full support for multi-file archives (eg GoodMerge sets)
- split multi-cart loading again (BS-X, Sufami Turbo, etc) as required for multi-file support
- cleaned up handling of file placement detection for save files (.srm, .cht, etc)
- file load dialog now remembers your previous folder path across runs even without a custom games folder assigned
- windows now save their exact positioning and size across runs, they no longer forcibly center
- menus now have radio button and check box icons where appropriate
- debugger's hex editor now has a working scrollbar widget
- added resize splitter to settings and tools windows
- worked around Qt style sheet bug where subclassed widgets were not properly applying style properties
A new version of bsnes has been released. It contains a few minor emulation fixes, as well as user interface improvements. Behind the scenes, the source has been cleaned up more in preparation for running the CPU and PPU (video processor) separately from each other (eg with no enslavement.) This is required for implementing a clock cycle based PPU renderer.
- Greatly improved invalid DMA transfer behavior, should be nearly perfect now
- Major code cleanup -- most importantly, almost all PPU timing-related settings moved back to PPU, from CPU
- Added option to auto-detect file type by inspecting file headers rather than file extensions
- Rewrote video filter system to move it out of the emulation core -- HQ2x and Scale2x will work even in hires and interlace modes now, 50% scanline filter added
- Re-added bsnes window icon
- Added new controller graphic when assigning joypad keys [FitzRoy]
- Redundant "Advanced" panel settings which can be configured via the GUI are no longer displayed
- Improved speed regulation settings
- XP and Vista themes will now apply to bsnes controls
- Added "Path Settings" window to allow easy selection of default file directories
- Tab key now mostly works throughout most of the GUI (needs improvement)
- Main window will no longer disappear when setting a video multipler which results in a window size larger than the current desktop resolution
- Added two new advanced options: one to control GUI window opacity, and one to adjust the statusbar text
byuu