byuu says:
Don't let the point release fool you, there are many significant changes in this
release. I will be keeping bsnes releases using a point system until the new
higan release is ready.
Changelog:
- GUI: added high DPI support
- GUI: fixed the state manager image preview
- Windows: added a new waveOut driver with support for dynamic rate control
- Windows: corrected the XAudio 2.1 dynamic rate control support [BearOso]
- Windows: corrected the Direct3D 9.0 fullscreen exclusive window centering
- Windows: fixed XInput controller support on Windows 10
- SFC: added high-level emulation for the DSP1, DSP2, DSP4, ST010, and Cx4
coprocessors
- SFC: fixed a slight rendering glitch in the intro to Megalomania
If the coprocessor firmware is missing, bsnes will fallback on HLE where it is
supported, which is everything other than SD Gundam GX and the two Hayazashi
Nidan Morita Shougi games.
The Windows dynamic rate control works best with Direct3D in fullscreen
exclusive mode. I recommend the waveOut driver over the XAudio 2.1 driver, as it
is not possible to target a single XAudio2 version on all Windows OS releases.
The waveOut driver should work everywhere out of the box.
Note that with DRC, the synchronization source is your monitor, so you will
want to be running at 60hz (NTSC) or 50hz (PAL). If you have an adaptive sync
monitor, you should instead use the WASAPI (exclusive) or ASIO audio driver.
byuu says:
Changelog:
- nall: converted range, iterator, vector to 64-bit
- added (very poor) ColecoVision emulation (including Coleco Adam
expansion)
- added MSX skeleton
- added Neo Geo Pocket skeleton
- moved audio,video,resource folders into emulator folder
- SFC heuristics: BS-X Town cart is "ZBSJ" [hex_usr]
The nall change is for future work on things like BPA: I need to be able
to handle files larger than 4GB. It is extremely possible that there are
still some truncations to 32-bit lurking around, and even more
disastrously, possibly some -1s lurking that won't sign-extend to
`(uint64_t)0-1`. There's a lot more classes left to do: `string`,
`array_view`, `array_span`, etc.
byuu says:
This synchronizes bsnes/higan with many recent internal nall changes.
This will be the last WIP until I am situated in Japan. Apologies for the
bugfixes that didn't get applied yet, I ran out of time.
byuu says:
I added (imperfect) memory conflict timing to the SA1.
Before:
- WRAM↔↔ROM ran 7% too fast
- ROM↔↔ROM ran 100% too fast
- WRAM↔↔IRAM ran 7% too fast
- ROM↔↔IRAM ran 7% too fast
- IRAM↔↔IRAM ran 287% too fast
- BWRAM↔↔BWRAM ran 100% too fast
- HDMA ROM↔↔ROM ran 15% too fast
- HDMA WRAM↔↔ROM ran 15% too fast
- DMA ROM↔↔ROM ran 100% too fast
After:
- ROM↔↔ROM runs 14% too fast
- HDMA WRAM↔↔ROM runs 7% too fast
- DMA ROM↔↔ROM runs 4% too fast
If you enable this with the fast PPU + DSP, your framerate in SA1 games
will drop by 51%. And even if you disable it, you'll still lose 9% speed
in SA1 games, and 2% speed in non-SA1 games, because of changes needed
to make this support possible.
By default, I'm leaving this off. Compile with `-DACCURATE_SA1` (or
uncomment the line in sfc/sfc.hpp) if you want to try it out.
This'll almost certainly cause some SA1 regressions, so I guess we'll
tackle those as they arise.
byuu says:
Changelog:
- fixed bug in Emulator::Game::Memory::operator bool()
- nall: renamed view<string> back to `string_view`
- nall:: implemented `array_view`
- Game Boy: split cartridge-specific input mappings (rumble,
accelerometer) to their own separate ports
- Game Boy: fixed MBC7 accelerometer x-axis
- icarus: Game Boy, Super Famicom, Mega Drive cores output internal
header game titles to heuristics manifests
- higan, icarus, hiro/gtk: improve viewport geometry configuration;
fixed higan crashing bug with XShm driver
- higan: connect Video::poll(),update() functionality
- hiro, ruby: several compilation / bugfixes, should get the macOS
port compiling again, hopefully [Sintendo]
- ruby/video/xshm: fix crashing bug on window resize
- a bit hacky; it's throwing BadAccess Xlib warnings, but they're
not fatal, so I am catching and ignoring them
- bsnes: removed Application::Windows::onModalChange hook that's no
longer needed [Screwtape]
byuu says:
The main thing I worked on today was emulating the MBC7 EEPROM.
And... I have many things to say about that, but not here, and not now...
The missing EEPROM support is why the accelerometer was broken. Although
it's not evidently clear that I'm emulating the actual values
incorrectly. I'll think about it and get it fixed, though.
bsnes went from ~308fps to ~328fps, and I don't even know why. Probably
something somewhere in the 140KB of changes to other things made in this
WIP.
byuu says:
Changes to hiro will break all but the GTK target. Not that it matters
much given that the only ruby drivers that function are all on BSD
anyway.
But if you are fortunate enough to be able to run this ... you'll find
lots of polishing improvements to the bsnes GUI. I posted some
screenshots on Twitter, if anyone were interested.
byuu says:
I stand corrected, I managed to create and even larger diff than ever.
This one weighs in at 309KiB `>__>`
I'll have to create a changelog later, I'm too tired right now to go
through all of that.
byuu says:
This is probably the largest code-change diff I've done in years.
I spent four days working 10-16 hours a day reworking layouts in hiro
completely.
The result is we now have TableLayout, which will allow for better
horizontal+vertical combined alignment.
Windows, GTK2, and now GTK3 are fully supported.
Windows is getting the initial window geometry wrong by a bit.
GTK2 and GTK3 work perfectly. I basically abandoned trying to detect
resize signals, and instead keep a list of all hiro windows that are
allocated, and every time the main loop runs, it will query all of them
to see if they've been resized. I'm disgusted that I have to do this,
but after fighting with GTK for years, I'm about sick of it. GTK was
doing this crazy thing where it would trigger another size-allocate
inside of a previous size-allocate, and so my layouts would be halfway
through resizing all the widgets, and then the size-allocate would kick
off another one. That would end up leaving the rest of the first layout
loop with bad widget sizes. And if I detected a second re-entry and
blocked it, then the entire window would end up with the older geometry.
I started trying to build a message queue system to allow the second
layout resize to occur after the first one completed, but this was just
too much madness, so I went with the simpler solution.
Qt4 has some geometry problems, and doesn't show tab frame layouts
properly yet.
Qt5 causes an ICE error and tanks my entire Xorg display server, so ...
something is seriously wrong there, and it's not hiro's fault. Creating
a dummy Qt5 application without even using hiro, just int main() {
TestObject object; } with object performing a dynamic\_cast to a derived
type segfaults. Memory is getting corrupted where GCC allocates the
vtables for classes, just by linking in Qt. Could be somehow related to
the -fPIC requirement that only Qt5 has ... could just be that FreeBSD
10.1 has a buggy implementation of Qt5. I don't know. It's beyond my
ability to debug, so this one's going to stay broken.
The Cocoa port is busted. I'll fix it up to compile again, but that's
about all I'm going to do.
Many optimizations mean bsnes and higan open faster. GTK2 and GTK3 both
resize windows very quickly now.
higan crashes when you load a game, so that's not good. bsnes works
though.
bsnes also has the start of a localization engine now. Still a long way
to go.
The makefiles received a rather substantial restructuring. Including the
ruby and hiro makefiles will add the necessary compilation rules for
you, which also means that moc will run for the qt4 and qt5 targets, and
windres will run for the Windows targets.
byuu says:
Changelog:
- nall/GNUmakefile: fixed findstring parameter arguments [Screwtape]
- nall/Windows: always include -mthreads -lpthread for all
applications
- nall/memory: code restructuring
I really wanted to work on the new PPU today, but I thought I'd spend a
few minutes making some minor improvements to nall::memory, that was
five and a half hours ago. Now I have a 67KiB diff of changes. Sigh.
byuu says:
Changelog:
- Super Famicom: added support for loading manifests without embedded
mapping information¹
- genius: initial commit
- various Makefile cleanups
¹: so the idea here is to try and aim for a stable manifest format,
and to allow direct transposition of icarus/genius database entries into
manifest files. The exact mechanics of how this is going to work is
currently in flux, but we'll get there.
For right now, `Super Famicom.sys` gains `boards.bml`, which is the raw
database from my board-editor tool, and higan itself tries to load
`boards.bml`, match an entry to game/board from the game's `manifest.bml`
file, and then transform it into the format currently used by higan. It
does this only when the game's `manifest.bml` file lacks a board node.
When such a board node exists, it works as previous versions of higan
did.
The only incompatible change right now is information/title is now
located at game/label. I may transition window title display to just use
the filenames instead.
Longer term, some thought is going to need to go into the format of the
`boards.bml` database itself, and at which point in the process I should
be transforming things.
Give it time, we'll refine this into something nicer.
byuu says:
Changelog:
- added 30 new PAL games to icarus (courtesy of Mikerochip)
- new version of libco no longer requires mprotect nor W|X permissions
- nall: default C compiler to -std=c11 instead of -std=c99
- nall: use `-fno-strict-aliasing` during compilation
- updated nall/certificates (hopefully for the last time)
- updated nall/http to newer coding conventions
- nall: improve handling of range() function
I didn't really work on higan at all, this is mostly just a release
because lots of other things have changed.
The most interesting is `-fno-strict-aliasing` ... basically, it joins
`-fwrapv` as being "stop the GCC developers from doing *really* evil
shit that could lead to security vulnerabilities or instabilities."
For the most part, it's a ~2% speed penalty for higan. Except for the
Sega Genesis, where it's a ~10% speedup. I have no idea how that's
possible, but clearly something's going very wrong with strict aliasing
on the Genesis core.
So ... it is what it is. If you need the performance for the non-Genesis
cores, you can turn it off in your builds. But I'm getting quite sick of
C++'s "surprises" and clever compiler developers, so I'm keeping it on
in all of my software going forward.
byuu says:
Changelog:
- fixed major nall/vector/prepend bug
- renamed hiro/ListView to hiro/TableView
- added new hiro/ListView control which is a simplified abstraction of
hiro/TableView
- updated higan's cheat database window and icarus' scan dialog to use
the new ListView control
- compilation works once again on all platforms (Windows, Cocoa, GTK,
Qt)
- the loki skeleton compiles once again (removed nall/DSP references;
updated port/device ID names)
Small catch: need to capture layout resize events internally in Windows
to call resizeColumns. For now, just resize the icarus window to get it
to use the full window width for list view items.
byuu says:
Changelog:
- nall/vector rewritten from scratch
- higan/audio uses nall/vector instead of raw pointers
- higan/sfc/coprocessor/sdd1 updated with new research information
- ruby/video/glx and ruby/video/glx2: fuck salt glXSwapIntervalEXT!
The big change here is definitely nall/vector. The Windows, OS X and Qt
ports won't compile until you change some first/last strings to
left/right, but GTK will compile.
I'd be really grateful if anyone could stress-test nall/vector. Pretty
much everything I do relies on this class. If we introduce a bug, the
worst case scenario is my entire SFC game dump database gets corrupted,
or the byuu.org server gets compromised. So it's really critical that we
test the hell out of this right now.
The S-DD1 changes mean you need to update your installation of icarus
again. Also, even though the Lunar FMV never really worked on the
accuracy core anyway (it didn't initialize the PPU properly), it really
won't work now that we emulate the hard-limit of 16MiB for S-DD1 games.
Tim Allen