byuu says:
Changelog:
- processor/gsu: minor code cleanup
- processor/hg51b: renamed reg(Read,Write) to register(Read,Write)
- processor/lr35902: minor code cleanup
- processor/spc700: completed code cleanup (sans disassembler)
- no longer uses internal global state inside instructions
- processor/spc700: will no longer hang the emulator if stuck in a WAI
(SLEEP) or STP (STOP) instruction
- processor/spc700: fixed bug in handling of OR1 and AND1 instructions
- processor/z80: minor code cleanup
- sfc/dsp: revert to initializing registers to 0x00; save for
ENDX=random(), FLG=0xe0 [Jonas Quinn]
Major testing of the SNES game library would be appreciated, now that
its CPU cores have all been revised.
We know the DSP registers read back as randomized data ... mostly, but
there are apparently internal latches, which we can't emulate with the
current DSP design. So until we know which registers have separate
internal state that actually *is* initialized, I'm going to play it safe
and not break more games.
Thanks again to Jonas Quinn for the continued research into this issue.
EDIT: that said ... `MD works if((ENDX&0x30) > 0)` is only a 3:4 chance
that the game will work. That seems pretty unlikely that the odds of it
working are that low, given hardware testing by others in the past :/ I
thought if worked if `PITCH != 0` before, which would have been way more
likely.
The two remaining CPU cores that need major cleanup efforts are the
LR35902 and ARM cores. Both are very large, complicated, annoying cores
that will probably be better off as full rewrites from scratch. I don't
think I want to delay v103 in trying to accomplish that, however.
So I think it'll be best to focus on allowing the Mega Drive core to not
lock when processors are frozen waiting on a response from other
processors during a save state operation. Then we should be good for a
new release.
byuu says:
Changelog:
- I caved on the `samples[] = {0.0}` thing, but I'm very unhappy about it
- if it's really invalid C++, then GCC needs to stop accepting it
in strict `-std=c++14` mode
- Emulator::Interface::Information::resettable is gone
- Emulator::Interface::reset() is gone
- FC, SFC, MD cores updated to remove soft reset behavior
- split GameBoy::Interface into GameBoyInterface,
GameBoyColorInterface
- split WonderSwan::Interface into WonderSwanInterface,
WonderSwanColorInterface
- PCE: fixed off-by-one scanline error [hex_usr]
- PCE: temporary hack to prevent crashing when VDS is set to < 2
- hiro: Cocoa: removed (u)int(#) constants; converted (u)int(#)
types to (u)int_(#)t types
- icarus: replaced usage of unique with strip instead (so we don't
mess up frameworks on macOS)
- libco: added macOS-specific section marker [Ryphecha]
So ... the major news this time is the removal of the soft reset
behavior. This is a major!! change that results in a 100KiB diff file,
and it's very prone to accidental mistakes!! If anyone is up for
testing, or even better -- looking over the code changes between v102r01
and v102r02 and looking for any issues, please do so. Ideally we'll want
to test every NES mapper type and every SNES coprocessor type by loading
said games and power cycling to make sure the games are all cleanly
resetting. It's too big of a change for me to cover there not being any
issues on my own, but this is truly critical code, so yeah ... please
help if you can.
We technically lose a bit of hardware documentation here. The soft reset
events do all kinds of interesting things in all kinds of different
chips -- or at least they do on the SNES. This is obviously not ideal.
But in the process of removing these portions of code, I found a few
mistakes I had made previously. It simplifies resetting the system state
a lot when not trying to have all the power() functions call the reset()
functions to share partial functionality.
In the future, the goal will be to come up with a way to add back in the
soft reset behavior via keyboard binding as with the Master System core.
What's going to have to happen is that the key binding will have to send
a "reset pulse" to every emulated chip, and those chips are going to
have to act independently to power() instead of reusing functionality.
We'll get there eventually, but there's many things of vastly greater
importance to work on right now, so it'll be a while. The information
isn't lost ... we'll just have to pull it out of v102 when we are ready.
Note that I left the SNES reset vector simulation code in, even though
it's not possible to trigger, for the time being.
Also ... the Super Game Boy core is still disconnected. To be honest, it
totally slipped my mind when I released v102 that it wasn't connected
again yet. This one's going to be pretty tricky to be honest. I'm
thinking about making a third GameBoy::Interface class just for SGB, and
coming up with some way of bypassing platform-> calls when in this
mode.
byuu says:
Changelog:
- fixed FC AxROM / VRC7 regression
- BitField split to BooleanBitField/NaturalBitField (in preparation
for IntegerBitField)
- BitFieldReference removed
- GB CPU cleaned up
- GB Cartridge + Mappers cleaned up
- SFC CGRAM is now emulated as uint15[256] instead of uint[512]
- sfc/ppu/memory.cpp no longer needed; removed
- purged SFC Debugger hooks for now (some of the operator[] calls were
bypassing them anyway)
Unfortunately, for reasons that defy all semblance of logic, the CGRAM
change caused a slight speed hit. As have the last few changes. We're
now down to around 129.5fps compared to 123.fps for v099 and 134.5fps
at our peak (v099r01-r02).
I really like the style I came up with for the Game Boy mappers to settle
the purpose(ROM,RAM) vs (rom,ram)Purpose naming convention. If I ever get
around to redoing the NES mappers, that's likely the approach I'll take.
byuu says:
Changelog:
- added nall/bit-field.hpp
- updated all CPU cores (sans LR35902 due to some complexities) to use
BitFields instead of bools
- updated as many CPU cores as I could to use BitFields instead of union {
struct { uint8_t ... }; }; pairs
The speed changes are mostly a wash for this. In some instances,
I noticed a ~2-3% speedup (eg SNES emulation), and in others a 2-3%
slowdown (eg Famicom emulation.) It's within the margin of error, so
it's safe to say it has no impact.
This does give us a lot of new useful things, however:
- no more manual reconstruction of flag values from lots of left shifts
and ORs
- no more manual deconstruction of flag values from lots of ANDs
- ability to get completely free aliases to flag groups (eg GSU can
provide alt2, alt1 and also alt (which is alt2,alt1 combined)
- removes the need for the nasty order_lsbN macro hack (eventually will
make higan 100% endian independent)
- saves us from insane compilers that try and do nasty things with
alignment on union-structs
- saves us from insane compilers that try to store bit-field bits in
reverse order
- will allow some really novel new use cases (I'm planning an
instant-decode ARM opcode function, for instance.)
- reduces code size (we can serialize flag registers in one line instead
of one for each flag)
However, I probably won't use it for super critical code that's constantly
reading out register values (eg PPU MMIO registers.) I think there we
would end up with a performance penalty.
byuu says:
Changelog:
- fixed Super Game Boy regression from v096r04 with bottom tile row
flickering
- fixed GB STAT IRQ regression from previous WIP
- Altered Space is now playable
- GBVideoPlayer isn't; but nobody seems to know exactly what weird
hardware quirk that one relies on to work
- ~3-4% speed improvement in SuperFX games by eliminating function<>
callback on register assignments
- most noticeable in Doom in-game; least noticeable on Yoshi's Island
title screen (darn)
- finished GSU core and SuperFX coprocessor code cleanups
- did some more work cleaning up the LR35902 core and GB CPU code
Just a fair warning: don't get your hopes up on these GB
fixes. Cliffhanger now hangs completely (har har), and none of the
other bugs are fixed. We pretty much did all this work just for Altered
Space. So, I hope you like playing Altered Space.
byuu says:
Changelog:
- nall/dsp returns with new iir/biquad.hpp and resampler/cubic.hpp files
- nall/queue.hpp added (simple ring buffer ... nall/vector wouldn't
cause too many moves with FIFO)
- audio streams now only buffer 20ms; so even if multiple audio streams
desync, latency can never exceed 20ms
- replaced blackman windwed sinc FIR hermite audio filter with transposed
direct form II biquadratic sixth-order IIR butterworth filter (better
attenuation of frequencies above 20KHz, faster, no need for decimation,
less code)
- put in experimental eight-tap echo filter (a lot better than what I
had before, but still rather weak)
- substantial cleanups to the SuperFX GSU processor core (slightly
faster, 479KB->100KB object file, 42.7KB->33.4KB source code size,
way less code duplication)
We'll definitely want to test the whole SuperFX library (not many games)
just to make sure there's no regressions caused by this one.
Not sure what I want to do with audio processing effects yet. I've always
really wanted lots of fun controls to customize audio, and now finally
with this new biquad filter, I can finally start implementing real
effects. For instance, an equalizer wouldn't be too complicated anymore.
The new reverb effect is still a poor man's version. I need to find human
readable source for implementing a comb-filter properly. I'm pretty sure
I can already treat nall::queue as an all-pass filter since all that
does is phase shift (fancy audio term for "delay audio"). What's really
going to be hard is figuring out how to expose user-friendly settings for
controlling it. It looks like you need a bunch of coprime coefficients,
and I don't think casual users are going to be able to hand-enter coprime
values to get the echo effect they want. I uh ... don't even know how
to calculate coprime values dynamically right now >_> But we're going
to have to, as they are correlated to the output sampling rate.
We'll definitely want to make some audio profiles so that users can
quickly select pre-configured themes that sound nice, but expose the
underlying coefficients so that they can tweak stuff to their liking. This
isn't just about higan, this is about me trying to learn digital signal
processing, so please don't be too upset about feature creep or anything
on this.
Anyway ... I'm having some difficulties with my audio right now. When
the reverb effect is enabled, there's a bunch of static on system
reset for just a moment. But this should not be possible. nall::queue
is initializing all previous reverb sample elements to 0.0. I don't
understand where static is coming in from. Further, we have the same
issue with both the windowed sinc and the biquad filters ... a bit of
a popping sound when starting a game. Any help tracking this down would
be appreciated.
There's also one really annoying issue ... I can't seem to do reverb
or volume adjustments with normalized samples. If I say "volume *= 0.5"
in higan/audio/audio.cpp line 68, it doesn't just halve the volume, it
adds a whole bunch of distortion. This makes absolutely zero sense to
me. The sample values are between 0.0 (mute) and 1.0 (full volume) here,
so multiplying a double by 0.5 shouldn't cause distortion. So right now,
I'm doing these adjustments with less precision after denormalizing back
to int16. Anyone ever see something like that? :/
byuu says:
Changelog:
- fixed DAS instruction (Judgment Silversword score)
- fixed [VH]TMR_FREQ writes (Judgement Silversword audio after area 20)
- fixed initialization of SP (fixes seven games that were hanging on
startup)
- added SER_STATUS and SER_DATA stubs (fixes four games that were
hanging on startup)
- initialized IEEP data (fixes Super Robot Taisen Compact 2 series)
- note: you'll need to delete your internal.com in WonderSwan
(Color).sys folders
- fixed CMPS and SCAS termination condition (fixes serious bugs in four
games)
- set read/writeCompleted flags for EEPROM status (fixes Tetsujin 28
Gou)
- major code cleanups to SFC/R65816 and SFC/CPU
- mostly refactored disassembler to output strings instead of using
char* buffer
- unrolled all the subfolders on sfc/cpu to a single directory
- corrected casing for all of sfc/cpu and a large portion of
processor/r65816
I kind of went overboard on the code cleanup with this WIP. Hopefully
nothing broke. Any testing one can do with the SFC accuracy core would
be greatly appreciated.
There's still an absolutely huge amount of work left to go, but I do
want to eventually refresh the entire codebase to my current coding
style, which is extremely different from stuff that's been in higan
mostly untouched since ~2006 or so. It's dangerous and fickle work, but
if I don't do it, then the code will be a jumbled mess of several
different styles.
byuu says:
26 hours in, 173 instructions implemented. Although the four segment
prefix opcodes don't actually do anything yet. There's less than 256
actual instructions on the 80186, not sure of the exact count.
Gunpey gets around ~8,200 instructions in before hitting an unsupported
opcode (loop). Riviera goes off the rails on a retf and ends up
executing an endless stream of bad opcodes in RAM =( Both games hammer
the living shit out of the in/out ports pretty much immediately.
byuu says:
Changelog:
- restructured the project and removed a whole bunch of old/dead
directives from higan/GNUmakefile
- huge amounts of work on hiro/cocoa (compiles but ~70% of the
functionality is commented out)
- fixed a masking error in my ARM CPU disassembler [Lioncash]
- SFC: decided to change board cic=(411,413) back to board
region=(ntsc,pal) ... the former was too obtuse
If you rename Boolean (it's a problem with an include from ruby, not
from hiro) and disable all the ruby drivers, you can compile an
OS X binary, but obviously it's not going to do anything.
It's a boring WIP, I just wanted to push out the project structure
change now at the start of this WIP cycle.
byuu says:
Changelog:
- added Cocoa target: higan can now be compiled for OS X Lion
[Cydrak, byuu]
- SNES/accuracy profile hires color blending improvements - fixes
Marvelous text [AWJ]
- fixed a slight bug in SNES/SA-1 VBR support caused by a typo
- added support for multi-pass shaders that can load external textures
(requires OpenGL 3.2+)
- added game library path (used by ananke->Import Game) to
Settings->Advanced
- system profiles, shaders and cheats database can be stored in "all
users" shared folders now (eg /usr/share on Linux)
- all configuration files are in BML format now, instead of XML (much
easier to read and edit this way)
- main window supports drag-and-drop of game folders (but not game files
/ ZIP archives)
- audio buffer clears when entering a modal loop on Windows (prevents
audio repetition with DirectSound driver)
- a substantial amount of code clean-up (probably the biggest
refactoring to date)
One highly desired target for this release was to default to the optimal
drivers instead of the safest drivers, but because AMD drivers don't
seem to like my OpenGL 3.2 driver, I've decided to postpone that. AMD
has too big a market share. Hopefully with v093 officially released, we
can get some public input on what AMD doesn't like.
byuu says:
This will be another massive diff from the previous version.
All of higan was updated to use the new foo& bar syntax, and I also
updated switch statements to be consistent as well (but not in the
disassemblers, was starting to get an RSI just from what I already did.)
phoenix/{windows, cocoa, qt} need to be updated to use "string foo"
instead of "const string& foo", and after that, the major diffs should
be finished.
This archive is the first time I'm posting my copy-on-write,
size+capacity nall::string class, so any feedback on that is welcome as
well.
byuu says:
Basically just a project rename, with s/bsnes/higan and the new icon
from lowkee added in.
It won't compile on Windows because I forgot to update the resource.rc
file, and a path transform command isn't working on Windows.
It was really just meant as a starting point, so that v091 WIPs can flow
starting from .00 with the new name (it overshadows bsnes v091, so
publicly speaking this "shouldn't exist" and will probably be deleted
from Google Code when v092 is ready.)
Tim Allen